redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

fbdev changes for 3.13 

Nothing particularly stands out in this pull request. The biggest part of the
 changes are cleanups.
 
 Maybe one fix to mention is the "fb: reorder the lock sequence to fix potential
 dead lock" which hopefully fixes the fb locking issues reported by multiple
 persons.
 
 There are also a few commits that have changes to arch/arm/mach-at91 and
 arch/avr32, which have been acked by the maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSg2oCAAoJEPo9qoy8lh71vXsP/2AjkzOlcKBPutMG/W30QMHT
 tkKfr/RL8C3oXcimkE6ch3ksbFj2t5corxa/DLTdESdTpeFAgxj72pcdhN3X4+Xs
 7IokExM2W5s6p4pP66PTr2A5XhEyAHtEMp+2JbHPRzwZitblzBLZvuPUJljwJDpj
 Z9+sD00xv/MZrXDCsEN8k2xdJ3rFn6JgX267y1qajlsocZoseTF2ed94IN/YnIM7
 B2hra1B4E21FPYLzRDOJRmZa0YGomLTymezPnPg33hLBhnJU/aG4HLDHKUZWhduz
 /6UwACH63ja7I2z/8AZHQ1ACdbGheRtHbjwV9LLYlbaAvPmUqNTZ4b6UeQOb/EZ0
 3SPCYbwD6+RMhSx/j/XhySvw82RY0i1aTlTDyjgOggfrfdi4x1Wk54bUWp5l9O3D
 SX1vSpNLGSh4GKXRzJjf3jouG/LcOzlpDlVZXzgsPzkyirluUv6QdMTopJwFwIGx
 rFgtsbkvhEsFvaNhhVIqQXKfwZ69r42U5JC+fDM5u7VX0mqyJ1usUNGvNSeifcDg
 EwUAI6RGnOXCO6crj2BZYpRTdc61tnY9b4CGLHDCeQkEXokEsEJ7Mz+8YfSwFo7X
 wqh+dAPQaixeHtUFZ8GhHXeAsjoQRSBXygf3NSNmCeP3WsmuozbauuujSrrTHITp
 LOXFPhU9uxHu4mDd6wrq
 =59+j
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:
 "Nothing particularly stands out in this pull request.  The biggest
  part of the changes are cleanups.

  Maybe one fix to mention is the "fb: reorder the lock sequence to fix
  potential dead lock" which hopefully fixes the fb locking issues
  reported by multiple persons.

  There are also a few commits that have changes to arch/arm/mach-at91
  and arch/avr32, which have been acked by the maintainers"

* tag 'fbdev-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (143 commits)
  fb: reorder the lock sequence to fix potential dead lock
  fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare
  fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare
  omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  video: exynos_mipi_dsi: Unlock the mutex before returning
  video: da8xx-fb: remove unwanted define
  video: Remove unnecessary semicolons
  simplefb: use write-combined remapping
  simplefb: fix unmapping fb during destruction
  OMAPDSS: connector-dvi: fix releasing i2c_adapter
  OMAPDSS: DSI: fix perf measuring ifdefs
  framebuffer: Use fb_<level>
  framebuffer: Add fb_<level> convenience logging macros
  efifb: prevent null-deref when iterating dmi_list
  fbdev: fix error return code in metronomefb_probe()
  video: xilinxfb: Fix for "Use standard variable name convention"
  OMAPDSS: Fix de_level in videomode_to_omap_video_timings()
  video: xilinxfb: Simplify error path
  video: xilinxfb: Use devm_kzalloc instead of kzalloc
  video: xilinxfb: Use standard variable name convention
  ...
wifi-calibration
Linus Torvalds 2013-11-14 14:44:20 +09:00
parent 549608eadb 3a41c5dbe8
commit f0d55cc1a6
176 changed files with 3948 additions and 3104 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

75
Documentation/devicetree/bindings/video/atmel,lcdc.txt 100644
View File

@ -0,0 +1,75 @@
Atmel LCDC Framebuffer
-----------------------------------------------------
Required properties:
- compatible :
"atmel,at91sam9261-lcdc" ,
"atmel,at91sam9263-lcdc" ,
"atmel,at91sam9g10-lcdc" ,
"atmel,at91sam9g45-lcdc" ,
"atmel,at91sam9g45es-lcdc" ,
"atmel,at91sam9rl-lcdc" ,
"atmel,at32ap-lcdc"
- reg : Should contain 1 register ranges(address and length)
- interrupts : framebuffer controller interrupt
- display: a phandle pointing to the display node
Required nodes:
- display: a display node is required to initialize the lcd panel
This should be in the board dts.
- default-mode: a videomode within the display with timing parameters
as specified below.
Example:
fb0: fb@0x00500000 {
compatible = "atmel,at91sam9g45-lcdc";
reg = <0x00500000 0x1000>;
interrupts = <23 3 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
display = <&display0>;
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
};
Atmel LCDC Display
-----------------------------------------------------
Required properties (as per of_videomode_helper):
- atmel,dmacon: dma controler configuration
- atmel,lcdcon2: lcd controler configuration
- atmel,guard-time: lcd guard time (Delay in frame periods)
- bits-per-pixel: lcd panel bit-depth.
Optional properties (as per of_videomode_helper):
- atmel,lcdcon-backlight: enable backlight
- atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
Example:
display0: display {
bits-per-pixel = <32>;
atmel,lcdcon-backlight;
atmel,dmacon = <0x1>;
atmel,lcdcon2 = <0x80008002>;
atmel,guard-time = <9>;
atmel,lcd-wiring-mode = <1>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hback-porch = <1>;
hfront-porch = <1>;
vback-porch = <40>;
vfront-porch = <1>;
hsync-len = <45>;
vsync-len = <1>;
};
};
};

6
arch/arm/mach-at91/at91sam9261_devices.c
View File

@ -465,7 +465,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct atmel_lcdfb_pdata lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
@ -498,7 +498,7 @@ static struct platform_device at91_lcdc_device = {
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
{
if (!data) {
return;
@ -559,7 +559,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
#endif

6
arch/arm/mach-at91/at91sam9263_devices.c
View File

@ -832,7 +832,7 @@ void __init at91_add_device_can(struct at91_can_data *data) {}
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct atmel_lcdfb_pdata lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
@ -859,7 +859,7 @@ static struct platform_device at91_lcdc_device = {
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
{
if (!data)
return;
@ -891,7 +891,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
#endif

6
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -965,7 +965,7 @@ void __init at91_add_device_isi(struct isi_platform_data *data,
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct atmel_lcdfb_pdata lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
@ -991,7 +991,7 @@ static struct platform_device at91_lcdc_device = {
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
{
if (!data)
return;
@ -1037,7 +1037,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
#endif

6
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -498,7 +498,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct atmel_lcdfb_pdata lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
@ -525,7 +525,7 @@ static struct platform_device at91_lcdc_device = {
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
{
if (!data) {
return;
@ -557,7 +557,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
#endif

10
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -389,7 +389,7 @@ static struct fb_monspecs at91fb_default_stn_monspecs = {
| ATMEL_LCDC_IFWIDTH_4 \
| ATMEL_LCDC_SCANMOD_SINGLE)
static void at91_lcdc_stn_power_control(int on)
static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
/* backlight */
if (on) { /* power up */
@ -401,7 +401,7 @@ static void at91_lcdc_stn_power_control(int on)
}
}
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.default_bpp = 1,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
@ -445,7 +445,7 @@ static struct fb_monspecs at91fb_default_tft_monspecs = {
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
static void at91_lcdc_tft_power_control(int on)
static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
@ -453,7 +453,7 @@ static void at91_lcdc_tft_power_control(int on)
at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
}
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
@ -465,7 +465,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
#endif
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif

6
arch/arm/mach-at91/board-sam9263ek.c
View File

@ -275,13 +275,13 @@ static struct fb_monspecs at91fb_default_monspecs = {
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
static void at91_lcdc_power_control(int on)
static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
at91_set_gpio_value(AT91_PIN_PA30, on);
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
@ -292,7 +292,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
};
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif

4
arch/arm/mach-at91/board-sam9m10g45ek.c
View File

@ -284,7 +284,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 32,
.default_dmacon = ATMEL_LCDC_DMAEN,
@ -295,7 +295,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
};
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif

6
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -170,7 +170,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
static void at91_lcdc_power_control(int on)
static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
@ -179,7 +179,7 @@ static void at91_lcdc_power_control(int on)
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
@ -191,7 +191,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
};
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif

4
arch/arm/mach-at91/board.h
View File

@ -107,8 +107,8 @@ extern void __init at91_add_device_pwm(u32 mask);
extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
/* LCD Controller */
struct atmel_lcdfb_info;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
struct atmel_lcdfb_pdata;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);
/* AC97 */
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);

4
arch/arm/mach-mmp/ttc_dkb.c
View File

@ -191,7 +191,6 @@ static struct pxa3xx_nand_platform_data dkb_nand_info = {
#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */
/* link config */
#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/
#define CFG_GRA_SWAPRB(x) (x << 0) /* 1: rbswap enabled */
static struct mmp_mach_path_config dkb_disp_config[] = {
[0] = {
.name = "mmp-parallel",
@ -199,8 +198,7 @@ static struct mmp_mach_path_config dkb_disp_config[] = {
.output_type = PATH_OUT_PARALLEL,
.path_config = CFG_IOPADMODE(0x1)
| SCLK_SOURCE_SELECT(0x1),
.link_config = CFG_DUMBMODE(0x2)
| CFG_GRA_SWAPRB(0x1),
.link_config = CFG_DUMBMODE(0x2),
},
};

8
arch/avr32/boards/atngw100/evklcd10x.c
View File

@ -58,7 +58,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
.dclkmax = 28330000,
};
static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@ -96,7 +96,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
.dclkmax = 7000000,
};
static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@ -134,7 +134,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
.dclkmax = 6400000,
};
static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@ -145,7 +145,7 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
};
#endif
static void atevklcd10x_lcdc_power_control(int on)
static void atevklcd10x_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
gpio_set_value(GPIO_PIN_PB(15), on);
}

4
arch/avr32/boards/atngw100/mrmt.c
View File

@ -83,7 +83,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
.dclkmax = 9260000,
};
static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@ -126,7 +126,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
.dclkmax = 9260000,
};
static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT

2
arch/avr32/boards/atstk1000/atstk1000.h
View File

@ -10,7 +10,7 @@
#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
extern struct atmel_lcdfb_info atstk1000_lcdc_data;
extern struct atmel_lcdfb_pdata atstk1000_lcdc_data;
void atstk1000_setup_j2_leds(void);

2
arch/avr32/boards/atstk1000/setup.c
View File

@ -55,7 +55,7 @@ static struct fb_monspecs __initdata atstk1000_default_monspecs = {
.dclkmax = 30000000,
};
struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT

2
arch/avr32/boards/favr-32/setup.c
View File

@ -125,7 +125,7 @@ static struct fb_monspecs __initdata favr32_default_monspecs = {
.dclkmax = 28000000,
};
struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
struct atmel_lcdfb_pdata __initdata favr32_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT

2
arch/avr32/boards/hammerhead/setup.c
View File

@ -77,7 +77,7 @@ static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = {
.dclkmax = 10000000,
};
struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = {
struct atmel_lcdfb_pdata __initdata hammerhead_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT

2
arch/avr32/boards/merisc/display.c
View File

@ -45,7 +45,7 @@ static struct fb_monspecs merisc_fb_monspecs = {
.dclkmax = 30000000,
};
struct atmel_lcdfb_info merisc_lcdc_data = {
struct atmel_lcdfb_pdata merisc_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT

4
arch/avr32/boards/mimc200/setup.c
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
extern struct atmel_lcdfb_info mimc200_lcdc_data;
extern struct atmel_lcdfb_pdata mimc200_lcdc_data;
#include <linux/clk.h>
#include <linux/etherdevice.h>
@ -71,7 +71,7 @@ static struct fb_monspecs __initdata mimc200_default_monspecs = {
.dclkmax = 25200000,
};
struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
struct atmel_lcdfb_pdata __initdata mimc200_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT

8
arch/avr32/mach-at32ap/at32ap700x.c
View File

@ -1439,7 +1439,7 @@ fail:
* LCDC
* -------------------------------------------------------------------- */
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
static struct atmel_lcdfb_info atmel_lcdfb0_data;
static struct atmel_lcdfb_pdata atmel_lcdfb0_data;
static struct resource atmel_lcdfb0_resource[] = {
{
.start = 0xff000000,
@ -1467,12 +1467,12 @@ static struct clk atmel_lcdfb0_pixclk = {
};
struct platform_device *__init
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data,
unsigned long fbmem_start, unsigned long fbmem_len,
u64 pin_mask)
{
struct platform_device *pdev;
struct atmel_lcdfb_info *info;
struct atmel_lcdfb_pdata *info;
struct fb_monspecs *monspecs;
struct fb_videomode *modedb;
unsigned int modedb_size;
@ -1529,7 +1529,7 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
}
info = pdev->dev.platform_data;
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
memcpy(info, data, sizeof(struct atmel_lcdfb_pdata));
info->default_monspecs = monspecs;
pdev->name = "at32ap-lcdfb";

4
arch/avr32/mach-at32ap/include/mach/board.h
View File

@ -44,9 +44,9 @@ struct platform_device *
at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
void at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n);
struct atmel_lcdfb_info;
struct atmel_lcdfb_pdata;
struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data,
unsigned long fbmem_start, unsigned long fbmem_len,
u64 pin_mask);

3
drivers/auxdisplay/cfag12864bfb.c
View File

@ -102,8 +102,7 @@ static int cfag12864bfb_probe(struct platform_device *device)
platform_set_drvdata(device, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;

9
drivers/video/68328fb.c
View File

@ -478,11 +478,10 @@ int __init mc68x328fb_init(void)
return -EINVAL;
}
printk(KERN_INFO
"fb%d: %s frame buffer device\n", fb_info.node, fb_info.fix.id);
printk(KERN_INFO
"fb%d: %dx%dx%d at 0x%08lx\n", fb_info.node,
mc68x328fb_default.xres_virtual, mc68x328fb_default.yres_virtual,
fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
fb_info(&fb_info, "%dx%dx%d at 0x%08lx\n",
mc68x328fb_default.xres_virtual,
mc68x328fb_default.yres_virtual,
1 << mc68x328fb_default.bits_per_pixel, videomemory);
return 0;

2
drivers/video/Kconfig
View File

@ -996,6 +996,8 @@ config FB_ATMEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_MODE_HELPERS
select VIDEOMODE_HELPERS
help
This enables support for the AT91/AT32 LCD Controller.

4
drivers/video/amba-clcd.c
View File

@ -545,7 +545,7 @@ static int clcdfb_register(struct clcd_fb *fb)
static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct clcd_board *board = dev->dev.platform_data;
struct clcd_board *board = dev_get_platdata(&dev->dev);
struct clcd_fb *fb;
int ret;
@ -599,8 +599,6 @@ static int clcdfb_remove(struct amba_device *dev)
{
struct clcd_fb *fb = amba_get_drvdata(dev);
amba_set_drvdata(dev, NULL);
clcdfb_disable(fb);
unregister_framebuffer(&fb->fb);
if (fb->fb.cmap.len)

6
drivers/video/amifb.c
View File

@ -3742,13 +3742,12 @@ default_chipset:
if (err)
goto unset_drvdata;
printk("fb%d: %s frame buffer device, using %dK of video memory\n",
info->node, info->fix.id, info->fix.smem_len>>10);
fb_info(info, "%s frame buffer device, using %dK of video memory\n",
info->fix.id, info->fix.smem_len>>10);
return 0;
unset_drvdata:
dev_set_drvdata(&pdev->dev, NULL);
fb_dealloc_cmap(&info->cmap);
free_irq:
free_irq(IRQ_AMIGA_COPPER, info->par);
@ -3768,7 +3767,6 @@ static int __exit amifb_remove(struct platform_device *pdev)
struct fb_info *info = dev_get_drvdata(&pdev->dev);
unregister_framebuffer(info);
dev_set_drvdata(&pdev->dev, NULL);
fb_dealloc_cmap(&info->cmap);
free_irq(IRQ_AMIGA_COPPER, info->par);
custom.dmacon = DMAF_ALL | DMAF_MASTER;

8
drivers/video/arcfb.c
View File

@ -556,9 +556,8 @@ static int arcfb_probe(struct platform_device *dev)
goto err1;
}
}
printk(KERN_INFO
"fb%d: Arc frame buffer device, using %dK of video memory\n",
info->node, videomemorysize >> 10);
fb_info(info, "Arc frame buffer device, using %dK of video memory\n",
videomemorysize >> 10);
/* this inits the lcd but doesn't clear dirty pixels */
for (i = 0; i < num_cols * num_rows; i++) {
@ -572,8 +571,7 @@ static int arcfb_probe(struct platform_device *dev)
/* if we were told to splash the screen, we just clear it */
if (!nosplash) {
for (i = 0; i < num_cols * num_rows; i++) {
printk(KERN_INFO "fb%d: splashing lcd %d\n",
info->node, i);
fb_info(info, "splashing lcd %d\n", i);
ks108_set_start_line(par, i, 0);
ks108_clear_lcd(par, i);
}

49
drivers/video/arkfb.c
View File

@ -137,8 +137,7 @@ static void arkfb_settile(struct fb_info *info, struct fb_tilemap *map)
if ((map->width != 8) || (map->height != 16) ||
(map->depth != 1) || (map->length != 256)) {
printk(KERN_ERR "fb%d: unsupported font parameters: width %d, "
"height %d, depth %d, length %d\n", info->node,
fb_err(info, "unsupported font parameters: width %d, height %d, depth %d, length %d\n",
map->width, map->height, map->depth, map->length);
return;
}
@ -517,7 +516,7 @@ static void ark_set_pixclock(struct fb_info *info, u32 pixclock)
int rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock);
if (rv < 0) {
printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
fb_err(info, "cannot set requested pixclock, keeping old value\n");
return;
}
@ -584,7 +583,7 @@ static int arkfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
rv = svga_match_format (arkfb_formats, var, NULL);
if (rv < 0)
{
printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
fb_err(info, "unsupported mode requested\n");
return rv;
}
@ -604,14 +603,15 @@ static int arkfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
if (mem > info->screen_size)
{
printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
fb_err(info, "not enough framebuffer memory (%d kB requested, %d kB available)\n",
mem >> 10, (unsigned int) (info->screen_size >> 10));
return -EINVAL;
}
rv = svga_check_timings (&ark_timing_regs, var, info->node);
if (rv < 0)
{
printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
fb_err(info, "invalid timings requested\n");
return rv;
}
@ -693,7 +693,7 @@ static int arkfb_set_par(struct fb_info *info)
vga_wseq(par->state.vgabase, 0x18, regval);
/* Set the offset register */
pr_debug("fb%d: offset register : %d\n", info->node, offset_value);
fb_dbg(info, "offset register : %d\n", offset_value);
svga_wcrt_multi(par->state.vgabase, ark_offset_regs, offset_value);
/* fix for hi-res textmode */
@ -716,7 +716,7 @@ static int arkfb_set_par(struct fb_info *info)
/* Set mode-specific register values */
switch (mode) {
case 0:
pr_debug("fb%d: text mode\n", info->node);
fb_dbg(info, "text mode\n");
svga_set_textmode_vga_regs(par->state.vgabase);
vga_wseq(par->state.vgabase, 0x11, 0x10); /* basic VGA mode */
@ -725,7 +725,7 @@ static int arkfb_set_par(struct fb_info *info)
break;
case 1:
pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
fb_dbg(info, "4 bit pseudocolor\n");
vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
vga_wseq(par->state.vgabase, 0x11, 0x10); /* basic VGA mode */
@ -733,44 +733,44 @@ static int arkfb_set_par(struct fb_info *info)
dac_set_mode(par->dac, DAC_PSEUDO8_8);
break;
case 2:
pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
fb_dbg(info, "4 bit pseudocolor, planar\n");
vga_wseq(par->state.vgabase, 0x11, 0x10); /* basic VGA mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x00, 0x04); /* 8bit pixel path */
dac_set_mode(par->dac, DAC_PSEUDO8_8);
break;
case 3:
pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
fb_dbg(info, "8 bit pseudocolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x16); /* 8bpp accel mode */
if (info->var.pixclock > 20000) {
pr_debug("fb%d: not using multiplex\n", info->node);
fb_dbg(info, "not using multiplex\n");
svga_wcrt_mask(par->state.vgabase, 0x46, 0x00, 0x04); /* 8bit pixel path */
dac_set_mode(par->dac, DAC_PSEUDO8_8);
} else {
pr_debug("fb%d: using multiplex\n", info->node);
fb_dbg(info, "using multiplex\n");
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
dac_set_mode(par->dac, DAC_PSEUDO8_16);
hdiv = 2;
}
break;
case 4:
pr_debug("fb%d: 5/5/5 truecolor\n", info->node);
fb_dbg(info, "5/5/5 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x1A); /* 16bpp accel mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
dac_set_mode(par->dac, DAC_RGB1555_16);
break;
case 5:
pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
fb_dbg(info, "5/6/5 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x1A); /* 16bpp accel mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
dac_set_mode(par->dac, DAC_RGB0565_16);
break;
case 6:
pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
fb_dbg(info, "8/8/8 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x16); /* 8bpp accel mode ??? */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
@ -779,7 +779,7 @@ static int arkfb_set_par(struct fb_info *info)
hdiv = 2;
break;
case 7:
pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node);
fb_dbg(info, "8/8/8/8 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x1E); /* 32bpp accel mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
@ -787,7 +787,7 @@ static int arkfb_set_par(struct fb_info *info)
hmul = 2;
break;
default:
printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node);
fb_err(info, "unsupported mode - bug\n");
return -EINVAL;
}
@ -879,19 +879,19 @@ static int arkfb_blank(int blank_mode, struct fb_info *info)
switch (blank_mode) {
case FB_BLANK_UNBLANK:
pr_debug("fb%d: unblank\n", info->node);
fb_dbg(info, "unblank\n");
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
break;
case FB_BLANK_NORMAL:
pr_debug("fb%d: blank\n", info->node);
fb_dbg(info, "blank\n");
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
break;
case FB_BLANK_POWERDOWN:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_VSYNC_SUSPEND:
pr_debug("fb%d: sync down\n", info->node);
fb_dbg(info, "sync down\n");
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x00, 0x80);
break;
@ -1048,12 +1048,12 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
rc = register_framebuffer(info);
if (rc < 0) {
dev_err(info->device, "cannot register framebugger\n");
dev_err(info->device, "cannot register framebuffer\n");
goto err_reg_fb;
}
printk(KERN_INFO "fb%d: %s on %s, %d MB RAM\n", info->node, info->fix.id,
pci_name(dev), info->fix.smem_len >> 20);
fb_info(info, "%s on %s, %d MB RAM\n",
info->fix.id, pci_name(dev), info->fix.smem_len >> 20);
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
@ -1108,7 +1108,6 @@ static void ark_pci_remove(struct pci_dev *dev)
pci_release_regions(dev);
/* pci_disable_device(dev); */
pci_set_drvdata(dev, NULL);
framebuffer_release(info);
}
}

4
drivers/video/asiliantfb.c
View File

@ -527,8 +527,8 @@ static int init_asiliant(struct fb_info *p, unsigned long addr)
return err;
}
printk(KERN_INFO "fb%d: Asiliant 69000 frame buffer (%dK RAM detected)\n",
p->node, p->fix.smem_len / 1024);
fb_info(p, "Asiliant 69000 frame buffer (%dK RAM detected)\n",
p->fix.smem_len / 1024);
writeb(0xff, mmio_base + 0x78c);
chips_hw_init(p);

7
drivers/video/atafb.c
View File

@ -3246,11 +3246,8 @@ int __init atafb_init(void)
return -EINVAL;
}
// FIXME: mode needs setting!
//printk("fb%d: %s frame buffer device, using %dK of video memory\n",
// fb_info.node, fb_info.mode->name, screen_len>>10);
printk("fb%d: frame buffer device, using %dK of video memory\n",
fb_info.node, screen_len >> 10);
fb_info(&fb_info, "frame buffer device, using %dK of video memory\n",
screen_len >> 10);
/* TODO: This driver cannot be unloaded yet */
return 0;

344
drivers/video/atmel_lcdfb.c
View File

@ -20,12 +20,55 @@
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/platform_data/atmel.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
#include <mach/cpu.h>
#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
struct atmel_lcdfb_config {
bool have_alt_pixclock;
bool have_hozval;
bool have_intensity_bit;
};
/* LCD Controller info data structure, stored in device platform_data */
struct atmel_lcdfb_info {
spinlock_t lock;
struct fb_info *info;
void __iomem *mmio;
int irq_base;
struct work_struct task;
unsigned int smem_len;
struct platform_device *pdev;
struct clk *bus_clk;
struct clk *lcdc_clk;
struct backlight_device *backlight;
u8 bl_power;
u8 saved_lcdcon;
u32 pseudo_palette[16];
bool have_intensity_bit;
struct atmel_lcdfb_pdata pdata;
struct atmel_lcdfb_config *config;
};
struct atmel_lcdfb_power_ctrl_gpio {
int gpio;
int active_low;
struct list_head list;
};
#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
@ -34,12 +77,6 @@
#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
struct atmel_lcdfb_config {
bool have_alt_pixclock;
bool have_hozval;
bool have_intensity_bit;
};
static struct atmel_lcdfb_config at91sam9261_config = {
.have_hozval = true,
.have_intensity_bit = true,
@ -248,18 +285,27 @@ static void exit_backlight(struct atmel_lcdfb_info *sinfo)
static void init_contrast(struct atmel_lcdfb_info *sinfo)
{
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
/* contrast pwm can be 'inverted' */
if (sinfo->lcdcon_pol_negative)
if (pdata->lcdcon_pol_negative)
contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
/* have some default contrast/backlight settings */
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
if (sinfo->lcdcon_is_backlight)
if (pdata->lcdcon_is_backlight)
init_backlight(sinfo);
}
static inline void atmel_lcdfb_power_control(struct atmel_lcdfb_info *sinfo, int on)
{
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
if (pdata->atmel_lcdfb_power_control)
pdata->atmel_lcdfb_power_control(pdata, on);
}
static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
.type = FB_TYPE_PACKED_PIXELS,
@ -299,9 +345,11 @@ static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo,
static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
{
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
/* Turn off the LCD controller and the DMA controller */
lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
/* Wait for the LCDC core to become idle */
while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
@ -321,9 +369,11 @@ static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
{
lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon);
lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
(pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
| ATMEL_LCDC_PWR);
}
@ -424,6 +474,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
{
struct device *dev = info->device;
struct atmel_lcdfb_info *sinfo = info->par;
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
unsigned long clk_value_khz;
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
@ -510,7 +561,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
else
var->green.length = 6;
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
/* RGB:5X5 mode */
var->red.offset = var->green.length + 5;
var->blue.offset = 0;
@ -527,7 +578,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
var->transp.length = 8;
/* fall through */
case 24:
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
/* RGB:888 mode */
var->red.offset = 16;
var->blue.offset = 0;
@ -576,6 +627,7 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
static int atmel_lcdfb_set_par(struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->par;
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
unsigned long hozval_linesz;
unsigned long value;
unsigned long clk_value_khz;
@ -637,7 +689,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
/* Initialize control register 2 */
value = sinfo->default_lcdcon2;
value = pdata->default_lcdcon2;
if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
value |= ATMEL_LCDC_INVLINE_INVERTED;
@ -741,6 +793,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
unsigned int transp, struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->par;
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
unsigned int val;
u32 *pal;
int ret = 1;
@ -777,8 +830,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
*/
} else {
/* new style BGR:565 / RGB:565 */
if (sinfo->lcd_wiring_mode ==
ATMEL_LCDC_WIRING_RGB) {
if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
val = ((blue >> 11) & 0x001f);
val |= ((red >> 0) & 0xf800);
} else {
@ -912,16 +964,187 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
clk_disable_unprepare(sinfo->lcdc_clk);
}
#ifdef CONFIG_OF
static const struct of_device_id atmel_lcdfb_dt_ids[] = {
{ .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, },
{ .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, },
{ .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, },
{ .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, },
{ .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, },
{ .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, },
{ .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids);
static const char *atmel_lcdfb_wiring_modes[] = {
[ATMEL_LCDC_WIRING_BGR] = "BRG",
[ATMEL_LCDC_WIRING_RGB] = "RGB",
};
const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np)
{
const char *mode;
int err, i;
err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode);
if (err < 0)
return ATMEL_LCDC_WIRING_BGR;
for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++)
if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i]))
return i;
return -ENODEV;
}
static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on)
{
struct atmel_lcdfb_power_ctrl_gpio *og;
list_for_each_entry(og, &pdata->pwr_gpios, list)
gpio_set_value(og->gpio, on);
}
static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
{
struct fb_info *info = sinfo->info;
struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
struct fb_var_screeninfo *var = &info->var;
struct device *dev = &sinfo->pdev->dev;
struct device_node *np =dev->of_node;
struct device_node *display_np;
struct device_node *timings_np;
struct display_timings *timings;
enum of_gpio_flags flags;
struct atmel_lcdfb_power_ctrl_gpio *og;
bool is_gpio_power = false;
int ret = -ENOENT;
int i, gpio;
sinfo->config = (struct atmel_lcdfb_config*)
of_match_device(atmel_lcdfb_dt_ids, dev)->data;
display_np = of_parse_phandle(np, "display", 0);
if (!display_np) {
dev_err(dev, "failed to find display phandle\n");
return -ENOENT;
}
ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel);
if (ret < 0) {
dev_err(dev, "failed to get property bits-per-pixel\n");
goto put_display_node;
}
ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time);
if (ret < 0) {
dev_err(dev, "failed to get property atmel,guard-time\n");
goto put_display_node;
}
ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2);
if (ret < 0) {
dev_err(dev, "failed to get property atmel,lcdcon2\n");
goto put_display_node;
}
ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon);
if (ret < 0) {
dev_err(dev, "failed to get property bits-per-pixel\n");
goto put_display_node;
}
ret = -ENOMEM;
for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) {
gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio",
i, &flags);
if (gpio < 0)
continue;
og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL);
if (!og)
goto put_display_node;
og->gpio = gpio;
og->active_low = flags & OF_GPIO_ACTIVE_LOW;
is_gpio_power = true;
ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio");
if (ret) {
dev_err(dev, "request gpio %d failed\n", gpio);
goto put_display_node;
}
ret = gpio_direction_output(gpio, og->active_low);
if (ret) {
dev_err(dev, "set direction output gpio %d failed\n", gpio);
goto put_display_node;
}
}
if (is_gpio_power)
pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio;
ret = atmel_lcdfb_get_of_wiring_modes(display_np);
if (ret < 0) {
dev_err(dev, "invalid atmel,lcd-wiring-mode\n");
goto put_display_node;
}
pdata->lcd_wiring_mode = ret;
pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
timings = of_get_display_timings(display_np);
if (!timings) {
dev_err(dev, "failed to get display timings\n");
goto put_display_node;
}
timings_np = of_find_node_by_name(display_np, "display-timings");
if (!timings_np) {
dev_err(dev, "failed to find display-timings node\n");
goto put_display_node;
}
for (i = 0; i < of_get_child_count(timings_np); i++) {
struct videomode vm;
struct fb_videomode fb_vm;
ret = videomode_from_timings(timings, &vm, i);
if (ret < 0)
goto put_timings_node;
ret = fb_videomode_from_videomode(&vm, &fb_vm);
if (ret < 0)
goto put_timings_node;
fb_add_videomode(&fb_vm, &info->modelist);
}
return 0;
put_timings_node:
of_node_put(timings_np);
put_display_node:
of_node_put(display_np);
return ret;
}
#else
static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
{
return 0;
}
#endif
static int __init atmel_lcdfb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct fb_info *info;
struct atmel_lcdfb_info *sinfo;
struct atmel_lcdfb_info *pdata_sinfo;
struct fb_videomode fbmode;
struct atmel_lcdfb_pdata *pdata = NULL;
struct resource *regs = NULL;
struct resource *map = NULL;
struct fb_modelist *modelist;
int ret;
dev_dbg(dev, "%s BEGIN\n", __func__);
@ -934,26 +1157,35 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
}
sinfo = info->par;
sinfo->pdev = pdev;
sinfo->info = info;
if (dev->platform_data) {
pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
sinfo->default_bpp = pdata_sinfo->default_bpp;
sinfo->default_dmacon = pdata_sinfo->default_dmacon;
sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
sinfo->default_monspecs = pdata_sinfo->default_monspecs;
sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
sinfo->guard_time = pdata_sinfo->guard_time;
sinfo->smem_len = pdata_sinfo->smem_len;
sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
INIT_LIST_HEAD(&info->modelist);
if (pdev->dev.of_node) {
ret = atmel_lcdfb_of_init(sinfo);
if (ret)
goto free_info;
} else if (dev_get_platdata(dev)) {
struct fb_monspecs *monspecs;
int i;
pdata = dev_get_platdata(dev);
monspecs = pdata->default_monspecs;
sinfo->pdata = *pdata;
for (i = 0; i < monspecs->modedb_len; i++)
fb_add_videomode(&monspecs->modedb[i], &info->modelist);
sinfo->config = atmel_lcdfb_get_config(pdev);
info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs));
} else {
dev_err(dev, "cannot get default configuration\n");
goto free_info;
}
sinfo->info = info;
sinfo->pdev = pdev;
sinfo->config = atmel_lcdfb_get_config(pdev);
if (!sinfo->config)
goto free_info;
@ -962,7 +1194,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
info->pseudo_palette = sinfo->pseudo_palette;
info->fbops = &atmel_lcdfb_ops;
memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
info->fix = atmel_lcdfb_fix;
/* Enable LCDC Clocks */
@ -978,14 +1209,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
}
atmel_lcdfb_start_clock(sinfo);
ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
info->monspecs.modedb_len, info->monspecs.modedb,
sinfo->default_bpp);
if (!ret) {
dev_err(dev, "no suitable video mode found\n");
goto stop_clk;
}
modelist = list_first_entry(&info->modelist,
struct fb_modelist, list);
fb_videomode_to_var(&info->var, &modelist->mode);
atmel_lcdfb_check_var(&info->var, info);
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
@ -1069,18 +1297,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
goto unregister_irqs;
}
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
*/
atmel_lcdfb_check_var(&info->var, info);
ret = fb_set_var(info, &info->var);
if (ret) {
dev_warn(dev, "unable to set display parameters\n");
goto free_cmap;
}
dev_set_drvdata(dev, info);
/*
@ -1092,13 +1308,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
goto reset_drvdata;
}
/* add selected videomode to modelist */
fb_var_to_videomode(&fbmode, &info->var);
fb_add_videomode(&fbmode, &info->modelist);
/* Power up the LCDC screen */
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
atmel_lcdfb_power_control(sinfo, 1);
dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
@ -1107,7 +1318,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
reset_drvdata:
dev_set_drvdata(dev, NULL);
free_cmap:
fb_dealloc_cmap(&info->cmap);
unregister_irqs:
cancel_work_sync(&sinfo->task);
@ -1143,15 +1353,16 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct fb_info *info = dev_get_drvdata(dev);
struct atmel_lcdfb_info *sinfo;
struct atmel_lcdfb_pdata *pdata;
if (!info || !info->par)
return 0;
sinfo = info->par;
pdata = &sinfo->pdata;
cancel_work_sync(&sinfo->task);
exit_backlight(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
atmel_lcdfb_power_control(sinfo, 0);
unregister_framebuffer(info);
atmel_lcdfb_stop_clock(sinfo);
clk_put(sinfo->lcdc_clk);
@ -1167,7 +1378,6 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
atmel_lcdfb_free_video_memory(sinfo);
}
dev_set_drvdata(dev, NULL);
framebuffer_release(info);
return 0;
@ -1188,9 +1398,7 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
atmel_lcdfb_power_control(sinfo, 0);
atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
@ -1204,8 +1412,7 @@ static int atmel_lcdfb_resume(struct platform_device *pdev)
atmel_lcdfb_start_clock(sinfo);
atmel_lcdfb_start(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
atmel_lcdfb_power_control(sinfo, 1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
/* Enable FIFO & DMA errors */
@ -1228,6 +1435,7 @@ static struct platform_driver atmel_lcdfb_driver = {
.driver = {
.name = "atmel_lcdfb",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(atmel_lcdfb_dt_ids),
},
};

8
drivers/video/aty/aty128fb.c
View File

@ -413,7 +413,6 @@ struct aty128fb_par {
int blitter_may_be_busy;
int fifo_slots; /* free slots in FIFO (64 max) */
int pm_reg;
int crt_on, lcd_on;
struct pci_dev *pdev;
struct fb_info *next;
@ -2016,7 +2015,6 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
aty128_init_engine(par);
par->pm_reg = pdev->pm_cap;
par->pdev = pdev;
par->asleep = 0;
par->lock_blank = 0;
@ -2029,8 +2027,8 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
if (register_framebuffer(info) < 0)
return 0;
printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
info->node, info->fix.id, video_card);
fb_info(info, "%s frame buffer device on %s\n",
info->fix.id, video_card);
return 1; /* success! */
}
@ -2397,7 +2395,7 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
u32 pmgt;
struct pci_dev *pdev = par->pdev;
if (!par->pm_reg)
if (!par->pdev->pm_cap)
return;
/* Set the chip into the appropriate suspend mode (we use D2,

1
drivers/video/aty/atyfb_base.c
View File

@ -1848,7 +1848,6 @@ static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
return aty_waitforvblank(par, crtc);
}
break;
#if defined(DEBUG) && defined(CONFIG_FB_ATY_CT)
case ATYIO_CLKR:

5
drivers/video/aty/radeon_base.c
View File

@ -819,11 +819,6 @@ static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *in
if (v.xres_virtual < v.xres)
v.xres = v.xres_virtual;
if (v.xoffset < 0)
v.xoffset = 0;
if (v.yoffset < 0)
v.yoffset = 0;
if (v.xoffset > v.xres_virtual - v.xres)
v.xoffset = v.xres_virtual - v.xres - 1;

22
drivers/video/aty/radeon_pm.c
View File

@ -1427,6 +1427,8 @@ static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo)
mdelay( 15);
}
#if defined(CONFIG_PM)
#if defined(CONFIG_X86) || defined(CONFIG_PPC_PMAC)
static void radeon_pm_reset_pad_ctlr_strength(struct radeonfb_info *rinfo)
{
u32 tmp, tmp2;
@ -1939,9 +1941,10 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo)
*/
radeon_pm_m10_enable_lvds_spread_spectrum(rinfo);
}
#endif
#ifdef CONFIG_PPC_OF
#ifdef CONFIG_PPC_PMAC
static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo)
{
OUTREG(MC_CNTL, rinfo->save_regs[46]);
@ -2202,6 +2205,8 @@ static void radeon_reinitialize_M9P(struct radeonfb_info *rinfo)
radeon_pm_restore_pixel_pll(rinfo);
radeon_pm_m10_enable_lvds_spread_spectrum(rinfo);
}
#endif
#endif
#if 0 /* Not ready yet */
static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
@ -2515,13 +2520,13 @@ static void radeonfb_whack_power_state(struct radeonfb_info *rinfo, pci_power_t
for (;;) {
pci_read_config_word(rinfo->pdev,
rinfo->pm_reg+PCI_PM_CTRL,
rinfo->pdev->pm_cap + PCI_PM_CTRL,
&pwr_cmd);
if (pwr_cmd & 2)
if (pwr_cmd & state)
break;
pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2;
pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | state;
pci_write_config_word(rinfo->pdev,
rinfo->pm_reg+PCI_PM_CTRL,
rinfo->pdev->pm_cap + PCI_PM_CTRL,
pwr_cmd);
msleep(500);
}
@ -2532,7 +2537,7 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
{
u32 tmp;
if (!rinfo->pm_reg)
if (!rinfo->pdev->pm_cap)
return;
/* Set the chip into appropriate suspend mode (we use D2,
@ -2804,9 +2809,6 @@ static void radeonfb_early_resume(void *data)
void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
{
/* Find PM registers in config space if any*/
rinfo->pm_reg = rinfo->pdev->pm_cap;
/* Enable/Disable dynamic clocks: TODO add sysfs access */
if (rinfo->family == CHIP_FAMILY_RS480)
rinfo->dynclk = -1;
@ -2830,7 +2832,7 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis
* reason. --BenH
*/
if (machine_is(powermac) && rinfo->of_node) {
if (rinfo->is_mobility && rinfo->pm_reg &&
if (rinfo->is_mobility && rinfo->pdev->pm_cap &&
rinfo->family <= CHIP_FAMILY_RV250)
rinfo->pm_mode |= radeon_pm_d2;

1
drivers/video/aty/radeonfb.h
View File

@ -342,7 +342,6 @@ struct radeonfb_info {
int mtrr_hdl;
int pm_reg;
u32 save_regs[100];
int asleep;
int lock_blank;

16
drivers/video/au1100fb.c
View File

@ -564,7 +564,7 @@ int au1100fb_drv_remove(struct platform_device *dev)
if (!dev)
return -ENODEV;
fbdev = (struct au1100fb_device *) platform_get_drvdata(dev);
fbdev = platform_get_drvdata(dev);
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
@ -636,19 +636,7 @@ static struct platform_driver au1100fb_driver = {
.suspend = au1100fb_drv_suspend,
.resume = au1100fb_drv_resume,
};
static int __init au1100fb_load(void)
{
return platform_driver_register(&au1100fb_driver);
}
static void __exit au1100fb_unload(void)
{
platform_driver_unregister(&au1100fb_driver);
}
module_init(au1100fb_load);
module_exit(au1100fb_unload);
module_platform_driver(au1100fb_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

16
drivers/video/au1200fb.c
View File

@ -1853,21 +1853,7 @@ static struct platform_driver au1200fb_driver = {
.probe = au1200fb_drv_probe,
.remove = au1200fb_drv_remove,
};
/*-------------------------------------------------------------------------*/
static int __init au1200fb_init(void)
{
return platform_driver_register(&au1200fb_driver);
}
static void __exit au1200fb_cleanup(void)
{
platform_driver_unregister(&au1200fb_driver);
}
module_init(au1200fb_init);
module_exit(au1200fb_cleanup);
module_platform_driver(au1200fb_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

1
drivers/video/backlight/l4f00242t03.c
View File

@ -244,7 +244,6 @@ static int l4f00242t03_remove(struct spi_device *spi)
l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN);
lcd_device_unregister(priv->ld);
spi_set_drvdata(spi, NULL);
return 0;
}

6
drivers/video/backlight/tosa_lcd.c
View File

@ -198,7 +198,7 @@ static int tosa_lcd_probe(struct spi_device *spi)
ret = devm_gpio_request_one(&spi->dev, TOSA_GPIO_TG_ON,
GPIOF_OUT_INIT_LOW, "tg #pwr");
if (ret < 0)
goto err_gpio_tg;
return ret;
mdelay(60);
@ -219,8 +219,6 @@ static int tosa_lcd_probe(struct spi_device *spi)
err_register:
tosa_lcd_tg_off(data);
err_gpio_tg:
spi_set_drvdata(spi, NULL);
return ret;
}
@ -235,8 +233,6 @@ static int tosa_lcd_remove(struct spi_device *spi)
tosa_lcd_tg_off(data);
spi_set_drvdata(spi, NULL);
return 0;
}

14
drivers/video/bf54x-lq043fb.c
View File

@ -761,19 +761,7 @@ static struct platform_driver bfin_bf54x_driver = {
.owner = THIS_MODULE,
},
};
static int __init bfin_bf54x_driver_init(void)
{
return platform_driver_register(&bfin_bf54x_driver);
}
static void __exit bfin_bf54x_driver_cleanup(void)
{
platform_driver_unregister(&bfin_bf54x_driver);
}
module_platform_driver(bfin_bf54x_driver);
MODULE_DESCRIPTION("Blackfin BF54x TFT LCD Driver");
MODULE_LICENSE("GPL");
module_init(bfin_bf54x_driver_init);
module_exit(bfin_bf54x_driver_cleanup);

14
drivers/video/bfin-t350mcqb-fb.c
View File

@ -664,19 +664,7 @@ static struct platform_driver bfin_t350mcqb_driver = {
.owner = THIS_MODULE,
},
};
static int __init bfin_t350mcqb_driver_init(void)
{
return platform_driver_register(&bfin_t350mcqb_driver);
}
static void __exit bfin_t350mcqb_driver_cleanup(void)
{
platform_driver_unregister(&bfin_t350mcqb_driver);
}
module_platform_driver(bfin_t350mcqb_driver);
MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
MODULE_LICENSE("GPL");
module_init(bfin_t350mcqb_driver_init);
module_exit(bfin_t350mcqb_driver_cleanup);

19
drivers/video/broadsheetfb.c
View File

@ -1167,9 +1167,8 @@ static int broadsheetfb_probe(struct platform_device *dev)
if (retval < 0)
goto err_unreg_fb;
printk(KERN_INFO
"fb%d: Broadsheet frame buffer, using %dK of video memory\n",
info->node, videomemorysize >> 10);
fb_info(info, "Broadsheet frame buffer, using %dK of video memory\n",
videomemorysize >> 10);
return 0;
@ -1217,19 +1216,7 @@ static struct platform_driver broadsheetfb_driver = {
.name = "broadsheetfb",
},
};
static int __init broadsheetfb_init(void)
{
return platform_driver_register(&broadsheetfb_driver);
}
static void __exit broadsheetfb_exit(void)
{
platform_driver_unregister(&broadsheetfb_driver);
}
module_init(broadsheetfb_init);
module_exit(broadsheetfb_exit);
module_platform_driver(broadsheetfb_driver);
MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
MODULE_AUTHOR("Jaya Kumar");

2
drivers/video/bw2.c
View File

@ -363,8 +363,6 @@ static int bw2_remove(struct platform_device *op)
framebuffer_release(info);
dev_set_drvdata(&op->dev, NULL);
return 0;
}

4
drivers/video/carminefb.c
View File

@ -585,8 +585,7 @@ static int alloc_carmine_fb(void __iomem *regs, void __iomem *smem_base,
if (ret < 0)
goto err_dealloc_cmap;
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
*rinfo = info;
return 0;
@ -746,7 +745,6 @@ static void carminefb_remove(struct pci_dev *dev)
iounmap(hw->v_regs);
release_mem_region(fix.mmio_start, fix.mmio_len);
pci_set_drvdata(dev, NULL);
pci_disable_device(dev);
kfree(hw);
}

2
drivers/video/cfbimgblt.c
View File

@ -181,7 +181,7 @@ static inline void slow_imageblit(const struct fb_image *image, struct fb_info *
}
shift += bpp;
shift &= (32 - 1);
if (!l) { l = 8; s++; };
if (!l) { l = 8; s++; }
}
/* write trailing bits */

6
drivers/video/cg14.c
View File

@ -330,7 +330,7 @@ static int cg14_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
default:
ret = -ENOSYS;
break;
};
}
if (!ret) {
sbus_writeb(cur_mode, &regs->mcr);
par->mode = mode;
@ -343,7 +343,7 @@ static int cg14_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
FBTYPE_MDICOLOR, 8,
info->fix.smem_len);
break;
};
}
return ret;
}
@ -583,8 +583,6 @@ static int cg14_remove(struct platform_device *op)
framebuffer_release(info);
dev_set_drvdata(&op->dev, NULL);
return 0;
}

2
drivers/video/cg3.c
View File

@ -446,8 +446,6 @@ static int cg3_remove(struct platform_device *op)
framebuffer_release(info);
dev_set_drvdata(&op->dev, NULL);
return 0;
}

4
drivers/video/cg6.c
View File

@ -624,7 +624,7 @@ static void cg6_init_fix(struct fb_info *info, int linebytes)
default:
cg6_cpu_name = "i386";
break;
};
}
if (((conf >> CG6_FHC_REV_SHIFT) & CG6_FHC_REV_MASK) >= 11) {
if (info->fix.smem_len <= 0x100000)
cg6_card_name = "TGX";
@ -839,8 +839,6 @@ static int cg6_remove(struct platform_device *op)
framebuffer_release(info);
dev_set_drvdata(&op->dev, NULL);
return 0;
}

6
drivers/video/cirrusfb.c
View File

@ -595,11 +595,6 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
return -EINVAL;
}
if (var->xoffset < 0)
var->xoffset = 0;
if (var->yoffset < 0)
var->yoffset = 0;
/* truncate xoffset and yoffset to maximum if too high */
if (var->xoffset > var->xres_virtual - var->xres)
var->xoffset = var->xres_virtual - var->xres - 1;
@ -2159,7 +2154,6 @@ static int cirrusfb_pci_register(struct pci_dev *pdev,
if (!ret)
return 0;
pci_set_drvdata(pdev, NULL);
iounmap(info->screen_base);
err_release_legacy:
if (release_io_ports)

17
drivers/video/cobalt_lcdfb.c
View File

@ -368,8 +368,7 @@ static int cobalt_lcdfb_probe(struct platform_device *dev)
lcd_clear(info);
printk(KERN_INFO "fb%d: Cobalt server LCD frame buffer device\n",
info->node);
fb_info(info, "Cobalt server LCD frame buffer device\n");
return 0;
}
@ -395,19 +394,7 @@ static struct platform_driver cobalt_lcdfb_driver = {
.owner = THIS_MODULE,
},
};
static int __init cobalt_lcdfb_init(void)
{
return platform_driver_register(&cobalt_lcdfb_driver);
}
static void __exit cobalt_lcdfb_exit(void)
{
platform_driver_unregister(&cobalt_lcdfb_driver);
}
module_init(cobalt_lcdfb_init);
module_exit(cobalt_lcdfb_exit);
module_platform_driver(cobalt_lcdfb_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Yoichi Yuasa");

4
drivers/video/controlfb.c
View File

@ -471,8 +471,8 @@ try_again:
/* Register with fbdev layer */
if (register_framebuffer(&p->info) < 0)
return -ENXIO;
printk(KERN_INFO "fb%d: control display adapter\n", p->info.node);
fb_info(&p->info, "control display adapter\n");
return 0;
}

5
drivers/video/cyber2000fb.c
View File

@ -1810,11 +1810,6 @@ static void cyberpro_pci_remove(struct pci_dev *dev)
iounmap(cfb->region);
cyberpro_free_fb_info(cfb);
/*
* Ensure that the driver data is no longer
* valid.
*/
pci_set_drvdata(dev, NULL);
if (cfb == int_cfb_info)
int_cfb_info = NULL;

21
drivers/video/da8xx-fb.c
View File

@ -129,7 +129,6 @@
#define LCD_NUM_BUFFERS 2
#define WSI_TIMEOUT 50
#define PALETTE_SIZE 256
#define CLK_MIN_DIV 2
@ -1314,7 +1313,7 @@ static struct fb_ops da8xx_fb_ops = {
static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
{
struct da8xx_lcdc_platform_data *fb_pdata = dev->dev.platform_data;
struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
struct fb_videomode *lcdc_info;
int i;
@ -1336,7 +1335,7 @@ static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
static int fb_probe(struct platform_device *device)
{
struct da8xx_lcdc_platform_data *fb_pdata =
device->dev.platform_data;
dev_get_platdata(&device->dev);
static struct resource *lcdc_regs;
struct lcd_ctrl_config *lcd_cfg;
struct fb_videomode *lcdc_info;
@ -1548,7 +1547,7 @@ err_pm_runtime_disable:
}
#ifdef CONFIG_PM
struct lcdc_context {
static struct lcdc_context {
u32 clk_enable;
u32 ctrl;
u32 dma_ctrl;
@ -1663,19 +1662,7 @@ static struct platform_driver da8xx_fb_driver = {
.owner = THIS_MODULE,
},
};
static int __init da8xx_fb_init(void)
{
return platform_driver_register(&da8xx_fb_driver);
}
static void __exit da8xx_fb_cleanup(void)
{
platform_driver_unregister(&da8xx_fb_driver);
}
module_init(da8xx_fb_init);
module_exit(da8xx_fb_cleanup);
module_platform_driver(da8xx_fb_driver);
MODULE_DESCRIPTION("Framebuffer driver for TI da8xx/omap-l1xx");
MODULE_AUTHOR("Texas Instruments");

7
drivers/video/efifb.c
View File

@ -108,8 +108,8 @@ static int efifb_setup(char *options)
if (!*this_opt) continue;
for (i = 0; i < M_UNKNOWN; i++) {
if (!strcmp(this_opt, efifb_dmi_list[i].optname) &&
efifb_dmi_list[i].base != 0) {
if (efifb_dmi_list[i].base != 0 &&
!strcmp(this_opt, efifb_dmi_list[i].optname)) {
screen_info.lfb_base = efifb_dmi_list[i].base;
screen_info.lfb_linelength = efifb_dmi_list[i].stride;
screen_info.lfb_width = efifb_dmi_list[i].width;
@ -322,8 +322,7 @@ static int efifb_probe(struct platform_device *dev)
printk(KERN_ERR "efifb: cannot register framebuffer\n");
goto err_fb_dealoc;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err_fb_dealoc:

2
drivers/video/ep93xx-fb.c
View File

@ -487,7 +487,7 @@ static void ep93xxfb_dealloc_videomem(struct fb_info *info)
static int ep93xxfb_probe(struct platform_device *pdev)
{
struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data;
struct ep93xxfb_mach_info *mach_info = dev_get_platdata(&pdev->dev);
struct fb_info *info;
struct ep93xx_fbi *fbi;
struct resource *res;

3
drivers/video/exynos/exynos_mipi_dsi_common.c
View File

@ -376,6 +376,7 @@ int exynos_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
"data id %x is not supported current DSI spec.\n",
data_id);
mutex_unlock(&dsim->lock);
return -EINVAL;
}
@ -667,7 +668,7 @@ int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim)
default:
dev_info(dsim->dev, "data lane is invalid.\n");
return -EINVAL;
};
}
exynos_mipi_dsi_sw_reset(dsim);
exynos_mipi_dsi_func_reset(dsim);

5
drivers/video/fb-puv3.c
View File

@ -713,9 +713,8 @@ static int unifb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM);
printk(KERN_INFO
"fb%d: Virtual frame buffer device, using %dM of video memory\n",
info->node, UNIFB_MEMSIZE >> 20);
fb_info(info, "Virtual frame buffer device, using %dM of video memory\n",
UNIFB_MEMSIZE >> 20);
return 0;
err2:
fb_dealloc_cmap(&info->cmap);

50
drivers/video/fbmem.c
View File

@ -1108,14 +1108,16 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
case FBIOPUT_VSCREENINFO:
if (copy_from_user(&var, argp, sizeof(var)))
return -EFAULT;
if (!lock_fb_info(info))
return -ENODEV;
console_lock();
if (!lock_fb_info(info)) {
console_unlock();
return -ENODEV;
}
info->flags |= FBINFO_MISC_USEREVENT;
ret = fb_set_var(info, &var);
info->flags &= ~FBINFO_MISC_USEREVENT;
console_unlock();
unlock_fb_info(info);
console_unlock();
if (!ret && copy_to_user(argp, &var, sizeof(var)))
ret = -EFAULT;
break;
@ -1144,12 +1146,14 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
case FBIOPAN_DISPLAY:
if (copy_from_user(&var, argp, sizeof(var)))
return -EFAULT;
if (!lock_fb_info(info))
return -ENODEV;
console_lock();
if (!lock_fb_info(info)) {
console_unlock();
return -ENODEV;
}
ret = fb_pan_display(info, &var);
console_unlock();
unlock_fb_info(info);
console_unlock();
if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
return -EFAULT;
break;
@ -1184,23 +1188,27 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
break;
}
event.data = &con2fb;
if (!lock_fb_info(info))
return -ENODEV;
console_lock();
if (!lock_fb_info(info)) {
console_unlock();
return -ENODEV;
}
event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
console_unlock();
unlock_fb_info(info);
console_unlock();
break;
case FBIOBLANK:
if (!lock_fb_info(info))
return -ENODEV;
console_lock();
if (!lock_fb_info(info)) {
console_unlock();
return -ENODEV;
}
info->flags |= FBINFO_MISC_USEREVENT;
ret = fb_blank(info, arg);
info->flags &= ~FBINFO_MISC_USEREVENT;
console_unlock();
unlock_fb_info(info);
console_unlock();
break;
default:
if (!lock_fb_info(info))
@ -1660,12 +1668,15 @@ static int do_register_framebuffer(struct fb_info *fb_info)
registered_fb[i] = fb_info;
event.info = fb_info;
if (!lock_fb_info(fb_info))
return -ENODEV;
console_lock();
if (!lock_fb_info(fb_info)) {
console_unlock();
return -ENODEV;
}
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
console_unlock();
unlock_fb_info(fb_info);
console_unlock();
return 0;
}
@ -1678,13 +1689,16 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
return -EINVAL;
if (!lock_fb_info(fb_info))
return -ENODEV;
console_lock();
if (!lock_fb_info(fb_info)) {
console_unlock();
return -ENODEV;
}
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
console_unlock();
unlock_fb_info(fb_info);
console_unlock();
if (ret)
return -EINVAL;

19
drivers/video/fbsysfs.c
View File

@ -177,9 +177,12 @@ static ssize_t store_modes(struct device *device,
if (i * sizeof(struct fb_videomode) != count)
return -EINVAL;
if (!lock_fb_info(fb_info))
return -ENODEV;
console_lock();
if (!lock_fb_info(fb_info)) {
console_unlock();
return -ENODEV;
}
list_splice(&fb_info->modelist, &old_list);
fb_videomode_to_modelist((const struct fb_videomode *)buf, i,
&fb_info->modelist);
@ -189,8 +192,8 @@ static ssize_t store_modes(struct device *device,
} else
fb_destroy_modelist(&old_list);
console_unlock();
unlock_fb_info(fb_info);
console_unlock();
return 0;
}
@ -404,12 +407,16 @@ static ssize_t store_fbstate(struct device *device,
state = simple_strtoul(buf, &last, 0);
if (!lock_fb_info(fb_info))
return -ENODEV;
console_lock();
if (!lock_fb_info(fb_info)) {
console_unlock();
return -ENODEV;
}
fb_set_suspend(fb_info, (int)state);
console_unlock();
unlock_fb_info(fb_info);
console_unlock();
return count;
}

2
drivers/video/ffb.c
View File

@ -1035,8 +1035,6 @@ static int ffb_remove(struct platform_device *op)
framebuffer_release(info);
dev_set_drvdata(&op->dev, NULL);
return 0;
}

2
drivers/video/fm2fb.c
View File

@ -289,7 +289,7 @@ static int fm2fb_probe(struct zorro_dev *z, const struct zorro_device_id *id)
zorro_release_device(z);
return -EINVAL;
}
printk("fb%d: %s frame buffer device\n", info->node, fb_fix.id);
fb_info(info, "%s frame buffer device\n", fb_fix.id);
return 0;
}

2
drivers/video/fsl-diu-fb.c
View File

@ -1104,7 +1104,7 @@ static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor)
fsl_diu_load_cursor_image(info, image, bg, fg,
cursor->image.width, cursor->image.height);
};
}
/*
* Show or hide the cursor. The cursor data is always stored in the

6
drivers/video/gbefb.c
View File

@ -1236,9 +1236,9 @@ static int gbefb_probe(struct platform_device *p_dev)
platform_set_drvdata(p_dev, info);
gbefb_create_sysfs(&p_dev->dev);
printk(KERN_INFO "fb%d: %s rev %d @ 0x%08x using %dkB memory\n",
info->node, info->fix.id, gbe_revision, (unsigned) GBE_BASE,
gbe_mem_size >> 10);
fb_info(info, "%s rev %d @ 0x%08x using %dkB memory\n",
info->fix.id, gbe_revision, (unsigned)GBE_BASE,
gbe_mem_size >> 10);
return 0;

3
drivers/video/geode/gx1fb_core.c
View File

@ -357,7 +357,7 @@ static int gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err;
}
pci_set_drvdata(pdev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err:
@ -399,7 +399,6 @@ static void gx1fb_remove(struct pci_dev *pdev)
release_mem_region(gx1_gx_base() + 0x8300, 0x100);
fb_dealloc_cmap(&info->cmap);
pci_set_drvdata(pdev, NULL);
framebuffer_release(info);
}

3
drivers/video/geode/gxfb_core.c
View File

@ -423,7 +423,7 @@ static int gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err;
}
pci_set_drvdata(pdev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err:
@ -471,7 +471,6 @@ static void gxfb_remove(struct pci_dev *pdev)
pci_release_region(pdev, 1);
fb_dealloc_cmap(&info->cmap);
pci_set_drvdata(pdev, NULL);
framebuffer_release(info);
}

4
drivers/video/geode/lxfb_core.c
View File

@ -555,8 +555,7 @@ static int lxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err;
}
pci_set_drvdata(pdev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
@ -606,7 +605,6 @@ static void lxfb_remove(struct pci_dev *pdev)
pci_release_region(pdev, 3);
fb_dealloc_cmap(&info->cmap);
pci_set_drvdata(pdev, NULL);
framebuffer_release(info);
}

16
drivers/video/grvga.c
View File

@ -496,7 +496,6 @@ static int grvga_probe(struct platform_device *dev)
return 0;
free_mem:
dev_set_drvdata(&dev->dev, NULL);
if (grvga_fix_addr)
iounmap((void *)virtual_start);
else
@ -530,7 +529,6 @@ static int grvga_remove(struct platform_device *device)
kfree((void *)info->screen_base);
framebuffer_release(info);
dev_set_drvdata(&device->dev, NULL);
}
return 0;
@ -557,19 +555,7 @@ static struct platform_driver grvga_driver = {
.remove = grvga_remove,
};
static int __init grvga_init(void)
{
return platform_driver_register(&grvga_driver);
}
static void __exit grvga_exit(void)
{
platform_driver_unregister(&grvga_driver);
}
module_init(grvga_init);
module_exit(grvga_exit);
module_platform_driver(grvga_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Aeroflex Gaisler");

3
drivers/video/gxt4500.c
View File

@ -698,8 +698,7 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "gxt4500: cannot register framebuffer\n");
goto err_free_cmap;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;

19
drivers/video/hecubafb.c
View File

@ -261,9 +261,8 @@ static int hecubafb_probe(struct platform_device *dev)
goto err_fbreg;
platform_set_drvdata(dev, info);
printk(KERN_INFO
"fb%d: Hecuba frame buffer device, using %dK of video memory\n",
info->node, videomemorysize >> 10);
fb_info(info, "Hecuba frame buffer device, using %dK of video memory\n",
videomemorysize >> 10);
/* this inits the dpy */
retval = par->board->init(par);
@ -305,19 +304,7 @@ static struct platform_driver hecubafb_driver = {
.name = "hecubafb",
},
};
static int __init hecubafb_init(void)
{
return platform_driver_register(&hecubafb_driver);
}
static void __exit hecubafb_exit(void)
{
platform_driver_unregister(&hecubafb_driver);
}
module_init(hecubafb_init);
module_exit(hecubafb_exit);
module_platform_driver(hecubafb_driver);
MODULE_DESCRIPTION("fbdev driver for Hecuba/Apollo controller");
MODULE_AUTHOR("Jaya Kumar");

3
drivers/video/hgafb.c
View File

@ -586,8 +586,7 @@ static int hgafb_probe(struct platform_device *pdev)
return -EINVAL;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
platform_set_drvdata(pdev, info);
return 0;
}

3
drivers/video/hitfb.c
View File

@ -405,8 +405,7 @@ static int hitfb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;

3
drivers/video/hpfb.c
View File

@ -298,8 +298,7 @@ static int hpfb_init_one(unsigned long phys_base, unsigned long virt_base)
if (ret < 0)
goto dealloc_cmap;
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fb_info.node, fb_info.fix.id);
fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
return 0;

45
drivers/video/hyperv_fb.c
View File

@ -575,6 +575,10 @@ static int hvfb_setcolreg(unsigned regno, unsigned red, unsigned green,
return 0;
}
static int hvfb_blank(int blank, struct fb_info *info)
{
return 1; /* get fb_blank to set the colormap to all black */
}
static struct fb_ops hvfb_ops = {
.owner = THIS_MODULE,
@ -584,6 +588,7 @@ static struct fb_ops hvfb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = hvfb_blank,
};
@ -795,12 +800,21 @@ static int hvfb_remove(struct hv_device *hdev)
}
static DEFINE_PCI_DEVICE_TABLE(pci_stub_id_table) = {
{
.vendor = PCI_VENDOR_ID_MICROSOFT,
.device = PCI_DEVICE_ID_HYPERV_VIDEO,
},
{ /* end of list */ }
};
static const struct hv_vmbus_device_id id_table[] = {
/* Synthetic Video Device GUID */
{HV_SYNTHVID_GUID},
{}
};
MODULE_DEVICE_TABLE(pci, pci_stub_id_table);
MODULE_DEVICE_TABLE(vmbus, id_table);
static struct hv_driver hvfb_drv = {
@ -810,14 +824,43 @@ static struct hv_driver hvfb_drv = {
.remove = hvfb_remove,
};
static int hvfb_pci_stub_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
return 0;
}
static void hvfb_pci_stub_remove(struct pci_dev *pdev)
{
}
static struct pci_driver hvfb_pci_stub_driver = {
.name = KBUILD_MODNAME,
.id_table = pci_stub_id_table,
.probe = hvfb_pci_stub_probe,
.remove = hvfb_pci_stub_remove,
};
static int __init hvfb_drv_init(void)
{
return vmbus_driver_register(&hvfb_drv);
int ret;
ret = vmbus_driver_register(&hvfb_drv);
if (ret != 0)
return ret;
ret = pci_register_driver(&hvfb_pci_stub_driver);
if (ret != 0) {
vmbus_driver_unregister(&hvfb_drv);
return ret;
}
return 0;
}
static void __exit hvfb_drv_exit(void)
{
pci_unregister_driver(&hvfb_pci_stub_driver);
vmbus_driver_unregister(&hvfb_drv);
}

9
drivers/video/i740fb.c
View File

@ -203,8 +203,7 @@ static int i740fb_release(struct fb_info *info, int user)
mutex_lock(&(par->open_lock));
if (par->ref_count == 0) {
printk(KERN_ERR "fb%d: release called with zero refcount\n",
info->node);
fb_err(info, "release called with zero refcount\n");
mutex_unlock(&(par->open_lock));
return -EINVAL;
}
@ -1067,7 +1066,7 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
(tmp & DRAM_RAS_PRECHARGE));
printk(KERN_INFO "fb%d: Intel740 on %s, %ld KB %s\n", info->node,
fb_info(info, "Intel740 on %s, %ld KB %s\n",
pci_name(dev), info->screen_size >> 10,
par->has_sgram ? "SGRAM" : "SDRAM");
@ -1143,8 +1142,7 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
goto err_reg_framebuffer;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
@ -1194,7 +1192,6 @@ static void i740fb_remove(struct pci_dev *dev)
pci_iounmap(dev, info->screen_base);
pci_release_regions(dev);
/* pci_disable_device(dev); */
pci_set_drvdata(dev, NULL);
framebuffer_release(info);
}
}

1
drivers/video/i810/i810_main.c
View File

@ -2129,7 +2129,6 @@ static void __exit i810fb_remove_pci(struct pci_dev *dev)
unregister_framebuffer(info);
i810fb_release_resource(info, par);
pci_set_drvdata(dev, NULL);
printk("cleanup_module: unloaded i810 framebuffer device\n");
}

5
drivers/video/igafb.c
View File

@ -360,9 +360,8 @@ static int __init iga_init(struct fb_info *info, struct iga_par *par)
if (register_framebuffer(info) < 0)
return 0;
printk("fb%d: %s frame buffer device at 0x%08lx [%dMB VRAM]\n",
info->node, info->fix.id,
par->frame_buffer_phys, info->fix.smem_len >> 20);
fb_info(info, "%s frame buffer device at 0x%08lx [%dMB VRAM]\n",
info->fix.id, par->frame_buffer_phys, info->fix.smem_len >> 20);
iga_blank_border(par);
return 1;

4
drivers/video/imsttfb.c
View File

@ -1461,8 +1461,8 @@ static void init_imstt(struct fb_info *info)
}
tmp = (read_reg_le32(par->dc_regs, SSTATUS) & 0x0f00) >> 8;
printk("fb%u: %s frame buffer; %uMB vram; chip version %u\n",
info->node, info->fix.id, info->fix.smem_len >> 20, tmp);
fb_info(info, "%s frame buffer; %uMB vram; chip version %u\n",
info->fix.id, info->fix.smem_len >> 20, tmp);
}
static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

6
drivers/video/imxfb.c
View File

@ -755,7 +755,7 @@ static int imxfb_resume(struct platform_device *dev)
static int imxfb_init_fbinfo(struct platform_device *pdev)
{
struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
struct imx_fb_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct fb_info *info = dev_get_drvdata(&pdev->dev);
struct imxfb_info *fbi = info->par;
struct device_node *np;
@ -877,7 +877,7 @@ static int imxfb_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
pdata = pdev->dev.platform_data;
pdata = dev_get_platdata(&pdev->dev);
info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev);
if (!info)
@ -1066,7 +1066,7 @@ static int imxfb_remove(struct platform_device *pdev)
#endif
unregister_framebuffer(info);
pdata = pdev->dev.platform_data;
pdata = dev_get_platdata(&pdev->dev);
if (pdata && pdata->exit)
pdata->exit(fbi->pdev);

2
drivers/video/intelfb/intelfbdrv.c
View File

@ -931,8 +931,6 @@ static void intelfb_pci_unregister(struct pci_dev *pdev)
return;
cleanup(dinfo);
pci_set_drvdata(pdev, NULL);
}
/***************************************************************

29
drivers/video/jz4740_fb.c
View File

@ -99,9 +99,9 @@
#define JZ_LCD_CTRL_BPP_15_16 0x4
#define JZ_LCD_CTRL_BPP_18_24 0x5
#define JZ_LCD_CMD_SOF_IRQ BIT(15)
#define JZ_LCD_CMD_EOF_IRQ BIT(16)
#define JZ_LCD_CMD_ENABLE_PAL BIT(12)
#define JZ_LCD_CMD_SOF_IRQ BIT(31)
#define JZ_LCD_CMD_EOF_IRQ BIT(30)
#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
#define JZ_LCD_SYNC_MASK 0x3ff
@ -471,7 +471,7 @@ static int jzfb_set_par(struct fb_info *info)
writel(ctrl, jzfb->base + JZ_REG_LCD_CTRL);
if (!jzfb->is_enabled)
clk_disable(jzfb->ldclk);
clk_disable_unprepare(jzfb->ldclk);
mutex_unlock(&jzfb->lock);
@ -485,7 +485,7 @@ static void jzfb_enable(struct jzfb *jzfb)
{
uint32_t ctrl;
clk_enable(jzfb->ldclk);
clk_prepare_enable(jzfb->ldclk);
jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
@ -514,7 +514,7 @@ static void jzfb_disable(struct jzfb *jzfb)
jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
clk_disable(jzfb->ldclk);
clk_disable_unprepare(jzfb->ldclk);
}
static int jzfb_blank(int blank_mode, struct fb_info *info)
@ -693,7 +693,7 @@ static int jzfb_probe(struct platform_device *pdev)
fb_alloc_cmap(&fb->cmap, 256, 0);
clk_enable(jzfb->ldclk);
clk_prepare_enable(jzfb->ldclk);
jzfb->is_enabled = 1;
writel(jzfb->framedesc->next, jzfb->base + JZ_REG_LCD_DA0);
@ -763,7 +763,7 @@ static int jzfb_suspend(struct device *dev)
static int jzfb_resume(struct device *dev)
{
struct jzfb *jzfb = dev_get_drvdata(dev);
clk_enable(jzfb->ldclk);
clk_prepare_enable(jzfb->ldclk);
mutex_lock(&jzfb->lock);
if (jzfb->is_enabled)
@ -798,18 +798,7 @@ static struct platform_driver jzfb_driver = {
.pm = JZFB_PM_OPS,
},
};
static int __init jzfb_init(void)
{
return platform_driver_register(&jzfb_driver);
}
module_init(jzfb_init);
static void __exit jzfb_exit(void)
{
platform_driver_unregister(&jzfb_driver);
}
module_exit(jzfb_exit);
module_platform_driver(jzfb_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");

10
drivers/video/kyro/fbdev.c
View File

@ -623,7 +623,6 @@ static int kyrofb_ioctl(struct fb_info *info,
"command instead.\n");
return -EINVAL;
}
break;
case KYRO_IOCTL_UVSTRIDE:
if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(unsigned long)))
return -EFAULT;
@ -736,10 +735,10 @@ static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (register_framebuffer(info) < 0)
goto out_unmap;
printk("fb%d: %s frame buffer device, at %dx%d@%d using %ldk/%ldk of VRAM\n",
info->node, info->fix.id, info->var.xres,
info->var.yres, info->var.bits_per_pixel, size >> 10,
(unsigned long)info->fix.smem_len >> 10);
fb_info(info, "%s frame buffer device, at %dx%d@%d using %ldk/%ldk of VRAM\n",
info->fix.id,
info->var.xres, info->var.yres, info->var.bits_per_pixel,
size >> 10, (unsigned long)info->fix.smem_len >> 10);
pci_set_drvdata(pdev, info);
@ -779,7 +778,6 @@ static void kyrofb_remove(struct pci_dev *pdev)
#endif
unregister_framebuffer(info);
pci_set_drvdata(pdev, NULL);
framebuffer_release(info);
}

4
drivers/video/leo.c
View File

@ -469,7 +469,7 @@ static void leo_wid_put(struct fb_info *info, struct fb_wid_list *wl)
default:
continue;
};
}
sbus_writel(0x5800 + j, &lx_krn->krn_type);
sbus_writel(wi->wi_values[0], &lx_krn->krn_value);
}
@ -648,8 +648,6 @@ static int leo_remove(struct platform_device *op)
framebuffer_release(info);
dev_set_drvdata(&op->dev, NULL);
return 0;
}

3
drivers/video/macfb.c
View File

@ -913,8 +913,7 @@ static int __init macfb_init(void)
if (err)
goto fail_dealloc;
pr_info("fb%d: %s frame buffer device\n",
fb_info.node, fb_info.fix.id);
fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
return 0;

4
drivers/video/matrox/matroxfb_DAC1064.c
View File

@ -494,7 +494,7 @@ static int m1064_compute(void* out, struct my_timming* m) {
if (inDAC1064(minfo, M1064_XPIXPLLSTAT) & 0x40)
break;
udelay(10);
};
}
CRITEND
@ -639,7 +639,7 @@ static void MGAG100_progPixClock(const struct matrox_fb_info *minfo, int flags,
if (inDAC1064(minfo, M1064_XPIXPLLSTAT) & 0x40)
break;
udelay(10);
};
}
if (!clk)
printk(KERN_ERR "matroxfb: Pixel PLL%c not locked after usual time\n", (reg-M1064_XPIXPLLAM-2)/4 + 'A');
selClk = inDAC1064(minfo, M1064_XPIXCLKCTRL) & ~M1064_XPIXCLKCTRL_SRC_MASK;

2
drivers/video/matrox/matroxfb_Ti3026.c
View File

@ -473,7 +473,7 @@ static void ti3026_setMCLK(struct matrox_fb_info *minfo, int fout)
if (inTi3026(minfo, TVP3026_XPIXPLLDATA) & 0x40)
break;
udelay(10);
};
}
if (!tmout)
printk(KERN_ERR "matroxfb: Temporary pixel PLL not locked after 5 secs\n");

6
drivers/video/matrox/matroxfb_base.c
View File

@ -1893,14 +1893,12 @@ static int initMatrox2(struct matrox_fb_info *minfo, struct board *b)
if (register_framebuffer(&minfo->fbcon) < 0) {
goto failVideoIO;
}
printk("fb%d: %s frame buffer device\n",
minfo->fbcon.node, minfo->fbcon.fix.id);
fb_info(&minfo->fbcon, "%s frame buffer device\n", minfo->fbcon.fix.id);
/* there is no console on this fb... but we have to initialize hardware
* until someone tells me what is proper thing to do */
if (!minfo->initialized) {
printk(KERN_INFO "fb%d: initializing hardware\n",
minfo->fbcon.node);
fb_info(&minfo->fbcon, "initializing hardware\n");
/* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
* already before, so register_framebuffer works correctly. */
vesafb_defined.activate |= FB_ACTIVATE_FORCE;

14
drivers/video/matrox/matroxfb_maven.c
View File

@ -1295,19 +1295,7 @@ static struct i2c_driver maven_driver={
.id_table = maven_id,
};
static int __init matroxfb_maven_init(void)
{
return i2c_add_driver(&maven_driver);
}
static void __exit matroxfb_maven_exit(void)
{
i2c_del_driver(&maven_driver);
}
module_i2c_driver(maven_driver);
MODULE_AUTHOR("(c) 1999-2002 Petr Vandrovec <vandrove@vc.cvut.cz>");
MODULE_DESCRIPTION("Matrox G200/G400 Matrox MGA-TVO driver");
MODULE_LICENSE("GPL");
module_init(matroxfb_maven_init);
module_exit(matroxfb_maven_exit);
/* we do not have __setup() yet */

3
drivers/video/mb862xx/mb862xxfbdrv.c
View File

@ -781,7 +781,6 @@ rel_reg:
irqdisp:
irq_dispose_mapping(par->irq);
fbrel:
dev_set_drvdata(dev, NULL);
framebuffer_release(info);
return ret;
}
@ -814,7 +813,6 @@ static int of_platform_mb862xx_remove(struct platform_device *ofdev)
iounmap(par->mmio_base);
iounmap(par->fb_base);
dev_set_drvdata(&ofdev->dev, NULL);
release_mem_region(par->res->start, res_size);
framebuffer_release(fbi);
return 0;
@ -1157,7 +1155,6 @@ static void mb862xx_pci_remove(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_dispregs);
pci_set_drvdata(pdev, NULL);
unregister_framebuffer(fbi);
fb_dealloc_cmap(&fbi->cmap);

4
drivers/video/mbx/mbxfb.c
View File

@ -890,7 +890,7 @@ static int mbxfb_probe(struct platform_device *dev)
dev_dbg(&dev->dev, "mbxfb_probe\n");
pdata = dev->dev.platform_data;
pdata = dev_get_platdata(&dev->dev);
if (!pdata) {
dev_err(&dev->dev, "platform data is required\n");
return -EINVAL;
@ -976,7 +976,7 @@ static int mbxfb_probe(struct platform_device *dev)
platform_set_drvdata(dev, fbi);
printk(KERN_INFO "fb%d: mbx frame buffer device\n", fbi->node);
fb_info(fbi, "mbx frame buffer device\n");
if (mfbi->platform_probe)
mfbi->platform_probe(fbi);

17
drivers/video/metronomefb.c
View File

@ -690,7 +690,8 @@ static int metronomefb_probe(struct platform_device *dev)
goto err_csum_table;
}
if (board->setup_irq(info))
retval = board->setup_irq(info);
if (retval)
goto err_csum_table;
retval = metronome_init_regs(par);
@ -769,23 +770,11 @@ static struct platform_driver metronomefb_driver = {
.name = "metronomefb",
},
};
static int __init metronomefb_init(void)
{
return platform_driver_register(&metronomefb_driver);
}
static void __exit metronomefb_exit(void)
{
platform_driver_unregister(&metronomefb_driver);
}
module_platform_driver(metronomefb_driver);
module_param(user_wfm_size, uint, 0);
MODULE_PARM_DESC(user_wfm_size, "Set custom waveform size");
module_init(metronomefb_init);
module_exit(metronomefb_exit);
MODULE_DESCRIPTION("fbdev driver for Metronome controller");
MODULE_AUTHOR("Jaya Kumar");
MODULE_LICENSE("GPL");

34
drivers/video/mmp/fb/mmpfb.c
View File

@ -392,12 +392,29 @@ static int var_update(struct fb_info *info)
return 0;
}
static void mmpfb_set_win(struct fb_info *info)
{
struct mmpfb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
struct mmp_win win;
u32 stride;
memset(&win, 0, sizeof(win));
win.xsrc = win.xdst = fbi->mode.xres;
win.ysrc = win.ydst = fbi->mode.yres;
win.pix_fmt = fbi->pix_fmt;
stride = pixfmt_to_stride(win.pix_fmt);
win.pitch[0] = var->xres_virtual * stride;
win.pitch[1] = win.pitch[2] =
(stride == 1) ? (var->xres_virtual >> 1) : 0;
mmp_overlay_set_win(fbi->overlay, &win);
}
static int mmpfb_set_par(struct fb_info *info)
{
struct mmpfb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
struct mmp_addr addr;
struct mmp_win win;
struct mmp_mode mode;
int ret;
@ -409,11 +426,8 @@ static int mmpfb_set_par(struct fb_info *info)
fbmode_to_mmpmode(&mode, &fbi->mode, fbi->output_fmt);
mmp_path_set_mode(fbi->path, &mode);
memset(&win, 0, sizeof(win));
win.xsrc = win.xdst = fbi->mode.xres;
win.ysrc = win.ydst = fbi->mode.yres;
win.pix_fmt = fbi->pix_fmt;
mmp_overlay_set_win(fbi->overlay, &win);
/* set window related info */
mmpfb_set_win(info);
/* set address always */
memset(&addr, 0, sizeof(addr));
@ -427,16 +441,12 @@ static int mmpfb_set_par(struct fb_info *info)
static void mmpfb_power(struct mmpfb_info *fbi, int power)
{
struct mmp_addr addr;
struct mmp_win win;
struct fb_var_screeninfo *var = &fbi->fb_info->var;
/* for power on, always set address/window again */
if (power) {
memset(&win, 0, sizeof(win));
win.xsrc = win.xdst = fbi->mode.xres;
win.ysrc = win.ydst = fbi->mode.yres;
win.pix_fmt = fbi->pix_fmt;
mmp_overlay_set_win(fbi->overlay, &win);
/* set window related info */
mmpfb_set_win(fbi->fb_info);
/* set address always */
memset(&addr, 0, sizeof(addr));

71
drivers/video/mmp/hw/mmp_ctrl.c
View File

@ -53,15 +53,14 @@ static irqreturn_t ctrl_handle_irq(int irq, void *dev_id)
tmp = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR);
if (tmp & isr)
writel_relaxed(~isr, ctrl->reg_base + SPU_IRQ_ISR);
} while ((isr = readl(ctrl->reg_base + SPU_IRQ_ISR)) & imask);
} while ((isr = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR)) & imask);
return IRQ_HANDLED;
}
static u32 fmt_to_reg(struct mmp_overlay *overlay, int pix_fmt)
{
u32 link_config = path_to_path_plat(overlay->path)->link_config;
u32 rbswap, uvswap = 0, yuvswap = 0,
u32 rbswap = 0, uvswap = 0, yuvswap = 0,
csc_en = 0, val = 0,
vid = overlay_is_vid(overlay);
@ -71,27 +70,23 @@ static u32 fmt_to_reg(struct mmp_overlay *overlay, int pix_fmt)
case PIXFMT_RGB888PACK:
case PIXFMT_RGB888UNPACK:
case PIXFMT_RGBA888:
rbswap = !(link_config & 0x1);
rbswap = 1;
break;
case PIXFMT_VYUY:
case PIXFMT_YVU422P:
case PIXFMT_YVU420P:
rbswap = link_config & 0x1;
uvswap = 1;
break;
case PIXFMT_YUYV:
rbswap = link_config & 0x1;
yuvswap = 1;
break;
default:
rbswap = link_config & 0x1;
break;
}
switch (pix_fmt) {
case PIXFMT_RGB565:
case PIXFMT_BGR565:
val = 0;
break;
case PIXFMT_RGB1555:
case PIXFMT_BGR1555:
@ -147,17 +142,27 @@ static void dmafetch_set_fmt(struct mmp_overlay *overlay)
static void overlay_set_win(struct mmp_overlay *overlay, struct mmp_win *win)
{
struct lcd_regs *regs = path_regs(overlay->path);
u32 pitch;
/* assert win supported */
memcpy(&overlay->win, win, sizeof(struct mmp_win));
mutex_lock(&overlay->access_ok);
pitch = win->xsrc * pixfmt_to_stride(win->pix_fmt);
writel_relaxed(pitch, &regs->g_pitch);
writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->g_size);
writel_relaxed((win->ydst << 16) | win->xdst, &regs->g_size_z);
writel_relaxed(0, &regs->g_start);
if (overlay_is_vid(overlay)) {
writel_relaxed(win->pitch[0], &regs->v_pitch_yc);
writel_relaxed(win->pitch[2] << 16 |
win->pitch[1], &regs->v_pitch_uv);
writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->v_size);
writel_relaxed((win->ydst << 16) | win->xdst, &regs->v_size_z);
writel_relaxed(win->ypos << 16 | win->xpos, &regs->v_start);
} else {
writel_relaxed(win->pitch[0], &regs->g_pitch);
writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->g_size);
writel_relaxed((win->ydst << 16) | win->xdst, &regs->g_size_z);
writel_relaxed(win->ypos << 16 | win->xpos, &regs->g_start);
}
dmafetch_set_fmt(overlay);
mutex_unlock(&overlay->access_ok);
@ -239,7 +244,13 @@ static int overlay_set_addr(struct mmp_overlay *overlay, struct mmp_addr *addr)
/* FIXME: assert addr supported */
memcpy(&overlay->addr, addr, sizeof(struct mmp_addr));
writel(addr->phys[0], &regs->g_0);
if (overlay_is_vid(overlay)) {
writel_relaxed(addr->phys[0], &regs->v_y0);
writel_relaxed(addr->phys[1], &regs->v_u0);
writel_relaxed(addr->phys[2], &regs->v_v0);
} else
writel_relaxed(addr->phys[0], &regs->g_0);
return overlay->addr.phys[0];
}
@ -248,7 +259,8 @@ static void path_set_mode(struct mmp_path *path, struct mmp_mode *mode)
{
struct lcd_regs *regs = path_regs(path);
u32 total_x, total_y, vsync_ctrl, tmp, sclk_src, sclk_div,
link_config = path_to_path_plat(path)->link_config;
link_config = path_to_path_plat(path)->link_config,
dsi_rbswap = path_to_path_plat(path)->link_config;
/* FIXME: assert videomode supported */
memcpy(&path->mode, mode, sizeof(struct mmp_mode));
@ -263,6 +275,12 @@ static void path_set_mode(struct mmp_path *path, struct mmp_mode *mode)
tmp |= CFG_DUMB_ENA(1);
writel_relaxed(tmp, ctrl_regs(path) + intf_ctrl(path->id));
/* interface rb_swap setting */
tmp = readl_relaxed(ctrl_regs(path) + intf_rbswap_ctrl(path->id)) &
(~(CFG_INTFRBSWAP_MASK));
tmp |= dsi_rbswap & CFG_INTFRBSWAP_MASK;
writel_relaxed(tmp, ctrl_regs(path) + intf_rbswap_ctrl(path->id));
writel_relaxed((mode->yres << 16) | mode->xres, &regs->screen_active);
writel_relaxed((mode->left_margin << 16) | mode->right_margin,
&regs->screen_h_porch);
@ -370,20 +388,12 @@ static void path_set_default(struct mmp_path *path)
* bus arbiter for faster read if not tv path;
* 2.enable horizontal smooth filter;
*/
if (PATH_PN == path->id) {
mask = CFG_GRA_HSMOOTH_MASK | CFG_DMA_HSMOOTH_MASK
| CFG_ARBFAST_ENA(1);
tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id));
tmp |= mask;
writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id));
} else if (PATH_TV == path->id) {
mask = CFG_GRA_HSMOOTH_MASK | CFG_DMA_HSMOOTH_MASK
| CFG_ARBFAST_ENA(1);
tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id));
tmp &= ~mask;
tmp |= CFG_GRA_HSMOOTH_MASK | CFG_DMA_HSMOOTH_MASK;
writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id));
}
mask = CFG_GRA_HSMOOTH_MASK | CFG_DMA_HSMOOTH_MASK | CFG_ARBFAST_ENA(1);
tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id));
tmp |= mask;
if (PATH_TV == path->id)
tmp &= ~CFG_ARBFAST_ENA(1);
writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id));
}
static int path_init(struct mmphw_path_plat *path_plat,
@ -419,6 +429,7 @@ static int path_init(struct mmphw_path_plat *path_plat,
path_plat->path = path;
path_plat->path_config = config->path_config;
path_plat->link_config = config->link_config;
path_plat->dsi_rbswap = config->dsi_rbswap;
path_set_default(path);
kfree(path_info);

5
drivers/video/mmp/hw/mmp_ctrl.h
View File

@ -163,6 +163,8 @@ struct lcd_regs {
#define LCD_SCLK(path) ((PATH_PN == path->id) ? LCD_CFG_SCLK_DIV :\
((PATH_TV == path->id) ? LCD_TCLK_DIV : LCD_PN2_SCLK_DIV))
#define intf_rbswap_ctrl(id) ((id) ? (((id) & 1) ? LCD_TVIF_CTRL : \
PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
/* dither configure */
#ifdef CONFIG_CPU_PXA988
@ -615,6 +617,8 @@ struct lcd_regs {
#define LCD_SPU_DUMB_CTRL 0x01B8
#define CFG_DUMBMODE(mode) ((mode)<<28)
#define CFG_DUMBMODE_MASK 0xF0000000
#define CFG_INTFRBSWAP(mode) ((mode)<<24)
#define CFG_INTFRBSWAP_MASK 0x0F000000
#define CFG_LCDGPIO_O(data) ((data)<<20)
#define CFG_LCDGPIO_O_MASK 0x0FF00000
#define CFG_LCDGPIO_ENA(gpio) ((gpio)<<12)
@ -1427,6 +1431,7 @@ struct mmphw_path_plat {
struct mmp_path *path;
u32 path_config;
u32 link_config;
u32 dsi_rbswap;
};
/* mmp ctrl describes mmp controller related info */

4
drivers/video/mx3fb.c
View File

@ -1354,7 +1354,7 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
struct device *dev = mx3fb->dev;
struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
const char *name = mx3fb_pdata->name;
unsigned int irq;
struct fb_info *fbi;
@ -1462,7 +1462,7 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
return false;
dev = rq->mx3fb->dev;
mx3fb_pdata = dev->platform_data;
mx3fb_pdata = dev_get_platdata(dev);
return rq->id == chan->chan_id &&
mx3fb_pdata->dma_dev == chan->device->dev;

9
drivers/video/neofb.c
View File

@ -2106,8 +2106,7 @@ static int neofb_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (err < 0)
goto err_reg_fb;
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
fb_info(info, "%s frame buffer device\n", info->fix.id);
/*
* Our driver data
@ -2148,12 +2147,6 @@ static void neofb_remove(struct pci_dev *dev)
fb_destroy_modedb(info->monspecs.modedb);
neo_unmap_mmio(info);
neo_free_fb_info(info);
/*
* Ensure that the driver data is no longer
* valid.
*/
pci_set_drvdata(dev, NULL);
}
}

9
drivers/video/nuc900fb.c
View File

@ -91,7 +91,7 @@ static int nuc900fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
struct nuc900fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
struct nuc900fb_display *display = NULL;
struct nuc900fb_display *default_display = mach_info->displays +
mach_info->default_display;
@ -358,7 +358,7 @@ static inline void modify_gpio(void __iomem *reg,
static int nuc900fb_init_registers(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
struct nuc900fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
void __iomem *regs = fbi->io;
/*reset the display engine*/
@ -512,7 +512,7 @@ static int nuc900fb_probe(struct platform_device *pdev)
int size;
dev_dbg(&pdev->dev, "devinit\n");
mach_info = pdev->dev.platform_data;
mach_info = dev_get_platdata(&pdev->dev);
if (mach_info == NULL) {
dev_err(&pdev->dev,
"no platform data for lcd, cannot attach\n");
@ -647,8 +647,7 @@ static int nuc900fb_probe(struct platform_device *pdev)
goto free_cpufreq;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fbinfo->node, fbinfo->fix.id);
fb_info(fbinfo, "%s frame buffer device\n", fbinfo->fix.id);
return 0;

2
drivers/video/nvidia/nv_hw.c
View File

@ -1300,7 +1300,7 @@ void NVLoadStateExt(struct nvidia_par *par, RIVA_HW_STATE * state)
break;
default:
break;
};
}
NV_WR32(par->PGRAPH, 0x0b38, 0x2ffff800);
NV_WR32(par->PGRAPH, 0x0b3c, 0x00006000);

3
drivers/video/offb.c
View File

@ -515,8 +515,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
if (register_framebuffer(info) < 0)
goto out_err;
printk(KERN_INFO "fb%d: Open Firmware frame buffer device on %s\n",
info->node, full_name);
fb_info(info, "Open Firmware frame buffer device on %s\n", full_name);
return;
out_err:

2
drivers/video/omap/hwa742.c
View File

@ -947,7 +947,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
hwa742.extif = fbdev->ext_if;
hwa742.int_ctrl = fbdev->int_ctrl;
omapfb_conf = fbdev->dev->platform_data;
omapfb_conf = dev_get_platdata(fbdev->dev);
hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");

Some files were not shown because too many files have changed in this diff Show More