redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

ASoC: Intel: Skylake: Support multi-core in Broxton

Browse source 
Add multicore DSP support in Broxton DSP operations.

Signed-off-by: Jayachandran B <jayachandran.b@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Jayachandran B 2016-06-21 10:17:43 +05:30 committed by Mark Brown
parent 40a166039a
commit e68aca08d7
1 changed files with 103 additions and 41 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

144
sound/soc/intel/skylake/bxt-sst.c
View file

@ -37,11 +37,19 @@
#define BXT_ADSP_SRAM1_BASE 0xA0000
#define BXT_INSTANCE_ID 0
#define BXT_BASE_FW_MODULE_ID 0
static unsigned int bxt_get_errorcode(struct sst_dsp *ctx)
{
return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE);
}
/*
* First boot sequence has some extra steps. Core 0 waits for power
* status on core 1, so power up core 1 also momentarily, keep it in
* reset/stall and then turn it off
*/
static int sst_bxt_prepare_fw(struct sst_dsp *ctx,
const void *fwdata, u32 fwsize)
{
@ -49,7 +57,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx,
u32 reg;
stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, fwsize, &ctx->dmab);
if (stream_tag < 0) {
if (stream_tag <= 0) {
dev_err(ctx->dev, "Failed to prepare DMA FW loading err: %x\n",
stream_tag);
return stream_tag;
@ -58,16 +66,19 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx,
ctx->dsp_ops.stream_tag = stream_tag;
memcpy(ctx->dmab.area, fwdata, fwsize);
ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK);
/* Step 1: Power up core 0 and core1 */
ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK |
SKL_DSP_CORE_MASK(1));
if (ret < 0) {
dev_err(ctx->dev, "Boot dsp core failed ret: %d\n", ret);
dev_err(ctx->dev, "dsp core0/1 power up failed\n");
goto base_fw_load_failed;
}
/* Purge FW request */
/* Step 2: Purge FW request */
sst_dsp_shim_write(ctx, SKL_ADSP_REG_HIPCI, SKL_ADSP_REG_HIPCI_BUSY |
(BXT_IPC_PURGE_FW | ((stream_tag - 1) << 9)));
/* Step 3: Unset core0 reset state & unstall/run core0 */
ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK);
if (ret < 0) {
dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret);
@ -75,6 +86,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx,
goto base_fw_load_failed;
}
/* Step 4: Wait for DONE Bit */
for (i = BXT_INIT_TIMEOUT; i > 0; --i) {
reg = sst_dsp_shim_read(ctx, SKL_ADSP_REG_HIPCIE);
@ -94,10 +106,18 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx,
SKL_ADSP_REG_HIPCIE_DONE);
}
/* enable Interrupt */
/* Step 5: power down core1 */
ret = skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
if (ret < 0) {
dev_err(ctx->dev, "dsp core1 power down failed\n");
goto base_fw_load_failed;
}
/* Step 6: Enable Interrupt */
skl_ipc_int_enable(ctx);
skl_ipc_op_int_enable(ctx);
/* Step 7: Wait for ROM init */
for (i = BXT_INIT_TIMEOUT; i > 0; --i) {
if (SKL_FW_INIT ==
(sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS) &
@ -194,7 +214,6 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx)
skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK);
ret = -EIO;
} else {
skl_dsp_set_state_locked(ctx, SKL_DSP_RUNNING);
ret = 0;
skl->fw_loaded = true;
}
@ -209,67 +228,110 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
{
struct skl_sst *skl = ctx->thread_context;
int ret;
skl->boot_complete = false;
struct skl_ipc_dxstate_info dx;
unsigned int core_mask = SKL_DSP_CORE_MASK(core_id);
if (skl->fw_loaded == false) {
dev_dbg(ctx->dev, "Re-loading fw\n");
ret = bxt_load_base_firmware(ctx);
if (ret < 0)
dev_err(ctx->dev, "reload fw failed: %d\n", ret);
return ret;
}
ret = skl_dsp_enable_core(ctx, SKL_DSP_CORE0_MASK);
if (ret < 0) {
dev_err(ctx->dev, "enable dsp core failed ret: %d\n", ret);
return ret;
/* If core 0 is being turned on, turn on core 1 as well */
if (core_id == SKL_DSP_CORE0_ID)
ret = skl_dsp_core_power_up(ctx, core_mask |
SKL_DSP_CORE_MASK(1));
else
ret = skl_dsp_core_power_up(ctx, core_mask);
if (ret < 0)
goto err;
if (core_id == SKL_DSP_CORE0_ID) {
/*
* Enable interrupt after SPA is set and before
* DSP is unstalled
*/
skl_ipc_int_enable(ctx);
skl_ipc_op_int_enable(ctx);
skl->boot_complete = false;
}
/* enable interrupt */
skl_ipc_int_enable(ctx);
skl_ipc_op_int_enable(ctx);
ret = skl_dsp_start_core(ctx, core_mask);
if (ret < 0)
goto err;
ret = wait_event_timeout(skl->boot_wait, skl->boot_complete,
msecs_to_jiffies(SKL_IPC_BOOT_MSECS));
if (ret == 0) {
dev_err(ctx->dev, "ipc: error DSP boot timeout\n");
dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
return -EIO;
if (core_id == SKL_DSP_CORE0_ID) {
ret = wait_event_timeout(skl->boot_wait,
skl->boot_complete,
msecs_to_jiffies(SKL_IPC_BOOT_MSECS));
/* If core 1 was turned on for booting core 0, turn it off */
skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
if (ret == 0) {
dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__);
dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
ret = -EIO;
goto err;
}
}
skl_dsp_set_state_locked(ctx, SKL_DSP_RUNNING);
/* Tell FW if additional core in now On */
if (core_id != SKL_DSP_CORE0_ID) {
dx.core_mask = core_mask;
dx.dx_mask = core_mask;
ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID,
BXT_BASE_FW_MODULE_ID, &dx);
if (ret < 0) {
dev_err(ctx->dev, "IPC set_dx for core %d fail: %d\n",
core_id, ret);
goto err;
}
}
skl->cores.state[core_id] = SKL_DSP_RUNNING;
return 0;
err:
if (core_id == SKL_DSP_CORE0_ID)
core_mask |= SKL_DSP_CORE_MASK(1);
skl_dsp_disable_core(ctx, core_mask);
return ret;
}
static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id)
{
int ret;
struct skl_ipc_dxstate_info dx;
struct skl_sst *skl = ctx->thread_context;
int ret = 0;
unsigned int core_mask = SKL_DSP_CORE_MASK(core_id);
if (!is_skl_dsp_running(ctx))
return ret;
dx.core_mask = SKL_DSP_CORE0_MASK;
dx.core_mask = core_mask;
dx.dx_mask = SKL_IPC_D3_MASK;
ret = skl_ipc_set_dx(&skl->ipc, SKL_INSTANCE_ID,
SKL_BASE_FW_MODULE_ID, &dx);
dev_dbg(ctx->dev, "core mask=%x dx_mask=%x\n",
dx.core_mask, dx.dx_mask);
ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID,
BXT_BASE_FW_MODULE_ID, &dx);
if (ret < 0)
dev_err(ctx->dev,
"Failed to set DSP to D3:core id = %d;Continue reset\n",
core_id);
ret = skl_dsp_disable_core(ctx, core_mask);
if (ret < 0) {
dev_err(ctx->dev, "Failed to set DSP to D3 state: %d\n", ret);
dev_err(ctx->dev, "Failed to disable core %d", ret);
return ret;
}
ret = skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK);
if (ret < 0) {
dev_err(ctx->dev, "disbale dsp core failed: %d\n", ret);
ret = -EIO;
}
skl_dsp_set_state_locked(ctx, SKL_DSP_RESET);
skl->cores.state[core_id] = SKL_DSP_RESET;
return 0;
}