hwmon: (scpi) skip unsupported sensors properly

Currently it's assumed that firmware exports only the class of sensors
supported by the driver. However with newer firmware or SCPI protocol
revision, support for newer classes of sensors can be present.

The driver fails to probe with the following warning if an unsupported
class of sensor is encountered in the firmware.

sysfs: cannot create duplicate filename
	'/devices/platform/scpi/scpi:sensors/hwmon/hwmon0/'
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:31
Modules linked in:

CPU: 0 PID: 6 Comm: kworker/u12:0 Not tainted 4.3.0-rc7 #137
Hardware name: ARM Juno development board (r0) (DT)
Workqueue: deferwq deferred_probe_work_func
PC is at sysfs_warn_dup+0x54/0x78
LR is at sysfs_warn_dup+0x54/0x78

This patch fixes the above issue by skipping through the unsupported
class of SCPI sensors.

Fixes: 68acc77a2d ("hwmon: Support thermal zones registration for SCP temperature sensors")
Fixes: ea98b29a05 ("hwmon: Support sensors exported via ARM SCP interface")
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Sudeep Holla 2015-10-28 17:17:31 +00:00 committed by Guenter Roeck
parent d42d5b6f72
commit cef03d7e66

View file

@ -117,7 +117,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
struct scpi_ops *scpi_ops;
struct device *hwdev, *dev = &pdev->dev;
struct scpi_sensors *scpi_sensors;
int ret;
int ret, idx;
scpi_ops = get_scpi_ops();
if (!scpi_ops)
@ -146,8 +146,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
scpi_sensors->scpi_ops = scpi_ops;
for (i = 0; i < nr_sensors; i++) {
struct sensor_data *sensor = &scpi_sensors->data[i];
for (i = 0, idx = 0; i < nr_sensors; i++) {
struct sensor_data *sensor = &scpi_sensors->data[idx];
ret = scpi_ops->sensor_get_info(i, &sensor->info);
if (ret)
@ -183,7 +183,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
num_power++;
break;
default:
break;
continue;
}
sensor->dev_attr_input.attr.mode = S_IRUGO;
@ -194,11 +194,12 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
sensor->dev_attr_label.show = scpi_show_label;
sensor->dev_attr_label.attr.name = sensor->label;
scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
scpi_sensors->attrs[idx << 1] = &sensor->dev_attr_input.attr;
scpi_sensors->attrs[(idx << 1) + 1] = &sensor->dev_attr_label.attr;
sysfs_attr_init(scpi_sensors->attrs[i << 1]);
sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
sysfs_attr_init(scpi_sensors->attrs[idx << 1]);
sysfs_attr_init(scpi_sensors->attrs[(idx << 1) + 1]);
idx++;
}
scpi_sensors->group.attrs = scpi_sensors->attrs;
@ -236,8 +237,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
zone->sensor_id = i;
zone->scpi_sensors = scpi_sensors;
zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
&scpi_sensor_ops);
zone->tzd = thermal_zone_of_sensor_register(dev,
sensor->info.sensor_id, zone, &scpi_sensor_ops);
/*
* The call to thermal_zone_of_sensor_register returns
* an error for sensors that are not associated with