[TG3]: Fix supporting flowctrl code

This patch does three things.  It modifies tg3_setup_flow_control() to
use the administrator requested flow control settings if
autonegotiation is turned off.  It slightly modifies the
tg3_setup_fiber_mii_phy() function to account for this new use case.
And finally, it does the same for tg3_setup_copper_phy().

The copper modifications are more than a small multi-line change.  The
new code makes an attempt to avoid a link renegotiation if the link is
active at half duplex and the only difference between the current
advertised settings and requested advertised settings is the
flow control advertisements.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Matt Carlson 2007-12-20 20:10:01 -08:00 committed by David S. Miller
parent 5be73b471b
commit ef167e2703

View file

@ -1694,7 +1694,8 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
u32 old_rx_mode = tp->rx_mode;
u32 old_tx_mode = tp->tx_mode;
if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) {
if (tp->link_config.autoneg == AUTONEG_ENABLE &&
(tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)) {
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
new_tg3_flags = tg3_resolve_flowctrl_1000X(local_adv,
remote_adv);
@ -1975,10 +1976,44 @@ static int tg3_copper_is_advertising_all(struct tg3 *tp, u32 mask)
return 1;
}
static int tg3_adv_1000T_flowctrl_ok(struct tg3 *tp, u32 *lcladv, u32 *rmtadv)
{
u32 curadv, reqadv;
if (tg3_readphy(tp, MII_ADVERTISE, lcladv))
return 1;
curadv = *lcladv & (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
reqadv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
if (tp->link_config.active_duplex == DUPLEX_FULL) {
if (curadv != reqadv)
return 0;
if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)
tg3_readphy(tp, MII_LPA, rmtadv);
} else {
/* Reprogram the advertisement register, even if it
* does not affect the current link. If the link
* gets renegotiated in the future, we can save an
* additional renegotiation cycle by advertising
* it correctly in the first place.
*/
if (curadv != reqadv) {
*lcladv &= ~(ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
tg3_writephy(tp, MII_ADVERTISE, *lcladv | reqadv);
}
}
return 1;
}
static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
{
int current_link_up;
u32 bmsr, dummy;
u32 lcl_adv, rmt_adv;
u16 current_speed;
u8 current_duplex;
int i, err;
@ -2121,54 +2156,35 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
udelay(10);
}
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
if (bmcr & BMCR_ANENABLE) {
current_link_up = 1;
lcl_adv = 0;
rmt_adv = 0;
/* Force autoneg restart if we are exiting
* low power mode.
*/
if (!tg3_copper_is_advertising_all(tp,
tp->link_config.advertising))
current_link_up = 0;
} else {
current_link_up = 0;
tp->link_config.active_speed = current_speed;
tp->link_config.active_duplex = current_duplex;
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
if ((bmcr & BMCR_ANENABLE) &&
tg3_copper_is_advertising_all(tp,
tp->link_config.advertising)) {
if (tg3_adv_1000T_flowctrl_ok(tp, &lcl_adv,
&rmt_adv))
current_link_up = 1;
}
} else {
if (!(bmcr & BMCR_ANENABLE) &&
tp->link_config.speed == current_speed &&
tp->link_config.duplex == current_duplex) {
tp->link_config.duplex == current_duplex &&
tp->link_config.flowctrl ==
tp->link_config.active_flowctrl) {
current_link_up = 1;
} else {
current_link_up = 0;
}
}
tp->link_config.active_speed = current_speed;
tp->link_config.active_duplex = current_duplex;
if (current_link_up == 1 &&
tp->link_config.active_duplex == DUPLEX_FULL)
tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
}
if (current_link_up == 1 &&
(tp->link_config.active_duplex == DUPLEX_FULL) &&
(tp->link_config.autoneg == AUTONEG_ENABLE)) {
u32 local_adv, remote_adv;
if (tg3_readphy(tp, MII_ADVERTISE, &local_adv))
local_adv = 0;
if (tg3_readphy(tp, MII_LPA, &remote_adv))
remote_adv = 0;
/* If we are not advertising what has been requested,
* bring the link down and reconfigure.
*/
if (local_adv !=
tg3_advert_flowctrl_1000T(tp->link_config.flowctrl)) {
current_link_up = 0;
} else {
tg3_setup_flow_control(tp, local_adv, remote_adv);
}
}
relink:
if (current_link_up == 0 || tp->link_config.phy_is_low_power) {
u32 tmp;
@ -2981,6 +2997,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
u32 bmsr, bmcr;
u16 current_speed;
u8 current_duplex;
u32 local_adv, remote_adv;
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
tw32_f(MAC_MODE, tp->mac_mode);
@ -3014,7 +3031,8 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
err |= tg3_readphy(tp, MII_BMCR, &bmcr);
if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
(tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
(tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
tp->link_config.flowctrl == tp->link_config.active_flowctrl) {
/* do nothing, just check for link up at the end */
} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
u32 adv, new_adv;
@ -3096,8 +3114,11 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
else
current_duplex = DUPLEX_HALF;
local_adv = 0;
remote_adv = 0;
if (bmcr & BMCR_ANENABLE) {
u32 local_adv, remote_adv, common;
u32 common;
err |= tg3_readphy(tp, MII_ADVERTISE, &local_adv);
err |= tg3_readphy(tp, MII_LPA, &remote_adv);
@ -3108,15 +3129,15 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
current_duplex = DUPLEX_FULL;
else
current_duplex = DUPLEX_HALF;
tg3_setup_flow_control(tp, local_adv,
remote_adv);
}
else
current_link_up = 0;
}
}
if (current_link_up == 1 && current_duplex == DUPLEX_FULL)
tg3_setup_flow_control(tp, local_adv, remote_adv);
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
if (tp->link_config.active_duplex == DUPLEX_HALF)
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;