[POWERPC] Optimize counting distinct entries in the relocation sections

When a module has relocation sections with tens of thousands of
entries, counting the distinct/unique entries only (i.e. no
duplicates) at load time can take tens of seconds and up to minutes.
The sore point is the count_relocs() function which is called as part
of the architecture specific module loading processing path:

	-> load_module()			generic
	   -> module_frob_arch_sections()	arch specific
	      -> get_plt_size()		32-bit
	      -> get_stubs_size()	64-bit
		 -> count_relocs()

Here count_relocs is being called to find out how many distinct
targets of R_PPC_REL24 relocations there are, since each distinct
target needs a PLT entry or a stub created for it.

The previous counting algorithm has O(n^2) complexity.  Basically two
solutions were proposed on the e-mail list: a hash based approach and
a sort based approach.

The hash based approach is the fastest (O(n)) but the has it needs
additional memory and for certain corner cases it could take lots of
memory due to the degeneration of the hash.  One such proposal was
submitted here:

http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html

The sort based approach is slower (O(n * log n + n)) but if the
sorting is done "in place" it doesn't need additional memory.
This has O(n + n * log n) complexity with no additional memory
requirements.

This commit implements the in-place sort option.

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Emil Medve 2007-11-14 03:24:04 +11:00 committed by Paul Mackerras
parent 1fe58a875e
commit eda09fbdcd
2 changed files with 126 additions and 30 deletions

View file

@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/cache.h>
#include <linux/bug.h>
#include <linux/sort.h>
#include "setup.h"
@ -54,22 +55,60 @@ void module_free(struct module *mod, void *module_region)
addend) */
static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
{
unsigned int i, j, ret = 0;
unsigned int i, r_info, r_addend, _count_relocs;
/* Sure, this is order(n^2), but it's usually short, and not
time critical */
for (i = 0; i < num; i++) {
for (j = 0; j < i; j++) {
/* If this addend appeared before, it's
already been counted */
if (ELF32_R_SYM(rela[i].r_info)
== ELF32_R_SYM(rela[j].r_info)
&& rela[i].r_addend == rela[j].r_addend)
break;
_count_relocs = 0;
r_info = 0;
r_addend = 0;
for (i = 0; i < num; i++)
/* Only count 24-bit relocs, others don't need stubs */
if (ELF32_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
(r_info != ELF32_R_SYM(rela[i].r_info) ||
r_addend != rela[i].r_addend)) {
_count_relocs++;
r_info = ELF32_R_SYM(rela[i].r_info);
r_addend = rela[i].r_addend;
}
if (j == i) ret++;
return _count_relocs;
}
static int relacmp(const void *_x, const void *_y)
{
const Elf32_Rela *x, *y;
y = (Elf32_Rela *)_x;
x = (Elf32_Rela *)_y;
/* Compare the entire r_info (as opposed to ELF32_R_SYM(r_info) only) to
* make the comparison cheaper/faster. It won't affect the sorting or
* the counting algorithms' performance
*/
if (x->r_info < y->r_info)
return -1;
else if (x->r_info > y->r_info)
return 1;
else if (x->r_addend < y->r_addend)
return -1;
else if (x->r_addend > y->r_addend)
return 1;
else
return 0;
}
static void relaswap(void *_x, void *_y, int size)
{
uint32_t *x, *y, tmp;
int i;
y = (uint32_t *)_x;
x = (uint32_t *)_y;
for (i = 0; i < sizeof(Elf32_Rela) / sizeof(uint32_t); i++) {
tmp = x[i];
x[i] = y[i];
y[i] = tmp;
}
return ret;
}
/* Get the potential trampolines size required of the init and
@ -100,6 +139,16 @@ static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
DEBUGP("Ptr: %p. Number: %u\n",
(void *)hdr + sechdrs[i].sh_offset,
sechdrs[i].sh_size / sizeof(Elf32_Rela));
/* Sort the relocation information based on a symbol and
* addend key. This is a stable O(n*log n) complexity
* alogrithm but it will reduce the complexity of
* count_relocs() to linear complexity O(n)
*/
sort((void *)hdr + sechdrs[i].sh_offset,
sechdrs[i].sh_size / sizeof(Elf32_Rela),
sizeof(Elf32_Rela), relacmp, relaswap);
ret += count_relocs((void *)hdr
+ sechdrs[i].sh_offset,
sechdrs[i].sh_size

View file

@ -24,6 +24,7 @@
#include <asm/module.h>
#include <asm/uaccess.h>
#include <asm/firmware.h>
#include <linux/sort.h>
#include "setup.h"
@ -81,25 +82,23 @@ static struct ppc64_stub_entry ppc64_stub =
different addend) */
static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
{
unsigned int i, j, ret = 0;
unsigned int i, r_info, r_addend, _count_relocs;
/* FIXME: Only count external ones --RR */
/* Sure, this is order(n^2), but it's usually short, and not
time critical */
for (i = 0; i < num; i++) {
_count_relocs = 0;
r_info = 0;
r_addend = 0;
for (i = 0; i < num; i++)
/* Only count 24-bit relocs, others don't need stubs */
if (ELF64_R_TYPE(rela[i].r_info) != R_PPC_REL24)
continue;
for (j = 0; j < i; j++) {
/* If this addend appeared before, it's
already been counted */
if (rela[i].r_info == rela[j].r_info
&& rela[i].r_addend == rela[j].r_addend)
break;
if (ELF64_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
(r_info != ELF64_R_SYM(rela[i].r_info) ||
r_addend != rela[i].r_addend)) {
_count_relocs++;
r_info = ELF64_R_SYM(rela[i].r_info);
r_addend = rela[i].r_addend;
}
if (j == i) ret++;
}
return ret;
return _count_relocs;
}
void *module_alloc(unsigned long size)
@ -118,6 +117,44 @@ void module_free(struct module *mod, void *module_region)
table entries. */
}
static int relacmp(const void *_x, const void *_y)
{
const Elf64_Rela *x, *y;
y = (Elf64_Rela *)_x;
x = (Elf64_Rela *)_y;
/* Compare the entire r_info (as opposed to ELF64_R_SYM(r_info) only) to
* make the comparison cheaper/faster. It won't affect the sorting or
* the counting algorithms' performance
*/
if (x->r_info < y->r_info)
return -1;
else if (x->r_info > y->r_info)
return 1;
else if (x->r_addend < y->r_addend)
return -1;
else if (x->r_addend > y->r_addend)
return 1;
else
return 0;
}
static void relaswap(void *_x, void *_y, int size)
{
uint64_t *x, *y, tmp;
int i;
y = (uint64_t *)_x;
x = (uint64_t *)_y;
for (i = 0; i < sizeof(Elf64_Rela) / sizeof(uint64_t); i++) {
tmp = x[i];
x[i] = y[i];
y[i] = tmp;
}
}
/* Get size of potential trampolines required. */
static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
const Elf64_Shdr *sechdrs)
@ -133,6 +170,16 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
DEBUGP("Ptr: %p. Number: %lu\n",
(void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size / sizeof(Elf64_Rela));
/* Sort the relocation information based on a symbol and
* addend key. This is a stable O(n*log n) complexity
* alogrithm but it will reduce the complexity of
* count_relocs() to linear complexity O(n)
*/
sort((void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size / sizeof(Elf64_Rela),
sizeof(Elf64_Rela), relacmp, relaswap);
relocs += count_relocs((void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size
/ sizeof(Elf64_Rela));
@ -343,7 +390,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* Simply set it */
*(u32 *)location = value;
break;
case R_PPC64_ADDR64:
/* Simply set it */
*(unsigned long *)location = value;
@ -399,7 +446,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
}
/* Only replace bits 2 through 26 */
*(uint32_t *)location
*(uint32_t *)location
= (*(uint32_t *)location & ~0x03fffffc)
| (value & 0x03fffffc);
break;