USB: usb-storage: merge DPCM support into SDDR09

The DPCM subdriver is a little peculiar, in that it's meant to support
devices where LUN 0 is Compact Flash and uses the CB transport whereas
LUN 1 is SmartMedia and uses the SDDR09 transport.  Thus DPCM isn't
really a transport in itself; it's more like a demultiplexer.

Much of the DPCM code is part of the SDDR09 subdriver already, and the
remaining part is fairly small.  This patch (as1182) moves that extra
piece into sddr09.c, thereby eliminating dpcm.c.  Also eliminated is
the Kconfig entry for DPCM support; it is now listed as part of the
SDDR09 entry.

In order to make sure that the semantics are the same as before, each
unusual_devs entry for DPCM is now present twice: once with DPCM
support if SDDR09 is configured (as before), and once with the
SINGLE_LUN flag and CB support otherwise.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Alan Stern 2008-12-01 10:36:15 -05:00 committed by Greg Kroah-Hartman
parent f1632df36b
commit c20b15fde5
8 changed files with 70 additions and 135 deletions

View file

@ -61,13 +61,6 @@ config USB_STORAGE_ISD200
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
config USB_STORAGE_DPCM
bool "Microtech/ZiO! CompactFlash/SmartMedia support"
depends on USB_STORAGE
help
Say Y here to support the Microtech/ZiO! CompactFlash reader.
There is a web page at <http://www.ziocorp.com/products/>.
config USB_STORAGE_USBAT
bool "USBAT/USBAT02-based storage support"
depends on USB_STORAGE
@ -90,12 +83,12 @@ config USB_STORAGE_USBAT
- Sandisk ImageMate SDDR-05b
config USB_STORAGE_SDDR09
bool "SanDisk SDDR-09 (and other SmartMedia) support"
bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
Also works for the Microtech Zio! SmartMedia reader.
Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
config USB_STORAGE_SDDR55
bool "SanDisk SDDR-55 SmartMedia support"

View file

@ -14,7 +14,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o
usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09) += sddr09.o
usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o
usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o

View file

@ -1,86 +0,0 @@
/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
*
* DPCM driver v0.1:
*
* First release
*
* Current development and maintenance by:
* (c) 2000 Brian Webb (webbb@earthlink.net)
*
* This device contains both a CompactFlash card reader, which
* uses the Control/Bulk w/o Interrupt protocol and
* a SmartMedia card reader that uses the same protocol
* as the SDDR09.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include "usb.h"
#include "transport.h"
#include "protocol.h"
#include "debug.h"
#include "dpcm.h"
#include "sddr09.h"
/*
* Transport for the Microtech DPCM-USB
*
*/
int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
{
int ret;
if (srb == NULL)
return USB_STOR_TRANSPORT_ERROR;
US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
switch (srb->device->lun) {
case 0:
/*
* LUN 0 corresponds to the CompactFlash card reader.
*/
ret = usb_stor_CB_transport(srb, us);
break;
#ifdef CONFIG_USB_STORAGE_SDDR09
case 1:
/*
* LUN 1 corresponds to the SmartMedia card reader.
*/
/*
* Set the LUN to 0 (just in case).
*/
srb->device->lun = 0; us->srb->device->lun = 0;
ret = sddr09_transport(srb, us);
srb->device->lun = 1; us->srb->device->lun = 1;
break;
#endif
default:
US_DEBUGP("dpcm_transport: Invalid LUN %d\n", srb->device->lun);
ret = USB_STOR_TRANSPORT_ERROR;
break;
}
return ret;
}

View file

@ -1,32 +0,0 @@
/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
*
* DPCM driver v0.1:
*
* First release
*
* Current development and maintenance by:
* (c) 2000 Brian Webb (webbb@earthlink.net)
*
* See dpcm.c for more explanation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _MICROTECH_DPCM_USB_H
#define _MICROTECH_DPCM_USB_H
extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
#endif

View file

@ -45,6 +45,7 @@
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include "usb.h"
#include "transport.h"
@ -1445,6 +1446,48 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
return 0; /* not result */
}
/*
* Transport for the Microtech DPCM-USB
*/
int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
{
int ret;
US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
switch (srb->device->lun) {
case 0:
/*
* LUN 0 corresponds to the CompactFlash card reader.
*/
ret = usb_stor_CB_transport(srb, us);
break;
case 1:
/*
* LUN 1 corresponds to the SmartMedia card reader.
*/
/*
* Set the LUN to 0 (just in case).
*/
srb->device->lun = 0;
ret = sddr09_transport(srb, us);
srb->device->lun = 1;
break;
default:
US_DEBUGP("dpcm_transport: Invalid LUN %d\n",
srb->device->lun);
ret = USB_STOR_TRANSPORT_ERROR;
break;
}
return ret;
}
/*
* Transport for the Sandisk SDDR-09
*/

View file

@ -28,8 +28,11 @@
/* Sandisk SDDR-09 stuff */
extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
extern int usb_stor_sddr09_init(struct us_data *us);
/* Microtech DPCM-USB stuff */
extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
#endif

View file

@ -296,11 +296,17 @@ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
#ifdef CONFIG_USB_STORAGE_DPCM
#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#else
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#endif
/* Patch submitted by Daniel Drake <dsd@gentoo.org>
@ -601,6 +607,12 @@ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
0),
#else
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB CompactFlash Adapter",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN),
#endif
/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
@ -1175,11 +1187,17 @@ UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
#ifdef CONFIG_USB_STORAGE_DPCM
#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#else
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#endif
#ifdef CONFIG_USB_STORAGE_ALAUDA

View file

@ -75,9 +75,6 @@
#ifdef CONFIG_USB_STORAGE_SDDR55
#include "sddr55.h"
#endif
#ifdef CONFIG_USB_STORAGE_DPCM
#include "dpcm.h"
#endif
#ifdef CONFIG_USB_STORAGE_FREECOM
#include "freecom.h"
#endif