[PATCH] ARM SMP: Add support for startup of secondary processors

Create a temporary page table to startup secondary processors.  This
page table must have a 1:1 virtual/physical mapping for the kernel
in addition to the standard mappings to ensure that the secondary
CPU can enable its MMU safely.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Russell King 2005-06-18 09:33:31 +01:00
parent 5ab6091db0
commit e65f38ed0b
3 changed files with 165 additions and 0 deletions

View file

@ -2,6 +2,8 @@
* linux/arch/arm/kernel/head.S
*
* Copyright (C) 1994-2002 Russell King
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -165,6 +167,48 @@ __mmap_switched:
stmia r6, {r0, r4} @ Save control register values
b start_kernel
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
beq __error
/*
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
ldmia r4, {r5, r6, r13} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r6, r4] @ get secondary_data.pgdir
adr lr, __enable_mmu @ return address
add pc, r10, #12 @ initialise processor
@ (return control reg)
/*
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r6, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
.type __secondary_data, %object
__secondary_data:
.long .
.long secondary_data
.long __secondary_switched
#endif /* defined(CONFIG_SMP) */
/*

View file

@ -24,6 +24,9 @@
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
@ -36,6 +39,13 @@
cpumask_t cpu_present_mask;
cpumask_t cpu_online_map;
/*
* as from 2.5, kernels no longer have an init_tasks structure
* so we need some other way of telling a new secondary core
* where to place its SVC stack
*/
struct secondary_data secondary_data;
/*
* structures for inter-processor calls
* - A collection of single bit ipi messages.
@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
int __init __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
pgd_t *pgd;
pmd_t *pmd;
int ret;
/*
@ -83,10 +95,55 @@ int __init __cpu_up(unsigned int cpu)
return PTR_ERR(idle);
}
/*
* Allocate initial page tables to allow the new CPU to
* enable the MMU safely. This essentially means a set
* of our "standard" page tables, with the addition of
* a 1:1 mapping for the physical address of the kernel.
*/
pgd = pgd_alloc(&init_mm);
pmd = pmd_offset(pgd, PHYS_OFFSET);
*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
/*
* We need to tell the secondary core where to find
* its stack and the page tables.
*/
secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8;
secondary_data.pgdir = virt_to_phys(pgd);
wmb();
/*
* Now bring the CPU into our world.
*/
ret = boot_secondary(cpu, idle);
if (ret == 0) {
unsigned long timeout;
/*
* CPU was successfully started, wait for it
* to come online or time out.
*/
timeout = jiffies + HZ;
while (time_before(jiffies, timeout)) {
if (cpu_online(cpu))
break;
udelay(10);
barrier();
}
if (!cpu_online(cpu))
ret = -EIO;
}
secondary_data.stack = 0;
secondary_data.pgdir = 0;
*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
pgd_free(pgd);
if (ret) {
printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu);
/*
@ -97,6 +154,56 @@ int __init __cpu_up(unsigned int cpu)
return ret;
}
/*
* This is the secondary CPU boot entry. We're using this CPUs
* idle thread stack, but a set of temporary page tables.
*/
asmlinkage void __init secondary_start_kernel(void)
{
struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();
printk("CPU%u: Booted secondary processor\n", cpu);
/*
* All kernel threads share the same mm context; grab a
* reference and switch to it.
*/
atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpu_set(cpu, mm->cpu_vm_mask);
cpu_switch_mm(mm->pgd, mm);
enter_lazy_tlb(mm, current);
cpu_init();
/*
* Give the platform a chance to do its own initialisation.
*/
platform_secondary_init(cpu);
/*
* Enable local interrupts.
*/
local_irq_enable();
local_fiq_enable();
calibrate_delay();
smp_store_cpu_info(cpu);
/*
* OK, now it's safe to let the boot CPU continue
*/
cpu_set(cpu, cpu_online_map);
/*
* OK, it's off to the idle thread for us
*/
cpu_idle();
}
/*
* Called by both boot and secondaries to move global data into
* per-processor storage.

View file

@ -55,4 +55,18 @@ extern void smp_cross_call(cpumask_t callmap);
*/
extern int boot_secondary(unsigned int cpu, struct task_struct *);
/*
* Perform platform specific initialisation of the specified CPU.
*/
extern void platform_secondary_init(unsigned int cpu);
/*
* Initial data for bringing up a secondary CPU.
*/
struct secondary_data {
unsigned long pgdir;
void *stack;
};
extern struct secondary_data secondary_data;
#endif /* ifndef __ASM_ARM_SMP_H */