From da29fe2bf573f0ae56fdc2e790387cb73fc8c6f8 Mon Sep 17 00:00:00 2001 From: Shinobu Uehara Date: Sun, 24 Aug 2014 20:03:00 -0700 Subject: [PATCH] mmc: tmio: add actual clock support as option Some controller is supporting actual clock on SD_CLK_CTRL :: DIV[7:0]. Renesas SH-Mobile SDHI doesn't support, but, Renesas R-Car SDHI supports it. This patch adds new TMIO_MMC_CLK_ACTUAL flag for it. [Kuninori Morimoto: tidyuped for upstreaming] Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Signed-off-by: Shinobu Uehara Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- drivers/mmc/host/sh_mobile_sdhi.c | 6 ++++-- drivers/mmc/host/tmio_mmc_pio.c | 5 +++++ include/linux/mfd/tmio.h | 5 +++++ 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index a077da02bb8e..d5d493719491 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -49,12 +49,14 @@ static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = { }; static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = { - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE | + TMIO_MMC_CLK_ACTUAL, .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, }; static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = { - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE | + TMIO_MMC_CLK_ACTUAL, .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .capabilities2 = MMC_CAP2_NO_MULTI_READ, .dma_rx_offset = 0x2000, diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 7cfe939992de..ba454131f9a8 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -159,6 +159,11 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, for (clock = host->mmc->f_min, clk = 0x80000080; new_clock >= (clock<<1); clk >>= 1) clock <<= 1; + + /* 1/1 clock is option */ + if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && + ((clk >> 22) & 0x1)) + clk |= 0xff; } if (host->set_clk_div) diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index adcb0cdb2fdb..90436d523e5e 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -99,6 +99,11 @@ */ #define TMIO_MMC_HAVE_CTL_DMA_REG (1 << 9) +/* + * Some controllers allows to set SDx actual clock + */ +#define TMIO_MMC_CLK_ACTUAL (1 << 10) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);