redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

ARM: davinci: mmc: derive version information from device name 

Remove specifying mmc controller IP version information via platform
data, instead specify device name so that driver derives it from
platform_device_id table. Also change the clock node name to match
the changed dev_id.
Tested on da850-evm to make sure driver loads without clk_get failures.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
wifi-calibration
Manjunathappa, Prakash 2013-03-28 18:41:59 +05:30 committed by Sekhar Nori
parent bb170e6118
commit d7ca4c755a
19 changed files with 35 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/mach-davinci/board-da830-evm.c
View File

@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = {
.wires = 8,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static inline void da830_evm_init_mmc(void)

2
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -802,7 +802,6 @@ static struct davinci_mmc_config da850_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static const short da850_evm_mmcsd0_pins[] __initconst = {
@ -1372,7 +1371,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = {
.max_freq = 25000000,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_POWER_OFF_CARD,
.version = MMC_CTLR_VERSION_2,
};
static const short da850_wl12xx_pins[] __initconst = {

1
arch/arm/mach-davinci/board-dm355-evm.c
View File

@ -280,7 +280,6 @@ static struct davinci_mmc_config dm355evm_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_1,
};
/* Don't connect anything to J10 unless you're only using USB host

1
arch/arm/mach-davinci/board-dm365-evm.c
View File

@ -253,7 +253,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static void dm365evm_emac_configure(void)

1
arch/arm/mach-davinci/board-dm644x-evm.c
View File

@ -570,7 +570,6 @@ static struct davinci_mmc_config dm6446evm_mmc_config = {
.get_cd = dm6444evm_mmc_get_cd,
.get_ro = dm6444evm_mmc_get_ro,
.wires = 4,
.version = MMC_CTLR_VERSION_1
};
static struct i2c_board_info __initdata i2c_info[] = {

1
arch/arm/mach-davinci/board-neuros-osd2.c
View File

@ -164,7 +164,6 @@ static void __init davinci_ntosd2_map_io(void)
static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
.version = MMC_CTLR_VERSION_1
};

1
arch/arm/mach-davinci/board-omapl138-hawk.c
View File

@ -136,7 +136,6 @@ static struct davinci_mmc_config da850_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static __init void omapl138_hawk_mmc_init(void)

1
arch/arm/mach-davinci/board-tnetv107x-evm.c
View File

@ -85,7 +85,6 @@ static struct davinci_mmc_config mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_1,
};
static const short sdio1_pins[] __initconst = {

2
arch/arm/mach-davinci/da830.c
View File

@ -394,7 +394,7 @@ static struct clk_lookup da830_clks[] = {
CLK(NULL, "tpcc", &tpcc_clk),
CLK(NULL, "tptc0", &tptc0_clk),
CLK(NULL, "tptc1", &tptc1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK("da830-mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),

4
arch/arm/mach-davinci/da850.c
View File

@ -463,8 +463,8 @@ static struct clk_lookup da850_clks[] = {
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "usb11", &usb11_clk),
CLK(NULL, "usb20", &usb20_clk),

4
arch/arm/mach-davinci/devices-da8xx.c
View File

@ -664,7 +664,7 @@ static struct resource da8xx_mmcsd0_resources[] = {
};
static struct platform_device da8xx_mmcsd0_device = {
.name = "davinci_mmc",
.name = "da830-mmc",
.id = 0,
.num_resources = ARRAY_SIZE(da8xx_mmcsd0_resources),
.resource = da8xx_mmcsd0_resources,
@ -701,7 +701,7 @@ static struct resource da850_mmcsd1_resources[] = {
};
static struct platform_device da850_mmcsd1_device = {
.name = "davinci_mmc",
.name = "da830-mmc",
.id = 1,
.num_resources = ARRAY_SIZE(da850_mmcsd1_resources),
.resource = da850_mmcsd1_resources,

4
arch/arm/mach-davinci/devices-tnetv107x.c
View File

@ -218,7 +218,7 @@ static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
static struct platform_device mmc_devices[2] = {
{
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 0,
.dev = {
.dma_mask = &mmc0_dma_mask,
@ -228,7 +228,7 @@ static struct platform_device mmc_devices[2] = {
.resource = mmc0_resources
},
{
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 1,
.dev = {
.dma_mask = &mmc1_dma_mask,

6
arch/arm/mach-davinci/devices.c
View File

@ -150,7 +150,7 @@ static struct resource mmcsd0_resources[] = {
};
static struct platform_device davinci_mmcsd0_device = {
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 0,
.dev = {
.dma_mask = &mmcsd0_dma_mask,
@ -187,7 +187,7 @@ static struct resource mmcsd1_resources[] = {
};
static struct platform_device davinci_mmcsd1_device = {
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 1,
.dev = {
.dma_mask = &mmcsd1_dma_mask,
@ -235,6 +235,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
SZ_4K - 1;
mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
davinci_mmcsd1_device.name = "da830-mmc";
} else
break;
@ -256,6 +257,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
SZ_4K - 1;
mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
davinci_mmcsd0_device.name = "da830-mmc";
} else if (cpu_is_davinci_dm644x()) {
/* REVISIT: should this be in board-init code? */
/* Power-on 3.3V IO cells */

4
arch/arm/mach-davinci/dm355.c
View File

@ -361,8 +361,8 @@ static struct clk_lookup dm355_clks[] = {
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("dm6441-mmc.0", NULL, &mmcsd0_clk),
CLK("dm6441-mmc.1", NULL, &mmcsd1_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("spi_davinci.2", NULL, &spi2_clk),

4
arch/arm/mach-davinci/dm365.c
View File

@ -454,8 +454,8 @@ static struct clk_lookup dm365_clks[] = {
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("spi_davinci.2", NULL, &spi2_clk),

2
arch/arm/mach-davinci/dm644x.c
View File

@ -310,7 +310,7 @@ static struct clk_lookup dm644x_clks[] = {
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
CLK("davinci-mcbsp", NULL, &asp_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK("dm6441-mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "spi", &spi_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK(NULL, "usb", &usb_clk),

4
arch/arm/mach-davinci/tnetv107x.c
View File

@ -272,7 +272,7 @@ static struct clk_lookup clks[] = {
CLK("tnetv107x-keypad.0", NULL, &clk_keypad),
CLK(NULL, "clk_gpio", &clk_gpio),
CLK(NULL, "clk_mdio", &clk_mdio),
CLK("davinci_mmc.0", NULL, &clk_sdio0),
CLK("dm6441-mmc.0", NULL, &clk_sdio0),
CLK(NULL, "uart0", &clk_uart0),
CLK(NULL, "uart1", &clk_uart1),
CLK(NULL, "timer0", &clk_timer0),
@ -292,7 +292,7 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_system", &clk_system),
CLK(NULL, "clk_imcop", &clk_imcop),
CLK(NULL, "clk_spare", &clk_spare),
CLK("davinci_mmc.1", NULL, &clk_sdio1),
CLK("dm6441-mmc.1", NULL, &clk_sdio1),
CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst),
CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst),
CLK(NULL, NULL, NULL),

18
drivers/mmc/host/davinci_mmc.c
View File

@ -1157,6 +1157,18 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host)
mmc_davinci_reset_ctrl(host, 0);
}
static struct platform_device_id davinci_mmc_devtype[] = {
{
.name = "dm6441-mmc",
.driver_data = MMC_CTLR_VERSION_1,
}, {
.name = "da830-mmc",
.driver_data = MMC_CTLR_VERSION_2,
},
{},
};
MODULE_DEVICE_TABLE(platform, davinci_mmc_devtype);
static int __init davinci_mmcsd_probe(struct platform_device *pdev)
{
struct davinci_mmc_config *pdata = pdev->dev.platform_data;
@ -1165,6 +1177,7 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
struct resource *r, *mem = NULL;
int ret = 0, irq = 0;
size_t mem_size;
const struct platform_device_id *id_entry;
/* REVISIT: when we're fully converted, fail if pdata is NULL */
@ -1237,7 +1250,9 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
if (pdata && (pdata->wires == 8))
mmc->caps |= (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA);
host->version = pdata->version;
id_entry = platform_get_device_id(pdev);
if (id_entry)
host->version = id_entry->driver_data;
mmc->ops = &mmc_davinci_ops;
mmc->f_min = 312500;
@ -1408,6 +1423,7 @@ static struct platform_driver davinci_mmcsd_driver = {
.pm = davinci_mmcsd_pm_ops,
},
.remove = __exit_p(davinci_mmcsd_remove),
.id_table = davinci_mmc_devtype,
};
static int __init davinci_mmcsd_init(void)

3
include/linux/platform_data/mmc-davinci.h
View File

@ -23,9 +23,6 @@ struct davinci_mmc_config {
/* any additional host capabilities: OR'd in to mmc->f_caps */
u32 caps;
/* Version of the MMC/SD controller */
u8 version;
/* Number of sg segments */
u8 nr_sg;
};