A complete refurbished series inclunding:
- DT support for the MFD, TSC and ADC driver & platform device support, which has no users, has been killed. - iio_map from last series is gone and replaced by proper nodes in the device tree. - suspend fixes which means correct data structs are taken and no interrupt storm - fifo split which should problem with TSC & ADC beeing used at the same time - The ADC channels are now checked before blindly applied. That means the touch part reads X, Y and Z coordinates and does not mix them up. Same goes for the IIO ADC driver. - The IIO ADC driver now creates files named in_voltageX_raw where X represents the ADC line instead of a number starting at 0. A read from this file can return -EBUSY in case touch is busy and the ADC didn't collect a value. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJRuKbeAAoJEHuW6BYqjPXR7D4QAMCjJsNQiUceUG6mNSXVeSx2 BkRvltixFHEzQTdMyEF4yQ8P3u8fo58R6cThMJ/1dphMKMhDf7rMVGd8wwdKsiCf 1Vz1QrBUI47Pm2upGBEa40UpqeeL6uZc4ENOG1bqpeeUTEfgao3Iefk8pHNQVpOO UE7hj8xrdgJ8Hp4fjdXmjLmlTU6ek+s7BeeqAVsaz/eJZv+kkHPPwoJ9zyAx5sAi KBjO8Fch38jcU8rKGl8iZUAn8skGVckJnsljys6RP+1KwqxB7y2jU3uhLgU6ciBc zZl3IpsYrsG0vHTl72DmJrtPu7YIQLiydMyFe+zSiA+dKkzI3GnxtzRr4SKGTZbj u3wk8JbQCh3K2LW9gaHFOR+0FJMfF3w62MM19XjcfIGow7ZKnHZJJC0HeOLeUW7V TPFu3jFNCqYTMq2shC7VaUNI6fYiswtAuXLzEQJ0PBaeRMamyrdXyq3EB71zMCJ6 BWW1ifz3R/Xusv7g1QYQpaLJCfD+bu+zWK1LbWO9knkLYZFJahnicmkJiImQPL8t 3aH+quz+hmgZg6Agvf0EVf9y4sFCtJD0qsFeL+SlZxL/vJNnjiGPTzIMP078j61m RzQ3XYOq0AvhXBcU9+dHTM/UsmIM7mE8lz9W7NHnvE9NUuT4z6VE6w9p75YgtSTW yDHv8csxNba5XKi3JfH0 =VGdP -----END PGP SIGNATURE----- Merge tag 'am335x_tsc-adc' of git://breakpoint.cc/bigeasy/linux A complete refurbished series inclunding: - DT support for the MFD, TSC and ADC driver & platform device support, which has no users, has been killed. - iio_map from last series is gone and replaced by proper nodes in the device tree. - suspend fixes which means correct data structs are taken and no interrupt storm - fifo split which should problem with TSC & ADC beeing used at the same time - The ADC channels are now checked before blindly applied. That means the touch part reads X, Y and Z coordinates and does not mix them up. Same goes for the IIO ADC driver. - The IIO ADC driver now creates files named in_voltageX_raw where X represents the ADC line instead of a number starting at 0. A read from this file can return -EBUSY in case touch is busy and the ADC didn't collect a value.
This commit is contained in:
Samuel Ortiz
commit
d8c5d658f4
|
|
@ -0,0 +1,44 @@
|
|||
* TI - TSC ADC (Touschscreen and analog digital converter)
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Required properties:
|
||||
- child "tsc"
|
||||
ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
|
||||
support on the platform.
|
||||
ti,x-plate-resistance: X plate resistance
|
||||
ti,coordiante-readouts: The sequencer supports a total of 16
|
||||
programmable steps each step is used to
|
||||
read a single coordinate. A single
|
||||
readout is enough but multiple reads can
|
||||
increase the quality.
|
||||
A value of 5 means, 5 reads for X, 5 for
|
||||
Y and 2 for Z (always). This utilises 12
|
||||
of the 16 software steps available. The
|
||||
remaining 4 can be used by the ADC.
|
||||
ti,wire-config: Different boards could have a different order for
|
||||
connecting wires on touchscreen. We need to provide an
|
||||
8 bit number where in the 1st four bits represent the
|
||||
analog lines and the next 4 bits represent positive/
|
||||
negative terminal on that input line. Notations to
|
||||
represent the input lines and terminals resoectively
|
||||
is as follows:
|
||||
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
|
||||
XP = 0, XN = 1, YP = 2, YN = 3.
|
||||
- child "adc"
|
||||
ti,adc-channels: List of analog inputs available for ADC.
|
||||
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
|
||||
|
||||
Example:
|
||||
tscadc: tscadc@44e0d000 {
|
||||
compatible = "ti,am3359-tscadc";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,coordiante-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <4 5 6 7>;
|
||||
};
|
||||
}
|
||||
|
|
@ -244,3 +244,17 @@
|
|||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,coordiante-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <4 5 6 7>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -404,6 +404,24 @@
|
|||
ti,hwmods = "wkup_m3";
|
||||
};
|
||||
|
||||
tscadc: tscadc@44e0d000 {
|
||||
compatible = "ti,am3359-tscadc";
|
||||
reg = <0x44e0d000 0x1000>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <16>;
|
||||
ti,hwmods = "adc_tsc";
|
||||
status = "disabled";
|
||||
|
||||
tsc {
|
||||
compatible = "ti,am3359-tsc";
|
||||
};
|
||||
am335x_adc: adc {
|
||||
#io-channel-cells = <1>;
|
||||
compatible = "ti,am3359-adc";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gpmc: gpmc@50000000 {
|
||||
compatible = "ti,am3352-gpmc";
|
||||
ti,hwmods = "gpmc";
|
||||
|
|
|
|||
|
|
@ -22,13 +22,18 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/iio/machine.h>
|
||||
#include <linux/iio/driver.h>
|
||||
|
||||
#include <linux/mfd/ti_am335x_tscadc.h>
|
||||
#include <linux/platform_data/ti_am335x_adc.h>
|
||||
|
||||
struct tiadc_device {
|
||||
struct ti_tscadc_dev *mfd_tscadc;
|
||||
int channels;
|
||||
u8 channel_line[8];
|
||||
u8 channel_step[8];
|
||||
};
|
||||
|
||||
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
|
||||
|
|
@ -42,10 +47,20 @@ static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
|
|||
writel(val, adc->mfd_tscadc->tscadc_base + reg);
|
||||
}
|
||||
|
||||
static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
|
||||
{
|
||||
u32 step_en;
|
||||
|
||||
step_en = ((1 << adc_dev->channels) - 1);
|
||||
step_en <<= TOTAL_STEPS - adc_dev->channels + 1;
|
||||
return step_en;
|
||||
}
|
||||
|
||||
static void tiadc_step_config(struct tiadc_device *adc_dev)
|
||||
{
|
||||
unsigned int stepconfig;
|
||||
int i, channels = 0, steps;
|
||||
int i, steps;
|
||||
u32 step_en;
|
||||
|
||||
/*
|
||||
* There are 16 configurable steps and 8 analog input
|
||||
|
|
@ -58,43 +73,63 @@ static void tiadc_step_config(struct tiadc_device *adc_dev)
|
|||
*/
|
||||
|
||||
steps = TOTAL_STEPS - adc_dev->channels;
|
||||
channels = TOTAL_CHANNELS - adc_dev->channels;
|
||||
|
||||
stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
|
||||
|
||||
for (i = (steps + 1); i <= TOTAL_STEPS; i++) {
|
||||
tiadc_writel(adc_dev, REG_STEPCONFIG(i),
|
||||
stepconfig | STEPCONFIG_INP(channels));
|
||||
tiadc_writel(adc_dev, REG_STEPDELAY(i),
|
||||
for (i = 0; i < adc_dev->channels; i++) {
|
||||
int chan;
|
||||
|
||||
chan = adc_dev->channel_line[i];
|
||||
tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
|
||||
stepconfig | STEPCONFIG_INP(chan));
|
||||
tiadc_writel(adc_dev, REG_STEPDELAY(steps),
|
||||
STEPCONFIG_OPENDLY);
|
||||
channels++;
|
||||
adc_dev->channel_step[i] = steps;
|
||||
steps++;
|
||||
}
|
||||
tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
|
||||
step_en = get_adc_step_mask(adc_dev);
|
||||
am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
|
||||
}
|
||||
|
||||
static const char * const chan_name_ain[] = {
|
||||
"AIN0",
|
||||
"AIN1",
|
||||
"AIN2",
|
||||
"AIN3",
|
||||
"AIN4",
|
||||
"AIN5",
|
||||
"AIN6",
|
||||
"AIN7",
|
||||
};
|
||||
|
||||
static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
|
||||
{
|
||||
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
||||
struct iio_chan_spec *chan_array;
|
||||
struct iio_chan_spec *chan;
|
||||
int i;
|
||||
|
||||
indio_dev->num_channels = channels;
|
||||
chan_array = kcalloc(indio_dev->num_channels,
|
||||
chan_array = kcalloc(channels,
|
||||
sizeof(struct iio_chan_spec), GFP_KERNEL);
|
||||
|
||||
if (chan_array == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < (indio_dev->num_channels); i++) {
|
||||
struct iio_chan_spec *chan = chan_array + i;
|
||||
chan = chan_array;
|
||||
for (i = 0; i < channels; i++, chan++) {
|
||||
|
||||
chan->type = IIO_VOLTAGE;
|
||||
chan->indexed = 1;
|
||||
chan->channel = i;
|
||||
chan->channel = adc_dev->channel_line[i];
|
||||
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
|
||||
chan->datasheet_name = chan_name_ain[chan->channel];
|
||||
chan->scan_type.sign = 'u';
|
||||
chan->scan_type.realbits = 12;
|
||||
chan->scan_type.storagebits = 32;
|
||||
}
|
||||
|
||||
indio_dev->channels = chan_array;
|
||||
|
||||
return indio_dev->num_channels;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void tiadc_channels_remove(struct iio_dev *indio_dev)
|
||||
|
|
@ -108,7 +143,9 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
|
|||
{
|
||||
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
||||
int i;
|
||||
unsigned int fifo1count, readx1;
|
||||
unsigned int fifo1count, read;
|
||||
u32 step = UINT_MAX;
|
||||
bool found = false;
|
||||
|
||||
/*
|
||||
* When the sub-system is first enabled,
|
||||
|
|
@ -121,14 +158,26 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
|
|||
* Hence we need to flush out this data.
|
||||
*/
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
|
||||
if (chan->channel == adc_dev->channel_line[i]) {
|
||||
step = adc_dev->channel_step[i];
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (WARN_ON_ONCE(step == UINT_MAX))
|
||||
return -EINVAL;
|
||||
|
||||
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
||||
for (i = 0; i < fifo1count; i++) {
|
||||
readx1 = tiadc_readl(adc_dev, REG_FIFO1);
|
||||
if (i == chan->channel)
|
||||
*val = readx1 & 0xfff;
|
||||
read = tiadc_readl(adc_dev, REG_FIFO1);
|
||||
if (read >> 16 == step) {
|
||||
*val = read & 0xfff;
|
||||
found = true;
|
||||
}
|
||||
}
|
||||
tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
|
||||
|
||||
am335x_tsc_se_update(adc_dev->mfd_tscadc);
|
||||
if (found == false)
|
||||
return -EBUSY;
|
||||
return IIO_VAL_INT;
|
||||
}
|
||||
|
||||
|
|
@ -140,13 +189,15 @@ static int tiadc_probe(struct platform_device *pdev)
|
|||
{
|
||||
struct iio_dev *indio_dev;
|
||||
struct tiadc_device *adc_dev;
|
||||
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
|
||||
struct mfd_tscadc_board *pdata;
|
||||
struct device_node *node = pdev->dev.of_node;
|
||||
struct property *prop;
|
||||
const __be32 *cur;
|
||||
int err;
|
||||
u32 val;
|
||||
int channels = 0;
|
||||
|
||||
pdata = tscadc_dev->dev->platform_data;
|
||||
if (!pdata || !pdata->adc_init) {
|
||||
dev_err(&pdev->dev, "Could not find platform data\n");
|
||||
if (!node) {
|
||||
dev_err(&pdev->dev, "Could not find valid DT data.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
|
@ -158,8 +209,13 @@ static int tiadc_probe(struct platform_device *pdev)
|
|||
}
|
||||
adc_dev = iio_priv(indio_dev);
|
||||
|
||||
adc_dev->mfd_tscadc = tscadc_dev;
|
||||
adc_dev->channels = pdata->adc_init->adc_channels;
|
||||
adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);
|
||||
|
||||
of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
|
||||
adc_dev->channel_line[channels] = val;
|
||||
channels++;
|
||||
}
|
||||
adc_dev->channels = channels;
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
|
|
@ -191,10 +247,15 @@ err_ret:
|
|||
static int tiadc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
||||
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
||||
u32 step_en;
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
tiadc_channels_remove(indio_dev);
|
||||
|
||||
step_en = get_adc_step_mask(adc_dev);
|
||||
am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en);
|
||||
|
||||
iio_device_free(indio_dev);
|
||||
|
||||
return 0;
|
||||
|
|
@ -205,9 +266,10 @@ static int tiadc_suspend(struct device *dev)
|
|||
{
|
||||
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
||||
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
||||
struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
|
||||
struct ti_tscadc_dev *tscadc_dev;
|
||||
unsigned int idle;
|
||||
|
||||
tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
|
||||
if (!device_may_wakeup(tscadc_dev->dev)) {
|
||||
idle = tiadc_readl(adc_dev, REG_CTRL);
|
||||
idle &= ~(CNTRLREG_TSCSSENB);
|
||||
|
|
@ -243,16 +305,22 @@ static const struct dev_pm_ops tiadc_pm_ops = {
|
|||
#define TIADC_PM_OPS NULL
|
||||
#endif
|
||||
|
||||
static const struct of_device_id ti_adc_dt_ids[] = {
|
||||
{ .compatible = "ti,am3359-adc", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);
|
||||
|
||||
static struct platform_driver tiadc_driver = {
|
||||
.driver = {
|
||||
.name = "tiadc",
|
||||
.name = "TI-am335x-adc",
|
||||
.owner = THIS_MODULE,
|
||||
.pm = TIADC_PM_OPS,
|
||||
.of_match_table = of_match_ptr(ti_adc_dt_ids),
|
||||
},
|
||||
.probe = tiadc_probe,
|
||||
.remove = tiadc_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(tiadc_driver);
|
||||
|
||||
MODULE_DESCRIPTION("TI ADC controller driver");
|
||||
|
|
|
|||
|
|
@ -24,8 +24,9 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/input/ti_am335x_tsc.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
|
||||
#include <linux/mfd/ti_am335x_tscadc.h>
|
||||
|
||||
|
|
@ -33,6 +34,13 @@
|
|||
#define SEQ_SETTLE 275
|
||||
#define MAX_12BIT ((1 << 12) - 1)
|
||||
|
||||
static const int config_pins[] = {
|
||||
STEPCONFIG_XPP,
|
||||
STEPCONFIG_XNN,
|
||||
STEPCONFIG_YPP,
|
||||
STEPCONFIG_YNN,
|
||||
};
|
||||
|
||||
struct titsc {
|
||||
struct input_dev *input;
|
||||
struct ti_tscadc_dev *mfd_tscadc;
|
||||
|
|
@ -40,7 +48,10 @@ struct titsc {
|
|||
unsigned int wires;
|
||||
unsigned int x_plate_resistance;
|
||||
bool pen_down;
|
||||
int steps_to_configure;
|
||||
int coordinate_readouts;
|
||||
u32 config_inp[4];
|
||||
u32 bit_xp, bit_xn, bit_yp, bit_yn;
|
||||
u32 inp_xp, inp_xn, inp_yp, inp_yn;
|
||||
};
|
||||
|
||||
static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
|
||||
|
|
@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg,
|
|||
writel(val, tsc->mfd_tscadc->tscadc_base + reg);
|
||||
}
|
||||
|
||||
static int titsc_config_wires(struct titsc *ts_dev)
|
||||
{
|
||||
u32 analog_line[4];
|
||||
u32 wire_order[4];
|
||||
int i, bit_cfg;
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
/*
|
||||
* Get the order in which TSC wires are attached
|
||||
* w.r.t. each of the analog input lines on the EVM.
|
||||
*/
|
||||
analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
|
||||
wire_order[i] = ts_dev->config_inp[i] & 0x0F;
|
||||
if (WARN_ON(analog_line[i] > 7))
|
||||
return -EINVAL;
|
||||
if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
int an_line;
|
||||
int wi_order;
|
||||
|
||||
an_line = analog_line[i];
|
||||
wi_order = wire_order[i];
|
||||
bit_cfg = config_pins[wi_order];
|
||||
if (bit_cfg == 0)
|
||||
return -EINVAL;
|
||||
switch (wi_order) {
|
||||
case 0:
|
||||
ts_dev->bit_xp = bit_cfg;
|
||||
ts_dev->inp_xp = an_line;
|
||||
break;
|
||||
|
||||
case 1:
|
||||
ts_dev->bit_xn = bit_cfg;
|
||||
ts_dev->inp_xn = an_line;
|
||||
break;
|
||||
|
||||
case 2:
|
||||
ts_dev->bit_yp = bit_cfg;
|
||||
ts_dev->inp_yp = an_line;
|
||||
break;
|
||||
case 3:
|
||||
ts_dev->bit_yn = bit_cfg;
|
||||
ts_dev->inp_yn = an_line;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void titsc_step_config(struct titsc *ts_dev)
|
||||
{
|
||||
unsigned int config;
|
||||
int i, total_steps;
|
||||
|
||||
/* Configure the Step registers */
|
||||
total_steps = 2 * ts_dev->steps_to_configure;
|
||||
int i;
|
||||
int end_step;
|
||||
u32 stepenable;
|
||||
|
||||
config = STEPCONFIG_MODE_HWSYNC |
|
||||
STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
|
||||
STEPCONFIG_AVG_16 | ts_dev->bit_xp;
|
||||
switch (ts_dev->wires) {
|
||||
case 4:
|
||||
config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
|
||||
config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
|
||||
break;
|
||||
case 5:
|
||||
config |= STEPCONFIG_YNN |
|
||||
STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
|
||||
STEPCONFIG_YPP;
|
||||
config |= ts_dev->bit_yn |
|
||||
STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
|
||||
ts_dev->bit_yp;
|
||||
break;
|
||||
case 8:
|
||||
config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
|
||||
config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
|
||||
break;
|
||||
}
|
||||
|
||||
for (i = 1; i <= ts_dev->steps_to_configure; i++) {
|
||||
/* 1 … coordinate_readouts is for X */
|
||||
end_step = ts_dev->coordinate_readouts;
|
||||
for (i = 0; i < end_step; i++) {
|
||||
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
|
||||
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
|
||||
}
|
||||
|
||||
config = 0;
|
||||
config = STEPCONFIG_MODE_HWSYNC |
|
||||
STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
|
||||
STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
|
||||
STEPCONFIG_AVG_16 | ts_dev->bit_yn |
|
||||
STEPCONFIG_INM_ADCREFM;
|
||||
switch (ts_dev->wires) {
|
||||
case 4:
|
||||
config |= STEPCONFIG_YPP;
|
||||
config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
|
||||
break;
|
||||
case 5:
|
||||
config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
|
||||
STEPCONFIG_XNP | STEPCONFIG_YPN;
|
||||
config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
|
||||
ts_dev->bit_xn | ts_dev->bit_yp;
|
||||
break;
|
||||
case 8:
|
||||
config |= STEPCONFIG_YPP;
|
||||
config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
|
||||
break;
|
||||
}
|
||||
|
||||
for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
|
||||
/* coordinate_readouts … coordinate_readouts * 2 is for Y */
|
||||
end_step = ts_dev->coordinate_readouts * 2;
|
||||
for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
|
||||
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
|
||||
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
|
||||
}
|
||||
|
||||
config = 0;
|
||||
/* Charge step configuration */
|
||||
config = STEPCONFIG_XPP | STEPCONFIG_YNN |
|
||||
config = ts_dev->bit_xp | ts_dev->bit_yn |
|
||||
STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
|
||||
STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
|
||||
STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp);
|
||||
|
||||
titsc_writel(ts_dev, REG_CHARGECONFIG, config);
|
||||
titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
|
||||
|
||||
config = 0;
|
||||
/* Configure to calculate pressure */
|
||||
/* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */
|
||||
config = STEPCONFIG_MODE_HWSYNC |
|
||||
STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
|
||||
STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
|
||||
titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
|
||||
titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
|
||||
STEPCONFIG_AVG_16 | ts_dev->bit_yp |
|
||||
ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
|
||||
STEPCONFIG_INP(ts_dev->inp_xp);
|
||||
titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
|
||||
titsc_writel(ts_dev, REG_STEPDELAY(end_step),
|
||||
STEPCONFIG_OPENDLY);
|
||||
|
||||
config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
|
||||
titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
|
||||
titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
|
||||
end_step++;
|
||||
config |= STEPCONFIG_INP(ts_dev->inp_yn);
|
||||
titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
|
||||
titsc_writel(ts_dev, REG_STEPDELAY(end_step),
|
||||
STEPCONFIG_OPENDLY);
|
||||
|
||||
titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
|
||||
/* The steps1 … end and bit 0 for TS_Charge */
|
||||
stepenable = (1 << (end_step + 2)) - 1;
|
||||
am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
|
||||
}
|
||||
|
||||
static void titsc_read_coordinates(struct titsc *ts_dev,
|
||||
unsigned int *x, unsigned int *y)
|
||||
u32 *x, u32 *y, u32 *z1, u32 *z2)
|
||||
{
|
||||
unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
|
||||
unsigned int prev_val_x = ~0, prev_val_y = ~0;
|
||||
unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
|
||||
unsigned int read, diff;
|
||||
unsigned int i, channel;
|
||||
unsigned int creads = ts_dev->coordinate_readouts;
|
||||
|
||||
*z1 = *z2 = 0;
|
||||
if (fifocount % (creads * 2 + 2))
|
||||
fifocount -= fifocount % (creads * 2 + 2);
|
||||
/*
|
||||
* Delta filter is used to remove large variations in sampled
|
||||
* values from ADC. The filter tries to predict where the next
|
||||
|
|
@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
|
|||
* algorithm compares the difference with that of a present value,
|
||||
* if true the value is reported to the sub system.
|
||||
*/
|
||||
for (i = 0; i < fifocount - 1; i++) {
|
||||
for (i = 0; i < fifocount; i++) {
|
||||
read = titsc_readl(ts_dev, REG_FIFO0);
|
||||
channel = read & 0xf0000;
|
||||
channel = channel >> 0x10;
|
||||
if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
|
||||
read &= 0xfff;
|
||||
|
||||
channel = (read & 0xf0000) >> 16;
|
||||
read &= 0xfff;
|
||||
if (channel < creads) {
|
||||
diff = abs(read - prev_val_x);
|
||||
if (diff < prev_diff_x) {
|
||||
prev_diff_x = diff;
|
||||
*x = read;
|
||||
}
|
||||
prev_val_x = read;
|
||||
}
|
||||
|
||||
read = titsc_readl(ts_dev, REG_FIFO1);
|
||||
channel = read & 0xf0000;
|
||||
channel = channel >> 0x10;
|
||||
if ((channel >= ts_dev->steps_to_configure) &&
|
||||
(channel < (2 * ts_dev->steps_to_configure - 1))) {
|
||||
read &= 0xfff;
|
||||
} else if (channel < creads * 2) {
|
||||
diff = abs(read - prev_val_y);
|
||||
if (diff < prev_diff_y) {
|
||||
prev_diff_y = diff;
|
||||
*y = read;
|
||||
}
|
||||
prev_val_y = read;
|
||||
|
||||
} else if (channel < creads * 2 + 1) {
|
||||
*z1 = read;
|
||||
|
||||
} else if (channel < creads * 2 + 2) {
|
||||
*z2 = read;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev)
|
|||
unsigned int x = 0, y = 0;
|
||||
unsigned int z1, z2, z;
|
||||
unsigned int fsm;
|
||||
unsigned int fifo1count, fifo0count;
|
||||
int i;
|
||||
|
||||
status = titsc_readl(ts_dev, REG_IRQSTATUS);
|
||||
if (status & IRQENB_FIFO0THRES) {
|
||||
titsc_read_coordinates(ts_dev, &x, &y);
|
||||
|
||||
z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
|
||||
z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
|
||||
|
||||
fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
|
||||
for (i = 0; i < fifo1count; i++)
|
||||
titsc_readl(ts_dev, REG_FIFO1);
|
||||
|
||||
fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
|
||||
for (i = 0; i < fifo0count; i++)
|
||||
titsc_readl(ts_dev, REG_FIFO0);
|
||||
titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
|
||||
|
||||
if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
|
||||
/*
|
||||
|
|
@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev)
|
|||
* Resistance(touch) = x plate resistance *
|
||||
* x postion/4096 * ((z2 / z1) - 1)
|
||||
*/
|
||||
z = z2 - z1;
|
||||
z = z1 - z2;
|
||||
z *= x;
|
||||
z *= ts_dev->x_plate_resistance;
|
||||
z /= z1;
|
||||
z /= z2;
|
||||
z = (z + 2047) >> 12;
|
||||
|
||||
if (z <= MAX_12BIT) {
|
||||
|
|
@ -248,10 +308,53 @@ static irqreturn_t titsc_irq(int irq, void *dev)
|
|||
irqclr |= IRQENB_PENUP;
|
||||
}
|
||||
|
||||
titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
|
||||
if (status & IRQENB_HW_PEN) {
|
||||
|
||||
titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
|
||||
return IRQ_HANDLED;
|
||||
titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
|
||||
titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
|
||||
}
|
||||
|
||||
if (irqclr) {
|
||||
titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
|
||||
am335x_tsc_se_update(ts_dev->mfd_tscadc);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
static int titsc_parse_dt(struct platform_device *pdev,
|
||||
struct titsc *ts_dev)
|
||||
{
|
||||
struct device_node *node = pdev->dev.of_node;
|
||||
int err;
|
||||
|
||||
if (!node)
|
||||
return -EINVAL;
|
||||
|
||||
err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
|
||||
if (err < 0)
|
||||
return err;
|
||||
switch (ts_dev->wires) {
|
||||
case 4:
|
||||
case 5:
|
||||
case 8:
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
err = of_property_read_u32(node, "ti,x-plate-resistance",
|
||||
&ts_dev->x_plate_resistance);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
err = of_property_read_u32(node, "ti,coordiante-readouts",
|
||||
&ts_dev->coordinate_readouts);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
return of_property_read_u32_array(node, "ti,wire-config",
|
||||
ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev)
|
|||
{
|
||||
struct titsc *ts_dev;
|
||||
struct input_dev *input_dev;
|
||||
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
|
||||
struct mfd_tscadc_board *pdata;
|
||||
struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
|
||||
int err;
|
||||
|
||||
pdata = tscadc_dev->dev->platform_data;
|
||||
|
||||
if (!pdata) {
|
||||
dev_err(&pdev->dev, "Could not find platform data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Allocate memory for device */
|
||||
ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
|
||||
input_dev = input_allocate_device();
|
||||
|
|
@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev)
|
|||
ts_dev->mfd_tscadc = tscadc_dev;
|
||||
ts_dev->input = input_dev;
|
||||
ts_dev->irq = tscadc_dev->irq;
|
||||
ts_dev->wires = pdata->tsc_init->wires;
|
||||
ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
|
||||
ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
|
||||
|
||||
err = titsc_parse_dt(pdev, ts_dev);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "Could not find valid DT data.\n");
|
||||
goto err_free_mem;
|
||||
}
|
||||
|
||||
err = request_irq(ts_dev->irq, titsc_irq,
|
||||
0, pdev->dev.driver->name, ts_dev);
|
||||
|
|
@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
|
||||
err = titsc_config_wires(ts_dev);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "wrong i/p wire configuration\n");
|
||||
goto err_free_irq;
|
||||
}
|
||||
titsc_step_config(ts_dev);
|
||||
titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
|
||||
titsc_writel(ts_dev, REG_FIFO0THR,
|
||||
ts_dev->coordinate_readouts * 2 + 2 - 1);
|
||||
|
||||
input_dev->name = "ti-tsc";
|
||||
input_dev->dev.parent = &pdev->dev;
|
||||
|
|
@ -329,11 +433,16 @@ err_free_mem:
|
|||
|
||||
static int titsc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
|
||||
struct titsc *ts_dev = tscadc_dev->tsc;
|
||||
struct titsc *ts_dev = platform_get_drvdata(pdev);
|
||||
u32 steps;
|
||||
|
||||
free_irq(ts_dev->irq, ts_dev);
|
||||
|
||||
/* total steps followed by the enable mask */
|
||||
steps = 2 * ts_dev->coordinate_readouts + 2;
|
||||
steps = (1 << steps) - 1;
|
||||
am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
|
||||
|
||||
input_unregister_device(ts_dev->input);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
|
@ -344,10 +453,11 @@ static int titsc_remove(struct platform_device *pdev)
|
|||
#ifdef CONFIG_PM
|
||||
static int titsc_suspend(struct device *dev)
|
||||
{
|
||||
struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
|
||||
struct titsc *ts_dev = tscadc_dev->tsc;
|
||||
struct titsc *ts_dev = dev_get_drvdata(dev);
|
||||
struct ti_tscadc_dev *tscadc_dev;
|
||||
unsigned int idle;
|
||||
|
||||
tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
|
||||
if (device_may_wakeup(tscadc_dev->dev)) {
|
||||
idle = titsc_readl(ts_dev, REG_IRQENABLE);
|
||||
titsc_writel(ts_dev, REG_IRQENABLE,
|
||||
|
|
@ -359,9 +469,10 @@ static int titsc_suspend(struct device *dev)
|
|||
|
||||
static int titsc_resume(struct device *dev)
|
||||
{
|
||||
struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
|
||||
struct titsc *ts_dev = tscadc_dev->tsc;
|
||||
struct titsc *ts_dev = dev_get_drvdata(dev);
|
||||
struct ti_tscadc_dev *tscadc_dev;
|
||||
|
||||
tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
|
||||
if (device_may_wakeup(tscadc_dev->dev)) {
|
||||
titsc_writel(ts_dev, REG_IRQWAKEUP,
|
||||
0x00);
|
||||
|
|
@ -369,7 +480,7 @@ static int titsc_resume(struct device *dev)
|
|||
}
|
||||
titsc_step_config(ts_dev);
|
||||
titsc_writel(ts_dev, REG_FIFO0THR,
|
||||
ts_dev->steps_to_configure);
|
||||
ts_dev->coordinate_readouts * 2 + 2 - 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -382,13 +493,20 @@ static const struct dev_pm_ops titsc_pm_ops = {
|
|||
#define TITSC_PM_OPS NULL
|
||||
#endif
|
||||
|
||||
static const struct of_device_id ti_tsc_dt_ids[] = {
|
||||
{ .compatible = "ti,am3359-tsc", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
|
||||
|
||||
static struct platform_driver ti_tsc_driver = {
|
||||
.probe = titsc_probe,
|
||||
.remove = titsc_remove,
|
||||
.driver = {
|
||||
.name = "tsc",
|
||||
.name = "TI-am335x-tsc",
|
||||
.owner = THIS_MODULE,
|
||||
.pm = TITSC_PM_OPS,
|
||||
.of_match_table = of_match_ptr(ti_tsc_dt_ids),
|
||||
},
|
||||
};
|
||||
module_platform_driver(ti_tsc_driver);
|
||||
|
|
|
|||
|
|
@ -22,10 +22,10 @@
|
|||
#include <linux/regmap.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
|
||||
#include <linux/mfd/ti_am335x_tscadc.h>
|
||||
#include <linux/input/ti_am335x_tsc.h>
|
||||
#include <linux/platform_data/ti_am335x_adc.h>
|
||||
|
||||
static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
|
||||
{
|
||||
|
|
@ -48,6 +48,32 @@ static const struct regmap_config tscadc_regmap_config = {
|
|||
.val_bits = 32,
|
||||
};
|
||||
|
||||
void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc)
|
||||
{
|
||||
tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(am335x_tsc_se_update);
|
||||
|
||||
void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val)
|
||||
{
|
||||
spin_lock(&tsadc->reg_lock);
|
||||
tsadc->reg_se_cache |= val;
|
||||
spin_unlock(&tsadc->reg_lock);
|
||||
|
||||
am335x_tsc_se_update(tsadc);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(am335x_tsc_se_set);
|
||||
|
||||
void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val)
|
||||
{
|
||||
spin_lock(&tsadc->reg_lock);
|
||||
tsadc->reg_se_cache &= ~val;
|
||||
spin_unlock(&tsadc->reg_lock);
|
||||
|
||||
am335x_tsc_se_update(tsadc);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
|
||||
|
||||
static void tscadc_idle_config(struct ti_tscadc_dev *config)
|
||||
{
|
||||
unsigned int idleconfig;
|
||||
|
|
@ -63,27 +89,48 @@ static int ti_tscadc_probe(struct platform_device *pdev)
|
|||
struct ti_tscadc_dev *tscadc;
|
||||
struct resource *res;
|
||||
struct clk *clk;
|
||||
struct mfd_tscadc_board *pdata = pdev->dev.platform_data;
|
||||
struct device_node *node = pdev->dev.of_node;
|
||||
struct mfd_cell *cell;
|
||||
struct property *prop;
|
||||
const __be32 *cur;
|
||||
u32 val;
|
||||
int err, ctrl;
|
||||
int clk_value, clock_rate;
|
||||
int tsc_wires, adc_channels = 0, total_channels;
|
||||
int tsc_wires = 0, adc_channels = 0, total_channels;
|
||||
int readouts = 0;
|
||||
|
||||
if (!pdata) {
|
||||
dev_err(&pdev->dev, "Could not find platform data\n");
|
||||
if (!pdev->dev.of_node) {
|
||||
dev_err(&pdev->dev, "Could not find valid DT data.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (pdata->adc_init)
|
||||
adc_channels = pdata->adc_init->adc_channels;
|
||||
node = of_get_child_by_name(pdev->dev.of_node, "tsc");
|
||||
of_property_read_u32(node, "ti,wires", &tsc_wires);
|
||||
of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
|
||||
|
||||
tsc_wires = pdata->tsc_init->wires;
|
||||
node = of_get_child_by_name(pdev->dev.of_node, "adc");
|
||||
of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
|
||||
adc_channels++;
|
||||
if (val > 7) {
|
||||
dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
|
||||
val);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
total_channels = tsc_wires + adc_channels;
|
||||
|
||||
if (total_channels > 8) {
|
||||
dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
if (total_channels == 0) {
|
||||
dev_err(&pdev->dev, "Need atleast one channel.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (readouts * 2 + 2 + adc_channels > 16) {
|
||||
dev_err(&pdev->dev, "Too many step configurations requested\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
|
|
@ -129,6 +176,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
|
|||
goto ret;
|
||||
}
|
||||
|
||||
spin_lock_init(&tscadc->reg_lock);
|
||||
pm_runtime_enable(&pdev->dev);
|
||||
pm_runtime_get_sync(&pdev->dev);
|
||||
|
||||
|
|
@ -173,26 +221,37 @@ static int ti_tscadc_probe(struct platform_device *pdev)
|
|||
ctrl |= CNTRLREG_TSCSSENB;
|
||||
tscadc_writel(tscadc, REG_CTRL, ctrl);
|
||||
|
||||
tscadc->used_cells = 0;
|
||||
tscadc->tsc_cell = -1;
|
||||
tscadc->adc_cell = -1;
|
||||
|
||||
/* TSC Cell */
|
||||
cell = &tscadc->cells[TSC_CELL];
|
||||
cell->name = "tsc";
|
||||
cell->platform_data = tscadc;
|
||||
cell->pdata_size = sizeof(*tscadc);
|
||||
if (tsc_wires > 0) {
|
||||
tscadc->tsc_cell = tscadc->used_cells;
|
||||
cell = &tscadc->cells[tscadc->used_cells++];
|
||||
cell->name = "TI-am335x-tsc";
|
||||
cell->of_compatible = "ti,am3359-tsc";
|
||||
cell->platform_data = &tscadc;
|
||||
cell->pdata_size = sizeof(tscadc);
|
||||
}
|
||||
|
||||
/* ADC Cell */
|
||||
cell = &tscadc->cells[ADC_CELL];
|
||||
cell->name = "tiadc";
|
||||
cell->platform_data = tscadc;
|
||||
cell->pdata_size = sizeof(*tscadc);
|
||||
if (adc_channels > 0) {
|
||||
tscadc->adc_cell = tscadc->used_cells;
|
||||
cell = &tscadc->cells[tscadc->used_cells++];
|
||||
cell->name = "TI-am335x-adc";
|
||||
cell->of_compatible = "ti,am3359-adc";
|
||||
cell->platform_data = &tscadc;
|
||||
cell->pdata_size = sizeof(tscadc);
|
||||
}
|
||||
|
||||
err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
|
||||
TSCADC_CELLS, NULL, 0, NULL);
|
||||
tscadc->used_cells, NULL, 0, NULL);
|
||||
if (err < 0)
|
||||
goto err_disable_clk;
|
||||
|
||||
device_init_wakeup(&pdev->dev, true);
|
||||
platform_set_drvdata(pdev, tscadc);
|
||||
|
||||
return 0;
|
||||
|
||||
err_disable_clk:
|
||||
|
|
@ -239,7 +298,7 @@ static int tscadc_resume(struct device *dev)
|
|||
CNTRLREG_STEPID | CNTRLREG_4WIRE;
|
||||
tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
|
||||
tscadc_idle_config(tscadc_dev);
|
||||
tscadc_writel(tscadc_dev, REG_SE, STPENB_STEPENB);
|
||||
am335x_tsc_se_update(tscadc_dev);
|
||||
restore = tscadc_readl(tscadc_dev, REG_CTRL);
|
||||
tscadc_writel(tscadc_dev, REG_CTRL,
|
||||
(restore | CNTRLREG_TSCSSENB));
|
||||
|
|
@ -256,11 +315,18 @@ static const struct dev_pm_ops tscadc_pm_ops = {
|
|||
#define TSCADC_PM_OPS NULL
|
||||
#endif
|
||||
|
||||
static const struct of_device_id ti_tscadc_dt_ids[] = {
|
||||
{ .compatible = "ti,am3359-tscadc", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
|
||||
|
||||
static struct platform_driver ti_tscadc_driver = {
|
||||
.driver = {
|
||||
.name = "ti_tscadc",
|
||||
.name = "ti_am3359-tscadc",
|
||||
.owner = THIS_MODULE,
|
||||
.pm = TSCADC_PM_OPS,
|
||||
.of_match_table = of_match_ptr(ti_tscadc_dt_ids),
|
||||
},
|
||||
.probe = ti_tscadc_probe,
|
||||
.remove = ti_tscadc_remove,
|
||||
|
|
|
|||
|
|
@ -1,23 +0,0 @@
|
|||
#ifndef __LINUX_TI_AM335X_TSC_H
|
||||
#define __LINUX_TI_AM335X_TSC_H
|
||||
|
||||
/**
|
||||
* struct tsc_data Touchscreen wire configuration
|
||||
* @wires: Wires refer to application modes
|
||||
* i.e. 4/5/8 wire touchscreen support
|
||||
* on the platform.
|
||||
* @x_plate_resistance: X plate resistance.
|
||||
* @steps_to_configure: The sequencer supports a total of
|
||||
* 16 programmable steps.
|
||||
* A step configured to read a single
|
||||
* co-ordinate value, can be applied
|
||||
* more number of times for better results.
|
||||
*/
|
||||
|
||||
struct tsc_data {
|
||||
int wires;
|
||||
int x_plate_resistance;
|
||||
int steps_to_configure;
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
@ -30,8 +30,8 @@
|
|||
#define REG_IDLECONFIG 0x058
|
||||
#define REG_CHARGECONFIG 0x05C
|
||||
#define REG_CHARGEDELAY 0x060
|
||||
#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8))
|
||||
#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8))
|
||||
#define REG_STEPCONFIG(n) (0x64 + ((n) * 8))
|
||||
#define REG_STEPDELAY(n) (0x68 + ((n) * 8))
|
||||
#define REG_FIFO0CNT 0xE4
|
||||
#define REG_FIFO0THR 0xE8
|
||||
#define REG_FIFO1CNT 0xF0
|
||||
|
|
@ -46,8 +46,6 @@
|
|||
/* Step Enable */
|
||||
#define STEPENB_MASK (0x1FFFF << 0)
|
||||
#define STEPENB(val) ((val) << 0)
|
||||
#define STPENB_STEPENB STEPENB(0x1FFFF)
|
||||
#define STPENB_STEPENB_TC STEPENB(0x1FFF)
|
||||
|
||||
/* IRQ enable */
|
||||
#define IRQENB_HW_PEN BIT(0)
|
||||
|
|
@ -73,8 +71,6 @@
|
|||
#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8)
|
||||
#define STEPCONFIG_INP_MASK (0xF << 19)
|
||||
#define STEPCONFIG_INP(val) ((val) << 19)
|
||||
#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2)
|
||||
#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3)
|
||||
#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4)
|
||||
#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8)
|
||||
#define STEPCONFIG_FIFO1 BIT(26)
|
||||
|
|
@ -96,7 +92,6 @@
|
|||
#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1)
|
||||
#define STEPCHARGE_INP_MASK (0xF << 19)
|
||||
#define STEPCHARGE_INP(val) ((val) << 19)
|
||||
#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1)
|
||||
#define STEPCHARGE_RFM_MASK (3 << 23)
|
||||
#define STEPCHARGE_RFM(val) ((val) << 23)
|
||||
#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1)
|
||||
|
|
@ -125,22 +120,17 @@
|
|||
|
||||
#define TSCADC_CELLS 2
|
||||
|
||||
enum tscadc_cells {
|
||||
TSC_CELL,
|
||||
ADC_CELL,
|
||||
};
|
||||
|
||||
struct mfd_tscadc_board {
|
||||
struct tsc_data *tsc_init;
|
||||
struct adc_data *adc_init;
|
||||
};
|
||||
|
||||
struct ti_tscadc_dev {
|
||||
struct device *dev;
|
||||
struct regmap *regmap_tscadc;
|
||||
void __iomem *tscadc_base;
|
||||
int irq;
|
||||
int used_cells; /* 1-2 */
|
||||
int tsc_cell; /* -1 if not used */
|
||||
int adc_cell; /* -1 if not used */
|
||||
struct mfd_cell cells[TSCADC_CELLS];
|
||||
u32 reg_se_cache;
|
||||
spinlock_t reg_lock;
|
||||
|
||||
/* tsc device */
|
||||
struct titsc *tsc;
|
||||
|
|
@ -149,4 +139,15 @@ struct ti_tscadc_dev {
|
|||
struct adc_device *adc;
|
||||
};
|
||||
|
||||
static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p)
|
||||
{
|
||||
struct ti_tscadc_dev **tscadc_dev = p->dev.platform_data;
|
||||
|
||||
return *tscadc_dev;
|
||||
}
|
||||
|
||||
void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc);
|
||||
void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val);
|
||||
void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,14 +0,0 @@
|
|||
#ifndef __LINUX_TI_AM335X_ADC_H
|
||||
#define __LINUX_TI_AM335X_ADC_H
|
||||
|
||||
/**
|
||||
* struct adc_data ADC Input information
|
||||
* @adc_channels: Number of analog inputs
|
||||
* available for ADC.
|
||||
*/
|
||||
|
||||
struct adc_data {
|
||||
unsigned int adc_channels;
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in a new issue