redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

serial: fsl_lpuart: calculate DMA burst

Browse source 
The DMA burst size must match the transmit FIFO depth in order
to make sure all character are transmitted. This patch calculates
DMA burst size by using FIFO depth rather than use the hardcoded
16 bytes. This is required since some UARTs (e.g. UART2 on Vybrid)
have a FIFO depth of 8 bytes.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Stefan Agner 2014-07-02 18:02:57 +02:00 committed by Greg Kroah-Hartman
parent 90abef91c5
commit ed9891bf09
1 changed files with 13 additions and 14 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
drivers/tty/serial/fsl_lpuart.c
View file

@ -117,8 +117,6 @@
#define UARTSFIFO_TXOF 0x02
#define UARTSFIFO_RXUF 0x01
#define DMA_MAXBURST 16
#define DMA_MAXBURST_MASK (DMA_MAXBURST - 1)
#define FSL_UART_RX_DMA_BUFFER_SIZE 64
#define DRIVER_NAME "fsl-lpuart"
@ -236,7 +234,7 @@ static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count)
dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus,
UART_XMIT_SIZE, DMA_TO_DEVICE);
sport->dma_tx_bytes = count & ~(DMA_MAXBURST_MASK);
sport->dma_tx_bytes = count & ~(sport->txfifo_size - 1);
tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail;
sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan,
tx_bus_addr, sport->dma_tx_bytes,
@ -265,7 +263,7 @@ static void lpuart_prepare_tx(struct lpuart_port *sport)
if (!count)
return;
if (count < DMA_MAXBURST)
if (count < sport->txfifo_size)
writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS,
sport->port.membase + UARTCR5);
else {
@ -595,15 +593,7 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
UARTCR2_RIE | UARTCR2_RE);
writeb(cr2, sport->port.membase + UARTCR2);
/* determine FIFO size and enable FIFO mode */
val = readb(sport->port.membase + UARTPFIFO);
sport->txfifo_size = 0x1 << (((val >> UARTPFIFO_TXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
sport->rxfifo_size = 0x1 << (((val >> UARTPFIFO_RXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
sport->port.membase + UARTPFIFO);
@ -648,7 +638,7 @@ static int lpuart_dma_tx_request(struct uart_port *port)
dma_buf = sport->port.state->xmit.buf;
dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_tx_sconfig.dst_maxburst = DMA_MAXBURST;
dma_tx_sconfig.dst_maxburst = sport->txfifo_size;
dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
ret = dmaengine_slave_config(tx_chan, &dma_tx_sconfig);
@ -761,7 +751,16 @@ static int lpuart_startup(struct uart_port *port)
unsigned long flags;
unsigned char temp;
/*whether use dma support by dma request results*/
/* determine FIFO size and enable FIFO mode */
temp = readb(sport->port.membase + UARTPFIFO);
sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) &
UARTPFIFO_FIFOSIZE_MASK) + 1);
/* Whether use dma support by dma request results */
if (lpuart_dma_tx_request(port) || lpuart_dma_rx_request(port)) {
sport->lpuart_dma_use = false;
} else {