redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

V4L/DVB: IR: extend interfaces to support more device settings 

LIRC: add new IOCTL that enables learning mode (wide band receiver)
Still missing features: carrier report & timeout reports.
Will need to pack these into ir_raw_event

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
wifi-calibration
Maxim Levitsky 2010-07-31 11:59:23 -03:00 committed by Mauro Carvalho Chehab
parent 4a702ebf61
commit e589333f34
5 changed files with 125 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/DocBook/v4l/lirc_device_interface.xml
View File

@ -229,6 +229,22 @@ on working with the default settings initially.</para>
and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>LIRC_SET_WIDEBAND_RECEIVER</term>
<listitem>
<para>Some receivers are equipped with special wide band receiver which is intended
to be used to learn output of existing remote.
Calling that ioctl with (1) will enable it, and with (0) disable it.
This might be useful of receivers that have otherwise narrow band receiver
that prevents them to be used with some remotes.
Wide band receiver might also be more precise
On the other hand its disadvantage it usually reduced range of reception.
Note: wide band receiver might be implictly enabled if you enable
carrier reports. In that case it will be disabled as soon as you disable
carrier reports. Trying to disable wide band receiver while carrier
reports are active will do nothing.</para>
</listitem>
</varlistentry>
</variablelist>
</section>

1
drivers/media/IR/ir-core-priv.h
View File

@ -79,6 +79,7 @@ struct ir_raw_event_ctrl {
struct lirc_codec {
struct ir_input_dev *ir_dev;
struct lirc_driver *drv;
int carrier_low;
} lirc;
};

112
drivers/media/IR/ir-lirc-codec.c
View File

@ -46,7 +46,6 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
TO_US(ev.duration), TO_STR(ev.pulse));
sample = ev.duration / 1000;
if (ev.pulse)
sample |= PULSE_BIT;
@ -96,13 +95,14 @@ out:
return ret;
}
static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
unsigned long __user arg)
{
struct lirc_codec *lirc;
struct ir_input_dev *ir_dev;
int ret = 0;
void *drv_data;
unsigned long val;
unsigned long val = 0;
lirc = lirc_get_pdata(filep);
if (!lirc)
@ -114,47 +114,106 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long ar
drv_data = ir_dev->props->priv;
switch (cmd) {
case LIRC_SET_TRANSMITTER_MASK:
if (_IOC_DIR(cmd) & _IOC_WRITE) {
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
}
if (ir_dev->props && ir_dev->props->s_tx_mask)
switch (cmd) {
/* legacy support */
case LIRC_GET_SEND_MODE:
val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
break;
case LIRC_SET_SEND_MODE:
if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
return -EINVAL;
break;
/* TX settings */
case LIRC_SET_TRANSMITTER_MASK:
if (ir_dev->props->s_tx_mask)
ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
else
return -EINVAL;
break;
case LIRC_SET_SEND_CARRIER:
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
if (ir_dev->props && ir_dev->props->s_tx_carrier)
if (ir_dev->props->s_tx_carrier)
ir_dev->props->s_tx_carrier(drv_data, (u32)val);
else
return -EINVAL;
break;
case LIRC_GET_SEND_MODE:
val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
ret = put_user(val, (unsigned long *)arg);
case LIRC_SET_SEND_DUTY_CYCLE:
if (!ir_dev->props->s_tx_duty_cycle)
return -ENOSYS;
if (val <= 0 || val >= 100)
return -EINVAL;
ir_dev->props->s_tx_duty_cycle(ir_dev->props->priv, val);
break;
case LIRC_SET_SEND_MODE:
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
/* RX settings */
case LIRC_SET_REC_CARRIER:
if (ir_dev->props->s_rx_carrier_range)
ret = ir_dev->props->s_rx_carrier_range(
ir_dev->props->priv,
ir_dev->raw->lirc.carrier_low, val);
else
return -ENOSYS;
if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
if (!ret)
ir_dev->raw->lirc.carrier_low = 0;
break;
case LIRC_SET_REC_CARRIER_RANGE:
if (val >= 0)
ir_dev->raw->lirc.carrier_low = val;
break;
case LIRC_GET_REC_RESOLUTION:
val = ir_dev->props->rx_resolution;
break;
case LIRC_SET_WIDEBAND_RECEIVER:
if (ir_dev->props->s_learning_mode)
return ir_dev->props->s_learning_mode(
ir_dev->props->priv, !!val);
else
return -ENOSYS;
/* Generic timeout support */
case LIRC_GET_MIN_TIMEOUT:
if (!ir_dev->props->max_timeout)
return -ENOSYS;
val = ir_dev->props->min_timeout / 1000;
break;
case LIRC_GET_MAX_TIMEOUT:
if (!ir_dev->props->max_timeout)
return -ENOSYS;
val = ir_dev->props->max_timeout / 1000;
break;
case LIRC_SET_REC_TIMEOUT:
if (val < ir_dev->props->min_timeout ||
val > ir_dev->props->max_timeout)
return -EINVAL;
ir_dev->props->timeout = val * 1000;
break;
default:
return lirc_dev_fop_ioctl(filep, cmd, arg);
}
if (_IOC_DIR(cmd) & _IOC_READ)
ret = put_user(val, (unsigned long *)arg);
return ret;
}
@ -200,13 +259,28 @@ static int ir_lirc_register(struct input_dev *input_dev)
features = LIRC_CAN_REC_MODE2;
if (ir_dev->props->tx_ir) {
features |= LIRC_CAN_SEND_PULSE;
if (ir_dev->props->s_tx_mask)
features |= LIRC_CAN_SET_TRANSMITTER_MASK;
if (ir_dev->props->s_tx_carrier)
features |= LIRC_CAN_SET_SEND_CARRIER;
if (ir_dev->props->s_tx_duty_cycle)
features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
}
if (ir_dev->props->s_rx_carrier_range)
features |= LIRC_CAN_SET_REC_CARRIER |
LIRC_CAN_SET_REC_CARRIER_RANGE;
if (ir_dev->props->s_learning_mode)
features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
if (ir_dev->props->max_timeout)
features |= LIRC_CAN_SET_REC_TIMEOUT;
snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
ir_dev->driver_name);
drv->minor = -1;

12
include/media/ir-core.h
View File

@ -44,6 +44,8 @@ enum rc_driver_type {
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
* @rx_resolution : resolution (in ns) of input sampler
* @tx_resolution: resolution (in ns) of output sampler
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
@ -52,9 +54,12 @@ enum rc_driver_type {
* is opened.
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
* @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
* @s_rx_carrier: inform driver about carrier it is expected to handle
* @tx_ir: transmit IR
* @s_idle: optional: enable/disable hardware idle mode, upon which,
* device doesn't interrupt host untill it sees IR data
device doesn't interrupt host until it sees IR pulses
* @s_learning_mode: enable wide band receiver used for learning
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
@ -65,6 +70,8 @@ struct ir_dev_props {
u32 min_timeout;
u32 max_timeout;
u32 rx_resolution;
u32 tx_resolution;
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
@ -72,8 +79,11 @@ struct ir_dev_props {
void (*close)(void *priv);
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
void (*s_idle)(void *priv, int enable);
int (*s_learning_mode)(void *priv, int enable);
};
struct ir_input_dev {

5
include/media/lirc.h
View File

@ -77,6 +77,7 @@
#define LIRC_CAN_SET_REC_FILTER 0x08000000
#define LIRC_CAN_MEASURE_CARRIER 0x02000000
#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
@ -145,7 +146,7 @@
* if enabled from the next key press on the driver will send
* LIRC_MODE2_FREQUENCY packets
*/
#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
/*
* to set a range use
@ -162,4 +163,6 @@
#define LIRC_SETUP_START _IO('i', 0x00000021)
#define LIRC_SETUP_END _IO('i', 0x00000022)
#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
#endif