From a17b9e4c9c5e9c4da4385908af0377af11529266 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 18 Oct 2016 13:42:09 +0800 Subject: [PATCH 1/2] clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent On the A31, the DMA engine only works if AHB1 is clocked from PLL6. In addition, the hstimer is clocked from AHB1, and if AHB1 is clocked from the CPU clock, and cpufreq is working, we get an unstable timer. Force the AHB1 clock to use PLL6 as its parent. Previously this was done in the device tree with the assigned-clocks and assigned-clocks-parent bindings. However with this new monolithic driver, the system critical clocks aren't exported through the device tree. The alternative is to force this setting in the driver before the clocks are registered. This is also done in newer versions of mainline U-boot. But people still using an older version, or even the vendor version, can still hit this issue. Hence the need to do it in the kernel as well. Reported-by: Hans de Goede Reported-by: Maxime Ripard Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c index 79596463e0d9..4a82a49cff5e 100644 --- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c @@ -191,6 +191,8 @@ static struct clk_div_table axi_div_table[] = { static SUNXI_CCU_DIV_TABLE(axi_clk, "axi", "cpu", 0x050, 0, 3, axi_div_table, 0); +#define SUN6I_A31_AHB1_REG 0x054 + static const char * const ahb1_parents[] = { "osc32k", "osc24M", "axi", "pll-periph" }; @@ -1230,6 +1232,16 @@ static void __init sun6i_a31_ccu_setup(struct device_node *node) val &= BIT(16); writel(val, reg + SUN6I_A31_PLL_MIPI_REG); + /* Force AHB1 to PLL6 / 3 */ + val = readl(reg + SUN6I_A31_AHB1_REG); + /* set PLL6 pre-div = 3 */ + val &= ~GENMASK(7, 6); + val |= 0x2 << 6; + /* select PLL6 / pre-div */ + val &= ~GENMASK(13, 12); + val |= 0x3 << 12; + writel(val, reg + SUN6I_A31_AHB1_REG); + sunxi_ccu_probe(node, reg, &sun6i_a31_ccu_desc); ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk, From ac95330b96376550ae7a533d1396272d675adfa2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?St=C3=A9phan=20Rafin?= Date: Fri, 4 Nov 2016 00:53:56 +0100 Subject: [PATCH 2/2] clk: sunxi: Fix M factor computation for APB1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit cfa636886033 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") introduced a regression for m factor computation in sun4i_get_apb1_factors function. The old code reassigned the "parent_rate" parameter to the targeted divisor value and was buggy for the returned frequency but not for the computed factors. Now, returned frequency is good but m factor is incorrectly computed (its max value 31 is always set resulting in a significantly slower frequency than the requested one...) This patch simply restores the original proper computation for m while keeping the good changes for returned rate. Fixes: cfa636886033 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") Signed-off-by: Stéphan Rafin Signed-off-by: Maxime Ripard --- drivers/clk/sunxi/clk-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 838b22aa8b67..f2c9274b8bd5 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -373,7 +373,7 @@ static void sun4i_get_apb1_factors(struct factors_request *req) else calcp = 3; - calcm = (req->parent_rate >> calcp) - 1; + calcm = (div >> calcp) - 1; req->rate = (req->parent_rate >> calcp) / (calcm + 1); req->m = calcm;