redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: rockchip: use pin constants to describe gpios

Browse source 
Use macros to describe gpios will make the dts easier to
read and write.

All the modifications done with sed:

sed -i -e 's/ 0  GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 1  GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 2  GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
.......
.......
sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*
sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk*

Tested with:

for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i);  done

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[also adapted the gpio interrupts]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Andy Yan 2016-10-22 20:54:55 +08:00 committed by Heiko Stuebner
parent 0af13f7063
commit e9e79d5395
34 changed files with 160 additions and 160 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/arm/boot/dts/rk3036-evb.dts
View file

@ -56,7 +56,7 @@
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>; pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>; phy = <&phy0>;
phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */ phy-reset-duration = <10>; /* millisecond */
status = "okay"; status = "okay";

12
arch/arm/boot/dts/rk3036-kylin.dts
View file

@ -55,7 +55,7 @@
compatible = "gpio-leds"; compatible = "gpio-leds";
work { work {
gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
label = "kylin:red:led"; label = "kylin:red:led";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&led_ctl>; pinctrl-0 = <&led_ctl>;
@ -74,9 +74,9 @@
* - SDIO_RESET_L_WL_RST * - SDIO_RESET_L_WL_RST
* - SDIO_RESET_L_BT_EN * - SDIO_RESET_L_BT_EN
*/ */
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
<&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
<&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
}; };
sound { sound {
@ -121,7 +121,7 @@
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>; pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>; phy = <&phy0>;
phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */ phy-reset-duration = <10>; /* millisecond */
status = "okay"; status = "okay";
@ -148,7 +148,7 @@
compatible = "rockchip,rk808"; compatible = "rockchip,rk808";
reg = <0x1b>; reg = <0x1b>;
interrupt-parent = <&gpio2>; interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>; pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller; rockchip,system-power-controller;

8
arch/arm/boot/dts/rk3066a-bqcurie2.dts
View file

@ -71,7 +71,7 @@
regulator-name = "sdmmc-supply"; regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>; regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>; regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>; startup-delay-us = <100000>;
vin-supply = <&vcc_io>; vin-supply = <&vcc_io>;
}; };
@ -81,7 +81,7 @@
autorepeat; autorepeat;
power { power {
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
label = "GPIO Key Power"; label = "GPIO Key Power";
linux,input-type = <1>; linux,input-type = <1>;
@ -89,7 +89,7 @@
debounce-interval = <100>; debounce-interval = <100>;
}; };
volume-down { volume-down {
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>; linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-"; label = "GPIO Key Vol-";
linux,input-type = <1>; linux,input-type = <1>;
@ -111,7 +111,7 @@
reg = <0x2d>; reg = <0x2d>;
interrupt-parent = <&gpio6>; interrupt-parent = <&gpio6>;
interrupts = <6 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
vcc5-supply = <&vcc_io>; vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>; vcc6-supply = <&vcc_io>;

6
arch/arm/boot/dts/rk3066a-marsboard.dts
View file

@ -69,7 +69,7 @@
regulator-name = "sdmmc-supply"; regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>; regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>; regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>; startup-delay-us = <100000>;
vin-supply = <&vcc_io>; vin-supply = <&vcc_io>;
}; };
@ -91,7 +91,7 @@
reg = <0x2d>; reg = <0x2d>;
interrupt-parent = <&gpio6>; interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
vcc1-supply = <&vsys>; vcc1-supply = <&vsys>;
vcc2-supply = <&vsys>; vcc2-supply = <&vsys>;
@ -186,7 +186,7 @@
phy0: ethernet-phy@0 { phy0: ethernet-phy@0 {
reg = <0>; reg = <0>;
interrupt-parent = <&gpio1>; interrupt-parent = <&gpio1>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
}; };
}; };

10
arch/arm/boot/dts/rk3066a-mk808.dts
View file

@ -61,7 +61,7 @@
blue { blue {
label = "mk808:blue:power"; label = "mk808:blue:power";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
default-state = "off"; default-state = "off";
linux,default-trigger = "default-on"; linux,default-trigger = "default-on";
}; };
@ -77,7 +77,7 @@
vcc_host: usb-host-regulator { vcc_host: usb-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&host_drv>; pinctrl-0 = <&host_drv>;
pinctrl-names = "default"; pinctrl-names = "default";
regulator-always-on; regulator-always-on;
@ -91,7 +91,7 @@
vcc_otg: usb-otg-regulator { vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&otg_drv>; pinctrl-0 = <&otg_drv>;
pinctrl-names = "default"; pinctrl-names = "default";
regulator-always-on; regulator-always-on;
@ -104,7 +104,7 @@
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
pinctrl-names = "default"; pinctrl-names = "default";
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -117,7 +117,7 @@
vcc_wifi: sdio-regulator { vcc_wifi: sdio-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wifi_pwr>; pinctrl-0 = <&wifi_pwr>;
pinctrl-names = "default"; pinctrl-names = "default";
regulator-name = "vcc_wifi"; regulator-name = "vcc_wifi";

18
arch/arm/boot/dts/rk3066a-rayeager.dts
View file

@ -55,7 +55,7 @@
ir: ir-receiver { ir: ir-receiver {
compatible = "gpio-ir-receiver"; compatible = "gpio-ir-receiver";
gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ir_int>; pinctrl-0 = <&ir_int>;
}; };
@ -65,7 +65,7 @@
power { power {
wakeup-source; wakeup-source;
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power"; label = "GPIO Power";
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
pinctrl-names = "default"; pinctrl-names = "default";
@ -115,7 +115,7 @@
vcc_sata: sata-regulator { vcc_sata: sata-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sata_pwr>; pinctrl-0 = <&sata_pwr>;
regulator-name = "usb_5v"; regulator-name = "usb_5v";
@ -127,7 +127,7 @@
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -140,7 +140,7 @@
vcc_host: usb-host-regulator { vcc_host: usb-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_drv>; pinctrl-0 = <&host_drv>;
regulator-name = "host-pwr"; regulator-name = "host-pwr";
@ -153,7 +153,7 @@
vcc_otg: usb-otg-regulator { vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&otg_drv>; pinctrl-0 = <&otg_drv>;
regulator-name = "vcc_otg"; regulator-name = "vcc_otg";
@ -201,7 +201,7 @@
compatible = "asahi-kasei,ak8975"; compatible = "asahi-kasei,ak8975";
reg = <0x0d>; reg = <0x0d>;
interrupt-parent = <&gpio4>; interrupt-parent = <&gpio4>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>; interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&comp_int>; pinctrl-0 = <&comp_int>;
}; };
@ -210,7 +210,7 @@
compatible = "fsl,mma8452"; compatible = "fsl,mma8452";
reg = <0x1d>; reg = <0x1d>;
interrupt-parent = <&gpio4>; interrupt-parent = <&gpio4>;
interrupts = <16 IRQ_TYPE_EDGE_RISING>; interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>; pinctrl-0 = <&gsensor_int>;
}; };
@ -223,7 +223,7 @@
tps: tps@2d { tps: tps@2d {
reg = <0x2d>; reg = <0x2d>;
interrupt-parent = <&gpio6>; interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_EDGE_RISING>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&pwr_hold>; pinctrl-0 = <&pmic_int>, <&pwr_hold>;

10
arch/arm/boot/dts/rk3188-px3-evb.dts
View file

@ -62,7 +62,7 @@
autorepeat; autorepeat;
power { power {
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
label = "GPIO Key Power"; label = "GPIO Key Power";
linux,input-type = <1>; linux,input-type = <1>;
@ -102,7 +102,7 @@
compatible = "bosch,bma250"; compatible = "bosch,bma250";
reg = <0x18>; reg = <0x18>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
}; };
}; };
@ -114,7 +114,7 @@
compatible = "rockchip,rk818"; compatible = "rockchip,rk818";
reg = <0x1c>; reg = <0x1c>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller; rockchip,system-power-controller;
wakeup-source; wakeup-source;
#clock-cells = <1>; #clock-cells = <1>;
@ -247,8 +247,8 @@
compatible = "silead,gsl1680"; compatible = "silead,gsl1680";
reg = <0x40>; reg = <0x40>;
interrupt-parent = <&gpio1>; interrupt-parent = <&gpio1>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>; touchscreen-size-x = <800>;
touchscreen-size-y = <1280>; touchscreen-size-y = <1280>;
silead,max-fingers = <5>; silead,max-fingers = <5>;

20
arch/arm/boot/dts/rk3188-radxarock.dts
View file

@ -58,7 +58,7 @@
autorepeat; autorepeat;
power { power {
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
label = "GPIO Key Power"; label = "GPIO Key Power";
linux,input-type = <1>; linux,input-type = <1>;
@ -72,19 +72,19 @@
green { green {
label = "rock:green:user1"; label = "rock:green:user1";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off"; default-state = "off";
}; };
blue { blue {
label = "rock:blue:user2"; label = "rock:blue:user2";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off"; default-state = "off";
}; };
sleep { sleep {
label = "rock:red:power"; label = "rock:red:power";
gpios = <&gpio0 15 0>; gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off"; default-state = "off";
}; };
}; };
@ -106,7 +106,7 @@
ir_recv: gpio-ir-receiver { ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver"; compatible = "gpio-ir-receiver";
gpios = <&gpio0 10 1>; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ir_recv_pin>; pinctrl-0 = <&ir_recv_pin>;
}; };
@ -114,7 +114,7 @@
vcc_otg: usb-otg-regulator { vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>; pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus"; regulator-name = "otg-vbus";
@ -129,7 +129,7 @@
regulator-name = "sdmmc-supply"; regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>; startup-delay-us = <100000>;
vin-supply = <&vcc_io>; vin-supply = <&vcc_io>;
}; };
@ -137,7 +137,7 @@
vcc_host: usb-host-regulator { vcc_host: usb-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr"; regulator-name = "host-pwr";
@ -168,7 +168,7 @@
phy0: ethernet-phy@0 { phy0: ethernet-phy@0 {
reg = <0>; reg = <0>;
interrupt-parent = <&gpio3>; interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
}; };
}; };
@ -184,7 +184,7 @@
compatible = "haoyu,hym8563"; compatible = "haoyu,hym8563";
reg = <0x51>; reg = <0x51>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&rtc_int>; pinctrl-0 = <&rtc_int>;
#clock-cells = <0>; #clock-cells = <0>;

2
arch/arm/boot/dts/rk3229-evb.dts
View file

@ -77,7 +77,7 @@
phy-mode = "rgmii"; phy-mode = "rgmii";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>; pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>; tx_delay = <0x30>;

6
arch/arm/boot/dts/rk3288-evb-act8846.dts
View file

@ -47,7 +47,7 @@
vcc_lcd: vcc-lcd { vcc_lcd: vcc-lcd {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcd_en>; pinctrl-0 = <&lcd_en>;
regulator-name = "vcc_lcd"; regulator-name = "vcc_lcd";
@ -57,7 +57,7 @@
vcc_wl: vcc-wl { vcc_wl: vcc-wl {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&wifi_pwr>; pinctrl-0 = <&wifi_pwr>;
regulator-name = "vcc_wl"; regulator-name = "vcc_wl";
@ -96,7 +96,7 @@
reg = <0x51>; reg = <0x51>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int>; pinctrl-0 = <&pmic_int>;

2
arch/arm/boot/dts/rk3288-evb-rk808.dts
View file

@ -52,7 +52,7 @@
compatible = "rockchip,rk808"; compatible = "rockchip,rk808";
reg = <0x1b>; reg = <0x1b>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>; pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller; rockchip,system-power-controller;

14
arch/arm/boot/dts/rk3288-evb.dtsi
View file

@ -84,7 +84,7 @@
240 241 242 243 244 245 246 247 240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>; 248 249 250 251 252 253 254 255>;
default-brightness-level = <128>; default-brightness-level = <128>;
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&bl_en>; pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
@ -100,7 +100,7 @@
panel: panel { panel: panel {
compatible ="lg,lp079qx1-sp0v", "simple-panel"; compatible ="lg,lp079qx1-sp0v", "simple-panel";
backlight = <&backlight>; backlight = <&backlight>;
enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_cs>; pinctrl-0 = <&lcd_cs>;
ports { ports {
@ -120,7 +120,7 @@
pinctrl-0 = <&pwrbtn>; pinctrl-0 = <&pwrbtn>;
power { power {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
label = "GPIO Key Power"; label = "GPIO Key Power";
linux,input-type = <1>; linux,input-type = <1>;
@ -133,7 +133,7 @@
vcc_host: vcc-host-regulator { vcc_host: vcc-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host"; regulator-name = "vcc_host";
@ -144,7 +144,7 @@
vcc_phy: vcc-phy-regulator { vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&eth_phy_pwr>; pinctrl-0 = <&eth_phy_pwr>;
regulator-name = "vcc_phy"; regulator-name = "vcc_phy";
@ -170,7 +170,7 @@
*/ */
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -236,7 +236,7 @@
phy-supply = <&vcc_phy>; phy-supply = <&vcc_phy>;
phy-mode = "rgmii"; phy-mode = "rgmii";
clock_in_out = "input"; clock_in_out = "input";
snps,reset-gpio = <&gpio4 7 0>; snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>; assigned-clocks = <&cru SCLK_MAC>;

6
arch/arm/boot/dts/rk3288-fennec.dts
View file

@ -93,7 +93,7 @@
phy-mode = "rgmii"; phy-mode = "rgmii";
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>; tx_delay = <0x30>;
rx_delay = <0x10>; rx_delay = <0x10>;
status = "okay"; status = "okay";
@ -111,7 +111,7 @@
compatible = "rockchip,rk808"; compatible = "rockchip,rk808";
reg = <0x1b>; reg = <0x1b>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>; #clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2"; clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default"; pinctrl-names = "default";
@ -345,7 +345,7 @@
&usbphy { &usbphy {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_drv>; pinctrl-0 = <&host_drv>;
vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };

2
arch/arm/boot/dts/rk3288-firefly-beta.dts
View file

@ -49,7 +49,7 @@
}; };
&ir { &ir {
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
}; };
&pinctrl { &pinctrl {

2
arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
View file

@ -96,7 +96,7 @@
phy-mode = "rgmii"; phy-mode = "rgmii";
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>; tx_delay = <0x30>;
rx_delay = <0x10>; rx_delay = <0x10>;
status = "ok"; status = "ok";

26
arch/arm/boot/dts/rk3288-firefly-reload.dts
View file

@ -53,7 +53,7 @@
power { power {
wakeup-source; wakeup-source;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power"; label = "GPIO Power";
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
pinctrl-names = "default"; pinctrl-names = "default";
@ -63,14 +63,14 @@
ir-receiver { ir-receiver {
compatible = "gpio-ir-receiver"; compatible = "gpio-ir-receiver";
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
}; };
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
power { power {
gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:blue:power"; label = "firefly:blue:power";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&power_led>; pinctrl-0 = <&power_led>;
@ -78,7 +78,7 @@
}; };
work { work {
gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user"; label = "firefly:blue:user";
linux,default-trigger = "rc-feedback"; linux,default-trigger = "rc-feedback";
pinctrl-names = "default"; pinctrl-names = "default";
@ -92,7 +92,7 @@
clock-names = "ext_clock"; clock-names = "ext_clock";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>; pinctrl-0 = <&wifi_enable>;
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
}; };
sound { sound {
@ -112,7 +112,7 @@
vcc_host_5v: usb-host-regulator { vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v"; regulator-name = "vcc_host_5v";
@ -133,7 +133,7 @@
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -146,7 +146,7 @@
vcc_otg_5v: usb-otg-regulator { vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>; pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v"; regulator-name = "vcc_otg_5v";
@ -159,7 +159,7 @@
dovdd_1v8: dovdd-1v8-regulator { dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>; pinctrl-0 = <&dvp_pwr>;
regulator-name = "dovdd_1v8"; regulator-name = "dovdd_1v8";
@ -171,7 +171,7 @@
vcc28_dvp: vcc28-dvp-regulator { vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>; pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp"; regulator-name = "vcc28_dvp";
@ -183,7 +183,7 @@
af_28: af_28-regulator { af_28: af_28-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>; pinctrl-0 = <&dvp_pwr>;
regulator-name = "af_28"; regulator-name = "af_28";
@ -195,7 +195,7 @@
dvdd_1v2: af_28-regulator { dvdd_1v2: af_28-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&cif_pwr>; pinctrl-0 = <&cif_pwr>;
regulator-name = "dvdd_1v2"; regulator-name = "dvdd_1v2";
@ -221,7 +221,7 @@
clock-frequency = <32768>; clock-frequency = <32768>;
clock-output-names = "xin32k"; clock-output-names = "xin32k";
interrupt-parent = <&gpio7>; interrupt-parent = <&gpio7>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&rtc_int>; pinctrl-0 = <&rtc_int>;
}; };

2
arch/arm/boot/dts/rk3288-firefly.dts
View file

@ -49,7 +49,7 @@
}; };
&ir { &ir {
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
}; };
&pinctrl { &pinctrl {

18
arch/arm/boot/dts/rk3288-firefly.dtsi
View file

@ -75,7 +75,7 @@
power { power {
wakeup-source; wakeup-source;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power"; label = "GPIO Power";
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
pinctrl-names = "default"; pinctrl-names = "default";
@ -87,7 +87,7 @@
compatible = "gpio-leds"; compatible = "gpio-leds";
work { work {
gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user"; label = "firefly:blue:user";
linux,default-trigger = "rc-feedback"; linux,default-trigger = "rc-feedback";
pinctrl-names = "default"; pinctrl-names = "default";
@ -95,7 +95,7 @@
}; };
power { power {
gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:green:power"; label = "firefly:green:power";
linux,default-trigger = "default-on"; linux,default-trigger = "default-on";
pinctrl-names = "default"; pinctrl-names = "default";
@ -114,7 +114,7 @@
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -145,7 +145,7 @@
vcc_host_5v: usb-host-regulator { vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v"; regulator-name = "vcc_host_5v";
@ -158,7 +158,7 @@
vcc_otg_5v: usb-otg-regulator { vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>; pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v"; regulator-name = "vcc_otg_5v";
@ -175,7 +175,7 @@
vcc28_dvp: vcc28-dvp-regulator { vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>; pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp"; regulator-name = "vcc28_dvp";
@ -213,7 +213,7 @@
phy-mode = "rgmii"; phy-mode = "rgmii";
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>; tx_delay = <0x30>;
rx_delay = <0x10>; rx_delay = <0x10>;
status = "ok"; status = "ok";
@ -260,7 +260,7 @@
clock-frequency = <32768>; clock-frequency = <32768>;
clock-output-names = "xin32k"; clock-output-names = "xin32k";
interrupt-parent = <&gpio7>; interrupt-parent = <&gpio7>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&rtc_int>; pinctrl-0 = <&rtc_int>;
}; };

8
arch/arm/boot/dts/rk3288-miqi.dts
View file

@ -68,7 +68,7 @@
compatible = "gpio-leds"; compatible = "gpio-leds";
work { work {
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>;
label = "miqi:green:user"; label = "miqi:green:user";
linux,default-trigger = "default-on"; linux,default-trigger = "default-on";
pinctrl-names = "default"; pinctrl-names = "default";
@ -87,7 +87,7 @@
vcc_host: usb-host-regulator { vcc_host: usb-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host"; regulator-name = "vcc_host";
@ -99,7 +99,7 @@
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -146,7 +146,7 @@
phy-mode = "rgmii"; phy-mode = "rgmii";
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>; tx_delay = <0x30>;
rx_delay = <0x10>; rx_delay = <0x10>;
status = "ok"; status = "ok";

8
arch/arm/boot/dts/rk3288-popmetal.dts
View file

@ -180,7 +180,7 @@
phy-supply = <&vcc_lan>; phy-supply = <&vcc_lan>;
phy-mode = "rgmii"; phy-mode = "rgmii";
clock_in_out = "input"; clock_in_out = "input";
snps,reset-gpio = <&gpio4 RK_PB0 0>; snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>; assigned-clocks = <&cru SCLK_MAC>;
@ -205,7 +205,7 @@
compatible = "rockchip,rk808"; compatible = "rockchip,rk808";
reg = <0x1b>; reg = <0x1b>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>; pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller; rockchip,system-power-controller;
@ -390,7 +390,7 @@
compatible = "asahi-kasei,ak8975"; compatible = "asahi-kasei,ak8975";
reg = <0x0d>; reg = <0x0d>;
interrupt-parent = <&gpio8>; interrupt-parent = <&gpio8>;
interrupts = <1 IRQ_TYPE_EDGE_RISING>; interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&comp_int>; pinctrl-0 = <&comp_int>;
vdd-supply = <&vcc_io>; vdd-supply = <&vcc_io>;
@ -409,7 +409,7 @@
compatible = "fsl,mma8452"; compatible = "fsl,mma8452";
reg = <0x1d>; reg = <0x1d>;
interrupt-parent = <&gpio8>; interrupt-parent = <&gpio8>;
interrupts = <0 IRQ_TYPE_EDGE_RISING>; interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>; pinctrl-0 = <&gsensor_int>;
}; };

14
arch/arm/boot/dts/rk3288-r89.dts
View file

@ -68,7 +68,7 @@
pinctrl-0 = <&pwrbtn>; pinctrl-0 = <&pwrbtn>;
power { power {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
label = "GPIO Key Power"; label = "GPIO Key Power";
linux,input-type = <1>; linux,input-type = <1>;
@ -79,7 +79,7 @@
ir: ir-receiver { ir: ir-receiver {
compatible = "gpio-ir-receiver"; compatible = "gpio-ir-receiver";
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ir_int>; pinctrl-0 = <&ir_int>;
}; };
@ -87,7 +87,7 @@
vcc_host: vcc-host-regulator { vcc_host: vcc-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host"; regulator-name = "vcc_host";
@ -98,7 +98,7 @@
vcc_otg: vcc-otg-regulator { vcc_otg: vcc-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>; pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg"; regulator-name = "vcc_otg";
@ -111,7 +111,7 @@
regulator-name = "sdmmc-supply"; regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>; startup-delay-us = <100000>;
vin-supply = <&vcc_io>; vin-supply = <&vcc_io>;
}; };
@ -134,7 +134,7 @@
phy-supply = <&vcc_lan>; phy-supply = <&vcc_lan>;
phy-mode = "rgmii"; phy-mode = "rgmii";
clock_in_out = "input"; clock_in_out = "input";
snps,reset-gpio = <&gpio4 7 0>; snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>; snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>; assigned-clocks = <&cru SCLK_MAC>;
@ -187,7 +187,7 @@
#clock-cells = <0>; #clock-cells = <0>;
clock-output-names = "xin32k"; clock-output-names = "xin32k";
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int>; pinctrl-0 = <&pmic_int>;
}; };

4
arch/arm/boot/dts/rk3288-rock2-som.dtsi
View file

@ -51,7 +51,7 @@
compatible = "mmc-pwrseq-emmc"; compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>; pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default"; pinctrl-names = "default";
reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
}; };
ext_gmac: external-gmac-clock { ext_gmac: external-gmac-clock {
@ -106,7 +106,7 @@
phy-supply = <&vccio_pmu>; phy-supply = <&vccio_pmu>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins &phy_rst>; pinctrl-0 = <&rgmii_pins &phy_rst>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>; snps,reset-delays-us = <0 10000 30000>;
rx_delay = <0x10>; rx_delay = <0x10>;

14
arch/arm/boot/dts/rk3288-rock2-square.dts
View file

@ -53,13 +53,13 @@
compatible = "gpio-leds"; compatible = "gpio-leds";
heartbeat { heartbeat {
gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
label = "rock2:green:state1"; label = "rock2:green:state1";
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
mmc { mmc {
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "rock2:blue:state2"; label = "rock2:blue:state2";
linux,default-trigger = "mmc0"; linux,default-trigger = "mmc0";
}; };
@ -67,7 +67,7 @@
ir: ir-receiver { ir: ir-receiver {
compatible = "gpio-ir-receiver"; compatible = "gpio-ir-receiver";
gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ir_int>; pinctrl-0 = <&ir_int>;
}; };
@ -92,13 +92,13 @@
clock-names = "ext_clock"; clock-names = "ext_clock";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>; pinctrl-0 = <&wifi_enable>;
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
}; };
vcc_usb_host: vcc-host-regulator { vcc_usb_host: vcc-host-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>; pinctrl-0 = <&host_vbus_drv>;
/* Always on as the rockchip usb phy doesn't have a vbus-supply /* Always on as the rockchip usb phy doesn't have a vbus-supply
@ -110,7 +110,7 @@
vcc_sd: sdmmc-regulator { vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>; pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd"; regulator-name = "vcc_sd";
@ -166,7 +166,7 @@
clock-frequency = <32768>; clock-frequency = <32768>;
clock-output-names = "xin32k"; clock-output-names = "xin32k";
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int>; pinctrl-0 = <&pmic_int>;

8
arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
View file

@ -17,8 +17,8 @@
rockchip,model = "VEYRON-I2S"; rockchip,model = "VEYRON-I2S";
rockchip,i2s-controller = <&i2s>; rockchip,i2s-controller = <&i2s>;
rockchip,audio-codec = <&max98090>; rockchip,audio-codec = <&max98090>;
rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
rockchip,headset-codec = <&headsetcodec>; rockchip,headset-codec = <&headsetcodec>;
}; };
}; };
@ -28,7 +28,7 @@
compatible = "maxim,max98090"; compatible = "maxim,max98090";
reg = <0x10>; reg = <0x10>;
interrupt-parent = <&gpio6>; interrupt-parent = <&gpio6>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
clock-names = "mclk"; clock-names = "mclk";
clocks = <&cru SCLK_I2S0_OUT>; clocks = <&cru SCLK_I2S0_OUT>;
pinctrl-names = "default"; pinctrl-names = "default";
@ -41,7 +41,7 @@
compatible = "ti,ts3a227e"; compatible = "ti,ts3a227e";
reg = <0x3b>; reg = <0x3b>;
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ts3a227e_int_l>; pinctrl-0 = <&ts3a227e_int_l>;
ti,micbias = <7>; /* MICBIAS = 2.8V */ ti,micbias = <7>; /* MICBIAS = 2.8V */

8
arch/arm/boot/dts/rk3288-veyron-brain.dts
View file

@ -67,7 +67,7 @@
vcc5_host2: vcc5-host2-regulator { vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>; pinctrl-0 = <&usb2_pwr_en>;
regulator-name = "vcc5_host2"; regulator-name = "vcc5_host2";
@ -103,8 +103,8 @@
&rk808 { &rk808 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>; <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply; /delete-property/ vcc6-supply;
@ -133,7 +133,7 @@
&vcc50_hdmi { &vcc50_hdmi {
enable-active-high; enable-active-high;
gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>; pinctrl-0 = <&vcc50_hdmi_en>;
}; };

14
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
View file

@ -91,7 +91,7 @@
240 241 242 243 244 245 246 247 240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>; 248 249 250 251 252 253 254 255>;
default-brightness-level = <128>; default-brightness-level = <128>;
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
backlight-boot-off; backlight-boot-off;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&bl_en>; pinctrl-0 = <&bl_en>;
@ -102,7 +102,7 @@
gpio-charger { gpio-charger {
compatible = "gpio-charger"; compatible = "gpio-charger";
charger-type = "mains"; charger-type = "mains";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ac_present_ap>; pinctrl-0 = <&ac_present_ap>;
}; };
@ -142,7 +142,7 @@
vcc5_host1: vcc5-host1-regulator { vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&host1_pwr_en>; pinctrl-0 = <&host1_pwr_en>;
regulator-name = "vcc5_host1"; regulator-name = "vcc5_host1";
@ -154,7 +154,7 @@
vcc5v_otg: vcc5v-otg-regulator { vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&usbotg_pwren_h>; pinctrl-0 = <&usbotg_pwren_h>;
regulator-name = "vcc5_host2"; regulator-name = "vcc5_host2";
@ -190,7 +190,7 @@
pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
lid { lid {
label = "Lid"; label = "Lid";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source; wakeup-source;
linux,code = <0>; /* SW_LID */ linux,code = <0>; /* SW_LID */
linux,input-type = <5>; /* EV_SW */ linux,input-type = <5>; /* EV_SW */
@ -228,7 +228,7 @@
reg = <0>; reg = <0>;
google,cros-ec-spi-pre-delay = <30>; google,cros-ec-spi-pre-delay = <30>;
interrupt-parent = <&gpio7>; interrupt-parent = <&gpio7>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ec_int>; pinctrl-0 = <&ec_int>;
spi-max-frequency = <3000000>; spi-max-frequency = <3000000>;
@ -247,7 +247,7 @@
compatible = "elan,ekth3000"; compatible = "elan,ekth3000";
reg = <0x15>; reg = <0x15>;
interrupt-parent = <&gpio7>; interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&trackpad_int>; pinctrl-0 = <&trackpad_int>;
vcc-supply = <&vcc33_io>; vcc-supply = <&vcc33_io>;

14
arch/arm/boot/dts/rk3288-veyron-jaq.dts
View file

@ -57,7 +57,7 @@
panel_regulator: panel-regulator { panel_regulator: panel-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>; pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator"; regulator-name = "panel_regulator";
@ -68,7 +68,7 @@
vcc18_lcd: vcc18-lcd { vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>; pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd"; regulator-name = "vcc18_lcd";
@ -80,7 +80,7 @@
backlight_regulator: backlight-regulator { backlight_regulator: backlight-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>; pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator"; regulator-name = "backlight_regulator";
@ -134,8 +134,8 @@
&rk808 { &rk808 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>; <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
regulators { regulators {
mic_vcc: LDO_REG2 { mic_vcc: LDO_REG2 {
@ -160,14 +160,14 @@
&vcc_5v { &vcc_5v {
enable-active-high; enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&drv_5v>; pinctrl-0 = <&drv_5v>;
}; };
&vcc50_hdmi { &vcc50_hdmi {
enable-active-high; enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>; pinctrl-0 = <&vcc50_hdmi_en>;
}; };

12
arch/arm/boot/dts/rk3288-veyron-jerry.dts
View file

@ -56,7 +56,7 @@
panel_regulator: panel-regulator { panel_regulator: panel-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>; pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator"; regulator-name = "panel_regulator";
@ -67,7 +67,7 @@
vcc18_lcd: vcc18-lcd { vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>; pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd"; regulator-name = "vcc18_lcd";
@ -79,7 +79,7 @@
backlight_regulator: backlight-regulator { backlight_regulator: backlight-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>; pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator"; regulator-name = "backlight_regulator";
@ -123,14 +123,14 @@
&vcc_5v { &vcc_5v {
enable-active-high; enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&drv_5v>; pinctrl-0 = <&drv_5v>;
}; };
&vcc50_hdmi { &vcc50_hdmi {
enable-active-high; enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>; pinctrl-0 = <&vcc50_hdmi_en>;
}; };
@ -197,7 +197,7 @@
trackpad@2c { trackpad@2c {
compatible = "hid-over-i2c"; compatible = "hid-over-i2c";
interrupt-parent = <&gpio7>; interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
reg = <0x2c>; reg = <0x2c>;
hid-descr-addr = <0x0020>; hid-descr-addr = <0x0020>;
vcc-supply = <&vcc33_io>; vcc-supply = <&vcc33_io>;

6
arch/arm/boot/dts/rk3288-veyron-mickey.dts
View file

@ -182,8 +182,8 @@
&rk808 { &rk808 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>; <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply; /delete-property/ vcc6-supply;
/delete-property/ vcc12-supply; /delete-property/ vcc12-supply;
@ -244,7 +244,7 @@
&vcc50_hdmi { &vcc50_hdmi {
enable-active-high; enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>; pinctrl-0 = <&power_hdmi_on>;
}; };

18
arch/arm/boot/dts/rk3288-veyron-minnie.dts
View file

@ -55,7 +55,7 @@
backlight_regulator: backlight-regulator { backlight_regulator: backlight-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>; pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator"; regulator-name = "backlight_regulator";
@ -66,7 +66,7 @@
panel_regulator: panel-regulator { panel_regulator: panel-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>; pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator"; regulator-name = "panel_regulator";
@ -77,7 +77,7 @@
vcc18_lcd: vcc18-lcd { vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>; pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd"; regulator-name = "vcc18_lcd";
@ -134,14 +134,14 @@
volum_down { volum_down {
label = "Volum_down"; label = "Volum_down";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>; linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>; debounce-interval = <100>;
}; };
volum_up { volum_up {
label = "Volum_up"; label = "Volum_up";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>; linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>; debounce-interval = <100>;
}; };
@ -165,10 +165,10 @@
compatible = "elan,ekth3500"; compatible = "elan,ekth3500";
reg = <0x10>; reg = <0x10>;
interrupt-parent = <&gpio2>; interrupt-parent = <&gpio2>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>; interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&touch_int &touch_rst>; pinctrl-0 = <&touch_int &touch_rst>;
reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
vcc33-supply = <&vcc33_touch>; vcc33-supply = <&vcc33_touch>;
vccio-supply = <&vcc33_touch>; vccio-supply = <&vcc33_touch>;
}; };
@ -211,14 +211,14 @@
&vcc_5v { &vcc_5v {
enable-active-high; enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&drv_5v>; pinctrl-0 = <&drv_5v>;
}; };
&vcc50_hdmi { &vcc50_hdmi {
enable-active-high; enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>; pinctrl-0 = <&vcc50_hdmi_en>;
}; };

4
arch/arm/boot/dts/rk3288-veyron-pinky.dts
View file

@ -76,7 +76,7 @@
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power { power {
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
}; };
}; };
@ -126,7 +126,7 @@
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_wp_gpio &sdmmc_bus4>; &sdmmc_wp_gpio &sdmmc_bus4>;
wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
}; };
&tsadc { &tsadc {

2
arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
View file

@ -115,7 +115,7 @@
cap-mmc-highspeed; cap-mmc-highspeed;
cap-sd-highspeed; cap-sd-highspeed;
card-detect-delay = <200>; card-detect-delay = <200>;
cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
rockchip,default-sample-phase = <90>; rockchip,default-sample-phase = <90>;
num-slots = <1>; num-slots = <1>;
sd-uhs-sdr12; sd-uhs-sdr12;

10
arch/arm/boot/dts/rk3288-veyron-speedy.dts
View file

@ -57,7 +57,7 @@
panel_regulator: panel-regulator { panel_regulator: panel-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>; pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator"; regulator-name = "panel_regulator";
@ -68,7 +68,7 @@
vcc18_lcd: vcc18-lcd { vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>; pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd"; regulator-name = "vcc18_lcd";
@ -80,7 +80,7 @@
backlight_regulator: backlight-regulator { backlight_regulator: backlight-regulator {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
enable-active-high; enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>; pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator"; regulator-name = "backlight_regulator";
@ -126,14 +126,14 @@
&vcc_5v { &vcc_5v {
enable-active-high; enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&drv_5v>; pinctrl-0 = <&drv_5v>;
}; };
&vcc50_hdmi { &vcc50_hdmi {
enable-active-high; enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>; pinctrl-0 = <&vcc50_hdmi_en>;
}; };

10
arch/arm/boot/dts/rk3288-veyron.dtsi
View file

@ -61,7 +61,7 @@
pinctrl-0 = <&pwr_key_l>; pinctrl-0 = <&pwr_key_l>;
power { power {
label = "Power"; label = "Power";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>; linux,code = <KEY_POWER>;
debounce-interval = <100>; debounce-interval = <100>;
wakeup-source; wakeup-source;
@ -70,7 +70,7 @@
gpio-restart { gpio-restart {
compatible = "gpio-restart"; compatible = "gpio-restart";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&ap_warm_reset_h>; pinctrl-0 = <&ap_warm_reset_h>;
priority = <200>; priority = <200>;
@ -80,7 +80,7 @@
compatible = "mmc-pwrseq-emmc"; compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>; pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default"; pinctrl-names = "default";
reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
}; };
sdio_pwrseq: sdio-pwrseq { sdio_pwrseq: sdio-pwrseq {
@ -96,7 +96,7 @@
* - SDIO_RESET_L_WL_REG_ON * - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low) * - PDN (power down when low)
*/ */
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
}; };
vcc_5v: vcc-5v { vcc_5v: vcc-5v {
@ -178,7 +178,7 @@
reg = <0x1b>; reg = <0x1b>;
clock-output-names = "xin32k", "wifibt_32kin"; clock-output-names = "xin32k", "wifibt_32kin";
interrupt-parent = <&gpio0>; interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>; pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller; rockchip,system-power-controller;