[ALSA] cmipci: Fix obsolete description
Documentation Fixed obsolete description about CMIPCI driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
e6e514fa82
commit
d6e33796b5
|
@ -89,19 +89,22 @@ and use the interleaved 4 channel data.
|
|||
|
||||
There are some control switchs affecting to the speaker connections:
|
||||
|
||||
"Line-In As Rear" - As mentioned above, the line-in jack is used
|
||||
for the rear (3th and 4th channels) output.
|
||||
"Line-In As Bass" - The line-in jack is used for the bass (5th
|
||||
and 6th channels) output.
|
||||
"Mic As Center/LFE" - The mic jack is used for the bass output.
|
||||
If this switch is on, you cannot use a microphone as a capture
|
||||
source, of course.
|
||||
|
||||
"Line-In Mode" - an enum control to change the behavior of line-in
|
||||
jack. Either "Line-In", "Rear Output" or "Bass Output" can
|
||||
be selected. The last item is available only with model 039
|
||||
or newer.
|
||||
When "Rear Output" is chosen, the surround channels 3 and 4
|
||||
are output to line-in jack.
|
||||
"Mic-In Mode" - an enum control to change the behavior of mic-in
|
||||
jack. Either "Mic-In" or "Center/LFE Output" can be
|
||||
selected.
|
||||
When "Center/LFE Output" is chosen, the center and bass
|
||||
channels (channels 5 and 6) are output to mic-in jack.
|
||||
|
||||
Digital I/O
|
||||
-----------
|
||||
|
||||
The CM8x38 provides the excellent SPDIF capability with very chip
|
||||
The CM8x38 provides the excellent SPDIF capability with very cheap
|
||||
price (yes, that's the reason I bought the card :)
|
||||
|
||||
The SPDIF playback and capture are done via the third PCM device
|
||||
|
@ -122,8 +125,9 @@ respectively, so you cannot playback both analog and digital streams
|
|||
simultaneously.
|
||||
|
||||
To enable SPDIF output, you need to turn on "IEC958 Output Switch"
|
||||
control via mixer or alsactl. Then you'll see the red light on from
|
||||
the card so you know that's working obviously :)
|
||||
control via mixer or alsactl ("IEC958" is the official name of
|
||||
so-called S/PDIF). Then you'll see the red light on from the card so
|
||||
you know that's working obviously :)
|
||||
The SPDIF input is always enabled, so you can hear SPDIF input data
|
||||
from line-out with "IEC958 In Monitor" switch at any time (see
|
||||
below).
|
||||
|
@ -205,9 +209,10 @@ In addition to the standard SB mixer, CM8x38 provides more functions.
|
|||
MIDI CONTROLLER
|
||||
---------------
|
||||
|
||||
The MPU401-UART interface is enabled as default only for the first
|
||||
(CMIPCI) card. You need to set module option "midi_port" properly
|
||||
for the 2nd (CMIPCI) card.
|
||||
The MPU401-UART interface is disabled as default. You need to set
|
||||
module option "mpu_port" with a valid I/O port address to enable the
|
||||
MIDI support. The valid I/O ports are 0x300, 0x310, 0x320 and 0x330.
|
||||
Choose the value which doesn't conflict with other cards.
|
||||
|
||||
There is _no_ hardware wavetable function on this chip (except for
|
||||
OPL3 synth below).
|
||||
|
@ -229,9 +234,11 @@ I don't know why..
|
|||
Joystick and Modem
|
||||
------------------
|
||||
|
||||
The joystick and modem should be available by enabling the control
|
||||
switch "Joystick" and "Modem" respectively. But I myself have never
|
||||
tested them yet.
|
||||
The legacy joystick is supported. To enable the joystick support, pass
|
||||
joystick_port=1 module option. The value 1 means the auto-detection.
|
||||
If the auto-detection fails, try to pass the exact I/O address.
|
||||
|
||||
The modem is enabled dynamically via a card control switch "Modem".
|
||||
|
||||
|
||||
Debugging Information
|
||||
|
|
Loading…
Reference in a new issue