ASoC: tse850: document axentia,tse850-pcm5142 bindings
The TSE-850 is an FM Transmitter Station Equipment, designed to generate baseband signals for FM, mainly the DARC subcarrier, but other signals are also possible. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
a85787edaa
commit
c821d30148
|
@ -0,0 +1,88 @@
|
|||
Devicetree bindings for the Axentia TSE-850 audio complex
|
||||
|
||||
Required properties:
|
||||
- compatible: "axentia,tse850-pcm5142"
|
||||
- axentia,ssc-controller: The phandle of the atmel SSC controller used as
|
||||
cpu dai.
|
||||
- axentia,audio-codec: The phandle of the PCM5142 codec.
|
||||
- axentia,add-gpios: gpio specifier that controls the mixer.
|
||||
- axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
|
||||
- axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
|
||||
- axentia,ana-supply: Regulator that supplies the output amplifier. Must
|
||||
support voltages in the 2V - 20V range, in 1V steps.
|
||||
|
||||
The schematics explaining the gpios are as follows:
|
||||
|
||||
loop1 relays
|
||||
IN1 +---o +------------+ o---+ OUT1
|
||||
\ /
|
||||
+ +
|
||||
| / |
|
||||
+--o +--. |
|
||||
| add | |
|
||||
| V |
|
||||
| .---. |
|
||||
DAC +----------->|Sum|---+
|
||||
| '---' |
|
||||
| |
|
||||
+ +
|
||||
|
||||
IN2 +---o--+------------+--o---+ OUT2
|
||||
loop2 relays
|
||||
|
||||
The 'loop1' gpio pin controlls two relays, which are either in loop position,
|
||||
meaning that input and output are directly connected, or they are in mixer
|
||||
position, meaning that the signal is passed through the 'Sum' mixer. Similarly
|
||||
for 'loop2'.
|
||||
|
||||
In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
|
||||
(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
|
||||
are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
|
||||
are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
|
||||
the PCM5142 codec.
|
||||
|
||||
Example:
|
||||
|
||||
&i2c {
|
||||
codec: pcm5142@4c {
|
||||
compatible = "ti,pcm5142";
|
||||
|
||||
reg = <0x4c>;
|
||||
|
||||
AVDD-supply = <®_3v3>;
|
||||
DVDD-supply = <®_3v3>;
|
||||
CPVDD-supply = <®_3v3>;
|
||||
|
||||
clocks = <&sck>;
|
||||
|
||||
pll-in = <3>;
|
||||
pll-out = <6>;
|
||||
};
|
||||
};
|
||||
|
||||
ana: ana-reg {
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "ANA";
|
||||
|
||||
pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
|
||||
pwm-dutycycle-unit = <1000>;
|
||||
pwm-dutycycle-range = <100 1000>;
|
||||
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <20000000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "axentia,tse850-pcm5142";
|
||||
|
||||
axentia,ssc-controller = <&ssc0>;
|
||||
axentia,audio-codec = <&codec>;
|
||||
|
||||
axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
|
||||
axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||||
axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
|
||||
|
||||
axentia,ana-supply = <&ana>;
|
||||
};
|
|
@ -2317,6 +2317,12 @@ F: include/uapi/linux/ax25.h
|
|||
F: include/net/ax25.h
|
||||
F: net/ax25/
|
||||
|
||||
AXENTIA ASOC DRIVERS
|
||||
M: Peter Rosin <peda@axentia.se>
|
||||
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/sound/axentia,*
|
||||
|
||||
AZ6007 DVB DRIVER
|
||||
M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
||||
M: Mauro Carvalho Chehab <mchehab@kernel.org>
|
||||
|
|
Loading…
Reference in a new issue