[PATCH] sata_sis: Add support for SiS182 chipset
This patch adds support for the SiS182 sata chipset. This is a minimalistic version of the patch from http://bugme.osdl.org/show_bug.cgi?id=4192. Basically, it add the PCI IDs and handles the change of the 2nd port adress register. Signed-Off-By: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
parent
ca20aa6954
commit
f2c853bca5
|
@ -52,7 +52,10 @@ enum {
|
|||
/* PCI configuration registers */
|
||||
SIS_GENCTL = 0x54, /* IDE General Control register */
|
||||
SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */
|
||||
SIS_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
|
||||
SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
|
||||
SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */
|
||||
SIS_PMR = 0x90, /* port mapping register */
|
||||
SIS_PMR_COMBINED = 0x30,
|
||||
|
||||
/* random bits */
|
||||
SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */
|
||||
|
@ -67,6 +70,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|||
static struct pci_device_id sis_pci_tbl[] = {
|
||||
{ PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
|
||||
{ PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
|
||||
{ PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
|
||||
{ } /* terminate list */
|
||||
};
|
||||
|
||||
|
@ -139,56 +143,94 @@ MODULE_LICENSE("GPL");
|
|||
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
|
||||
static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device)
|
||||
{
|
||||
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
|
||||
|
||||
if (port_no)
|
||||
addr += SIS_SATA1_OFS;
|
||||
if (port_no)
|
||||
if (device == 0x182)
|
||||
addr += SIS182_SATA1_OFS;
|
||||
else
|
||||
addr += SIS180_SATA1_OFS;
|
||||
return addr;
|
||||
}
|
||||
|
||||
static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
|
||||
{
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
||||
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg);
|
||||
u32 val;
|
||||
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device);
|
||||
u32 val, val2;
|
||||
u8 pmr;
|
||||
|
||||
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
|
||||
return 0xffffffff;
|
||||
|
||||
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
||||
|
||||
pci_read_config_dword(pdev, cfg_addr, &val);
|
||||
return val;
|
||||
|
||||
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
|
||||
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
|
||||
|
||||
return val|val2;
|
||||
}
|
||||
|
||||
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
|
||||
{
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
||||
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr);
|
||||
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device);
|
||||
u8 pmr;
|
||||
|
||||
if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */
|
||||
return;
|
||||
|
||||
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
||||
|
||||
pci_write_config_dword(pdev, cfg_addr, val);
|
||||
|
||||
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
|
||||
pci_write_config_dword(pdev, cfg_addr+0x10, val);
|
||||
}
|
||||
|
||||
static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
||||
{
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
||||
u32 val,val2;
|
||||
u8 pmr;
|
||||
|
||||
if (sc_reg > SCR_CONTROL)
|
||||
return 0xffffffffU;
|
||||
|
||||
if (ap->flags & SIS_FLAG_CFGSCR)
|
||||
return sis_scr_cfg_read(ap, sc_reg);
|
||||
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
|
||||
|
||||
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
||||
|
||||
val = inl(ap->ioaddr.scr_addr + (sc_reg * 4));
|
||||
|
||||
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
|
||||
val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
|
||||
|
||||
return val|val2;
|
||||
}
|
||||
|
||||
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
||||
{
|
||||
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
||||
u8 pmr;
|
||||
|
||||
if (sc_reg > SCR_CONTROL)
|
||||
return;
|
||||
|
||||
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
||||
|
||||
if (ap->flags & SIS_FLAG_CFGSCR)
|
||||
sis_scr_cfg_write(ap, sc_reg, val);
|
||||
else
|
||||
else {
|
||||
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
|
||||
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
|
||||
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
|
||||
}
|
||||
}
|
||||
|
||||
/* move to PCI layer, integrate w/ MSI stuff */
|
||||
|
@ -210,6 +252,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
u32 genctl;
|
||||
struct ata_port_info *ppi;
|
||||
int pci_dev_busy = 0;
|
||||
u8 pmr;
|
||||
u8 port2_start;
|
||||
|
||||
rc = pci_enable_device(pdev);
|
||||
if (rc)
|
||||
|
@ -251,11 +295,27 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
probe_ent->host_flags |= SIS_FLAG_CFGSCR;
|
||||
}
|
||||
|
||||
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
||||
if (ent->device != 0x182) {
|
||||
if ((pmr & SIS_PMR_COMBINED) == 0) {
|
||||
printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
|
||||
port2_start=0x64;
|
||||
}
|
||||
else {
|
||||
printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");
|
||||
port2_start=0;
|
||||
}
|
||||
}
|
||||
else {
|
||||
printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n");
|
||||
port2_start = 0x20;
|
||||
}
|
||||
|
||||
if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) {
|
||||
probe_ent->port[0].scr_addr =
|
||||
pci_resource_start(pdev, SIS_SCR_PCI_BAR);
|
||||
probe_ent->port[1].scr_addr =
|
||||
pci_resource_start(pdev, SIS_SCR_PCI_BAR) + 64;
|
||||
pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start;
|
||||
}
|
||||
|
||||
pci_set_master(pdev);
|
||||
|
|
Loading…
Reference in a new issue