From ebf24414809200915b9ddf7f109bba7c278c8210 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 2 Mar 2016 07:29:29 -0800 Subject: [PATCH 01/18] ARM: OMAP2+: Use srst_udelay for USB on dm814x Without this booting t410 can fail randomly with no output depending on the .config options chosen. Enabling debug_ll causes the problem to go away. I narrowed this down to USB by disabling one module at a time. Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index f8cc40021729..743a2a2183a0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -546,9 +546,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = { .user = OCP_USER_MPU, }; +/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */ static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = { .rev_offs = 0x0, .sysc_offs = 0x10, + .srst_udelay = 2, .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | SYSC_HAS_SOFTRESET, .idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART, From 3ca4a238106dedc285193ee47f494a6584b6fd2f Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Sat, 26 Mar 2016 23:08:55 -0600 Subject: [PATCH 02/18] ARM: OMAP2+: hwmod: Fix updating of sysconfig register Commit 127500ccb766f ("ARM: OMAP2+: Only write the sysconfig on idle when necessary") talks about verification of sysconfig cache value before updating it, only during idle path. But the patch is adding the verification in the enable path. So, adding the check in a proper place as per the commit description. Not keeping this check during enable path as there is a chance of losing context and it is safe to do on idle as the context of the register will never be lost while the device is active. Signed-off-by: Lokesh Vutla Acked-by: Tero Kristo Cc: Jon Hunter Cc: # 3.12+ Fixes: commit 127500ccb766 "ARM: OMAP2+: Only write the sysconfig on idle when necessary" [paul@pwsan.com: appears to have been caused by my own mismerge of the originally posted patch] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b6d62e4cdfdd..2af6ff63e3b4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If the cached value is the same as the new value, skip the write */ - if (oh->_sysc_cache != v) - _write_sysconfig(v, oh); + _write_sysconfig(v, oh); /* * Set the autoidle bit only after setting the smartidle bit @@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - _write_sysconfig(v, oh); + /* If the cached value is the same as the new value, skip the write */ + if (oh->_sysc_cache != v) + _write_sysconfig(v, oh); } /** From 4c35430ad18f5a034302cb90e559ede5a27f93b9 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Wed, 9 Mar 2016 00:46:11 +0100 Subject: [PATCH 03/18] ARM: pxa: fix the number of DMA requestor lines The number of requestor lines was clamped to 0 for all pxa architectures in the requestor declaration. Fix this by using the value. Fixes: 72b195cb7162 ("ARM: pxa: add the number of DMA requestor lines") Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/devices.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 913a319c7b00..fffb697bbf0e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = { void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors) { pxa_dma_pdata.dma_channels = nb_channels; + pxa_dma_pdata.nb_requestors = nb_requestors; pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata); } From 427b1d3faa448212337c599e5454325af64e9a8e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 21 Mar 2016 09:50:37 +0100 Subject: [PATCH 04/18] ARM: u8500_defconfig: turn on the Synaptics RMI4 driver The Ux500 boards may have an RMI4 unit, and the DT fragments for them have been merged upstream. Add it to the defconfig. Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/configs/u8500_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 07055eacbb0f..a691d590fbd1 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_BU21013=y CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y +CONFIG_RMI4_CORE=y +CONFIG_RMI4_I2C=y +CONFIG_RMI4_F11=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set From e6cc3be552f9fedf5fa6b37c285d7d27ffc08b03 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Sun, 28 Feb 2016 13:07:17 +0530 Subject: [PATCH 05/18] arm64: dts: vulcan: Update PCI ranges The PCI memory windows available in vulcan.dtsi are limited to 128MB for 32-bit BARs, and 4GB for 64-bit BARs. Given the memory mapped IO space available in arm64, these windows can be increased substantially to support more use cases. The change increases the 32-bit window to 256MB and the 64-bit window to 128 GB. The firmware on vulcan boards will use these ranges as well. PCI IO windows are not supported on Vulcan, so remove them instead of keeping an unused value. Signed-off-by: Jayachandran C Signed-off-by: Florian Fainelli Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/broadcom/vulcan.dtsi | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi index c49b5a85809c..85820e2bca9d 100644 --- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi +++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi @@ -108,12 +108,15 @@ reg = <0x0 0x30000000 0x0 0x10000000>; reg-names = "PCI ECAM"; - /* IO 0x4000_0000 - 0x4001_0000 */ - ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000 - /* MEM 0x4800_0000 - 0x5000_0000 */ - 0x02000000 0 0x48000000 0 0x48000000 0 0x08000000 - /* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */ - 0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>; + /* + * PCI ranges: + * IO no supported + * MEM 0x4000_0000 - 0x6000_0000 + * MEM64 pref 0x40_0000_0000 - 0x60_0000_0000 + */ + ranges = + <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000 + 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>; interrupt-map-mask = <0 0 0 7>; interrupt-map = /* addr pin ic icaddr icintr */ From 77644ad86abd205742937010fa1cf4795e927212 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 15 Mar 2016 11:03:39 +0100 Subject: [PATCH 06/18] bus: mvebu-mbus: use %pa to print phys_addr_t A recent change to the mbus driver added a warning printk that prints a phys_addr_t using the %x format string, which fails in case we build with 64-bit phys_addr_t: drivers/bus/mvebu-mbus.c: In function 'mvebu_mbus_get_dram_win_info': drivers/bus/mvebu-mbus.c:975:9: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=] This uses the special %pa format string instead, so we always print the correct type. Signed-off-by: Arnd Bergmann Fixes: f2900acea801 ("bus: mvebu-mbus: provide api for obtaining IO and DRAM window information") Signed-off-by: Gregory CLEMENT --- drivers/bus/mvebu-mbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index c2e52864bb03..ce54a0160faa 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -972,7 +972,7 @@ int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr) } } - pr_err("invalid dram address 0x%x\n", phyaddr); + pr_err("invalid dram address %pa\n", &phyaddr); return -EINVAL; } EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info); From 199831c77c50e6913e893b6bc268ba9f4a9a2bf8 Mon Sep 17 00:00:00 2001 From: Patrick Uiterwijk Date: Tue, 29 Mar 2016 16:57:40 +0000 Subject: [PATCH 07/18] ARM: mvebu: Correct unit address for linksys The USB2 port for Armada 38x is defined to be at 58000, not at 50000. Cc: Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by: Patrick Uiterwijk Acked-by: Imre Kaloz Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 3710755c6d76..85d2c377c332 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -117,7 +117,7 @@ }; /* USB part of the eSATA/USB 2.0 port */ - usb@50000 { + usb@58000 { status = "okay"; }; From b60e1157d8faa7a44556fcda2d4f06e71e839fd3 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Wed, 23 Mar 2016 10:13:59 +0100 Subject: [PATCH 08/18] ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Carlo Caione Reviewed-by: Andreas Färber Tested-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 57 +++++++++++++++++++--------------- arch/arm/boot/dts/meson8b.dtsi | 12 +++++-- 2 files changed, 42 insertions(+), 27 deletions(-) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index a2ddcb8c545a..45619f6162c5 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -91,8 +91,8 @@ clock-frequency = <141666666>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -108,29 +108,6 @@ #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - - i2c_ao_pins: i2c_mst_ao { - mux { - groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; - function = "i2c_mst_ao"; - }; - }; - spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; @@ -157,4 +134,34 @@ }; }; + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 8bad5571af46..2bfe401a4da9 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -155,8 +155,8 @@ reg = <0xc1108000 0x4>, <0xc1104000 0x460>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8b-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -171,6 +171,14 @@ gpio-controller; #gpio-cells = <2>; }; + }; + + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; gpio_ao: ao-bank@c1108030 { reg = <0xc8100014 0x4>, From 11ca873574c2314de9f0cf1adf8b3be88e4e19ae Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Wed, 23 Mar 2016 10:14:00 +0100 Subject: [PATCH 09/18] documentation: Fix pinctrl documentation for Meson8 / Meson8b Fix pin controller documentation introducing the new compatibles for the pinctrl drivers specific for aobus / cbus. This is needed because we have changed the pin controller driver: we have now a single specialized pinctrl driver / compatible for each bus the controller is attached to, instead of one single driver dealing with all the controllers we have on different buses. Signed-off-by: Carlo Caione Acked-by: Rob Herring --- .../bindings/pinctrl/meson,pinctrl.txt | 38 ++++--------------- 1 file changed, 7 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 3f6a524cc5ff..32f4a2d6d0b3 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -1,13 +1,16 @@ == Amlogic Meson pinmux controller == Required properties for the root node: - - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" + - compatible: one of "amlogic,meson8-cbus-pinctrl" + "amlogic,meson8b-cbus-pinctrl" + "amlogic,meson8-aobus-pinctrl" + "amlogic,meson8b-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === -The 2 power domains of the controller (regular and always-on) are -represented as sub-nodes and each of them acts as a GPIO controller. +The GPIO bank for the controller is represented as a sub-node and it acts as a +GPIO controller. Required properties for sub-nodes are: - reg: should contain address and size for mux, pull-enable, pull and @@ -18,10 +21,6 @@ Required properties for sub-nodes are: - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 -Valid sub-node names are: - - "banks" for the regular domain - - "ao-bank" for the always-on domain - === Other sub-nodes === Child nodes without the "gpio-controller" represent some desired @@ -45,7 +44,7 @@ pinctrl-bindings.txt === Example === pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -61,15 +60,6 @@ pinctrl-bindings.txt #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - nand { mux { groups = "nand_io", "nand_io_ce0", "nand_io_ce1", @@ -79,18 +69,4 @@ pinctrl-bindings.txt function = "nand"; }; }; - - uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a", - "uart_cts_ao_a", "uart_rts_ao_a"; - function = "uart_ao"; - }; - - conf { - pins = "GPIOAO_0", "GPIOAO_1", - "GPIOAO_2", "GPIOAO_3"; - bias-disable; - }; - }; }; From 456e8d53482537616899a146b706eccd095404e6 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 11 Mar 2016 10:12:28 -0600 Subject: [PATCH 10/18] ARM: OMAP2: Fix up interconnect barrier initialization for DRA7 The following commits: commit 3fa609755c11 ("ARM: omap2: restore OMAP4 barrier behaviour") commit f746929ffdc8 ("Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"") and commit ea827ad5ffbb ("ARM: DRA7: Provide proper IO map table") came in around the same time, unfortunately this seem to have missed initializing the barrier for DRA7 platforms - omap5_map_io was reused for dra7 till it was split out by the last patch. barrier_init needs to be hence carried forward as it is valid for DRA7 family of processors as they are for OMAP5. Fixes: ea827ad5ffbb7 ("ARM: DRA7: Provide proper IO map table") Cc: stable@vger.kernel.org # v4.1+ Reported-by: Laurent Pinchart Reported-by: Tomi Valkeinen Cc: Russell King Signed-off-by: Nishanth Menon Reviewed-by: Laurent Pinchart Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3c87e40650cf..9821be6dfd5e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -368,6 +368,7 @@ void __init omap5_map_io(void) void __init dra7xx_map_io(void) { iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc)); + omap_barriers_init(); } #endif /* From cfe1580a6415bc37fd62d79eb8102a618f7650b2 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 8 Mar 2016 12:24:35 +0530 Subject: [PATCH 11/18] ARM: dts: AM43x-epos: Fix clk parent for synctimer commit 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") makes synctimer32k as the clocksource on AM43xx. By default the synctimer32k is clocked by 32K RTC OSC on AM43xx. But this 32K RTC OSC is not available on epos boards which makes it fail to boot. Synctimer32k can also be clocked by a peripheral PLL, so making this as clock parent for synctimer3k on epos boards. Fixes: 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Nishanth Menon Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 83dfafaaba1b..d5dd72047a7e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -794,3 +794,8 @@ tx-num-evt = <32>; rx-num-evt = <32>; }; + +&synctimer_32kclk { + assigned-clocks = <&mux_synctimer32k_ck>; + assigned-clock-parents = <&clkdiv32k_ick>; +}; From d41676ddddef27224a398609d874055866694cfa Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 14 Mar 2016 11:01:50 +0200 Subject: [PATCH 12/18] ARM: dts: am43xx: fix edma memcpy channel allocation EDMA was allocating DMA channels 32 and 33 for memcpy usage, out of which channel 33 is actually used by DES crypto engine. This bad allocation of the channel causes a crash in the DES crypto engine, as the channel gets configured for memcpy usage instead of hardware <-> memory DMA. Fixed by allocating DMA channels 58 and 59 for memcpy usage (I2C0 RX/TX), which are not used by anybody. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Tero Kristo Suggested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 6e4f5af3d8f8..344b861a55a5 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -207,7 +207,7 @@ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, <&edma_tptc2 0>; - ti,edma-memcpy-channels = <32 33>; + ti,edma-memcpy-channels = <58 59>; }; edma_tptc0: tptc@49800000 { From 6b532c4a66f44aaf5aa0dbea6aadd44981478025 Mon Sep 17 00:00:00 2001 From: Vishal Mahaveer Date: Wed, 9 Mar 2016 14:56:31 -0600 Subject: [PATCH 13/18] ARM: DRA722: Add ID detect for Silicon Rev 2.0 Silicon Rev 2.0 is a minor variant of Rev 1.0. Rev 2.0 is an incremental revision with various fixes including the following: - Reset logic fixes - Few asymmetric aging logic fixes - Ethernet speed fixes - EDMA fixes for McASP Signed-off-by: Vishal Mahaveer Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 4 ++-- arch/arm/mach-omap2/soc.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d85c24918c17..2abd53ae3e7a 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void) case 0: omap_revision = DRA722_REV_ES1_0; break; + case 1: default: - /* If we have no new revisions */ - omap_revision = DRA722_REV_ES1_0; + omap_revision = DRA722_REV_ES2_0; break; } break; diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 70df8f6cddcc..364418c78bf3 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8)) #define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) #define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) +#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); From 6b4725743100ab9a0731b952aa64b29a5808070d Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 17 Mar 2016 14:19:06 +0000 Subject: [PATCH 14/18] ARM: OMAP: Correct interrupt type for ARM TWD The ARM TWD interrupt is a private peripheral interrupt (PPI) and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For OMAP4 devices the PPI type cannot be set and so when we attempt to set the type for the ARM TWD interrupt it fails. This has done unnoticed because it fails silently and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. Reported-by: Grygorii Strashko Signed-off-by: Jon Hunter Tested-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2bd9c83300b2..421fe9f8a9eb 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -70,7 +70,7 @@ compatible = "arm,cortex-a9-twd-timer"; clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; - interrupts = ; + interrupts = ; interrupt-parent = <&gic>; }; From 6f40fed1c911f218e1e189a404b26ef19effabb5 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Fri, 18 Mar 2016 08:43:22 +0100 Subject: [PATCH 15/18] ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type In Baltos iR5221 cpsw_emac0 is connected directly to the switch IC and hence needs to be configured as "fixed-link". Signed-off-by: Yegor Yefremov Reviewed-by: Andrew Lunn Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos-ir5221.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 6c667fb35449..4e28d87e9356 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -470,9 +470,12 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; + fixed-link { + speed = <100>; + full-duplex; + }; }; &cpsw_emac1 { From 3137b716568f3ca8ca575fd13b91ddb42abd6844 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 25 Mar 2016 11:14:02 +0900 Subject: [PATCH 16/18] ARM: uniphier: drop weird sizeof() My intention was to ioremap a 4-byte register. Coincidentally enough, sizeof(SZ_4) equals to SZ_4, but this code is weird anyway. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/mach-uniphier/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index 69141357afe8..db04142f88bc 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) if (ret) return ret; - uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4)); + uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4); if (!uniphier_smp_rom_boot_rsv2) { pr_err("failed to map ROM_BOOT_RSV2 register\n"); return -ENOMEM; From 3de7beebddf8d56dcaa17b41c723d602dd0c513c Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 1 Apr 2016 19:32:43 +0900 Subject: [PATCH 17/18] bus: uniphier-system-bus: fix condition of overlap check This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d395a7 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by: Kunihiko Hayashi Acked-by: Masahiro Yamada Signed-off-by: Olof Johansson --- drivers/bus/uniphier-system-bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c index 834a2aeaf27a..350b7309c26d 100644 --- a/drivers/bus/uniphier-system-bus.c +++ b/drivers/bus/uniphier-system-bus.c @@ -108,7 +108,7 @@ static int uniphier_system_bus_check_overlap( for (i = 0; i < ARRAY_SIZE(priv->bank); i++) { for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) { - if (priv->bank[i].end > priv->bank[j].base || + if (priv->bank[i].end > priv->bank[j].base && priv->bank[i].base < priv->bank[j].end) { dev_err(priv->dev, "region overlap between bank%d and bank%d\n", From 452a31fd36255fc7d9dd9dce9d820fe0e5bb97b8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 4 Apr 2016 14:43:38 +0200 Subject: [PATCH 18/18] ARM: sa1100: remove references to the defunct handhelds.org The website handhelds.org has been down for a long time and is likely never coming back online. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/mach-sa1100/Kconfig | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index c6f6ed1cbed0..36e3c79f4973 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -61,10 +61,7 @@ config SA1100_H3100 select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ - H3100 handheld computer. Information about this machine and the - Linux port to this machine can be found at: - - + H3100 handheld computer. config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" @@ -73,10 +70,7 @@ config SA1100_H3600 select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ - H3600 handheld computer. Information about this machine and the - Linux port to this machine can be found at: - - + H3600 and H3700 handheld computers. config SA1100_BADGE4 bool "HP Labs BadgePAD 4"