redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

Browse source 
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: update cell_defconfig
  [PATCH] spufs: Disable local interrupts for SPE hash_page calls.
  [PATCH] powerpc: Add cputable entry for POWER6
  [PATCH] ppc32 CPM_UART: Fixed odd address translations
  [PATCH] ppc32: Update board-specific code of the CPM UART users
  [PATCH] ppc32 CPM_UART: Convert to use platform devices
  [PATCH] ppc32: odd fixes and improvements in ppc_sys
  [PATCH] powerpc: Wire up *at syscalls
  [PATCH] ppc32: add 440GX erratum 440_43 workaround
  [PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.
  [PATCH] powerpc64: Fix loading of modules without a .toc section
  [PATCH] sound/ppc: snd_pmac_toonie_init should be __init
  powerpc/pseries: Tell firmware our capabilities on new machines
  [PATCH] powerpc: Fix pagetable bloat for hugepages
This commit is contained in:
Linus Torvalds 2006-04-29 17:07:03 -07:00
parent 991cef7be2 6fb8f3acbe
commit e0a515bc6a
36 changed files with 1240 additions and 235 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

40
arch/powerpc/configs/cell_defconfig
View file

@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@ -55,6 +56,7 @@ CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_CELL_IIC=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@ -242,6 +240,7 @@ CONFIG_IPV6=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -765,10 +762,6 @@ CONFIG_I2C_ALGOBIT=y
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
@ -817,6 +810,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
@ -833,6 +839,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
@ -889,7 +900,6 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#

16
arch/powerpc/kernel/cputable.c
View file

@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
@ -263,6 +265,20 @@ struct cpu_spec cpu_specs[] = {
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
{ /* Power6 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003e0000,
.cpu_name = "POWER6",
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
.oprofile_cpu_type = "ppc64/power6",
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power6",
},
{ /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,

16
arch/powerpc/kernel/module_64.c
View file

@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
(void *)hdr
+ sechdrs[sechdrs[i].sh_link].sh_offset);
}
if (!me->arch.stubs_section || !me->arch.toc_section) {
printk("%s: doesn't contain .toc or .stubs.\n", me->name);
if (!me->arch.stubs_section) {
printk("%s: doesn't contain .stubs.\n", me->name);
return -ENOEXEC;
}
/* If we don't have a .toc, just use .stubs. We need to set r2
to some reasonable value in case the module calls out to
other functions via a stub, or if a function pointer escapes
the module by some means. */
if (!me->arch.toc_section)
me->arch.toc_section = me->arch.stubs_section;
/* Override the stubs size */
sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
return 0;
@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_PPC64_TOC16:
/* Subtact TOC pointer */
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if (value + 0x8000 > 0xffff) {
printk("%s: bad TOC16 relocation (%lu)\n",
@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
case R_PPC64_TOC16_DS:
/* Subtact TOC pointer */
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
printk("%s: bad TOC16_DS relocation (%lu)\n",

112
arch/powerpc/kernel/prom_init.c
View file

@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void)
#ifdef CONFIG_PPC_PSERIES
/*
* To tell the firmware what our capabilities are, we have to pass
* it a fake 32-bit ELF header containing a couple of PT_NOTE sections
* that contain structures that contain the actual values.
* There are two methods for telling firmware what our capabilities are.
* Newer machines have an "ibm,client-architecture-support" method on the
* root node. For older machines, we have to call the "process-elf-header"
* method in the /packages/elf-loader node, passing it a fake 32-bit
* ELF header containing a couple of PT_NOTE sections that contain
* structures that contain various information.
*/
/*
* New method - extensible architecture description vector.
*
* Because the description vector contains a mix of byte and word
* values, we declare it as an unsigned char array, and use this
* macro to put word values in.
*/
#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
((x) >> 8) & 0xff, (x) & 0xff
/* Option vector bits - generic bits in byte 1 */
#define OV_IGNORE 0x80 /* ignore this vector */
#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/
/* Option vector 1: processor architectures supported */
#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */
#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */
#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */
#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */
#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
/* Option vector 2: Open Firmware options supported */
#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
/* Option vector 3: processor options supported */
#define OV3_FP 0x80 /* floating point */
#define OV3_VMX 0x40 /* VMX/Altivec */
/* Option vector 5: PAPR/OF options supported */
#define OV5_LPAR 0x80 /* logical partitioning supported */
#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */
/* ibm,dynamic-reconfiguration-memory property supported */
#define OV5_DRCONF_MEMORY 0x20
#define OV5_LARGE_PAGES 0x10 /* large pages supported */
/*
* The architecture vector has an array of PVR mask/value pairs,
* followed by # option vectors - 1, followed by the option vectors.
*/
static unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
5 - 1, /* 5 option vectors */
/* option vector 1: processor architectures supported */
3 - 1, /* length */
0, /* don't ignore, don't halt */
OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
OV1_PPC_2_04 | OV1_PPC_2_05,
/* option vector 2: Open Firmware options supported */
34 - 1, /* length */
OV2_REAL_MODE,
0, 0,
W(0xffffffff), /* real_base */
W(0xffffffff), /* real_size */
W(0xffffffff), /* virt_base */
W(0xffffffff), /* virt_size */
W(0xffffffff), /* load_base */
W(64), /* 128MB min RMA */
W(0xffffffff), /* full client load */
0, /* min RMA percentage of total RAM */
48, /* max log_2(hash table size) */
/* option vector 3: processor options supported */
3 - 1, /* length */
0, /* don't ignore, don't halt */
OV3_FP | OV3_VMX,
/* option vector 4: IBM PAPR implementation */
2 - 1, /* length */
0, /* don't halt */
/* option vector 5: PAPR/OF options */
3 - 1, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
};
/* Old method - ELF header with PT_NOTE sections */
static struct fake_elf {
Elf32_Ehdr elfhdr;
Elf32_Phdr phdr[2];
@ -728,8 +814,26 @@ static struct fake_elf {
static void __init prom_send_capabilities(void)
{
ihandle elfloader;
ihandle elfloader, root;
prom_arg_t ret;
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
/* try calling the ibm,client-architecture-support method */
if (call_prom_ret("call-method", 3, 2, &ret,
ADDR("ibm,client-architecture-support"),
ADDR(ibm_architecture_vec)) == 0) {
/* the call exists... */
if (ret)
prom_printf("WARNING: ibm,client-architecture"
"-support call FAILED!\n");
call_prom("close", 1, 0, root);
return;
}
call_prom("close", 1, 0, root);
}
/* no ibm,client-architecture-support call, try the old way */
elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");

8
arch/powerpc/kernel/setup-common.c
View file

@ -516,3 +516,11 @@ void probe_machine(void)
printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
}
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
return 0;
return ppc_md.check_legacy_ioport(base_port);
}
EXPORT_SYMBOL(check_legacy_ioport);

8
arch/powerpc/kernel/setup_64.c
View file

@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
printk("[terminate]%04x %s\n", src, msg);
}
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
return 0;
return ppc_md.check_legacy_ioport(base_port);
}
EXPORT_SYMBOL(check_legacy_ioport);
void cpu_die(void)
{
if (ppc_md.cpu_die)

13
arch/powerpc/kernel/systbl.S
View file

@ -325,6 +325,19 @@ SYSCALL(unshare)
SYSCALL(splice)
SYSCALL(tee)
SYSCALL(vmsplice)
COMPAT_SYS(openat)
SYSCALL(mkdirat)
SYSCALL(mknodat)
SYSCALL(fchownat)
COMPAT_SYS(futimesat)
SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64)
SYSCALL(unlinkat)
SYSCALL(renameat)
SYSCALL(linkat)
SYSCALL(symlinkat)
SYSCALL(readlinkat)
SYSCALL(fchmodat)
SYSCALL(faccessat)
/*
* please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c

297
arch/powerpc/mm/hugetlbpage.c
View file

@ -30,13 +30,66 @@
#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT)
#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
#ifdef CONFIG_PPC_64K_PAGES
#define HUGEPTE_INDEX_SIZE (PMD_SHIFT-HPAGE_SHIFT)
#else
#define HUGEPTE_INDEX_SIZE (PUD_SHIFT-HPAGE_SHIFT)
#endif
#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE)
#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << HUGEPTE_INDEX_SIZE)
#define HUGEPD_SHIFT (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE)
#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT)
#define HUGEPD_MASK (~(HUGEPD_SIZE-1))
#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM])
/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
* will choke on pointers to hugepte tables, which is handy for
* catching screwups early. */
#define HUGEPD_OK 0x1
typedef struct { unsigned long pd; } hugepd_t;
#define hugepd_none(hpd) ((hpd).pd == 0)
static inline pte_t *hugepd_page(hugepd_t hpd)
{
BUG_ON(!(hpd.pd & HUGEPD_OK));
return (pte_t *)(hpd.pd & ~HUGEPD_OK);
}
static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
{
unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
pte_t *dir = hugepd_page(*hpdp);
return dir + idx;
}
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
unsigned long address)
{
pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
GFP_KERNEL|__GFP_REPEAT);
if (! new)
return -ENOMEM;
spin_lock(&mm->page_table_lock);
if (!hugepd_none(*hpdp))
kmem_cache_free(huge_pgtable_cache, new);
else
hpdp->pd = (unsigned long)new | HUGEPD_OK;
spin_unlock(&mm->page_table_lock);
return 0;
}
/* Modelled after find_linux_pte() */
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pg;
pud_t *pu;
pmd_t *pm;
pte_t *pt;
BUG_ON(! in_hugepage_area(mm->context, addr));
@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
if (!pgd_none(*pg)) {
pu = pud_offset(pg, addr);
if (!pud_none(*pu)) {
pm = pmd_offset(pu, addr);
#ifdef CONFIG_PPC_64K_PAGES
/* Currently, we use the normal PTE offset within full
* size PTE pages, thus our huge PTEs are scattered in
* the PTE page and we do waste some. We may change
* that in the future, but the current mecanism keeps
* things much simpler
*/
if (!pmd_none(*pm)) {
/* Note: pte_offset_* are all equivalent on
* ppc64 as we don't have HIGHMEM
*/
pt = pte_offset_kernel(pm, addr);
return pt;
}
#else /* CONFIG_PPC_64K_PAGES */
/* On 4k pages, we put huge PTEs in the PMD page */
pt = (pte_t *)pm;
return pt;
#endif /* CONFIG_PPC_64K_PAGES */
pmd_t *pm;
pm = pmd_offset(pu, addr);
if (!pmd_none(*pm))
return hugepte_offset((hugepd_t *)pm, addr);
#else
return hugepte_offset((hugepd_t *)pu, addr);
#endif
}
}
@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pg;
pud_t *pu;
pmd_t *pm;
pte_t *pt;
hugepd_t *hpdp = NULL;
BUG_ON(! in_hugepage_area(mm->context, addr));
@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
pu = pud_alloc(mm, pg, addr);
if (pu) {
pm = pmd_alloc(mm, pu, addr);
if (pm) {
#ifdef CONFIG_PPC_64K_PAGES
/* See comment in huge_pte_offset. Note that if we ever
* want to put the page size in the PMD, we would have
* to open code our own pte_alloc* function in order
* to populate and set the size atomically
*/
pt = pte_alloc_map(mm, pm, addr);
#else /* CONFIG_PPC_64K_PAGES */
pt = (pte_t *)pm;
#endif /* CONFIG_PPC_64K_PAGES */
return pt;
}
pmd_t *pm;
pm = pmd_alloc(mm, pu, addr);
if (pm)
hpdp = (hugepd_t *)pm;
#else
hpdp = (hugepd_t *)pu;
#endif
}
return NULL;
if (! hpdp)
return NULL;
if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
return NULL;
return hugepte_offset(hpdp, addr);
}
static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
{
pte_t *hugepte = hugepd_page(*hpdp);
hpdp->pd = 0;
tlb->need_flush = 1;
pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
HUGEPTE_TABLE_SIZE-1));
}
#ifdef CONFIG_PPC_64K_PAGES
static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pmd_t *pmd;
unsigned long next;
unsigned long start;
start = addr;
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd))
continue;
free_hugepte_range(tlb, (hugepd_t *)pmd);
} while (pmd++, addr = next, addr != end);
start &= PUD_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= PUD_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
return;
pmd = pmd_offset(pud, start);
pud_clear(pud);
pmd_free_tlb(tlb, pmd);
}
#endif
static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pud_t *pud;
unsigned long next;
unsigned long start;
start = addr;
pud = pud_offset(pgd, addr);
do {
next = pud_addr_end(addr, end);
#ifdef CONFIG_PPC_64K_PAGES
if (pud_none_or_clear_bad(pud))
continue;
hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
#else
if (pud_none(*pud))
continue;
free_hugepte_range(tlb, (hugepd_t *)pud);
#endif
} while (pud++, addr = next, addr != end);
start &= PGDIR_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= PGDIR_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
return;
pud = pud_offset(pgd, start);
pgd_clear(pgd);
pud_free_tlb(tlb, pud);
}
/*
* This function frees user-level page tables of a process.
*
* Must be called with pagetable lock held.
*/
void hugetlb_free_pgd_range(struct mmu_gather **tlb,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pgd_t *pgd;
unsigned long next;
unsigned long start;
/*
* Comments below take from the normal free_pgd_range(). They
* apply here too. The tests against HUGEPD_MASK below are
* essential, because we *don't* test for this at the bottom
* level. Without them we'll attempt to free a hugepte table
* when we unmap just part of it, even if there are other
* active mappings using it.
*
* The next few lines have given us lots of grief...
*
* Why are we testing HUGEPD* at this top level? Because
* often there will be no work to do at all, and we'd prefer
* not to go all the way down to the bottom just to discover
* that.
*
* Why all these "- 1"s? Because 0 represents both the bottom
* of the address space and the top of it (using -1 for the
* top wouldn't help much: the masks would do the wrong thing).
* The rule is that addr 0 and floor 0 refer to the bottom of
* the address space, but end 0 and ceiling 0 refer to the top
* Comparisons need to use "end - 1" and "ceiling - 1" (though
* that end 0 case should be mythical).
*
* Wherever addr is brought up or ceiling brought down, we
* must be careful to reject "the opposite 0" before it
* confuses the subsequent tests. But what about where end is
* brought down by HUGEPD_SIZE below? no, end can't go down to
* 0 there.
*
* Whereas we round start (addr) and ceiling down, by different
* masks at different levels, in order to test whether a table
* now has no other vmas using it, so can be freed, we don't
* bother to round floor or end up - the tests don't need that.
*/
addr &= HUGEPD_MASK;
if (addr < floor) {
addr += HUGEPD_SIZE;
if (!addr)
return;
}
if (ceiling) {
ceiling &= HUGEPD_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
end -= HUGEPD_SIZE;
if (addr > end - 1)
return;
start = addr;
pgd = pgd_offset((*tlb)->mm, addr);
do {
BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr));
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
} while (pgd++, addr = next, addr != end);
}
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
@ -841,3 +1040,27 @@ repeat:
out:
return err;
}
static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
{
memset(addr, 0, kmem_cache_size(cache));
}
static int __init hugetlbpage_init(void)
{
if (!cpu_has_feature(CPU_FTR_16M_PAGE))
return -ENODEV;
huge_pgtable_cache = kmem_cache_create("hugepte_cache",
HUGEPTE_TABLE_SIZE,
HUGEPTE_TABLE_SIZE,
SLAB_HWCACHE_ALIGN |
SLAB_MUST_HWCACHE_ALIGN,
zero_ctor, NULL);
if (! huge_pgtable_cache)
panic("hugetlbpage_init(): could not create hugepte cache\n");
return 0;
}
module_init(hugetlbpage_init);

7
arch/powerpc/mm/init_64.c
View file

@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
};
#endif /* CONFIG_PPC_64K_PAGES */
#ifdef CONFIG_HUGETLB_PAGE
/* Hugepages need one extra cache, initialized in hugetlbpage.c. We
* can't put into the tables above, because HPAGE_SHIFT is not compile
* time constant. */
kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
#else
kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
#endif
void pgtable_cache_init(void)
{

10
arch/powerpc/platforms/cell/spu_base.c
View file

@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu)
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
ret = request_irq(irq_base + spu->isrc,
spu_irq_class_0, 0, spu->irq_c0, spu);
spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu);
if (ret)
goto out;
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
spu_irq_class_1, 0, spu->irq_c1, spu);
spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu);
if (ret)
goto out1;
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
spu_irq_class_2, 0, spu->irq_c2, spu);
spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu);
if (ret)
goto out2;
goto out;
@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu)
ea = spu->dar;
dsisr = spu->dsisr;
if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
u64 flags;
access = (_PAGE_PRESENT | _PAGE_USER);
access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
local_irq_save(flags);
if (hash_page(ea, access, 0x300) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
local_irq_restore(flags);
}
if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
if ((ret = spu_handle_mm_fault(spu)) != 0)

13
arch/powerpc/platforms/cell/spu_callbacks.c
View file

@ -319,6 +319,19 @@ void *spu_syscall_table[] = {
[__NR_splice] sys_splice,
[__NR_tee] sys_tee,
[__NR_vmsplice] sys_vmsplice,
[__NR_openat] sys_openat,
[__NR_mkdirat] sys_mkdirat,
[__NR_mknodat] sys_mknodat,
[__NR_fchownat] sys_fchownat,
[__NR_futimesat] sys_futimesat,
[__NR_newfstatat] sys_newfstatat,
[__NR_unlinkat] sys_unlinkat,
[__NR_renameat] sys_renameat,
[__NR_linkat] sys_linkat,
[__NR_symlinkat] sys_symlinkat,
[__NR_readlinkat] sys_readlinkat,
[__NR_fchmodat] sys_fchmodat,
[__NR_faccessat] sys_faccessat,
};
long spu_sys_callback(struct spu_syscall_block *s)

2
arch/ppc/platforms/4xx/ocotea.c
View file

@ -331,7 +331,7 @@ static void __init ocotea_init(void)
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
ibm44x_platform_init(r3, r4, r5, r6, r7);
ibm440gx_platform_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = ocotea_setup_arch;
ppc_md.show_cpuinfo = ocotea_show_cpuinfo;

114
arch/ppc/platforms/mpc8272ads_setup.c
View file

@ -26,11 +26,35 @@
#include <asm/irq.h>
#include <asm/ppc_sys.h>
#include <asm/ppcboot.h>
#include <linux/fs_uart_pd.h>
#include "pq2ads_pd.h"
static void init_fcc1_ioports(void);
static void init_fcc2_ioports(void);
static void init_scc1_uart_ioports(void);
static void init_scc4_uart_ioports(void);
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
[fsid_scc1_uart] = {
.init_ioports = init_scc1_uart_ioports,
.fs_no = fsid_scc1_uart,
.brg = 1,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_scc4_uart] = {
.init_ioports = init_scc4_uart_ioports,
.fs_no = fsid_scc4_uart,
.brg = 4,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bus_info mii_bus_info = {
.method = fsmii_bitbang,
@ -201,6 +225,55 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
}
}
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc8272_uart_pdata);
int id = fs_uart_id_scc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc8272_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static void init_scc1_uart_ioports(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard,0x00000003);
clrbits32(&immap->im_ioport.iop_psord,0x00000001);
setbits32(&immap->im_ioport.iop_psord,0x00000002);
clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
setbits32(&immap->im_ioport.iop_pdird,0x00000002);
/* Wire BRG1 to SCC1 */
clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
iounmap(immap);
}
static void init_scc4_uart_ioports(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard,0x00000600);
clrbits32(&immap->im_ioport.iop_psord,0x00000600);
clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
setbits32(&immap->im_ioport.iop_pdird,0x00000400);
/* Wire BRG4 to SCC4 */
clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
iounmap(immap);
}
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
@ -208,6 +281,10 @@ static int mpc8272ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-fcc",
.rtn = mpc8272ads_fixup_enet_pdata
},
{
.bus_id = "fsl-cpm-scc:uart",
.rtn = mpc
},
{
.bus_id = NULL
}
@ -230,7 +307,44 @@ int __init mpc8272ads_init(void)
ppc_sys_device_enable(MPC82xx_CPM_FCC1);
ppc_sys_device_enable(MPC82xx_CPM_FCC2);
/* to be ready for console, let's attach pdata here */
#ifdef CONFIG_SERIAL_CPM_SCC1
ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC1);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SCC1 and by 1 assumed SCC4
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
pinfo = &mpc8272<F12>_uart_pdata[1];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
pinfo = &mpc8272_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}
arch_initcall(mpc8272ads_init);

140
arch/ppc/platforms/mpc866ads_setup.c
View file

@ -20,6 +20,7 @@
#include <linux/device.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
#include <asm/delay.h>
@ -37,6 +38,11 @@
extern unsigned char __res[];
static void setup_fec1_ioports(void);
static void setup_scc1_ioports(void);
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);
static struct fs_mii_bus_info fec_mii_bus_info = {
.method = fsmii_fec,
.id = 0,
@ -79,6 +85,28 @@ static struct fs_platform_info mpc8xx_scc_pdata = {
.phy_irq = -1,
.bus_info = &scc_mii_bus_info,
};
static struct fs_uart_platform_info mpc866_uart_pdata[] = {
[fsid_smc1_uart] = {
.brg = 1,
.fs_no = fsid_smc1_uart,
.init_ioports = setup_smc1_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_smc2_uart] = {
.brg = 2,
.fs_no = fsid_smc2_uart,
.init_ioports = setup_smc2_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
void __init board_init(void)
@ -92,9 +120,12 @@ void __init board_init(void)
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
#ifdef CONFIG_SERIAL_CPM_SMC1
cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
clrbits32(bcsr_io,(0x80000000 >> 7));
cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,(0x80000000 >> 7));
@ -108,6 +139,8 @@ void __init board_init(void)
cp->cp_simode &= ~(0xe0000000 >> 1);
cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
clrbits32(bcsr_io,(0x80000000 >> 13));
cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
clrbits32(bcsr_io,(0x80000000 >> 13));
cp->cp_pbpar &= ~(0x00000c00);
@ -232,6 +265,74 @@ static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x000000c0;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_1);
iounmap(bcsr_io);
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}
static void setup_smc2_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x00000c00;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_2);
iounmap(bcsr_io);
#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
#else
setbits16(&immap->im_ioport.iop_papar, iobits);
clrbits16(&immap->im_ioport.iop_padir, iobits);
clrbits16(&immap->im_ioport.iop_paodr, iobits);
#endif
}
static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc866_uart_pdata);
int id = fs_uart_id_smc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc866_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static int mpc866ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
@ -243,6 +344,10 @@ static int mpc866ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-scc",
.rtn = mpc866ads_fixup_scc_enet_pdata,
},
{
.bus_id = "fsl-cpm-smc:uart",
.rtn = mpc866ads_fixup_uart_pdata
},
{
.bus_id = NULL
}
@ -267,7 +372,42 @@ int __init mpc866ads_init(void)
#endif
ppc_sys_device_enable(MPC8xx_CPM_FEC1);
/* Since either of the uarts could be used as console, they need to ready */
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
#endif
#ifdef CONFIG_SERIAL_CPM_SMCer
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SMC1 and by 1 assumed SMC2
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SMC2 here*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
pinfo = &mpc866_uart_pdata[1];
} else { /*over SMC1*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
pinfo = &mpc866_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}
arch_initcall(mpc866ads_init);

131
arch/ppc/platforms/mpc885ads_setup.c
View file

@ -20,6 +20,7 @@
#include <linux/device.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
#include <asm/delay.h>
@ -35,9 +36,32 @@
#include <asm/ppc_sys.h>
extern unsigned char __res[];
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);
static void __init mpc885ads_scc_phy_init(char);
static struct fs_uart_platform_info mpc885_uart_pdata[] = {
[fsid_smc1_uart] = {
.brg = 1,
.fs_no = fsid_smc1_uart,
.init_ioports = setup_smc1_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_smc2_uart] = {
.brg = 2,
.fs_no = fsid_smc2_uart,
.init_ioports = setup_smc2_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bus_info fec_mii_bus_info = {
.method = fsmii_fec,
.id = 0,
@ -116,6 +140,8 @@ void __init board_init(void)
#ifdef CONFIG_SERIAL_CPM_SMC1
cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
clrbits32(bcsr_io, BCSR1_RS232EN_1);
cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_1);
cp->cp_smc[0].smc_smcmr = 0;
@ -126,6 +152,8 @@ void __init board_init(void)
cp->cp_simode &= ~(0xe0000000 >> 1);
cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
clrbits32(bcsr_io,BCSR1_RS232EN_2);
cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_2);
cp->cp_smc[1].smc_smcmr = 0;
@ -343,6 +371,70 @@ static void mpc885ads_scc_phy_init(char phy_addr)
out_be32(&fecp->fec_mii_speed, 0);
}
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x000000c0;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_1);
iounmap(bcsr_io);
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}
static void setup_smc2_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x00000c00;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_2);
iounmap(bcsr_io);
#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
#else
setbits16(&immap->im_ioport.iop_papar, iobits);
clrbits16(&immap->im_ioport.iop_padir, iobits);
clrbits16(&immap->im_ioport.iop_paodr, iobits);
#endif
}
static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc885_uart_pdata);
int id = fs_uart_id_smc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc885_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static int mpc885ads_platform_notify(struct device *dev)
{
@ -355,6 +447,10 @@ static int mpc885ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-scc",
.rtn = mpc885ads_fixup_scc_enet_pdata,
},
{
.bus_id = "fsl-cpm-smc:uart",
.rtn = mpc885ads_fixup_uart_pdata
},
{
.bus_id = NULL
}
@ -362,6 +458,7 @@ static int mpc885ads_platform_notify(struct device *dev)
platform_notify_map(dev_map,dev);
return 0;
}
int __init mpc885ads_init(void)
@ -383,7 +480,41 @@ int __init mpc885ads_init(void)
ppc_sys_device_enable(MPC8xx_CPM_FEC2);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
return 0;
}
arch_initcall(mpc885ads_init);
/*
To prevent confusion, console selection is gross:
by 0 assumed SMC1 and by 1 assumed SMC2
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SMC2 here*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
pinfo = &mpc885_uart_pdata[1];
} else { /*over SMC1*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
pinfo = &mpc885_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}

31
arch/ppc/platforms/pq2ads.c
View file

@ -14,11 +14,40 @@
#include <linux/init.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
void __init
m82xx_board_setup(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
/* Enable the 2nd UART port */
*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_RS232_EN2;
clrbits32(bcsr, BCSR1_RS232_EN2);
#ifdef CONFIG_SERIAL_CPM_SCC1
clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
iounmap(bcsr);
iounmap(immap);
}

13
arch/ppc/syslib/ibm440gx_common.c
View file

@ -2,7 +2,7 @@
* PPC440GX system library
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
* Copyright (c) 2003 - 2006 Zultys Technologies
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -282,3 +282,14 @@ int ibm440gx_show_cpuinfo(struct seq_file *m){
return 0;
}
void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6,
unsigned long r7)
{
/* Erratum 440_43 workaround, disable L1 cache parity checking */
if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
ibm44x_platform_init(r3, r4, r5, r6, r7);
}

4
arch/ppc/syslib/ibm440gx_common.h
View file

@ -29,6 +29,10 @@
void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
unsigned int ser_clk) __init;
/* common 440GX platform init */
void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7) __init;
/* Enable L2 cache */
void ibm440gx_l2c_enable(void) __init;

25
arch/ppc/syslib/mpc8xx_devices.c
View file

@ -170,12 +170,18 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC8xx_CPM_SMC1] = {
.name = "fsl-cpm-smc",
.id = 1,
.num_resources = 2,
.num_resources = 3,
.resource = (struct resource[]) {
{
.name = "regs",
.start = 0xa82,
.end = 0xa91,
.start = 0xa80,
.end = 0xa8f,
.flags = IORESOURCE_MEM,
},
{
.name = "pram",
.start = 0x3e80,
.end = 0x3ebf,
.flags = IORESOURCE_MEM,
},
{
@ -189,14 +195,21 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC8xx_CPM_SMC2] = {
.name = "fsl-cpm-smc",
.id = 2,
.num_resources = 2,
.num_resources = 3,
.resource = (struct resource[]) {
{
.name = "regs",
.start = 0xa92,
.end = 0xaa1,
.start = 0xa90,
.end = 0xa9f,
.flags = IORESOURCE_MEM,
},
{
.name = "pram",
.start = 0x3f80,
.end = 0x3fbf,
.flags = IORESOURCE_MEM,
},
{
.name = "interrupt",
.start = MPC8xx_INT_SMC2,

4
arch/ppc/syslib/ppc_sys.c
View file

@ -109,9 +109,11 @@ ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
int i;
for (i = 0; i < pdev->num_resources; i++) {
struct resource *r = &pdev->resource[i];
if ((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) {
if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) &&
((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
r->start += paddr;
r->end += paddr;
r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
}
}
}

8
arch/ppc/syslib/pq2_sys.c
View file

@ -113,13 +113,13 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8248",
.mask = 0x0000ff00,
.value = 0x00000c00,
.num_devices = 11,
.num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
MPC82xx_CPM_USB, MPC82xx_SEC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
},
},
{

2
drivers/block/floppy.c
View file

@ -4301,7 +4301,7 @@ static int __init floppy_init(void)
}
use_virtual_dma = can_use_virtual_dma & 1;
#if defined(CONFIG_PPC64)
#if defined(CONFIG_PPC_MERGE)
if (check_legacy_ioport(FDC1)) {
del_timer(&fd_timeout);
err = -ENODEV;

4
drivers/input/serio/i8042-io.h
View file

@ -67,14 +67,14 @@ static inline int i8042_platform_init(void)
* On some platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on such boxes.
*/
#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC64)
#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC_MERGE)
if (!request_region(I8042_DATA_REG, 16, "i8042"))
return -EBUSY;
#endif
i8042_reset = 1;
#if defined(CONFIG_PPC64)
#if defined(CONFIG_PPC_MERGE)
if (check_legacy_ioport(I8042_DATA_REG))
return -EBUSY;
if (!request_region(I8042_DATA_REG, 16, "i8042"))

49
drivers/serial/cpm_uart/cpm_uart.h
View file

@ -10,6 +10,8 @@
#define CPM_UART_H
#include <linux/config.h>
#include <linux/platform_device.h>
#include <linux/fs_uart_pd.h>
#if defined(CONFIG_CPM2)
#include "cpm_uart_cpm2.h"
@ -26,14 +28,14 @@
#define FLAG_SMC 0x00000002
#define FLAG_CONSOLE 0x00000001
#define UART_SMC1 0
#define UART_SMC2 1
#define UART_SCC1 2
#define UART_SCC2 3
#define UART_SCC3 4
#define UART_SCC4 5
#define UART_SMC1 fsid_smc1_uart
#define UART_SMC2 fsid_smc2_uart
#define UART_SCC1 fsid_scc1_uart
#define UART_SCC2 fsid_scc2_uart
#define UART_SCC3 fsid_scc3_uart
#define UART_SCC4 fsid_scc4_uart
#define UART_NR 6
#define UART_NR fs_uart_nr
#define RX_NUM_FIFO 4
#define RX_BUF_SIZE 32
@ -64,6 +66,7 @@ struct uart_cpm_port {
uint dp_addr;
void *mem_addr;
dma_addr_t dma_addr;
u32 mem_size;
/* helpers */
int baud;
int bits;
@ -90,4 +93,36 @@ void scc2_lineif(struct uart_cpm_port *pinfo);
void scc3_lineif(struct uart_cpm_port *pinfo);
void scc4_lineif(struct uart_cpm_port *pinfo);
/*
virtual to phys transtalion
*/
static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
{
int offset;
u32 val = (u32)addr;
/* sane check */
if ((val >= (u32)pinfo->mem_addr) &&
(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
offset = val - (u32)pinfo->mem_addr;
return pinfo->dma_addr+offset;
}
printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
return 0;
}
static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
{
int offset;
u32 val = addr;
/* sane check */
if ((val >= pinfo->dma_addr) &&
(val<(pinfo->dma_addr + pinfo->mem_size))) {
offset = val - (u32)pinfo->dma_addr;
return (void*)(pinfo->mem_addr+offset);
}
printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
return 0;
}
#endif /* CPM_UART_H */

290
drivers/serial/cpm_uart/cpm_uart_core.c
View file

@ -41,6 +41,7 @@
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>
#include <linux/fs_uart_pd.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -60,7 +61,7 @@
/* Track which ports are configured as uarts */
int cpm_uart_port_map[UART_NR];
/* How many ports did we config as uarts */
int cpm_uart_nr;
int cpm_uart_nr = 0;
/**************************************************************/
@ -71,18 +72,36 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
/**************************************************************/
static inline unsigned long cpu2cpm_addr(void *addr)
/* Place-holder for board-specific stuff */
struct platform_device* __attribute__ ((weak)) __init
early_uart_get_pdev(int index)
{
if ((unsigned long)addr >= CPM_ADDR)
return (unsigned long)addr;
return virt_to_bus(addr);
return NULL;
}
static inline void *cpm2cpu_addr(unsigned long addr)
void cpm_uart_count(void)
{
if (addr >= CPM_ADDR)
return (void *)addr;
return bus_to_virt(addr);
cpm_uart_nr = 0;
#ifdef CONFIG_SERIAL_CPM_SMC1
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC1
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
#endif
}
/*
@ -258,7 +277,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
}
/* get pointer */
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
/* loop through the buffer */
while (i-- > 0) {
@ -601,7 +620,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
p = cpm2cpu_addr(bdp->cbd_bufaddr);
p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*p++ = port->x_char;
bdp->cbd_datlen = 1;
@ -628,7 +647,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
count = 0;
p = cpm2cpu_addr(bdp->cbd_bufaddr);
p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
while (count < pinfo->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@ -677,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr;
bdp = pinfo->rx_cur = pinfo->rx_bd_base;
for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += pinfo->rx_fifosize;
}
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
/* Set the physical address of the host memory
@ -692,12 +711,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_INTRPT;
mem_addr += pinfo->tx_fifosize;
}
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
}
@ -829,14 +848,6 @@ static int cpm_uart_request_port(struct uart_port *port)
if (pinfo->flags & FLAG_CONSOLE)
return 0;
/*
* Setup any port IO, connect any baud rate generators,
* etc. This is expected to be handled by board
* dependant code
*/
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@ -988,6 +999,54 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
},
};
int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
{
struct resource *r;
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */
struct uart_cpm_port *pinfo;
int line;
u32 mem, pram;
for (line=0; line<UART_NR && cpm_uart_port_map[line]!=pdata->fs_no; line++);
pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
pinfo->brg = pdata->brg;
if (!is_con) {
pinfo->port.line = line;
pinfo->port.flags = UPF_BOOT_AUTOCONF;
}
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
return -EINVAL;
mem = r->start;
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
return -EINVAL;
pram = r->start;
if(idx > fsid_smc2_uart) {
pinfo->sccp = (scc_t *)mem;
pinfo->sccup = (scc_uart_t *)pram;
} else {
pinfo->smcp = (smc_t *)mem;
pinfo->smcup = (smc_uart_t *)pram;
}
pinfo->tx_nrfifos = pdata->tx_num_fifo;
pinfo->tx_fifosize = pdata->tx_buf_size;
pinfo->rx_nrfifos = pdata->rx_num_fifo;
pinfo->rx_fifosize = pdata->rx_buf_size;
pinfo->port.uartclk = pdata->uart_clk;
pinfo->port.mapbase = (unsigned long)mem;
pinfo->port.irq = platform_get_irq(pdev, 0);
return 0;
}
#ifdef CONFIG_SERIAL_CPM_CONSOLE
/*
* Print a string to the serial port trying not to disturb
@ -1027,7 +1086,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*cp = *s;
@ -1044,7 +1103,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
while ((bdp->cbd_sc & BD_SC_READY) != 0)
;
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
*cp = 13;
bdp->cbd_datlen = 1;
@ -1067,9 +1126,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
pinfo->tx_cur = (volatile cbd_t *) bdp;
}
/*
* Setup console. Be careful is called early !
*/
static int __init cpm_uart_console_setup(struct console *co, char *options)
{
struct uart_port *port;
@ -1080,9 +1137,27 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
int flow = 'n';
int ret;
struct fs_uart_platform_info *pdata;
struct platform_device* pdev = early_uart_get_pdev(co->index);
port =
(struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
pinfo = (struct uart_cpm_port *)port;
if (!pdev) {
pr_info("cpm_uart: console: compat mode\n");
/* compatibility - will be cleaned up */
cpm_uart_init_portdesc();
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
} else {
pdata = pdev->dev.platform_data;
if (pdata)
if (pdata->init_ioports)
pdata->init_ioports();
cpm_uart_drv_get_platform_data(pdev, 1);
}
pinfo->flags |= FLAG_CONSOLE;
@ -1097,14 +1172,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
baud = 9600;
}
/*
* Setup any port IO, connect any baud rate generators,
* etc. This is expected to be handled by board
* dependant code
*/
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@ -1143,11 +1210,8 @@ static struct console cpm_scc_uart_console = {
int __init cpm_uart_console_init(void)
{
int ret = cpm_uart_init_portdesc();
if (!ret)
register_console(&cpm_scc_uart_console);
return ret;
register_console(&cpm_scc_uart_console);
return 0;
}
console_initcall(cpm_uart_console_init);
@ -1165,44 +1229,130 @@ static struct uart_driver cpm_reg = {
.minor = SERIAL_CPM_MINOR,
.cons = CPM_UART_CONSOLE,
};
static int __init cpm_uart_init(void)
static int cpm_uart_drv_probe(struct device *dev)
{
int ret, i;
struct platform_device *pdev = to_platform_device(dev);
struct fs_uart_platform_info *pdata;
int ret = -ENODEV;
printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
#ifndef CONFIG_SERIAL_CPM_CONSOLE
ret = cpm_uart_init_portdesc();
if (ret)
if(!pdev) {
printk(KERN_ERR"CPM UART: platform data missing!\n");
return ret;
#endif
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
if (ret)
return ret;
for (i = 0; i < cpm_uart_nr; i++) {
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
pdata = pdev->dev.platform_data;
pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n",
cpm_uart_port_map[pdata->fs_no]);
if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
return ret;
if (pdata->init_ioports)
pdata->init_ioports();
ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
return ret;
}
static int cpm_uart_drv_remove(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
cpm_uart_port_map[pdata->fs_no]);
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
return 0;
}
static struct device_driver cpm_smc_uart_driver = {
.name = "fsl-cpm-smc:uart",
.bus = &platform_bus_type,
.probe = cpm_uart_drv_probe,
.remove = cpm_uart_drv_remove,
};
static struct device_driver cpm_scc_uart_driver = {
.name = "fsl-cpm-scc:uart",
.bus = &platform_bus_type,
.probe = cpm_uart_drv_probe,
.remove = cpm_uart_drv_remove,
};
/*
This is supposed to match uart devices on platform bus,
*/
static int match_is_uart (struct device* dev, void* data)
{
struct platform_device* pdev = container_of(dev, struct platform_device, dev);
int ret = 0;
/* this was setfunc as uart */
if(strstr(pdev->name,":uart")) {
ret = 1;
}
return ret;
}
static int cpm_uart_init(void) {
int ret;
int i;
struct device *dev;
printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
/* lookup the bus for uart devices */
dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
/* There are devices on the bus - all should be OK */
if (dev) {
cpm_uart_count();
cpm_reg.nr = cpm_uart_nr;
if (!(ret = uart_register_driver(&cpm_reg))) {
if ((ret = driver_register(&cpm_smc_uart_driver))) {
uart_unregister_driver(&cpm_reg);
return ret;
}
if ((ret = driver_register(&cpm_scc_uart_driver))) {
driver_unregister(&cpm_scc_uart_driver);
uart_unregister_driver(&cpm_reg);
}
}
} else {
/* No capable platform devices found - falling back to legacy mode */
pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
pr_info(
"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
#ifndef CONFIG_SERIAL_CPM_CONSOLE
ret = cpm_uart_init_portdesc();
if (ret)
return ret;
#endif
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
if (ret)
return ret;
for (i = 0; i < cpm_uart_nr; i++) {
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
}
return ret;
}
static void __exit cpm_uart_exit(void)
{
int i;
for (i = 0; i < cpm_uart_nr; i++) {
int con = cpm_uart_port_map[i];
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
driver_unregister(&cpm_scc_uart_driver);
driver_unregister(&cpm_smc_uart_driver);
uart_unregister_driver(&cpm_reg);
}

54
drivers/serial/cpm_uart/cpm_uart_cpm1.c
View file

@ -81,58 +81,11 @@ void cpm_line_cr_cmd(int line, int cmd)
void smc1_lineif(struct uart_cpm_port *pinfo)
{
volatile cpm8xx_t *cp = cpmp;
(void)cp; /* fix warning */
#if defined (CONFIG_MPC885ADS)
/* Enable SMC1 transceivers */
{
cp->cp_pepar |= 0x000000c0;
cp->cp_pedir &= ~0x000000c0;
cp->cp_peso &= ~0x00000040;
cp->cp_peso |= 0x00000080;
}
#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x000000c0;
if (!pinfo->is_portb) {
cp->cp_pbpar |= iobits;
cp->cp_pbdir &= ~iobits;
cp->cp_pbodr &= ~iobits;
} else {
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
#endif
pinfo->brg = 1;
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
volatile cpm8xx_t *cp = cpmp;
(void)cp; /* fix warning */
#if defined (CONFIG_MPC885ADS)
cp->cp_pepar |= 0x00000c00;
cp->cp_pedir &= ~0x00000c00;
cp->cp_peso &= ~0x00000400;
cp->cp_peso |= 0x00000800;
#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x00000c00;
if (!pinfo->is_portb) {
cp->cp_pbpar |= iobits;
cp->cp_pbdir &= ~iobits;
cp->cp_pbodr &= ~iobits;
} else {
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
#endif
pinfo->brg = 2;
}
@ -191,7 +144,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
/* was hostalloc but changed cause it blows away the */
/* large tlb mapping when pinning the kernel area */
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = 0;
dma_addr = (u32)mem_addr;
} else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
@ -204,8 +157,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
}
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr;
pinfo->dma_addr = dma_addr;
pinfo->mem_addr = mem_addr; /* virtual address*/
pinfo->dma_addr = dma_addr; /* physical address*/
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos

14
drivers/serial/cpm_uart/cpm_uart_cpm2.c
View file

@ -142,21 +142,12 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
* be supported in a sane fashion.
*/
#ifndef CONFIG_STX_GP3
#ifdef CONFIG_MPC8560_ADS
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
io->iop_ppard |= 0x00000018;
io->iop_psord &= ~0x00000008; /* Rx */
io->iop_psord &= ~0x00000010; /* Tx */
io->iop_pdird &= ~0x00000008; /* Rx */
io->iop_pdird |= 0x00000010; /* Tx */
#else
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
#endif
#endif
cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
@ -218,8 +209,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con)
if (is_con) {
mem_addr = alloc_bootmem(memsz);
dma_addr = mem_addr;
}
else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
@ -234,6 +227,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr;
pinfo->dma_addr = dma_addr;
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos

2
fs/stat.c
View file

@ -261,7 +261,7 @@ asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf)
return error;
}
#ifndef __ARCH_WANT_STAT64
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
asmlinkage long sys_newfstatat(int dfd, char __user *filename,
struct stat __user *statbuf, int flag)
{

14
include/asm-powerpc/cputable.h
View file

@ -22,6 +22,7 @@
#define PPC_FEATURE_BOOKE 0x00008000
#define PPC_FEATURE_SMT 0x00004000
#define PPC_FEATURE_ICACHE_SNOOP 0x00002000
#define PPC_FEATURE_ARCH_2_05 0x00001000
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
@ -320,6 +321,11 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR)
#define CPU_FTRS_POWER6 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE)
#define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@ -331,8 +337,8 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#ifdef __powerpc64__
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL | \
CPU_FTR_CI_LARGE_PAGE)
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_CELL | CPU_FTR_CI_LARGE_PAGE)
#else
enum {
CPU_FTRS_POSSIBLE =
@ -376,8 +382,8 @@ enum {
#ifdef __powerpc64__
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL & \
CPU_FTRS_POSSIBLE)
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \
CPU_FTRS_CELL & CPU_FTRS_POSSIBLE)
#else
enum {
CPU_FTRS_ALWAYS =

6
include/asm-powerpc/io.h
View file

@ -9,6 +9,9 @@
* 2 of the License, or (at your option) any later version.
*/
/* Check of existence of legacy devices */
extern int check_legacy_ioport(unsigned long base_port);
#ifndef CONFIG_PPC64
#include <asm-ppc/io.h>
#else
@ -437,9 +440,6 @@ out:
#define dma_cache_wback(_start,_size) do { } while (0)
#define dma_cache_wback_inv(_start,_size) do { } while (0)
/* Check of existence of legacy devices */
extern int check_legacy_ioport(unsigned long base_port);
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem

1
include/asm-powerpc/page_64.h
View file

@ -101,6 +101,7 @@ extern unsigned int HPAGE_SHIFT;
- (1U << GET_HTLB_AREA(addr))) & 0xffff)
#define ARCH_HAS_HUGEPAGE_ONLY_RANGE
#define ARCH_HAS_HUGETLB_FREE_PGD_RANGE
#define ARCH_HAS_PREPARE_HUGEPAGE_RANGE
#define ARCH_HAS_SETCLEAR_HUGE_PTE

2
include/asm-powerpc/pgalloc.h
View file

@ -17,11 +17,13 @@ extern kmem_cache_t *pgtable_cache[];
#define PTE_CACHE_NUM 0
#define PMD_CACHE_NUM 1
#define PGD_CACHE_NUM 2
#define HUGEPTE_CACHE_NUM 3
#else
#define PTE_CACHE_NUM 0
#define PMD_CACHE_NUM 1
#define PUD_CACHE_NUM 1
#define PGD_CACHE_NUM 0
#define HUGEPTE_CACHE_NUM 2
#endif
/*

20
include/asm-powerpc/unistd.h
View file

@ -304,8 +304,25 @@
#define __NR_splice 283
#define __NR_tee 284
#define __NR_vmsplice 285
#define __NR_openat 286
#define __NR_mkdirat 287
#define __NR_mknodat 288
#define __NR_fchownat 289
#define __NR_futimesat 290
#ifdef __powerpc64__
#define __NR_newfstatat 291
#else
#define __NR_fstatat64 291
#endif
#define __NR_unlinkat 292
#define __NR_renameat 293
#define __NR_linkat 294
#define __NR_symlinkat 295
#define __NR_readlinkat 296
#define __NR_fchmodat 297
#define __NR_faccessat 298
#define __NR_syscalls 286
#define __NR_syscalls 299
#ifdef __KERNEL__
#define __NR__exit __NR_exit
@ -458,6 +475,7 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
#ifdef CONFIG_PPC64
#define __ARCH_WANT_COMPAT_SYS_TIME
#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_NEWFSTATAT
#endif
/*

2
include/asm-ppc/ppc_sys.h
View file

@ -39,6 +39,8 @@
#error "need definition of ppc_sys_devices"
#endif
#define PPC_SYS_IORESOURCE_FIXUPPED 0x00000001
struct ppc_sys_spec {
/* PPC sys is matched via (ID & mask) == value, id could be
* PVR, SVR, IMMR, * etc. */

1
include/asm-ppc/reg_booke.h
View file

@ -237,6 +237,7 @@ do { \
#endif
/* Bit definitions for CCR1. */
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
/* Bit definitions for the MCSR. */

2
sound/ppc/toonie.c
View file

@ -335,7 +335,7 @@ static void toonie_cleanup(struct snd_pmac *chip)
chip->mixer_data = NULL;
}
int snd_pmac_toonie_init(struct snd_pmac *chip)
int __init snd_pmac_toonie_init(struct snd_pmac *chip)
{
struct pmac_toonie *mix;