gpio: crystalcove: support virtual GPIO
The virtual GPIO introduced in ACPI table of Baytrail-T based system is used to solve a problem under Windows. We do not have such problems under Linux so we do not actually need them. But we have to tell GPIO library that the Crystal Cove GPIO chip has this many GPIO pins or the common GPIO handler will refuse any access to those high number GPIO pins, which will resulted in a failure evaluation of every ACPI control method that is used to turn on/off power resource and/or report sensor temperatures. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [changed vgpio number from 0x5e to 94] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
e4742d5769
commit
dcdc3018d6
|
@ -24,6 +24,7 @@
|
|||
#include <linux/mfd/intel_soc_pmic.h>
|
||||
|
||||
#define CRYSTALCOVE_GPIO_NUM 16
|
||||
#define CRYSTALCOVE_VGPIO_NUM 94
|
||||
|
||||
#define UPDATE_IRQ_TYPE BIT(0)
|
||||
#define UPDATE_IRQ_MASK BIT(1)
|
||||
|
@ -130,6 +131,9 @@ static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
|
|||
{
|
||||
struct crystalcove_gpio *cg = to_cg(chip);
|
||||
|
||||
if (gpio > CRYSTALCOVE_VGPIO_NUM)
|
||||
return 0;
|
||||
|
||||
return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
|
||||
CTLO_INPUT_SET);
|
||||
}
|
||||
|
@ -139,6 +143,9 @@ static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned gpio,
|
|||
{
|
||||
struct crystalcove_gpio *cg = to_cg(chip);
|
||||
|
||||
if (gpio > CRYSTALCOVE_VGPIO_NUM)
|
||||
return 0;
|
||||
|
||||
return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
|
||||
CTLO_OUTPUT_SET | value);
|
||||
}
|
||||
|
@ -149,6 +156,9 @@ static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio)
|
|||
int ret;
|
||||
unsigned int val;
|
||||
|
||||
if (gpio > CRYSTALCOVE_VGPIO_NUM)
|
||||
return 0;
|
||||
|
||||
ret = regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
@ -161,6 +171,9 @@ static void crystalcove_gpio_set(struct gpio_chip *chip,
|
|||
{
|
||||
struct crystalcove_gpio *cg = to_cg(chip);
|
||||
|
||||
if (gpio > CRYSTALCOVE_VGPIO_NUM)
|
||||
return;
|
||||
|
||||
if (value)
|
||||
regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 1);
|
||||
else
|
||||
|
@ -256,7 +269,7 @@ static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
|
|||
|
||||
pending = p0 | p1 << 8;
|
||||
|
||||
for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
|
||||
for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) {
|
||||
if (pending & BIT(gpio)) {
|
||||
virq = irq_find_mapping(cg->chip.irqdomain, gpio);
|
||||
generic_handle_irq(virq);
|
||||
|
@ -273,7 +286,7 @@ static void crystalcove_gpio_dbg_show(struct seq_file *s,
|
|||
int gpio, offset;
|
||||
unsigned int ctlo, ctli, mirqs0, mirqsx, irq;
|
||||
|
||||
for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
|
||||
for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) {
|
||||
regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
|
||||
regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli);
|
||||
regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0,
|
||||
|
@ -320,7 +333,7 @@ static int crystalcove_gpio_probe(struct platform_device *pdev)
|
|||
cg->chip.get = crystalcove_gpio_get;
|
||||
cg->chip.set = crystalcove_gpio_set;
|
||||
cg->chip.base = -1;
|
||||
cg->chip.ngpio = CRYSTALCOVE_GPIO_NUM;
|
||||
cg->chip.ngpio = CRYSTALCOVE_VGPIO_NUM;
|
||||
cg->chip.can_sleep = true;
|
||||
cg->chip.dev = dev;
|
||||
cg->chip.dbg_show = crystalcove_gpio_dbg_show;
|
||||
|
|
Loading…
Reference in a new issue