redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

mtd: nand: gpio: Convert to use GPIO descriptors

Browse source 
There is exactly one board in the kernel that defines platform data
for the GPIO NAND driver.

Use the feature to provide a lookup table for the GPIOs in the board
file so we can convert the driver as a whole to just use GPIO
descriptors.

After this we can cut the use of <linux/of_gpio.h> and use the GPIO
descriptor management from <linux/gpio/consumer.h> alone to grab and use
the GPIOs used in the driver.

I also created a local struct device *dev in the probe() function
because I was getting annoyed with all the &pdev->dev dereferencing.

Cc: arm@kernel.org
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Gerhard Sittig <gsi@denx.de>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jamie Iles <jamie.iles@oracle.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This commit is contained in:
Linus Walleij 2017-09-24 19:39:12 +02:00 committed by Boris Brezillon
parent e8901f3ab5
commit f3d0d8d938
3 changed files with 70 additions and 66 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
arch/arm/mach-pxa/cm-x255.c
View file

@ -14,7 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
#include <linux/gpio/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
@ -176,6 +176,17 @@ static inline void cmx255_init_nor(void) {}
#endif
#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
static struct gpiod_lookup_table cmx255_nand_gpiod_table = {
.dev_id = "gpio-nand",
.table = {
GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH),
},
};
static struct resource cmx255_nand_resource[] = {
[0] = {
.start = PXA_CS1_PHYS,
@ -198,11 +209,6 @@ static struct mtd_partition cmx255_nand_parts[] = {
};
static struct gpio_nand_platdata cmx255_nand_platdata = {
.gpio_nce = GPIO_NAND_CS,
.gpio_cle = GPIO_NAND_CLE,
.gpio_ale = GPIO_NAND_ALE,
.gpio_rdy = GPIO_NAND_RB,
.gpio_nwp = -1,
.parts = cmx255_nand_parts,
.num_parts = ARRAY_SIZE(cmx255_nand_parts),
.chip_delay = 25,
@ -220,6 +226,7 @@ static struct platform_device cmx255_nand = {
static void __init cmx255_init_nand(void)
{
gpiod_add_lookup_table(&cmx255_nand_gpiod_table);
platform_device_register(&cmx255_nand);
}
#else

112
drivers/mtd/nand/gpio.c
View file

@ -23,7 +23,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
@ -31,12 +31,16 @@
#include <linux/mtd/nand-gpio.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_gpio.h>
struct gpiomtd {
void __iomem *io_sync;
struct nand_chip nand_chip;
struct gpio_nand_platdata plat;
struct gpio_desc *nce; /* Optional chip enable */
struct gpio_desc *cle;
struct gpio_desc *ale;
struct gpio_desc *rdy;
struct gpio_desc *nwp; /* Optional write protection */
};
static inline struct gpiomtd *gpio_nand_getpriv(struct mtd_info *mtd)
@ -78,11 +82,10 @@ static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
gpio_nand_dosync(gpiomtd);
if (ctrl & NAND_CTRL_CHANGE) {
if (gpio_is_valid(gpiomtd->plat.gpio_nce))
gpio_set_value(gpiomtd->plat.gpio_nce,
!(ctrl & NAND_NCE));
gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
if (gpiomtd->nce)
gpiod_set_value(gpiomtd->nce, !(ctrl & NAND_NCE));
gpiod_set_value(gpiomtd->cle, !!(ctrl & NAND_CLE));
gpiod_set_value(gpiomtd->ale, !!(ctrl & NAND_ALE));
gpio_nand_dosync(gpiomtd);
}
if (cmd == NAND_CMD_NONE)
@ -96,7 +99,7 @@ static int gpio_nand_devready(struct mtd_info *mtd)
{
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
return gpio_get_value(gpiomtd->plat.gpio_rdy);
return gpiod_get_value(gpiomtd->rdy);
}
#ifdef CONFIG_OF
@ -123,12 +126,6 @@ static int gpio_nand_get_config_of(const struct device *dev,
}
}
plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
plat->gpio_nce = of_get_gpio(dev->of_node, 1);
plat->gpio_ale = of_get_gpio(dev->of_node, 2);
plat->gpio_cle = of_get_gpio(dev->of_node, 3);
plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
plat->chip_delay = val;
@ -201,10 +198,11 @@ static int gpio_nand_remove(struct platform_device *pdev)
nand_release(nand_to_mtd(&gpiomtd->nand_chip));
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
if (gpio_is_valid(gpiomtd->plat.gpio_nce))
gpio_set_value(gpiomtd->plat.gpio_nce, 1);
/* Enable write protection and disable the chip */
if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
gpiod_set_value(gpiomtd->nwp, 0);
if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
gpiod_set_value(gpiomtd->nce, 0);
return 0;
}
@ -215,66 +213,66 @@ static int gpio_nand_probe(struct platform_device *pdev)
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *res;
struct device *dev = &pdev->dev;
int ret = 0;
if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
if (!dev->of_node && !dev_get_platdata(dev))
return -EINVAL;
gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
gpiomtd = devm_kzalloc(dev, sizeof(*gpiomtd), GFP_KERNEL);
if (!gpiomtd)
return -ENOMEM;
chip = &gpiomtd->nand_chip;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
chip->IO_ADDR_R = devm_ioremap_resource(dev, res);
if (IS_ERR(chip->IO_ADDR_R))
return PTR_ERR(chip->IO_ADDR_R);
res = gpio_nand_get_io_sync(pdev);
if (res) {
gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
gpiomtd->io_sync = devm_ioremap_resource(dev, res);
if (IS_ERR(gpiomtd->io_sync))
return PTR_ERR(gpiomtd->io_sync);
}
ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
ret = gpio_nand_get_config(dev, &gpiomtd->plat);
if (ret)
return ret;
if (gpio_is_valid(gpiomtd->plat.gpio_nce)) {
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce,
"NAND NCE");
if (ret)
return ret;
gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
/* Just enable the chip */
gpiomtd->nce = devm_gpiod_get_optional(dev, "nce", GPIOD_OUT_HIGH);
if (IS_ERR(gpiomtd->nce))
return PTR_ERR(gpiomtd->nce);
/* We disable write protection once we know probe() will succeed */
gpiomtd->nwp = devm_gpiod_get_optional(dev, "nwp", GPIOD_OUT_LOW);
if (IS_ERR(gpiomtd->nwp)) {
ret = PTR_ERR(gpiomtd->nwp);
goto out_ce;
}
if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
"NAND NWP");
if (ret)
return ret;
gpiomtd->nwp = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW);
if (IS_ERR(gpiomtd->nwp)) {
ret = PTR_ERR(gpiomtd->nwp);
goto out_ce;
}
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
if (ret)
return ret;
gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
gpiomtd->cle = devm_gpiod_get(dev, "cle", GPIOD_OUT_LOW);
if (IS_ERR(gpiomtd->cle)) {
ret = PTR_ERR(gpiomtd->cle);
goto out_ce;
}
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
if (ret)
return ret;
gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
"NAND RDY");
if (ret)
return ret;
gpio_direction_input(gpiomtd->plat.gpio_rdy);
gpiomtd->rdy = devm_gpiod_get_optional(dev, "rdy", GPIOD_IN);
if (IS_ERR(gpiomtd->rdy)) {
ret = PTR_ERR(gpiomtd->rdy);
goto out_ce;
}
/* Using RDY pin */
if (gpiomtd->rdy)
chip->dev_ready = gpio_nand_devready;
}
nand_set_flash_node(chip, pdev->dev.of_node);
chip->IO_ADDR_W = chip->IO_ADDR_R;
@ -285,12 +283,13 @@ static int gpio_nand_probe(struct platform_device *pdev)
chip->cmd_ctrl = gpio_nand_cmd_ctrl;
mtd = nand_to_mtd(chip);
mtd->dev.parent = &pdev->dev;
mtd->dev.parent = dev;
platform_set_drvdata(pdev, gpiomtd);
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
/* Disable write protection, if wired up */
if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
gpiod_direction_output(gpiomtd->nwp, 1);
ret = nand_scan(mtd, 1);
if (ret)
@ -305,8 +304,11 @@ static int gpio_nand_probe(struct platform_device *pdev)
return 0;
err_wp:
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
gpiod_set_value(gpiomtd->nwp, 0);
out_ce:
if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
gpiod_set_value(gpiomtd->nce, 0);
return ret;
}

5
include/linux/mtd/nand-gpio.h
View file

@ -4,11 +4,6 @@
#include <linux/mtd/rawnand.h>
struct gpio_nand_platdata {
int gpio_nce;
int gpio_nwp;
int gpio_cle;
int gpio_ale;
int gpio_rdy;
void (*adjust_parts)(struct gpio_nand_platdata *, size_t);
struct mtd_partition *parts;
unsigned int num_parts;