Merge 3.12-rc6 into char-misc-next

We want the fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2013-10-19 13:02:47 -07:00
commit dfc568e6bc
565 changed files with 4633 additions and 3338 deletions

View file

@ -37,8 +37,8 @@ Description:
that the USB device has been connected to the machine. This
file is read-only.
Users:
PowerTOP <power@bughost.org>
http://www.lesswatts.org/projects/powertop/
PowerTOP <powertop@lists.01.org>
https://01.org/powertop/
What: /sys/bus/usb/device/.../power/active_duration
Date: January 2008
@ -57,8 +57,8 @@ Description:
will give an integer percentage. Note that this does not
account for counter wrap.
Users:
PowerTOP <power@bughost.org>
http://www.lesswatts.org/projects/powertop/
PowerTOP <powertop@lists.01.org>
https://01.org/powertop/
What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
Date: January 2008

View file

@ -1,6 +1,6 @@
What: /sys/devices/.../power/
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power directory contains attributes
allowing the user space to check and modify some power
@ -8,7 +8,7 @@ Description:
What: /sys/devices/.../power/wakeup
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/wakeup attribute allows the user
space to check if the device is enabled to wake up the system
@ -34,7 +34,7 @@ Description:
What: /sys/devices/.../power/control
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/control attribute allows the user
space to control the run-time power management of the device.
@ -53,7 +53,7 @@ Description:
What: /sys/devices/.../power/async
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../async attribute allows the user space to
enable or diasble the device's suspend and resume callbacks to
@ -79,7 +79,7 @@ Description:
What: /sys/devices/.../power/wakeup_count
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_count attribute contains the number
of signaled wakeup events associated with the device. This
@ -88,7 +88,7 @@ Description:
What: /sys/devices/.../power/wakeup_active_count
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active_count attribute contains the
number of times the processing of wakeup events associated with
@ -98,7 +98,7 @@ Description:
What: /sys/devices/.../power/wakeup_abort_count
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_abort_count attribute contains the
number of times the processing of a wakeup event associated with
@ -109,7 +109,7 @@ Description:
What: /sys/devices/.../power/wakeup_expire_count
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_expire_count attribute contains the
number of times a wakeup event associated with the device has
@ -119,7 +119,7 @@ Description:
What: /sys/devices/.../power/wakeup_active
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active attribute contains either 1,
or 0, depending on whether or not a wakeup event associated with
@ -129,7 +129,7 @@ Description:
What: /sys/devices/.../power/wakeup_total_time_ms
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_total_time_ms attribute contains
the total time of processing wakeup events associated with the
@ -139,7 +139,7 @@ Description:
What: /sys/devices/.../power/wakeup_max_time_ms
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_max_time_ms attribute contains
the maximum time of processing a single wakeup event associated
@ -149,7 +149,7 @@ Description:
What: /sys/devices/.../power/wakeup_last_time_ms
Date: September 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_last_time_ms attribute contains
the value of the monotonic clock corresponding to the time of
@ -160,7 +160,7 @@ Description:
What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
@ -189,7 +189,7 @@ Description:
What: /sys/devices/.../power/pm_qos_latency_us
Date: March 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_resume_latency_us attribute
contains the PM QoS resume latency limit for the given device,
@ -207,7 +207,7 @@ Description:
What: /sys/devices/.../power/pm_qos_no_power_off
Date: September 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_no_power_off attribute
is used for manipulating the PM QoS "no power off" flag. If
@ -222,7 +222,7 @@ Description:
What: /sys/devices/.../power/pm_qos_remote_wakeup
Date: September 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_remote_wakeup attribute
is used for manipulating the PM QoS "remote wakeup required"

View file

@ -1,6 +1,6 @@
What: /sys/power/
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power directory will contain files that will
provide a unified interface to the power management
@ -8,7 +8,7 @@ Description:
What: /sys/power/state
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/state file controls the system power state.
Reading from this file returns what states are supported,
@ -22,7 +22,7 @@ Description:
What: /sys/power/disk
Date: September 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/disk file controls the operating mode of the
suspend-to-disk mechanism. Reading from this file returns
@ -67,7 +67,7 @@ Description:
What: /sys/power/image_size
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/image_size file controls the size of the image
created by the suspend-to-disk mechanism. It can be written a
@ -84,7 +84,7 @@ Description:
What: /sys/power/pm_trace
Date: August 2006
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_trace file controls the code which saves the
last PM event point in the RTC across reboots, so that you can
@ -133,7 +133,7 @@ Description:
What: /sys/power/pm_async
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_async file controls the switch allowing the
user space to enable or disable asynchronous suspend and resume
@ -146,7 +146,7 @@ Description:
What: /sys/power/wakeup_count
Date: July 2010
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wakeup_count file allows user space to put the
system into a sleep state while taking into account the
@ -161,7 +161,7 @@ Description:
What: /sys/power/reserved_size
Date: May 2011
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/reserved_size file allows user space to control
the amount of memory reserved for allocations made by device
@ -175,7 +175,7 @@ Description:
What: /sys/power/autosleep
Date: April 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/autosleep file can be written one of the strings
returned by reads from /sys/power/state. If that happens, a
@ -192,7 +192,7 @@ Description:
What: /sys/power/wake_lock
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_lock file allows user space to create
wakeup source objects and activate them on demand (if one of
@ -219,7 +219,7 @@ Description:
What: /sys/power/wake_unlock
Date: February 2012
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_unlock file allows user space to deactivate
wakeup sources created with the help of /sys/power/wake_lock.

View file

@ -4,4 +4,4 @@ CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
When to use this method is described in detail on the
Linux/ACPI home page:
http://www.lesswatts.org/projects/acpi/overridingDSDT.php
https://01.org/linux-acpi/documentation/overriding-dsdt

View file

@ -6,6 +6,8 @@ capability.txt
- Generic Block Device Capability (/sys/block/<device>/capability)
cfq-iosched.txt
- CFQ IO scheduler tunables
cmdline-partition.txt
- how to specify block device partitions on kernel command line
data-integrity.txt
- Block data integrity
deadline-iosched.txt

View file

@ -1,9 +1,9 @@
Embedded device command line partition
Embedded device command line partition parsing
=====================================================================
Read block device partition table from command line.
The partition used for fixed block device (eMMC) embedded device.
It is no MBR, save storage space. Bootloader can be easily accessed
Support for reading the block device partition table from the command line.
It is typically used for fixed block (eMMC) embedded devices.
It has no MBR, so saves storage space. Bootloader can be easily accessed
by absolute address of data on the block device.
Users can easily change the partition.

View file

@ -1,168 +0,0 @@
*** Memory binding ***
The /memory node provides basic information about the address and size
of the physical memory. This node is usually filled or updated by the
bootloader, depending on the actual memory configuration of the given
hardware.
The memory layout is described by the following node:
/ {
#address-cells = <(n)>;
#size-cells = <(m)>;
memory {
device_type = "memory";
reg = <(baseaddr1) (size1)
(baseaddr2) (size2)
...
(baseaddrN) (sizeN)>;
};
...
};
A memory node follows the typical device tree rules for "reg" property:
n: number of cells used to store base address value
m: number of cells used to store size value
baseaddrX: defines a base address of the defined memory bank
sizeX: the size of the defined memory bank
More than one memory bank can be defined.
*** Reserved memory regions ***
In /memory/reserved-memory node one can create child nodes describing
particular reserved (excluded from normal use) memory regions. Such
memory regions are usually designed for the special usage by various
device drivers. A good example are contiguous memory allocations or
memory sharing with other operating system on the same hardware board.
Those special memory regions might depend on the board configuration and
devices used on the target system.
Parameters for each memory region can be encoded into the device tree
with the following convention:
[(label):] (name) {
compatible = "linux,contiguous-memory-region", "reserved-memory-region";
reg = <(address) (size)>;
(linux,default-contiguous-region);
};
compatible: one or more of:
- "linux,contiguous-memory-region" - enables binding of this
region to Contiguous Memory Allocator (special region for
contiguous memory allocations, shared with movable system
memory, Linux kernel-specific).
- "reserved-memory-region" - compatibility is defined, given
region is assigned for exclusive usage for by the respective
devices.
reg: standard property defining the base address and size of
the memory region
linux,default-contiguous-region: property indicating that the region
is the default region for all contiguous memory
allocations, Linux specific (optional)
It is optional to specify the base address, so if one wants to use
autoconfiguration of the base address, '0' can be specified as a base
address in the 'reg' property.
The /memory/reserved-memory node must contain the same #address-cells
and #size-cells value as the root node.
*** Device node's properties ***
Once regions in the /memory/reserved-memory node have been defined, they
may be referenced by other device nodes. Bindings that wish to reference
memory regions should explicitly document their use of the following
property:
memory-region = <&phandle_to_defined_region>;
This property indicates that the device driver should use the memory
region pointed by the given phandle.
*** Example ***
This example defines a memory consisting of 4 memory banks. 3 contiguous
regions are defined for Linux kernel, one default of all device drivers
(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
and one for multimedia processing (labelled multimedia_mem, placed at
0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
device for DMA memory allocations (Linux kernel drivers will use CMA is
available or dma-exclusive usage otherwise). 'multimedia_mem' is
assigned to scaler@12500000 and codec@12600000 devices for contiguous
memory allocations when CMA driver is enabled.
The reason for creating a separate region for framebuffer device is to
match the framebuffer base address to the one configured by bootloader,
so once Linux kernel drivers starts no glitches on the displayed boot
logo appears. Scaller and codec drivers should share the memory
allocations.
/ {
#address-cells = <1>;
#size-cells = <1>;
/* ... */
memory {
reg = <0x40000000 0x10000000
0x50000000 0x10000000
0x60000000 0x10000000
0x70000000 0x10000000>;
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
/*
* global autoconfigured region for contiguous allocations
* (used only with Contiguous Memory Allocator)
*/
contig_region@0 {
compatible = "linux,contiguous-memory-region";
reg = <0x0 0x4000000>;
linux,default-contiguous-region;
};
/*
* special region for framebuffer
*/
display_region: region@78000000 {
compatible = "linux,contiguous-memory-region", "reserved-memory-region";
reg = <0x78000000 0x800000>;
};
/*
* special region for multimedia processing devices
*/
multimedia_region: region@77000000 {
compatible = "linux,contiguous-memory-region";
reg = <0x77000000 0x4000000>;
};
};
};
/* ... */
fb0: fb@12300000 {
status = "okay";
memory-region = <&display_region>;
};
scaler: scaler@12500000 {
status = "okay";
memory-region = <&multimedia_region>;
};
codec: codec@12600000 {
status = "okay";
memory-region = <&multimedia_region>;
};
};

View file

@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
optional bindings can be used.
Required properties:
- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
Optional properties:
- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
When used with Renesas SDHI hardware, the following compatibility strings
configure various model-specific properties:
"renesas,sh7372-sdhi": (default) compatible with SH7372
"renesas,r8a7740-sdhi": compatible with R8A7740: certain MMC/SD commands have to
wait for the interface to become idle.

View file

@ -86,6 +86,7 @@ General Properties:
Clock Properties:
- fsl,cksel Timer reference clock source.
- fsl,tclk-period Timer reference clock period in nanoseconds.
- fsl,tmr-prsc Prescaler, divides the output clock.
- fsl,tmr-add Frequency compensation value.
@ -97,7 +98,7 @@ Clock Properties:
clock. You must choose these carefully for the clock to work right.
Here is how to figure good values:
TimerOsc = system clock MHz
TimerOsc = selected reference clock MHz
tclk_period = desired clock period nanoseconds
NominalFreq = 1000 / tclk_period MHz
FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
@ -114,6 +115,20 @@ Clock Properties:
Pulse Per Second (PPS) signal, since this will be offered to the PPS
subsystem to synchronize the Linux clock.
Reference clock source is determined by the value, which is holded
in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
value, which will be directly written in those bits, that is why,
according to reference manual, the next clock sources can be used:
<0> - external high precision timer reference clock (TSEC_TMR_CLK
input is used for this purpose);
<1> - eTSEC system clock;
<2> - eTSEC1 transmit clock;
<3> - RTC clock input.
When this attribute is not used, eTSEC system clock will serve as
IEEE 1588 timer reference clock.
Example:
ptp_clock@24E00 {
@ -121,6 +136,7 @@ Example:
reg = <0x24E00 0xB0>;
interrupts = <12 0x8 13 0x8>;
interrupt-parent = < &ipic >;
fsl,cksel = <1>;
fsl,tclk-period = <10>;
fsl,tmr-prsc = <100>;
fsl,tmr-add = <0x999999A4>;

View file

@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Format: <io>,<irq>,<mode>
See header of drivers/net/hamradio/baycom_ser_hdx.c.
blkdevparts= Manual partition parsing of block device(s) for
embedded devices based on command line input.
See Documentation/block/cmdline-partition.txt
boot_delay= Milliseconds to delay each printk during boot.
Values larger than 10 seconds (10000) are changed to
no delay (0).
@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
pages. In the event, a node is too small to have both
kernelcore and Movable pages, kernelcore pages will
take priority and other nodes will have a larger number
of kernelcore pages. The Movable zone is used for the
of Movable pages. The Movable zone is used for the
allocation of pages that may be reclaimed or moved
by the page migration subsystem. This means that
HugeTLB pages may not be allocated from this zone.

View file

@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x
alc269-dmic Enable ALC269(VA) digital mic workaround
alc271-dmic Enable ALC271X digital mic workaround
inv-dmic Inverted internal mic workaround
headset-mic Indicates a combined headset (headphone+mic) jack
lenovo-dock Enables docking station I/O for some Lenovos
dell-headset-multi Headset jack, which can also be used as mic-in
dell-headset-dock Headset jack (without mic-in), and also dock I/O

View file

@ -237,11 +237,11 @@ F: drivers/platform/x86/acer-wmi.c
ACPI
M: Len Brown <lenb@kernel.org>
M: Rafael J. Wysocki <rjw@sisk.pl>
M: Rafael J. Wysocki <rjw@rjwysocki.net>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
Q: http://patchwork.kernel.org/project/linux-acpi/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
W: https://01.org/linux-acpi
Q: https://patchwork.kernel.org/project/linux-acpi/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
S: Supported
F: drivers/acpi/
F: drivers/pnp/pnpacpi/
@ -256,21 +256,21 @@ F: drivers/pci/*/*/*acpi*
ACPI FAN DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/fan.c
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/*thermal*
ACPI VIDEO DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/video.c
@ -824,15 +824,21 @@ S: Maintained
F: arch/arm/mach-gemini/
ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
M: Barry Song <baohua.song@csr.com>
M: Barry Song <baohua@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
S: Maintained
F: arch/arm/mach-prima2/
F: drivers/clk/clk-prima2.c
F: drivers/clocksource/timer-prima2.c
F: drivers/clocksource/timer-marco.c
F: drivers/dma/sirf-dma.c
F: drivers/i2c/busses/i2c-sirf.c
F: drivers/input/misc/sirfsoc-onkey.c
F: drivers/irqchip/irq-sirfsoc.c
F: drivers/mmc/host/sdhci-sirf.c
F: drivers/pinctrl/sirf/
F: drivers/rtc/rtc-sirfsoc.c
F: drivers/spi/spi-sirf.c
ARM/EBSA110 MACHINE SUPPORT
@ -2294,7 +2300,7 @@ S: Maintained
F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
M: Rafael J. Wysocki <rjw@sisk.pl>
M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Viresh Kumar <viresh.kumar@linaro.org>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
@ -2325,7 +2331,7 @@ S: Maintained
F: drivers/cpuidle/cpuidle-big_little.c
CPUIDLE DRIVERS
M: Rafael J. Wysocki <rjw@sisk.pl>
M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
L: linux-pm@vger.kernel.org
S: Maintained
@ -3547,7 +3553,7 @@ F: fs/freevxfs/
FREEZER
M: Pavel Machek <pavel@ucw.cz>
M: "Rafael J. Wysocki" <rjw@sisk.pl>
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/power/freezing-of-tasks.txt
@ -3618,6 +3624,12 @@ L: linux-scsi@vger.kernel.org
S: Odd Fixes (e.g., new signatures)
F: drivers/scsi/fdomain.*
GCOV BASED KERNEL PROFILING
M: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
S: Maintained
F: kernel/gcov/
F: Documentation/gcov.txt
GDT SCSI DISK ARRAY CONTROLLER DRIVER
M: Achim Leubner <achim_leubner@adaptec.com>
L: linux-scsi@vger.kernel.org
@ -3883,7 +3895,7 @@ F: drivers/video/hgafb.c
HIBERNATION (aka Software Suspend, aka swsusp)
M: Pavel Machek <pavel@ucw.cz>
M: "Rafael J. Wysocki" <rjw@sisk.pl>
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: arch/x86/power/
@ -4333,7 +4345,7 @@ F: drivers/video/i810/
INTEL MENLOW THERMAL DRIVER
M: Sujith Thomas <sujith.thomas@intel.com>
L: platform-driver-x86@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
W: https://01.org/linux-acpi
S: Supported
F: drivers/platform/x86/intel_menlow.c
@ -4470,6 +4482,13 @@ L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/ioc3_serial.c
IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
S: Maintained
F: drivers/iommu/
IP MASQUERADING
M: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
S: Maintained
@ -7271,9 +7290,9 @@ F: include/linux/sched.h
F: include/uapi/linux/sched.h
SCORE ARCHITECTURE
M: Chen Liqin <liqin.chen@sunplusct.com>
M: Chen Liqin <liqin.linux@gmail.com>
M: Lennox Wu <lennox.wu@gmail.com>
W: http://www.sunplusct.com
W: http://www.sunplus.com
S: Supported
F: arch/score/
@ -8082,7 +8101,7 @@ F: drivers/sh/
SUSPEND TO RAM
M: Len Brown <len.brown@intel.com>
M: Pavel Machek <pavel@ucw.cz>
M: "Rafael J. Wysocki" <rjw@sisk.pl>
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/power/
@ -9378,6 +9397,7 @@ F: arch/arm64/include/asm/xen/
XEN NETWORK BACKEND DRIVER
M: Ian Campbell <ian.campbell@citrix.com>
M: Wei Liu <wei.liu2@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: netdev@vger.kernel.org
S: Supported

View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 12
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*

View file

@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
__asm__ __volatile__(
" ex %0, [%1] \n"
: "+r" (tmp)
: "r"(&(lock->slock))
: "memory");
smp_mb();
}

View file

@ -43,7 +43,7 @@
* Because it essentially checks if buffer end is within limit and @len is
* non-ngeative, which implies that buffer start will be within limit too.
*
* The reason for rewriting being, for majorit yof cases, @len is generally
* The reason for rewriting being, for majority of cases, @len is generally
* compile time constant, causing first sub-expression to be compile time
* subsumed.
*
@ -53,7 +53,7 @@
*
*/
#define __user_ok(addr, sz) (((sz) <= TASK_SIZE) && \
(((addr)+(sz)) <= get_fs()))
((addr) <= (get_fs() - (sz))))
#define __access_ok(addr, sz) (unlikely(__kernel_ok) || \
likely(__user_ok((addr), (sz))))

View file

@ -102,7 +102,7 @@ static int genregs_set(struct task_struct *target,
REG_IGNORE_ONE(pad2);
REG_IN_CHUNK(callee, efa, cregs); /* callee_regs[r25..r13] */
REG_IGNORE_ONE(efa); /* efa update invalid */
REG_IN_ONE(stop_pc, &ptregs->ret); /* stop_pc: PC update */
REG_IGNORE_ONE(stop_pc); /* PC updated via @ret */
return ret;
}

View file

@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
{
struct rt_sigframe __user *sf;
unsigned int magic;
int err;
struct pt_regs *regs = current_pt_regs();
/* Always make any pending restarted system calls return -EINTR */
@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
goto badframe;
err = restore_usr_regs(regs, sf);
err |= __get_user(magic, &sf->sigret_magic);
if (err)
if (__get_user(magic, &sf->sigret_magic))
goto badframe;
if (unlikely(is_do_ss_needed(magic)))
if (restore_altstack(&sf->uc.uc_stack))
goto badframe;
if (restore_usr_regs(regs, sf))
goto badframe;
/* Don't restart from sigreturn */
syscall_wont_restart(regs);
@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
if (!sf)
return 1;
/*
* w/o SA_SIGINFO, struct ucontext is partially populated (only
* uc_mcontext/uc_sigmask) for kernel's normal user state preservation
* during signal handler execution. This works for SA_SIGINFO as well
* although the semantics are now overloaded (the same reg state can be
* inspected by userland: but are they allowed to fiddle with it ?
*/
err |= stash_usr_regs(sf, regs, set);
/*
* SA_SIGINFO requires 3 args to signal handler:
* #1: sig-no (common to any handler)
@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
magic = MAGIC_SIGALTSTK;
}
/*
* w/o SA_SIGINFO, struct ucontext is partially populated (only
* uc_mcontext/uc_sigmask) for kernel's normal user state preservation
* during signal handler execution. This works for SA_SIGINFO as well
* although the semantics are now overloaded (the same reg state can be
* inspected by userland: but are they allowed to fiddle with it ?
*/
err |= stash_usr_regs(sf, regs, set);
err |= __put_user(magic, &sf->sigret_magic);
if (err)
return err;

View file

@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
{
struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
clk->cpumask = cpumask_of(cpu);
clockevents_register_device(clk);
clockevents_config_and_register(clk, arc_get_core_freq(),
0, ARC_TIMER_MAX);
/*
* setup the per-cpu timer IRQ handler - for all cpus

View file

@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
regs->status32 &= ~STATUS_DE_MASK;
} else {
regs->ret += state.instr_len;
/* handle zero-overhead-loop */
if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
regs->ret = regs->lp_start;
regs->lp_count--;
}
}
return 0;

View file

@ -296,10 +296,15 @@ archprepare:
# Convert bzImage to zImage
bzImage: zImage
zImage Image xipImage bootpImage uImage: vmlinux
BOOT_TARGETS = zImage Image xipImage bootpImage uImage
INSTALL_TARGETS = zinstall uinstall install
PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
zinstall uinstall install: vmlinux
$(INSTALL_TARGETS):
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
%.dtb: | scripts

View file

@ -95,24 +95,24 @@ initrd:
@test "$(INITRD)" != "" || \
(echo You must specify INITRD; exit -1)
install: $(obj)/Image
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
install:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
$(obj)/Image System.map "$(INSTALL_PATH)"
zinstall: $(obj)/zImage
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
zinstall:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
$(obj)/zImage System.map "$(INSTALL_PATH)"
uinstall: $(obj)/uImage
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
uinstall:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
$(obj)/uImage System.map "$(INSTALL_PATH)"
zi:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
$(obj)/zImage System.map "$(INSTALL_PATH)"
i:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
$(obj)/Image System.map "$(INSTALL_PATH)"
subdir- := bootp compressed dts

View file

@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
bcm28155-ap.dtb

View file

@ -27,6 +27,25 @@
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* Connected to Marvell SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected to FL1009 USB 3.0 controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
@ -57,6 +76,11 @@
marvell,pins = "mpp56";
marvell,function = "gpio";
};
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
};
mdio {
@ -89,22 +113,6 @@
pwm_polarity = <0>;
};
};
pcie-controller {
status = "okay";
/* Connected to Marvell SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected to FL1009 USB 3.0 controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};
@ -160,7 +168,7 @@
button@1 {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 30 1>;
gpios = <&gpio1 30 0>;
};
button@2 {
@ -176,4 +184,11 @@
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
gpios = <&gpio0 8 1>;
};
};

View file

@ -70,6 +70,8 @@
timer@20300 {
compatible = "marvell,armada-xp-timer";
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
};
coreclk: mvebu-sar@18230 {
@ -169,4 +171,13 @@
};
};
};
clocks {
/* 25 MHz reference crystal */
refclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
};

View file

@ -190,12 +190,12 @@
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */
};
pinctrl_uart2_rts: uart2_rts-0 {
pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
};
pinctrl_uart2_cts: uart2_cts-0 {
pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins =
<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
};
@ -556,6 +556,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -567,6 +568,7 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";

View file

@ -181,6 +181,8 @@
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
sirf,uart-dma-rx-channel = <21>;
sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
@ -199,6 +201,8 @@
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
sirf,uart-dma-rx-channel = <6>;
sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
@ -206,7 +210,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
sirf,usp-dma-rx-channel = <17>;
sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
@ -214,7 +221,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
sirf,usp-dma-rx-channel = <14>;
sirf,usp-dma-tx-channel = <15>;
};
dmac0: dma-controller@b00b0000 {
@ -237,6 +247,8 @@
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
interrupts = <14>;
sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {

View file

@ -96,6 +96,11 @@
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
/* Unfortunately we need this since some versions of U-Boot
* on Exynos don't set the CNTFRQ register, so we need the
* value from DT.
*/
clock-frequency = <24000000>;
};
mct@101C0000 {

View file

@ -13,6 +13,7 @@
cpu@0 {
device_type = "cpu";
compatible = "marvell,feroceon";
reg = <0>;
clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
clock-names = "cpu_clk", "ddrclk", "powersave";
};
@ -167,7 +168,7 @@
xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0xd0B00 0x100>;
0x60B00 0x100>;
status = "okay";
clocks = <&gate_clk 16>;

View file

@ -11,7 +11,7 @@
/ {
model = "TI OMAP3 BeagleBoard xM";
compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
cpus {
cpu@0 {

View file

@ -108,7 +108,7 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7f1f>;
pinctrl-single,function-mask = <0xff1f>;
};
omap3_pmx_wkup: pinmux@0x48002a00 {
@ -117,7 +117,7 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7f1f>;
pinctrl-single,function-mask = <0xff1f>;
};
gpio1: gpio@48310000 {

View file

@ -171,7 +171,8 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0xb0000000 0x180000>;
ranges = <0xb0000000 0xb0000000 0x180000>,
<0x56000000 0x56000000 0x1b00000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
@ -196,25 +197,32 @@
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
reg = <0xb0050000 0x1000>;
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
sirf,uart-dma-rx-channel = <21>;
sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
reg = <0xb0060000 0x1000>;
interrupts = <18>;
fifosize = <32>;
clocks = <&clks 14>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
reg = <0xb0070000 0x1000>;
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
sirf,uart-dma-rx-channel = <6>;
sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
@ -222,7 +230,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
sirf,usp-dma-rx-channel = <17>;
sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
@ -230,7 +241,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
sirf,usp-dma-rx-channel = <14>;
sirf,usp-dma-tx-channel = <15>;
};
usp2: usp@b00a0000 {
@ -238,7 +252,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
fifosize = <128>;
clocks = <&clks 30>;
sirf,usp-dma-rx-channel = <10>;
sirf,usp-dma-tx-channel = <11>;
};
dmac0: dma-controller@b00b0000 {
@ -261,6 +278,8 @@
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
interrupts = <14>;
sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {

View file

@ -193,7 +193,7 @@
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a73a4-sdhi";
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
@ -202,7 +202,7 @@
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a73a4-sdhi";
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
@ -211,7 +211,7 @@
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a73a4-sdhi";
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;

View file

@ -96,6 +96,5 @@
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc000 0x118>;
#gpio-range-cells = <3>;
};
};

View file

@ -188,7 +188,6 @@
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
#gpio-range-cells = <3>;
};
thermal@ffc48000 {

View file

@ -148,11 +148,10 @@
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
#gpio-range-cells = <3>;
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
@ -161,7 +160,7 @@
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
@ -170,7 +169,7 @@
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
@ -179,7 +178,7 @@
};
sdhi3: sdhi@ee160000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 168 4>;

View file

@ -196,7 +196,7 @@
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7740-sdhi";
compatible = "renesas,sdhi-r8a7740";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 83 4
@ -208,7 +208,7 @@
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7740-sdhi";
compatible = "renesas,sdhi-r8a7740";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 88 4
@ -219,7 +219,7 @@
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7740-sdhi";
compatible = "renesas,sdhi-r8a7740";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 104 4

View file

@ -20,6 +20,20 @@
# $4 - default install path (blank if root directory)
#
verify () {
if [ ! -f "$1" ]; then
echo "" 1>&2
echo " *** Missing file: $1" 1>&2
echo ' *** You need to run "make" before "make install".' 1>&2
echo "" 1>&2
exit 1
fi
}
# Make sure the files actually exist
verify "$2"
verify "$3"
# User may have a custom install script
if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi

View file

@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
.ccnt = 1,
};
static const struct of_device_id edma_of_ids[] = {
{ .compatible = "ti,edma3", },
{}
};
/*****************************************************************************/
static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
static int prepare_unused_channel_list(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
int i, ctlr;
int i, count, ctlr;
struct of_phandle_args dma_spec;
if (dev->of_node) {
count = of_property_count_strings(dev->of_node, "dma-names");
if (count < 0)
return 0;
for (i = 0; i < count; i++) {
if (of_parse_phandle_with_args(dev->of_node, "dmas",
"#dma-cells", i,
&dma_spec))
continue;
if (!of_match_node(edma_of_ids, dma_spec.np)) {
of_node_put(dma_spec.np);
continue;
}
clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
edma_cc[0]->edma_unused);
of_node_put(dma_spec.np);
}
return 0;
}
/* For non-OF case */
for (i = 0; i < pdev->num_resources; i++) {
if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
(int)pdev->resource[i].start >= 0) {
ctlr = EDMA_CTLR(pdev->resource[i].start);
clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
edma_cc[ctlr]->edma_unused);
edma_cc[ctlr]->edma_unused);
}
}
@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
return 0;
}
static const struct of_device_id edma_of_ids[] = {
{ .compatible = "ti,edma3", },
{}
};
static struct platform_driver edma_driver = {
.driver = {
.name = "edma",

View file

@ -51,7 +51,8 @@ void mcpm_cpu_power_down(void)
{
phys_reset_t phys_reset;
BUG_ON(!platform_ops);
if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
return;
BUG_ON(!irqs_disabled());
/*
@ -93,7 +94,8 @@ void mcpm_cpu_suspend(u64 expected_residency)
{
phys_reset_t phys_reset;
BUG_ON(!platform_ops);
if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
return;
BUG_ON(!irqs_disabled());
/* Very similar to mcpm_cpu_power_down() */

View file

@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/string.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/memory.h>
/*
* Certain hardware parameters determined at the time of device manufacture,
@ -25,8 +26,10 @@
*/
#ifdef CONFIG_ARCH_SA1100
#define PARAM_BASE 0xe8ffc000
#define param_start(x) (void *)(x)
#else
#define PARAM_BASE 0xa0000a00
#define param_start(x) __va(x)
#endif
#define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 ) | ( b << 8 ) | a )
@ -41,7 +44,7 @@ EXPORT_SYMBOL(sharpsl_param);
void sharpsl_save_param(void)
{
memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
sharpsl_param.comadj=-1;

View file

@ -135,6 +135,7 @@ CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_OMAP=y

View file

@ -31,5 +31,4 @@ generic-y += termbits.h
generic-y += termios.h
generic-y += timex.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += unaligned.h

View file

@ -16,7 +16,7 @@
static __always_inline bool arch_static_branch(struct static_key *key)
{
asm goto("1:\n\t"
asm_volatile_goto("1:\n\t"
JUMP_LABEL_NOP "\n\t"
".pushsection __jump_table, \"aw\"\n\t"
".word 1b, %l[l_yes], %c0\n\t"

View file

@ -76,8 +76,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster);
*
* This must be called with interrupts disabled.
*
* This does not return. Re-entry in the kernel is expected via
* mcpm_entry_point.
* On success this does not return. Re-entry in the kernel is expected
* via mcpm_entry_point.
*
* This will return if mcpm_platform_register() has not been called
* previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_power_down(void);
@ -98,8 +101,11 @@ void mcpm_cpu_power_down(void);
*
* This must be called with interrupts disabled.
*
* This does not return. Re-entry in the kernel is expected via
* mcpm_entry_point.
* On success this does not return. Re-entry in the kernel is expected
* via mcpm_entry_point.
*
* This will return if mcpm_platform_register() has not been called
* previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_suspend(u64 expected_residency);

View file

@ -57,6 +57,9 @@ static inline void syscall_get_arguments(struct task_struct *task,
unsigned int i, unsigned int n,
unsigned long *args)
{
if (n == 0)
return;
if (i + n > SYSCALL_MAX_ARGS) {
unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@ -81,6 +84,9 @@ static inline void syscall_set_arguments(struct task_struct *task,
unsigned int i, unsigned int n,
const unsigned long *args)
{
if (n == 0)
return;
if (i + n > SYSCALL_MAX_ARGS) {
pr_warning("%s called with max args %d, handling only %d\n",
__func__, i + n, SYSCALL_MAX_ARGS);

View file

@ -487,7 +487,26 @@ __fixup_smp:
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
and r0, r0, #0xc0000000 @ multiprocessing extensions and
teq r0, #0x80000000 @ not part of a uniprocessor system?
moveq pc, lr @ yes, assume SMP
bne __fixup_smp_on_up @ no, assume UP
@ Core indicates it is SMP. Check for Aegis SOC where a single
@ Cortex-A9 CPU is present but SMP operations fault.
mov r4, #0x41000000
orr r4, r4, #0x0000c000
orr r4, r4, #0x00000090
teq r3, r4 @ Check for ARM Cortex-A9
movne pc, lr @ Not ARM Cortex-A9,
@ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
@ below address check will need to be #ifdef'd or equivalent
@ for the Aegis platform.
mrc p15, 4, r0, c15, c0 @ get SCU base address
teq r0, #0x0 @ '0' on actual UP A9 hardware
beq __fixup_smp_on_up @ So its an A9 UP
ldr r0, [r0, #4] @ read SCU Config
and r0, r0, #0x3 @ number of CPUs
teq r0, #0x0 @ is 1?
movne pc, lr
__fixup_smp_on_up:
adr r0, 1f

View file

@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = {
*/
int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
{
struct kvm_regs *cpu_reset;
struct kvm_regs *reset_regs;
const struct kvm_irq_level *cpu_vtimer_irq;
switch (vcpu->arch.target) {
case KVM_ARM_TARGET_CORTEX_A15:
if (vcpu->vcpu_id > a15_max_cpu_idx)
return -EINVAL;
cpu_reset = &a15_regs_reset;
reset_regs = &a15_regs_reset;
vcpu->arch.midr = read_cpuid_id();
cpu_vtimer_irq = &a15_vtimer_irq;
break;
@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
}
/* Reset core registers */
memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
/* Reset CP15 registers */
kvm_reset_coprocs(vcpu);

View file

@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91rm9200_timer_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};

View file

@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
static struct irqaction at91sam926x_pit_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91sam926x_pit_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};

View file

@ -16,11 +16,17 @@
#include "at91_rstc.h"
.arm
/*
* at91_ramc_base is an array void*
* init at NULL if only one DDR controler is present in or DT
*/
.globl at91sam9g45_restart
at91sam9g45_restart:
ldr r5, =at91_ramc_base @ preload constants
ldr r0, [r5]
ldr r5, [r5, #4] @ ddr1
cmp r5, #0
ldr r4, =at91_rstc_base
ldr r1, [r4]
@ -30,6 +36,8 @@ at91sam9g45_restart:
.balign 32 @ align to cache line
strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access
strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1
str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access
str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0
str r4, [r1, #AT91_RSTC_CR] @ reset processor

View file

@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
static struct irqaction at91x40_timer_irq = {
.name = "at91_tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.flags = IRQF_TIMER,
.handler = at91x40_timer_interrupt
};

View file

@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
.context = (void *)0x7f00,
};
static struct snd_platform_data dm365_evm_snd_data = {
static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
.asp_chan_q = EVENTQ_3,
};

View file

@ -15,8 +15,6 @@
#include <mach/hardware.h>
#include <linux/platform_device.h>
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
@ -39,6 +37,8 @@
#define UART_DM646X_SCR_TX_WATERMARK 0x08
#ifndef __ASSEMBLY__
#include <linux/platform_device.h>
extern int davinci_serial_init(struct platform_device *);
#endif

View file

@ -1,2 +1,9 @@
/* Simple oneliner include to the PCIv3 early init */
#ifdef CONFIG_PCI
extern int pci_v3_early_init(void);
#else
static inline int pci_v3_early_init(void)
{
return 0;
}
#endif

View file

@ -140,6 +140,7 @@ int __init coherency_init(void)
coherency_base = of_iomap(np, 0);
coherency_cpu_base = of_iomap(np, 1);
set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
of_node_put(np);
}
return 0;
@ -147,9 +148,14 @@ int __init coherency_init(void)
static int __init coherency_late_init(void)
{
if (of_find_matching_node(NULL, of_coherency_table))
struct device_node *np;
np = of_find_matching_node(NULL, of_coherency_table);
if (np) {
bus_register_notifier(&platform_bus_type,
&mvebu_hwcc_platform_nb);
of_node_put(np);
}
return 0;
}

View file

@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
pr_info("Initializing Power Management Service Unit\n");
pmsu_mp_base = of_iomap(np, 0);
pmsu_reset_base = of_iomap(np, 1);
of_node_put(np);
}
return 0;

View file

@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
BUG_ON(!match);
system_controller_base = of_iomap(np, 0);
mvebu_sc = (struct mvebu_system_controller *)match->data;
of_node_put(np);
}
return 0;

View file

@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
static const char *omap36xx_boards_compat[] __initdata = {
"ti,omap36xx",
NULL,
};
DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = omap36xx_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
"timll,omap3-devkit8000",

View file

@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
.name = "lp5523:kb1",
.chan_nr = 0,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:kb2",
.chan_nr = 1,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:kb3",
.chan_nr = 2,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:kb4",
.chan_nr = 3,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:b",
.chan_nr = 4,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:g",
.chan_nr = 5,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:r",
.chan_nr = 6,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:kb5",
.chan_nr = 7,
.led_current = 50,
.max_current = 100,
}, {
.name = "lp5523:kb6",
.chan_nr = 8,
.led_current = 50,
.max_current = 100,
}
};

View file

@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
struct gpmc_timings t;
int ret;
if (gpmc_onenand_data->of_node)
if (gpmc_onenand_data->of_node) {
gpmc_read_settings_dt(gpmc_onenand_data->of_node,
&onenand_async);
if (onenand_async.sync_read || onenand_async.sync_write) {
if (onenand_async.sync_write)
gpmc_onenand_data->flags |=
ONENAND_SYNC_READWRITE;
else
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
onenand_async.sync_read = false;
onenand_async.sync_write = false;
}
}
omap2_onenand_set_async_mode(onenand_base);

View file

@ -28,7 +28,7 @@
#define OMAP_PULL_UP (1 << 4)
#define OMAP_ALTELECTRICALSEL (1 << 5)
/* 34xx specific mux bit defines */
/* omap3/4/5 specific mux bit defines */
#define OMAP_INPUT_EN (1 << 8)
#define OMAP_OFF_EN (1 << 9)
#define OMAP_OFFOUT_EN (1 << 10)
@ -36,8 +36,6 @@
#define OMAP_OFF_PULL_EN (1 << 12)
#define OMAP_OFF_PULL_UP (1 << 13)
#define OMAP_WAKEUP_EN (1 << 14)
/* 44xx specific mux bit defines */
#define OMAP_WAKEUP_EVENT (1 << 15)
/* Active pin states */

View file

@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void)
#endif /* CONFIG_HAVE_ARM_TWD */
#endif /* CONFIG_ARCH_OMAP4 */
#ifdef CONFIG_SOC_OMAP5
#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
void __init omap5_realtime_timer_init(void)
{
omap4_sync32k_timer_init();
@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void)
clocksource_of_init();
}
#endif /* CONFIG_SOC_OMAP5 */
#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
/**
* omap_timer_init - build and register timer device with an

View file

@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
"fsib_mclk_in", "fsib"),
/* GETHER */
PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
"gether_mii", "gether"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
"gether_int", "gether"),
/* HDMI */
PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",

View file

@ -29,6 +29,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void)
&ether_pdata, sizeof(ether_pdata));
}
/*
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int lager_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init lager_init(void)
{
lager_add_standard_devices();
phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
}
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
NULL,
@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
.init_machine = lager_add_standard_devices,
.init_machine = lager_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END

View file

@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency)
} else
BUG();
/*
* If the CPU is committed to power down, make sure
* the power controller will be in charge of waking it
* up upon IRQ, ie IRQ lines are cut from GIC CPU IF
* to the CPU by disabling the GIC CPU IF to prevent wfi
* from completing execution behind power controller back
*/
if (!skip_wfi)
gic_cpu_if_down();
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
arch_spin_unlock(&tc2_pm_lock);
@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency)
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
gic_cpu_if_down();
tc2_pm_down(residency);
}

View file

@ -1232,7 +1232,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
break;
len = (j - i) << PAGE_SHIFT;
ret = iommu_map(mapping->domain, iova, phys, len, 0);
ret = iommu_map(mapping->domain, iova, phys, len,
IOMMU_READ|IOMMU_WRITE);
if (ret < 0)
goto fail;
iova += len;
@ -1431,6 +1432,27 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
GFP_KERNEL);
}
static int __dma_direction_to_prot(enum dma_data_direction dir)
{
int prot;
switch (dir) {
case DMA_BIDIRECTIONAL:
prot = IOMMU_READ | IOMMU_WRITE;
break;
case DMA_TO_DEVICE:
prot = IOMMU_READ;
break;
case DMA_FROM_DEVICE:
prot = IOMMU_WRITE;
break;
default:
prot = 0;
}
return prot;
}
/*
* Map a part of the scatter-gather list into contiguous io address space
*/
@ -1444,6 +1466,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
int ret = 0;
unsigned int count;
struct scatterlist *s;
int prot;
size = PAGE_ALIGN(size);
*handle = DMA_ERROR_CODE;
@ -1460,7 +1483,9 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
ret = iommu_map(mapping->domain, iova, phys, len, 0);
prot = __dma_direction_to_prot(dir);
ret = iommu_map(mapping->domain, iova, phys, len, prot);
if (ret < 0)
goto fail;
count += len >> PAGE_SHIFT;
@ -1665,19 +1690,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p
if (dma_addr == DMA_ERROR_CODE)
return dma_addr;
switch (dir) {
case DMA_BIDIRECTIONAL:
prot = IOMMU_READ | IOMMU_WRITE;
break;
case DMA_TO_DEVICE:
prot = IOMMU_READ;
break;
case DMA_FROM_DEVICE:
prot = IOMMU_WRITE;
break;
default:
prot = 0;
}
prot = __dma_direction_to_prot(dir);
ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot);
if (ret < 0)

View file

@ -17,7 +17,6 @@
#include <linux/nodemask.h>
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/of_reserved_mem.h>
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
@ -379,8 +378,6 @@ void __init arm_memblock_init(struct meminfo *mi,
if (mdesc->reserve)
mdesc->reserve();
early_init_dt_scan_reserved_mem();
/*
* reserve memory for DMA contigouos allocations,
* must come from DMA area inside low memory

View file

@ -6,13 +6,6 @@ config FRAME_POINTER
bool
default y
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL
help
Enables the display of the minimum amount of free stack which each
task has ever had available in the sysrq-T output.
config EARLY_PRINTK
bool "Early printk support"
default y

View file

@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_BLK_DEV is not set
CONFIG_BLK_DEV=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
@ -72,6 +72,7 @@ CONFIG_LOGO=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_FUSE_FS=y
@ -90,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_BLK=y

View file

@ -166,9 +166,10 @@ do { \
#define get_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ? \
__get_user((x), (ptr)) : \
access_ok(VERIFY_READ, __p, sizeof(*__p)) ? \
__get_user((x), __p) : \
((x) = 0, -EFAULT); \
})
@ -227,9 +228,10 @@ do { \
#define put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ? \
__put_user((x), (ptr)) : \
access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ? \
__put_user((x), __p) : \
-EFAULT; \
})

View file

@ -80,8 +80,10 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
preempt_disable();
memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
fpsimd_load_state(&current->thread.fpsimd_state);
preempt_enable();
}
#ifdef CONFIG_KERNEL_MODE_NEON

View file

@ -35,7 +35,7 @@
*/
ENTRY(__cpu_flush_user_tlb_range)
vma_vm_mm x3, x2 // get vma->vm_mm
mmid x3, x3 // get vm_mm->context.id
mmid w3, x3 // get vm_mm->context.id
dsb sy
lsr x0, x0, #12 // align address
lsr x1, x1, #12

View file

@ -1,5 +1,19 @@
generic-y += clkdev.h
generic-y += cputime.h
generic-y += delay.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += exec.h
generic-y += trace_clock.h
generic-y += futex.h
generic-y += irq_regs.h
generic-y += param.h
generic-y += local.h
generic-y += local64.h
generic-y += percpu.h
generic-y += scatterlist.h
generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += xor.h

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_CPUTIME_H
#define __ASM_AVR32_CPUTIME_H
#include <asm-generic/cputime.h>
#endif /* __ASM_AVR32_CPUTIME_H */

View file

@ -1 +0,0 @@
#include <asm-generic/delay.h>

View file

@ -1,7 +0,0 @@
/*
* Arch specific extensions to struct device
*
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_DIV64_H
#define __ASM_AVR32_DIV64_H
#include <asm-generic/div64.h>
#endif /* __ASM_AVR32_DIV64_H */

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
#define __ASM_AVR32_EMERGENCY_RESTART_H
#include <asm-generic/emergency-restart.h>
#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_FUTEX_H
#define __ASM_AVR32_FUTEX_H
#include <asm-generic/futex.h>
#endif /* __ASM_AVR32_FUTEX_H */

View file

@ -1 +0,0 @@
#include <asm-generic/irq_regs.h>

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_LOCAL_H
#define __ASM_AVR32_LOCAL_H
#include <asm-generic/local.h>
#endif /* __ASM_AVR32_LOCAL_H */

View file

@ -1 +0,0 @@
#include <asm-generic/local64.h>

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_PERCPU_H
#define __ASM_AVR32_PERCPU_H
#include <asm-generic/percpu.h>
#endif /* __ASM_AVR32_PERCPU_H */

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_SCATTERLIST_H
#define __ASM_AVR32_SCATTERLIST_H
#include <asm-generic/scatterlist.h>
#endif /* __ASM_AVR32_SCATTERLIST_H */

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_SECTIONS_H
#define __ASM_AVR32_SECTIONS_H
#include <asm-generic/sections.h>
#endif /* __ASM_AVR32_SECTIONS_H */

View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_TOPOLOGY_H
#define __ASM_AVR32_TOPOLOGY_H
#include <asm-generic/topology.h>
#endif /* __ASM_AVR32_TOPOLOGY_H */

View file

@ -1,6 +0,0 @@
#ifndef _ASM_XOR_H
#define _ASM_XOR_H
#include <asm-generic/xor.h>
#endif

View file

@ -289,7 +289,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
memset(childregs, 0, sizeof(struct pt_regs));
p->thread.cpu_context.r0 = arg;
p->thread.cpu_context.r1 = usp; /* fn */
p->thread.cpu_context.r2 = syscall_return;
p->thread.cpu_context.r2 = (unsigned long)syscall_return;
p->thread.cpu_context.pc = (unsigned long)ret_from_kernel_thread;
childregs->sr = MODE_SUPERVISOR;
} else {

View file

@ -98,7 +98,14 @@ static void comparator_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_SHUTDOWN:
sysreg_write(COMPARE, 0);
pr_debug("%s: stop\n", evdev->name);
cpu_idle_poll_ctrl(false);
if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
evdev->mode == CLOCK_EVT_MODE_RESUME) {
/*
* Only disable idle poll if we have forced that
* in a previous call.
*/
cpu_idle_poll_ctrl(false);
}
break;
default:
BUG();

View file

@ -276,7 +276,7 @@ static struct platform_device mtx1_pci_host = {
.resource = alchemy_pci_host_res,
};
static struct __initdata platform_device * mtx1_devs[] = {
static struct platform_device *mtx1_devs[] __initdata = {
&mtx1_pci_host,
&mtx1_gpio_leds,
&mtx1_wdt,

View file

@ -22,7 +22,7 @@
static __always_inline bool arch_static_branch(struct static_key *key)
{
asm goto("1:\tnop\n\t"
asm_volatile_goto("1:\tnop\n\t"
"nop\n\t"
".pushsection __jump_table, \"aw\"\n\t"
WORD_INSN " 1b, %l[l_yes], %0\n\t"

View file

@ -73,7 +73,7 @@
3:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
PTR_L t8, __stack_chk_guard
PTR_LA t8, __stack_chk_guard
LONG_L t9, TASK_STACK_CANARY(a1)
LONG_S t9, 0(t8)
#endif

View file

@ -67,7 +67,7 @@ LEAF(resume)
1:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
PTR_L t8, __stack_chk_guard
PTR_LA t8, __stack_chk_guard
LONG_L t9, TASK_STACK_CANARY(a1)
LONG_S t9, 0(t8)
#endif

View file

@ -69,7 +69,7 @@
1:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
PTR_L t8, __stack_chk_guard
PTR_LA t8, __stack_chk_guard
LONG_L t9, TASK_STACK_CANARY(a1)
LONG_S t9, 0(t8)
#endif

View file

@ -609,6 +609,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
r4k_blast_scache();
else
blast_scache_range(addr, addr + size);
preempt_enable();
__sync();
return;
}
@ -650,6 +651,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
*/
blast_inv_scache_range(addr, addr + size);
}
preempt_enable();
__sync();
return;
}

View file

@ -6,7 +6,7 @@ struct pt_regs;
/* traps.c */
void parisc_terminate(char *msg, struct pt_regs *regs,
int code, unsigned long offset);
int code, unsigned long offset) __noreturn __cold;
/* mm/fault.c */
void do_page_fault(struct pt_regs *regs, unsigned long code,

View file

@ -602,6 +602,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
}
}
EXPORT_SYMBOL_GPL(flush_cache_page);
#ifdef CONFIG_PARISC_TMPALIAS

View file

@ -72,7 +72,6 @@ enum ipi_message_type {
IPI_NOP=0,
IPI_RESCHEDULE=1,
IPI_CALL_FUNC,
IPI_CALL_FUNC_SINGLE,
IPI_CPU_START,
IPI_CPU_STOP,
IPI_CPU_TEST
@ -164,11 +163,6 @@ ipi_interrupt(int irq, void *dev_id)
generic_smp_call_function_interrupt();
break;
case IPI_CALL_FUNC_SINGLE:
smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu);
generic_smp_call_function_single_interrupt();
break;
case IPI_CPU_START:
smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_START\n", this_cpu);
break;
@ -260,7 +254,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
void arch_send_call_function_single_ipi(int cpu)
{
send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
send_IPI_single(cpu, IPI_CALL_FUNC);
}
/*

View file

@ -291,11 +291,6 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
do_exit(SIGSEGV);
}
int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs)
{
return syscall(regs);
}
/* gdb uses break 4,8 */
#define GDB_BREAK_INSN 0x10004
static void handle_gdb_break(struct pt_regs *regs, int wot)
@ -805,14 +800,14 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
else {
/*
* The kernel should never fault on its own address space.
* The kernel should never fault on its own address space,
* unless pagefault_disable() was called before.
*/
if (fault_space == 0)
if (fault_space == 0 && !in_atomic())
{
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC);
parisc_terminate("Kernel Fault", regs, code, fault_address);
}
}

View file

@ -56,7 +56,7 @@
#ifdef __KERNEL__
#include <linux/module.h>
#include <linux/compiler.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
#define s_space "%%sr1"
#define d_space "%%sr2"
#else
@ -524,4 +524,17 @@ EXPORT_SYMBOL(copy_to_user);
EXPORT_SYMBOL(copy_from_user);
EXPORT_SYMBOL(copy_in_user);
EXPORT_SYMBOL(memcpy);
long probe_kernel_read(void *dst, const void *src, size_t size)
{
unsigned long addr = (unsigned long)src;
if (size < 0 || addr < PAGE_SIZE)
return -EFAULT;
/* check for I/O space F_EXTEND(0xfff00000) access as well? */
return __probe_kernel_read(dst, src, size);
}
#endif

Some files were not shown because too many files have changed in this diff Show more