redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

usb: gadget: autoconf: net2280: match hardware and usb ep address

Browse source 
USB3380 GPEP can be used in IN and OUT directions however, both
directions should use same endpoint address. Fulfil this requirement
by mapping usb endpoint to hardware endpoint with the same address.

Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Mian Yousaf Kaukab 2015-05-16 22:33:37 +02:00 committed by Felipe Balbi
parent c65c4f052b
commit e9ab4d0ab8
1 changed files with 18 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
drivers/usb/gadget/epautoconf.c
View file

@ -258,15 +258,25 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
ep = find_ep (gadget, "ep-e");
if (ep && ep_matches(gadget, ep, desc, ep_comp))
goto found_ep;
ep = find_ep (gadget, "ep-f");
if (ep && ep_matches(gadget, ep, desc, ep_comp))
goto found_ep;
if (gadget_is_net2280(gadget)) {
char name[8];
if (type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
ep = find_ep(gadget, "ep-e");
if (ep && ep_matches(gadget, ep, desc, ep_comp))
goto found_ep;
ep = find_ep(gadget, "ep-f");
if (ep && ep_matches(gadget, ep, desc, ep_comp))
goto found_ep;
}
/* USB3380: use same address for usb and hardware endpoints */
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
ep = find_ep(gadget, name);
if (ep && ep_matches(gadget, ep, desc, ep_comp))
goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */