Pull d-states into release branch

Conflicts:

	drivers/acpi/sleep/main.c

Signed-off-by: Len Brown <len.brown@intel.com>
This commit is contained in:
Len Brown 2007-07-25 01:36:31 -04:00
commit cb3e0c107b
8 changed files with 181 additions and 42 deletions

View file

@ -34,35 +34,55 @@ static u32 acpi_suspend_states[] = {
static int init_8259A_after_S1;
/**
* acpi_pm_prepare - Do preliminary suspend work.
* @pm_state: suspend state we're entering.
*
* Make sure we support the state. If we do, and we need it, set the
* firmware waking vector and do arch-specific nastiness to get the
* wakeup code to the waking vector.
*/
extern int acpi_sleep_prepare(u32 acpi_state);
extern void acpi_power_off(void);
static int acpi_pm_prepare(suspend_state_t pm_state)
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/**
* acpi_pm_set_target - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
static int acpi_pm_set_target(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
if (!sleep_states[acpi_state]) {
printk("acpi_pm_prepare does not support %d \n", pm_state);
return -EPERM;
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
error = -ENOSYS;
}
return acpi_sleep_prepare(acpi_state);
return error;
}
/**
* acpi_pm_prepare - Do preliminary suspend work.
* @pm_state: ignored
*
* If necessary, set the firmware waking vector and do arch-specific
* nastiness to get the wakeup code to the waking vector.
*/
static int acpi_pm_prepare(suspend_state_t pm_state)
{
int error = acpi_sleep_prepare(acpi_target_sleep_state);
if (error)
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
/**
* acpi_pm_enter - Actually enter a sleep state.
* @pm_state: State we're entering.
* @pm_state: ignored
*
* Flush caches and go to sleep. For STR or STD, we have to call
* arch-specific assembly, which in turn call acpi_enter_sleep_state().
* Flush caches and go to sleep. For STR we have to call arch-specific
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
@ -70,31 +90,31 @@ static int acpi_pm_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
unsigned long flags = 0;
u32 acpi_state = acpi_suspend_states[pm_state];
u32 acpi_state = acpi_target_sleep_state;
ACPI_FLUSH_CPU_CACHE();
/* Do arch specific saving of state. */
if (pm_state > PM_SUSPEND_STANDBY) {
if (acpi_state == ACPI_STATE_S3) {
int error = acpi_save_state_mem();
if (error)
if (error) {
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
}
local_irq_save(flags);
acpi_enable_wakeup_device(acpi_state);
switch (pm_state) {
case PM_SUSPEND_STANDBY:
switch (acpi_state) {
case ACPI_STATE_S1:
barrier();
status = acpi_enter_sleep_state(acpi_state);
break;
case PM_SUSPEND_MEM:
case ACPI_STATE_S3:
do_suspend_lowlevel();
break;
default:
return -EINVAL;
}
/* ACPI 3.0 specs (P62) says that it's the responsabilty
@ -107,12 +127,8 @@ static int acpi_pm_enter(suspend_state_t pm_state)
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
/* restore processor state
* We should only be here if we're coming back from STR or STD.
* And, in the case of the latter, the memory image should have already
* been loaded from disk.
*/
if (pm_state > PM_SUSPEND_STANDBY)
/* restore processor state */
if (acpi_state == ACPI_STATE_S3)
acpi_restore_state_mem();
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
@ -120,7 +136,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
/**
* acpi_pm_finish - Finish up suspend sequence.
* @pm_state: State we're coming out of.
* @pm_state: ignored
*
* This is called after we wake back up (or if entering the sleep state
* failed).
@ -128,7 +144,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
static int acpi_pm_finish(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
u32 acpi_state = acpi_target_sleep_state;
acpi_leave_sleep_state(acpi_state);
acpi_disable_wakeup_device(acpi_state);
@ -136,6 +152,8 @@ static int acpi_pm_finish(suspend_state_t pm_state)
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
printk("Broken toshiba laptop -> kicking interrupts\n");
@ -178,6 +196,7 @@ static int acpi_pm_state_valid(suspend_state_t pm_state)
static struct pm_ops acpi_pm_ops = {
.valid = acpi_pm_state_valid,
.set_target = acpi_pm_set_target,
.prepare = acpi_pm_prepare,
.enter = acpi_pm_enter,
.finish = acpi_pm_finish,
@ -237,6 +256,81 @@ static struct hibernation_ops acpi_hibernation_ops = {
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
/**
* acpi_pm_device_sleep_state - return preferred power state of ACPI device
* in the system sleep state given by %acpi_target_sleep_state
* @dev: device to examine
* @wake: if set, the device should be able to wake up the system
* @d_min_p: used to store the upper limit of allowed states range
* Return value: preferred power state of the device on success, -ENODEV on
* failure (ie. if there's no 'struct acpi_device' for @dev)
*
* Find the lowest power (highest number) ACPI device power state that
* device @dev can be in while the system is in the sleep state represented
* by %acpi_target_sleep_state. If @wake is nonzero, the device should be
* able to wake up the system from this sleep state. If @d_min_p is set,
* the highest power (lowest number) device power state of @dev allowed
* in this system sleep state is stored at the location pointed to by it.
*
* The caller must ensure that @dev is valid before using this function.
* The caller is also responsible for figuring out if the device is
* supposed to be able to wake up the system and passing this information
* via @wake.
*/
int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
char acpi_method[] = "_SxD";
unsigned long d_min, d_max;
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
printk(KERN_ERR "ACPI handle has no context!\n");
return -ENODEV;
}
acpi_method[2] = '0' + acpi_target_sleep_state;
/*
* If the sleep state is S0, we will return D3, but if the device has
* _S0W, we will use the value from _S0W
*/
d_min = ACPI_STATE_D0;
d_max = ACPI_STATE_D3;
/*
* If present, _SxD methods return the minimum D-state (highest power
* state) we can use for the corresponding S-states. Otherwise, the
* minimum D-state is D0 (ACPI 3.x).
*
* NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
* provided -- that's our fault recovery, we ignore retval.
*/
if (acpi_target_sleep_state > ACPI_STATE_S0)
acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
/*
* If _PRW says we can wake up the system from the target sleep state,
* the D-state returned by _SxD is sufficient for that (we assume a
* wakeup-aware driver if wake is set). Still, if _SxW exists
* (ACPI 3.x), it should return the maximum (lowest power) D-state that
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
(wake && adev->wakeup.state.enabled &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
acpi_method[3] = 'W';
acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
/* Sanity check */
if (d_max < d_min)
d_min = d_max;
}
if (d_min_p)
*d_min_p = d_min;
return d_max;
}
/*
* Toshiba fails to preserve interrupts over S1, reinitialization
* of 8259 is needed after S1 resume.

View file

@ -245,16 +245,33 @@ EXPORT_SYMBOL(pci_osc_control_set);
* currently we simply return _SxD, if present.
*/
static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state)
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
pm_message_t state)
{
/* TBD */
int acpi_state;
return -ENODEV;
acpi_state = acpi_pm_device_sleep_state(&pdev->dev,
device_may_wakeup(&pdev->dev), NULL);
if (acpi_state < 0)
return PCI_POWER_ERROR;
switch (acpi_state) {
case ACPI_STATE_D0:
return PCI_D0;
case ACPI_STATE_D1:
return PCI_D1;
case ACPI_STATE_D2:
return PCI_D2;
case ACPI_STATE_D3:
return PCI_D3hot;
}
return PCI_POWER_ERROR;
}
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
acpi_handle tmp;
static int state_conv[] = {
[0] = 0,
[1] = 1,
@ -266,6 +283,9 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
if (!handle)
return -ENODEV;
/* If the ACPI device has _EJ0, ignore the device */
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
return 0;
return acpi_bus_set_power(handle, acpi_state);
}

View file

@ -499,7 +499,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
/**
* pci_choose_state - Choose the power state of a PCI device
@ -513,15 +513,15 @@ int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
int ret;
pci_power_t ret;
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
if (ret >= 0)
state.event = ret;
if (ret != PCI_POWER_ERROR)
return ret;
}
switch (state.event) {

View file

@ -13,7 +13,7 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t, resource_size_t),
void *alignf_data);
/* Firmware callbacks */
extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);

View file

@ -167,6 +167,8 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state)
return error;
}
if (pnp_dev->protocol && pnp_dev->protocol->suspend)
pnp_dev->protocol->suspend(pnp_dev, state);
return 0;
}
@ -179,6 +181,9 @@ static int pnp_bus_resume(struct device *dev)
if (!pnp_drv)
return 0;
if (pnp_dev->protocol && pnp_dev->protocol->resume)
pnp_dev->protocol->resume(pnp_dev);
if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
error = pnp_start_dev(pnp_dev);
if (error)

View file

@ -119,11 +119,25 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
return ACPI_FAILURE(status) ? -ENODEV : 0;
}
static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
{
return acpi_bus_set_power((acpi_handle)dev->data,
acpi_pm_device_sleep_state(&dev->dev,
device_may_wakeup(&dev->dev), NULL));
}
static int pnpacpi_resume(struct pnp_dev *dev)
{
return acpi_bus_set_power((acpi_handle)dev->data, ACPI_STATE_D0);
}
static struct pnp_protocol pnpacpi_protocol = {
.name = "Plug and Play ACPI",
.get = pnpacpi_get_resources,
.set = pnpacpi_set_resources,
.disable = pnpacpi_disable_resources,
.suspend = pnpacpi_suspend,
.resume = pnpacpi_resume,
};
static int __init pnpacpi_add_device(struct acpi_device *device)

View file

@ -365,6 +365,8 @@ acpi_handle acpi_get_child(acpi_handle, acpi_integer);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
int acpi_pm_device_sleep_state(struct device *, int, int *);
#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/

View file

@ -335,6 +335,10 @@ struct pnp_protocol {
int (*set)(struct pnp_dev *dev, struct pnp_resource_table *res);
int (*disable)(struct pnp_dev *dev);
/* protocol specific suspend/resume */
int (*suspend)(struct pnp_dev *dev, pm_message_t state);
int (*resume)(struct pnp_dev *dev);
/* used by pnp layer only (look but don't touch) */
unsigned char number; /* protocol number*/
struct device dev; /* link to driver model */