diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index 1e8a8578148f..6dbdeb3c361a 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -9,7 +9,7 @@ Required SoC Specific Properties: - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms - samsung,s3c6410-spi: for s3c6410 platforms - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms - - samsung,exynos4210-spi: for exynos4 and exynos5 platforms + - samsung,exynos7-spi: for exynos7 platforms - reg: physical base address of the controller and length of memory mapped region. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 84e7c9e6ccef..de2d33dea8b8 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -444,7 +444,7 @@ config SPI_S3C24XX_FIQ config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" - depends on PLAT_SAMSUNG + depends on (PLAT_SAMSUNG || ARCH_EXYNOS) select S3C64XX_PL080 if ARCH_S3C64XX help SPI driver for Samsung S3C64XX and newer SoCs. diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 480133ee1eb3..59e07cf31598 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -33,8 +33,9 @@ #include -#define MAX_SPI_PORTS 3 +#define MAX_SPI_PORTS 6 #define S3C64XX_SPI_QUIRK_POLL (1 << 0) +#define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) /* Registers and bit-fields */ @@ -78,6 +79,7 @@ #define S3C64XX_SPI_SLAVE_AUTO (1<<1) #define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) +#define S3C64XX_SPI_SLAVE_NSC_CNT_2 (2<<4) #define S3C64XX_SPI_INT_TRAILING_EN (1<<6) #define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) @@ -717,7 +719,12 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, enable_datapath(sdd, spi, xfer, use_dma); /* Start the signals */ - writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + else + writel(readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL) + | S3C64XX_SPI_SLAVE_AUTO | S3C64XX_SPI_SLAVE_NSC_CNT_2, + sdd->regs + S3C64XX_SPI_SLAVE_SEL); spin_unlock_irqrestore(&sdd->lock, flags); @@ -866,13 +873,15 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } pm_runtime_put(&sdd->pdev->dev); - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); return 0; setup_exit: pm_runtime_put(&sdd->pdev->dev); /* setup() returns with device de-selected */ - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); if (gpio_is_valid(spi->cs_gpio)) gpio_free(spi->cs_gpio); @@ -946,7 +955,8 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) sdd->cur_speed = 0; - writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN); @@ -1341,6 +1351,15 @@ static struct s3c64xx_spi_port_config exynos5440_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_POLL, }; +static struct s3c64xx_spi_port_config exynos7_spi_port_config = { + .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff}, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .high_speed = true, + .clk_from_cmu = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static struct platform_device_id s3c64xx_spi_driver_ids[] = { { .name = "s3c2443-spi", @@ -1374,6 +1393,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = { { .compatible = "samsung,exynos5440-spi", .data = (void *)&exynos5440_spi_port_config, }, + { .compatible = "samsung,exynos7-spi", + .data = (void *)&exynos7_spi_port_config, + }, { }, }; MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match);