From c4ad72560df11961d3e57fb0fadfe88a9863c9ad Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 8 Sep 2016 10:48:38 +0200 Subject: [PATCH] ARM: dts: fix RealView EB SMSC ethernet version The ethernet version in the earlier RealView EB variants is LAN91C111 and not LAN9118 according to ARM DUI 0303E "RealView Emulation Baseboard User Guide" page 3-57. Make sure that this is used for the base variant of the board. As the DT bindings for LAN91C111 does not specify any power supplies, these need to be deleted from the DTS file. Fixes: 2440d29d2ae2 ("ARM: dts: realview: support all the RealView EB board variants") Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-eb.dtsi | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 1c6a040218e3..e2e9599596e2 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -51,14 +51,6 @@ regulator-boot-on; }; - veth: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "veth"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -134,16 +126,15 @@ bank-width = <4>; }; - /* SMSC 9118 ethernet with PHY and EEPROM */ + /* SMSC LAN91C111 ethernet with PHY and EEPROM */ ethernet: ethernet@4e000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; + compatible = "smsc,lan91c111"; reg = <0x4e000000 0x10000>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&veth>; - vddvario-supply = <&veth>; + /* + * This means the adapter can be accessed with 8, 16 or + * 32 bit reads/writes. + */ + reg-io-width = <7>; }; usb: usb@4f000000 {