Merge commit 'v2.6.37-rc6' into for-2.6.38
This commit is contained in:
commit
ec66ee3797
83
Documentation/ABI/testing/sysfs-bus-rbd
Normal file
83
Documentation/ABI/testing/sysfs-bus-rbd
Normal file
|
@ -0,0 +1,83 @@
|
|||
What: /sys/bus/rbd/
|
||||
Date: November 2010
|
||||
Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
|
||||
Sage Weil <sage@newdream.net>
|
||||
Description:
|
||||
|
||||
Being used for adding and removing rbd block devices.
|
||||
|
||||
Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
|
||||
|
||||
$ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
|
||||
|
||||
The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
|
||||
will be assigned for any registered block device. If snapshot is used, it will
|
||||
be mapped read-only.
|
||||
|
||||
Removal of a device:
|
||||
|
||||
$ echo <dev-id> > /sys/bus/rbd/remove
|
||||
|
||||
Entries under /sys/bus/rbd/devices/<dev-id>/
|
||||
--------------------------------------------
|
||||
|
||||
client_id
|
||||
|
||||
The ceph unique client id that was assigned for this specific session.
|
||||
|
||||
major
|
||||
|
||||
The block device major number.
|
||||
|
||||
name
|
||||
|
||||
The name of the rbd image.
|
||||
|
||||
pool
|
||||
|
||||
The pool where this rbd image resides. The pool-name pair is unique
|
||||
per rados system.
|
||||
|
||||
size
|
||||
|
||||
The size (in bytes) of the mapped block device.
|
||||
|
||||
refresh
|
||||
|
||||
Writing to this file will reread the image header data and set
|
||||
all relevant datastructures accordingly.
|
||||
|
||||
current_snap
|
||||
|
||||
The current snapshot for which the device is mapped.
|
||||
|
||||
create_snap
|
||||
|
||||
Create a snapshot:
|
||||
|
||||
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
|
||||
|
||||
rollback_snap
|
||||
|
||||
Rolls back data to the specified snapshot. This goes over the entire
|
||||
list of rados blocks and sends a rollback command to each.
|
||||
|
||||
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
|
||||
|
||||
snap_*
|
||||
|
||||
A directory per each snapshot
|
||||
|
||||
|
||||
Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
|
||||
-------------------------------------------------------------
|
||||
|
||||
id
|
||||
|
||||
The rados internal snapshot id assigned for this snapshot
|
||||
|
||||
size
|
||||
|
||||
The size of the image when this snapshot was taken.
|
||||
|
||||
|
|
@ -47,6 +47,20 @@ Date: January 2007
|
|||
KernelVersion: 2.6.20
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Control the bluetooth device. 1 means on, 0 means off.
|
||||
Control the wlan device. 1 means on, 0 means off.
|
||||
This may control the led, the device or both.
|
||||
Users: Lapsus
|
||||
|
||||
What: /sys/devices/platform/asus_laptop/wimax
|
||||
Date: October 2010
|
||||
KernelVersion: 2.6.37
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Control the wimax device. 1 means on, 0 means off.
|
||||
|
||||
What: /sys/devices/platform/asus_laptop/wwan
|
||||
Date: October 2010
|
||||
KernelVersion: 2.6.37
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Control the wwan (3G) device. 1 means on, 0 means off.
|
||||
|
|
10
Documentation/ABI/testing/sysfs-platform-eeepc-wmi
Normal file
10
Documentation/ABI/testing/sysfs-platform-eeepc-wmi
Normal file
|
@ -0,0 +1,10 @@
|
|||
What: /sys/devices/platform/eeepc-wmi/cpufv
|
||||
Date: Oct 2010
|
||||
KernelVersion: 2.6.37
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Change CPU clock configuration (write-only).
|
||||
There are three available clock configuration:
|
||||
* 0 -> Super Performance Mode
|
||||
* 1 -> High Performance Mode
|
||||
* 2 -> Power Saving Mode
|
|
@ -79,10 +79,6 @@
|
|||
</sect2>
|
||||
</sect1>
|
||||
</chapter>
|
||||
<chapter id="clk">
|
||||
<title>Clock Framework Extensions</title>
|
||||
!Iinclude/linux/sh_clk.h
|
||||
</chapter>
|
||||
<chapter id="mach">
|
||||
<title>Machine Specific Interfaces</title>
|
||||
<sect1 id="dreamcast">
|
||||
|
|
|
@ -16,7 +16,7 @@
|
|||
</orgname>
|
||||
|
||||
<address>
|
||||
<email>hjk@linutronix.de</email>
|
||||
<email>hjk@hansjkoch.de</email>
|
||||
</address>
|
||||
</affiliation>
|
||||
</author>
|
||||
|
@ -114,7 +114,7 @@ GPL version 2.
|
|||
|
||||
<para>If you know of any translations for this document, or you are
|
||||
interested in translating it, please email me
|
||||
<email>hjk@linutronix.de</email>.
|
||||
<email>hjk@hansjkoch.de</email>.
|
||||
</para>
|
||||
</sect1>
|
||||
|
||||
|
@ -171,7 +171,7 @@ interested in translating it, please email me
|
|||
<title>Feedback</title>
|
||||
<para>Find something wrong with this document? (Or perhaps something
|
||||
right?) I would love to hear from you. Please email me at
|
||||
<email>hjk@linutronix.de</email>.</para>
|
||||
<email>hjk@hansjkoch.de</email>.</para>
|
||||
</sect1>
|
||||
</chapter>
|
||||
|
||||
|
|
|
@ -154,7 +154,7 @@ The stages that a patch goes through are, generally:
|
|||
inclusion, it should be accepted by a relevant subsystem maintainer -
|
||||
though this acceptance is not a guarantee that the patch will make it
|
||||
all the way to the mainline. The patch will show up in the maintainer's
|
||||
subsystem tree and into the staging trees (described below). When the
|
||||
subsystem tree and into the -next trees (described below). When the
|
||||
process works, this step leads to more extensive review of the patch and
|
||||
the discovery of any problems resulting from the integration of this
|
||||
patch with work being done by others.
|
||||
|
@ -236,7 +236,7 @@ finding the right maintainer. Sending patches directly to Linus is not
|
|||
normally the right way to go.
|
||||
|
||||
|
||||
2.4: STAGING TREES
|
||||
2.4: NEXT TREES
|
||||
|
||||
The chain of subsystem trees guides the flow of patches into the kernel,
|
||||
but it also raises an interesting question: what if somebody wants to look
|
||||
|
@ -250,7 +250,7 @@ changes land in the mainline kernel. One could pull changes from all of
|
|||
the interesting subsystem trees, but that would be a big and error-prone
|
||||
job.
|
||||
|
||||
The answer comes in the form of staging trees, where subsystem trees are
|
||||
The answer comes in the form of -next trees, where subsystem trees are
|
||||
collected for testing and review. The older of these trees, maintained by
|
||||
Andrew Morton, is called "-mm" (for memory management, which is how it got
|
||||
started). The -mm tree integrates patches from a long list of subsystem
|
||||
|
@ -275,7 +275,7 @@ directory at:
|
|||
Use of the MMOTM tree is likely to be a frustrating experience, though;
|
||||
there is a definite chance that it will not even compile.
|
||||
|
||||
The other staging tree, started more recently, is linux-next, maintained by
|
||||
The other -next tree, started more recently, is linux-next, maintained by
|
||||
Stephen Rothwell. The linux-next tree is, by design, a snapshot of what
|
||||
the mainline is expected to look like after the next merge window closes.
|
||||
Linux-next trees are announced on the linux-kernel and linux-next mailing
|
||||
|
@ -303,12 +303,25 @@ volatility of linux-next tends to make it a difficult development target.
|
|||
See http://lwn.net/Articles/289013/ for more information on this topic, and
|
||||
stay tuned; much is still in flux where linux-next is involved.
|
||||
|
||||
Besides the mmotm and linux-next trees, the kernel source tree now contains
|
||||
the drivers/staging/ directory and many sub-directories for drivers or
|
||||
filesystems that are on their way to being added to the kernel tree
|
||||
proper, but they remain in drivers/staging/ while they still need more
|
||||
work.
|
||||
2.4.1: STAGING TREES
|
||||
|
||||
The kernel source tree now contains the drivers/staging/ directory, where
|
||||
many sub-directories for drivers or filesystems that are on their way to
|
||||
being added to the kernel tree live. They remain in drivers/staging while
|
||||
they still need more work; once complete, they can be moved into the
|
||||
kernel proper. This is a way to keep track of drivers that aren't
|
||||
up to Linux kernel coding or quality standards, but people may want to use
|
||||
them and track development.
|
||||
|
||||
Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree.
|
||||
Drivers that still need work are sent to him, with each driver having
|
||||
its own subdirectory in drivers/staging/. Along with the driver source
|
||||
files, a TODO file should be present in the directory as well. The TODO
|
||||
file lists the pending work that the driver needs for acceptance into
|
||||
the kernel proper, as well as a list of people that should be Cc'd for any
|
||||
patches to the driver. Staging drivers that don't currently build should
|
||||
have their config entries depend upon CONFIG_BROKEN. Once they can
|
||||
be successfully built without outside patches, CONFIG_BROKEN can be removed.
|
||||
|
||||
2.5: TOOLS
|
||||
|
||||
|
|
|
@ -1,129 +0,0 @@
|
|||
|
||||
Device Interfaces
|
||||
|
||||
Introduction
|
||||
~~~~~~~~~~~~
|
||||
|
||||
Device interfaces are the logical interfaces of device classes that correlate
|
||||
directly to userspace interfaces, like device nodes.
|
||||
|
||||
Each device class may have multiple interfaces through which you can
|
||||
access the same device. An input device may support the mouse interface,
|
||||
the 'evdev' interface, and the touchscreen interface. A SCSI disk would
|
||||
support the disk interface, the SCSI generic interface, and possibly a raw
|
||||
device interface.
|
||||
|
||||
Device interfaces are registered with the class they belong to. As devices
|
||||
are added to the class, they are added to each interface registered with
|
||||
the class. The interface is responsible for determining whether the device
|
||||
supports the interface or not.
|
||||
|
||||
|
||||
Programming Interface
|
||||
~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
struct device_interface {
|
||||
char * name;
|
||||
rwlock_t lock;
|
||||
u32 devnum;
|
||||
struct device_class * devclass;
|
||||
|
||||
struct list_head node;
|
||||
struct driver_dir_entry dir;
|
||||
|
||||
int (*add_device)(struct device *);
|
||||
int (*add_device)(struct intf_data *);
|
||||
};
|
||||
|
||||
int interface_register(struct device_interface *);
|
||||
void interface_unregister(struct device_interface *);
|
||||
|
||||
|
||||
An interface must specify the device class it belongs to. It is added
|
||||
to that class's list of interfaces on registration.
|
||||
|
||||
|
||||
Interfaces can be added to a device class at any time. Whenever it is
|
||||
added, each device in the class is passed to the interface's
|
||||
add_device callback. When an interface is removed, each device is
|
||||
removed from the interface.
|
||||
|
||||
|
||||
Devices
|
||||
~~~~~~~
|
||||
Once a device is added to a device class, it is added to each
|
||||
interface that is registered with the device class. The class
|
||||
is expected to place a class-specific data structure in
|
||||
struct device::class_data. The interface can use that (along with
|
||||
other fields of struct device) to determine whether or not the driver
|
||||
and/or device support that particular interface.
|
||||
|
||||
|
||||
Data
|
||||
~~~~
|
||||
|
||||
struct intf_data {
|
||||
struct list_head node;
|
||||
struct device_interface * intf;
|
||||
struct device * dev;
|
||||
u32 intf_num;
|
||||
};
|
||||
|
||||
int interface_add_data(struct interface_data *);
|
||||
|
||||
The interface is responsible for allocating and initializing a struct
|
||||
intf_data and calling interface_add_data() to add it to the device's list
|
||||
of interfaces it belongs to. This list will be iterated over when the device
|
||||
is removed from the class (instead of all possible interfaces for a class).
|
||||
This structure should probably be embedded in whatever per-device data
|
||||
structure the interface is allocating anyway.
|
||||
|
||||
Devices are enumerated within the interface. This happens in interface_add_data()
|
||||
and the enumerated value is stored in the struct intf_data for that device.
|
||||
|
||||
sysfs
|
||||
~~~~~
|
||||
Each interface is given a directory in the directory of the device
|
||||
class it belongs to:
|
||||
|
||||
Interfaces get a directory in the class's directory as well:
|
||||
|
||||
class/
|
||||
`-- input
|
||||
|-- devices
|
||||
|-- drivers
|
||||
|-- mouse
|
||||
`-- evdev
|
||||
|
||||
When a device is added to the interface, a symlink is created that points
|
||||
to the device's directory in the physical hierarchy:
|
||||
|
||||
class/
|
||||
`-- input
|
||||
|-- devices
|
||||
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|
||||
|-- drivers
|
||||
| `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
|
||||
|-- mouse
|
||||
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|
||||
`-- evdev
|
||||
`-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|
||||
|
||||
|
||||
Future Plans
|
||||
~~~~~~~~~~~~
|
||||
A device interface is correlated directly with a userspace interface
|
||||
for a device, specifically a device node. For instance, a SCSI disk
|
||||
exposes at least two interfaces to userspace: the standard SCSI disk
|
||||
interface and the SCSI generic interface. It might also export a raw
|
||||
device interface.
|
||||
|
||||
Many interfaces have a major number associated with them and each
|
||||
device gets a minor number. Or, multiple interfaces might share one
|
||||
major number, and each will receive a range of minor numbers (like in
|
||||
the case of input devices).
|
||||
|
||||
These major and minor numbers could be stored in the interface
|
||||
structure. Major and minor allocations could happen when the interface
|
||||
is registered with the class, or via a helper function.
|
||||
|
|
@ -196,7 +196,7 @@ csrow3.
|
|||
The representation of the above is reflected in the directory tree
|
||||
in EDAC's sysfs interface. Starting in directory
|
||||
/sys/devices/system/edac/mc each memory controller will be represented
|
||||
by its own 'mcX' directory, where 'X" is the index of the MC.
|
||||
by its own 'mcX' directory, where 'X' is the index of the MC.
|
||||
|
||||
|
||||
..../edac/mc/
|
||||
|
@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
|
|||
....
|
||||
|
||||
Under each 'mcX' directory each 'csrowX' is again represented by a
|
||||
'csrowX', where 'X" is the csrow index:
|
||||
'csrowX', where 'X' is the csrow index:
|
||||
|
||||
|
||||
.../mc/mc0/
|
||||
|
@ -232,7 +232,7 @@ EDAC control and attribute files.
|
|||
|
||||
|
||||
In 'mcX' directories are EDAC control and attribute files for
|
||||
this 'X" instance of the memory controllers:
|
||||
this 'X' instance of the memory controllers:
|
||||
|
||||
|
||||
Counter reset control file:
|
||||
|
@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
|
|||
'csrowX' DIRECTORIES
|
||||
|
||||
In the 'csrowX' directories are EDAC control and attribute files for
|
||||
this 'X" instance of csrow:
|
||||
this 'X' instance of csrow:
|
||||
|
||||
|
||||
Total Uncorrectable Errors count attribute file:
|
||||
|
|
|
@ -4,33 +4,41 @@ please mail me.
|
|||
Geert Uytterhoeven <geert@linux-m68k.org>
|
||||
|
||||
00-INDEX
|
||||
- this file
|
||||
- this file.
|
||||
arkfb.txt
|
||||
- info on the fbdev driver for ARK Logic chips.
|
||||
aty128fb.txt
|
||||
- info on the ATI Rage128 frame buffer driver.
|
||||
cirrusfb.txt
|
||||
- info on the driver for Cirrus Logic chipsets.
|
||||
cmap_xfbdev.txt
|
||||
- an introduction to fbdev's cmap structures.
|
||||
deferred_io.txt
|
||||
- an introduction to deferred IO.
|
||||
efifb.txt
|
||||
- info on the EFI platform driver for Intel based Apple computers.
|
||||
ep93xx-fb.txt
|
||||
- info on the driver for EP93xx LCD controller.
|
||||
fbcon.txt
|
||||
- intro to and usage guide for the framebuffer console (fbcon).
|
||||
framebuffer.txt
|
||||
- introduction to frame buffer devices.
|
||||
imacfb.txt
|
||||
- info on the generic EFI platform driver for Intel based Macs.
|
||||
gxfb.txt
|
||||
- info on the framebuffer driver for AMD Geode GX2 based processors.
|
||||
intel810.txt
|
||||
- documentation for the Intel 810/815 framebuffer driver.
|
||||
intelfb.txt
|
||||
- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
|
||||
internals.txt
|
||||
- quick overview of frame buffer device internals.
|
||||
lxfb.txt
|
||||
- info on the framebuffer driver for AMD Geode LX based processors.
|
||||
matroxfb.txt
|
||||
- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
|
||||
metronomefb.txt
|
||||
- info on the driver for the Metronome display controller.
|
||||
modedb.txt
|
||||
- info on the video mode database.
|
||||
matroxfb.txt
|
||||
- info on the Matrox frame buffer driver.
|
||||
pvr2fb.txt
|
||||
- info on the PowerVR 2 frame buffer driver.
|
||||
pxafb.txt
|
||||
|
@ -39,13 +47,23 @@ s3fb.txt
|
|||
- info on the fbdev driver for S3 Trio/Virge chips.
|
||||
sa1100fb.txt
|
||||
- information about the driver for the SA-1100 LCD controller.
|
||||
sh7760fb.txt
|
||||
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
|
||||
sisfb.txt
|
||||
- info on the framebuffer device driver for various SiS chips.
|
||||
sstfb.txt
|
||||
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
|
||||
tgafb.txt
|
||||
- info on the TGA (DECChip 21030) frame buffer driver
|
||||
- info on the TGA (DECChip 21030) frame buffer driver.
|
||||
tridentfb.txt
|
||||
info on the framebuffer driver for some Trident chip based cards.
|
||||
uvesafb.txt
|
||||
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
|
||||
vesafb.txt
|
||||
- info on the VESA frame buffer device
|
||||
- info on the VESA frame buffer device.
|
||||
viafb.modes
|
||||
- list of modes for VIA Integration Graphic Chip.
|
||||
viafb.txt
|
||||
- info on the VIA Integration Graphic Chip console framebuffer driver.
|
||||
vt8623fb.txt
|
||||
- info on the fb driver for the graphics core in VIA VT8623 chipsets.
|
||||
|
|
|
@ -173,12 +173,13 @@ prototypes:
|
|||
sector_t (*bmap)(struct address_space *, sector_t);
|
||||
int (*invalidatepage) (struct page *, unsigned long);
|
||||
int (*releasepage) (struct page *, int);
|
||||
void (*freepage)(struct page *);
|
||||
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
|
||||
loff_t offset, unsigned long nr_segs);
|
||||
int (*launder_page) (struct page *);
|
||||
|
||||
locking rules:
|
||||
All except set_page_dirty may block
|
||||
All except set_page_dirty and freepage may block
|
||||
|
||||
BKL PageLocked(page) i_mutex
|
||||
writepage: no yes, unlocks (see below)
|
||||
|
@ -193,6 +194,7 @@ perform_write: no n/a yes
|
|||
bmap: no
|
||||
invalidatepage: no yes
|
||||
releasepage: no yes
|
||||
freepage: no yes
|
||||
direct_IO: no
|
||||
launder_page: no yes
|
||||
|
||||
|
@ -288,6 +290,9 @@ buffers from the page in preparation for freeing it. It returns zero to
|
|||
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
|
||||
the kernel assumes that the fs has no private interest in the buffers.
|
||||
|
||||
->freepage() is called when the kernel is done dropping the page
|
||||
from the page cache.
|
||||
|
||||
->launder_page() may be called prior to releasing a page if
|
||||
it is still found to be dirty. It returns zero if the page was successfully
|
||||
cleaned, or an error value if not. Note that in order to prevent the page
|
||||
|
|
|
@ -89,7 +89,7 @@ static ssize_t childless_storeme_write(struct childless *childless,
|
|||
char *p = (char *) page;
|
||||
|
||||
tmp = simple_strtoul(p, &p, 10);
|
||||
if (!p || (*p && (*p != '\n')))
|
||||
if ((*p != '\0') && (*p != '\n'))
|
||||
return -EINVAL;
|
||||
|
||||
if (tmp > INT_MAX)
|
||||
|
|
|
@ -534,6 +534,7 @@ struct address_space_operations {
|
|||
sector_t (*bmap)(struct address_space *, sector_t);
|
||||
int (*invalidatepage) (struct page *, unsigned long);
|
||||
int (*releasepage) (struct page *, int);
|
||||
void (*freepage)(struct page *);
|
||||
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
|
||||
loff_t offset, unsigned long nr_segs);
|
||||
struct page* (*get_xip_page)(struct address_space *, sector_t,
|
||||
|
@ -660,11 +661,10 @@ struct address_space_operations {
|
|||
releasepage: releasepage is called on PagePrivate pages to indicate
|
||||
that the page should be freed if possible. ->releasepage
|
||||
should remove any private data from the page and clear the
|
||||
PagePrivate flag. It may also remove the page from the
|
||||
address_space. If this fails for some reason, it may indicate
|
||||
failure with a 0 return value.
|
||||
This is used in two distinct though related cases. The first
|
||||
is when the VM finds a clean page with no active users and
|
||||
PagePrivate flag. If releasepage() fails for some reason, it must
|
||||
indicate failure with a 0 return value.
|
||||
releasepage() is used in two distinct though related cases. The
|
||||
first is when the VM finds a clean page with no active users and
|
||||
wants to make it a free page. If ->releasepage succeeds, the
|
||||
page will be removed from the address_space and become free.
|
||||
|
||||
|
@ -679,6 +679,12 @@ struct address_space_operations {
|
|||
need to ensure this. Possibly it can clear the PageUptodate
|
||||
bit if it cannot free private data yet.
|
||||
|
||||
freepage: freepage is called once the page is no longer visible in
|
||||
the page cache in order to allow the cleanup of any private
|
||||
data. Since it may be called by the memory reclaimer, it
|
||||
should not assume that the original address_space mapping still
|
||||
exists, and it should not block.
|
||||
|
||||
direct_IO: called by the generic read/write routines to perform
|
||||
direct_IO - that is IO requests which bypass the page cache
|
||||
and transfer data directly between the storage and the
|
||||
|
|
|
@ -617,6 +617,16 @@ and have the following read/write attributes:
|
|||
is configured as an output, this value may be written;
|
||||
any nonzero value is treated as high.
|
||||
|
||||
If the pin can be configured as interrupt-generating interrupt
|
||||
and if it has been configured to generate interrupts (see the
|
||||
description of "edge"), you can poll(2) on that file and
|
||||
poll(2) will return whenever the interrupt was triggered. If
|
||||
you use poll(2), set the events POLLPRI and POLLERR. If you
|
||||
use select(2), set the file descriptor in exceptfds. After
|
||||
poll(2) returns, either lseek(2) to the beginning of the sysfs
|
||||
file and read the new value or close the file and re-open it
|
||||
to read the value.
|
||||
|
||||
"edge" ... reads as either "none", "rising", "falling", or
|
||||
"both". Write these strings to select the signal edge(s)
|
||||
that will make poll(2) on the "value" file return.
|
||||
|
|
|
@ -11,7 +11,7 @@ Authors:
|
|||
Mark M. Hoffman <mhoffman@lightlink.com>
|
||||
Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
|
||||
Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
|
||||
Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
|
||||
Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
|
||||
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
|
|
@ -8,7 +8,7 @@ Supported chips:
|
|||
Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
|
||||
|
||||
Authors:
|
||||
Hans J. Koch <hjk@linutronix.de>
|
||||
Hans J. Koch <hjk@hansjkoch.de>
|
||||
John Morris <john.morris@spirentcom.com>
|
||||
Claus Gindhart <claus.gindhart@kontron.com>
|
||||
|
||||
|
|
|
@ -2385,6 +2385,11 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
improve throughput, but will also increase the
|
||||
amount of memory reserved for use by the client.
|
||||
|
||||
swapaccount[=0|1]
|
||||
[KNL] Enable accounting of swap in memory resource
|
||||
controller if no parameter or 1 is given or disable
|
||||
it if 0 is given (See Documentation/cgroups/memory.txt)
|
||||
|
||||
swiotlb= [IA-64] Number of I/O TLB slabs
|
||||
|
||||
switches= [HW,M68k]
|
||||
|
|
|
@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
|
|||
Count buffering overhead as bytes/2^tcp_adv_win_scale
|
||||
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
|
||||
if it is <= 0.
|
||||
Possible values are [-31, 31], inclusive.
|
||||
Default: 2
|
||||
|
||||
tcp_allowed_congestion_control - STRING
|
||||
|
|
|
@ -37,6 +37,9 @@ Typical usage of the OPP library is as follows:
|
|||
SoC framework -> modifies on required cases certain OPPs -> OPP layer
|
||||
-> queries to search/retrieve information ->
|
||||
|
||||
Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
|
||||
to make the OPP layer available.
|
||||
|
||||
OPP layer expects each domain to be represented by a unique device pointer. SoC
|
||||
framework registers a set of initial OPPs per device with the OPP layer. This
|
||||
list is expected to be an optimally small number typically around 5 per device.
|
||||
|
|
|
@ -1,32 +0,0 @@
|
|||
Clock framework on SuperH architecture
|
||||
|
||||
The framework on SH extends existing API by the function clk_set_rate_ex,
|
||||
which prototype is as follows:
|
||||
|
||||
clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
|
||||
|
||||
The algo_id parameter is used to specify algorithm used to recalculate clocks,
|
||||
adjanced to clock, specified as first argument. It is assumed that algo_id==0
|
||||
means no changes to adjanced clock
|
||||
|
||||
Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
|
||||
if it is present in ops structure. The method should set the clock rate and adjust
|
||||
all needed clocks according to the passed algo_id.
|
||||
Exact values for algo_id are machine-dependent. For the sh7722, the following
|
||||
values are defined:
|
||||
|
||||
NO_CHANGE = 0,
|
||||
IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */
|
||||
IUS_322, /* I:U:Sh = 3:2:2 */
|
||||
IUS_522, /* I:U:Sh = 5:2:2 */
|
||||
IUS_N11, /* I:U:Sh = N:1:1 */
|
||||
SB_N1, /* Sh:B = N:1 */
|
||||
SB3_N1, /* Sh:B3 = N:1 */
|
||||
SB3_32, /* Sh:B3 = 3:2 */
|
||||
SB3_43, /* Sh:B3 = 4:3 */
|
||||
SB3_54, /* Sh:B3 = 5:4 */
|
||||
BP_N1, /* B:P = N:1 */
|
||||
IP_N1 /* I:P = N:1 */
|
||||
|
||||
Each of these constants means relation between clocks that can be set via the FRQCR
|
||||
register
|
40
MAINTAINERS
40
MAINTAINERS
|
@ -559,14 +559,14 @@ W: http://maxim.org.za/at91_26.html
|
|||
S: Maintained
|
||||
|
||||
ARM/BCMRING ARM ARCHITECTURE
|
||||
M: Leo Chen <leochen@broadcom.com>
|
||||
M: Jiandong Zheng <jdzheng@broadcom.com>
|
||||
M: Scott Branden <sbranden@broadcom.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: arch/arm/mach-bcmring
|
||||
|
||||
ARM/BCMRING MTD NAND DRIVER
|
||||
M: Leo Chen <leochen@broadcom.com>
|
||||
M: Jiandong Zheng <jdzheng@broadcom.com>
|
||||
M: Scott Branden <sbranden@broadcom.com>
|
||||
L: linux-mtd@lists.infradead.org
|
||||
S: Maintained
|
||||
|
@ -815,7 +815,7 @@ F: drivers/mmc/host/msm_sdcc.c
|
|||
F: drivers/mmc/host/msm_sdcc.h
|
||||
F: drivers/serial/msm_serial.h
|
||||
F: drivers/serial/msm_serial.c
|
||||
T: git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
|
||||
T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
|
||||
S: Maintained
|
||||
|
||||
ARM/TOSA MACHINE SUPPORT
|
||||
|
@ -1359,7 +1359,7 @@ F: include/net/bluetooth/
|
|||
|
||||
BONDING DRIVER
|
||||
M: Jay Vosburgh <fubar@us.ibm.com>
|
||||
L: bonding-devel@lists.sourceforge.net
|
||||
L: netdev@vger.kernel.org
|
||||
W: http://sourceforge.net/projects/bonding/
|
||||
S: Supported
|
||||
F: drivers/net/bonding/
|
||||
|
@ -1829,6 +1829,13 @@ W: http://www.chelsio.com
|
|||
S: Supported
|
||||
F: drivers/net/cxgb4vf/
|
||||
|
||||
STMMAC ETHERNET DRIVER
|
||||
M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
||||
L: netdev@vger.kernel.org
|
||||
W: http://www.stlinux.com
|
||||
S: Supported
|
||||
F: drivers/net/stmmac/
|
||||
|
||||
CYBERPRO FB DRIVER
|
||||
M: Russell King <linux@arm.linux.org.uk>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
@ -2008,6 +2015,7 @@ F: drivers/hwmon/dme1737.c
|
|||
DOCBOOK FOR DOCUMENTATION
|
||||
M: Randy Dunlap <rdunlap@xenotime.net>
|
||||
S: Maintained
|
||||
F: scripts/kernel-doc
|
||||
|
||||
DOCKING STATION DRIVER
|
||||
M: Shaohua Li <shaohua.li@intel.com>
|
||||
|
@ -2018,6 +2026,7 @@ F: drivers/acpi/dock.c
|
|||
DOCUMENTATION
|
||||
M: Randy Dunlap <rdunlap@xenotime.net>
|
||||
L: linux-doc@vger.kernel.org
|
||||
T: quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
|
||||
S: Maintained
|
||||
F: Documentation/
|
||||
|
||||
|
@ -2051,7 +2060,7 @@ F: Documentation/blockdev/drbd/
|
|||
|
||||
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
|
||||
M: Greg Kroah-Hartman <gregkh@suse.de>
|
||||
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
|
||||
S: Supported
|
||||
F: Documentation/kobject.txt
|
||||
F: drivers/base/
|
||||
|
@ -2071,7 +2080,7 @@ F: include/drm/
|
|||
|
||||
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
|
||||
M: Chris Wilson <chris@chris-wilson.co.uk>
|
||||
L: intel-gfx@lists.freedesktop.org
|
||||
L: intel-gfx@lists.freedesktop.org (subscribers-only)
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
|
||||
S: Supported
|
||||
|
@ -2435,10 +2444,12 @@ F: drivers/net/wan/sdla.c
|
|||
FRAMEBUFFER LAYER
|
||||
L: linux-fbdev@vger.kernel.org
|
||||
W: http://linux-fbdev.sourceforge.net/
|
||||
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
|
||||
S: Orphan
|
||||
F: Documentation/fb/
|
||||
F: drivers/video/fb*
|
||||
F: drivers/video/
|
||||
F: include/video/
|
||||
F: include/linux/fb.h
|
||||
|
||||
FREESCALE DMA DRIVER
|
||||
|
@ -4053,9 +4064,8 @@ F: drivers/scsi/NCR_D700.*
|
|||
|
||||
NETEFFECT IWARP RNIC DRIVER (IW_NES)
|
||||
M: Faisal Latif <faisal.latif@intel.com>
|
||||
M: Chien Tung <chien.tin.tung@intel.com>
|
||||
L: linux-rdma@vger.kernel.org
|
||||
W: http://www.neteffect.com
|
||||
W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
|
||||
S: Supported
|
||||
F: drivers/infiniband/hw/nes/
|
||||
|
||||
|
@ -5828,6 +5838,8 @@ M: Chris Metcalf <cmetcalf@tilera.com>
|
|||
W: http://www.tilera.com/scm/
|
||||
S: Supported
|
||||
F: arch/tile/
|
||||
F: drivers/char/hvc_tile.c
|
||||
F: drivers/net/tile/
|
||||
|
||||
TLAN NETWORK DRIVER
|
||||
M: Samuel Chessman <chessman@tux.org>
|
||||
|
@ -5920,7 +5932,6 @@ F: include/linux/tty.h
|
|||
|
||||
TULIP NETWORK DRIVERS
|
||||
M: Grant Grundler <grundler@parisc-linux.org>
|
||||
M: Kyle McMartin <kyle@mcmartin.ca>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/tulip/
|
||||
|
@ -6572,6 +6583,15 @@ F: include/linux/mfd/wm8400*
|
|||
F: include/sound/wm????.h
|
||||
F: sound/soc/codecs/wm*
|
||||
|
||||
WORKQUEUE
|
||||
M: Tejun Heo <tj@kernel.org>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
|
||||
S: Maintained
|
||||
F: include/linux/workqueue.h
|
||||
F: kernel/workqueue.c
|
||||
F: Documentation/workqueue.txt
|
||||
|
||||
X.25 NETWORK LAYER
|
||||
M: Andrew Hendry <andrew.hendry@gmail.com>
|
||||
L: linux-x25@vger.kernel.org
|
||||
|
|
2
Makefile
2
Makefile
|
@ -1,7 +1,7 @@
|
|||
VERSION = 2
|
||||
PATCHLEVEL = 6
|
||||
SUBLEVEL = 37
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc6
|
||||
NAME = Flesh-Eating Bats with Fangs
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
|
|
@ -9,7 +9,7 @@ config ARM
|
|||
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
|
||||
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
|
||||
select HAVE_ARCH_KGDB
|
||||
select HAVE_KPROBES if (!XIP_KERNEL)
|
||||
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
|
||||
select HAVE_KRETPROBES if (HAVE_KPROBES)
|
||||
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
|
||||
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
|
||||
|
@ -1311,7 +1311,7 @@ config HZ
|
|||
|
||||
config THUMB2_KERNEL
|
||||
bool "Compile the kernel in Thumb-2 mode"
|
||||
depends on CPU_V7 && EXPERIMENTAL
|
||||
depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
|
||||
select AEABI
|
||||
select ARM_ASM_UNIFIED
|
||||
help
|
||||
|
@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"
|
|||
|
||||
config FPE_NWFPE
|
||||
bool "NWFPE math emulation"
|
||||
depends on !AEABI || OABI_COMPAT
|
||||
depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
|
||||
---help---
|
||||
Say Y to include the NWFPE floating point emulator in the kernel.
|
||||
This is necessary to run most binaries. Linux does not currently
|
||||
|
|
|
@ -70,12 +70,7 @@ else
|
|||
$(obj)/uImage: LOADADDR=$(ZRELADDR)
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_THUMB2_KERNEL),y)
|
||||
# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
|
||||
$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
|
||||
else
|
||||
$(obj)/uImage: STARTADDR=$(LOADADDR)
|
||||
endif
|
||||
|
||||
$(obj)/uImage: $(obj)/zImage FORCE
|
||||
$(call if_changed,uimage)
|
||||
|
|
|
@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
|
|||
|
||||
.size _start, . - _start
|
||||
|
||||
.align
|
||||
|
||||
.type data,#object
|
||||
data: .word initrd_start @ source initrd address
|
||||
.word initrd_phys @ destination initrd address
|
||||
|
|
|
@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
|
|||
* sort out different calling conventions
|
||||
*/
|
||||
.align
|
||||
.arm @ Always enter in ARM state
|
||||
start:
|
||||
.type start,#function
|
||||
.rept 8
|
||||
THUMB( adr r12, BSYM(1f) )
|
||||
THUMB( bx r12 )
|
||||
THUMB( .rept 6 )
|
||||
ARM( .rept 8 )
|
||||
mov r0, r0
|
||||
.endr
|
||||
|
||||
|
@ -135,6 +139,7 @@ start:
|
|||
.word 0x016f2818 @ Magic numbers to help the loader
|
||||
.word start @ absolute load/run zImage address
|
||||
.word _edata @ zImage end address
|
||||
THUMB( .thumb )
|
||||
1: mov r7, r1 @ save architecture ID
|
||||
mov r8, r2 @ save atags pointer
|
||||
|
||||
|
@ -174,7 +179,8 @@ not_angel:
|
|||
ldr sp, [r0, #28]
|
||||
#ifdef CONFIG_AUTO_ZRELADDR
|
||||
@ determine final kernel image address
|
||||
and r4, pc, #0xf8000000
|
||||
mov r4, pc
|
||||
and r4, r4, #0xf8000000
|
||||
add r4, r4, #TEXT_OFFSET
|
||||
#else
|
||||
ldr r4, =zreladdr
|
||||
|
@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
|
|||
*/
|
||||
mov r1, #0x1e
|
||||
orr r1, r1, #3 << 10
|
||||
mov r2, pc, lsr #20
|
||||
mov r2, pc
|
||||
mov r2, r2, lsr #20
|
||||
orr r1, r1, r2, lsl #20
|
||||
add r0, r3, r2, lsl #2
|
||||
str r1, [r0], #4
|
||||
|
@ -1084,6 +1091,6 @@ memdump: mov r12, r0
|
|||
reloc_end:
|
||||
|
||||
.align
|
||||
.section ".stack", "w"
|
||||
.section ".stack", "aw", %nobits
|
||||
user_stack: .space 4096
|
||||
user_stack_end:
|
||||
|
|
|
@ -57,7 +57,7 @@ SECTIONS
|
|||
.bss : { *(.bss) }
|
||||
_end = .;
|
||||
|
||||
.stack (NOLOAD) : { *(.stack) }
|
||||
.stack : { *(.stack) }
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
|
|
|
@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
|||
unsigned int shift = (irq % 4) * 8;
|
||||
unsigned int cpu = cpumask_first(mask_val);
|
||||
u32 val;
|
||||
struct irq_desc *desc;
|
||||
|
||||
spin_lock(&irq_controller_lock);
|
||||
irq_desc[irq].node = cpu;
|
||||
desc = irq_to_desc(irq);
|
||||
if (desc == NULL) {
|
||||
spin_unlock(&irq_controller_lock);
|
||||
return -EINVAL;
|
||||
}
|
||||
desc->node = cpu;
|
||||
val = readl(reg) & ~(0xff << shift);
|
||||
val |= 1 << (cpu + shift);
|
||||
writel(val, reg);
|
||||
|
@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
|
|||
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
|
||||
unsigned int irq_start)
|
||||
{
|
||||
unsigned int max_irq, i;
|
||||
unsigned int gic_irqs, irq_limit, i;
|
||||
u32 cpumask = 1 << smp_processor_id();
|
||||
|
||||
if (gic_nr >= MAX_GIC_NR)
|
||||
|
@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
|
|||
|
||||
/*
|
||||
* Find out how many interrupts are supported.
|
||||
*/
|
||||
max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
|
||||
max_irq = (max_irq + 1) * 32;
|
||||
|
||||
/*
|
||||
* The GIC only supports up to 1020 interrupt sources.
|
||||
* Limit this to either the architected maximum, or the
|
||||
* platform maximum.
|
||||
*/
|
||||
if (max_irq > max(1020, NR_IRQS))
|
||||
max_irq = max(1020, NR_IRQS);
|
||||
gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
|
||||
gic_irqs = (gic_irqs + 1) * 32;
|
||||
if (gic_irqs > 1020)
|
||||
gic_irqs = 1020;
|
||||
|
||||
/*
|
||||
* Set all global interrupts to be level triggered, active low.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 16)
|
||||
for (i = 32; i < gic_irqs; i += 16)
|
||||
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
|
||||
|
||||
/*
|
||||
* Set all global interrupts to this CPU only.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 4)
|
||||
for (i = 32; i < gic_irqs; i += 4)
|
||||
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
|
||||
|
||||
/*
|
||||
* Set priority on all global interrupts.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 4)
|
||||
for (i = 32; i < gic_irqs; i += 4)
|
||||
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
|
||||
|
||||
/*
|
||||
* Disable all interrupts. Leave the PPI and SGIs alone
|
||||
* as these enables are banked registers.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 32)
|
||||
for (i = 32; i < gic_irqs; i += 32)
|
||||
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
|
||||
|
||||
/*
|
||||
* Limit number of interrupts registered to the platform maximum
|
||||
*/
|
||||
irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
|
||||
if (WARN_ON(irq_limit > NR_IRQS))
|
||||
irq_limit = NR_IRQS;
|
||||
|
||||
/*
|
||||
* Setup the Linux IRQ subsystem.
|
||||
*/
|
||||
for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
|
||||
for (i = irq_start; i < irq_limit; i++) {
|
||||
set_irq_chip(i, &gic_chip);
|
||||
set_irq_chip_data(i, &gic_data[gic_nr]);
|
||||
set_irq_handler(i, handle_level_irq);
|
||||
|
|
341
arch/arm/configs/at91rm9200_defconfig
Normal file
341
arch/arm/configs/at91rm9200_defconfig
Normal file
|
@ -0,0 +1,341 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ONEARM=y
|
||||
CONFIG_ARCH_AT91RM9200DK=y
|
||||
CONFIG_MACH_AT91RM9200EK=y
|
||||
CONFIG_MACH_CSB337=y
|
||||
CONFIG_MACH_CSB637=y
|
||||
CONFIG_MACH_CARMEVA=y
|
||||
CONFIG_MACH_ATEB9200=y
|
||||
CONFIG_MACH_KB9200=y
|
||||
CONFIG_MACH_PICOTUX2XX=y
|
||||
CONFIG_MACH_KAFA=y
|
||||
CONFIG_MACH_ECBAT91=y
|
||||
CONFIG_MACH_YL9200=y
|
||||
CONFIG_MACH_CPUAT91=y
|
||||
CONFIG_MACH_ECO920=y
|
||||
CONFIG_MTD_AT91_DATAFLASH_CARD=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_AT91_TIMER_HZ=100
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x10000000
|
||||
CONFIG_ZBOOT_ROM_BSS=0x20040000
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=m
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_NET_IPIP=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_INET_AH=m
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_IPCOMP=m
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET_XFRM_MODE_BEET=m
|
||||
CONFIG_IPV6_PRIVACY=y
|
||||
CONFIG_IPV6_ROUTER_PREF=y
|
||||
CONFIG_IPV6_ROUTE_INFO=y
|
||||
CONFIG_INET6_AH=m
|
||||
CONFIG_INET6_ESP=m
|
||||
CONFIG_INET6_IPCOMP=m
|
||||
CONFIG_IPV6_MIP6=m
|
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_L2CAP=m
|
||||
CONFIG_BT_SCO=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_AFS_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_EEPROM_LEGACY=m
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_TUN=m
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_USB_CATC=m
|
||||
CONFIG_USB_KAWETH=m
|
||||
CONFIG_USB_PEGASUS=m
|
||||
CONFIG_USB_RTL8150=m
|
||||
CONFIG_USB_USBNET=m
|
||||
CONFIG_USB_NET_DM9601=m
|
||||
CONFIG_USB_NET_GL620A=m
|
||||
CONFIG_USB_NET_PLUSB=m
|
||||
CONFIG_USB_NET_RNDIS_HOST=m
|
||||
CONFIG_USB_ALI_M5632=y
|
||||
CONFIG_USB_AN2720=y
|
||||
CONFIG_USB_EPSON2888=y
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
CONFIG_PPP_DEFLATE=y
|
||||
CONFIG_PPP_BSDCOMP=y
|
||||
CONFIG_PPP_MPPE=m
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_SLIP=m
|
||||
CONFIG_SLIP_COMPRESSED=y
|
||||
CONFIG_SLIP_SMART=y
|
||||
CONFIG_SLIP_MODE_SLIP6=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_SENSORS_ADM1021=m
|
||||
CONFIG_SENSORS_ADM1025=m
|
||||
CONFIG_SENSORS_ADM1026=m
|
||||
CONFIG_SENSORS_ADM1029=m
|
||||
CONFIG_SENSORS_ADM1031=m
|
||||
CONFIG_SENSORS_ADM9240=m
|
||||
CONFIG_SENSORS_DS1621=m
|
||||
CONFIG_SENSORS_GL518SM=m
|
||||
CONFIG_SENSORS_GL520SM=m
|
||||
CONFIG_SENSORS_IT87=m
|
||||
CONFIG_SENSORS_LM63=m
|
||||
CONFIG_SENSORS_LM73=m
|
||||
CONFIG_SENSORS_LM75=m
|
||||
CONFIG_SENSORS_LM77=m
|
||||
CONFIG_SENSORS_LM78=m
|
||||
CONFIG_SENSORS_LM80=m
|
||||
CONFIG_SENSORS_LM83=m
|
||||
CONFIG_SENSORS_LM85=m
|
||||
CONFIG_SENSORS_LM87=m
|
||||
CONFIG_SENSORS_LM90=m
|
||||
CONFIG_SENSORS_LM92=m
|
||||
CONFIG_SENSORS_MAX1619=m
|
||||
CONFIG_SENSORS_PCF8591=m
|
||||
CONFIG_SENSORS_SMSC47B397=m
|
||||
CONFIG_SENSORS_W83781D=m
|
||||
CONFIG_SENSORS_W83791D=m
|
||||
CONFIG_SENSORS_W83792D=m
|
||||
CONFIG_SENSORS_W83793=m
|
||||
CONFIG_SENSORS_W83L785TS=m
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_TILEBLITTING=y
|
||||
CONFIG_FB_S1D13XXX=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
CONFIG_DISPLAY_SUPPORT=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_MINI_4x6=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
||||
CONFIG_USB_SERIAL_MCT_U232=y
|
||||
CONFIG_USB_SERIAL_PL2303=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_PCF8563=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_NTFS_FS=m
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_JFFS2_LZO=y
|
||||
CONFIG_JFFS2_RUBIN=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_MINIX_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
||||
CONFIG_SMB_FS=m
|
||||
CONFIG_CIFS=m
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_737=m
|
||||
CONFIG_NLS_CODEPAGE_775=m
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_CODEPAGE_852=m
|
||||
CONFIG_NLS_CODEPAGE_855=m
|
||||
CONFIG_NLS_CODEPAGE_857=m
|
||||
CONFIG_NLS_CODEPAGE_860=m
|
||||
CONFIG_NLS_CODEPAGE_861=m
|
||||
CONFIG_NLS_CODEPAGE_862=m
|
||||
CONFIG_NLS_CODEPAGE_863=m
|
||||
CONFIG_NLS_CODEPAGE_864=m
|
||||
CONFIG_NLS_CODEPAGE_865=m
|
||||
CONFIG_NLS_CODEPAGE_866=m
|
||||
CONFIG_NLS_CODEPAGE_869=m
|
||||
CONFIG_NLS_CODEPAGE_936=m
|
||||
CONFIG_NLS_CODEPAGE_950=m
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_CODEPAGE_949=m
|
||||
CONFIG_NLS_CODEPAGE_874=m
|
||||
CONFIG_NLS_ISO8859_8=m
|
||||
CONFIG_NLS_CODEPAGE_1250=m
|
||||
CONFIG_NLS_CODEPAGE_1251=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_2=m
|
||||
CONFIG_NLS_ISO8859_3=m
|
||||
CONFIG_NLS_ISO8859_4=m
|
||||
CONFIG_NLS_ISO8859_5=m
|
||||
CONFIG_NLS_ISO8859_6=m
|
||||
CONFIG_NLS_ISO8859_7=m
|
||||
CONFIG_NLS_ISO8859_9=m
|
||||
CONFIG_NLS_ISO8859_13=m
|
||||
CONFIG_NLS_ISO8859_14=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_KOI8_R=m
|
||||
CONFIG_NLS_KOI8_U=m
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
|
@ -1,72 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91RM9200DK=y
|
||||
CONFIG_MACH_ECO920=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,73 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_AT91RM9200EK=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_S1D13XXX=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,131 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=m
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ATEB9200=y
|
||||
CONFIG_PCCARD=m
|
||||
CONFIG_AT91_CF=m
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK_RO=y
|
||||
CONFIG_BLK_DEV_LOOP=m
|
||||
CONFIG_BLK_DEV_NBD=m
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=m
|
||||
CONFIG_TUN=m
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
CONFIG_USB_USBNET=y
|
||||
CONFIG_USB_NET_GL620A=y
|
||||
CONFIG_USB_NET_PLUSB=y
|
||||
CONFIG_USB_NET_RNDIS_HOST=y
|
||||
CONFIG_USB_ALI_M5632=y
|
||||
CONFIG_USB_AN2720=y
|
||||
CONFIG_USB_EPSON2888=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_SYNC_TTY=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
CONFIG_I2C_GPIO=m
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_USB_HID=m
|
||||
CONFIG_HID_PID=y
|
||||
CONFIG_USB_HIDDEV=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_STORAGE_DATAFAB=m
|
||||
CONFIG_USB_STORAGE_FREECOM=m
|
||||
CONFIG_USB_STORAGE_USBAT=m
|
||||
CONFIG_USB_STORAGE_SDDR09=m
|
||||
CONFIG_USB_STORAGE_SDDR55=m
|
||||
CONFIG_USB_STORAGE_JUMPSHOT=m
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=m
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
CONFIG_USB_GADGET=m
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_FILE_STORAGE=m
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=m
|
||||
CONFIG_EXT3_FS=m
|
||||
CONFIG_REISERFS_FS=m
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_NTFS_FS=m
|
||||
CONFIG_NTFS_RW=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_NFSD=m
|
||||
CONFIG_NFSD_V4=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
CONFIG_MINIX_SUBPARTITION=y
|
||||
CONFIG_SOLARIS_X86_PARTITION=y
|
||||
CONFIG_UNIXWARE_DISKLABEL=y
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_ARC4=m
|
||||
CONFIG_CRC16=m
|
||||
CONFIG_LIBCRC32C=m
|
|
@ -1,47 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CARMEVA=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_SERIO=m
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
|
@ -1,112 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CPUAT91=y
|
||||
CONFIG_AT91_TIMER_HZ=100
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
CONFIG_PPP_DEFLATE=y
|
||||
CONFIG_PPP_BSDCOMP=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_HID_SUPPORT is not set
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_PCF8563=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_MINIX_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
|
@ -1,104 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CSB337=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_SSC=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
||||
CONFIG_USB_SERIAL_MCT_U232=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
|
||||
# CONFIG_RTC_INTF_SYSFS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,98 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CSB637=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
||||
CONFIG_USB_SERIAL_MCT_U232=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,99 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ECBAT91=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_AFS_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_PRINTER=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
|
@ -1,61 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_KAFA=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK_RO=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_DES=y
|
|
@ -1,127 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_KALLSYMS_EXTRA_PASS=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_KB9200=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x10000000
|
||||
CONFIG_ZBOOT_ROM_BSS=0x20040000
|
||||
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
# CONFIG_FIRMWARE_IN_KERNEL is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=16384
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_ATMEL_SSC=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_CONSTANTS=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SPI_ATTRS=m
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_TILEBLITTING=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
# CONFIG_LCD_CLASS_DEVICE is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_MINI_4x6=y
|
||||
# CONFIG_HID_SUPPORT is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_LIBUSUAL=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
|
@ -1,80 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ONEARM=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IPV6=y
|
||||
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET6_XFRM_MODE_BEET is not set
|
||||
# CONFIG_IPV6_SIT is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,242 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=m
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_PICOTUX2XX=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=m
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=m
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=m
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_NET_IPIP=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_INET_AH=m
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_IPCOMP=m
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET_XFRM_MODE_BEET=m
|
||||
CONFIG_INET_DIAG=m
|
||||
CONFIG_IPV6_PRIVACY=y
|
||||
CONFIG_IPV6_ROUTER_PREF=y
|
||||
CONFIG_IPV6_ROUTE_INFO=y
|
||||
CONFIG_INET6_AH=m
|
||||
CONFIG_INET6_ESP=m
|
||||
CONFIG_INET6_IPCOMP=m
|
||||
CONFIG_IPV6_MIP6=m
|
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_L2CAP=m
|
||||
CONFIG_BT_SCO=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_FW_LOADER=m
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_LOOP=m
|
||||
CONFIG_EEPROM_LEGACY=m
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_TUN=m
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
CONFIG_USB_CATC=m
|
||||
CONFIG_USB_KAWETH=m
|
||||
CONFIG_USB_PEGASUS=m
|
||||
CONFIG_USB_RTL8150=m
|
||||
CONFIG_USB_USBNET=m
|
||||
CONFIG_USB_NET_DM9601=m
|
||||
CONFIG_USB_NET_GL620A=m
|
||||
CONFIG_USB_NET_PLUSB=m
|
||||
CONFIG_USB_NET_MCS7830=m
|
||||
CONFIG_USB_NET_RNDIS_HOST=m
|
||||
CONFIG_USB_ALI_M5632=y
|
||||
CONFIG_USB_AN2720=y
|
||||
CONFIG_USB_EPSON2888=y
|
||||
CONFIG_USB_KC2190=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPP_MPPE=m
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_SLIP=m
|
||||
CONFIG_SLIP_COMPRESSED=y
|
||||
CONFIG_SLIP_SMART=y
|
||||
CONFIG_SLIP_MODE_SLIP6=y
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
CONFIG_I2C_GPIO=m
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_SENSORS_ADM1021=m
|
||||
CONFIG_SENSORS_ADM1025=m
|
||||
CONFIG_SENSORS_ADM1026=m
|
||||
CONFIG_SENSORS_ADM1029=m
|
||||
CONFIG_SENSORS_ADM1031=m
|
||||
CONFIG_SENSORS_ADM9240=m
|
||||
CONFIG_SENSORS_DS1621=m
|
||||
CONFIG_SENSORS_GL518SM=m
|
||||
CONFIG_SENSORS_GL520SM=m
|
||||
CONFIG_SENSORS_IT87=m
|
||||
CONFIG_SENSORS_LM63=m
|
||||
CONFIG_SENSORS_LM75=m
|
||||
CONFIG_SENSORS_LM77=m
|
||||
CONFIG_SENSORS_LM78=m
|
||||
CONFIG_SENSORS_LM80=m
|
||||
CONFIG_SENSORS_LM83=m
|
||||
CONFIG_SENSORS_LM85=m
|
||||
CONFIG_SENSORS_LM87=m
|
||||
CONFIG_SENSORS_LM90=m
|
||||
CONFIG_SENSORS_LM92=m
|
||||
CONFIG_SENSORS_MAX1619=m
|
||||
CONFIG_SENSORS_PCF8591=m
|
||||
CONFIG_SENSORS_SMSC47B397=m
|
||||
CONFIG_SENSORS_W83781D=m
|
||||
CONFIG_SENSORS_W83791D=m
|
||||
CONFIG_SENSORS_W83792D=m
|
||||
CONFIG_SENSORS_W83793=m
|
||||
CONFIG_SENSORS_W83L785TS=m
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=m
|
||||
CONFIG_HID=m
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_RTC_CLASS=m
|
||||
CONFIG_RTC_DRV_AT91RM9200=m
|
||||
CONFIG_EXT2_FS=m
|
||||
CONFIG_EXT3_FS=m
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_UDF_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_NTFS_FS=m
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_SMB_FS=m
|
||||
CONFIG_CIFS=m
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_AMIGA_PARTITION=y
|
||||
CONFIG_NLS_DEFAULT="utf-8"
|
||||
CONFIG_NLS_CODEPAGE_437=m
|
||||
CONFIG_NLS_CODEPAGE_737=m
|
||||
CONFIG_NLS_CODEPAGE_775=m
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_CODEPAGE_852=m
|
||||
CONFIG_NLS_CODEPAGE_855=m
|
||||
CONFIG_NLS_CODEPAGE_857=m
|
||||
CONFIG_NLS_CODEPAGE_860=m
|
||||
CONFIG_NLS_CODEPAGE_861=m
|
||||
CONFIG_NLS_CODEPAGE_862=m
|
||||
CONFIG_NLS_CODEPAGE_863=m
|
||||
CONFIG_NLS_CODEPAGE_864=m
|
||||
CONFIG_NLS_CODEPAGE_865=m
|
||||
CONFIG_NLS_CODEPAGE_866=m
|
||||
CONFIG_NLS_CODEPAGE_869=m
|
||||
CONFIG_NLS_CODEPAGE_936=m
|
||||
CONFIG_NLS_CODEPAGE_950=m
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_CODEPAGE_949=m
|
||||
CONFIG_NLS_CODEPAGE_874=m
|
||||
CONFIG_NLS_ISO8859_8=m
|
||||
CONFIG_NLS_CODEPAGE_1250=m
|
||||
CONFIG_NLS_CODEPAGE_1251=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
CONFIG_NLS_ISO8859_2=m
|
||||
CONFIG_NLS_ISO8859_3=m
|
||||
CONFIG_NLS_ISO8859_4=m
|
||||
CONFIG_NLS_ISO8859_5=m
|
||||
CONFIG_NLS_ISO8859_6=m
|
||||
CONFIG_NLS_ISO8859_7=m
|
||||
CONFIG_NLS_ISO8859_9=m
|
||||
CONFIG_NLS_ISO8859_13=m
|
||||
CONFIG_NLS_ISO8859_14=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_KOI8_R=m
|
||||
CONFIG_NLS_KOI8_U=m
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_CRYPTO_NULL=m
|
||||
CONFIG_CRYPTO_TEST=m
|
||||
CONFIG_CRYPTO_LRW=m
|
||||
CONFIG_CRYPTO_PCBC=m
|
||||
CONFIG_CRYPTO_XCBC=m
|
||||
CONFIG_CRYPTO_MD4=m
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_SHA256=m
|
||||
CONFIG_CRYPTO_SHA512=m
|
||||
CONFIG_CRYPTO_TGR192=m
|
||||
CONFIG_CRYPTO_WP512=m
|
||||
CONFIG_CRYPTO_ANUBIS=m
|
||||
CONFIG_CRYPTO_BLOWFISH=m
|
||||
CONFIG_CRYPTO_CAMELLIA=m
|
||||
CONFIG_CRYPTO_CAST5=m
|
||||
CONFIG_CRYPTO_CAST6=m
|
||||
CONFIG_CRYPTO_FCRYPT=m
|
||||
CONFIG_CRYPTO_KHAZAD=m
|
||||
CONFIG_CRYPTO_SERPENT=m
|
||||
CONFIG_CRYPTO_TEA=m
|
||||
CONFIG_CRYPTO_TWOFISH=m
|
||||
CONFIG_LIBCRC32C=m
|
|
@ -1,137 +0,0 @@
|
|||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91RM9200DK=y
|
||||
CONFIG_MACH_YL9200=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=3
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ADS7846=y
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_DEBUG=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_DISPLAY_SUPPORT=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_M66592=y
|
||||
CONFIG_USB_FILE_STORAGE=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_DEBUG=y
|
||||
# CONFIG_MMC_BLOCK_BOUNCE is not set
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=1
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_JFFS2_RUBIN=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_SLUB_DEBUG_ON=y
|
||||
CONFIG_DEBUG_KOBJECT=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_LIST=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -238,7 +238,7 @@
|
|||
@ Slightly optimised to avoid incrementing the pointer twice
|
||||
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
|
||||
.if \rept == 2
|
||||
usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
|
||||
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
|
||||
.endif
|
||||
|
||||
add\cond \ptr, #\rept * \inc
|
||||
|
|
|
@ -13,6 +13,10 @@ typedef struct {
|
|||
|
||||
#ifdef CONFIG_CPU_HAS_ASID
|
||||
#define ASID(mm) ((mm)->context.id & 255)
|
||||
|
||||
/* init_mm.context.id_lock should be initialized. */
|
||||
#define INIT_MM_CONTEXT(name) \
|
||||
.context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
|
||||
#else
|
||||
#define ASID(mm) (0)
|
||||
#endif
|
||||
|
|
|
@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
|
|||
|
||||
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
|
||||
|
||||
/* we don't need complex calculations here as the pmd is folded into the pgd */
|
||||
#define pmd_addr_end(addr,end) (end)
|
||||
|
||||
/*
|
||||
* Conversion functions: convert a page and protection to a page entry,
|
||||
* and a page entry and page directory to the page they refer to.
|
||||
|
|
|
@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
|
|||
* A special ghost syscall is used for that (see traps.c).
|
||||
*/
|
||||
stmfd sp!, {r7, lr}
|
||||
ldr r7, =1f @ it's 20 bits
|
||||
ldr r7, 1f @ it's 20 bits
|
||||
swi __ARM_NR_cmpxchg
|
||||
ldmfd sp!, {r7, pc}
|
||||
1: .word __ARM_NR_cmpxchg
|
||||
|
|
|
@ -85,9 +85,11 @@ ENTRY(stext)
|
|||
mrc p15, 0, r9, c0, c0 @ get processor id
|
||||
bl __lookup_processor_type @ r5=procinfo r9=cpuid
|
||||
movs r10, r5 @ invalid processor (r5=0)?
|
||||
THUMB( it eq ) @ force fixup-able long branch encoding
|
||||
beq __error_p @ yes, error 'p'
|
||||
bl __lookup_machine_type @ r5=machinfo
|
||||
movs r8, r5 @ invalid machine (r5=0)?
|
||||
THUMB( it eq ) @ force fixup-able long branch encoding
|
||||
beq __error_a @ yes, error 'a'
|
||||
bl __vet_atags
|
||||
#ifdef CONFIG_SMP_ON_UP
|
||||
|
@ -262,6 +264,7 @@ __create_page_tables:
|
|||
mov pc, lr
|
||||
ENDPROC(__create_page_tables)
|
||||
.ltorg
|
||||
.align
|
||||
__enable_mmu_loc:
|
||||
.long .
|
||||
.long __enable_mmu
|
||||
|
@ -282,6 +285,7 @@ ENTRY(secondary_startup)
|
|||
bl __lookup_processor_type
|
||||
movs r10, r5 @ invalid processor?
|
||||
moveq r0, #'p' @ yes, error 'p'
|
||||
THUMB( it eq ) @ force fixup-able long branch encoding
|
||||
beq __error_p
|
||||
|
||||
/*
|
||||
|
@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
|
|||
b secondary_start_kernel
|
||||
ENDPROC(__secondary_switched)
|
||||
|
||||
.align
|
||||
|
||||
.type __secondary_data, %object
|
||||
__secondary_data:
|
||||
.long .
|
||||
|
@ -413,6 +419,7 @@ __fixup_smp_on_up:
|
|||
mov pc, lr
|
||||
ENDPROC(__fixup_smp)
|
||||
|
||||
.align
|
||||
1: .word .
|
||||
.word __smpalt_begin
|
||||
.word __smpalt_end
|
||||
|
|
|
@ -59,6 +59,8 @@ relocate_new_kernel:
|
|||
ldr r2,kexec_boot_atags
|
||||
mov pc,lr
|
||||
|
||||
.align
|
||||
|
||||
.globl kexec_start_address
|
||||
kexec_start_address:
|
||||
.long 0x0
|
||||
|
|
|
@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
|
|||
*/
|
||||
.L_found:
|
||||
#if __LINUX_ARM_ARCH__ >= 5
|
||||
rsb r1, r3, #0
|
||||
and r3, r3, r1
|
||||
rsb r0, r3, #0
|
||||
and r3, r3, r0
|
||||
clz r3, r3
|
||||
rsb r3, r3, #31
|
||||
add r0, r2, r3
|
||||
|
@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
|
|||
addeq r2, r2, #1
|
||||
mov r0, r2
|
||||
#endif
|
||||
cmp r1, r0 @ Clamp to maxbit
|
||||
movlo r0, r1
|
||||
mov pc, lr
|
||||
|
||||
|
|
|
@ -11,6 +11,6 @@
|
|||
#ifndef __ASM_ARCH_VMALLOC_H
|
||||
#define __ASM_ARCH_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif /* __ASM_ARCH_VMALLOC_H */
|
||||
|
|
|
@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
|
|||
|
||||
# AT91RM9200 board-specific support
|
||||
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
|
||||
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
|
||||
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
|
||||
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
|
||||
obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
|
||||
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
|
||||
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
|
||||
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
|
||||
|
|
|
@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
|
|||
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
||||
struct platform_device *atmel_default_console_device; /* the serial console device */
|
||||
|
||||
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* Fill in list of supported UARTs */
|
||||
for (i = 0; i < config->nr_tty; i++) {
|
||||
switch (config->tty_map[i]) {
|
||||
case 0:
|
||||
configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
at91_uarts[i] = &at91rm9200_uart0_device;
|
||||
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
|
||||
break;
|
||||
case 1:
|
||||
configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
|
||||
at91_uarts[i] = &at91rm9200_uart1_device;
|
||||
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
|
||||
break;
|
||||
case 2:
|
||||
configure_usart2_pins(0);
|
||||
at91_uarts[i] = &at91rm9200_uart2_device;
|
||||
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
|
||||
break;
|
||||
case 3:
|
||||
configure_usart3_pins(0);
|
||||
at91_uarts[i] = &at91rm9200_uart3_device;
|
||||
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
|
||||
break;
|
||||
case 4:
|
||||
configure_dbgu_pins();
|
||||
at91_uarts[i] = &at91rm9200_dbgu_device;
|
||||
at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
|
||||
break;
|
||||
default:
|
||||
continue;
|
||||
}
|
||||
at91_uarts[i]->id = i; /* update ID number to mapped ID */
|
||||
}
|
||||
|
||||
/* Set serial console device */
|
||||
if (config->console_tty < ATMEL_MAX_UART)
|
||||
atmel_default_console_device = at91_uarts[config->console_tty];
|
||||
if (!atmel_default_console_device)
|
||||
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
||||
}
|
||||
|
||||
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
|
|
|
@ -39,24 +39,24 @@
|
|||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata onearm_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 3,
|
||||
.tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init onearm_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&onearm_uart_config);
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
|
||||
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
|
||||
/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
||||
at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
|
||||
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
||||
| ATMEL_UART_RI);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init onearm_init_irq(void)
|
||||
|
|
|
@ -39,17 +39,6 @@
|
|||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata kafa_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init kafa_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
|
@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
|
|||
/* Set up the LEDs */
|
||||
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&kafa_uart_config);
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
|
||||
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init kafa_init_irq(void)
|
||||
|
|
|
@ -43,24 +43,21 @@
|
|||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata picotux200_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init picotux200_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91rm9200_initialize(18432000, AT91RM9200_BGA);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&picotux200_uart_config);
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
||||
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
|
||||
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
||||
| ATMEL_UART_RI);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init picotux200_init_irq(void)
|
||||
|
@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
|
|||
.ports = 1,
|
||||
};
|
||||
|
||||
// static struct at91_udc_data __initdata picotux200_udc_data = {
|
||||
// .vbus_pin = AT91_PIN_PD4,
|
||||
// .pullup_pin = AT91_PIN_PD5,
|
||||
// };
|
||||
|
||||
static struct at91_mmc_data __initdata picotux200_mmc_data = {
|
||||
.det_pin = AT91_PIN_PB27,
|
||||
.slot_b = 0,
|
||||
|
@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
|
|||
.wp_pin = AT91_PIN_PA17,
|
||||
};
|
||||
|
||||
// static struct spi_board_info picotux200_spi_devices[] = {
|
||||
// { /* DataFlash chip */
|
||||
// .modalias = "mtd_dataflash",
|
||||
// .chip_select = 0,
|
||||
// .max_speed_hz = 15 * 1000 * 1000,
|
||||
// },
|
||||
// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
// { /* DataFlash card */
|
||||
// .modalias = "mtd_dataflash",
|
||||
// .chip_select = 3,
|
||||
// .max_speed_hz = 15 * 1000 * 1000,
|
||||
// },
|
||||
// #endif
|
||||
// };
|
||||
|
||||
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
|
||||
#define PICOTUX200_FLASH_SIZE SZ_4M
|
||||
|
||||
|
@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
|
|||
at91_add_device_eth(&picotux200_eth_data);
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&picotux200_usbh_data);
|
||||
/* USB Device */
|
||||
// at91_add_device_udc(&picotux200_udc_data);
|
||||
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
|
||||
/* I2C */
|
||||
at91_add_device_i2c(NULL, 0);
|
||||
/* SPI */
|
||||
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
|
||||
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
/* DataFlash card */
|
||||
at91_set_gpio_output(AT91_PIN_PB22, 0);
|
||||
#else
|
||||
/* MMC */
|
||||
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
|
||||
at91_add_device_mmc(0, &picotux200_mmc_data);
|
||||
#endif
|
||||
/* NOR Flash */
|
||||
platform_device_register(&picotux200_flash);
|
||||
}
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91/board-dk.c
|
||||
* linux/arch/arm/mach-at91/board-rm9200dk.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
*
|
||||
|
@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
|
|||
// .vcc_pin = ... always powered
|
||||
};
|
||||
|
||||
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
static struct at91_mmc_data __initdata dk_mmc_data = {
|
||||
.slot_b = 0,
|
||||
.wire4 = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct spi_board_info dk_spi_devices[] = {
|
||||
{ /* DataFlash chip */
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91/board-ek.c
|
||||
* linux/arch/arm/mach-at91/board-rm9200ek.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
*
|
||||
|
@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
|
|||
.pullup_pin = AT91_PIN_PD5,
|
||||
};
|
||||
|
||||
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
static struct at91_mmc_data __initdata ek_mmc_data = {
|
||||
.det_pin = AT91_PIN_PB27,
|
||||
.slot_b = 0,
|
||||
.wire4 = 1,
|
||||
.wp_pin = AT91_PIN_PA17,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
{ /* DataFlash chip */
|
|
@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
|
|||
* EPSON S1D13806 FB (discontinued chip)
|
||||
* EPSON S1D13506 FB
|
||||
*/
|
||||
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
||||
#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
||||
#include <video/s1d13xxxfb.h>
|
||||
|
||||
|
||||
|
|
|
@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
|
|||
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
|
||||
extern void __init at91_set_serial_console(unsigned portnr);
|
||||
|
||||
struct at91_uart_config {
|
||||
unsigned short console_tty; /* tty number of serial console */
|
||||
unsigned short nr_tty; /* number of serial tty's */
|
||||
short tty_map[]; /* map UART to tty number */
|
||||
};
|
||||
extern struct platform_device *atmel_default_console_device;
|
||||
extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
|
||||
|
||||
struct atmel_uart_data {
|
||||
short use_dma_tx; /* use transmit DMA? */
|
||||
|
|
|
@ -22,4 +22,4 @@
|
|||
* 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
|
||||
* larger physical memory designs better.
|
||||
*/
|
||||
#define VMALLOC_END 0xf0000000
|
||||
#define VMALLOC_END 0xf0000000UL
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
|
|||
{
|
||||
int i;
|
||||
|
||||
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
|
||||
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
|
||||
"imprecise external abort");
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
|
||||
|
|
|
@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = {
|
|||
CLK(NULL, "uart1", &uart1_clk),
|
||||
CLK(NULL, "uart2", &uart2_clk),
|
||||
CLK("i2c_davinci.1", NULL, &i2c_clk),
|
||||
CLK("davinci-asp.0", NULL, &asp0_clk),
|
||||
CLK("davinci-asp.1", NULL, &asp1_clk),
|
||||
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
|
||||
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
|
||||
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
|
||||
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
|
||||
CLK("spi_davinci.0", NULL, &spi0_clk),
|
||||
|
@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = {
|
|||
};
|
||||
|
||||
static struct platform_device dm355_asp1_device = {
|
||||
.name = "davinci-asp",
|
||||
.name = "davinci-mcbsp",
|
||||
.id = 1,
|
||||
.num_resources = ARRAY_SIZE(dm355_asp1_resources),
|
||||
.resource = dm355_asp1_resources,
|
||||
|
|
|
@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = {
|
|||
CLK(NULL, "usb", &usb_clk),
|
||||
CLK("davinci_emac.1", NULL, &emac_clk),
|
||||
CLK("davinci_voicecodec", NULL, &voicecodec_clk),
|
||||
CLK("davinci-asp.0", NULL, &asp0_clk),
|
||||
CLK("davinci-mcbsp", NULL, &asp0_clk),
|
||||
CLK(NULL, "rto", &rto_clk),
|
||||
CLK(NULL, "mjcp", &mjcp_clk),
|
||||
CLK(NULL, NULL, NULL),
|
||||
|
@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = {
|
|||
};
|
||||
|
||||
static struct platform_device dm365_asp_device = {
|
||||
.name = "davinci-asp",
|
||||
.id = 0,
|
||||
.name = "davinci-mcbsp",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(dm365_asp_resources),
|
||||
.resource = dm365_asp_resources,
|
||||
};
|
||||
|
|
|
@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = {
|
|||
CLK("davinci_emac.1", NULL, &emac_clk),
|
||||
CLK("i2c_davinci.1", NULL, &i2c_clk),
|
||||
CLK("palm_bk3710", NULL, &ide_clk),
|
||||
CLK("davinci-asp", NULL, &asp_clk),
|
||||
CLK("davinci-mcbsp", NULL, &asp_clk),
|
||||
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
|
||||
CLK(NULL, "spi", &spi_clk),
|
||||
CLK(NULL, "gpio", &gpio_clk),
|
||||
|
@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = {
|
|||
};
|
||||
|
||||
static struct platform_device dm644x_asp_device = {
|
||||
.name = "davinci-asp",
|
||||
.name = "davinci-mcbsp",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(dm644x_asp_resources),
|
||||
.resource = dm644x_asp_resources,
|
||||
|
|
|
@ -7,4 +7,4 @@
|
|||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#define VMALLOC_END 0xdf000000
|
||||
#define VMALLOC_END 0xdf000000UL
|
||||
|
|
|
@ -7,4 +7,4 @@
|
|||
*/
|
||||
|
||||
|
||||
#define VMALLOC_END 0xf0000000
|
||||
#define VMALLOC_END 0xf0000000UL
|
||||
|
|
|
@ -5,6 +5,6 @@
|
|||
#ifndef __ARCH_ARM_VMALLOC_H
|
||||
#define __ARCH_ARM_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif
|
||||
|
|
|
@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
|
|||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
|
||||
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
|
||||
#define ADS7846_PENDOWN (GPIO_PORTD | 25)
|
||||
|
||||
static void ads7846_dev_init(void)
|
||||
|
@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
|
|||
.get_pendown_state = ads7846_get_pendown_state,
|
||||
.keep_vref_on = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
||||
static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
|
||||
[0] = {
|
||||
.modalias = "ads7846",
|
||||
|
@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
|
|||
.chipselect = eukrea_mbimx27_spi_cs,
|
||||
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
|
||||
{
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
|
|||
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
|
||||
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
|
||||
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
|
||||
static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
|
||||
|
||||
static APMU_CLK(nand, NAND, 0xbf, 100000000);
|
||||
|
||||
|
|
|
@ -16,7 +16,7 @@
|
|||
#ifndef __ASM_ARCH_MSM_VMALLOC_H
|
||||
#define __ASM_ARCH_MSM_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
|
|||
#define imx25_add_mxc_nand(pdata) \
|
||||
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
|
||||
|
||||
extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
|
||||
extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
|
||||
#define imx25_add_spi_imx(id, pdata) \
|
||||
imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
|
||||
imx_add_spi_imx(&imx25_cspi_data[id], pdata)
|
||||
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
|
||||
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
|
||||
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
|
||||
|
|
|
@ -14,6 +14,7 @@
|
|||
|
||||
#include <mach/common.h>
|
||||
#include <mach/iomux-mx3.h>
|
||||
#include <mach/spi.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
|
@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
|
|||
};
|
||||
|
||||
/* Platform Data for MXC CSPI */
|
||||
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
||||
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
|
||||
|
||||
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
|
||||
.chipselect = pcm037_spi1_cs,
|
||||
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
|
||||
};
|
||||
#endif
|
||||
|
||||
/* GPIO-keys input device */
|
||||
static struct gpio_keys_button pcm037_gpio_keys[] = {
|
||||
|
@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static int eet_init_devices(void)
|
||||
static int __init eet_init_devices(void)
|
||||
{
|
||||
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
|
||||
return 0;
|
||||
|
|
|
@ -16,4 +16,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd8000000
|
||||
#define VMALLOC_END 0xd8000000UL
|
||||
|
|
|
@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
|
|||
{
|
||||
.name = "wl1271",
|
||||
.mmc = 3,
|
||||
.caps = MMC_CAP_4_BIT_DATA,
|
||||
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
|
||||
.gpio_wp = -EINVAL,
|
||||
.gpio_cd = -EINVAL,
|
||||
.nonremovable = true,
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xf8000000
|
||||
#define VMALLOC_END 0xf8000000UL
|
||||
|
|
|
@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
|
|||
return 0;
|
||||
|
||||
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
|
||||
if (!dpll3_m2_ck)
|
||||
if (IS_ERR(dpll3_m2_ck))
|
||||
return -EINVAL;
|
||||
|
||||
rate = clk_get_rate(dpll3_m2_ck);
|
||||
|
|
|
@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
|
|||
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
|
||||
}
|
||||
|
||||
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
|
||||
{
|
||||
u32 tick_rate, cycles;
|
||||
|
||||
if (!seconds && !milliseconds)
|
||||
return;
|
||||
|
||||
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
|
||||
cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
|
||||
omap_dm_timer_stop(gptimer_wakeup);
|
||||
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
|
||||
|
||||
pr_info("PM: Resume timer in %u.%03u secs"
|
||||
" (%d ticks at %d ticks/sec.)\n",
|
||||
seconds, milliseconds, cycles, tick_rate);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
#include <linux/debugfs.h>
|
||||
#include <linux/seq_file.h>
|
||||
|
@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
|
|||
pwrdm->timer = t;
|
||||
}
|
||||
|
||||
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
|
||||
{
|
||||
u32 tick_rate, cycles;
|
||||
|
||||
if (!seconds && !milliseconds)
|
||||
return;
|
||||
|
||||
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
|
||||
cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
|
||||
omap_dm_timer_stop(gptimer_wakeup);
|
||||
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
|
||||
|
||||
pr_info("PM: Resume timer in %u.%03u secs"
|
||||
" (%d ticks at %d ticks/sec.)\n",
|
||||
seconds, milliseconds, cycles, tick_rate);
|
||||
}
|
||||
|
||||
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
|
||||
{
|
||||
struct seq_file *s = (struct seq_file *)user;
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
#include <linux/irq.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
@ -52,6 +53,19 @@
|
|||
#include <plat/powerdomain.h>
|
||||
#include <plat/clockdomain.h>
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
static suspend_state_t suspend_state = PM_SUSPEND_ON;
|
||||
static inline bool is_suspending(void)
|
||||
{
|
||||
return (suspend_state != PM_SUSPEND_ON);
|
||||
}
|
||||
#else
|
||||
static inline bool is_suspending(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void (*omap2_sram_idle)(void);
|
||||
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
|
||||
void __iomem *sdrc_power);
|
||||
|
@ -118,6 +132,11 @@ static void omap2_enter_full_retention(void)
|
|||
if (omap_irq_pending())
|
||||
goto no_sleep;
|
||||
|
||||
/* Block console output in case it is on one of the OMAP UARTs */
|
||||
if (!is_suspending())
|
||||
if (try_acquire_console_sem())
|
||||
goto no_sleep;
|
||||
|
||||
omap_uart_prepare_idle(0);
|
||||
omap_uart_prepare_idle(1);
|
||||
omap_uart_prepare_idle(2);
|
||||
|
@ -131,6 +150,9 @@ static void omap2_enter_full_retention(void)
|
|||
omap_uart_resume_idle(1);
|
||||
omap_uart_resume_idle(0);
|
||||
|
||||
if (!is_suspending())
|
||||
release_console_sem();
|
||||
|
||||
no_sleep:
|
||||
if (omap2_pm_debug) {
|
||||
unsigned long long tmp;
|
||||
|
@ -277,6 +299,12 @@ out:
|
|||
local_irq_enable();
|
||||
}
|
||||
|
||||
static int omap2_pm_begin(suspend_state_t state)
|
||||
{
|
||||
suspend_state = state;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int omap2_pm_prepare(void)
|
||||
{
|
||||
/* We cannot sleep in idle until we have resumed */
|
||||
|
@ -326,10 +354,17 @@ static void omap2_pm_finish(void)
|
|||
enable_hlt();
|
||||
}
|
||||
|
||||
static void omap2_pm_end(void)
|
||||
{
|
||||
suspend_state = PM_SUSPEND_ON;
|
||||
}
|
||||
|
||||
static struct platform_suspend_ops omap_pm_ops = {
|
||||
.begin = omap2_pm_begin,
|
||||
.prepare = omap2_pm_prepare,
|
||||
.enter = omap2_pm_enter,
|
||||
.finish = omap2_pm_finish,
|
||||
.end = omap2_pm_end,
|
||||
.valid = suspend_valid_only_mem,
|
||||
};
|
||||
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#include <plat/sram.h>
|
||||
#include <plat/clockdomain.h>
|
||||
|
@ -49,6 +50,19 @@
|
|||
#include "sdrc.h"
|
||||
#include "control.h"
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
static suspend_state_t suspend_state = PM_SUSPEND_ON;
|
||||
static inline bool is_suspending(void)
|
||||
{
|
||||
return (suspend_state != PM_SUSPEND_ON);
|
||||
}
|
||||
#else
|
||||
static inline bool is_suspending(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Scratchpad offsets */
|
||||
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
|
||||
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
|
||||
|
@ -385,6 +399,13 @@ void omap_sram_idle(void)
|
|||
omap3_enable_io_chain();
|
||||
}
|
||||
|
||||
/* Block console output in case it is on one of the OMAP UARTs */
|
||||
if (!is_suspending())
|
||||
if (per_next_state < PWRDM_POWER_ON ||
|
||||
core_next_state < PWRDM_POWER_ON)
|
||||
if (try_acquire_console_sem())
|
||||
goto console_still_active;
|
||||
|
||||
/* PER */
|
||||
if (per_next_state < PWRDM_POWER_ON) {
|
||||
omap_uart_prepare_idle(2);
|
||||
|
@ -463,6 +484,10 @@ void omap_sram_idle(void)
|
|||
omap_uart_resume_idle(3);
|
||||
}
|
||||
|
||||
if (!is_suspending())
|
||||
release_console_sem();
|
||||
|
||||
console_still_active:
|
||||
/* Disable IO-PAD and IO-CHAIN wakeup */
|
||||
if (omap3_has_io_wakeup() &&
|
||||
(per_next_state < PWRDM_POWER_ON ||
|
||||
|
@ -504,8 +529,6 @@ out:
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
static suspend_state_t suspend_state;
|
||||
|
||||
static int omap3_pm_prepare(void)
|
||||
{
|
||||
disable_hlt();
|
||||
|
|
|
@ -243,13 +243,14 @@
|
|||
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
|
||||
|
||||
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
|
||||
#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
|
||||
#define OMAP24XX_ST_GPIOS_MASK 2
|
||||
#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
|
||||
#define OMAP24XX_ST_GPT1_MASK 0
|
||||
#define OMAP24XX_ST_GPIOS_SHIFT 2
|
||||
#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
|
||||
#define OMAP24XX_ST_GPT1_SHIFT 0
|
||||
#define OMAP24XX_ST_GPT1_MASK (1 << 0)
|
||||
|
||||
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
|
||||
#define OMAP2430_ST_MDM_SHIFT (1 << 0)
|
||||
#define OMAP2430_ST_MDM_SHIFT 0
|
||||
#define OMAP2430_ST_MDM_MASK (1 << 0)
|
||||
|
||||
|
||||
/* 3430 register bits shared between CM & PRM registers */
|
||||
|
|
|
@ -27,6 +27,7 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#ifdef CONFIG_SERIAL_OMAP
|
||||
#include <plat/omap-serial.h>
|
||||
|
@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
|
|||
struct omap_uart_state *uart;
|
||||
|
||||
list_for_each_entry(uart, &uart_list, node) {
|
||||
if (num == uart->num) {
|
||||
if (num == uart->num && uart->can_sleep) {
|
||||
omap_uart_enable_clocks(uart);
|
||||
|
||||
/* Check for IO pad wakeup */
|
||||
|
@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
|
|||
|
||||
oh->dev_attr = uart;
|
||||
|
||||
acquire_console_sem(); /* in case the earlycon is on the UART */
|
||||
|
||||
/*
|
||||
* Because of early UART probing, UART did not get idled
|
||||
* on init. Now that omap_device is ready, ensure full idle
|
||||
|
@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
|
|||
omap_uart_block_sleep(uart);
|
||||
uart->timeout = DEFAULT_TIMEOUT;
|
||||
|
||||
release_console_sem();
|
||||
|
||||
if ((cpu_is_omap34xx() && uart->padconf) ||
|
||||
(uart->wk_en && uart->wk_mask)) {
|
||||
device_init_wakeup(&od->pdev.dev, true);
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
|
||||
* area for the same reason. ;)
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
|
|||
/******************************************************************************
|
||||
* NAND Flash
|
||||
******************************************************************************/
|
||||
#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
|
||||
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
|
||||
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
||||
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
|
||||
unsigned int ctrl)
|
||||
{
|
||||
|
|
|
@ -35,5 +35,6 @@ pen: ldr r7, [r6]
|
|||
*/
|
||||
b secondary_startup
|
||||
|
||||
.align
|
||||
1: .long .
|
||||
.long pen_release
|
||||
|
|
|
@ -7,4 +7,4 @@
|
|||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#define VMALLOC_END 0xdc000000
|
||||
#define VMALLOC_END 0xdc000000UL
|
||||
|
|
|
@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
|
|||
|
||||
/* Configures BT serial port GPIOs */
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
|
||||
|
||||
|
||||
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
|
||||
|
|
|
@ -16,7 +16,7 @@ config CPU_S3C2412
|
|||
config CPU_S3C2412_ONLY
|
||||
bool
|
||||
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
|
||||
!CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
|
||||
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
|
||||
!CPU_S3C2443 && CPU_S3C2412
|
||||
default y if CPU_S3C2412
|
||||
|
||||
|
|
|
@ -35,9 +35,12 @@ menu "S3C2416 Machines"
|
|||
config MACH_SMDK2416
|
||||
bool "SMDK2416"
|
||||
select CPU_S3C2416
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C2416_PM if PM
|
||||
help
|
||||
Say Y here if you are using an SMDK2416
|
||||
|
|
|
@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
|
|||
|
||||
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
|
||||
s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
|
||||
}
|
||||
|
||||
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
|
||||
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
static void s3c2416_irq_uart3_mask(unsigned int irqno)
|
||||
{
|
||||
|
|
|
@ -18,6 +18,7 @@ config CPU_S3C2440
|
|||
config CPU_S3C2442
|
||||
bool
|
||||
select CPU_ARM920T
|
||||
select S3C_GPIO_PULL_DOWN
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_GPIO
|
||||
select S3C2410_PM if PM
|
||||
|
@ -178,6 +179,9 @@ config MACH_MINI2440
|
|||
bool "MINI2440 development board"
|
||||
select CPU_S3C2440
|
||||
select EEPROM_AT24
|
||||
select NEW_LEDS
|
||||
select LEDS_CLASS
|
||||
select LEDS_TRIGGER
|
||||
select LEDS_TRIGGER_BACKLIGHT
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
|
|
|
@ -46,9 +46,6 @@ int __init s3c2440_init(void)
|
|||
{
|
||||
printk("S3C2440: Initialising architecture\n");
|
||||
|
||||
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
|
||||
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
|
||||
|
||||
/* change irq for watchdog */
|
||||
|
||||
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
|
||||
|
@ -58,3 +55,11 @@ int __init s3c2440_init(void)
|
|||
|
||||
return sysdev_register(&s3c2440_sysdev);
|
||||
}
|
||||
|
||||
void __init s3c2440_map_io(void)
|
||||
{
|
||||
s3c244x_map_io();
|
||||
|
||||
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
|
||||
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
|
||||
}
|
||||
|
|
|
@ -32,6 +32,7 @@
|
|||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
|
@ -43,6 +44,11 @@
|
|||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/s3c244x.h>
|
||||
|
||||
#include <plat/gpio-core.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/gpio-cfg-helpers.h>
|
||||
|
||||
/* S3C2442 extended clock support */
|
||||
|
||||
|
@ -163,3 +169,11 @@ int __init s3c2442_init(void)
|
|||
|
||||
return sysdev_register(&s3c2442_sysdev);
|
||||
}
|
||||
|
||||
void __init s3c2442_map_io(void)
|
||||
{
|
||||
s3c244x_map_io();
|
||||
|
||||
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
|
||||
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
|
||||
}
|
||||
|
|
|
@ -5,6 +5,7 @@
|
|||
config CPU_S3C2443
|
||||
bool
|
||||
depends on ARCH_S3C2410
|
||||
select CPU_ARM920T
|
||||
select S3C2443_DMA if S3C2410_DMA
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
|
|
|
@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
|
|||
|
||||
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
|
||||
s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
|
||||
}
|
||||
|
||||
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
|
||||
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
static void s3c2443_irq_uart3_mask(unsigned int irqno)
|
||||
{
|
||||
|
|
|
@ -45,7 +45,7 @@
|
|||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
|
||||
#define UCON S3C2410_UCON_DEFAULT
|
||||
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
|
||||
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
|
||||
|
||||
|
|
|
@ -46,7 +46,7 @@
|
|||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
|
||||
#define UCON S3C2410_UCON_DEFAULT
|
||||
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
|
||||
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
|
||||
|
||||
|
|
|
@ -13,6 +13,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/sysdev.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
|
|
@ -13,6 +13,7 @@
|
|||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/sysdev.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue