regulator: fixed: Convert to use GPIO descriptor only
As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. Intel MID portions tested by Andy. Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff Acked-by: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
1efef7cc72
commit
efdfeb079c
|
@ -18,6 +18,7 @@
|
|||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/gpio/driver.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/regulator/fixed.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
|
@ -175,6 +176,7 @@ static struct resource mx21ads_mmgpio_resource =
|
|||
DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
|
||||
|
||||
static struct bgpio_pdata mx21ads_mmgpio_pdata = {
|
||||
.label = "mx21ads-mmgpio",
|
||||
.base = MX21ADS_MMGPIO_BASE,
|
||||
.ngpio = 16,
|
||||
};
|
||||
|
@ -203,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
|
|||
static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
|
||||
.supply_name = "LCD",
|
||||
.microvolts = 3300000,
|
||||
.gpio = MX21ADS_IO_LCDON,
|
||||
.enable_high = 1,
|
||||
.init_data = &mx21ads_lcd_regulator_init_data,
|
||||
};
|
||||
|
@ -216,6 +217,14 @@ static struct platform_device mx21ads_lcd_regulator = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
|
||||
.table = {
|
||||
GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* Connected is a portrait Sharp-QVGA display
|
||||
* of type: LQ035Q7DB02
|
||||
|
@ -311,6 +320,7 @@ static void __init mx21ads_late_init(void)
|
|||
{
|
||||
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
|
||||
|
||||
gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table);
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
|
||||
mx21ads_cs8900_resources[1].start =
|
||||
|
|
|
@ -16,6 +16,7 @@
|
|||
#include <linux/gpio/driver.h>
|
||||
/* Needed for gpio_to_irq() */
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/map.h>
|
||||
|
@ -230,10 +231,17 @@ static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
|
|||
static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
|
||||
.supply_name = "LCD",
|
||||
.microvolts = 3300000,
|
||||
.gpio = MX27ADS_LCD_GPIO,
|
||||
.init_data = &mx27ads_lcd_regulator_init_data,
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
|
||||
.table = {
|
||||
GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static void __init mx27ads_regulator_init(void)
|
||||
{
|
||||
struct gpio_chip *vchip;
|
||||
|
@ -247,6 +255,8 @@ static void __init mx27ads_regulator_init(void)
|
|||
vchip->set = vgpio_set;
|
||||
gpiochip_add_data(vchip, NULL);
|
||||
|
||||
gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
|
||||
|
||||
platform_device_register_data(NULL, "reg-fixed-voltage",
|
||||
PLATFORM_DEVID_AUTO,
|
||||
&mx27ads_lcd_regulator_pdata,
|
||||
|
|
|
@ -15,6 +15,7 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/gpio-pxa.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/max8649.h>
|
||||
#include <linux/regulator/fixed.h>
|
||||
|
@ -148,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = {
|
|||
static struct fixed_voltage_config brownstone_v_5vp = {
|
||||
.supply_name = "v_5vp",
|
||||
.microvolts = 5000000,
|
||||
.gpio = GPIO_5V_ENABLE,
|
||||
.enable_high = 1,
|
||||
.enabled_at_boot = 1,
|
||||
.init_data = &brownstone_v_5vp_data,
|
||||
|
@ -162,6 +162,15 @@ static struct platform_device brownstone_v_5vp_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
|
||||
.table = {
|
||||
GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static struct max8925_platform_data brownstone_max8925_info = {
|
||||
.irq_base = MMP_NR_IRQS,
|
||||
};
|
||||
|
@ -217,6 +226,7 @@ static void __init brownstone_init(void)
|
|||
mmp2_add_isram(&mmp2_isram_platdata);
|
||||
|
||||
/* enable 5v regulator */
|
||||
gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
|
||||
platform_device_register(&brownstone_v_5vp_device);
|
||||
}
|
||||
|
||||
|
|
|
@ -300,7 +300,6 @@ static struct regulator_init_data modem_nreset_data = {
|
|||
static struct fixed_voltage_config modem_nreset_config = {
|
||||
.supply_name = "modem_nreset",
|
||||
.microvolts = 3300000,
|
||||
.gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
|
||||
.startup_delay = 25000,
|
||||
.enable_high = 1,
|
||||
.enabled_at_boot = 1,
|
||||
|
@ -315,6 +314,15 @@ static struct platform_device modem_nreset_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage",
|
||||
.table = {
|
||||
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
struct modem_private_data {
|
||||
struct regulator *regulator;
|
||||
};
|
||||
|
@ -568,7 +576,6 @@ static struct regulator_init_data keybrd_pwr_initdata = {
|
|||
static struct fixed_voltage_config keybrd_pwr_config = {
|
||||
.supply_name = "keybrd_pwr",
|
||||
.microvolts = 5000000,
|
||||
.gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
|
||||
.enable_high = 1,
|
||||
.init_data = &keybrd_pwr_initdata,
|
||||
};
|
||||
|
@ -602,6 +609,7 @@ static struct platform_device *ams_delta_devices[] __initdata = {
|
|||
};
|
||||
|
||||
static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
|
||||
&ams_delta_nreset_gpiod_table,
|
||||
&ams_delta_audio_gpio_table,
|
||||
&keybrd_pwr_gpio_table,
|
||||
&ams_delta_lcd_gpio_table,
|
||||
|
|
|
@ -10,6 +10,7 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/davinci_emac.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
@ -328,7 +329,6 @@ static struct regulator_init_data pandora_vmmc3 = {
|
|||
static struct fixed_voltage_config pandora_vwlan = {
|
||||
.supply_name = "vwlan",
|
||||
.microvolts = 1800000, /* 1.8V */
|
||||
.gpio = PANDORA_WIFI_NRESET_GPIO,
|
||||
.startup_delay = 50000, /* 50ms */
|
||||
.enable_high = 1,
|
||||
.init_data = &pandora_vmmc3,
|
||||
|
@ -342,6 +342,19 @@ static struct platform_device pandora_vwlan_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table pandora_vwlan_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.1",
|
||||
.table = {
|
||||
/*
|
||||
* As this is a low GPIO number it should be at the first
|
||||
* GPIO bank.
|
||||
*/
|
||||
GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static void pandora_wl1251_init_card(struct mmc_card *card)
|
||||
{
|
||||
/*
|
||||
|
@ -403,6 +416,7 @@ fail:
|
|||
static void __init omap3_pandora_legacy_init(void)
|
||||
{
|
||||
platform_device_register(&pandora_backlight);
|
||||
gpiod_add_lookup_table(&pandora_vwlan_gpiod_table);
|
||||
platform_device_register(&pandora_vwlan_device);
|
||||
omap_hsmmc_init(pandora_mmc3);
|
||||
omap_hsmmc_late_init(pandora_mmc3);
|
||||
|
|
|
@ -986,7 +986,6 @@ static struct fixed_voltage_config camera_dummy_config = {
|
|||
.supply_name = "camera_vdd",
|
||||
.input_supply = "vcc cam",
|
||||
.microvolts = 2800000,
|
||||
.gpio = -1,
|
||||
.enable_high = 0,
|
||||
.init_data = &camera_dummy_initdata,
|
||||
};
|
||||
|
|
|
@ -21,6 +21,7 @@
|
|||
#include <linux/regulator/fixed.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/leds-lp3944.h>
|
||||
#include <linux/platform_data/i2c-pxa.h>
|
||||
|
@ -698,31 +699,39 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
|
|||
|
||||
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
|
||||
/* camera */
|
||||
static struct regulator_consumer_supply camera_dummy_supplies[] = {
|
||||
static struct regulator_consumer_supply camera_regulator_supplies[] = {
|
||||
REGULATOR_SUPPLY("vdd", "0-005d"),
|
||||
};
|
||||
|
||||
static struct regulator_init_data camera_dummy_initdata = {
|
||||
.consumer_supplies = camera_dummy_supplies,
|
||||
.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
|
||||
static struct regulator_init_data camera_regulator_initdata = {
|
||||
.consumer_supplies = camera_regulator_supplies,
|
||||
.num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
|
||||
.constraints = {
|
||||
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
};
|
||||
|
||||
static struct fixed_voltage_config camera_dummy_config = {
|
||||
static struct fixed_voltage_config camera_regulator_config = {
|
||||
.supply_name = "camera_vdd",
|
||||
.microvolts = 2800000,
|
||||
.gpio = GPIO50_nCAM_EN,
|
||||
.enable_high = 0,
|
||||
.init_data = &camera_dummy_initdata,
|
||||
.init_data = &camera_regulator_initdata,
|
||||
};
|
||||
|
||||
static struct platform_device camera_supply_dummy_device = {
|
||||
static struct platform_device camera_supply_regulator_device = {
|
||||
.name = "reg-fixed-voltage",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.platform_data = &camera_dummy_config,
|
||||
.platform_data = &camera_regulator_config,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table camera_supply_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.1",
|
||||
.table = {
|
||||
GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
#endif
|
||||
|
@ -800,7 +809,7 @@ static struct i2c_board_info a780_i2c_board_info[] = {
|
|||
|
||||
static struct platform_device *a780_devices[] __initdata = {
|
||||
&a780_gpio_keys,
|
||||
&camera_supply_dummy_device,
|
||||
&camera_supply_regulator_device,
|
||||
};
|
||||
|
||||
static void __init a780_init(void)
|
||||
|
@ -823,6 +832,7 @@ static void __init a780_init(void)
|
|||
if (a780_camera_init() == 0)
|
||||
pxa_set_camera_info(&a780_pxacamera_platform_data);
|
||||
|
||||
gpiod_add_lookup_table(&camera_supply_gpiod_table);
|
||||
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
|
||||
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
|
||||
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
|
||||
|
@ -1098,7 +1108,7 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
|
|||
|
||||
static struct platform_device *a910_devices[] __initdata = {
|
||||
&a910_gpio_keys,
|
||||
&camera_supply_dummy_device,
|
||||
&camera_supply_regulator_device,
|
||||
};
|
||||
|
||||
static void __init a910_init(void)
|
||||
|
@ -1121,6 +1131,7 @@ static void __init a910_init(void)
|
|||
if (a910_camera_init() == 0)
|
||||
pxa_set_camera_info(&a910_pxacamera_platform_data);
|
||||
|
||||
gpiod_add_lookup_table(&camera_supply_gpiod_table);
|
||||
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
|
||||
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
|
||||
platform_add_devices(ARRAY_AND_SIZE(a910_devices));
|
||||
|
|
|
@ -18,6 +18,7 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/mfd/htc-pasic3.h>
|
||||
|
@ -696,7 +697,6 @@ static struct regulator_init_data vads7846_regulator = {
|
|||
static struct fixed_voltage_config vads7846 = {
|
||||
.supply_name = "vads7846",
|
||||
.microvolts = 3300000, /* probably */
|
||||
.gpio = -EINVAL,
|
||||
.startup_delay = 0,
|
||||
.init_data = &vads7846_regulator,
|
||||
};
|
||||
|
|
|
@ -886,7 +886,6 @@ static struct regulator_init_data audio_va_initdata = {
|
|||
static struct fixed_voltage_config audio_va_config = {
|
||||
.supply_name = "audio_va",
|
||||
.microvolts = 5000000,
|
||||
.gpio = GPIO_AUDIO_VA_ENABLE,
|
||||
.enable_high = 1,
|
||||
.enabled_at_boot = 0,
|
||||
.init_data = &audio_va_initdata,
|
||||
|
@ -900,6 +899,15 @@ static struct platform_device audio_va_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table audio_va_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.0",
|
||||
.table = {
|
||||
GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
/* Dummy supplies for Codec's VD/VLC */
|
||||
|
||||
static struct regulator_consumer_supply audio_dummy_supplies[] = {
|
||||
|
@ -918,7 +926,6 @@ static struct regulator_init_data audio_dummy_initdata = {
|
|||
static struct fixed_voltage_config audio_dummy_config = {
|
||||
.supply_name = "audio_vd",
|
||||
.microvolts = 3300000,
|
||||
.gpio = -1,
|
||||
.init_data = &audio_dummy_initdata,
|
||||
};
|
||||
|
||||
|
@ -1033,6 +1040,7 @@ static void __init raumfeld_audio_init(void)
|
|||
else
|
||||
gpio_direction_output(GPIO_MCLK_RESET, 1);
|
||||
|
||||
gpiod_add_lookup_table(&audio_va_gpiod_table);
|
||||
platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
|
||||
}
|
||||
|
||||
|
|
|
@ -17,6 +17,7 @@
|
|||
#include <linux/irq.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/mmc/host.h>
|
||||
|
@ -410,7 +411,6 @@ static struct regulator_init_data can_regulator_init_data = {
|
|||
static struct fixed_voltage_config can_regulator_pdata = {
|
||||
.supply_name = "CAN_SHDN",
|
||||
.microvolts = 3300000,
|
||||
.gpio = ZEUS_CAN_SHDN_GPIO,
|
||||
.init_data = &can_regulator_init_data,
|
||||
};
|
||||
|
||||
|
@ -422,6 +422,15 @@ static struct platform_device can_regulator_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table can_regulator_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.0",
|
||||
.table = {
|
||||
GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
|
||||
.oscillator_frequency = 16*1000*1000,
|
||||
};
|
||||
|
@ -538,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = {
|
|||
static struct fixed_voltage_config zeus_ohci_regulator_config = {
|
||||
.supply_name = "vbus2",
|
||||
.microvolts = 5000000, /* 5.0V */
|
||||
.gpio = ZEUS_USB2_PWREN_GPIO,
|
||||
.enable_high = 1,
|
||||
.startup_delay = 0,
|
||||
.init_data = &zeus_ohci_regulator_data,
|
||||
|
@ -552,6 +560,15 @@ static struct platform_device zeus_ohci_regulator_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.0",
|
||||
.table = {
|
||||
GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static struct pxaohci_platform_data zeus_ohci_platform_data = {
|
||||
.port_mode = PMM_NPS_MODE,
|
||||
/* Clear Power Control Polarity Low and set Power Sense
|
||||
|
@ -855,6 +872,8 @@ static void __init zeus_init(void)
|
|||
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
|
||||
|
||||
gpiod_add_lookup_table(&can_regulator_gpiod_table);
|
||||
gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table);
|
||||
platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
|
||||
|
||||
zeus_register_ohci();
|
||||
|
|
|
@ -352,7 +352,6 @@ static struct fixed_voltage_config wallvdd_pdata = {
|
|||
.supply_name = "WALLVDD",
|
||||
.microvolts = 5000000,
|
||||
.init_data = &wallvdd_data,
|
||||
.gpio = -EINVAL,
|
||||
};
|
||||
|
||||
static struct platform_device wallvdd_device = {
|
||||
|
|
|
@ -222,7 +222,6 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
|
|||
.supply_name = "B_PWR_5V",
|
||||
.microvolts = 5000000,
|
||||
.init_data = &smdk6410_b_pwr_5v_data,
|
||||
.gpio = -EINVAL,
|
||||
};
|
||||
|
||||
static struct platform_device smdk6410_b_pwr_5v = {
|
||||
|
|
|
@ -101,7 +101,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
|
|||
|
||||
assabet_bcr_gc = gc;
|
||||
|
||||
return gc->base;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -471,6 +471,14 @@ static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = {
|
|||
.enable_high = 1,
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = {
|
||||
.dev_id = "reg-fixed-voltage.0",
|
||||
.table = {
|
||||
GPIO_LOOKUP("assabet", 0, NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static void __init assabet_init(void)
|
||||
{
|
||||
/*
|
||||
|
@ -517,9 +525,11 @@ static void __init assabet_init(void)
|
|||
neponset_resources, ARRAY_SIZE(neponset_resources));
|
||||
#endif
|
||||
} else {
|
||||
gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
|
||||
sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
|
||||
assabet_cf_vcc_consumers,
|
||||
ARRAY_SIZE(assabet_cf_vcc_consumers));
|
||||
assabet_cf_vcc_consumers,
|
||||
ARRAY_SIZE(assabet_cf_vcc_consumers),
|
||||
true);
|
||||
|
||||
}
|
||||
|
||||
|
@ -802,7 +812,6 @@ fs_initcall(assabet_leds_init);
|
|||
|
||||
void __init assabet_init_irq(void)
|
||||
{
|
||||
unsigned int assabet_gpio_base;
|
||||
u32 def_val;
|
||||
|
||||
sa1100_init_irq();
|
||||
|
@ -817,9 +826,7 @@ void __init assabet_init_irq(void)
|
|||
*
|
||||
* This must precede any driver calls to BCR_set() or BCR_clear().
|
||||
*/
|
||||
assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val);
|
||||
|
||||
assabet_cf_vcc_pdata.gpio = assabet_gpio_base + 0;
|
||||
assabet_init_gpio((void *)&ASSABET_BCR, def_val);
|
||||
}
|
||||
|
||||
MACHINE_START(ASSABET, "Intel-Assabet")
|
||||
|
|
|
@ -348,7 +348,8 @@ void __init sa11x0_init_late(void)
|
|||
|
||||
int __init sa11x0_register_fixed_regulator(int n,
|
||||
struct fixed_voltage_config *cfg,
|
||||
struct regulator_consumer_supply *supplies, unsigned num_supplies)
|
||||
struct regulator_consumer_supply *supplies, unsigned num_supplies,
|
||||
bool uses_gpio)
|
||||
{
|
||||
struct regulator_init_data *id;
|
||||
|
||||
|
@ -356,7 +357,7 @@ int __init sa11x0_register_fixed_regulator(int n,
|
|||
if (!cfg->init_data)
|
||||
return -ENOMEM;
|
||||
|
||||
if (cfg->gpio < 0)
|
||||
if (!uses_gpio)
|
||||
id->constraints.always_on = 1;
|
||||
id->constraints.name = cfg->supply_name;
|
||||
id->constraints.min_uV = cfg->microvolts;
|
||||
|
|
|
@ -54,4 +54,5 @@ void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *);
|
|||
struct fixed_voltage_config;
|
||||
struct regulator_consumer_supply;
|
||||
int sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg,
|
||||
struct regulator_consumer_supply *supplies, unsigned num_supplies);
|
||||
struct regulator_consumer_supply *supplies, unsigned num_supplies,
|
||||
bool uses_gpio);
|
||||
|
|
|
@ -102,14 +102,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
|
|||
.supply_name = "cf-power",
|
||||
.microvolts = 3300000,
|
||||
.enabled_at_boot = 1,
|
||||
.gpio = -EINVAL,
|
||||
};
|
||||
|
||||
static void __init shannon_init(void)
|
||||
{
|
||||
sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
|
||||
shannon_cf_vcc_consumers,
|
||||
ARRAY_SIZE(shannon_cf_vcc_consumers));
|
||||
ARRAY_SIZE(shannon_cf_vcc_consumers),
|
||||
false);
|
||||
sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
|
||||
sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
|
||||
sa11x0_ppc_configure_mcp();
|
||||
|
|
|
@ -633,7 +633,6 @@ static struct regulator_init_data cn12_power_init_data = {
|
|||
static struct fixed_voltage_config cn12_power_info = {
|
||||
.supply_name = "CN12 SD/MMC Vdd",
|
||||
.microvolts = 3300000,
|
||||
.gpio = GPIO_PTB7,
|
||||
.enable_high = 1,
|
||||
.init_data = &cn12_power_init_data,
|
||||
};
|
||||
|
@ -646,6 +645,16 @@ static struct platform_device cn12_power = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table cn12_power_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.0",
|
||||
.table = {
|
||||
/* Offset 7 on port B */
|
||||
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
|
||||
/* SDHI0 */
|
||||
static struct regulator_consumer_supply sdhi0_power_consumers[] =
|
||||
|
@ -665,7 +674,6 @@ static struct regulator_init_data sdhi0_power_init_data = {
|
|||
static struct fixed_voltage_config sdhi0_power_info = {
|
||||
.supply_name = "CN11 SD/MMC Vdd",
|
||||
.microvolts = 3300000,
|
||||
.gpio = GPIO_PTB6,
|
||||
.enable_high = 1,
|
||||
.init_data = &sdhi0_power_init_data,
|
||||
};
|
||||
|
@ -678,6 +686,16 @@ static struct platform_device sdhi0_power = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
|
||||
.dev_id = "reg-fixed-voltage.1",
|
||||
.table = {
|
||||
/* Offset 6 on port B */
|
||||
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
|
||||
NULL, GPIO_ACTIVE_HIGH),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
static struct tmio_mmc_data sdhi0_info = {
|
||||
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
|
||||
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
|
||||
|
@ -1413,6 +1431,11 @@ static int __init arch_setup(void)
|
|||
DMA_MEMORY_EXCLUSIVE);
|
||||
platform_device_add(ecovec_ceu_devices[1]);
|
||||
|
||||
gpiod_add_lookup_table(&cn12_power_gpiod_table);
|
||||
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
|
||||
gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
|
||||
#endif
|
||||
|
||||
return platform_add_devices(ecovec_devices,
|
||||
ARRAY_SIZE(ecovec_devices));
|
||||
}
|
||||
|
|
|
@ -10,7 +10,7 @@
|
|||
* of the License.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/fixed.h>
|
||||
|
@ -43,7 +43,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = {
|
|||
* real voltage and signaling are still 1.8V.
|
||||
*/
|
||||
.microvolts = 2000000, /* 1.8V */
|
||||
.gpio = -EINVAL,
|
||||
.startup_delay = 250 * 1000, /* 250ms */
|
||||
.enable_high = 1, /* active high */
|
||||
.enabled_at_boot = 0, /* disabled at boot */
|
||||
|
@ -58,11 +57,23 @@ static struct platform_device bcm43xx_vmmc_regulator = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
|
||||
.dev_id = "reg-fixed-voltage.0",
|
||||
.table = {
|
||||
GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW),
|
||||
{}
|
||||
},
|
||||
};
|
||||
|
||||
static int __init bcm43xx_regulator_register(void)
|
||||
{
|
||||
struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
|
||||
struct gpiod_lookup *lookup = table->table;
|
||||
int ret;
|
||||
|
||||
bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
|
||||
lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
|
||||
gpiod_add_lookup_table(table);
|
||||
|
||||
ret = platform_device_register(&bcm43xx_vmmc_regulator);
|
||||
if (ret) {
|
||||
pr_err("%s: vmmc regulator register failed\n", __func__);
|
||||
|
|
|
@ -43,7 +43,6 @@ struct platform_device *regulator_register_always_on(int id, const char *name,
|
|||
}
|
||||
|
||||
data->cfg.microvolts = uv;
|
||||
data->cfg.gpio = -EINVAL;
|
||||
data->cfg.enabled_at_boot = 1;
|
||||
data->cfg.init_data = &data->init_data;
|
||||
|
||||
|
|
|
@ -24,10 +24,9 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/fixed.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
|
@ -78,10 +77,6 @@ of_get_fixed_voltage_config(struct device *dev,
|
|||
if (init_data->constraints.boot_on)
|
||||
config->enabled_at_boot = true;
|
||||
|
||||
config->gpio = of_get_named_gpio(np, "gpio", 0);
|
||||
if ((config->gpio < 0) && (config->gpio != -ENOENT))
|
||||
return ERR_PTR(config->gpio);
|
||||
|
||||
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
|
||||
|
||||
config->enable_high = of_property_read_bool(np, "enable-active-high");
|
||||
|
@ -102,6 +97,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
|
|||
struct fixed_voltage_config *config;
|
||||
struct fixed_voltage_data *drvdata;
|
||||
struct regulator_config cfg = { };
|
||||
enum gpiod_flags gflags;
|
||||
int ret;
|
||||
|
||||
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
|
||||
|
@ -150,25 +146,28 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
|
|||
|
||||
drvdata->desc.fixed_uV = config->microvolts;
|
||||
|
||||
if (gpio_is_valid(config->gpio)) {
|
||||
cfg.ena_gpio = config->gpio;
|
||||
if (pdev->dev.of_node)
|
||||
cfg.ena_gpio_initialized = true;
|
||||
}
|
||||
cfg.ena_gpio_invert = !config->enable_high;
|
||||
if (config->enabled_at_boot) {
|
||||
if (config->enable_high)
|
||||
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
|
||||
gflags = GPIOD_OUT_HIGH;
|
||||
else
|
||||
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
|
||||
gflags = GPIOD_OUT_LOW;
|
||||
} else {
|
||||
if (config->enable_high)
|
||||
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
|
||||
gflags = GPIOD_OUT_LOW;
|
||||
else
|
||||
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
|
||||
gflags = GPIOD_OUT_HIGH;
|
||||
}
|
||||
if (config->gpio_is_open_drain)
|
||||
cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
|
||||
if (config->gpio_is_open_drain) {
|
||||
if (gflags == GPIOD_OUT_HIGH)
|
||||
gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
|
||||
else
|
||||
gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
|
||||
}
|
||||
|
||||
cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, NULL, gflags);
|
||||
if (IS_ERR(cfg.ena_gpiod))
|
||||
return PTR_ERR(cfg.ena_gpiod);
|
||||
|
||||
cfg.dev = &pdev->dev;
|
||||
cfg.init_data = config->init_data;
|
||||
|
|
|
@ -24,8 +24,6 @@ struct regulator_init_data;
|
|||
* @supply_name: Name of the regulator supply
|
||||
* @input_supply: Name of the input regulator supply
|
||||
* @microvolts: Output voltage of regulator
|
||||
* @gpio: GPIO to use for enable control
|
||||
* set to -EINVAL if not used
|
||||
* @startup_delay: Start-up time in microseconds
|
||||
* @gpio_is_open_drain: Gpio pin is open drain or normal type.
|
||||
* If it is open drain type then HIGH will be set
|
||||
|
@ -49,7 +47,6 @@ struct fixed_voltage_config {
|
|||
const char *supply_name;
|
||||
const char *input_supply;
|
||||
int microvolts;
|
||||
int gpio;
|
||||
unsigned startup_delay;
|
||||
unsigned gpio_is_open_drain:1;
|
||||
unsigned enable_high:1;
|
||||
|
|
Loading…
Reference in a new issue