NFC: nfcmrvl: add UART driver
Add support of Marvell NFC chip controlled over UART Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
parent
dc14bdef87
commit
e097dc624f
29
Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
Normal file
29
Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
Normal file
|
@ -0,0 +1,29 @@
|
|||
* Marvell International Ltd. NCI NFC Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "mrvl,nfc-uart".
|
||||
|
||||
Optional SoC specific properties:
|
||||
- pinctrl-names: Contains only one value - "default".
|
||||
- pintctrl-0: Specifies the pin control groups used for this controller.
|
||||
- reset-n-io: Output GPIO pin used to reset the chip (active low).
|
||||
- hci-muxed: Specifies that the chip is muxing NCI over HCI frames.
|
||||
|
||||
Optional UART-based chip specific properties:
|
||||
- flow-control: Specifies that the chip is using RTS/CTS.
|
||||
- break-control: Specifies that the chip needs specific break management.
|
||||
|
||||
Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
|
||||
nfcmrvluart: nfcmrvluart@5 {
|
||||
compatible = "mrvl,nfc-uart";
|
||||
|
||||
reset-n-io = <&gpio3 16 0>;
|
||||
|
||||
hci-muxed;
|
||||
flow-control;
|
||||
}
|
||||
};
|
|
@ -21,3 +21,14 @@ config NFC_MRVL_USB
|
|||
|
||||
Say Y here to compile support for Marvell NFC-over-USB driver
|
||||
into the kernel or say M to compile it as module.
|
||||
|
||||
config NFC_MRVL_UART
|
||||
tristate "Marvell NFC-over-UART driver"
|
||||
depends on NFC_MRVL && NFC_NCI_UART
|
||||
help
|
||||
Marvell NFC-over-UART driver.
|
||||
|
||||
This driver provides support for Marvell NFC-over-UART devices
|
||||
|
||||
Say Y here to compile support for Marvell NFC-over-UART driver
|
||||
into the kernel or say M to compile it as module.
|
||||
|
|
|
@ -7,3 +7,6 @@ obj-$(CONFIG_NFC_MRVL) += nfcmrvl.o
|
|||
|
||||
nfcmrvl_usb-y += usb.o
|
||||
obj-$(CONFIG_NFC_MRVL_USB) += nfcmrvl_usb.o
|
||||
|
||||
nfcmrvl_uart-y += uart.o
|
||||
obj-$(CONFIG_NFC_MRVL_UART) += nfcmrvl_uart.o
|
||||
|
|
|
@ -43,6 +43,11 @@
|
|||
#define NFCMRVL_HCI_OGF 0x81
|
||||
#define NFCMRVL_HCI_OCF 0xFE
|
||||
|
||||
enum nfcmrvl_phy {
|
||||
NFCMRVL_PHY_USB = 0,
|
||||
NFCMRVL_PHY_UART = 1,
|
||||
};
|
||||
|
||||
|
||||
struct nfcmrvl_private {
|
||||
|
||||
|
@ -61,6 +66,8 @@ struct nfcmrvl_private {
|
|||
void *drv_data;
|
||||
/* PHY device */
|
||||
struct device *dev;
|
||||
/* PHY type */
|
||||
enum nfcmrvl_phy phy;
|
||||
/* Low level driver ops */
|
||||
struct nfcmrvl_if_ops *if_ops;
|
||||
};
|
||||
|
|
225
drivers/nfc/nfcmrvl/uart.c
Normal file
225
drivers/nfc/nfcmrvl/uart.c
Normal file
|
@ -0,0 +1,225 @@
|
|||
/**
|
||||
* Marvell NFC-over-UART driver
|
||||
*
|
||||
* Copyright (C) 2015, Marvell International Ltd.
|
||||
*
|
||||
* This software file (the "File") is distributed by Marvell International
|
||||
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
|
||||
* (the "License"). You may use, redistribute and/or modify this File in
|
||||
* accordance with the terms and conditions of the License, a copy of which
|
||||
* is available on the worldwide web at
|
||||
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
|
||||
*
|
||||
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
|
||||
* this warranty disclaimer.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <net/nfc/nci.h>
|
||||
#include <net/nfc/nci_core.h>
|
||||
#include "nfcmrvl.h"
|
||||
|
||||
static unsigned int hci_muxed;
|
||||
static unsigned int flow_control;
|
||||
static unsigned int break_control;
|
||||
static unsigned int reset_n_io;
|
||||
|
||||
/*
|
||||
** NFCMRVL NCI OPS
|
||||
*/
|
||||
|
||||
static int nfcmrvl_uart_nci_open(struct nfcmrvl_private *priv)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int nfcmrvl_uart_nci_close(struct nfcmrvl_private *priv)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int nfcmrvl_uart_nci_send(struct nfcmrvl_private *priv,
|
||||
struct sk_buff *skb)
|
||||
{
|
||||
struct nci_uart *nu = priv->drv_data;
|
||||
|
||||
return nu->ops.send(nu, skb);
|
||||
}
|
||||
|
||||
static struct nfcmrvl_if_ops uart_ops = {
|
||||
.nci_open = nfcmrvl_uart_nci_open,
|
||||
.nci_close = nfcmrvl_uart_nci_close,
|
||||
.nci_send = nfcmrvl_uart_nci_send,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
|
||||
static int nfcmrvl_uart_parse_dt(struct device_node *node,
|
||||
struct nfcmrvl_platform_data *pdata)
|
||||
{
|
||||
struct device_node *matched_node;
|
||||
int ret;
|
||||
|
||||
matched_node = of_find_compatible_node(node, NULL, "mrvl,nfc-uart");
|
||||
if (!matched_node)
|
||||
return -ENODEV;
|
||||
|
||||
ret = nfcmrvl_parse_dt(matched_node, pdata);
|
||||
if (ret < 0) {
|
||||
pr_err("Failed to get generic entries\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (of_find_property(matched_node, "flow-control", NULL))
|
||||
pdata->flow_control = 1;
|
||||
else
|
||||
pdata->flow_control = 0;
|
||||
|
||||
if (of_find_property(matched_node, "break-control", NULL))
|
||||
pdata->break_control = 1;
|
||||
else
|
||||
pdata->break_control = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
static int nfcmrvl_uart_parse_dt(struct device_node *node,
|
||||
struct nfcmrvl_platform_data *pdata)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
** NCI UART OPS
|
||||
*/
|
||||
|
||||
static int nfcmrvl_nci_uart_open(struct nci_uart *nu)
|
||||
{
|
||||
struct nfcmrvl_private *priv;
|
||||
struct nfcmrvl_platform_data *pdata = NULL;
|
||||
struct nfcmrvl_platform_data config;
|
||||
|
||||
/*
|
||||
* Platform data cannot be used here since usually it is already used
|
||||
* by low level serial driver. We can try to retrieve serial device
|
||||
* and check if DT entries were added.
|
||||
*/
|
||||
|
||||
if (nu->tty->dev->parent && nu->tty->dev->parent->of_node)
|
||||
if (nfcmrvl_uart_parse_dt(nu->tty->dev->parent->of_node,
|
||||
&config) == 0)
|
||||
pdata = &config;
|
||||
|
||||
if (!pdata) {
|
||||
pr_info("No platform data / DT -> fallback to module params\n");
|
||||
config.hci_muxed = hci_muxed;
|
||||
config.reset_n_io = reset_n_io;
|
||||
config.flow_control = flow_control;
|
||||
config.break_control = break_control;
|
||||
pdata = &config;
|
||||
}
|
||||
|
||||
priv = nfcmrvl_nci_register_dev(nu, &uart_ops, nu->tty->dev, pdata);
|
||||
if (IS_ERR(priv))
|
||||
return PTR_ERR(priv);
|
||||
|
||||
priv->phy = NFCMRVL_PHY_UART;
|
||||
|
||||
nu->drv_data = priv;
|
||||
nu->ndev = priv->ndev;
|
||||
|
||||
/* Set BREAK */
|
||||
if (priv->config.break_control && nu->tty->ops->break_ctl)
|
||||
nu->tty->ops->break_ctl(nu->tty, -1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void nfcmrvl_nci_uart_close(struct nci_uart *nu)
|
||||
{
|
||||
nfcmrvl_nci_unregister_dev((struct nfcmrvl_private *)nu->drv_data);
|
||||
}
|
||||
|
||||
static int nfcmrvl_nci_uart_recv(struct nci_uart *nu, struct sk_buff *skb)
|
||||
{
|
||||
return nfcmrvl_nci_recv_frame((struct nfcmrvl_private *)nu->drv_data,
|
||||
skb);
|
||||
}
|
||||
|
||||
static void nfcmrvl_nci_uart_tx_start(struct nci_uart *nu)
|
||||
{
|
||||
struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data;
|
||||
|
||||
/* Remove BREAK to wake up the NFCC */
|
||||
if (priv->config.break_control && nu->tty->ops->break_ctl) {
|
||||
nu->tty->ops->break_ctl(nu->tty, 0);
|
||||
usleep_range(3000, 5000);
|
||||
}
|
||||
}
|
||||
|
||||
static void nfcmrvl_nci_uart_tx_done(struct nci_uart *nu)
|
||||
{
|
||||
struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data;
|
||||
|
||||
/*
|
||||
** To ensure that if the NFCC goes in DEEP SLEEP sate we can wake him
|
||||
** up. we set BREAK. Once we will be ready to send again we will remove
|
||||
** it.
|
||||
*/
|
||||
if (priv->config.break_control && nu->tty->ops->break_ctl)
|
||||
nu->tty->ops->break_ctl(nu->tty, -1);
|
||||
}
|
||||
|
||||
static struct nci_uart nfcmrvl_nci_uart = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "nfcmrvl_uart",
|
||||
.driver = NCI_UART_DRIVER_MARVELL,
|
||||
.ops = {
|
||||
.open = nfcmrvl_nci_uart_open,
|
||||
.close = nfcmrvl_nci_uart_close,
|
||||
.recv = nfcmrvl_nci_uart_recv,
|
||||
.tx_start = nfcmrvl_nci_uart_tx_start,
|
||||
.tx_done = nfcmrvl_nci_uart_tx_done,
|
||||
}
|
||||
};
|
||||
|
||||
/*
|
||||
** Module init
|
||||
*/
|
||||
|
||||
static int nfcmrvl_uart_init_module(void)
|
||||
{
|
||||
return nci_uart_register(&nfcmrvl_nci_uart);
|
||||
}
|
||||
|
||||
static void nfcmrvl_uart_exit_module(void)
|
||||
{
|
||||
nci_uart_unregister(&nfcmrvl_nci_uart);
|
||||
}
|
||||
|
||||
module_init(nfcmrvl_uart_init_module);
|
||||
module_exit(nfcmrvl_uart_exit_module);
|
||||
|
||||
MODULE_AUTHOR("Marvell International Ltd.");
|
||||
MODULE_DESCRIPTION("Marvell NFC-over-UART");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
||||
module_param(flow_control, uint, 0);
|
||||
MODULE_PARM_DESC(flow_control, "Tell if UART needs flow control at init.");
|
||||
|
||||
module_param(break_control, uint, 0);
|
||||
MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal.");
|
||||
|
||||
module_param(hci_muxed, uint, 0);
|
||||
MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
|
||||
|
||||
module_param(reset_n_io, uint, 0);
|
||||
MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
|
|
@ -26,6 +26,15 @@ struct nfcmrvl_platform_data {
|
|||
unsigned int reset_n_io;
|
||||
/* Tell if transport is muxed in HCI one */
|
||||
unsigned int hci_muxed;
|
||||
|
||||
/*
|
||||
* UART specific
|
||||
*/
|
||||
|
||||
/* Tell if UART needs flow control at init */
|
||||
unsigned int flow_control;
|
||||
/* Tell if firmware supports break control for power management */
|
||||
unsigned int break_control;
|
||||
};
|
||||
|
||||
#endif /* _NFCMRVL_PTF_H_ */
|
||||
|
|
|
@ -12,7 +12,6 @@
|
|||
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
|
||||
* this warranty disclaimer.
|
||||
|
||||
*/
|
||||
|
||||
/* Inspired (hugely) by HCI LDISC implementation in Bluetooth.
|
||||
|
|
Loading…
Reference in a new issue