redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

DT changes for 4.10:

Browse source 
- Many additions for sama5d2
  - few non urgent fixes for sam9260ek, sama5d4 and sama5d2
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJYKf3QAAoJENiigzvaE+LCQXEP/j/NldTvf9GVnG5rKitQ4Yxi
 NROzWUM2dEPAN0GFsIQX7g1nIAHp/+ZxaWWE94a6Jc2N5bIrDIPyl8lVtD0rEiV2
 gxV79lWESEOSdlCszBYP93Zk4zvzX8hn9BSR48E3otWrVoVJT+u5MLkChdEyrk6N
 cbeudrq3+5SNz+TSYaLH21Fcj+BcOMMIwJnsiH2+RhzbPTrvWvblAfdupfsnAzwB
 eOqrA9Clvab939nzUAwWzkdeB7g63J8jxNksbLAt1dvIPYNOKP6Znc+zGMLxNFzP
 LHNoT9QY6wzN6Wti10JU8abJ1qtTtoQreUUir1eXNuH5exoPfplUyVYDXbs8gRHA
 dS/rwFjcOVg0UrkZQ2bM5lxgyPZbjoE5i2iS6CN43du9VSShRzMq11qmq6AAGeT1
 782M28HN0tWvWnFnuxYvg2YW4xdWEVyO8QGJ7j3XdIbHTN8yd2sa+qfLdnNgxYVr
 NKV+6ftKLoZDbeV2dGCU7kQtJBz8AWh01X/5VVSjDZuHO51f2xoQev8BI6cog713
 k9bz5Lh31USfwRE78vKrBubFLfMSfFSw7wc7BI8fP8kpFgqK6ntCnnQOHtHf2w5w
 ZtF+tEPkdy60eqakWgx+Q7XhYGVocHHQ0o6Jgke+hE3C5RNJIJw1qTY9Ly3LjuPd
 bIvJQeCOmZuhFamwJyxF
 =60OR
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.10-dt1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT changes for 4.10:

 - Many additions for sama5d2
 - few non urgent fixes for sam9260ek, sama5d4 and sama5d2

* tag 'at91-ab-4.10-dt1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: replace gpio-key,wakeup with wakeup-source for sam9260ek
  ARM: dts: at91: sama5d2: Add securam node
  ARM: dts: at91: sama5d2: Add secumod node
  ARM: dts: at91: sama5d2: use correct sckc compatible
  ARM: dts: at91: sama5d4: use proper sckc compatible
  ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on tx
  dt-bindings: usb: atmel: fix a couple of copy-paste style typos
  ARM: dts: at91: sama5d2: enable FIFOs for high-speed i2c controllers
  ARM: dts: at91: sama5d4: Add new MA5D4EVK manufacturer compat

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2016-11-18 09:53:28 -08:00
parent 964971c8a3 b662a9dd8a
commit c60c41e8c0
15 changed files with 60 additions and 76 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Documentation/devicetree/bindings/usb/atmel-usb.txt
View file

@ -6,9 +6,9 @@ Required properties:
- compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
used in host mode.
- reg: Address and length of the register set for the device
- interrupts: Should contain ehci interrupt
- interrupts: Should contain ohci interrupt
- clocks: Should reference the peripheral, host and system clocks
- clock-names: Should contains two strings
- clock-names: Should contain three strings
"ohci_clk" for the peripheral clock
"hclk" for the host clock
"uhpck" for the system clock
@ -35,7 +35,7 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain ehci interrupt
- clocks: Should reference the peripheral and the UTMI clocks
- clock-names: Should contains two strings
- clock-names: Should contain two strings
"ehci_clk" for the peripheral clock
"usb_clk" for the UTMI clock
@ -58,7 +58,7 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
- clocks: Should reference the peripheral and the AHB clocks
- clock-names: Should contains two strings
- clock-names: Should contain two strings
"pclk" for the peripheral clock
"hclk" for the AHB clock
@ -85,7 +85,7 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- clocks: Should reference the peripheral and host clocks
- clock-names: Should contains two strings
- clock-names: Should contain two strings
"pclk" for the peripheral clock
"hclk" for the host clock
- ep childnode: To specify the number of endpoints and their properties.

4
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
View file

@ -12,8 +12,8 @@
#include "sama5d4.dtsi"
/ {
model = "DENX MA5D4";
compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
model = "Aries/DENX MA5D4";
compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
memory {
reg = <0x20000000 0x10000000>;

4
arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
View file

@ -13,8 +13,8 @@
#include "at91-sama5d4_ma5d4.dtsi"
/ {
model = "DENX MA5D4EVK";
compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
model = "Aries/DENX MA5D4EVK";
compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
chosen {
stdout-path = "serial3:115200n8";

4
arch/arm/boot/dts/at91rm9200.dtsi
View file

@ -481,8 +481,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9260.dtsi
View file

@ -412,8 +412,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */
<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9260ek.dts
View file

@ -174,14 +174,14 @@
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
gpio-key,wakeup;
wakeup-source;
};
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
gpio-key,wakeup;
wakeup-source;
};
};

4
arch/arm/boot/dts/at91sam9261.dtsi
View file

@ -302,8 +302,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9263.dtsi
View file

@ -412,8 +412,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */
AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */
<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9g45.dtsi
View file

@ -478,8 +478,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9n12.dtsi
View file

@ -500,8 +500,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9rl.dtsi
View file

@ -438,8 +438,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

4
arch/arm/boot/dts/at91sam9x5.dtsi
View file

@ -460,8 +460,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

47
arch/arm/boot/dts/sama5d2.dtsi
View file

@ -735,6 +735,11 @@
atmel,clk-output-range = <0 83000000>;
};
securam_clk: securam_clk {
#clock-cells = <0>;
reg = <51>;
};
i2s0_clk: i2s0_clk {
#clock-cells = <0>;
reg = <54>;
@ -1030,6 +1035,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
atmel,fifo-size = <16>;
status = "disabled";
};
@ -1058,6 +1064,15 @@
status = "disabled";
};
securam: sram@f8044000 {
compatible = "atmel,sama5d2-securam", "mmio-sram";
reg = <0xf8044000 0x1420>;
clocks = <&securam_clk>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xf8044000 0x1420>;
};
rstc@f8048000 {
compatible = "atmel,sama5d3-rstc";
reg = <0xf8048000 0x10>;
@ -1088,30 +1103,12 @@
status = "disabled";
};
sckc@f8048050 {
compatible = "atmel,at91sam9x5-sckc";
clk32k: sckc@f8048050 {
compatible = "atmel,sama5d4-sckc";
reg = <0xf8048050 0x4>;
slow_rc_osc: slow_rc_osc {
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-accuracy = <250000000>;
atmel,startup-time-usec = <75>;
};
slow_osc: slow_osc {
compatible = "atmel,at91sam9x5-clk-slow-osc";
#clock-cells = <0>;
clocks = <&slow_xtal>;
atmel,startup-time-usec = <1200000>;
};
clk32k: slowck {
compatible = "atmel,at91sam9x5-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc &slow_osc>;
};
clocks = <&slow_xtal>;
#clock-cells = <0>;
};
rtc@f80480b0 {
@ -1231,6 +1228,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi1_clk>;
atmel,fifo-size = <16>;
status = "disabled";
};
@ -1260,6 +1258,11 @@
clocks = <&pioA_clk>;
};
secumod@fc040000 {
compatible = "atmel,sama5d2-secumod", "syscon";
reg = <0xfc040000 0x100>;
};
tdes@fc044000 {
compatible = "atmel,at91sam9g46-tdes";
reg = <0xfc044000 0x100>;

4
arch/arm/boot/dts/sama5d3.dtsi
View file

@ -549,8 +549,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */
AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */
<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};

31
arch/arm/boot/dts/sama5d4.dtsi
View file

@ -1314,30 +1314,11 @@
status = "disabled";
};
sckc@fc068650 {
compatible = "atmel,at91sam9x5-sckc";
clk32k: sckc@fc068650 {
compatible = "atmel,sama5d4-sckc";
reg = <0xfc068650 0x4>;
slow_rc_osc: slow_rc_osc {
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-accuracy = <250000000>;
atmel,startup-time-usec = <75>;
};
slow_osc: slow_osc {
compatible = "atmel,at91sam9x5-clk-slow-osc";
#clock-cells = <0>;
clocks = <&slow_xtal>;
atmel,startup-time-usec = <1200000>;
};
clk32k: slowck {
compatible = "atmel,at91sam9x5-clk-slow";
#clock-cells = <0>;
clocks = <&slow_rc_osc &slow_osc>;
};
#clock-cells = <0>;
clocks = <&slow_xtal>;
};
rtc@fc0686b0 {
@ -1461,8 +1442,8 @@
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */
<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */
<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with D14 and TDI */
AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with D15 and TDO */
};
};