diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 98a0ed52b5c3..66c14961a9b5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -479,7 +479,7 @@ config HPET_TIMER The HPET provides a stable time base on SMP systems, unlike the TSC, but it is more expensive to access, as it is off-chip. You can find the HPET spec at - . + . You can safely choose Y here. However, HPET will only be activated if the platform and the BIOS support this feature. diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3f0a3edf0a57..845ea097383e 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -813,7 +813,7 @@ int __init hpet_enable(void) out_nohpet: hpet_clear_mapping(); - boot_hpet_disable = 1; + hpet_address = 0; return 0; } @@ -836,10 +836,11 @@ static __init int hpet_late_init(void) hpet_address = force_hpet_address; hpet_enable(); - if (!hpet_virt_address) - return -ENODEV; } + if (!hpet_virt_address) + return -ENODEV; + hpet_reserve_platform_timers(hpet_readl(HPET_ID)); for_each_online_cpu(cpu) { diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 67465ed89310..309949e9e1c1 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -168,6 +168,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, + ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, ich_force_enable_hpet); diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 53fdc7ff3870..32b8bbf5003e 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -46,7 +46,7 @@ /* * The High Precision Event Timer driver. * This driver is closely modelled after the rtc.c driver. - * http://www.intel.com/hardwaredesign/hpetspec.htm + * http://www.intel.com/hardwaredesign/hpetspec_1.pdf */ #define HPET_USER_FREQ (64) #define HPET_DRIFT (500) diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index c20171078d1d..e1129fad96dd 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -57,11 +57,6 @@ u32 acpi_pm_read_verified(void) return v2; } -static cycle_t acpi_pm_read_slow(void) -{ - return (cycle_t)acpi_pm_read_verified(); -} - static cycle_t acpi_pm_read(void) { return (cycle_t)read_pmtmr(); @@ -88,6 +83,11 @@ static int __init acpi_pm_good_setup(char *__str) } __setup("acpi_pm_good", acpi_pm_good_setup); +static cycle_t acpi_pm_read_slow(void) +{ + return (cycle_t)acpi_pm_read_verified(); +} + static inline void acpi_pm_need_workaround(void) { clocksource_acpi_pm.read = acpi_pm_read_slow; diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index b9b7fc6ff1eb..e1ece89fe922 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -697,7 +697,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) struct ads7846 *ts = container_of(handle, struct ads7846, timer); int status = 0; - spin_lock_irq(&ts->lock); + spin_lock(&ts->lock); if (unlikely(!get_pendown_state(ts) || device_suspended(&ts->spi->dev))) { @@ -728,7 +728,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) dev_err(&ts->spi->dev, "spi_async --> %d\n", status); } - spin_unlock_irq(&ts->lock); + spin_unlock(&ts->lock); return HRTIMER_NORESTART; } diff --git a/fs/exec.c b/fs/exec.c index 1f59ea079cbb..02d2e120542d 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -773,7 +773,6 @@ static int de_thread(struct task_struct *tsk) struct signal_struct *sig = tsk->signal; struct sighand_struct *oldsighand = tsk->sighand; spinlock_t *lock = &oldsighand->siglock; - struct task_struct *leader = NULL; int count; if (thread_group_empty(tsk)) @@ -811,7 +810,7 @@ static int de_thread(struct task_struct *tsk) * and to assume its PID: */ if (!thread_group_leader(tsk)) { - leader = tsk->group_leader; + struct task_struct *leader = tsk->group_leader; sig->notify_count = -1; /* for exit_notify() */ for (;;) { @@ -863,8 +862,9 @@ static int de_thread(struct task_struct *tsk) BUG_ON(leader->exit_state != EXIT_ZOMBIE); leader->exit_state = EXIT_DEAD; - write_unlock_irq(&tasklist_lock); + + release_task(leader); } sig->group_exit_task = NULL; @@ -873,8 +873,6 @@ static int de_thread(struct task_struct *tsk) no_thread_group: exit_itimers(sig); flush_itimer_signals(); - if (leader) - release_task(leader); if (atomic_read(&oldsighand->count) != 1) { struct sighand_struct *newsighand; diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 3eba43878dcb..bd37078c2d7d 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -42,26 +42,6 @@ enum hrtimer_restart { HRTIMER_RESTART, /* Timer must be restarted */ }; -/* - * hrtimer callback modes: - * - * HRTIMER_CB_SOFTIRQ: Callback must run in softirq context - * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context - * Special mode for tick emulation and - * scheduler timer. Such timers are per - * cpu and not allowed to be migrated on - * cpu unplug. - * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context - * with timer->base lock unlocked - * used for timers which call wakeup to - * avoid lock order problems with rq->lock - */ -enum hrtimer_cb_mode { - HRTIMER_CB_SOFTIRQ, - HRTIMER_CB_IRQSAFE_PERCPU, - HRTIMER_CB_IRQSAFE_UNLOCKED, -}; - /* * Values to track state of the timer * @@ -70,7 +50,6 @@ enum hrtimer_cb_mode { * 0x00 inactive * 0x01 enqueued into rbtree * 0x02 callback function running - * 0x04 callback pending (high resolution mode) * * Special cases: * 0x03 callback function running and enqueued @@ -92,8 +71,7 @@ enum hrtimer_cb_mode { #define HRTIMER_STATE_INACTIVE 0x00 #define HRTIMER_STATE_ENQUEUED 0x01 #define HRTIMER_STATE_CALLBACK 0x02 -#define HRTIMER_STATE_PENDING 0x04 -#define HRTIMER_STATE_MIGRATE 0x08 +#define HRTIMER_STATE_MIGRATE 0x04 /** * struct hrtimer - the basic hrtimer structure @@ -109,8 +87,6 @@ enum hrtimer_cb_mode { * @function: timer expiry callback function * @base: pointer to the timer base (per cpu and per clock) * @state: state information (See bit values above) - * @cb_mode: high resolution timer feature to select the callback execution - * mode * @cb_entry: list head to enqueue an expired timer into the callback list * @start_site: timer statistics field to store the site where the timer * was started @@ -129,7 +105,6 @@ struct hrtimer { struct hrtimer_clock_base *base; unsigned long state; struct list_head cb_entry; - enum hrtimer_cb_mode cb_mode; #ifdef CONFIG_TIMER_STATS int start_pid; void *start_site; @@ -188,15 +163,11 @@ struct hrtimer_clock_base { * @check_clocks: Indictator, when set evaluate time source and clock * event devices whether high resolution mode can be * activated. - * @cb_pending: Expired timers are moved from the rbtree to this - * list in the timer interrupt. The list is processed - * in the softirq. * @nr_events: Total number of timer interrupt events */ struct hrtimer_cpu_base { spinlock_t lock; struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; - struct list_head cb_pending; #ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next; int hres_active; @@ -404,8 +375,7 @@ static inline int hrtimer_active(const struct hrtimer *timer) */ static inline int hrtimer_is_queued(struct hrtimer *timer) { - return timer->state & - (HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING); + return timer->state & HRTIMER_STATE_ENQUEUED; } /* diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index f58a0cf8929a..d6210a97a8ca 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -251,9 +251,6 @@ enum BLOCK_SOFTIRQ, TASKLET_SOFTIRQ, SCHED_SOFTIRQ, -#ifdef CONFIG_HIGH_RES_TIMERS - HRTIMER_SOFTIRQ, -#endif RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ NR_SOFTIRQS diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h index a7c721355549..4f71bf4e628c 100644 --- a/include/linux/posix-timers.h +++ b/include/linux/posix-timers.h @@ -45,7 +45,11 @@ struct k_itimer { int it_requeue_pending; /* waiting to requeue this timer */ #define REQUEUE_PENDING 1 int it_sigev_notify; /* notify word of sigevent struct */ - struct task_struct *it_process; /* process to send signal to */ + struct signal_struct *it_signal; + union { + struct pid *it_pid; /* pid of process to send signal to */ + struct task_struct *it_process; /* for clock_nanosleep */ + }; struct sigqueue *sigq; /* signal queue entry. */ union { struct { diff --git a/include/linux/timex.h b/include/linux/timex.h index 9007313b5b71..998a55d80acf 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -53,46 +53,10 @@ #ifndef _LINUX_TIMEX_H #define _LINUX_TIMEX_H -#include #include -#include - #define NTP_API 4 /* NTP API version */ -/* - * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen - * for a slightly underdamped convergence characteristic. SHIFT_KH - * establishes the damping of the FLL and is chosen by wisdom and black - * art. - * - * MAXTC establishes the maximum time constant of the PLL. With the - * SHIFT_KG and SHIFT_KF values given and a time constant range from - * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours, - * respectively. - */ -#define SHIFT_PLL 4 /* PLL frequency factor (shift) */ -#define SHIFT_FLL 2 /* FLL frequency factor (shift) */ -#define MAXTC 10 /* maximum time constant (shift) */ - -/* - * SHIFT_USEC defines the scaling (shift) of the time_freq and - * time_tolerance variables, which represent the current frequency - * offset and maximum frequency tolerance. - */ -#define SHIFT_USEC 16 /* frequency offset scale (shift) */ -#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) -#define PPM_SCALE_INV_SHIFT 19 -#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ - PPM_SCALE + 1) - -#define MAXPHASE 500000000l /* max phase error (ns) */ -#define MAXFREQ 500000 /* max frequency error (ns/s) */ -#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) -#define MINSEC 256 /* min interval between updates (s) */ -#define MAXSEC 2048 /* max interval between updates (s) */ -#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */ - /* * syscall interface - used (mainly by NTP daemon) * to discipline kernel clock oscillator @@ -199,8 +163,45 @@ struct timex { #define TIME_BAD TIME_ERROR /* bw compat */ #ifdef __KERNEL__ +#include +#include +#include + #include +/* + * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen + * for a slightly underdamped convergence characteristic. SHIFT_KH + * establishes the damping of the FLL and is chosen by wisdom and black + * art. + * + * MAXTC establishes the maximum time constant of the PLL. With the + * SHIFT_KG and SHIFT_KF values given and a time constant range from + * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours, + * respectively. + */ +#define SHIFT_PLL 4 /* PLL frequency factor (shift) */ +#define SHIFT_FLL 2 /* FLL frequency factor (shift) */ +#define MAXTC 10 /* maximum time constant (shift) */ + +/* + * SHIFT_USEC defines the scaling (shift) of the time_freq and + * time_tolerance variables, which represent the current frequency + * offset and maximum frequency tolerance. + */ +#define SHIFT_USEC 16 /* frequency offset scale (shift) */ +#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) +#define PPM_SCALE_INV_SHIFT 19 +#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ + PPM_SCALE + 1) + +#define MAXPHASE 500000000l /* max phase error (ns) */ +#define MAXFREQ 500000 /* max frequency error (ns/s) */ +#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) +#define MINSEC 256 /* min interval between updates (s) */ +#define MAXSEC 2048 /* max interval between updates (s) */ +#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */ + /* * kernel variables * Note: maximum error = NTP synch distance = dispersion + delay / 2; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 47e63349d1b2..bda9cb924276 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -442,22 +442,6 @@ static inline void debug_hrtimer_activate(struct hrtimer *timer) { } static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { } #endif -/* - * Check, whether the timer is on the callback pending list - */ -static inline int hrtimer_cb_pending(const struct hrtimer *timer) -{ - return timer->state & HRTIMER_STATE_PENDING; -} - -/* - * Remove a timer from the callback pending list - */ -static inline void hrtimer_remove_cb_pending(struct hrtimer *timer) -{ - list_del_init(&timer->cb_entry); -} - /* High resolution timer related functions */ #ifdef CONFIG_HIGH_RES_TIMERS @@ -651,6 +635,8 @@ static inline void hrtimer_init_timer_hres(struct hrtimer *timer) { } +static void __run_hrtimer(struct hrtimer *timer); + /* * When High resolution timers are active, try to reprogram. Note, that in case * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry @@ -661,31 +647,14 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, struct hrtimer_clock_base *base) { if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) { - - /* Timer is expired, act upon the callback mode */ - switch(timer->cb_mode) { - case HRTIMER_CB_IRQSAFE_PERCPU: - case HRTIMER_CB_IRQSAFE_UNLOCKED: - /* - * This is solely for the sched tick emulation with - * dynamic tick support to ensure that we do not - * restart the tick right on the edge and end up with - * the tick timer in the softirq ! The calling site - * takes care of this. Also used for hrtimer sleeper ! - */ - debug_hrtimer_deactivate(timer); - return 1; - case HRTIMER_CB_SOFTIRQ: - /* - * Move everything else into the softirq pending list ! - */ - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - timer->state = HRTIMER_STATE_PENDING; - return 1; - default: - BUG(); - } + /* + * XXX: recursion check? + * hrtimer_forward() should round up with timer granularity + * so that we never get into inf recursion here, + * it doesn't do that though + */ + __run_hrtimer(timer); + return 1; } return 0; } @@ -724,11 +693,6 @@ static int hrtimer_switch_to_hres(void) return 1; } -static inline void hrtimer_raise_softirq(void) -{ - raise_softirq(HRTIMER_SOFTIRQ); -} - #else static inline int hrtimer_hres_active(void) { return 0; } @@ -747,7 +711,6 @@ static inline int hrtimer_reprogram(struct hrtimer *timer, { return 0; } -static inline void hrtimer_raise_softirq(void) { } #endif /* CONFIG_HIGH_RES_TIMERS */ @@ -890,10 +853,7 @@ static void __remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, unsigned long newstate, int reprogram) { - /* High res. callback list. NOP for !HIGHRES */ - if (hrtimer_cb_pending(timer)) - hrtimer_remove_cb_pending(timer); - else { + if (timer->state & HRTIMER_STATE_ENQUEUED) { /* * Remove the timer from the rbtree and replace the * first entry pointer if necessary. @@ -953,7 +913,7 @@ hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_n { struct hrtimer_clock_base *base, *new_base; unsigned long flags; - int ret, raise; + int ret; base = lock_hrtimer_base(timer, &flags); @@ -988,26 +948,8 @@ hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_n enqueue_hrtimer(timer, new_base, new_base->cpu_base == &__get_cpu_var(hrtimer_bases)); - /* - * The timer may be expired and moved to the cb_pending - * list. We can not raise the softirq with base lock held due - * to a possible deadlock with runqueue lock. - */ - raise = timer->state == HRTIMER_STATE_PENDING; - - /* - * We use preempt_disable to prevent this task from migrating after - * setting up the softirq and raising it. Otherwise, if me migrate - * we will raise the softirq on the wrong CPU. - */ - preempt_disable(); - unlock_hrtimer_base(timer, &flags); - if (raise) - hrtimer_raise_softirq(); - preempt_enable(); - return ret; } EXPORT_SYMBOL_GPL(hrtimer_start_range_ns); @@ -1192,75 +1134,6 @@ int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp) } EXPORT_SYMBOL_GPL(hrtimer_get_res); -static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base) -{ - spin_lock_irq(&cpu_base->lock); - - while (!list_empty(&cpu_base->cb_pending)) { - enum hrtimer_restart (*fn)(struct hrtimer *); - struct hrtimer *timer; - int restart; - int emulate_hardirq_ctx = 0; - - timer = list_entry(cpu_base->cb_pending.next, - struct hrtimer, cb_entry); - - debug_hrtimer_deactivate(timer); - timer_stats_account_hrtimer(timer); - - fn = timer->function; - /* - * A timer might have been added to the cb_pending list - * when it was migrated during a cpu-offline operation. - * Emulate hardirq context for such timers. - */ - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || - timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) - emulate_hardirq_ctx = 1; - - __remove_hrtimer(timer, timer->base, HRTIMER_STATE_CALLBACK, 0); - spin_unlock_irq(&cpu_base->lock); - - if (unlikely(emulate_hardirq_ctx)) { - local_irq_disable(); - restart = fn(timer); - local_irq_enable(); - } else - restart = fn(timer); - - spin_lock_irq(&cpu_base->lock); - - timer->state &= ~HRTIMER_STATE_CALLBACK; - if (restart == HRTIMER_RESTART) { - BUG_ON(hrtimer_active(timer)); - /* - * Enqueue the timer, allow reprogramming of the event - * device - */ - enqueue_hrtimer(timer, timer->base, 1); - } else if (hrtimer_active(timer)) { - /* - * If the timer was rearmed on another CPU, reprogram - * the event device. - */ - struct hrtimer_clock_base *base = timer->base; - - if (base->first == &timer->node && - hrtimer_reprogram(timer, base)) { - /* - * Timer is expired. Thus move it from tree to - * pending list again. - */ - __remove_hrtimer(timer, base, - HRTIMER_STATE_PENDING, 0); - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - } - } - } - spin_unlock_irq(&cpu_base->lock); -} - static void __run_hrtimer(struct hrtimer *timer) { struct hrtimer_clock_base *base = timer->base; @@ -1268,25 +1141,21 @@ static void __run_hrtimer(struct hrtimer *timer) enum hrtimer_restart (*fn)(struct hrtimer *); int restart; + WARN_ON(!irqs_disabled()); + debug_hrtimer_deactivate(timer); __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0); timer_stats_account_hrtimer(timer); - fn = timer->function; - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || - timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) { - /* - * Used for scheduler timers, avoid lock inversion with - * rq->lock and tasklist_lock. - * - * These timers are required to deal with enqueue expiry - * themselves and are not allowed to migrate. - */ - spin_unlock(&cpu_base->lock); - restart = fn(timer); - spin_lock(&cpu_base->lock); - } else - restart = fn(timer); + + /* + * Because we run timers from hardirq context, there is no chance + * they get migrated to another cpu, therefore its safe to unlock + * the timer base. + */ + spin_unlock(&cpu_base->lock); + restart = fn(timer); + spin_lock(&cpu_base->lock); /* * Note: We clear the CALLBACK bit after enqueue_hrtimer to avoid @@ -1311,7 +1180,7 @@ void hrtimer_interrupt(struct clock_event_device *dev) struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); struct hrtimer_clock_base *base; ktime_t expires_next, now; - int i, raise = 0; + int i; BUG_ON(!cpu_base->hres_active); cpu_base->nr_events++; @@ -1360,16 +1229,6 @@ void hrtimer_interrupt(struct clock_event_device *dev) break; } - /* Move softirq callbacks to the pending list */ - if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) { - __remove_hrtimer(timer, base, - HRTIMER_STATE_PENDING, 0); - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - raise = 1; - continue; - } - __run_hrtimer(timer); } spin_unlock(&cpu_base->lock); @@ -1383,10 +1242,6 @@ void hrtimer_interrupt(struct clock_event_device *dev) if (tick_program_event(expires_next, 0)) goto retry; } - - /* Raise softirq ? */ - if (raise) - raise_softirq(HRTIMER_SOFTIRQ); } /** @@ -1413,11 +1268,6 @@ void hrtimer_peek_ahead_timers(void) local_irq_restore(flags); } -static void run_hrtimer_softirq(struct softirq_action *h) -{ - run_hrtimer_pending(&__get_cpu_var(hrtimer_bases)); -} - #endif /* CONFIG_HIGH_RES_TIMERS */ /* @@ -1429,8 +1279,6 @@ static void run_hrtimer_softirq(struct softirq_action *h) */ void hrtimer_run_pending(void) { - struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); - if (hrtimer_hres_active()) return; @@ -1444,8 +1292,6 @@ void hrtimer_run_pending(void) */ if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) hrtimer_switch_to_hres(); - - run_hrtimer_pending(cpu_base); } /* @@ -1482,14 +1328,6 @@ void hrtimer_run_queues(void) hrtimer_get_expires_tv64(timer)) break; - if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) { - __remove_hrtimer(timer, base, - HRTIMER_STATE_PENDING, 0); - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - continue; - } - __run_hrtimer(timer); } spin_unlock(&cpu_base->lock); @@ -1516,9 +1354,6 @@ void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task) { sl->timer.function = hrtimer_wakeup; sl->task = task; -#ifdef CONFIG_HIGH_RES_TIMERS - sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; -#endif } static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode) @@ -1655,36 +1490,22 @@ static void __cpuinit init_hrtimers_cpu(int cpu) for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) cpu_base->clock_base[i].cpu_base = cpu_base; - INIT_LIST_HEAD(&cpu_base->cb_pending); hrtimer_init_hres(cpu_base); } #ifdef CONFIG_HOTPLUG_CPU -static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, - struct hrtimer_clock_base *new_base, int dcpu) +static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, + struct hrtimer_clock_base *new_base) { struct hrtimer *timer; struct rb_node *node; - int raise = 0; while ((node = rb_first(&old_base->active))) { timer = rb_entry(node, struct hrtimer, node); BUG_ON(hrtimer_callback_running(timer)); debug_hrtimer_deactivate(timer); - /* - * Should not happen. Per CPU timers should be - * canceled _before_ the migration code is called - */ - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) { - __remove_hrtimer(timer, old_base, - HRTIMER_STATE_INACTIVE, 0); - WARN(1, "hrtimer (%p %p)active but cpu %d dead\n", - timer, timer->function, dcpu); - continue; - } - /* * Mark it as STATE_MIGRATE not INACTIVE otherwise the * timer could be seen as !active and just vanish away @@ -1693,69 +1514,34 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0); timer->base = new_base; /* - * Enqueue the timer. Allow reprogramming of the event device + * Enqueue the timers on the new cpu, but do not reprogram + * the timer as that would enable a deadlock between + * hrtimer_enqueue_reprogramm() running the timer and us still + * holding a nested base lock. + * + * Instead we tickle the hrtimer interrupt after the migration + * is done, which will run all expired timers and re-programm + * the timer device. */ - enqueue_hrtimer(timer, new_base, 1); + enqueue_hrtimer(timer, new_base, 0); -#ifdef CONFIG_HIGH_RES_TIMERS - /* - * Happens with high res enabled when the timer was - * already expired and the callback mode is - * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The - * enqueue code does not move them to the soft irq - * pending list for performance/latency reasons, but - * in the migration state, we need to do that - * otherwise we end up with a stale timer. - */ - if (timer->state == HRTIMER_STATE_MIGRATE) { - timer->state = HRTIMER_STATE_PENDING; - list_add_tail(&timer->cb_entry, - &new_base->cpu_base->cb_pending); - raise = 1; - } -#endif /* Clear the migration state bit */ timer->state &= ~HRTIMER_STATE_MIGRATE; } - return raise; } -#ifdef CONFIG_HIGH_RES_TIMERS -static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, - struct hrtimer_cpu_base *new_base) -{ - struct hrtimer *timer; - int raise = 0; - - while (!list_empty(&old_base->cb_pending)) { - timer = list_entry(old_base->cb_pending.next, - struct hrtimer, cb_entry); - - __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0); - timer->base = &new_base->clock_base[timer->base->index]; - list_add_tail(&timer->cb_entry, &new_base->cb_pending); - raise = 1; - } - return raise; -} -#else -static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, - struct hrtimer_cpu_base *new_base) -{ - return 0; -} -#endif - -static void migrate_hrtimers(int cpu) +static int migrate_hrtimers(int scpu) { struct hrtimer_cpu_base *old_base, *new_base; - int i, raise = 0; + int dcpu, i; - BUG_ON(cpu_online(cpu)); - old_base = &per_cpu(hrtimer_bases, cpu); + BUG_ON(cpu_online(scpu)); + old_base = &per_cpu(hrtimer_bases, scpu); new_base = &get_cpu_var(hrtimer_bases); - tick_cancel_sched_timer(cpu); + dcpu = smp_processor_id(); + + tick_cancel_sched_timer(scpu); /* * The caller is globally serialized and nobody else * takes two locks at once, deadlock is not possible. @@ -1764,41 +1550,47 @@ static void migrate_hrtimers(int cpu) spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { - if (migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i], cpu)) - raise = 1; + migrate_hrtimer_list(&old_base->clock_base[i], + &new_base->clock_base[i]); } - if (migrate_hrtimer_pending(old_base, new_base)) - raise = 1; - spin_unlock(&old_base->lock); spin_unlock_irq(&new_base->lock); put_cpu_var(hrtimer_bases); - if (raise) - hrtimer_raise_softirq(); + return dcpu; } + +static void tickle_timers(void *arg) +{ + hrtimer_peek_ahead_timers(); +} + #endif /* CONFIG_HOTPLUG_CPU */ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { - unsigned int cpu = (long)hcpu; + int scpu = (long)hcpu; switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - init_hrtimers_cpu(cpu); + init_hrtimers_cpu(scpu); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: case CPU_DEAD_FROZEN: - clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &cpu); - migrate_hrtimers(cpu); + { + int dcpu; + + clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu); + dcpu = migrate_hrtimers(scpu); + smp_call_function_single(dcpu, tickle_timers, NULL, 0); break; + } #endif default: @@ -1817,9 +1609,6 @@ void __init hrtimers_init(void) hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE, (void *)(long)smp_processor_id()); register_cpu_notifier(&hrtimers_nb); -#ifdef CONFIG_HIGH_RES_TIMERS - open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq); -#endif } /** diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index a140e44eebba..887c63787de6 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -116,7 +116,7 @@ static DEFINE_SPINLOCK(idr_lock); * must supply functions here, even if the function just returns * ENOSYS. The standard POSIX timer management code assumes the * following: 1.) The k_itimer struct (sched.h) is used for the - * timer. 2.) The list, it_lock, it_clock, it_id and it_process + * timer. 2.) The list, it_lock, it_clock, it_id and it_pid * fields are not modified by timer code. * * At this time all functions EXCEPT clock_nanosleep can be @@ -319,7 +319,8 @@ void do_schedule_next_timer(struct siginfo *info) int posix_timer_event(struct k_itimer *timr, int si_private) { - int shared, ret; + struct task_struct *task; + int shared, ret = -1; /* * FIXME: if ->sigq is queued we can race with * dequeue_signal()->do_schedule_next_timer(). @@ -333,8 +334,13 @@ int posix_timer_event(struct k_itimer *timr, int si_private) */ timr->sigq->info.si_sys_private = si_private; - shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID); - ret = send_sigqueue(timr->sigq, timr->it_process, shared); + rcu_read_lock(); + task = pid_task(timr->it_pid, PIDTYPE_PID); + if (task) { + shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID); + ret = send_sigqueue(timr->sigq, task, shared); + } + rcu_read_unlock(); /* If we failed to send the signal the timer stops. */ return ret > 0; } @@ -411,7 +417,7 @@ static enum hrtimer_restart posix_timer_fn(struct hrtimer *timer) return ret; } -static struct task_struct * good_sigevent(sigevent_t * event) +static struct pid *good_sigevent(sigevent_t * event) { struct task_struct *rtn = current->group_leader; @@ -425,7 +431,7 @@ static struct task_struct * good_sigevent(sigevent_t * event) ((event->sigev_signo <= 0) || (event->sigev_signo > SIGRTMAX))) return NULL; - return rtn; + return task_pid(rtn); } void register_posix_clock(const clockid_t clock_id, struct k_clock *new_clock) @@ -464,6 +470,7 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set) idr_remove(&posix_timers_id, tmr->it_id); spin_unlock_irqrestore(&idr_lock, flags); } + put_pid(tmr->it_pid); sigqueue_free(tmr->sigq); kmem_cache_free(posix_timers_cache, tmr); } @@ -477,7 +484,6 @@ sys_timer_create(const clockid_t which_clock, { struct k_itimer *new_timer; int error, new_timer_id; - struct task_struct *process; sigevent_t event; int it_id_set = IT_ID_NOT_SET; @@ -531,11 +537,9 @@ sys_timer_create(const clockid_t which_clock, goto out; } rcu_read_lock(); - process = good_sigevent(&event); - if (process) - get_task_struct(process); + new_timer->it_pid = get_pid(good_sigevent(&event)); rcu_read_unlock(); - if (!process) { + if (!new_timer->it_pid) { error = -EINVAL; goto out; } @@ -543,8 +547,7 @@ sys_timer_create(const clockid_t which_clock, event.sigev_notify = SIGEV_SIGNAL; event.sigev_signo = SIGALRM; event.sigev_value.sival_int = new_timer->it_id; - process = current->group_leader; - get_task_struct(process); + new_timer->it_pid = get_pid(task_tgid(current)); } new_timer->it_sigev_notify = event.sigev_notify; @@ -554,7 +557,7 @@ sys_timer_create(const clockid_t which_clock, new_timer->sigq->info.si_code = SI_TIMER; spin_lock_irq(¤t->sighand->siglock); - new_timer->it_process = process; + new_timer->it_signal = current->signal; list_add(&new_timer->list, ¤t->signal->posix_timers); spin_unlock_irq(¤t->sighand->siglock); @@ -589,8 +592,7 @@ static struct k_itimer *lock_timer(timer_t timer_id, unsigned long *flags) timr = idr_find(&posix_timers_id, (int)timer_id); if (timr) { spin_lock(&timr->it_lock); - if (timr->it_process && - same_thread_group(timr->it_process, current)) { + if (timr->it_signal == current->signal) { spin_unlock(&idr_lock); return timr; } @@ -837,8 +839,7 @@ retry_delete: * This keeps any tasks waiting on the spin lock from thinking * they got something (see the lock code above). */ - put_task_struct(timer->it_process); - timer->it_process = NULL; + timer->it_signal = NULL; unlock_timer(timer, flags); release_posix_timer(timer, IT_ID_SET); @@ -864,8 +865,7 @@ retry_delete: * This keeps any tasks waiting on the spin lock from thinking * they got something (see the lock code above). */ - put_task_struct(timer->it_process); - timer->it_process = NULL; + timer->it_signal = NULL; unlock_timer(timer, flags); release_posix_timer(timer, IT_ID_SET); diff --git a/kernel/sched.c b/kernel/sched.c index 22aa9cab3fe5..fff1c4a20b65 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -209,7 +209,6 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime) hrtimer_init(&rt_b->rt_period_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rt_b->rt_period_timer.function = sched_rt_period_timer; - rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; } static inline int rt_bandwidth_enabled(void) @@ -1139,7 +1138,6 @@ static void init_rq_hrtick(struct rq *rq) hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rq->hrtick_timer.function = hrtick; - rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; } #else /* CONFIG_SCHED_HRTICK */ static inline void hrtick_clear(struct rq *rq) diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 8ff15e5d486b..f5f793d92415 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -131,7 +131,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer) { enum hrtimer_restart res = HRTIMER_NORESTART; - write_seqlock_irq(&xtime_lock); + write_seqlock(&xtime_lock); switch (time_state) { case TIME_OK: @@ -164,7 +164,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer) } update_vsyscall(&xtime, clock); - write_sequnlock_irq(&xtime_lock); + write_sequnlock(&xtime_lock); return res; } diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 342fc9ccab46..8f3fc2582d38 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -247,7 +247,7 @@ void tick_nohz_stop_sched_tick(int inidle) if (need_resched()) goto end; - if (unlikely(local_softirq_pending())) { + if (unlikely(local_softirq_pending() && cpu_online(cpu))) { static int ratelimit; if (ratelimit < 10) { @@ -282,8 +282,31 @@ void tick_nohz_stop_sched_tick(int inidle) /* Schedule the tick, if we are at least one jiffie off */ if ((long)delta_jiffies >= 1) { + /* + * calculate the expiry time for the next timer wheel + * timer + */ + expires = ktime_add_ns(last_update, tick_period.tv64 * + delta_jiffies); + + /* + * If this cpu is the one which updates jiffies, then + * give up the assignment and let it be taken by the + * cpu which runs the tick timer next, which might be + * this cpu as well. If we don't drop this here the + * jiffies might be stale and do_timer() never + * invoked. + */ + if (cpu == tick_do_timer_cpu) + tick_do_timer_cpu = TICK_DO_TIMER_NONE; + if (delta_jiffies > 1) cpu_set(cpu, nohz_cpu_mask); + + /* Skip reprogram of event if its not changed */ + if (ts->tick_stopped && ktime_equal(expires, dev->next_event)) + goto out; + /* * nohz_stop_sched_tick can be called several times before * the nohz_restart_sched_tick is called. This happens when @@ -306,17 +329,6 @@ void tick_nohz_stop_sched_tick(int inidle) rcu_enter_nohz(); } - /* - * If this cpu is the one which updates jiffies, then - * give up the assignment and let it be taken by the - * cpu which runs the tick timer next, which might be - * this cpu as well. If we don't drop this here the - * jiffies might be stale and do_timer() never - * invoked. - */ - if (cpu == tick_do_timer_cpu) - tick_do_timer_cpu = TICK_DO_TIMER_NONE; - ts->idle_sleeps++; /* @@ -332,12 +344,7 @@ void tick_nohz_stop_sched_tick(int inidle) goto out; } - /* - * calculate the expiry time for the next timer wheel - * timer - */ - expires = ktime_add_ns(last_update, tick_period.tv64 * - delta_jiffies); + /* Mark expiries */ ts->idle_expires = expires; if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { @@ -681,7 +688,6 @@ void tick_setup_sched_timer(void) */ hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); ts->sched_timer.function = tick_sched_timer; - ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; /* Get the next period (per cpu) */ hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update()); diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 01becf1f19ff..a5779bd975db 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -202,7 +202,6 @@ static void start_stack_timer(int cpu) hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer->function = stack_trace_timer_fn; - hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL); } diff --git a/sound/core/hrtimer.c b/sound/core/hrtimer.c index c1d285921f80..34c7d48f5061 100644 --- a/sound/core/hrtimer.c +++ b/sound/core/hrtimer.c @@ -57,7 +57,6 @@ static int snd_hrtimer_open(struct snd_timer *t) return -ENOMEM; hrtimer_init(&stime->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL); stime->timer = t; - stime->hrt.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; stime->hrt.function = snd_hrtimer_callback; t->private_data = stime; return 0; diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c index 2a02f704f366..a4049eb94d35 100644 --- a/sound/drivers/pcsp/pcsp.c +++ b/sound/drivers/pcsp/pcsp.c @@ -96,7 +96,6 @@ static int __devinit snd_card_pcsp_probe(int devnum, struct device *dev) return -EINVAL; hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - pcsp_chip.timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; pcsp_chip.timer.function = pcsp_do_timer; card = snd_card_new(index, id, THIS_MODULE, 0);