From 1e6c9c2878c9c1f301449c78551e0b7c5f3e3ae5 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 10 Jan 2006 16:59:27 +0000 Subject: [PATCH 01/11] [ARM] 3242/2: AT91RM9200 support for 2.6 (Serial) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the Serial driver. This version uses the newly re-written GPL'ed hardware headers. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- drivers/serial/Kconfig | 34 + drivers/serial/Makefile | 1 + drivers/serial/at91_serial.c | 894 ++++++++++++++++++ .../asm-arm/arch-at91rm9200/at91rm9200_pdc.h | 36 + .../arch-at91rm9200/at91rm9200_usart.h | 123 +++ include/asm-arm/mach/serial_at91rm9200.h | 36 + include/linux/serial_core.h | 3 + 7 files changed, 1127 insertions(+) create mode 100644 drivers/serial/at91_serial.c create mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h create mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_usart.h create mode 100644 include/asm-arm/mach/serial_at91rm9200.h diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 1bae26a8a503..a256a020b15e 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -280,6 +280,40 @@ config SERIAL_AMBA_PL011_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) +config SERIAL_AT91 + bool "AT91RM9200 serial port support" + depends on ARM && ARCH_AT91RM9200 + select SERIAL_CORE + help + This enables the driver for the on-chip UARTs of the AT91RM9200 + processor. + +config SERIAL_AT91_CONSOLE + bool "Support for console on AT91RM9200 serial port" + depends on SERIAL_AT91=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a UART on the AT91RM9200 as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + +config SERIAL_AT91_TTYAT + bool "Install as device ttyAT0-4 instead of ttyS0-4" + depends on SERIAL_AT91=y + help + Say Y here if you wish to have the five internal AT91RM9200 UARTs + appear as /dev/ttyAT0-4 (major 240, minor 0-4) instead of the + normal /dev/ttyS0-4 (major 4, minor 64-68). This is necessary if + you also want other UARTs, such as external 8250/16C550 compatible + UARTs. + The ttySn nodes are legally reserved for the 8250 serial driver + but are often misused by other serial drivers. + + To use this, you should create suitable ttyATn device nodes in + /dev/, and pass "console=ttyATn" to the kernel. + + Say Y if you have an external 8250/16C550 UART. If unsure, say N. + config SERIAL_CLPS711X tristate "CLPS711X serial port support" depends on ARM && ARCH_CLPS711X diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 137148bba4fa..24a583e482bb 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -56,3 +56,4 @@ obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o +obj-$(CONFIG_SERIAL_AT91) += at91_serial.o diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c new file mode 100644 index 000000000000..0e206063d685 --- /dev/null +++ b/drivers/serial/at91_serial.c @@ -0,0 +1,894 @@ +/* + * linux/drivers/char/at91_serial.c + * + * Driver for Atmel AT91RM9200 Serial ports + * + * Copyright (C) 2003 Rick Bronson + * + * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + + +#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#ifdef CONFIG_SERIAL_AT91_TTYAT + +/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we + * should coexist with the 8250 driver, such as if we have an external 16C550 + * UART. */ +#define SERIAL_AT91_MAJOR 204 +#define MINOR_START 154 +#define AT91_DEVICENAME "ttyAT" + +#else + +/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port + * name, but it is legally reserved for the 8250 driver. */ +#define SERIAL_AT91_MAJOR TTY_MAJOR +#define MINOR_START 64 +#define AT91_DEVICENAME "ttyS" + +#endif + +#define AT91_VA_BASE_DBGU ((unsigned long) AT91_VA_BASE_SYS + AT91_DBGU) +#define AT91_ISR_PASS_LIMIT 256 + +#define UART_PUT_CR(port,v) writel(v, (port)->membase + AT91_US_CR) +#define UART_GET_MR(port) readl((port)->membase + AT91_US_MR) +#define UART_PUT_MR(port,v) writel(v, (port)->membase + AT91_US_MR) +#define UART_PUT_IER(port,v) writel(v, (port)->membase + AT91_US_IER) +#define UART_PUT_IDR(port,v) writel(v, (port)->membase + AT91_US_IDR) +#define UART_GET_IMR(port) readl((port)->membase + AT91_US_IMR) +#define UART_GET_CSR(port) readl((port)->membase + AT91_US_CSR) +#define UART_GET_CHAR(port) readl((port)->membase + AT91_US_RHR) +#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + AT91_US_THR) +#define UART_GET_BRGR(port) readl((port)->membase + AT91_US_BRGR) +#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + AT91_US_BRGR) +#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + AT91_US_RTOR) + +// #define UART_GET_CR(port) readl((port)->membase + AT91_US_CR) // is write-only + + /* PDC registers */ +#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + AT91_PDC_PTCR) +#define UART_PUT_RPR(port,v) writel(v, (port)->membase + AT91_PDC_RPR) +#define UART_PUT_RCR(port,v) writel(v, (port)->membase + AT91_PDC_RCR) +#define UART_GET_RCR(port) readl((port)->membase + AT91_PDC_RCR) +#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + AT91_PDC_RNPR) +#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + AT91_PDC_RNCR) + + +static int (*at91_open)(struct uart_port *); +static void (*at91_close)(struct uart_port *); + +#ifdef SUPPORT_SYSRQ +static struct console at91_console; +#endif + +/* + * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. + */ +static u_int at91_tx_empty(struct uart_port *port) +{ + return (UART_GET_CSR(port) & AT91_US_TXEMPTY) ? TIOCSER_TEMT : 0; +} + +/* + * Set state of the modem control output lines + */ +static void at91_set_mctrl(struct uart_port *port, u_int mctrl) +{ + unsigned int control = 0; + + /* + * Errata #39: RTS0 is not internally connected to PA21. We need to drive + * the pin manually. + */ + if (port->mapbase == AT91_VA_BASE_US0) { + if (mctrl & TIOCM_RTS) + at91_sys_write(AT91_PIOA + PIO_CODR, AT91_PA21_RTS0); + else + at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); + } + + if (mctrl & TIOCM_RTS) + control |= AT91_US_RTSEN; + else + control |= AT91_US_RTSDIS; + + if (mctrl & TIOCM_DTR) + control |= AT91_US_DTREN; + else + control |= AT91_US_DTRDIS; + + UART_PUT_CR(port,control); +} + +/* + * Get state of the modem control input lines + */ +static u_int at91_get_mctrl(struct uart_port *port) +{ + unsigned int status, ret = 0; + + status = UART_GET_CSR(port); + + /* + * The control signals are active low. + */ + if (!(status & AT91_US_DCD)) + ret |= TIOCM_CD; + if (!(status & AT91_US_CTS)) + ret |= TIOCM_CTS; + if (!(status & AT91_US_DSR)) + ret |= TIOCM_DSR; + if (!(status & AT91_US_RI)) + ret |= TIOCM_RI; + + return ret; +} + +/* + * Stop transmitting. + */ +static void at91_stop_tx(struct uart_port *port) +{ + UART_PUT_IDR(port, AT91_US_TXRDY); + port->read_status_mask &= ~AT91_US_TXRDY; +} + +/* + * Start transmitting. + */ +static void at91_start_tx(struct uart_port *port) +{ + port->read_status_mask |= AT91_US_TXRDY; + UART_PUT_IER(port, AT91_US_TXRDY); +} + +/* + * Stop receiving - port is in process of being closed. + */ +static void at91_stop_rx(struct uart_port *port) +{ + UART_PUT_IDR(port, AT91_US_RXRDY); +} + +/* + * Enable modem status interrupts + */ +static void at91_enable_ms(struct uart_port *port) +{ + port->read_status_mask |= (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC); + UART_PUT_IER(port, AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC); +} + +/* + * Control the transmission of a break signal + */ +static void at91_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state != 0) + UART_PUT_CR(port, AT91_US_STTBRK); /* start break */ + else + UART_PUT_CR(port, AT91_US_STPBRK); /* stop break */ +} + +/* + * Characters received (called from interrupt handler) + */ +static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs) +{ + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, flg; + + status = UART_GET_CSR(port) & port->read_status_mask; + while (status & (AT91_US_RXRDY)) { + ch = UART_GET_CHAR(port); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto ignore_char; + port->icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE))) { + UART_PUT_CR(port, AT91_US_RSTSTA); /* clear error */ + if (status & (AT91_US_PARE)) + port->icount.parity++; + if (status & (AT91_US_FRAME)) + port->icount.frame++; + if (status & (AT91_US_OVRE)) + port->icount.overrun++; + + if (status & AT91_US_PARE) + flg = TTY_PARITY; + else if (status & AT91_US_FRAME) + flg = TTY_FRAME; + if (status & AT91_US_OVRE) { + /* + * overrun does *not* affect the character + * we read from the FIFO + */ + tty_insert_flip_char(tty, ch, flg); + ch = 0; + flg = TTY_OVERRUN; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(port, ch, regs)) + goto ignore_char; + + tty_insert_flip_char(tty, ch, flg); + + ignore_char: + status = UART_GET_CSR(port) & port->read_status_mask; + } + + tty_flip_buffer_push(tty); +} + +/* + * Transmit characters (called from interrupt handler) + */ +static void at91_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + if (port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + at91_stop_tx(port); + return; + } + + while (UART_GET_CSR(port) & AT91_US_TXRDY) { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + at91_stop_tx(port); +} + +/* + * Interrupt handler + */ +static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + unsigned int status, pending, pass_counter = 0; + + status = UART_GET_CSR(port); + pending = status & port->read_status_mask; + if (pending) { + do { + if (pending & AT91_US_RXRDY) + at91_rx_chars(port, regs); + + /* Clear the relevent break bits */ + if (pending & AT91_US_RXBRK) { + UART_PUT_CR(port, AT91_US_RSTSTA); + port->icount.brk++; + uart_handle_break(port); + } + + // TODO: All reads to CSR will clear these interrupts! + if (pending & AT91_US_RIIC) port->icount.rng++; + if (pending & AT91_US_DSRIC) port->icount.dsr++; + if (pending & AT91_US_DCDIC) + uart_handle_dcd_change(port, !(status & AT91_US_DCD)); + if (pending & AT91_US_CTSIC) + uart_handle_cts_change(port, !(status & AT91_US_CTS)); + if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC)) + wake_up_interruptible(&port->info->delta_msr_wait); + + if (pending & AT91_US_TXRDY) + at91_tx_chars(port); + if (pass_counter++ > AT91_ISR_PASS_LIMIT) + break; + + status = UART_GET_CSR(port); + pending = status & port->read_status_mask; + } while (pending); + } + return IRQ_HANDLED; +} + +/* + * Perform initialization and enable port for reception + */ +static int at91_startup(struct uart_port *port) +{ + int retval; + + /* + * Ensure that no interrupts are enabled otherwise when + * request_irq() is called we could get stuck trying to + * handle an unexpected interrupt + */ + UART_PUT_IDR(port, -1); + + /* + * Allocate the IRQ + */ + retval = request_irq(port->irq, at91_interrupt, SA_SHIRQ, "at91_serial", port); + if (retval) { + printk("at91_serial: at91_startup - Can't get irq\n"); + return retval; + } + + /* + * If there is a specific "open" function (to register + * control line interrupts) + */ + if (at91_open) { + retval = at91_open(port); + if (retval) { + free_irq(port->irq, port); + return retval; + } + } + + port->read_status_mask = AT91_US_RXRDY | AT91_US_TXRDY | AT91_US_OVRE + | AT91_US_FRAME | AT91_US_PARE | AT91_US_RXBRK; + /* + * Finally, enable the serial port + */ + UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); + UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* enable xmit & rcvr */ + UART_PUT_IER(port, AT91_US_RXRDY); /* do receive only */ + return 0; +} + +/* + * Disable the port + */ +static void at91_shutdown(struct uart_port *port) +{ + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_CR(port, AT91_US_RSTSTA); + UART_PUT_IDR(port, -1); + + /* + * Free the interrupt + */ + free_irq(port->irq, port); + + /* + * If there is a specific "close" function (to unregister + * control line interrupts) + */ + if (at91_close) + at91_close(port); +} + +/* + * Power / Clock management. + */ +static void at91_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) +{ + switch (state) { + case 0: + /* + * Enable the peripheral clock for this serial port. + * This is called on uart_open() or a resume event. + */ + at91_sys_write(AT91_PMC_PCER, 1 << port->irq); + break; + case 3: + /* + * Disable the peripheral clock for this serial port. + * This is called on uart_close() or a suspend event. + */ + if (port->irq != AT91_ID_SYS) /* is this a shared clock? */ + at91_sys_write(AT91_PMC_PCDR, 1 << port->irq); + break; + default: + printk(KERN_ERR "at91_serial: unknown pm %d\n", state); + } +} + +/* + * Change the port parameters + */ +static void at91_set_termios(struct uart_port *port, struct termios * termios, struct termios * old) +{ + unsigned long flags; + unsigned int mode, imr, quot, baud; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + /* Get current mode register */ + mode = UART_GET_MR(port) & ~(AT91_US_CHRL | AT91_US_NBSTOP | AT91_US_PAR); + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + mode |= AT91_US_CHRL_5; + break; + case CS6: + mode |= AT91_US_CHRL_6; + break; + case CS7: + mode |= AT91_US_CHRL_7; + break; + default: + mode |= AT91_US_CHRL_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + mode |= AT91_US_NBSTOP_2; + + /* parity */ + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ + if (termios->c_cflag & PARODD) + mode |= AT91_US_PAR_MARK; + else + mode |= AT91_US_PAR_SPACE; + } + else if (termios->c_cflag & PARODD) + mode |= AT91_US_PAR_ODD; + else + mode |= AT91_US_PAR_EVEN; + } + else + mode |= AT91_US_PAR_NONE; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask |= AT91_US_OVRE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= AT91_US_FRAME | AT91_US_PARE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= AT91_US_RXBRK; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= (AT91_US_FRAME | AT91_US_PARE); + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= AT91_US_RXBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= AT91_US_OVRE; + } + + // TODO: Ignore all characters if CREAD is set. + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* disable interrupts and drain transmitter */ + imr = UART_GET_IMR(port); /* get interrupt mask */ + UART_PUT_IDR(port, -1); /* disable all interrupts */ + while (!(UART_GET_CSR(port) & AT91_US_TXEMPTY)) { barrier(); } + + /* disable receiver and transmitter */ + UART_PUT_CR(port, AT91_US_TXDIS | AT91_US_RXDIS); + + /* set the parity, stop bits and data size */ + UART_PUT_MR(port, mode); + + /* set the baud rate */ + UART_PUT_BRGR(port, quot); + UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); + UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); + + /* restore interrupts */ + UART_PUT_IER(port, imr); + + /* CTS flow-control and modem-status interrupts */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + port->ops->enable_ms(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return string describing the specified port + */ +static const char *at91_type(struct uart_port *port) +{ + return (port->type == PORT_AT91RM9200) ? "AT91_SERIAL" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void at91_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, + (port->mapbase == AT91_VA_BASE_DBGU) ? 512 : SZ_16K); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int at91_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, + (port->mapbase == AT91_VA_BASE_DBGU) ? 512 : SZ_16K, + "at91_serial") != NULL ? 0 : -EBUSY; + +} + +/* + * Configure/autoconfigure the port. + */ +static void at91_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AT91RM9200; + at91_request_port(port); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int at91_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91RM9200) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)port->mapbase != ser->iomem_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops at91_pops = { + .tx_empty = at91_tx_empty, + .set_mctrl = at91_set_mctrl, + .get_mctrl = at91_get_mctrl, + .stop_tx = at91_stop_tx, + .start_tx = at91_start_tx, + .stop_rx = at91_stop_rx, + .enable_ms = at91_enable_ms, + .break_ctl = at91_break_ctl, + .startup = at91_startup, + .shutdown = at91_shutdown, + .set_termios = at91_set_termios, + .type = at91_type, + .release_port = at91_release_port, + .request_port = at91_request_port, + .config_port = at91_config_port, + .verify_port = at91_verify_port, + .pm = at91_serial_pm, +}; + +static struct uart_port at91_ports[AT91_NR_UART]; + +void __init at91_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < AT91_NR_UART; i++) { + at91_ports[i].iotype = UPIO_MEM; + at91_ports[i].flags = UPF_BOOT_AUTOCONF; + at91_ports[i].uartclk = at91_master_clock; + at91_ports[i].ops = &at91_pops; + at91_ports[i].fifosize = 1; + at91_ports[i].line = i; + } +} + +void __init at91_register_uart_fns(struct at91rm9200_port_fns *fns) +{ + if (fns->enable_ms) + at91_pops.enable_ms = fns->enable_ms; + if (fns->get_mctrl) + at91_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + at91_pops.set_mctrl = fns->set_mctrl; + at91_open = fns->open; + at91_close = fns->close; + at91_pops.pm = fns->pm; + at91_pops.set_wake = fns->set_wake; +} + +/* + * Setup ports. + */ +void __init at91_register_uart(int idx, int port) +{ + if ((idx < 0) || (idx >= AT91_NR_UART)) { + printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx); + return; + } + + switch (port) { + case 0: + at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US0; + at91_ports[idx].mapbase = AT91_VA_BASE_US0; + at91_ports[idx].irq = AT91_ID_US0; + AT91_CfgPIO_USART0(); + break; + case 1: + at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US1; + at91_ports[idx].mapbase = AT91_VA_BASE_US1; + at91_ports[idx].irq = AT91_ID_US1; + AT91_CfgPIO_USART1(); + break; + case 2: + at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US2; + at91_ports[idx].mapbase = AT91_VA_BASE_US2; + at91_ports[idx].irq = AT91_ID_US2; + AT91_CfgPIO_USART2(); + break; + case 3: + at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US3; + at91_ports[idx].mapbase = AT91_VA_BASE_US3; + at91_ports[idx].irq = AT91_ID_US3; + AT91_CfgPIO_USART3(); + break; + case 4: + at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_DBGU; + at91_ports[idx].mapbase = AT91_VA_BASE_DBGU; + at91_ports[idx].irq = AT91_ID_SYS; + AT91_CfgPIO_DBGU(); + break; + default: + printk(KERN_ERR "%s : bad port number %d\n", __FUNCTION__, port); + } +} + +#ifdef CONFIG_SERIAL_AT91_CONSOLE + +/* + * Interrupts are disabled on entering + */ +static void at91_console_write(struct console *co, const char *s, u_int count) +{ + struct uart_port *port = at91_ports + co->index; + unsigned int status, i, imr; + + /* + * First, save IMR and then disable interrupts + */ + imr = UART_GET_IMR(port); /* get interrupt mask */ + UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + do { + status = UART_GET_CSR(port); + } while (!(status & AT91_US_TXRDY)); + UART_PUT_CHAR(port, s[i]); + if (s[i] == '\n') { + do { + status = UART_GET_CSR(port); + } while (!(status & AT91_US_TXRDY)); + UART_PUT_CHAR(port, '\r'); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore IMR + */ + do { + status = UART_GET_CSR(port); + } while (!(status & AT91_US_TXRDY)); + UART_PUT_IER(port, imr); /* set interrupts back the way they were */ +} + +/* + * If the port was already initialised (eg, by a boot loader), try to determine + * the current setup. + */ +static void __init at91_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) +{ + unsigned int mr, quot; + +// TODO: CR is a write-only register +// unsigned int cr; +// +// cr = UART_GET_CR(port) & (AT91_US_RXEN | AT91_US_TXEN); +// if (cr == (AT91_US_RXEN | AT91_US_TXEN)) { +// /* ok, the port was enabled */ +// } + + mr = UART_GET_MR(port) & AT91_US_CHRL; + if (mr == AT91_US_CHRL_8) + *bits = 8; + else + *bits = 7; + + mr = UART_GET_MR(port) & AT91_US_PAR; + if (mr == AT91_US_PAR_EVEN) + *parity = 'e'; + else if (mr == AT91_US_PAR_ODD) + *parity = 'o'; + + quot = UART_GET_BRGR(port); + *baud = port->uartclk / (16 * (quot)); +} + +static int __init at91_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + port = uart_get_console(at91_ports, AT91_NR_UART, co); + + /* + * Enable the serial console, in-case bootloader did not do it. + */ + at91_sys_write(AT91_PMC_PCER, 1 << port->irq); /* enable clock */ + UART_PUT_IDR(port, -1); /* disable interrupts */ + UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); + UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + at91_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver at91_uart; + +static struct console at91_console = { + .name = AT91_DEVICENAME, + .write = at91_console_write, + .device = uart_console_device, + .setup = at91_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &at91_uart, +}; + +#define AT91_CONSOLE_DEVICE &at91_console + +static int __init at91_console_init(void) +{ + at91_init_ports(); + + at91_console.index = at91_console_port; + register_console(&at91_console); + return 0; +} +console_initcall(at91_console_init); + +#else +#define AT91_CONSOLE_DEVICE NULL +#endif + +static struct uart_driver at91_uart = { + .owner = THIS_MODULE, + .driver_name = AT91_DEVICENAME, + .dev_name = AT91_DEVICENAME, + .devfs_name = AT91_DEVICENAME, + .major = SERIAL_AT91_MAJOR, + .minor = MINOR_START, + .nr = AT91_NR_UART, + .cons = AT91_CONSOLE_DEVICE, +}; + +static int __init at91_serial_init(void) +{ + int ret, i; + + at91_init_ports(); + + ret = uart_register_driver(&at91_uart); + if (ret) + return ret; + + for (i = 0; i < AT91_NR_UART; i++) { + if (at91_serial_map[i] >= 0) + uart_add_one_port(&at91_uart, &at91_ports[i]); + } + + return 0; +} + +static void __exit at91_serial_exit(void) +{ + int i; + + for (i = 0; i < AT91_NR_UART; i++) { + if (at91_serial_map[i] >= 0) + uart_remove_one_port(&at91_uart, &at91_ports[i]); + } + + uart_unregister_driver(&at91_uart); +} + +module_init(at91_serial_init); +module_exit(at91_serial_exit); + +MODULE_AUTHOR("Rick Bronson"); +MODULE_DESCRIPTION("AT91 generic serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h new file mode 100644 index 000000000000..ce1150d4438d --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h @@ -0,0 +1,36 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_pdc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Peripheral Data Controller (PDC) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_PDC_H +#define AT91RM9200_PDC_H + +#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */ +#define AT91_PDC_RCR 0x104 /* Receive Counter Register */ +#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */ +#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */ +#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */ +#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */ +#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */ +#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */ + +#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */ +#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */ +#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */ +#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */ +#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */ + +#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */ + +#endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h b/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h new file mode 100644 index 000000000000..79f851e31b9c --- /dev/null +++ b/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h @@ -0,0 +1,123 @@ +/* + * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * USART registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_USART_H +#define AT91RM9200_USART_H + +#define AT91_US_CR 0x00 /* Control Register */ +#define AT91_US_RSTRX (1 << 2) /* Reset Receiver */ +#define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */ +#define AT91_US_RXEN (1 << 4) /* Receiver Enable */ +#define AT91_US_RXDIS (1 << 5) /* Receiver Disable */ +#define AT91_US_TXEN (1 << 6) /* Transmitter Enable */ +#define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */ +#define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */ +#define AT91_US_STTBRK (1 << 9) /* Start Break */ +#define AT91_US_STPBRK (1 << 10) /* Stop Break */ +#define AT91_US_STTTO (1 << 11) /* Start Time-out */ +#define AT91_US_SENDA (1 << 12) /* Send Address */ +#define AT91_US_RSTIT (1 << 13) /* Reset Iterations */ +#define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ +#define AT91_US_RETTO (1 << 15) /* Rearm Time-out */ +#define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ +#define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ +#define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */ +#define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */ + +#define AT91_US_MR 0x04 /* Mode Register */ +#define AT91_US_USMODE (0xf << 0) /* Mode of the USART */ +#define AT91_US_USMODE_NORMAL 0 +#define AT91_US_USMODE_RS485 1 +#define AT91_US_USMODE_HWHS 2 +#define AT91_US_USMODE_MODEM 3 +#define AT91_US_USMODE_ISO7816_T0 4 +#define AT91_US_USMODE_ISO7816_T1 6 +#define AT91_US_USMODE_IRDA 8 +#define AT91_US_USCLKS (3 << 4) /* Clock Selection */ +#define AT91_US_CHRL (3 << 6) /* Character Length */ +#define AT91_US_CHRL_5 (0 << 6) +#define AT91_US_CHRL_6 (1 << 6) +#define AT91_US_CHRL_7 (2 << 6) +#define AT91_US_CHRL_8 (3 << 6) +#define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */ +#define AT91_US_PAR (7 << 9) /* Parity Type */ +#define AT91_US_PAR_EVEN (0 << 9) +#define AT91_US_PAR_ODD (1 << 9) +#define AT91_US_PAR_SPACE (2 << 9) +#define AT91_US_PAR_MARK (3 << 9) +#define AT91_US_PAR_NONE (4 << 9) +#define AT91_US_PAR_MULTI_DROP (6 << 9) +#define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */ +#define AT91_US_NBSTOP_1 (0 << 12) +#define AT91_US_NBSTOP_1_5 (1 << 12) +#define AT91_US_NBSTOP_2 (2 << 12) +#define AT91_US_CHMODE (3 << 14) /* Channel Mode */ +#define AT91_US_CHMODE_NORMAL (0 << 14) +#define AT91_US_CHMODE_ECHO (1 << 14) +#define AT91_US_CHMODE_LOC_LOOP (2 << 14) +#define AT91_US_CHMODE_REM_LOOP (3 << 14) +#define AT91_US_MSBF (1 << 16) /* Bit Order */ +#define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */ +#define AT91_US_CLKO (1 << 18) /* Clock Output Select */ +#define AT91_US_OVER (1 << 19) /* Oversampling Mode */ +#define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ +#define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */ +#define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */ +#define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ + +#define AT91_US_IER 0x08 /* Interrupt Enable Register */ +#define AT91_US_RXRDY (1 << 0) /* Receiver Ready */ +#define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */ +#define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */ +#define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */ +#define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ +#define AT91_US_OVRE (1 << 5) /* Overrun Error */ +#define AT91_US_FRAME (1 << 6) /* Framing Error */ +#define AT91_US_PARE (1 << 7) /* Parity Error */ +#define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */ +#define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */ +#define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ +#define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ +#define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */ +#define AT91_US_NACK (1 << 13) /* Non Acknowledge */ +#define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */ +#define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ +#define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ +#define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */ +#define AT91_US_RI (1 << 20) /* RI */ +#define AT91_US_DSR (1 << 21) /* DSR */ +#define AT91_US_DCD (1 << 22) /* DCD */ +#define AT91_US_CTS (1 << 23) /* CTS */ + +#define AT91_US_IDR 0x0c /* Interrupt Disable Register */ +#define AT91_US_IMR 0x10 /* Interrupt Mask Register */ +#define AT91_US_CSR 0x14 /* Channel Status Register */ +#define AT91_US_RHR 0x18 /* Receiver Holding Register */ +#define AT91_US_THR 0x1c /* Transmitter Holding Register */ + +#define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */ +#define AT91_US_CD (0xffff << 0) /* Clock Divider */ + +#define AT91_US_RTOR 0x24 /* Receiver Time-out Register */ +#define AT91_US_TO (0xffff << 0) /* Time-out Value */ + +#define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */ +#define AT91_US_TG (0xff << 0) /* Timeguard Value */ + +#define AT91_US_FIDI 0x40 /* FI DI Ratio Register */ +#define AT91_US_NER 0x44 /* Number of Errors Register */ +#define AT91_US_IF 0x4c /* IrDA Filter Register */ + +#endif diff --git a/include/asm-arm/mach/serial_at91rm9200.h b/include/asm-arm/mach/serial_at91rm9200.h new file mode 100644 index 000000000000..98f4b0cb883c --- /dev/null +++ b/include/asm-arm/mach/serial_at91rm9200.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/mach/serial_at91rm9200.h + * + * Based on serial_sa1100.h by Nicolas Pitre + * + * Copyright (C) 2002 ATMEL Rousset + * + * Low level machine dependent UART functions. + */ +#include + +struct uart_port; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct at91rm9200_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*enable_ms)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); + int (*open)(struct uart_port *); + void (*close)(struct uart_port *); +}; + +#if defined(CONFIG_SERIAL_AT91) +void at91_register_uart_fns(struct at91rm9200_port_fns *fns); +void at91_register_uart(int idx, int port); +#else +#define at91_register_uart_fns(fns) do { } while (0) +#define at91_register_uart(idx,port) do { } while (0) +#endif + + diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e3710d7e260a..a8187c3c8a7b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -67,6 +67,9 @@ /* Parisc type numbers. */ #define PORT_MUX 48 +/* Atmel AT91RM9200 SoC */ +#define PORT_AT91RM9200 49 + /* Macintosh Zilog type numbers */ #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ #define PORT_PMAC_ZILOG 51 From f0a13854be269357ff70022524ec503d3cba6a32 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 10 Jan 2006 16:59:28 +0000 Subject: [PATCH 02/11] [ARM] 3243/2: AT91RM9200 support for 2.6 (Atmel DK & EK boards) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for Atmel's DK and EK boards. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/configs/at91rm9200dk_defconfig | 1009 +++++++++++++++++++++++ arch/arm/configs/at91rm9200ek_defconfig | 998 ++++++++++++++++++++++ arch/arm/mach-at91rm9200/Makefile | 4 +- arch/arm/mach-at91rm9200/board-dk.c | 138 ++++ arch/arm/mach-at91rm9200/board-ek.c | 131 +++ 5 files changed, 2278 insertions(+), 2 deletions(-) create mode 100644 arch/arm/configs/at91rm9200dk_defconfig create mode 100644 arch/arm/configs/at91rm9200ek_defconfig create mode 100644 arch/arm/mach-at91rm9200/board-dk.c create mode 100644 arch/arm/mach-at91rm9200/board-ek.c diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig new file mode 100644 index 000000000000..5cdd13acf8ff --- /dev/null +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -0,0 +1,1009 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15 +# Mon Jan 9 20:54:30 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +CONFIG_ARCH_AT91RM9200DK=y +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ATEB9200 is not set + +# +# AT91RM9200 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x10000000 +CONFIG_MTD_PHYSMAP_LEN=0x200000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_AT91_DATAFLASH=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +CONFIG_AT91_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig new file mode 100644 index 000000000000..20838ccf1da7 --- /dev/null +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -0,0 +1,998 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15 +# Mon Jan 9 20:57:31 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +# CONFIG_ARCH_AT91RM9200DK is not set +CONFIG_MACH_AT91RM9200EK=y +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ATEB9200 is not set + +# +# AT91RM9200 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x10000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_AT91_DATAFLASH=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +CONFIG_AT91_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_S1D13XXX=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index 1f2805ca6e21..a1b4ea3ec470 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -8,8 +8,8 @@ obj-n := obj- := # Board-specific support -#obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -#obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o #obj-$(CONFIG_MACH_CSB337) += board-csb337.o #obj-$(CONFIG_MACH_CSB637) += board-csb637.o #obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c new file mode 100644 index 000000000000..8c747a31b95a --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -0,0 +1,138 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-dk.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init dk_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(BGA_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +#define DK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +#define DK_SERIAL_CONSOLE 0 /* ttyS0 */ + +static void __init dk_map_io(void) +{ + int serial[AT91_NR_UART] = DK_UART_MAP; + int i; + + at91rm9200_map_io(); + + /* Initialize clocks: 18.432 MHz crystal */ + at91_clock_init(18432000); + +#ifdef CONFIG_SERIAL_AT91 + at91_console_port = DK_SERIAL_CONSOLE; + memcpy(at91_serial_map, serial, sizeof(serial)); + + /* Register UARTs */ + for (i = 0; i < AT91_NR_UART; i++) { + if (at91_serial_map[i] >= 0) + at91_register_uart(i, at91_serial_map[i]); + } +#endif +} + +static struct at91_eth_data __initdata dk_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata dk_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata dk_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +static struct at91_cf_data __initdata dk_cf_data = { + .det_pin = AT91_PIN_PB0, + .rst_pin = AT91_PIN_PC5, + // .irq_pin = ... not connected + // .vcc_pin = ... always powered +}; + +static struct at91_mmc_data __initdata dk_mmc_data = { + .is_b = 0, + .wire4 = 1, +}; + +static void __init dk_board_init(void) +{ + /* Ethernet */ + at91_add_device_eth(&dk_eth_data); + /* USB Host */ + at91_add_device_usbh(&dk_usbh_data); + /* USB Device */ + at91_add_device_udc(&dk_udc_data); + /* Compact Flash */ + at91_add_device_cf(&dk_cf_data); + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */ + at91_add_device_mmc(&dk_mmc_data); + /* VGA */ +// dk_add_device_video(); +} + +MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") + /* Maintainer: SAN People/Atmel */ + .phys_ram = AT91_SDRAM_BASE, + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = dk_map_io, + .init_irq = dk_init_irq, + .init_machine = dk_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c new file mode 100644 index 000000000000..d140645711be --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -0,0 +1,131 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ek.c + * + * Copyright (C) 2005 SAN People + * + * Epson S1D framebuffer glue code is: + * Copyright (C) 2005 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init ek_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(BGA_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +#define EK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +#define EK_SERIAL_CONSOLE 0 /* ttyS0 */ + +static void __init ek_map_io(void) +{ + int serial[AT91_NR_UART] = EK_UART_MAP; + int i; + + at91rm9200_map_io(); + + /* Initialize clocks: 18.432 MHz crystal */ + at91_clock_init(18432000); + +#ifdef CONFIG_SERIAL_AT91 + at91_console_port = EK_SERIAL_CONSOLE; + memcpy(at91_serial_map, serial, sizeof(serial)); + + /* Register UARTs */ + for (i = 0; i < AT91_NR_UART; i++) { + if (serial[i] >= 0) + at91_register_uart(i, serial[i]); + } +#endif +} + +static struct at91_eth_data __initdata ek_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +static struct at91_mmc_data __initdata ek_mmc_data = { + .det_pin = AT91_PIN_PB27, + .is_b = 0, + .wire4 = 1, + .wp_pin = AT91_PIN_PA17, +}; + +static void __init ek_board_init(void) +{ + /* Ethernet */ + at91_add_device_eth(&ek_eth_data); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* MMC */ + at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */ + at91_add_device_mmc(&ek_mmc_data); + /* VGA */ +// ek_add_device_video(); +} + +MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") + /* Maintainer: SAN People/Atmel */ + .phys_ram = AT91_SDRAM_BASE, + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END From 49978db4f39950cdaaf967e1aad4a324bdc2e180 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 10 Jan 2006 16:59:29 +0000 Subject: [PATCH 03/11] [ARM] 3247/1: AT91RM9200 support for 2.6 (Cogent CSB337 & CSB637 boards) (Patch #3244) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for the Cogent CSB337 and CSB637 boards. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/configs/csb337_defconfig | 1136 +++++++++++++++++++++++ arch/arm/configs/csb637_defconfig | 1116 ++++++++++++++++++++++ arch/arm/mach-at91rm9200/Makefile | 4 +- arch/arm/mach-at91rm9200/board-csb337.c | 143 +++ arch/arm/mach-at91rm9200/board-csb637.c | 116 +++ 5 files changed, 2513 insertions(+), 2 deletions(-) create mode 100644 arch/arm/configs/csb337_defconfig create mode 100644 arch/arm/configs/csb637_defconfig create mode 100644 arch/arm/mach-at91rm9200/board-csb337.c create mode 100644 arch/arm/mach-at91rm9200/board-csb637.c diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig new file mode 100644 index 000000000000..885a3184830a --- /dev/null +++ b/arch/arm/configs/csb337_defconfig @@ -0,0 +1,1136 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15 +# Mon Jan 9 21:51:31 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +CONFIG_MACH_CSB337=y +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ATEB9200 is not set + +# +# AT91RM9200 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set +CONFIG_MTD_CSB337=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_AT91_DATAFLASH is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=y +# CONFIG_AT91_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +CONFIG_USB_SERIAL_MCT_U232=y +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig new file mode 100644 index 000000000000..95a96a5462a0 --- /dev/null +++ b/arch/arm/configs/csb637_defconfig @@ -0,0 +1,1116 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15 +# Mon Jan 9 21:52:00 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +CONFIG_MACH_CSB637=y +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ATEB9200 is not set + +# +# AT91RM9200 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set +CONFIG_MTD_CSB637=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_AT91_DATAFLASH is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=y +# CONFIG_AT91_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +CONFIG_USB_SERIAL_MCT_U232=y +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index a1b4ea3ec470..75e6ee318ded 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -10,8 +10,8 @@ obj- := # Board-specific support obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o -#obj-$(CONFIG_MACH_CSB337) += board-csb337.o -#obj-$(CONFIG_MACH_CSB637) += board-csb637.o +obj-$(CONFIG_MACH_CSB337) += board-csb337.o +obj-$(CONFIG_MACH_CSB637) += board-csb637.o #obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o #obj-$(CONFIG_MACH_KB9200) += board-kb9202.o diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c new file mode 100644 index 000000000000..4aec834ee47f --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -0,0 +1,143 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-csb337.c + * + * Copyright (C) 2005 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init csb337_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(BGA_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +#define CSB337_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +#define CSB337_SERIAL_CONSOLE 0 /* ttyS0 */ + +static void __init csb337_map_io(void) +{ + int serial[AT91_NR_UART] = CSB337_UART_MAP; + int i; + + at91rm9200_map_io(); + + /* Initialize clocks: 3.6864 MHz crystal */ + at91_clock_init(3686400); + +#ifdef CONFIG_SERIAL_AT91 + at91_console_port = CSB337_SERIAL_CONSOLE; + memcpy(at91_serial_map, serial, sizeof(serial)); + + /* Register UARTs */ + for (i = 0; i < AT91_NR_UART; i++) { + if (serial[i] >= 0) + at91_register_uart(i, serial[i]); + } +#endif +} + +static struct at91_eth_data __initdata csb337_eth_data = { + .phy_irq_pin = AT91_PIN_PC2, + .is_rmii = 0, +}; + +static struct at91_usbh_data __initdata csb337_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata csb337_udc_data = { + // this has no VBUS sensing pin + .pullup_pin = AT91_PIN_PA24, +}; + +static struct at91_cf_data __initdata csb337_cf_data = { + /* + * connector P4 on the CSB 337 mates to + * connector P8 on the CSB 300CF + */ + + /* CSB337 specific */ + .det_pin = AT91_PIN_PC3, + + /* CSB300CF specific */ + .irq_pin = AT91_PIN_PA19, + .vcc_pin = AT91_PIN_PD0, + .rst_pin = AT91_PIN_PD2, +}; + +static struct at91_mmc_data __initdata csb337_mmc_data = { + .det_pin = AT91_PIN_PD5, + .is_b = 0, + .wire4 = 1, + .wp_pin = AT91_PIN_PD6, +}; + +static void __init csb337_board_init(void) +{ + /* Ethernet */ + at91_add_device_eth(&csb337_eth_data); + /* USB Host */ + at91_add_device_usbh(&csb337_usbh_data); + /* USB Device */ + at91_add_device_udc(&csb337_udc_data); + /* Compact Flash */ + at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */ + at91_add_device_cf(&csb337_cf_data); + /* MMC */ + at91_add_device_mmc(&csb337_mmc_data); +} + +MACHINE_START(CSB337, "Cogent CSB337") + /* Maintainer: Bill Gatliff */ + .phys_ram = AT91_SDRAM_BASE, + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = csb337_map_io, + .init_irq = csb337_init_irq, + .init_machine = csb337_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c new file mode 100644 index 000000000000..23e4cc21481a --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-csb637.c + * + * Copyright (C) 2005 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init csb637_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(BGA_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +#define CSB637_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +#define CSB637_SERIAL_CONSOLE 0 /* ttyS0 */ + +static void __init csb637_map_io(void) +{ + int serial[AT91_NR_UART] = CSB637_UART_MAP; + int i; + + at91rm9200_map_io(); + + /* Initialize clocks: 3.6864 MHz crystal */ + at91_clock_init(3686400); + +#ifdef CONFIG_SERIAL_AT91 + at91_console_port = CSB637_SERIAL_CONSOLE; + memcpy(at91_serial_map, serial, sizeof(serial)); + + /* Register UARTs */ + for (i = 0; i < AT91_NR_UART; i++) { + if (serial[i] >= 0) + at91_register_uart(i, serial[i]); + } +#endif +} + +static struct at91_eth_data __initdata csb637_eth_data = { + .phy_irq_pin = AT91_PIN_PC0, + .is_rmii = 0, +}; + +static struct at91_usbh_data __initdata csb637_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata csb637_udc_data = { + .vbus_pin = AT91_PIN_PB28, + .pullup_pin = AT91_PIN_PB1, +}; + +static void __init csb637_board_init(void) +{ + /* Ethernet */ + at91_add_device_eth(&csb637_eth_data); + /* USB Host */ + at91_add_device_usbh(&csb637_usbh_data); + /* USB Device */ + at91_add_device_udc(&csb637_udc_data); +} + +MACHINE_START(CSB637, "Cogent CSB637") + /* Maintainer: Bill Gatliff */ + .phys_ram = AT91_SDRAM_BASE, + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = csb637_map_io, + .init_irq = csb637_init_irq, + .init_machine = csb637_board_init, +MACHINE_END From b016450f9f603210239e1a91e3c28f17c310dcc7 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 10 Jan 2006 17:16:12 +0000 Subject: [PATCH 04/11] [ARM] 3250/1: Change pxa2xx PCMCIA drivers to use platform_device_alloc Patch from Richard Purdie Change mainstone and sharpsl pxa2xx pcmcia drivers to use platform_device_alloc which fixes a memory leak. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- drivers/pcmcia/pxa2xx_mainstone.c | 15 +++++---------- drivers/pcmcia/pxa2xx_sharpsl.c | 19 +++++++------------ 2 files changed, 12 insertions(+), 22 deletions(-) diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 5d957dfe23d9..fda06941e730 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c @@ -171,27 +171,22 @@ static int __init mst_pcmcia_init(void) { int ret; - mst_pcmcia_device = kzalloc(sizeof(*mst_pcmcia_device), GFP_KERNEL); + mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); if (!mst_pcmcia_device) return -ENOMEM; - mst_pcmcia_device->name = "pxa2xx-pcmcia"; + mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops; - ret = platform_device_register(mst_pcmcia_device); + ret = platform_device_add(mst_pcmcia_device); + if (ret) - kfree(mst_pcmcia_device); + platform_device_put(mst_pcmcia_device); return ret; } static void __exit mst_pcmcia_exit(void) { - /* - * This call is supposed to free our mst_pcmcia_device. - * Unfortunately platform_device don't have a free method, and - * we can't assume it's free of any reference at this point so we - * can't free it either. - */ platform_device_unregister(mst_pcmcia_device); } diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index 12a7244a5ec8..fd3647368955 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -263,30 +263,25 @@ static int __init sharpsl_pcmcia_init(void) { int ret; - sharpsl_pcmcia_ops.nr=platform_scoop_config->num_devs; - sharpsl_pcmcia_device = kzalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL); + sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs; + sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!sharpsl_pcmcia_device) return -ENOMEM; - sharpsl_pcmcia_device->name = "pxa2xx-pcmcia"; sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops; - sharpsl_pcmcia_device->dev.parent=platform_scoop_config->devs[0].dev; + sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev; + + ret = platform_device_add(sharpsl_pcmcia_device); - ret = platform_device_register(sharpsl_pcmcia_device); if (ret) - kfree(sharpsl_pcmcia_device); + platform_device_put(sharpsl_pcmcia_device); return ret; } static void __exit sharpsl_pcmcia_exit(void) { - /* - * This call is supposed to free our sharpsl_pcmcia_device. - * Unfortunately platform_device don't have a free method, and - * we can't assume it's free of any reference at this point so we - * can't free it either. - */ platform_device_unregister(sharpsl_pcmcia_device); } From a3e49436867e6c7acc1b5eed21d30c88d156825b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 10 Jan 2006 19:48:02 +0000 Subject: [PATCH 05/11] [ARM] 3252/1: help gcc do the best with ___arch__swab32 Patch from Nicolas Pitre Depending on your gcc version, the current C-only implementation would produce suboptimal code, ranging from a bad register selection forcing an additional mov instruction to a failure to merge the eor and the ror in a single instruction. With a little help gcc always produces the best code. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- include/asm-arm/byteorder.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h index 741f5bc5d016..17eaf8bdf092 100644 --- a/include/asm-arm/byteorder.h +++ b/include/asm-arm/byteorder.h @@ -22,7 +22,16 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) { __u32 t; - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + if (__builtin_constant_p(x)) { + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + } else { + /* + * The compiler needs a bit of a hint here to always do the + * right thing and not screw it up to different degrees + * depending on the gcc version. + */ + asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); + } x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ From 37134cd55d57e95d3f606c6f2a57fa496bdad333 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 12 Jan 2006 16:12:21 +0000 Subject: [PATCH 06/11] [ARM] 3209/1: Configurable DMA-consistent memory region Patch from Kevin Hilman This patch increase available DMA-consistent memory allocated by dma_coherent_alloc(). The default remains at 2M (defined in asm/memory.h) and each platform has the ability to override in asm/arch-foo/memory.h. Signed-off-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/mm/consistent.c | 53 +++++++++++++++++++++++++++++++--------- include/asm-arm/memory.h | 9 +++++++ 2 files changed, 50 insertions(+), 12 deletions(-) diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 0513ed1b2fcf..c2ee18d2075e 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -20,15 +20,25 @@ #include #include +#include + +/* Sanity check size */ +#if (CONSISTENT_DMA_SIZE % SZ_2M) +#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" +#endif -#define CONSISTENT_BASE (0xffc00000) #define CONSISTENT_END (0xffe00000) +#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE) + #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) +#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) + /* - * This is the page table (2MB) covering uncached, DMA consistent allocations + * These are the page tables (2MB each) covering uncached, DMA consistent allocations */ -static pte_t *consistent_pte; +static pte_t *consistent_pte[NUM_CONSISTENT_PTES]; static DEFINE_SPINLOCK(consistent_lock); /* @@ -142,7 +152,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, unsigned long order; u64 mask = ISA_DMA_THRESHOLD, limit; - if (!consistent_pte) { + if (!consistent_pte[0]) { printk(KERN_ERR "%s: not initialised\n", __func__); dump_stack(); return NULL; @@ -205,9 +215,12 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, c = vm_region_alloc(&consistent_head, size, gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); if (c) { - pte_t *pte = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + pte_t *pte; struct page *end = page + (1 << order); + int idx = CONSISTENT_PTE_INDEX(c->vm_start); + u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); + pte = consistent_pte[idx] + off; c->vm_pages = page; /* @@ -226,6 +239,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, set_pte(pte, mk_pte(page, prot)); page++; pte++; + off++; + if (off >= PTRS_PER_PTE) { + off = 0; + pte = consistent_pte[++idx]; + } } while (size -= PAGE_SIZE); /* @@ -327,6 +345,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr struct vm_region *c; unsigned long flags, addr; pte_t *ptep; + int idx; + u32 off; WARN_ON(irqs_disabled()); @@ -347,7 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr size = c->vm_end - c->vm_start; } - ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + idx = CONSISTENT_PTE_INDEX(c->vm_start); + off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1); + ptep = consistent_pte[idx] + off; addr = c->vm_start; do { pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); @@ -355,6 +377,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr ptep++; addr += PAGE_SIZE; + off++; + if (off >= PTRS_PER_PTE) { + off = 0; + ptep = consistent_pte[++idx]; + } if (!pte_none(pte) && pte_present(pte)) { pfn = pte_pfn(pte); @@ -401,11 +428,12 @@ static int __init consistent_init(void) pgd_t *pgd; pmd_t *pmd; pte_t *pte; - int ret = 0; + int ret = 0, i = 0; + u32 base = CONSISTENT_BASE; do { - pgd = pgd_offset(&init_mm, CONSISTENT_BASE); - pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE); + pgd = pgd_offset(&init_mm, base); + pmd = pmd_alloc(&init_mm, pgd, base); if (!pmd) { printk(KERN_ERR "%s: no pmd tables\n", __func__); ret = -ENOMEM; @@ -413,15 +441,16 @@ static int __init consistent_init(void) } WARN_ON(!pmd_none(*pmd)); - pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); + pte = pte_alloc_kernel(pmd, base); if (!pte) { printk(KERN_ERR "%s: no pte tables\n", __func__); ret = -ENOMEM; break; } - consistent_pte = pte; - } while (0); + consistent_pte[i++] = pte; + base += (1 << PGDIR_SHIFT); + } while (base < CONSISTENT_END); return ret; } diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index 3d7f08bd9030..b4e1146ab682 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -25,6 +25,7 @@ #include #include #include +#include #ifndef TASK_SIZE /* @@ -47,6 +48,14 @@ #define PAGE_OFFSET UL(0xc0000000) #endif +/* + * Size of DMA-consistent memory region. Must be multiple of 2M, + * between 2MB and 14MB inclusive. + */ +#ifndef CONSISTENT_DMA_SIZE +#define CONSISTENT_DMA_SIZE SZ_2M +#endif + /* * Physical vs virtual RAM address space conversion. These are * private definitions which should NOT be used outside memory.h From 6b090a25fe58067e4bf4515d5056df1f07b64849 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 12 Jan 2006 16:28:16 +0000 Subject: [PATCH 07/11] [ARM] 3234/1: Update cpu_architecture() to deal with the new ID format Patch from Catalin Marinas Since ARM1176, the CPU ID format has changed and it will also be used for future ARM architectures. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 2cab741ad0f8..c45d10d07bde 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -205,7 +205,7 @@ static const char *proc_arch[] = { "5TE", "5TEJ", "6TEJ", - "?(10)", + "7", "?(11)", "?(12)", "?(13)", @@ -258,14 +258,17 @@ int cpu_architecture(void) { int cpu_arch; - if ((processor_id & 0x0000f000) == 0) { + if ((processor_id & 0x0008f000) == 0) { cpu_arch = CPU_ARCH_UNKNOWN; - } else if ((processor_id & 0x0000f000) == 0x00007000) { + } else if ((processor_id & 0x0008f000) == 0x00007000) { cpu_arch = (processor_id & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3; - } else { + } else if ((processor_id & 0x00080000) == 0x00000000) { cpu_arch = (processor_id >> 16) & 7; if (cpu_arch) cpu_arch += CPU_ARCH_ARMv3; + } else { + /* the revised CPUID */ + cpu_arch = ((processor_id >> 12) & 0xf) - 0xb + CPU_ARCH_ARMv6; } return cpu_arch; @@ -863,11 +866,11 @@ static int c_show(struct seq_file *m, void *v) seq_printf(m, "\nCPU implementer\t: 0x%02x\n", processor_id >> 24); seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]); - if ((processor_id & 0x0000f000) == 0x00000000) { + if ((processor_id & 0x0008f000) == 0x00000000) { /* pre-ARM7 */ seq_printf(m, "CPU part\t\t: %07x\n", processor_id >> 4); } else { - if ((processor_id & 0x0000f000) == 0x00007000) { + if ((processor_id & 0x0008f000) == 0x00007000) { /* ARM7 */ seq_printf(m, "CPU variant\t: 0x%02x\n", (processor_id >> 16) & 127); From ece5f7b3c4fde70a1ae4add7372ebca5c90bc34d Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 12 Jan 2006 16:30:23 +0000 Subject: [PATCH 08/11] [ARM] 3237/1: PXA I2C driver updates Patch from Richard Purdie This patch adds a check to see if the pxa i2c interface is enabled before allowing it to be used and resets it if found to be disabled. This automatically restores the interface if the device has been suspended and resumed without causing any suspend/resume call ordering issues. The patch also fixes a build warning and adds an appropriate module licence (the module is gpl according to the header). Signed-off-by: Richard Purdie Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pxa.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 70f7ab829d36..86e2234faf80 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -899,6 +899,12 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num struct pxa_i2c *i2c = adap->algo_data; int ret, i; + /* If the I2C controller is disabled we need to reset it (probably due + to a suspend/resume destroying state). We do this here as we can then + avoid worrying about resuming the controller before its users. */ + if (!(ICR & ICR_IUE)) + i2c_pxa_reset(i2c); + for (i = adap->retries; i >= 0; i--) { ret = i2c_pxa_do_xfer(i2c, msgs, num); if (ret != I2C_RETRY) @@ -939,7 +945,9 @@ static struct pxa_i2c i2c_pxa = { static int i2c_pxa_probe(struct platform_device *dev) { struct pxa_i2c *i2c = &i2c_pxa; +#ifdef CONFIG_I2C_PXA_SLAVE struct i2c_pxa_platform_data *plat = dev->dev.platform_data; +#endif int ret; #ifdef CONFIG_PXA27x @@ -1024,5 +1032,7 @@ static void i2c_adap_pxa_exit(void) return platform_driver_unregister(&i2c_pxa_driver); } +MODULE_LICENSE("GPL"); + module_init(i2c_adap_pxa_init); module_exit(i2c_adap_pxa_exit); From 90303b102353302e84758f245906368907e6a23b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 12 Jan 2006 16:53:51 +0000 Subject: [PATCH 09/11] [ARM] 3256/1: Make the function-returning ldm's use sp as the base register Patch from Catalin Marinas If the low interrupt latency mode is enabled for the CPU (from ARMv6 onwards), the ldm/stm instructions are no longer atomic. An ldm instruction restoring the sp and pc registers can be interrupted immediately after sp was updated but before the pc. If this happens, the CPU restores the base register to the value before the ldm instruction but if the base register is not sp, the interrupt routine will corrupt the stack and the restarted ldm instruction will load garbage. Note that future ARM cores might always run in the low interrupt latency mode. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/fiq.c | 4 ++-- arch/arm/lib/csumpartialcopy.S | 6 ++++-- arch/arm/lib/csumpartialcopygeneric.S | 6 ++---- arch/arm/lib/csumpartialcopyuser.S | 8 +++++--- 4 files changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 9299dfc25698..1ec3f7faa259 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -101,7 +101,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) ldmia %1, {r8 - r14}\n\ msr cpsr_c, %0 @ return to SVC mode\n\ mov r0, r0\n\ - ldmea fp, {fp, sp, pc}" + ldmfd sp, {fp, sp, pc}" : "=&r" (tmp) : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); } @@ -119,7 +119,7 @@ void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs) stmia %1, {r8 - r14}\n\ msr cpsr_c, %0 @ return to SVC mode\n\ mov r0, r0\n\ - ldmea fp, {fp, sp, pc}" + ldmfd sp, {fp, sp, pc}" : "=&r" (tmp) : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); } diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S index 990ee63b2465..21effe0dbf97 100644 --- a/arch/arm/lib/csumpartialcopy.S +++ b/arch/arm/lib/csumpartialcopy.S @@ -18,11 +18,13 @@ */ .macro save_regs + mov ip, sp stmfd sp!, {r1, r4 - r8, fp, ip, lr, pc} + sub fp, ip, #4 .endm - .macro load_regs,flags - LOADREGS(\flags,fp,{r1, r4 - r8, fp, sp, pc}) + .macro load_regs + ldmfd sp, {r1, r4 - r8, fp, sp, pc} .endm .macro load1b, reg1 diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index 4a4609c19095..c50e8f5285d1 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -23,7 +23,7 @@ len .req r2 sum .req r3 .Lzero: mov r0, sum - load_regs ea + load_regs /* * Align an unaligned destination pointer. We know that @@ -87,9 +87,7 @@ sum .req r3 b .Ldone FN_ENTRY - mov ip, sp save_regs - sub fp, ip, #4 cmp len, #8 @ Ensure that we have at least blo .Lless8 @ 8 bytes to copy. @@ -163,7 +161,7 @@ FN_ENTRY ldr sum, [sp, #0] @ dst tst sum, #1 movne r0, r0, ror #8 - load_regs ea + load_regs .Lsrc_not_aligned: adc sum, sum, #0 @ include C from dst alignment diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 333bca292de9..c3b93e22ea25 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -18,11 +18,13 @@ .text .macro save_regs + mov ip, sp stmfd sp!, {r1 - r2, r4 - r8, fp, ip, lr, pc} + sub fp, ip, #4 .endm - .macro load_regs,flags - ldm\flags fp, {r1, r2, r4-r8, fp, sp, pc} + .macro load_regs + ldmfd sp, {r1, r2, r4-r8, fp, sp, pc} .endm .macro load1b, reg1 @@ -100,5 +102,5 @@ 6002: teq r2, r1 strneb r0, [r1], #1 bne 6002b - load_regs ea + load_regs .previous From f4619025a51747a3788fd1bb6bdc46e368a889a7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Jan 2006 17:17:57 +0000 Subject: [PATCH 10/11] [ARM] Allow r2 to be passed through the decompressor to the kernel This is part of a patch from Marc Singer to allow r2 to be passed to the kernel. Marc's original comments follow: This revised R2 (atags pointer) patch incorporates comments from Nico Pitre and Ben Dooks. It modifies the head.S files such that the R2 value set by the bootloader is conveyed to the kernel startup code. The kernel head.S heuristically validates the pointer. It will set R2 to zero if it believes the pointer is invalid. Presently, it requires that the ATAGS list reside in the first 16KiB of physical RAM. Relaxing this contraint may be both desirable as well as tricky. Signed-off-by: Marc Singer Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 46 ++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 21 deletions(-) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6abafb6f1844..aaa47400eb9c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -84,7 +84,7 @@ kputc #'\n' kphex r5, 8 /* decompressed kernel start */ kputc #'-' - kphex r8, 8 /* decompressed kernel end */ + kphex r9, 8 /* decompressed kernel end */ kputc #'>' kphex r4, 8 /* kernel execution address */ kputc #'\n' @@ -116,7 +116,7 @@ start: .word start @ absolute load/run zImage address .word _edata @ zImage end address 1: mov r7, r1 @ save architecture ID - mov r8, #0 @ save r0 + mov r8, r2 @ save atags pointer #ifndef __ARM_ARCH_2__ /* @@ -144,7 +144,7 @@ not_angel: /* * some architecture specific code can be inserted - * by the linker here, but it should preserve r7 and r8. + * by the linker here, but it should preserve r7, r8, and r9. */ .text @@ -249,16 +249,17 @@ not_relocated: mov r0, #0 * r5 = decompressed kernel start * r6 = processor ID * r7 = architecture ID - * r8-r14 = unused + * r8 = atags pointer + * r9-r14 = corrupted */ add r1, r5, r0 @ end of decompressed kernel adr r2, reloc_start ldr r3, LC1 add r3, r2, r3 -1: ldmia r2!, {r8 - r13} @ copy relocation code - stmia r1!, {r8 - r13} - ldmia r2!, {r8 - r13} - stmia r1!, {r8 - r13} +1: ldmia r2!, {r9 - r14} @ copy relocation code + stmia r1!, {r9 - r14} + ldmia r2!, {r9 - r14} + stmia r1!, {r9 - r14} cmp r2, r3 blo 1b @@ -308,11 +309,12 @@ params: ldr r0, =params_phys * r4 = kernel execution address * r6 = processor ID * r7 = architecture number - * r8 = run-time address of "start" + * r8 = atags pointer + * r9 = run-time address of "start" (???) * On exit, - * r1, r2, r3, r8, r9, r12 corrupted + * r1, r2, r3, r9, r10, r12 corrupted * This routine must preserve: - * r4, r5, r6, r7 + * r4, r5, r6, r7, r8 */ .align 5 cache_on: mov r3, #8 @ cache_on function @@ -326,15 +328,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size * bits for the RAM area only. */ mov r0, r3 - mov r8, r0, lsr #18 - mov r8, r8, lsl #18 @ start of RAM - add r9, r8, #0x10000000 @ a reasonable RAM size + mov r9, r0, lsr #18 + mov r9, r9, lsl #18 @ start of RAM + add r10, r9, #0x10000000 @ a reasonable RAM size mov r1, #0x12 orr r1, r1, #3 << 10 add r2, r3, #16384 1: cmp r1, r8 @ if virt > start of RAM orrhs r1, r1, #0x0c @ set cacheable, bufferable - cmp r1, r9 @ if virt > end of RAM + cmp r1, r10 @ if virt > end of RAM bichs r1, r1, #0x0c @ clear cacheable, bufferable str r1, [r0], #4 @ 1:1 mapping add r1, r1, #1048576 @@ -403,26 +405,28 @@ __common_cache_on: * r5 = decompressed kernel start * r6 = processor ID * r7 = architecture ID - * r8-r14 = unused + * r8 = atags pointer + * r9-r14 = corrupted */ .align 5 -reloc_start: add r8, r5, r0 +reloc_start: add r9, r5, r0 debug_reloc_start mov r1, r4 1: .rept 4 - ldmia r5!, {r0, r2, r3, r9 - r13} @ relocate kernel - stmia r1!, {r0, r2, r3, r9 - r13} + ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel + stmia r1!, {r0, r2, r3, r10 - r14} .endr - cmp r5, r8 + cmp r5, r9 blo 1b debug_reloc_end call_kernel: bl cache_clean_flush bl cache_off - mov r0, #0 + mov r0, #0 @ must be zero mov r1, r7 @ restore architecture number + mov r2, r8 @ restore atags pointer mov pc, r4 @ call kernel /* From 00431707be0cc1236ee08459367872b57da5be29 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 12 Jan 2006 18:42:23 +0000 Subject: [PATCH 11/11] [ARM] Convert some arm semaphores to mutexes The arm clock semaphores are strict mutexes, convert them to the new mutex implementation Signed-off-by: Arjan van de Ven Signed-off-by: Russell King --- arch/arm/common/rtctime.c | 15 ++++++++------- arch/arm/kernel/ecard.c | 7 ++++--- arch/arm/mach-aaec2000/clock.c | 15 ++++++++------- arch/arm/mach-integrator/clock.c | 15 ++++++++------- arch/arm/mach-pxa/ssp.c | 17 +++++++++-------- arch/arm/mach-realview/clock.c | 15 ++++++++------- arch/arm/mach-s3c2410/clock.c | 11 ++++++----- arch/arm/mach-versatile/clock.c | 15 ++++++++------- arch/arm/plat-omap/clock.c | 15 ++++++++------- 9 files changed, 67 insertions(+), 58 deletions(-) diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index 72b03f201eb9..00f6278f42b8 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -34,7 +35,7 @@ static unsigned long rtc_irq_data; /* * rtc_sem protects rtc_inuse and rtc_ops */ -static DECLARE_MUTEX(rtc_sem); +static DEFINE_MUTEX(rtc_mutex); static unsigned long rtc_inuse; static struct rtc_ops *rtc_ops; @@ -355,7 +356,7 @@ static int rtc_open(struct inode *inode, struct file *file) { int ret; - down(&rtc_sem); + mutex_lock(&rtc_mutex); if (rtc_inuse) { ret = -EBUSY; @@ -373,7 +374,7 @@ static int rtc_open(struct inode *inode, struct file *file) rtc_inuse = 1; } } - up(&rtc_sem); + mutex_unlock(&rtc_mutex); return ret; } @@ -479,7 +480,7 @@ int register_rtc(struct rtc_ops *ops) { int ret = -EBUSY; - down(&rtc_sem); + mutex_lock(&rtc_mutex); if (rtc_ops == NULL) { rtc_ops = ops; @@ -488,7 +489,7 @@ int register_rtc(struct rtc_ops *ops) create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, ops); } - up(&rtc_sem); + mutex_unlock(&rtc_mutex); return ret; } @@ -496,12 +497,12 @@ EXPORT_SYMBOL(register_rtc); void unregister_rtc(struct rtc_ops *rtc) { - down(&rtc_sem); + mutex_lock(&rtc_mutex); if (rtc == rtc_ops) { remove_proc_entry("driver/rtc", NULL); misc_deregister(&rtc_miscdev); rtc_ops = NULL; } - up(&rtc_sem); + mutex_unlock(&rtc_mutex); } EXPORT_SYMBOL(unregister_rtc); diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index dceb826bd216..96fd91926c9b 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -206,7 +207,7 @@ static void ecard_task_readbytes(struct ecard_request *req) static DECLARE_WAIT_QUEUE_HEAD(ecard_wait); static struct ecard_request *ecard_req; -static DECLARE_MUTEX(ecard_sem); +static DEFINE_MUTEX(ecard_mutex); /* * Set up the expansion card daemon's page tables. @@ -299,7 +300,7 @@ static void ecard_call(struct ecard_request *req) req->complete = &completion; - down(&ecard_sem); + mutex_lock(&ecard_mutex); ecard_req = req; wake_up(&ecard_wait); @@ -307,7 +308,7 @@ static void ecard_call(struct ecard_request *req) * Now wait for kecardd to run. */ wait_for_completion(&completion); - up(&ecard_sem); + mutex_unlock(&ecard_mutex); } /* ======================= Mid-level card control ===================== */ diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 1c84c60941e1..74aa7a39bb68 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -16,26 +16,27 @@ #include #include #include +#include #include #include "clock.h" static LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -78,18 +79,18 @@ EXPORT_SYMBOL(clk_set_rate); int clk_register(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_del(&clk->node); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c index 40684e01e865..95a1e263f7fa 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/mach-integrator/clock.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -22,20 +23,20 @@ #include "clock.h" static LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -107,18 +108,18 @@ static struct clk uart_clk = { int clk_register(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_del(&clk->node); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index a68b30eff4d2..93096befd017 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -59,7 +60,7 @@ static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { #endif }; -static DECLARE_MUTEX(sem); +static DEFINE_MUTEX(mutex); static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs) @@ -239,16 +240,16 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) if (port > PXA_SSP_PORTS || port == 0) return -ENODEV; - down(&sem); + mutex_lock(&mutex); if (use_count[port - 1]) { - up(&sem); + mutex_unlock(&mutex); return -EBUSY; } use_count[port - 1]++; if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) { use_count[port - 1]--; - up(&sem); + mutex_unlock(&mutex); return -EBUSY; } dev->port = port; @@ -265,13 +266,13 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) /* turn on SSP port clock */ pxa_set_cken(ssp_info[port-1].clock, 1); - up(&sem); + mutex_unlock(&mutex); return 0; out_region: release_mem_region(__PREG(SSCR0_P(port)), 0x2c); use_count[port - 1]--; - up(&sem); + mutex_unlock(&mutex); return ret; } @@ -282,7 +283,7 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - down(&sem); + mutex_lock(&mutex); SSCR0_P(dev->port) &= ~SSCR0_SSE; if (dev->port > PXA_SSP_PORTS || dev->port == 0) { @@ -295,7 +296,7 @@ void ssp_exit(struct ssp_dev *dev) free_irq(dev->irq, dev); release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); use_count[dev->port - 1]--; - up(&sem); + mutex_unlock(&mutex); } EXPORT_SYMBOL(ssp_write_word); diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index ec3f7e798623..21325a4da9da 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -21,20 +22,20 @@ #include "clock.h" static LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -109,18 +110,18 @@ static struct clk mmci_clk = { int clk_register(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_del(&clk->node); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index fc09ba92d66a..af2f3d52b61b 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -51,7 +52,7 @@ /* clock information */ static LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); /* old functions */ @@ -102,7 +103,7 @@ struct clk *clk_get(struct device *dev, const char *id) else idno = to_platform_device(dev)->id; - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, list) { if (p->id == idno && @@ -126,7 +127,7 @@ struct clk *clk_get(struct device *dev, const char *id) } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -362,9 +363,9 @@ int s3c24xx_register_clock(struct clk *clk) /* add to the list of available clocks */ - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->list, &clocks); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index dcf10014f5cd..9858c96560e2 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -22,20 +23,20 @@ #include "clock.h" static LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -110,18 +111,18 @@ static struct clk mmci_clk = { int clk_register(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_del(&clk->node); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 84fd65656fcf..7ebc5a29db8d 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -27,7 +28,7 @@ #include LIST_HEAD(clocks); -static DECLARE_MUTEX(clocks_sem); +static DEFINE_MUTEX(clocks_mutex); DEFINE_SPINLOCK(clockfw_lock); static struct clk_functions *arch_clock; @@ -40,14 +41,14 @@ struct clk * clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return clk; } @@ -249,11 +250,11 @@ void propagate_rate(struct clk * tclk) int clk_register(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); if (clk->init) clk->init(clk); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); return 0; } @@ -261,9 +262,9 @@ EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { - down(&clocks_sem); + mutex_lock(&clocks_mutex); list_del(&clk->node); - up(&clocks_sem); + mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister);