pinctrl: sx150x: sort chips by part number

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Peter Rosin 2016-11-24 21:45:19 +01:00 committed by Linus Walleij
parent 1663682cf0
commit bba709bd7a
2 changed files with 74 additions and 74 deletions

View file

@ -6,11 +6,11 @@ pin controller, GPIO, and interrupt bindings.
Required properties:
- compatible: should be one of :
"semtech,sx1502q",
"semtech,sx1503q",
"semtech,sx1506q",
"semtech,sx1508q",
"semtech,sx1509q",
"semtech,sx1502q",
"semtech,sx1503q".
"semtech,sx1509q".
- reg: The I2C slave address for this device.

View file

@ -148,71 +148,6 @@ static const struct pinctrl_pin_desc sx150x_16_pins[] = {
PINCTRL_PIN(16, "oscio"),
};
static const struct sx150x_device_data sx1508q_device_data = {
.model = SX150X_789,
.reg_pullup = 0x03,
.reg_pulldn = 0x04,
.reg_dir = 0x07,
.reg_data = 0x08,
.reg_irq_mask = 0x09,
.reg_irq_src = 0x0c,
.reg_sense = 0x0a,
.pri.x789 = {
.reg_drain = 0x05,
.reg_polarity = 0x06,
.reg_clock = 0x0f,
.reg_misc = 0x10,
.reg_reset = 0x7d,
},
.ngpios = 8,
.pins = sx150x_8_pins,
.npins = ARRAY_SIZE(sx150x_8_pins),
};
static const struct sx150x_device_data sx1509q_device_data = {
.model = SX150X_789,
.reg_pullup = 0x06,
.reg_pulldn = 0x08,
.reg_dir = 0x0e,
.reg_data = 0x10,
.reg_irq_mask = 0x12,
.reg_irq_src = 0x18,
.reg_sense = 0x14,
.pri.x789 = {
.reg_drain = 0x0a,
.reg_polarity = 0x0c,
.reg_clock = 0x1e,
.reg_misc = 0x1f,
.reg_reset = 0x7d,
},
.ngpios = 16,
.pins = sx150x_16_pins,
.npins = ARRAY_SIZE(sx150x_16_pins),
};
static const struct sx150x_device_data sx1506q_device_data = {
.model = SX150X_456,
.reg_pullup = 0x04,
.reg_pulldn = 0x06,
.reg_dir = 0x02,
.reg_data = 0x00,
.reg_irq_mask = 0x08,
.reg_irq_src = 0x0e,
.reg_sense = 0x0a,
.pri.x456 = {
.reg_pld_mode = 0x20,
.reg_pld_table0 = 0x22,
.reg_pld_table1 = 0x24,
.reg_pld_table2 = 0x26,
.reg_pld_table3 = 0x28,
.reg_pld_table4 = 0x2a,
.reg_advance = 0xad,
},
.ngpios = 16,
.pins = sx150x_16_pins,
.npins = 16, /* oscio not available */
};
static const struct sx150x_device_data sx1502q_device_data = {
.model = SX150X_123,
.reg_pullup = 0x02,
@ -259,6 +194,71 @@ static const struct sx150x_device_data sx1503q_device_data = {
.npins = 16, /* oscio not available */
};
static const struct sx150x_device_data sx1506q_device_data = {
.model = SX150X_456,
.reg_pullup = 0x04,
.reg_pulldn = 0x06,
.reg_dir = 0x02,
.reg_data = 0x00,
.reg_irq_mask = 0x08,
.reg_irq_src = 0x0e,
.reg_sense = 0x0a,
.pri.x456 = {
.reg_pld_mode = 0x20,
.reg_pld_table0 = 0x22,
.reg_pld_table1 = 0x24,
.reg_pld_table2 = 0x26,
.reg_pld_table3 = 0x28,
.reg_pld_table4 = 0x2a,
.reg_advance = 0xad,
},
.ngpios = 16,
.pins = sx150x_16_pins,
.npins = 16, /* oscio not available */
};
static const struct sx150x_device_data sx1508q_device_data = {
.model = SX150X_789,
.reg_pullup = 0x03,
.reg_pulldn = 0x04,
.reg_dir = 0x07,
.reg_data = 0x08,
.reg_irq_mask = 0x09,
.reg_irq_src = 0x0c,
.reg_sense = 0x0a,
.pri.x789 = {
.reg_drain = 0x05,
.reg_polarity = 0x06,
.reg_clock = 0x0f,
.reg_misc = 0x10,
.reg_reset = 0x7d,
},
.ngpios = 8,
.pins = sx150x_8_pins,
.npins = ARRAY_SIZE(sx150x_8_pins),
};
static const struct sx150x_device_data sx1509q_device_data = {
.model = SX150X_789,
.reg_pullup = 0x06,
.reg_pulldn = 0x08,
.reg_dir = 0x0e,
.reg_data = 0x10,
.reg_irq_mask = 0x12,
.reg_irq_src = 0x18,
.reg_sense = 0x14,
.pri.x789 = {
.reg_drain = 0x0a,
.reg_polarity = 0x0c,
.reg_clock = 0x1e,
.reg_misc = 0x1f,
.reg_reset = 0x7d,
},
.ngpios = 16,
.pins = sx150x_16_pins,
.npins = ARRAY_SIZE(sx150x_16_pins),
};
static int sx150x_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
return 0;
@ -758,20 +758,20 @@ static const struct pinconf_ops sx150x_pinconf_ops = {
};
static const struct i2c_device_id sx150x_id[] = {
{"sx1508q", (kernel_ulong_t) &sx1508q_device_data },
{"sx1509q", (kernel_ulong_t) &sx1509q_device_data },
{"sx1506q", (kernel_ulong_t) &sx1506q_device_data },
{"sx1502q", (kernel_ulong_t) &sx1502q_device_data },
{"sx1503q", (kernel_ulong_t) &sx1503q_device_data },
{"sx1506q", (kernel_ulong_t) &sx1506q_device_data },
{"sx1508q", (kernel_ulong_t) &sx1508q_device_data },
{"sx1509q", (kernel_ulong_t) &sx1509q_device_data },
{}
};
static const struct of_device_id sx150x_of_match[] = {
{ .compatible = "semtech,sx1508q", .data = &sx1508q_device_data },
{ .compatible = "semtech,sx1509q", .data = &sx1509q_device_data },
{ .compatible = "semtech,sx1506q", .data = &sx1506q_device_data },
{ .compatible = "semtech,sx1502q", .data = &sx1502q_device_data },
{ .compatible = "semtech,sx1503q", .data = &sx1503q_device_data },
{ .compatible = "semtech,sx1506q", .data = &sx1506q_device_data },
{ .compatible = "semtech,sx1508q", .data = &sx1508q_device_data },
{ .compatible = "semtech,sx1509q", .data = &sx1509q_device_data },
{},
};