ath9k: Handle ASPM properly

ASPM has to be disabled when BTCOEX is in use, do this properly
by calling the bus-specific ASPM init routine after the
BTCOEX scheme has been determined.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Sujith Manoharan 2012-06-04 16:27:14 +05:30 committed by John W. Linville
parent aaa1ec46b3
commit d09f5f4cfb
3 changed files with 8 additions and 11 deletions

View file

@ -390,14 +390,6 @@ static void ath9k_hw_disablepcie(struct ath_hw *ah)
REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
static void ath9k_hw_aspm_init(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
if (common->bus_ops->aspm_init)
common->bus_ops->aspm_init(common);
}
/* This should work for all families including legacy */
static bool ath9k_hw_chip_test(struct ath_hw *ah)
{
@ -693,9 +685,6 @@ static int __ath9k_hw_init(struct ath_hw *ah)
if (r)
return r;
if (ah->is_pciexpress)
ath9k_hw_aspm_init(ah);
r = ath9k_hw_init_macaddr(ah);
if (r) {
ath_err(common, "Failed to initialize MAC address\n");

View file

@ -597,6 +597,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
ath9k_cmn_init_crypto(sc->sc_ah);
ath9k_init_misc(sc);
if (common->bus_ops->aspm_init)
common->bus_ops->aspm_init(common);
return 0;
err_btcoex:

View file

@ -115,6 +115,9 @@ static void ath_pci_aspm_init(struct ath_common *common)
int pos;
u8 aspm;
if (!ah->is_pciexpress)
return;
pos = pci_pcie_cap(pdev);
if (!pos)
return;
@ -138,6 +141,7 @@ static void ath_pci_aspm_init(struct ath_common *common)
aspm &= ~(PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
pci_write_config_byte(parent, pos + PCI_EXP_LNKCTL, aspm);
ath_info(common, "Disabling ASPM since BTCOEX is enabled\n");
return;
}
@ -147,6 +151,7 @@ static void ath_pci_aspm_init(struct ath_common *common)
ah->aspm_enabled = true;
/* Initialize PCIe PM and SERDES registers. */
ath9k_hw_configpcipowersave(ah, false);
ath_info(common, "ASPM enabled: 0x%x\n", aspm);
}
}