Merge branch 'linus' into tracing/ftrace

This commit is contained in:
Ingo Molnar 2008-06-16 11:15:58 +02:00
commit e765ee90da
934 changed files with 13676 additions and 7304 deletions

1
.gitignore vendored
View file

@ -52,6 +52,7 @@ series
# cscope files
cscope.*
ncscope.*
*.orig
*~

View file

@ -14,6 +14,10 @@ MAJOR:MINOR
non-block filesystems which provide their own BDI, such as NFS
and FUSE.
MAJOR:MINOR-fuseblk
Value of st_dev on fuseblk filesystems.
default
The default backing dev, used for non-block device backed

View file

@ -703,6 +703,31 @@
</sect1>
</chapter>
<chapter id="trylock-functions">
<title>The trylock Functions</title>
<para>
There are functions that try to acquire a lock only once and immediately
return a value telling about success or failure to acquire the lock.
They can be used if you need no access to the data protected with the lock
when some other thread is holding the lock. You should acquire the lock
later if you then need access to the data protected with the lock.
</para>
<para>
<function>spin_trylock()</function> does not spin but returns non-zero if
it acquires the spinlock on the first try or 0 if not. This function can
be used in all contexts like <function>spin_lock</function>: you must have
disabled the contexts that might interrupt you and acquire the spin lock.
</para>
<para>
<function>mutex_trylock()</function> does not suspend your task
but returns non-zero if it could lock the mutex on the first try
or 0 if not. This function cannot be safely used in hardware or software
interrupt contexts despite not sleeping.
</para>
</chapter>
<chapter id="Examples">
<title>Common Examples</title>
<para>

View file

@ -327,6 +327,52 @@ Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
If you are a subsystem or branch maintainer, sometimes you need to slightly
modify patches you receive in order to merge them, because the code is not
exactly the same in your tree and the submitters'. If you stick strictly to
rule (c), you should ask the submitter to rediff, but this is a totally
counter-productive waste of time and energy. Rule (b) allows you to adjust
the code, but then it is very impolite to change one submitter's code and
make him endorse your bugs. To solve this problem, it is recommended that
you add a line between the last Signed-off-by header and yours, indicating
the nature of your changes. While there is nothing mandatory about this, it
seems like prepending the description with your mail and/or name, all
enclosed in square brackets, is noticeable enough to make it obvious that
you are responsible for last-minute changes. Example :
Signed-off-by: Random J Developer <random@developer.example.org>
[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
This practise is particularly helpful if you maintain a stable branch and
want at the same time to credit the author, track changes, merge the fix,
and protect the submitter from complaints. Note that under no circumstances
can you change the author's identity (the From header), as it is the one
which appears in the changelog.
Special note to back-porters: It seems to be a common and useful practise
to insert an indication of the origin of a patch at the top of the commit
message (just after the subject line) to facilitate tracking. For instance,
here's what we see in 2.6-stable :
Date: Tue May 13 19:10:30 2008 +0000
SCSI: libiscsi regression in 2.6.25: fix nop timer handling
commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
And here's what appears in 2.4 :
Date: Tue May 13 22:12:27 2008 +0200
wireless, airo: waitbusy() won't delay
[backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
Whatever the format, this information provides a valuable help to people
tracking your trees, and to people trying to trouble-shoot bugs in your
tree.
13) When to use Acked-by: and Cc:

View file

@ -21,6 +21,11 @@ This driver is known to work with the following cards:
* SA E200
* SA E200i
* SA E500
* SA P212
* SA P410
* SA P410i
* SA P411
* SA P812
Detecting drive failures:
-------------------------

View file

@ -129,14 +129,6 @@ to its default value of '80' it means that between the checking
intervals the CPU needs to be on average more than 80% in use to then
decide that the CPU frequency needs to be increased.
sampling_down_factor: this parameter controls the rate that the CPU
makes a decision on when to decrease the frequency. When set to its
default value of '5' it means that at 1/5 the sampling_rate the kernel
makes a decision to lower the frequency. Five "lower rate" decisions
have to be made in a row before the CPU frequency is actually lower.
If set to '1' then the frequency decreases as quickly as it increases,
if set to '2' it decreases at half the rate of the increase.
ignore_nice_load: this parameter takes a value of '0' or '1'. When
set to '0' (its default), all processes are counted towards the
'cpu utilisation' value. When set to '1', the processes that are

View file

@ -199,7 +199,7 @@ using the sched_setaffinity, mbind and set_mempolicy system calls.
The following rules apply to each cpuset:
- Its CPUs and Memory Nodes must be a subset of its parents.
- It can only be marked exclusive if its parent is.
- It can't be marked exclusive unless its parent is.
- If its cpu or memory is exclusive, they may not overlap any sibling.
These rules, and the natural hierarchy of cpusets, enable efficient
@ -345,7 +345,7 @@ is modified to perform an inline check for this PF_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
Similarly, setting 'memory_spread_cache' turns on the flag
Similarly, setting 'memory_spread_slab' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
@ -709,7 +709,10 @@ Now you want to do something with this cpuset.
In this directory you can find several files:
# ls
cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks
cpu_exclusive memory_migrate mems tasks
cpus memory_pressure notify_on_release
mem_exclusive memory_spread_page sched_load_balance
mem_hardwall memory_spread_slab sched_relax_domain_level
Reading them will give you information about the state of this cpuset:
the CPUs and Memory Nodes it can use, the processes that are using

View file

@ -139,8 +139,16 @@ commit=nrsec (*) Ext4 can be told to sync all its data and metadata
Setting it to very large values will improve
performance.
barrier=1 This enables/disables barriers. barrier=0 disables
it, barrier=1 enables it.
barrier=<0|1(*)> This enables/disables the use of write barriers in
the jbd code. barrier=0 disables, barrier=1 enables.
This also requires an IO stack which can support
barriers, and if jbd gets an error on a barrier
write, it will disable again with a warning.
Write barriers enforce proper on-disk ordering
of journal commits, making volatile disk write caches
safe to use, at some performance penalty. If
your disks are battery-backed in one way or another,
disabling barriers may safely improve performance.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.

View file

@ -36,6 +36,7 @@ files, each with their own function.
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
subsystem_vendor PCI subsystem vendor (ascii, ro)

View file

@ -0,0 +1,37 @@
Kernel driver ibmaem
======================
Supported systems:
* Any recent IBM System X server with Active Energy Manager support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Prefix: 'ibmaem'
Datasheet: Not available
Author: Darrick J. Wong
Description
-----------
This driver implements sensor reading support for the energy and power
meters available on various IBM System X hardware through the BMC. All
sensor banks will be exported as platform devices; this driver can talk
to both v1 and v2 interfaces. This driver is completely separate from the
older ibmpex driver.
The v1 AEM interface has a simple set of features to monitor energy use.
There is a register that displays an estimate of raw energy consumption
since the last BMC reset, and a power sensor that returns average power
use over a configurable interval.
The v2 AEM interface is a bit more sophisticated, being able to present
a wider range of energy and power use registers, the power cap as
set by the AEM software, and temperature sensors.
Special Features
----------------
The "power_cap" value displays the current system power cap, as set by
the Active Energy Manager software. Setting the power cap from the host
is not currently supported.

View file

@ -1,6 +1,105 @@
kernel-doc nano-HOWTO
=====================
How to format kernel-doc comments
---------------------------------
In order to provide embedded, 'C' friendly, easy to maintain,
but consistent and extractable documentation of the functions and
data structures in the Linux kernel, the Linux kernel has adopted
a consistent style for documenting functions and their parameters,
and structures and their members.
The format for this documentation is called the kernel-doc format.
It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
This style embeds the documentation within the source files, using
a few simple conventions. The scripts/kernel-doc perl script, some
SGML templates in Documentation/DocBook, and other tools understand
these conventions, and are used to extract this embedded documentation
into various documents.
In order to provide good documentation of kernel functions and data
structures, please use the following conventions to format your
kernel-doc comments in Linux kernel source.
We definitely need kernel-doc formatted documentation for functions
that are exported to loadable modules using EXPORT_SYMBOL.
We also look to provide kernel-doc formatted documentation for
functions externally visible to other kernel files (not marked
"static").
We also recommend providing kernel-doc formatted documentation
for private (file "static") routines, for consistency of kernel
source code layout. But this is lower priority and at the
discretion of the MAINTAINER of that kernel source file.
Data structures visible in kernel include files should also be
documented using kernel-doc formatted comments.
The opening comment mark "/**" is reserved for kernel-doc comments.
Only comments so marked will be considered by the kernel-doc scripts,
and any comment so marked must be in kernel-doc format. Do not use
"/**" to be begin a comment block unless the comment block contains
kernel-doc formatted comments. The closing comment marker for
kernel-doc comments can be either "*/" or "**/".
Kernel-doc comments should be placed just before the function
or data structure being described.
Example kernel-doc function comment:
/**
* foobar() - short function description of foobar
* @arg1: Describe the first argument to foobar.
* @arg2: Describe the second argument to foobar.
* One can provide multiple line descriptions
* for arguments.
*
* A longer description, with more discussion of the function foobar()
* that might be useful to those using or modifying it. Begins with
* empty comment line, and may include additional embedded empty
* comment lines.
*
* The longer description can have multiple paragraphs.
**/
The first line, with the short description, must be on a single line.
The @argument descriptions must begin on the very next line following
this opening short function description line, with no intervening
empty comment lines.
Example kernel-doc data structure comment.
/**
* struct blah - the basic blah structure
* @mem1: describe the first member of struct blah
* @mem2: describe the second member of struct blah,
* perhaps with more lines and words.
*
* Longer description of this structure.
**/
The kernel-doc function comments describe each parameter to the
function, in order, with the @name lines.
The kernel-doc data structure comments describe each structure member
in the data structure, with the @name lines.
The longer description formatting is "reflowed", losing your line
breaks. So presenting carefully formatted lists within these
descriptions won't work so well; derived documentation will lose
the formatting.
See the section below "How to add extractable documentation to your
source files" for more details and notes on how to format kernel-doc
comments.
Components of the kernel-doc system
-----------------------------------
Many places in the source tree have extractable documentation in the
form of block comments above functions. The components of this system
are:

View file

@ -715,14 +715,14 @@
* Name: "Gary's Encyclopedia - The Linux Kernel"
Author: Gary (I suppose...).
URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
Keywords: links, not found here?.
URL: http://slencyclopedia.berlios.de/index.html
Keywords: linux, community, everything!
Description: Gary's Encyclopedia exists to allow the rapid finding
of documentation and other information of interest to GNU/Linux
users. It has about 4000 links to external pages in 150 major
categories. This link is for kernel-specific links, documents,
sites... Look there if you could not find here what you were
looking for.
sites... This list is now hosted by developer.Berlios.de,
but seems not to have been updated since sometime in 1999.
* Name: "The home page of Linux-MM"
Author: The Linux-MM team.

View file

@ -305,7 +305,7 @@ should not be manipulated by any other user.
A kset keeps its children in a standard kernel linked list. Kobjects point
back to their containing kset via their kset field. In almost all cases,
the kobjects belonging to a ket have that kset (or, strictly, its embedded
the kobjects belonging to a kset have that kset (or, strictly, its embedded
kobject) in their parent.
As a kset contains a kobject within it, it should always be dynamically

View file

@ -503,7 +503,7 @@ generate input device EV_KEY events.
In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
events for switches:
SW_RADIO T60 and later hardare rfkill rocker switch
SW_RFKILL_ALL T60 and later hardare rfkill rocker switch
SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hot-key ACPI HKEY event map:

View file

@ -157,6 +157,9 @@ struct virtqueue
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
/* Outstanding buffers */
unsigned int inflight;
};
/* Remember the arguments to the program so we can "reboot" */
@ -702,6 +705,7 @@ static unsigned get_vq_desc(struct virtqueue *vq,
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
vq->inflight++;
return head;
}
@ -719,6 +723,7 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len)
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
@ -726,8 +731,9 @@ static void trigger_irq(int fd, struct virtqueue *vq)
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
/* If they don't want an interrupt, don't send one. */
if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
/* If they don't want an interrupt, don't send one, unless empty. */
if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
&& vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
@ -1107,6 +1113,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
vq->inflight = 0;
/* Initialize the configuration. */
vq->config.num = num_descs;
@ -1368,6 +1375,7 @@ static void setup_tun_net(const char *arg)
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */

View file

@ -46,7 +46,7 @@ These are the ARCnet drivers for Linux.
This new release (2.91) has been put together by David Woodhouse
<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support
<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
for yet another chipset. Now the generic support has been separated from the
individual chipset drivers, and the source files aren't quite so packed with
#ifdefs! I've changed this file a bit, but kept it in the first person from

View file

@ -1,6 +1,6 @@
In order to use the Ethernet bridging functionality, you'll need the
userspace tools. These programs and documentation are available
at http://bridge.sourceforge.net. The download page is
at http://www.linux-foundation.org/en/Net:Bridge. The download page is
http://prdownloads.sourceforge.net/bridge.
If you still have questions, don't hesitate to post to the mailing list

View file

@ -60,7 +60,7 @@
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18]
62 -> PowerColor Real Angel 330 [14f1:ea3d]
62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
65 -> DViCO FusionHDTV 7 Gold [18ac:d610]

View file

@ -1,7 +1,9 @@
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
1) The only hardware currently supported is the Hauppauge HVR-1600.
1) The only hardware currently supported is the Hauppauge HVR-1600
card and the Compro VideoMate H900 (note that this card only
supports analog input, it has no digital tuner!).
2) Some people have problems getting the i2c bus to work. Cause unknown.
The symptom is that the eeprom cannot be read and the card is

View file

@ -0,0 +1,77 @@
pagemap, from the userspace perspective
---------------------------------------
pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
userspace programs to examine the page tables and related information by
reading files in /proc.
There are three components to pagemap:
* /proc/pid/pagemap. This file lets a userspace process find out which
physical frame each virtual page is mapped to. It contains one 64-bit
value for each virtual page, containing the following data (from
fs/proc/task_mmu.c, above pagemap_read):
* Bits 0-55 page frame number (PFN) if present
* Bits 0-4 swap type if swapped
* Bits 5-55 swap offset if swapped
* Bits 55-60 page shift (page size = 1<<page shift)
* Bit 61 reserved for future use
* Bit 62 page swapped
* Bit 63 page present
If the page is not present but in swap, then the PFN contains an
encoding of the swap file number and the page's offset into the
swap. Unmapped pages return a null PFN. This allows determining
precisely which pages are mapped (or in swap) and comparing mapped
pages between processes.
Efficient users of this interface will use /proc/pid/maps to
determine which areas of memory are actually mapped and llseek to
skip over unmapped regions.
* /proc/kpagecount. This file contains a 64-bit count of the number of
times each page is mapped, indexed by PFN.
* /proc/kpageflags. This file contains a 64-bit set of flags for each
page, indexed by PFN.
The flags are (from fs/proc/proc_misc, above kpageflags_read):
0. LOCKED
1. ERROR
2. REFERENCED
3. UPTODATE
4. DIRTY
5. LRU
6. ACTIVE
7. SLAB
8. WRITEBACK
9. RECLAIM
10. BUDDY
Using pagemap to do something useful:
The general procedure for using pagemap to find out about a process' memory
usage goes like this:
1. Read /proc/pid/maps to determine which parts of the memory space are
mapped to what.
2. Select the maps you are interested in -- all of them, or a particular
library, or the stack or the heap, etc.
3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
4. Read a u64 for each page from pagemap.
5. Open /proc/kpagecount and/or /proc/kpageflags. For each PFN you just
read, seek to that entry in the file, and read the data you want.
For example, to find the "unique set size" (USS), which is the amount of
memory that a process is using that is not shared with any other process,
you can go through every map in the process, find the PFNs, look those up
in kpagecount, and tally up the number of pages that are only referenced
once.
Other notes:
Reading from any of the files will return -EINVAL if you are not starting
the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
into the file), or if the size of the read is not a multiple of 8 bytes.

View file

@ -228,21 +228,21 @@ ACPI BATTERY DRIVERS
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI EC DRIVER
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI FAN DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI PCI HOTPLUG DRIVER
@ -255,14 +255,14 @@ ACPI THERMAL DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI VIDEO DRIVER
P: Rui Zhang
M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI WMI DRIVER
@ -274,7 +274,7 @@ S: Maintained
AD1889 ALSA SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
P: Thibaut Varene
M: T-Bone@parisc-linux.org
W: http://wiki.parisc-linux.org/AD1889
@ -995,8 +995,8 @@ L: netdev@vger.kernel.org
S: Supported
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
P: Eliezer Tamir
M: eliezert@broadcom.com
P: Eilon Greenstein
M: eilong@broadcom.com
L: netdev@vger.kernel.org
S: Supported
@ -1202,6 +1202,7 @@ M: pj@sgi.com
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
CRAMFS FILESYSTEM
@ -1240,6 +1241,20 @@ L: video4linux-list@redhat.com
W: http://linuxtv.org
S: Maintained
CXGB3 ETHERNET DRIVER (CXGB3)
P: Divy Le Ray
M: divy@chelsio.com
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
P: Steve Wise
M: swise@chelsio.com
L: general@lists.openfabrics.org
W: http://www.openfabrics.org
S: Supported
CYBERPRO FB DRIVER
P: Russell King
M: rmk@arm.linux.org.uk
@ -1597,7 +1612,7 @@ ETHERNET BRIDGE
P: Stephen Hemminger
M: shemminger@linux-foundation.org
L: bridge@lists.linux-foundation.org
W: http://bridge.sourceforge.net/
W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
ETHERTEAM 16I DRIVER
@ -1813,7 +1828,7 @@ S: Maintained
HARMONY SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
L: linux-parisc@vger.kernel.org
S: Maintained
@ -2551,7 +2566,6 @@ LINUX SECURITY MODULE (LSM) FRAMEWORK
P: Chris Wright
M: chrisw@sous-sol.org
L: linux-security-module@vger.kernel.org
W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
@ -2852,8 +2866,8 @@ S: Maintained
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: flatif@neteffect.com
P: Nishi Gupta
M: ngupta@neteffect.com
P: Chien Tung
M: ctung@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
@ -3107,7 +3121,7 @@ S: Maintained
PARISC ARCHITECTURE
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
P: Matthew Wilcox
M: matthew@wil.cx
P: Grant Grundler
@ -3251,7 +3265,7 @@ S: Maintained
PPP OVER ETHERNET
P: Michal Ostrowski
M: mostrows@speakeasy.net
M: mostrows@earthlink.net
S: Maintained
PPP OVER L2TP
@ -3316,9 +3330,11 @@ L: video4linux-list@redhat.com
W: http://www.isely.net/pvrusb2/
S: Maintained
PXA2xx SUPPORT
P: Nicolas Pitre
M: nico@cam.org
PXA2xx/PXA3xx SUPPORT
P: Eric Miao
M: eric.miao@marvell.com
P: Russell King
M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
@ -3425,10 +3441,7 @@ L: rtc-linux@googlegroups.com
S: Maintained
REISERFS FILE SYSTEM
P: Hans Reiser
M: reiserfs-dev@namesys.com
L: reiserfs-devel@vger.kernel.org
W: http://www.namesys.com
S: Supported
RFKILL
@ -3648,13 +3661,6 @@ M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
SIS 5513 IDE CONTROLLER DRIVER
P: Lionel Bouton
M: Lionel.Bouton@inet6.fr
W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
W: http://gyver.homeip.net/sis5513/index.html
S: Maintained
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
@ -4020,7 +4026,7 @@ TULIP NETWORK DRIVERS
P: Grant Grundler
M: grundler@parisc-linux.org
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
L: netdev@vger.kernel.org
S: Maintained
@ -4361,6 +4367,14 @@ M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
S: Maintained
UTIL-LINUX-NG PACKAGE
P: Karel Zak
M: kzak@redhat.com
L: util-linux-ng@vger.kernel.org
W: http://kernel.org/~kzak/util-linux-ng/
T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
S: Maintained
VFAT/FAT/MSDOS FILESYSTEM:
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp

View file

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
EXTRAVERSION = -rc3
NAME = Funky Weasel is Jiggy wit it
EXTRAVERSION = -rc6
NAME = Rotary Wombat
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

View file

@ -33,10 +33,6 @@ __XScale_start:
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
#ifdef CONFIG_ARCH_COTULLA_IDP
mov r7, #MACH_TYPE_COTULLA_IDP
#endif
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000

View file

@ -16,16 +16,32 @@
#include <asm/mach/arch.h>
#include <asm/arch/at91x40.h>
#include <asm/arch/at91_st.h>
#include <asm/arch/timex.h>
#include "generic.h"
/*
* This is used in the gpio code, stub locally.
* Export the clock functions for the AT91X40. Some external code common
* to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
void clk_disable(struct clk *clk)
{
}
unsigned long clk_get_rate(struct clk *clk)
{
return AT91X40_MASTER_CLOCK;
}
struct clk *clk_get(struct device *dev, const char *id)
{
return NULL;
}
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)

View file

@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
lm_set_drvdata(dev, impd1);
printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
printk("IM-PD1 found at 0x%08lx\n",
(unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].owner = THIS_MODULE,

View file

@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
printascii(buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,

View file

@ -24,7 +24,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/tsc2102.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
#define palmte_get_power_status NULL
#endif
static struct tsc2102_config palmte_tsc2102_config = {
.use_internal = 0,
.monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
.temp_at25c = { 2200, 2615 },
.apm_report = palmte_get_power_status,
.alsa_config = &palmte_alsa_config,
};
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
.platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};

View file

@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = {
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};

View file

@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = {
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};

View file

@ -38,7 +38,6 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>

View file

@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label)
mutex_unlock(&ssp_lock);
if (ssp->port_id != port)
if (&ssp->node == &ssp_list)
return NULL;
return ssp;

View file

@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');

View file

@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};

View file

@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};

View file

@ -225,26 +225,28 @@ static void __init collie_init(void)
int ret = 0;
/* cpu initialize */
GAFR = ( GPIO_SSP_TXD | \
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
GPIO_32_768kHz );
GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
GPIO_MCP_CLK | GPIO_32_768kHz;
GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
GPLR = GPIO_GPIO18;
GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
// PPC pin setting
PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
PGSR = COLLIE_GPIO_nREMOCON_ON;
PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
PCFR = PCFR_OPDE;
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_32_768kHz;
platform_scoop_config = &collie_pcmcia_config;

View file

@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <asm/io.h>

View file

@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
/* rename any peripherals used differing from the s3c2410 */
s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 23:20:41 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:30:59 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@ -73,11 +73,21 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@ -101,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -141,16 +156,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -164,9 +182,10 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@ -202,6 +221,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@ -255,87 +275,40 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@ -343,54 +316,25 @@ CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
@ -407,7 +351,6 @@ CONFIG_LLC=m
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@ -415,6 +358,7 @@ CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -450,6 +394,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -531,11 +476,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -568,11 +520,13 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@ -586,6 +540,7 @@ CONFIG_MACB=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@ -599,7 +554,6 @@ CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -621,6 +575,7 @@ CONFIG_SLHC=m
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -633,6 +588,7 @@ CONFIG_SLHC=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -640,21 +596,13 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@ -665,27 +613,23 @@ CONFIG_I2C_GPIO=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -702,9 +646,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -724,12 +686,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -753,14 +725,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -772,6 +742,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -787,6 +758,7 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -797,11 +769,13 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@ -816,6 +790,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -844,19 +820,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -865,10 +844,6 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
@ -885,14 +860,11 @@ CONFIG_JBD=m
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@ -948,8 +920,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@ -957,12 +931,10 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@ -1030,11 +1002,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
@ -1042,6 +1009,7 @@ CONFIG_KPROBES=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@ -1052,7 +1020,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -1066,12 +1036,14 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@ -1083,52 +1055,90 @@ CONFIG_FRAME_POINTER=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
@ -1137,10 +1147,6 @@ CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 23:07:43 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:30:20 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@ -70,11 +72,21 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@ -98,10 +110,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -147,16 +164,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -170,9 +190,10 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@ -208,6 +229,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@ -252,8 +274,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@ -279,6 +303,7 @@ CONFIG_LLC=m
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -314,6 +339,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -368,6 +394,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@ -395,13 +422,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_IDE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -444,6 +476,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@ -469,11 +504,13 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@ -487,6 +524,7 @@ CONFIG_MACB=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@ -500,7 +538,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -556,6 +593,7 @@ CONFIG_MOUSE_GPIO=m
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -568,6 +606,7 @@ CONFIG_MOUSE_GPIO=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -575,21 +614,13 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@ -600,27 +631,23 @@ CONFIG_I2C_GPIO=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -637,9 +664,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -659,12 +704,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -682,8 +737,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@ -749,7 +804,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
@ -761,14 +820,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -781,6 +838,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -796,6 +854,7 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -806,17 +865,20 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
#
@ -825,6 +887,8 @@ CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -853,19 +917,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -874,10 +941,6 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
@ -895,14 +958,11 @@ CONFIG_JBD=m
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@ -957,8 +1017,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@ -966,7 +1028,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@ -1028,11 +1089,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
@ -1040,6 +1096,7 @@ CONFIG_KPROBES=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@ -1050,7 +1107,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -1064,12 +1123,14 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@ -1081,52 +1142,90 @@ CONFIG_FORCED_INLINING=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 22:54:34 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:33:05 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@ -75,11 +75,20 @@ CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@ -103,10 +112,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -152,16 +166,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -175,9 +192,10 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@ -234,8 +252,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@ -260,6 +276,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -295,6 +312,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -349,6 +367,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@ -376,13 +395,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_IDE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -427,6 +451,9 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@ -447,6 +474,7 @@ CONFIG_NETDEVICES=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@ -460,7 +488,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -516,6 +543,7 @@ CONFIG_MOUSE_GPIO=m
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -528,6 +556,7 @@ CONFIG_MOUSE_GPIO=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -535,21 +564,13 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@ -560,27 +581,23 @@ CONFIG_I2C_GPIO=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -597,9 +614,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -619,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -682,7 +727,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
@ -694,14 +743,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -714,6 +761,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -729,6 +777,7 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -739,17 +788,20 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=y
#
@ -758,6 +810,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -786,19 +840,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -807,11 +864,8 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
CONFIG_UIO=m
# CONFIG_UIO_SMX is not set
#
# File systems
@ -828,14 +882,11 @@ CONFIG_JBD=m
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@ -891,8 +942,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@ -943,11 +996,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
@ -955,6 +1003,7 @@ CONFIG_KPROBES=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@ -965,6 +1014,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -978,12 +1028,14 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@ -1000,6 +1052,8 @@ CONFIG_FORCED_INLINING=y
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 23:04:20 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:34:57 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@ -54,24 +54,38 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -115,16 +129,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
# CONFIG_NMI_DEBUGGING is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -134,20 +151,7 @@ CONFIG_CMDLINE=""
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
# CONFIG_CPU_FREQ is not set
#
# Bus options
@ -197,8 +201,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@ -222,6 +224,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -255,6 +258,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -321,6 +325,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -346,6 +351,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -358,6 +364,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_PDC is not set
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -365,15 +372,9 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@ -389,9 +390,24 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
#
# I2C GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -411,12 +427,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -434,8 +460,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@ -467,14 +493,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
@ -485,6 +509,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -499,8 +524,11 @@ CONFIG_USB_ETH=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -519,15 +547,17 @@ CONFIG_RTC_INTF_DEV=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -536,18 +566,14 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@ -588,6 +613,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@ -608,6 +634,8 @@ CONFIG_MAGIC_SYSRQ=y
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set

View file

@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
/*
* Userspace access stuff.
@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(strnlen_user);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);

View file

@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void)
{
return cpufreq_register_driver(&at32_driver);
}
arch_initcall(at32_cpufreq_init);
late_initcall(at32_cpufreq_init);

View file

@ -10,8 +10,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <asm/io.h>
#include <asm/blackfin.h>
#include <asm/gptimers.h>

View file

@ -67,7 +67,7 @@ void __init trap_init(void)
CSYNC();
}
void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
@ -366,7 +366,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
if (saved_dcplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "NULL pointer access\n");
else
#endif
@ -421,7 +421,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
if (saved_icplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "Jump to NULL address\n");
else
#endif
@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
oops_in_progress = 1;
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);

View file

@ -76,4 +76,4 @@ ENTRY(_outsw_8)
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
RTS;
ENDPROC(_outsw)
ENDPROC(_outsw_8)

View file

@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@ -647,10 +644,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.irq = IRQ_PF8,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.chip_select = 2,
.controller_data = &spi_ad7877_chip_info,
},
#endif
@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@ -1018,10 +1016,7 @@ static int __init stamp_init(void)
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View file

@ -87,9 +87,6 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -425,9 +423,7 @@ static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View file

@ -161,9 +161,6 @@ static struct platform_device stamp_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@ -320,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -626,10 +624,8 @@ static int __init stamp_init(void)
SSYNC();
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif

View file

@ -3,7 +3,7 @@
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o

View file

@ -1,183 +0,0 @@
/****************************************************
* LED1 ---- PF6 LED2 ---- PF7 *
* LED3 ---- PF8 LED4 ---- PF9 *
* LED5 ---- PF10 LED6 ---- PF11 *
****************************************************/
#include <linux/linkage.h>
#include <asm/blackfin.h>
/* All functions in this file save the registers they uses.
So there is no need to save any registers before calling them. */
.text;
/* Initialize LEDs. */
ENTRY(_led_init)
LINK 12;
[--SP] = P0;
[--SP] = R0;
[--SP] = R1;
[--SP] = R2;
R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
R2 = ~R1;
P0.H = hi(PORTF_FER);
P0.L = lo(PORTF_FER);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTFIO_DIR);
P0.L = lo(PORTFIO_DIR);
R0 = W[P0](Z);
SSYNC;
R0 = R0 | R1;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTFIO_INEN);
P0.L = lo(PORTFIO_INEN);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
R0 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_init, .-_led_init
/* Set one LED on. Leave other LEDs unchanged.
It expects the LED number passed through R0. */
ENTRY(_led_on)
LINK 12;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R0 = W[P0](Z);
SSYNC;
R0 = R0 | R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_on, .-_led_on
/* Set one LED off. Leave other LEDs unchanged. */
ENTRY(_led_off)
LINK 12;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
R1 = ~R1;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_off, .-_led_off
/* Toggle one LED. Leave other LEDs unchanged. */
ENTRY(_led_toggle)
LINK 12;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R0 = W[P0](Z);
SSYNC;
R0 = R0 ^ R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle, .-_led_toggle
/* Display the number using LEDs in binary format. */
ENTRY(_led_disp_num)
LINK 12;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R2 = 6(X);
R0 <<= R2;
R1 <<= R2;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R2 = W[P0](Z);
SSYNC;
R1 = ~R1;
R2 = R2 & R1;
R2 = R2 | R0;
W[P0] = R2.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_disp_num, .-_led_disp_num
/* Toggle the number using LEDs in binary format. */
ENTRY(_led_toggle_num)
LINK 12;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R1 = 6(X);
R0 <<= R1;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R1 = W[P0](Z);
SSYNC;
R1 = R1 ^ R0;
W[P0] = R1.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle_num, .-_led_toggle_num

View file

@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@ -939,10 +937,7 @@ static int __init stamp_init(void)
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View file

@ -2,5 +2,5 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o

View file

@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
static int __init cm_bf548_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

View file

@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
};
#endif
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -800,10 +799,7 @@ static int __init ezkit_init(void)
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bf54x_spi_board_info,
ARRAY_SIZE(bf54x_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}

View file

@ -1,172 +0,0 @@
/****************************************************
* LED1 ---- PG6 LED2 ---- PG7 *
* LED3 ---- PG8 LED4 ---- PG9 *
* LED5 ---- PG10 LED6 ---- PG11 *
****************************************************/
#include <linux/linkage.h>
#include <asm/blackfin.h>
/* All functions in this file save the registers they uses.
So there is no need to save any registers before calling them. */
.text;
/* Initialize LEDs. */
ENTRY(_led_init)
LINK 0;
[--SP] = P0;
[--SP] = R0;
[--SP] = R1;
[--SP] = R2;
R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
R2 = ~R1;
P0.H = hi(PORTG_FER);
P0.L = lo(PORTG_FER);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTG_DIR_SET);
P0.L = lo(PORTG_DIR_SET);
W[P0] = R1.L;
SSYNC;
P0.H = hi(PORTG_INEN);
P0.L = lo(PORTG_INEN);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
R0 = [SP++];
P0 = [SP++];
RTS;
.size _led_init, .-_led_init
/* Set one LED on. Leave other LEDs unchanged.
It expects the LED number passed through R0. */
ENTRY(_led_on)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG_SET);
P0.L = lo(PORTG_SET);
W[P0] = R1.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_on, .-_led_on
/* Set one LED off. Leave other LEDs unchanged. */
ENTRY(_led_off)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG_CLEAR);
P0.L = lo(PORTG_CLEAR);
W[P0] = R1.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_off, .-_led_off
/* Toggle one LED. Leave other LEDs unchanged. */
ENTRY(_led_toggle)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R0 = W[P0](Z);
SSYNC;
R0 = R0 ^ R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle, .-_led_toggle
/* Display the number using LEDs in binary format. */
ENTRY(_led_disp_num)
LINK 0;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R2 = 6(X);
R0 <<= R2;
R1 <<= R2;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R2 = W[P0](Z);
SSYNC;
R1 = ~R1;
R2 = R2 & R1;
R2 = R2 | R0;
W[P0] = R2.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_disp_num, .-_led_disp_num
/* Toggle the number using LEDs in binary format. */
ENTRY(_led_toggle_num)
LINK 0;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R1 = 6(X);
R0 <<= R1;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R1 = W[P0](Z);
SSYNC;
R1 = R1 ^ R0;
W[P0] = R1.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle_num, .-_led_toggle_num

View file

@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#ifdef CONFIG_SPI_BFIN
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
.bits_per_word = 8,
};
#endif
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = {
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
@ -537,10 +537,7 @@ static int __init ezkit_init(void)
SSYNC();
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View file

@ -1,7 +1,7 @@
/* cmode.S: clock mode management
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Woodhouse (dwmw2@redhat.com)
* Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License

View file

@ -1,7 +1,7 @@
/* sleep.S: power saving mode entry
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Woodhouse (dwmw2@redhat.com)
* Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License

View file

@ -1,7 +1,7 @@
/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Woodhouse (dwmw2@redhat.com)
* Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License

View file

@ -26,6 +26,7 @@
#include <linux/types.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/module.h>
#include <asm/setup.h>
#include <asm/segment.h>
@ -56,7 +57,9 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
*/
static unsigned long empty_bad_page_table;
static unsigned long empty_bad_page;
unsigned long empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
/*****************************************************************************/
/*

View file

@ -465,7 +465,6 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
printk(KERN_ERR
"ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
len, slit->header.length);
memset(numa_slit, 10, sizeof(numa_slit));
return;
}
slit_table = slit;
@ -574,8 +573,14 @@ void __init acpi_numa_arch_fixup(void)
printk(KERN_INFO "Number of memory chunks in system = %d\n",
num_node_memblks);
if (!slit_table)
if (!slit_table) {
for (i = 0; i < MAX_NUMNODES; i++)
for (j = 0; j < MAX_NUMNODES; j++)
node_distance(i, j) = i == j ? LOCAL_DISTANCE :
REMOTE_DISTANCE;
return;
}
memset(numa_slit, -1, sizeof(numa_slit));
for (i = 0; i < slit_table->locality_count; i++) {
if (!pxm_bit_test(i))

View file

@ -1076,48 +1076,6 @@ END(ia64_syscall_setup)
DBG_FAULT(15)
FAULT(15)
/*
* Squatting in this space ...
*
* This special case dispatcher for illegal operation faults allows preserved
* registers to be modified through a callback function (asm only) that is handed
* back from the fault handler in r8. Up to three arguments can be passed to the
* callback function by returning an aggregate with the callback as its first
* element, followed by the arguments.
*/
ENTRY(dispatch_illegal_op_fault)
.prologue
.body
SAVE_MIN_WITH_COVER
ssm psr.ic | PSR_DEFAULT_BITS
;;
srlz.i // guarantee that interruption collection is on
;;
(p15) ssm psr.i // restore psr.i
adds r3=8,r2 // set up second base pointer for SAVE_REST
;;
alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
mov out0=ar.ec
;;
SAVE_REST
PT_REGS_UNWIND_INFO(0)
;;
br.call.sptk.many rp=ia64_illegal_op_fault
.ret0: ;;
alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
mov out0=r9
mov out1=r10
mov out2=r11
movl r15=ia64_leave_kernel
;;
mov rp=r15
mov b6=r8
;;
cmp.ne p6,p0=0,r8
(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
br.sptk.many ia64_leave_kernel
END(dispatch_illegal_op_fault)
.org ia64_ivt+0x4000
/////////////////////////////////////////////////////////////////////////////////////////
// 0x4000 Entry 16 (size 64 bundles) Reserved
@ -1715,6 +1673,48 @@ END(ia32_interrupt)
DBG_FAULT(67)
FAULT(67)
/*
* Squatting in this space ...
*
* This special case dispatcher for illegal operation faults allows preserved
* registers to be modified through a callback function (asm only) that is handed
* back from the fault handler in r8. Up to three arguments can be passed to the
* callback function by returning an aggregate with the callback as its first
* element, followed by the arguments.
*/
ENTRY(dispatch_illegal_op_fault)
.prologue
.body
SAVE_MIN_WITH_COVER
ssm psr.ic | PSR_DEFAULT_BITS
;;
srlz.i // guarantee that interruption collection is on
;;
(p15) ssm psr.i // restore psr.i
adds r3=8,r2 // set up second base pointer for SAVE_REST
;;
alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
mov out0=ar.ec
;;
SAVE_REST
PT_REGS_UNWIND_INFO(0)
;;
br.call.sptk.many rp=ia64_illegal_op_fault
.ret0: ;;
alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
mov out0=r9
mov out1=r10
mov out2=r11
movl r15=ia64_leave_kernel
;;
mov rp=r15
mov b6=r8
;;
cmp.ne p6,p0=0,r8
(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
br.sptk.many ia64_leave_kernel
END(dispatch_illegal_op_fault)
#ifdef CONFIG_IA32_SUPPORT
/*

View file

@ -15,6 +15,9 @@
#define ACCOUNT_SYS_ENTER
#endif
.section ".data.patch.rse", "a"
.previous
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
@ -40,7 +43,7 @@
* Note that psr.ic is NOT turned on by this macro. This is so that
* we can pass interruption state as arguments to a handler.
*/
#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \
#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND) \
mov r16=IA64_KR(CURRENT); /* M */ \
mov r27=ar.rsc; /* M */ \
mov r20=r1; /* A */ \
@ -87,6 +90,7 @@
tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \
mov r29=b0 \
;; \
WORKAROUND; \
adds r16=PT(R8),r1; /* initialize first base pointer */ \
adds r17=PT(R9),r1; /* initialize second base pointer */ \
(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \
@ -206,6 +210,40 @@
st8 [r25]=r10; /* ar.ssd */ \
;;
#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs,)
#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, )
#define RSE_WORKAROUND \
(pUStk) extr.u r17=r18,3,6; \
(pUStk) sub r16=r18,r22; \
[1:](pKStk) br.cond.sptk.many 1f; \
.xdata4 ".data.patch.rse",1b-. \
;; \
cmp.ge p6,p7 = 33,r17; \
;; \
(p6) mov r17=0x310; \
(p7) mov r17=0x308; \
;; \
cmp.leu p1,p0=r16,r17; \
(p1) br.cond.sptk.many 1f; \
dep.z r17=r26,0,62; \
movl r16=2f; \
;; \
mov ar.pfs=r17; \
dep r27=r0,r27,16,14; \
mov b0=r16; \
;; \
br.ret.sptk b0; \
;; \
2: \
mov ar.rsc=r0 \
;; \
flushrs; \
;; \
mov ar.bspstore=r22 \
;; \
mov r18=ar.bsp; \
;; \
1: \
.pred.rel "mutex", pKStk, pUStk
#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, , )

View file

@ -115,6 +115,29 @@ ia64_patch_vtop (unsigned long start, unsigned long end)
ia64_srlz_i();
}
/*
* Disable the RSE workaround by turning the conditional branch
* that we tagged in each place the workaround was used into an
* unconditional branch.
*/
void __init
ia64_patch_rse (unsigned long start, unsigned long end)
{
s32 *offp = (s32 *) start;
u64 ip, *b;
while (offp < (s32 *) end) {
ip = (u64) offp + *offp;
b = (u64 *)(ip & -16);
b[1] &= ~0xf800000L;
ia64_fc((void *) ip);
++offp;
}
ia64_sync_i();
ia64_srlz_i();
}
void __init
ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
{

View file

@ -560,6 +560,17 @@ setup_arch (char **cmdline_p)
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
#ifdef CONFIG_ITANIUM
ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
#else
{
u64 num_phys_stacked;
if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
}
#endif
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif

View file

@ -156,6 +156,13 @@ SECTIONS
__end___vtop_patchlist = .;
}
.data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
{
__start___rse_patchlist = .;
*(.data.patch.rse)
__end___rse_patchlist = .;
}
.data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
{
__start___mckinley_e9_bundles = .;

View file

@ -159,7 +159,8 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest,
if (p->u.ioreq.state == STATE_IORESP_READY) {
if (dir == IOREQ_READ)
*dest = p->u.ioreq.data;
/* it's necessary to ensure zero extending */
*dest = p->u.ioreq.data & (~0UL >> (64-(s*8)));
} else
panic_vm(vcpu);
out:

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:41 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:42 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:43 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:45 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:46 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:47 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:42:31 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:49 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:50 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:51 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:53 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc2
# Sun May 18 14:44:54 2008
# Linux kernel version: 2.6.26-rc4
# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y

View file

@ -111,7 +111,13 @@ void hw_timer_init(void)
__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
mcftmr_cycles_per_jiffy = FREQ / HZ;
__raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
/*
* The coldfire timer runs from 0 to TRR included, then 0
* again and so on. It counts thus actually TRR + 1 steps
* for 1 tick, not TRR. So if you want n cycles,
* initialize TRR with n - 1.
*/
__raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));

View file

@ -45,6 +45,7 @@ unsigned int get_au1x00_speed(void)
{
return au1x00_clock;
}
EXPORT_SYMBOL(get_au1x00_speed);
/*
* The UART baud base is not known at compile time ... if

View file

@ -216,6 +216,17 @@ u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
void au1xxx_ddma_del_device(u32 devid)
{
dbdev_tab_t *p = find_dbdev_id(devid);
if (p != NULL) {
memset(p, 0, sizeof(dbdev_tab_t));
p->dev_id = ~0;
}
}
EXPORT_SYMBOL(au1xxx_ddma_del_device);
/* Allocate a channel and return a non-zero descriptor if successful. */
u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)

View file

@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o

View file

@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29)
#ifdef CONFIG_KALLSYMS
printk("\n");
#endif
#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
if (IS_KVA01(sp)) {
while (!kstack_end(sp)) {
addr = *sp++;
if (__kernel_text_address(addr))
print_ip_sym(addr);
while (!kstack_end(sp)) {
unsigned long __user *p =
(unsigned long __user *)(unsigned long)sp++;
if (__get_user(addr, p)) {
printk(" (Bad stack address)");
break;
}
printk("\n");
if (__kernel_text_address(addr))
print_ip_sym(addr);
}
printk("\n");
}
#ifdef CONFIG_KALLSYMS

View file

@ -58,27 +58,8 @@ static int mips_cpu_timer_irq;
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
DEFINE_PER_CPU(unsigned int, tickcount);
#define tickcount_this_cpu __get_cpu_var(tickcount)
static unsigned long ledbitmask;
static void mips_timer_dispatch(void)
{
#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
/*
* Yes, this is very tacky, won't work as expected with SMTC and
* dyntick will break it,
* but it gives me a nice warm feeling during debug
*/
#define LEDBAR 0xbf000408
if (tickcount_this_cpu++ >= HZ) {
tickcount_this_cpu = 0;
change_bit(smp_processor_id(), &ledbitmask);
smp_wmb(); /* Make sure every one else sees the change */
/* This will pick up any recent changes made by other CPU's */
*(unsigned int *)LEDBAR = ledbitmask;
}
#endif
do_IRQ(mips_cpu_timer_irq);
}

View file

@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void)
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
off = min(8, pref_bias_clear_store / cache_line_size) *
cache_line_size;
off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
* cache_line_size : 0;
while (off) {
build_clear_pref(&buf, -off);
off -= cache_line_size;
@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void)
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
cache_line_size : 0;
while (off) {
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
off -= cache_line_size;

View file

@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata;
static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
/* Found by experiment: R4600 v2.0 needs this, too. */
/* Found by experiment: R4600 v2.0/R4700 needs this, too. */
case CPU_R4600:
case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:

View file

@ -13,6 +13,22 @@
#include <asm/sn/intr.h>
#include <asm/sn/sn0/hub.h>
/*
* Most of the IOC3 PCI config register aren't present
* we emulate what is needed for a normal PCI enumeration
*/
static u32 emulate_ioc3_cfg(int where, int size)
{
if (size == 1 && where == 0x3d)
return 0x01;
else if (size == 2 && where == 0x3c)
return 0x0100;
else if (size == 4 && where == 0x3c)
return 0x00000100;
return 0;
}
/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
@ -64,7 +80,7 @@ oh_my_gawd:
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
*value = 0;
*value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
@ -127,7 +143,7 @@ oh_my_gawd:
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
*value = 0;
*value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}

View file

@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
static int num_bridges = 0;
bridge_t *bridge;
int slot;
extern int pci_probe_only;
pci_probe_only = 1;
printk("a bridge\n");
@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
#ifdef CONFIG_PAGE_SIZE_4KB
bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
#else /* 16kB or larger */
bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
#endif
/*
* Hmm... IRIX sets additional bits in the address which

View file

@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void)
return NASID_TO_COMPACT_NODEID(get_nasid());
}
/* Extracted from the IOC3 meta driver. FIXME. */
static inline void ioc3_sio_init(void)
{
struct ioc3 *ioc3;
nasid_t nid;
long loops;
nid = get_nasid();
ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
ioc3->sscr_a = 0; /* PIO mode for uarta. */
ioc3->sscr_b = 0; /* PIO mode for uartb. */
ioc3->sio_iec = ~0;
ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
loops=1000000; while(loops--);
ioc3->sregs.uarta.iu_fcr = 0;
ioc3->sregs.uartb.iu_fcr = 0;
loops=1000000; while(loops--);
}
static inline void ioc3_eth_init(void)
{
struct ioc3 *ioc3;
@ -234,7 +213,6 @@ void __init plat_mem_setup(void)
panic("Kernel compiled for N mode.");
#endif
ioc3_sio_init();
ioc3_eth_init();
per_cpu_init();

View file

@ -33,10 +33,6 @@
#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT)
#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT)
#define SLOT_IGNORED 0xffff
static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
struct node_data *__node_data[MAX_COMPACT_NODES];
@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot)
return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
}
/*
* Return the number of pages of memory provided by the given slot
* on the specified node.
*/
static pfn_t __init slot_getsize(cnodeid_t node, int slot)
{
return (pfn_t) slot_psize_cache[node][slot];
}
/*
* Return highest slot filled
*/
static int __init node_getlastslot(cnodeid_t node)
{
return (int) slot_lastfilled_cache[node];
}
/*
* Return the pfn of the last free page of memory on a node.
*/
static pfn_t __init node_getmaxclick(cnodeid_t node)
{
pfn_t slot_psize;
int slot;
/*
* Start at the top slot. When we find a slot with memory in it,
* that's the winner.
*/
for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
if ((slot_psize = slot_getsize(node, slot))) {
if (slot_psize == SLOT_IGNORED)
continue;
/* Return the basepfn + the slot size, minus 1. */
return slot_getbasepfn(node, slot) + slot_psize - 1;
}
}
/*
* If there's no memory on the node, return 0. This is likely
* to cause problems.
*/
return 0;
}
static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
{
nasid_t nasid;
@ -404,13 +355,13 @@ static void __init mlreset(void)
static void __init szmem(void)
{
pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */
int slot, ignore;
int slot;
cnodeid_t node;
num_physpages = 0;
for_each_online_node(node) {
ignore = nodebytes = 0;
nodebytes = 0;
for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
slot_psize = slot_psize_compute(node, slot);
if (slot == 0)
@ -420,21 +371,20 @@ static void __init szmem(void)
* kernel text.
*/
nodebytes += (1LL << SLOT_SHIFT);
if (!slot_psize)
continue;
if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
(slot0sz << PAGE_SHIFT))
ignore = 1;
if (ignore && slot_psize) {
(slot0sz << PAGE_SHIFT)) {
printk("Ignoring slot %d onwards on node %d\n",
slot, node);
slot_psize_cache[node][slot] = SLOT_IGNORED;
slot = MAX_MEM_SLOTS;
continue;
}
num_physpages += slot_psize;
slot_psize_cache[node][slot] =
(unsigned short) slot_psize;
if (slot_psize)
slot_lastfilled_cache[node] = slot;
add_active_range(node, slot_getbasepfn(node, slot),
slot_getbasepfn(node, slot) + slot_psize);
}
}
}
@ -442,18 +392,20 @@ static void __init szmem(void)
static void __init node_mem_init(cnodeid_t node)
{
pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
pfn_t slot_freepfn = node_getfirstfree(node);
struct pglist_data *pd;
unsigned long bootmap_size;
pfn_t start_pfn, end_pfn;
get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
/*
* Allocate the node data structures on the node first.
*/
__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
pd = NODE_DATA(node);
pd->bdata = &plat_node_bdata[node];
NODE_DATA(node)->bdata = &plat_node_bdata[node];
NODE_DATA(node)->node_start_pfn = start_pfn;
NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
cpus_clear(hub_data(node)->h_cpus);
@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node)
sizeof(struct hub_data));
bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
slot_firstpfn, slot_lastpfn);
free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
(slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
start_pfn, end_pfn);
free_bootmem_with_active_regions(node, end_pfn);
reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
BOOTMEM_DEFAULT);
sparse_memory_present_with_active_regions(node);
}
/*
@ -515,16 +467,15 @@ void __init paging_init(void)
pagetable_init();
for_each_online_node(node) {
pfn_t start_pfn = slot_getbasepfn(node, 0);
pfn_t end_pfn = node_getmaxclick(node) + 1;
pfn_t start_pfn, end_pfn;
zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
free_area_init_node(node, NODE_DATA(node),
zones_size, start_pfn, NULL);
get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
}
zones_size[ZONE_NORMAL] = max_low_pfn;
free_area_init_nodes(zones_size);
}
void __init mem_init(void)
@ -535,34 +486,10 @@ void __init mem_init(void)
high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
for_each_online_node(node) {
unsigned slot, numslots;
struct page *end, *p;
/*
* This will free up the bootmem, ie, slot 0 memory.
*/
totalram_pages += free_all_bootmem_node(NODE_DATA(node));
/*
* We need to manually do the other slots.
*/
numslots = node_getlastslot(node);
for (slot = 1; slot <= numslots; slot++) {
p = nid_page_nr(node, slot_getbasepfn(node, slot) -
slot_getbasepfn(node, 0));
/*
* Free valid memory in current slot.
*/
for (end = p + slot_getsize(node, slot); p < end; p++) {
/* if (!page_is_ram(pgnr)) continue; */
/* commented out until page_is_ram works */
ClearPageReserved(p);
init_page_count(p);
__free_page(p);
totalram_pages++;
}
}
}
totalram_pages -= setup_zero_pages(); /* This comes from node 0 */

View file

@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
static void __cpuinit ip27_init_secondary(void)
{
per_cpu_init();
local_irq_enable();
}
static void __cpuinit ip27_smp_finish(void)
{
extern void hub_rt_clock_event_init(void);
hub_rt_clock_event_init();
local_irq_enable();
}
static void __init ip27_cpus_done(void)

View file

@ -160,10 +160,13 @@ static void rt_set_mode(enum clock_event_mode mode,
int rt_timer_irq;
static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
static DEFINE_PER_CPU(char [11], hub_rt_name);
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
struct clock_event_device *cd = dev_id;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
int slice = cputoslice(cpu);
/*
@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = {
#define NSEC_PER_CYCLE 800
#define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE)
static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
static DEFINE_PER_CPU(char [11], hub_rt_name);
static void __cpuinit hub_rt_clock_event_init(void)
void __cpuinit hub_rt_clock_event_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
@ -203,17 +203,16 @@ static void __cpuinit hub_rt_clock_event_init(void)
int irq = rt_timer_irq;
sprintf(name, "hub-rt %d", cpu);
cd->name = "HUB-RT",
cd->features = CLOCK_EVT_FEAT_ONESHOT,
cd->name = name;
cd->features = CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, CYCLES_PER_SEC);
cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
cd->rating = 200,
cd->irq = irq,
cd->cpumask = cpumask_of_cpu(cpu),
cd->rating = 300,
cd->set_next_event = rt_next_event,
cd->set_mode = rt_set_mode,
cd->rating = 200;
cd->irq = irq;
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = rt_next_event;
cd->set_mode = rt_set_mode;
clockevents_register_device(cd);
}
@ -261,6 +260,7 @@ void __init plat_time_init(void)
{
hub_rt_clocksource_init();
hub_rt_clock_event_global_init();
hub_rt_clock_event_init();
}
void __cpuinit cpu_time_init(void)
@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void)
printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
hub_rt_clock_event_init();
set_c0_status(SRB_TIMOCLK);
}

View file

@ -13,10 +13,9 @@
#include <asm/unistd.h>
#include <asm/errno.h>
#include <linux/linkage.h>
#include <linux/init.h>
.level LEVEL
__HEAD
.text
.import hpux_call_table
.import hpux_syscall_exit,code

View file

@ -28,10 +28,9 @@
#include <asm/assembly.h>
#include <asm/signal.h>
#include <linux/linkage.h>
#include <linux/init.h>
.level LEVEL
__HEAD
.text
/* These should probably go in a header file somewhere.
* They are duplicated in kernel/wrappers.S

View file

@ -38,7 +38,6 @@
#include <asm/thread_info.h>
#include <linux/linkage.h>
#include <linux/init.h>
#ifdef CONFIG_64BIT
.level 2.0w
@ -622,7 +621,7 @@
* the static part of the kernel address space.
*/
__HEAD
.text
.align PAGE_SIZE

View file

@ -33,6 +33,7 @@ ENTRY(boot_args)
END(boot_args)
__HEAD
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */

View file

@ -47,7 +47,6 @@
#include <asm/pdc.h>
#include <linux/linkage.h>
#include <linux/init.h>
/*
* stack for os_hpmc, the HPMC handler.
@ -77,7 +76,7 @@ ENTRY(hpmc_pim_data)
.block HPMC_PIM_DATA_SIZE
END(hpmc_pim_data)
__HEAD
.text
.import intr_save, code
ENTRY(os_hpmc)

View file

@ -37,9 +37,8 @@
#include <asm/pgtable.h>
#include <asm/cache.h>
#include <linux/linkage.h>
#include <linux/init.h>
__HEAD
.text
.align 128
ENTRY(flush_tlb_all_local)

Some files were not shown because too many files have changed in this diff Show more