ALSA: hda/realtek - Remove leftover static quirks for ALC260
Now we can clean up all static quirks for ALC260. Also many codes in alc_quirks.c can be ripped off since they have been used only by ALC260 static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Takashi Iwai
parent
c29b3f6dd7
commit
c3c2c9e7ff
|
|
@ -29,11 +29,7 @@ ALC880
|
|||
|
||||
ALC260
|
||||
======
|
||||
basic fixed pin assignment (old default model)
|
||||
test for testing/debugging purpose, almost all controls can
|
||||
adjusted. Appearing only when compiled with
|
||||
$CONFIG_SND_DEBUG=y
|
||||
auto auto-config reading BIOS (default)
|
||||
N/A
|
||||
|
||||
ALC262
|
||||
======
|
||||
|
|
|
|||
|
|
@ -1,432 +0,0 @@
|
|||
/*
|
||||
* ALC260 quirk models
|
||||
* included by patch_realtek.c
|
||||
*/
|
||||
|
||||
/* ALC260 models */
|
||||
enum {
|
||||
ALC260_AUTO,
|
||||
ALC260_BASIC,
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
ALC260_TEST,
|
||||
#endif
|
||||
ALC260_MODEL_LAST /* last tag */
|
||||
};
|
||||
|
||||
static const hda_nid_t alc260_dac_nids[1] = {
|
||||
/* front */
|
||||
0x02,
|
||||
};
|
||||
|
||||
static const hda_nid_t alc260_adc_nids[1] = {
|
||||
/* ADC0 */
|
||||
0x04,
|
||||
};
|
||||
|
||||
static const hda_nid_t alc260_adc_nids_alt[1] = {
|
||||
/* ADC1 */
|
||||
0x05,
|
||||
};
|
||||
|
||||
/* NIDs used when simultaneous access to both ADCs makes sense. Note that
|
||||
* alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
|
||||
*/
|
||||
static const hda_nid_t alc260_dual_adc_nids[2] = {
|
||||
/* ADC0, ADC1 */
|
||||
0x04, 0x05
|
||||
};
|
||||
|
||||
#define ALC260_DIGOUT_NID 0x03
|
||||
#define ALC260_DIGIN_NID 0x06
|
||||
|
||||
static const struct hda_input_mux alc260_capture_source = {
|
||||
.num_items = 4,
|
||||
.items = {
|
||||
{ "Mic", 0x0 },
|
||||
{ "Front Mic", 0x1 },
|
||||
{ "Line", 0x2 },
|
||||
{ "CD", 0x4 },
|
||||
},
|
||||
};
|
||||
|
||||
/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
|
||||
* the Fujitsu S702x, but jacks are marked differently.
|
||||
*/
|
||||
static const struct hda_input_mux alc260_acer_capture_sources[2] = {
|
||||
{
|
||||
.num_items = 4,
|
||||
.items = {
|
||||
{ "Mic", 0x0 },
|
||||
{ "Line", 0x2 },
|
||||
{ "CD", 0x4 },
|
||||
{ "Headphone", 0x5 },
|
||||
},
|
||||
},
|
||||
{
|
||||
.num_items = 5,
|
||||
.items = {
|
||||
{ "Mic", 0x0 },
|
||||
{ "Line", 0x2 },
|
||||
{ "CD", 0x4 },
|
||||
{ "Headphone", 0x6 },
|
||||
{ "Mixer", 0x5 },
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* This is just place-holder, so there's something for alc_build_pcms to look
|
||||
* at when it calculates the maximum number of channels. ALC260 has no mixer
|
||||
* element which allows changing the channel mode, so the verb list is
|
||||
* never used.
|
||||
*/
|
||||
static const struct hda_channel_mode alc260_modes[1] = {
|
||||
{ 2, NULL },
|
||||
};
|
||||
|
||||
|
||||
/* Mixer combinations
|
||||
*
|
||||
* basic: base_output + input + pc_beep + capture
|
||||
* fujitsu: fujitsu + capture
|
||||
* acer: acer + capture
|
||||
*/
|
||||
|
||||
static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
|
||||
HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
|
||||
HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
|
||||
HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
|
||||
HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
|
||||
{ } /* end */
|
||||
};
|
||||
|
||||
static const struct snd_kcontrol_new alc260_input_mixer[] = {
|
||||
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
|
||||
{ } /* end */
|
||||
};
|
||||
|
||||
/*
|
||||
* initialization verbs
|
||||
*/
|
||||
static const struct hda_verb alc260_init_verbs[] = {
|
||||
/* Line In pin widget for input */
|
||||
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
|
||||
/* CD pin widget for input */
|
||||
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
|
||||
/* Mic1 (rear panel) pin widget for input and vref at 80% */
|
||||
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
|
||||
/* Mic2 (front panel) pin widget for input and vref at 80% */
|
||||
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
|
||||
/* LINE-2 is used for line-out in rear */
|
||||
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
/* select line-out */
|
||||
{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
|
||||
/* LINE-OUT pin */
|
||||
{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
/* enable HP */
|
||||
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
|
||||
/* enable Mono */
|
||||
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
/* mute capture amp left and right */
|
||||
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
|
||||
/* set connection select to line in (default select for this ADC) */
|
||||
{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
|
||||
/* mute capture amp left and right */
|
||||
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
|
||||
/* set connection select to line in (default select for this ADC) */
|
||||
{0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
|
||||
/* set vol=0 Line-Out mixer amp left and right */
|
||||
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
|
||||
/* unmute pin widget amp left and right (no gain on this amp) */
|
||||
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
/* set vol=0 HP mixer amp left and right */
|
||||
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
|
||||
/* unmute pin widget amp left and right (no gain on this amp) */
|
||||
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
/* set vol=0 Mono mixer amp left and right */
|
||||
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
|
||||
/* unmute pin widget amp left and right (no gain on this amp) */
|
||||
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
/* unmute LINE-2 out pin */
|
||||
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
|
||||
* Line In 2 = 0x03
|
||||
*/
|
||||
/* mute analog inputs */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
|
||||
/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
|
||||
/* mute Front out path */
|
||||
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
/* mute Headphone out path */
|
||||
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
/* mute Mono out path */
|
||||
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
{ }
|
||||
};
|
||||
|
||||
static const struct hda_verb alc260_hp_dc7600_verbs[] = {
|
||||
{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
|
||||
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
|
||||
{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
|
||||
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
|
||||
{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
|
||||
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
|
||||
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
|
||||
{}
|
||||
};
|
||||
|
||||
/* Test configuration for debugging, modelled after the ALC880 test
|
||||
* configuration.
|
||||
*/
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
static const hda_nid_t alc260_test_dac_nids[1] = {
|
||||
0x02,
|
||||
};
|
||||
static const hda_nid_t alc260_test_adc_nids[2] = {
|
||||
0x04, 0x05,
|
||||
};
|
||||
/* For testing the ALC260, each input MUX needs its own definition since
|
||||
* the signal assignments are different. This assumes that the first ADC
|
||||
* is NID 0x04.
|
||||
*/
|
||||
static const struct hda_input_mux alc260_test_capture_sources[2] = {
|
||||
{
|
||||
.num_items = 7,
|
||||
.items = {
|
||||
{ "MIC1 pin", 0x0 },
|
||||
{ "MIC2 pin", 0x1 },
|
||||
{ "LINE1 pin", 0x2 },
|
||||
{ "LINE2 pin", 0x3 },
|
||||
{ "CD pin", 0x4 },
|
||||
{ "LINE-OUT pin", 0x5 },
|
||||
{ "HP-OUT pin", 0x6 },
|
||||
},
|
||||
},
|
||||
{
|
||||
.num_items = 8,
|
||||
.items = {
|
||||
{ "MIC1 pin", 0x0 },
|
||||
{ "MIC2 pin", 0x1 },
|
||||
{ "LINE1 pin", 0x2 },
|
||||
{ "LINE2 pin", 0x3 },
|
||||
{ "CD pin", 0x4 },
|
||||
{ "Mixer", 0x5 },
|
||||
{ "LINE-OUT pin", 0x6 },
|
||||
{ "HP-OUT pin", 0x7 },
|
||||
},
|
||||
},
|
||||
};
|
||||
static const struct snd_kcontrol_new alc260_test_mixer[] = {
|
||||
/* Output driver widgets */
|
||||
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
|
||||
HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
|
||||
HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
|
||||
HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
|
||||
|
||||
/* Modes for retasking pin widgets
|
||||
* Note: the ALC260 doesn't seem to act on requests to enable mic
|
||||
* bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't
|
||||
* mention this restriction. At this stage it's not clear whether
|
||||
* this behaviour is intentional or is a hardware bug in chip
|
||||
* revisions available at least up until early 2006. Therefore for
|
||||
* now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
|
||||
* choices, but if it turns out that the lack of mic bias for these
|
||||
* NIDs is intentional we could change their modes from
|
||||
* ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
|
||||
*/
|
||||
ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
|
||||
ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
|
||||
ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
|
||||
ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
|
||||
ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
|
||||
ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
|
||||
|
||||
/* Loopback mixer controls */
|
||||
HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
|
||||
HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
|
||||
HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
|
||||
|
||||
/* Controls for GPIO pins, assuming they are configured as outputs */
|
||||
ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
|
||||
ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
|
||||
ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
|
||||
ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
|
||||
|
||||
/* Switches to allow the digital IO pins to be enabled. The datasheet
|
||||
* is ambigious as to which NID is which; testing on laptops which
|
||||
* make this output available should provide clarification.
|
||||
*/
|
||||
ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
|
||||
ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
|
||||
|
||||
/* A switch allowing EAPD to be enabled. Some laptops seem to use
|
||||
* this output to turn on an external amplifier.
|
||||
*/
|
||||
ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
|
||||
ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
|
||||
|
||||
{ } /* end */
|
||||
};
|
||||
static const struct hda_verb alc260_test_init_verbs[] = {
|
||||
/* Enable all GPIOs as outputs with an initial value of 0 */
|
||||
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
|
||||
{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
|
||||
{0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
|
||||
|
||||
/* Enable retasking pins as output, initially without power amp */
|
||||
{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
|
||||
|
||||
/* Disable digital (SPDIF) pins initially, but users can enable
|
||||
* them via a mixer switch. In the case of SPDIF-out, this initverb
|
||||
* payload also sets the generation to 0, output to be in "consumer"
|
||||
* PCM format, copyright asserted, no pre-emphasis and no validity
|
||||
* control.
|
||||
*/
|
||||
{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
|
||||
{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
|
||||
|
||||
/* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
|
||||
* OUT1 sum bus when acting as an output.
|
||||
*/
|
||||
{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
|
||||
{0x0c, AC_VERB_SET_CONNECT_SEL, 0},
|
||||
{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
|
||||
{0x0e, AC_VERB_SET_CONNECT_SEL, 0},
|
||||
|
||||
/* Start with output sum widgets muted and their output gains at min */
|
||||
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
|
||||
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
|
||||
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
|
||||
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
|
||||
|
||||
/* Unmute retasking pin widget output buffers since the default
|
||||
* state appears to be output. As the pin mode is changed by the
|
||||
* user the pin mode control will take care of enabling the pin's
|
||||
* input/output buffers as needed.
|
||||
*/
|
||||
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
/* Also unmute the mono-out pin widget */
|
||||
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
|
||||
|
||||
/* Mute capture amp left and right */
|
||||
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
/* Set ADC connection select to match default mixer setting (mic1
|
||||
* pin)
|
||||
*/
|
||||
{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
|
||||
|
||||
/* Do the same for the second ADC: mute capture input amp and
|
||||
* set ADC connection to mic1 pin
|
||||
*/
|
||||
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
|
||||
{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
|
||||
|
||||
/* Mute all inputs to mixer widget (even unconnected ones) */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
|
||||
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
|
||||
|
||||
{ }
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* ALC260 configurations
|
||||
*/
|
||||
static const char * const alc260_models[ALC260_MODEL_LAST] = {
|
||||
[ALC260_BASIC] = "basic",
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
[ALC260_TEST] = "test",
|
||||
#endif
|
||||
[ALC260_AUTO] = "auto",
|
||||
};
|
||||
|
||||
static const struct snd_pci_quirk alc260_cfg_tbl[] = {
|
||||
SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
|
||||
SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
|
||||
SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
|
||||
SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
|
||||
{}
|
||||
};
|
||||
|
||||
static const struct alc_config_preset alc260_presets[] = {
|
||||
[ALC260_BASIC] = {
|
||||
.mixers = { alc260_base_output_mixer,
|
||||
alc260_input_mixer },
|
||||
.init_verbs = { alc260_init_verbs },
|
||||
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
|
||||
.dac_nids = alc260_dac_nids,
|
||||
.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
|
||||
.adc_nids = alc260_dual_adc_nids,
|
||||
.num_channel_mode = ARRAY_SIZE(alc260_modes),
|
||||
.channel_mode = alc260_modes,
|
||||
.input_mux = &alc260_capture_source,
|
||||
},
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
[ALC260_TEST] = {
|
||||
.mixers = { alc260_test_mixer },
|
||||
.init_verbs = { alc260_test_init_verbs },
|
||||
.num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
|
||||
.dac_nids = alc260_test_dac_nids,
|
||||
.num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
|
||||
.adc_nids = alc260_test_adc_nids,
|
||||
.num_channel_mode = ARRAY_SIZE(alc260_modes),
|
||||
.channel_mode = alc260_modes,
|
||||
.num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
|
||||
.input_mux = alc260_test_capture_sources,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
|
|
@ -74,307 +74,6 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
|
|||
return err;
|
||||
}
|
||||
|
||||
/*
|
||||
* Control the mode of pin widget settings via the mixer. "pc" is used
|
||||
* instead of "%" to avoid consequences of accidentally treating the % as
|
||||
* being part of a format specifier. Maximum allowed length of a value is
|
||||
* 63 characters plus NULL terminator.
|
||||
*
|
||||
* Note: some retasking pin complexes seem to ignore requests for input
|
||||
* states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
|
||||
* are requested. Therefore order this list so that this behaviour will not
|
||||
* cause problems when mixer clients move through the enum sequentially.
|
||||
* NIDs 0x0f and 0x10 have been observed to have this behaviour as of
|
||||
* March 2006.
|
||||
*/
|
||||
static const char * const alc_pin_mode_names[] = {
|
||||
"Mic 50pc bias", "Mic 80pc bias",
|
||||
"Line in", "Line out", "Headphone out",
|
||||
};
|
||||
static const unsigned char alc_pin_mode_values[] = {
|
||||
PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
|
||||
};
|
||||
/* The control can present all 5 options, or it can limit the options based
|
||||
* in the pin being assumed to be exclusively an input or an output pin. In
|
||||
* addition, "input" pins may or may not process the mic bias option
|
||||
* depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to
|
||||
* accept requests for bias as of chip versions up to March 2006) and/or
|
||||
* wiring in the computer.
|
||||
*/
|
||||
#define ALC_PIN_DIR_IN 0x00
|
||||
#define ALC_PIN_DIR_OUT 0x01
|
||||
#define ALC_PIN_DIR_INOUT 0x02
|
||||
#define ALC_PIN_DIR_IN_NOMICBIAS 0x03
|
||||
#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04
|
||||
|
||||
/* Info about the pin modes supported by the different pin direction modes.
|
||||
* For each direction the minimum and maximum values are given.
|
||||
*/
|
||||
static const signed char alc_pin_mode_dir_info[5][2] = {
|
||||
{ 0, 2 }, /* ALC_PIN_DIR_IN */
|
||||
{ 3, 4 }, /* ALC_PIN_DIR_OUT */
|
||||
{ 0, 4 }, /* ALC_PIN_DIR_INOUT */
|
||||
{ 2, 2 }, /* ALC_PIN_DIR_IN_NOMICBIAS */
|
||||
{ 2, 4 }, /* ALC_PIN_DIR_INOUT_NOMICBIAS */
|
||||
};
|
||||
#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
|
||||
#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
|
||||
#define alc_pin_mode_n_items(_dir) \
|
||||
(alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
|
||||
|
||||
static int alc_pin_mode_info(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_info *uinfo)
|
||||
{
|
||||
unsigned int item_num = uinfo->value.enumerated.item;
|
||||
unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
|
||||
|
||||
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
||||
uinfo->count = 1;
|
||||
uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
|
||||
|
||||
if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
|
||||
item_num = alc_pin_mode_min(dir);
|
||||
strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int alc_pin_mode_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
unsigned int i;
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
|
||||
long *valp = ucontrol->value.integer.value;
|
||||
unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_PIN_WIDGET_CONTROL,
|
||||
0x00);
|
||||
|
||||
/* Find enumerated value for current pinctl setting */
|
||||
i = alc_pin_mode_min(dir);
|
||||
while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
|
||||
i++;
|
||||
*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int alc_pin_mode_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
signed int change;
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
|
||||
long val = *ucontrol->value.integer.value;
|
||||
unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_PIN_WIDGET_CONTROL,
|
||||
0x00);
|
||||
|
||||
if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
|
||||
val = alc_pin_mode_min(dir);
|
||||
|
||||
change = pinctl != alc_pin_mode_values[val];
|
||||
if (change) {
|
||||
/* Set pin mode to that requested */
|
||||
snd_hda_codec_write_cache(codec, nid, 0,
|
||||
AC_VERB_SET_PIN_WIDGET_CONTROL,
|
||||
alc_pin_mode_values[val]);
|
||||
|
||||
/* Also enable the retasking pin's input/output as required
|
||||
* for the requested pin mode. Enum values of 2 or less are
|
||||
* input modes.
|
||||
*
|
||||
* Dynamically switching the input/output buffers probably
|
||||
* reduces noise slightly (particularly on input) so we'll
|
||||
* do it. However, having both input and output buffers
|
||||
* enabled simultaneously doesn't seem to be problematic if
|
||||
* this turns out to be necessary in the future.
|
||||
*/
|
||||
if (val <= 2) {
|
||||
snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
|
||||
HDA_AMP_MUTE, HDA_AMP_MUTE);
|
||||
snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
|
||||
HDA_AMP_MUTE, 0);
|
||||
} else {
|
||||
snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
|
||||
HDA_AMP_MUTE, HDA_AMP_MUTE);
|
||||
snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
|
||||
HDA_AMP_MUTE, 0);
|
||||
}
|
||||
}
|
||||
return change;
|
||||
}
|
||||
|
||||
#define ALC_PIN_MODE(xname, nid, dir) \
|
||||
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
|
||||
.subdevice = HDA_SUBDEV_NID_FLAG | nid, \
|
||||
.info = alc_pin_mode_info, \
|
||||
.get = alc_pin_mode_get, \
|
||||
.put = alc_pin_mode_put, \
|
||||
.private_value = nid | (dir<<16) }
|
||||
|
||||
/* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged
|
||||
* together using a mask with more than one bit set. This control is
|
||||
* currently used only by the ALC260 test model. At this stage they are not
|
||||
* needed for any "production" models.
|
||||
*/
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define alc_gpio_data_info snd_ctl_boolean_mono_info
|
||||
|
||||
static int alc_gpio_data_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
long *valp = ucontrol->value.integer.value;
|
||||
unsigned int val = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_GPIO_DATA, 0x00);
|
||||
|
||||
*valp = (val & mask) != 0;
|
||||
return 0;
|
||||
}
|
||||
static int alc_gpio_data_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
signed int change;
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
long val = *ucontrol->value.integer.value;
|
||||
unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_GPIO_DATA,
|
||||
0x00);
|
||||
|
||||
/* Set/unset the masked GPIO bit(s) as needed */
|
||||
change = (val == 0 ? 0 : mask) != (gpio_data & mask);
|
||||
if (val == 0)
|
||||
gpio_data &= ~mask;
|
||||
else
|
||||
gpio_data |= mask;
|
||||
snd_hda_codec_write_cache(codec, nid, 0,
|
||||
AC_VERB_SET_GPIO_DATA, gpio_data);
|
||||
|
||||
return change;
|
||||
}
|
||||
#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
|
||||
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
|
||||
.subdevice = HDA_SUBDEV_NID_FLAG | nid, \
|
||||
.info = alc_gpio_data_info, \
|
||||
.get = alc_gpio_data_get, \
|
||||
.put = alc_gpio_data_put, \
|
||||
.private_value = nid | (mask<<16) }
|
||||
#endif /* CONFIG_SND_DEBUG */
|
||||
|
||||
/* A switch control to allow the enabling of the digital IO pins on the
|
||||
* ALC260. This is incredibly simplistic; the intention of this control is
|
||||
* to provide something in the test model allowing digital outputs to be
|
||||
* identified if present. If models are found which can utilise these
|
||||
* outputs a more complete mixer control can be devised for those models if
|
||||
* necessary.
|
||||
*/
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define alc_spdif_ctrl_info snd_ctl_boolean_mono_info
|
||||
|
||||
static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
long *valp = ucontrol->value.integer.value;
|
||||
unsigned int val = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_DIGI_CONVERT_1, 0x00);
|
||||
|
||||
*valp = (val & mask) != 0;
|
||||
return 0;
|
||||
}
|
||||
static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
signed int change;
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
long val = *ucontrol->value.integer.value;
|
||||
unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_DIGI_CONVERT_1,
|
||||
0x00);
|
||||
|
||||
/* Set/unset the masked control bit(s) as needed */
|
||||
change = (val == 0 ? 0 : mask) != (ctrl_data & mask);
|
||||
if (val==0)
|
||||
ctrl_data &= ~mask;
|
||||
else
|
||||
ctrl_data |= mask;
|
||||
snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
|
||||
ctrl_data);
|
||||
|
||||
return change;
|
||||
}
|
||||
#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
|
||||
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
|
||||
.subdevice = HDA_SUBDEV_NID_FLAG | nid, \
|
||||
.info = alc_spdif_ctrl_info, \
|
||||
.get = alc_spdif_ctrl_get, \
|
||||
.put = alc_spdif_ctrl_put, \
|
||||
.private_value = nid | (mask<<16) }
|
||||
#endif /* CONFIG_SND_DEBUG */
|
||||
|
||||
/* A switch control to allow the enabling EAPD digital outputs on the ALC26x.
|
||||
* Again, this is only used in the ALC26x test models to help identify when
|
||||
* the EAPD line must be asserted for features to work.
|
||||
*/
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define alc_eapd_ctrl_info snd_ctl_boolean_mono_info
|
||||
|
||||
static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
long *valp = ucontrol->value.integer.value;
|
||||
unsigned int val = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_EAPD_BTLENABLE, 0x00);
|
||||
|
||||
*valp = (val & mask) != 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
int change;
|
||||
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
||||
hda_nid_t nid = kcontrol->private_value & 0xffff;
|
||||
unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
long val = *ucontrol->value.integer.value;
|
||||
unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_EAPD_BTLENABLE,
|
||||
0x00);
|
||||
|
||||
/* Set/unset the masked control bit(s) as needed */
|
||||
change = (!val ? 0 : mask) != (ctrl_data & mask);
|
||||
if (!val)
|
||||
ctrl_data &= ~mask;
|
||||
else
|
||||
ctrl_data |= mask;
|
||||
snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
|
||||
ctrl_data);
|
||||
|
||||
return change;
|
||||
}
|
||||
|
||||
#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \
|
||||
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
|
||||
.subdevice = HDA_SUBDEV_NID_FLAG | nid, \
|
||||
.info = alc_eapd_ctrl_info, \
|
||||
.get = alc_eapd_ctrl_get, \
|
||||
.put = alc_eapd_ctrl_put, \
|
||||
.private_value = nid | (mask<<16) }
|
||||
#endif /* CONFIG_SND_DEBUG */
|
||||
|
||||
static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec)
|
||||
{
|
||||
struct alc_spec *spec = codec->spec;
|
||||
|
|
|
|||
|
|
@ -4308,14 +4308,10 @@ static const struct snd_pci_quirk alc260_fixup_tbl[] = {
|
|||
|
||||
/*
|
||||
*/
|
||||
#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
|
||||
#include "alc260_quirks.c"
|
||||
#endif
|
||||
|
||||
static int patch_alc260(struct hda_codec *codec)
|
||||
{
|
||||
struct alc_spec *spec;
|
||||
int err, board_config;
|
||||
int err;
|
||||
|
||||
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
|
||||
if (spec == NULL)
|
||||
|
|
@ -4325,38 +4321,13 @@ static int patch_alc260(struct hda_codec *codec)
|
|||
|
||||
spec->mixer_nid = 0x07;
|
||||
|
||||
board_config = alc_board_config(codec, ALC260_MODEL_LAST,
|
||||
alc260_models, alc260_cfg_tbl);
|
||||
if (board_config < 0) {
|
||||
snd_printd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
|
||||
codec->chip_name);
|
||||
board_config = ALC_MODEL_AUTO;
|
||||
}
|
||||
alc_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups);
|
||||
alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
|
||||
|
||||
if (board_config == ALC_MODEL_AUTO) {
|
||||
alc_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups);
|
||||
alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
|
||||
}
|
||||
|
||||
if (board_config == ALC_MODEL_AUTO) {
|
||||
/* automatic parse from the BIOS config */
|
||||
err = alc260_parse_auto_config(codec);
|
||||
if (err < 0)
|
||||
goto error;
|
||||
#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
|
||||
else if (!err) {
|
||||
printk(KERN_INFO
|
||||
"hda_codec: Cannot set up configuration "
|
||||
"from BIOS. Using base mode...\n");
|
||||
board_config = ALC260_BASIC;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
if (board_config != ALC_MODEL_AUTO) {
|
||||
setup_preset(codec, &alc260_presets[board_config]);
|
||||
spec->vmaster_nid = 0x08;
|
||||
}
|
||||
/* automatic parse from the BIOS config */
|
||||
err = alc260_parse_auto_config(codec);
|
||||
if (err < 0)
|
||||
goto error;
|
||||
|
||||
if (!spec->no_analog && !spec->adc_nids) {
|
||||
alc_auto_fill_adc_caps(codec);
|
||||
|
|
@ -4377,10 +4348,7 @@ static int patch_alc260(struct hda_codec *codec)
|
|||
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
|
||||
|
||||
codec->patch_ops = alc_patch_ops;
|
||||
if (board_config == ALC_MODEL_AUTO)
|
||||
spec->init_hook = alc_auto_init_std;
|
||||
else
|
||||
codec->patch_ops.build_controls = __alc_build_controls;
|
||||
spec->init_hook = alc_auto_init_std;
|
||||
spec->shutup = alc_eapd_shutup;
|
||||
#ifdef CONFIG_SND_HDA_POWER_SAVE
|
||||
if (!spec->loopback.amplist)
|
||||
|
|
|
|||
Loading…
Reference in a new issue