i2c: mux: mellanox: add driver
This driver allows I2C routing controlled through CPLD select registers on a wide range of Mellanox systems (CPLD Lattice device). MUX selection is provided by digital and analog HW. Analog part is not under SW control. Digital part is under CPLD control (channel selection/de-selection). Connectivity schema. .---. .-------------. | l | | |-- i2cx1 -- i2cx8 | i |-- i2cn --+--| mlxcpld mux | | n | | | |-- i2cy1 -- i2cy8 | u | | '-------------' | x | | | '---' '---------' i2c-mux-mlxpcld does not necessarily require i2c-mlxcpld. It can be used along with another bus driver, and still control i2c routing through CPLD mux selection, in case the system is equipped with CPLD capable of mux selection control. The Kconfig currently controlling compilation of this code is: drivers/i2c/muxes/Kconfig:config I2C_MUX_MLXCPLD Signed-off-by: Michael Shych <michaelsh@mellanox.com> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
1e98dcd779
commit
c02b7bf532
|
@ -7881,6 +7881,13 @@ W: http://www.mellanox.com
|
|||
Q: http://patchwork.ozlabs.org/project/netdev/list/
|
||||
F: drivers/net/ethernet/mellanox/mlxsw/
|
||||
|
||||
MELLANOX MLXCPLD I2C MUX DRIVER
|
||||
M: Vadim Pasternak <vadimp@mellanox.com>
|
||||
M: Michael Shych <michaelsh@mellanox.com>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/i2c/muxes/i2c-mux-mlxcpld.c
|
||||
|
||||
MELLANOX MLXCPLD LED DRIVER
|
||||
M: Vadim Pasternak <vadimp@mellanox.com>
|
||||
L: linux-leds@vger.kernel.org
|
||||
|
|
|
@ -81,4 +81,15 @@ config I2C_DEMUX_PINCTRL
|
|||
demultiplexer that uses the pinctrl subsystem. This is useful if you
|
||||
want to change the I2C master at run-time depending on features.
|
||||
|
||||
config I2C_MUX_MLXCPLD
|
||||
tristate "Mellanox CPLD based I2C multiplexer"
|
||||
help
|
||||
If you say yes to this option, support will be included for a
|
||||
CPLD based I2C multiplexer. This driver provides access to
|
||||
I2C busses connected through a MUX, which is controlled
|
||||
by a CPLD register.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-mux-mlxcpld.
|
||||
|
||||
endmenu
|
||||
|
|
|
@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o
|
|||
obj-$(CONFIG_I2C_DEMUX_PINCTRL) += i2c-demux-pinctrl.o
|
||||
|
||||
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
|
||||
obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
|
||||
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
|
||||
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
|
||||
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
|
||||
|
|
220
drivers/i2c/muxes/i2c-mux-mlxcpld.c
Normal file
220
drivers/i2c/muxes/i2c-mux-mlxcpld.c
Normal file
|
@ -0,0 +1,220 @@
|
|||
/*
|
||||
* drivers/i2c/muxes/i2c-mux-mlxcpld.c
|
||||
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
|
||||
* Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the names of the copyright holders nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* Alternatively, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") version 2 as published by the Free
|
||||
* Software Foundation.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-mux.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/version.h>
|
||||
#include <linux/i2c/mlxcpld.h>
|
||||
|
||||
#define CPLD_MUX_MAX_NCHANS 8
|
||||
|
||||
/* mlxcpld_mux - mux control structure:
|
||||
* @last_chan - last register value
|
||||
* @client - I2C device client
|
||||
*/
|
||||
struct mlxcpld_mux {
|
||||
u8 last_chan;
|
||||
struct i2c_client *client;
|
||||
};
|
||||
|
||||
/* MUX logic description.
|
||||
* Driver can support different mux control logic, according to CPLD
|
||||
* implementation.
|
||||
*
|
||||
* Connectivity schema.
|
||||
*
|
||||
* i2c-mlxcpld Digital Analog
|
||||
* driver
|
||||
* *--------* * -> mux1 (virt bus2) -> mux -> |
|
||||
* | I2CLPC | i2c physical * -> mux2 (virt bus3) -> mux -> |
|
||||
* | bridge | bus 1 *---------* |
|
||||
* | logic |---------------------> * mux reg * |
|
||||
* | in CPLD| *---------* |
|
||||
* *--------* i2c-mux-mlxpcld ^ * -> muxn (virt busn) -> mux -> |
|
||||
* | driver | |
|
||||
* | *---------------* | Devices
|
||||
* | * CPLD (i2c bus)* select |
|
||||
* | * registers for *--------*
|
||||
* | * mux selection * deselect
|
||||
* | *---------------*
|
||||
* | |
|
||||
* <--------> <----------->
|
||||
* i2c cntrl Board cntrl reg
|
||||
* reg space space (mux select,
|
||||
* IO, LED, WD, info)
|
||||
*
|
||||
*/
|
||||
|
||||
static const struct i2c_device_id mlxcpld_mux_id[] = {
|
||||
{ "mlxcpld_mux_module", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mlxcpld_mux_id);
|
||||
|
||||
/* Write to mux register. Don't use i2c_transfer() and i2c_smbus_xfer()
|
||||
* for this as they will try to lock adapter a second time.
|
||||
*/
|
||||
static int mlxcpld_mux_reg_write(struct i2c_adapter *adap,
|
||||
struct i2c_client *client, u8 val)
|
||||
{
|
||||
struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
|
||||
|
||||
if (adap->algo->master_xfer) {
|
||||
struct i2c_msg msg;
|
||||
u8 msgbuf[] = {pdata->sel_reg_addr, val};
|
||||
|
||||
msg.addr = client->addr;
|
||||
msg.flags = 0;
|
||||
msg.len = 2;
|
||||
msg.buf = msgbuf;
|
||||
return __i2c_transfer(adap, &msg, 1);
|
||||
} else if (adap->algo->smbus_xfer) {
|
||||
union i2c_smbus_data data;
|
||||
|
||||
data.byte = val;
|
||||
return adap->algo->smbus_xfer(adap, client->addr,
|
||||
client->flags, I2C_SMBUS_WRITE,
|
||||
pdata->sel_reg_addr,
|
||||
I2C_SMBUS_BYTE_DATA, &data);
|
||||
} else
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static int mlxcpld_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
|
||||
{
|
||||
struct mlxcpld_mux *data = i2c_mux_priv(muxc);
|
||||
struct i2c_client *client = data->client;
|
||||
u8 regval = chan + 1;
|
||||
int err = 0;
|
||||
|
||||
/* Only select the channel if its different from the last channel */
|
||||
if (data->last_chan != regval) {
|
||||
err = mlxcpld_mux_reg_write(muxc->parent, client, regval);
|
||||
if (err)
|
||||
data->last_chan = 0;
|
||||
else
|
||||
data->last_chan = regval;
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int mlxcpld_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
|
||||
{
|
||||
struct mlxcpld_mux *data = i2c_mux_priv(muxc);
|
||||
struct i2c_client *client = data->client;
|
||||
|
||||
/* Deselect active channel */
|
||||
data->last_chan = 0;
|
||||
|
||||
return mlxcpld_mux_reg_write(muxc->parent, client, data->last_chan);
|
||||
}
|
||||
|
||||
/* Probe/reomove functions */
|
||||
static int mlxcpld_mux_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
|
||||
struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
|
||||
struct i2c_mux_core *muxc;
|
||||
int num, force;
|
||||
struct mlxcpld_mux *data;
|
||||
int err;
|
||||
|
||||
if (!pdata)
|
||||
return -EINVAL;
|
||||
|
||||
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
muxc = i2c_mux_alloc(adap, &client->dev, CPLD_MUX_MAX_NCHANS,
|
||||
sizeof(*data), 0, mlxcpld_mux_select_chan,
|
||||
mlxcpld_mux_deselect);
|
||||
if (!muxc)
|
||||
return -ENOMEM;
|
||||
|
||||
data = i2c_mux_priv(muxc);
|
||||
i2c_set_clientdata(client, muxc);
|
||||
data->client = client;
|
||||
data->last_chan = 0; /* force the first selection */
|
||||
|
||||
/* Create an adapter for each channel. */
|
||||
for (num = 0; num < CPLD_MUX_MAX_NCHANS; num++) {
|
||||
if (num >= pdata->num_adaps)
|
||||
/* discard unconfigured channels */
|
||||
break;
|
||||
|
||||
force = pdata->adap_ids[num];
|
||||
|
||||
err = i2c_mux_add_adapter(muxc, force, num, 0);
|
||||
if (err)
|
||||
goto virt_reg_failed;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
virt_reg_failed:
|
||||
i2c_mux_del_adapters(muxc);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int mlxcpld_mux_remove(struct i2c_client *client)
|
||||
{
|
||||
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
|
||||
|
||||
i2c_mux_del_adapters(muxc);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver mlxcpld_mux_driver = {
|
||||
.driver = {
|
||||
.name = "mlxcpld-mux",
|
||||
},
|
||||
.probe = mlxcpld_mux_probe,
|
||||
.remove = mlxcpld_mux_remove,
|
||||
.id_table = mlxcpld_mux_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(mlxcpld_mux_driver);
|
||||
|
||||
MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
|
||||
MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
|
||||
MODULE_LICENSE("Dual BSD/GPL");
|
||||
MODULE_ALIAS("platform:i2c-mux-mlxcpld");
|
52
include/linux/i2c/mlxcpld.h
Normal file
52
include/linux/i2c/mlxcpld.h
Normal file
|
@ -0,0 +1,52 @@
|
|||
/*
|
||||
* mlxcpld.h - Mellanox I2C multiplexer support in CPLD
|
||||
*
|
||||
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
|
||||
* Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the names of the copyright holders nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* Alternatively, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") version 2 as published by the Free
|
||||
* Software Foundation.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#ifndef _LINUX_I2C_MLXCPLD_H
|
||||
#define _LINUX_I2C_MLXCPLD_H
|
||||
|
||||
/* Platform data for the CPLD I2C multiplexers */
|
||||
|
||||
/* mlxcpld_mux_plat_data - per mux data, used with i2c_register_board_info
|
||||
* @adap_ids - adapter array
|
||||
* @num_adaps - number of adapters
|
||||
* @sel_reg_addr - mux select register offset in CPLD space
|
||||
*/
|
||||
struct mlxcpld_mux_plat_data {
|
||||
int *adap_ids;
|
||||
int num_adaps;
|
||||
int sel_reg_addr;
|
||||
};
|
||||
|
||||
#endif /* _LINUX_I2C_MLXCPLD_H */
|
Loading…
Reference in a new issue