ALSA: intel8x0: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
9c7f9abf62
commit
f493e7bcaa
|
@ -547,7 +547,8 @@ static int snd_intel8x0_codec_semaphore(struct intel8x0 *chip, unsigned int code
|
|||
/* access to some forbidden (non existent) ac97 registers will not
|
||||
* reset the semaphore. So even if you don't get the semaphore, still
|
||||
* continue the access. We don't need the semaphore anyway. */
|
||||
snd_printk(KERN_ERR "codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
|
||||
dev_err(chip->card->dev,
|
||||
"codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
|
||||
igetbyte(chip, ICHREG(ACC_SEMA)), igetdword(chip, ICHREG(GLOB_STA)));
|
||||
iagetword(chip, 0); /* clear semaphore flag */
|
||||
/* I don't care about the semaphore */
|
||||
|
@ -562,7 +563,9 @@ static void snd_intel8x0_codec_write(struct snd_ac97 *ac97,
|
|||
|
||||
if (snd_intel8x0_codec_semaphore(chip, ac97->num) < 0) {
|
||||
if (! chip->in_ac97_init)
|
||||
snd_printk(KERN_ERR "codec_write %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
|
||||
dev_err(chip->card->dev,
|
||||
"codec_write %d: semaphore is not ready for register 0x%x\n",
|
||||
ac97->num, reg);
|
||||
}
|
||||
iaputword(chip, reg + ac97->num * 0x80, val);
|
||||
}
|
||||
|
@ -576,7 +579,9 @@ static unsigned short snd_intel8x0_codec_read(struct snd_ac97 *ac97,
|
|||
|
||||
if (snd_intel8x0_codec_semaphore(chip, ac97->num) < 0) {
|
||||
if (! chip->in_ac97_init)
|
||||
snd_printk(KERN_ERR "codec_read %d: semaphore is not ready for register 0x%x\n", ac97->num, reg);
|
||||
dev_err(chip->card->dev,
|
||||
"codec_read %d: semaphore is not ready for register 0x%x\n",
|
||||
ac97->num, reg);
|
||||
res = 0xffff;
|
||||
} else {
|
||||
res = iagetword(chip, reg + ac97->num * 0x80);
|
||||
|
@ -585,7 +590,9 @@ static unsigned short snd_intel8x0_codec_read(struct snd_ac97 *ac97,
|
|||
iputdword(chip, ICHREG(GLOB_STA), tmp &
|
||||
~(chip->codec_ready_bits | ICH_GSCI));
|
||||
if (! chip->in_ac97_init)
|
||||
snd_printk(KERN_ERR "codec_read %d: read timeout for register 0x%x\n", ac97->num, reg);
|
||||
dev_err(chip->card->dev,
|
||||
"codec_read %d: read timeout for register 0x%x\n",
|
||||
ac97->num, reg);
|
||||
res = 0xffff;
|
||||
}
|
||||
}
|
||||
|
@ -619,7 +626,7 @@ static int snd_intel8x0_ali_codec_ready(struct intel8x0 *chip, int mask)
|
|||
return 0;
|
||||
}
|
||||
if (! chip->in_ac97_init)
|
||||
snd_printd(KERN_WARNING "intel8x0: AC97 codec ready timeout.\n");
|
||||
dev_warn(chip->card->dev, "AC97 codec ready timeout.\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
|
@ -631,7 +638,7 @@ static int snd_intel8x0_ali_codec_semaphore(struct intel8x0 *chip)
|
|||
while (--time && (igetdword(chip, ICHREG(ALI_CAS)) & ALI_CAS_SEM_BUSY))
|
||||
udelay(1);
|
||||
if (! time && ! chip->in_ac97_init)
|
||||
snd_printk(KERN_WARNING "ali_codec_semaphore timeout\n");
|
||||
dev_warn(chip->card->dev, "ali_codec_semaphore timeout\n");
|
||||
return snd_intel8x0_ali_codec_ready(chip, ALI_CSPSR_CODEC_READY);
|
||||
}
|
||||
|
||||
|
@ -700,7 +707,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich
|
|||
bdbar[idx + 1] = cpu_to_le32(0x80000000 | /* interrupt on completion */
|
||||
ichdev->fragsize >> ichdev->pos_shift);
|
||||
#if 0
|
||||
printk(KERN_DEBUG "bdbar[%i] = 0x%x [0x%x]\n",
|
||||
dev_dbg(chip->card->dev, "bdbar[%i] = 0x%x [0x%x]\n",
|
||||
idx + 0, bdbar[idx + 0], bdbar[idx + 1]);
|
||||
#endif
|
||||
}
|
||||
|
@ -712,8 +719,8 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich
|
|||
ichdev->lvi_frag = ICH_REG_LVI_MASK % ichdev->frags;
|
||||
ichdev->position = 0;
|
||||
#if 0
|
||||
printk(KERN_DEBUG "lvi_frag = %i, frags = %i, period_size = 0x%x, "
|
||||
"period_size1 = 0x%x\n",
|
||||
dev_dbg(chip->card->dev,
|
||||
"lvi_frag = %i, frags = %i, period_size = 0x%x, period_size1 = 0x%x\n",
|
||||
ichdev->lvi_frag, ichdev->frags, ichdev->fragsize,
|
||||
ichdev->fragsize1);
|
||||
#endif
|
||||
|
@ -781,8 +788,8 @@ static inline void snd_intel8x0_update(struct intel8x0 *chip, struct ichdev *ich
|
|||
ichdev->lvi_frag %= ichdev->frags;
|
||||
ichdev->bdbar[ichdev->lvi * 2] = cpu_to_le32(ichdev->physbuf + ichdev->lvi_frag * ichdev->fragsize1);
|
||||
#if 0
|
||||
printk(KERN_DEBUG "new: bdbar[%i] = 0x%x [0x%x], prefetch = %i, "
|
||||
"all = 0x%x, 0x%x\n",
|
||||
dev_dbg(chip->card->dev,
|
||||
"new: bdbar[%i] = 0x%x [0x%x], prefetch = %i, all = 0x%x, 0x%x\n",
|
||||
ichdev->lvi * 2, ichdev->bdbar[ichdev->lvi * 2],
|
||||
ichdev->bdbar[ichdev->lvi * 2 + 1], inb(ICH_REG_OFF_PIV + port),
|
||||
inl(port + 4), inb(port + ICH_REG_OFF_CR));
|
||||
|
@ -2289,7 +2296,8 @@ static int snd_intel8x0_mixer(struct intel8x0 *chip, int ac97_clock,
|
|||
ac97.num = i;
|
||||
if ((err = snd_ac97_mixer(pbus, &ac97, &chip->ac97[i])) < 0) {
|
||||
if (err != -EACCES)
|
||||
snd_printk(KERN_ERR "Unable to initialize codec #%d\n", i);
|
||||
dev_err(chip->card->dev,
|
||||
"Unable to initialize codec #%d\n", i);
|
||||
if (i == 0)
|
||||
goto __err;
|
||||
}
|
||||
|
@ -2441,7 +2449,7 @@ static int snd_intel8x0_ich_chip_reset(struct intel8x0 *chip)
|
|||
return 0;
|
||||
schedule_timeout_uninterruptible(1);
|
||||
} while (time_after_eq(end_time, jiffies));
|
||||
snd_printk(KERN_ERR "AC'97 warm reset still in progress? [0x%x]\n",
|
||||
dev_err(chip->card->dev, "AC'97 warm reset still in progress? [0x%x]\n",
|
||||
igetdword(chip, ICHREG(GLOB_CNT)));
|
||||
return -EIO;
|
||||
}
|
||||
|
@ -2483,7 +2491,8 @@ static int snd_intel8x0_ich_chip_init(struct intel8x0 *chip, int probing)
|
|||
} while (time_after_eq(end_time, jiffies));
|
||||
if (! status) {
|
||||
/* no codec is found */
|
||||
snd_printk(KERN_ERR "codec_ready: codec is not ready [0x%x]\n",
|
||||
dev_err(chip->card->dev,
|
||||
"codec_ready: codec is not ready [0x%x]\n",
|
||||
igetdword(chip, ICHREG(GLOB_STA)));
|
||||
return -EIO;
|
||||
}
|
||||
|
@ -2547,7 +2556,7 @@ static int snd_intel8x0_ali_chip_init(struct intel8x0 *chip, int probing)
|
|||
goto __ok;
|
||||
schedule_timeout_uninterruptible(1);
|
||||
}
|
||||
snd_printk(KERN_ERR "AC'97 reset failed.\n");
|
||||
dev_err(chip->card->dev, "AC'97 reset failed.\n");
|
||||
if (probing)
|
||||
return -EIO;
|
||||
|
||||
|
@ -2591,7 +2600,7 @@ static int snd_intel8x0_chip_init(struct intel8x0 *chip, int probing)
|
|||
break;
|
||||
}
|
||||
if (timeout == 0)
|
||||
printk(KERN_ERR "intel8x0: reset of registers failed?\n");
|
||||
dev_err(chip->card->dev, "reset of registers failed?\n");
|
||||
}
|
||||
/* initialize Buffer Descriptor Lists */
|
||||
for (i = 0; i < chip->bdbars_count; i++)
|
||||
|
@ -2692,8 +2701,7 @@ static int intel8x0_resume(struct device *dev)
|
|||
pci_set_power_state(pci, PCI_D0);
|
||||
pci_restore_state(pci);
|
||||
if (pci_enable_device(pci) < 0) {
|
||||
printk(KERN_ERR "intel8x0: pci_enable_device failed, "
|
||||
"disabling device\n");
|
||||
dev_err(dev, "pci_enable_device failed, disabling device\n");
|
||||
snd_card_disconnect(card);
|
||||
return -EIO;
|
||||
}
|
||||
|
@ -2701,8 +2709,8 @@ static int intel8x0_resume(struct device *dev)
|
|||
snd_intel8x0_chip_init(chip, 0);
|
||||
if (request_irq(pci->irq, snd_intel8x0_interrupt,
|
||||
IRQF_SHARED, KBUILD_MODNAME, chip)) {
|
||||
printk(KERN_ERR "intel8x0: unable to grab IRQ %d, "
|
||||
"disabling device\n", pci->irq);
|
||||
dev_err(dev, "unable to grab IRQ %d, disabling device\n",
|
||||
pci->irq);
|
||||
snd_card_disconnect(card);
|
||||
return -EIO;
|
||||
}
|
||||
|
@ -2779,7 +2787,8 @@ static void intel8x0_measure_ac97_clock(struct intel8x0 *chip)
|
|||
__again:
|
||||
subs = chip->pcm[0]->streams[0].substream;
|
||||
if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
|
||||
snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
|
||||
dev_warn(chip->card->dev,
|
||||
"no playback buffer allocated - aborting measure ac97 clock\n");
|
||||
return;
|
||||
}
|
||||
ichdev = &chip->ichd[ICHD_PCMOUT];
|
||||
|
@ -2789,7 +2798,8 @@ static void intel8x0_measure_ac97_clock(struct intel8x0 *chip)
|
|||
|
||||
/* set rate */
|
||||
if (snd_ac97_set_rate(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 48000) < 0) {
|
||||
snd_printk(KERN_ERR "cannot set ac97 rate: clock = %d\n", chip->ac97_bus->clock);
|
||||
dev_err(chip->card->dev, "cannot set ac97 rate: clock = %d\n",
|
||||
chip->ac97_bus->clock);
|
||||
return;
|
||||
}
|
||||
snd_intel8x0_setup_periods(chip, ichdev);
|
||||
|
@ -2843,7 +2853,8 @@ static void intel8x0_measure_ac97_clock(struct intel8x0 *chip)
|
|||
spin_unlock_irq(&chip->reg_lock);
|
||||
|
||||
if (pos == 0) {
|
||||
snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
|
||||
dev_err(chip->card->dev,
|
||||
"measure - unreliable DMA position..\n");
|
||||
__retry:
|
||||
if (attempt < 3) {
|
||||
msleep(300);
|
||||
|
@ -2857,16 +2868,17 @@ static void intel8x0_measure_ac97_clock(struct intel8x0 *chip)
|
|||
t = stop_time.tv_sec - start_time.tv_sec;
|
||||
t *= 1000000;
|
||||
t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
|
||||
printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
|
||||
dev_info(chip->card->dev,
|
||||
"%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
|
||||
if (t == 0) {
|
||||
snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
|
||||
dev_err(chip->card->dev, "?? calculation error..\n");
|
||||
goto __retry;
|
||||
}
|
||||
pos *= 1000;
|
||||
pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
|
||||
if (pos < 40000 || pos >= 60000) {
|
||||
/* abnormal value. hw problem? */
|
||||
printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
|
||||
dev_info(chip->card->dev, "measured clock %ld rejected\n", pos);
|
||||
goto __retry;
|
||||
} else if (pos > 40500 && pos < 41500)
|
||||
/* first exception - 41000Hz reference clock */
|
||||
|
@ -2878,7 +2890,7 @@ static void intel8x0_measure_ac97_clock(struct intel8x0 *chip)
|
|||
/* not 48000Hz, tuning the clock.. */
|
||||
chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
|
||||
__end:
|
||||
printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
|
||||
dev_info(chip->card->dev, "clocking to %d\n", chip->ac97_bus->clock);
|
||||
snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
|
||||
}
|
||||
|
||||
|
@ -2899,7 +2911,7 @@ static int intel8x0_in_clock_list(struct intel8x0 *chip)
|
|||
wl = snd_pci_quirk_lookup(pci, intel8x0_clock_list);
|
||||
if (!wl)
|
||||
return 0;
|
||||
printk(KERN_INFO "intel8x0: white list rate for %04x:%04x is %i\n",
|
||||
dev_info(chip->card->dev, "white list rate for %04x:%04x is %i\n",
|
||||
pci->subsystem_vendor, pci->subsystem_device, wl->value);
|
||||
chip->ac97_bus->clock = wl->value;
|
||||
return 1;
|
||||
|
@ -3003,7 +3015,7 @@ static int snd_intel8x0_inside_vm(struct pci_dev *pci)
|
|||
|
||||
fini:
|
||||
if (msg != NULL)
|
||||
printk(KERN_INFO "intel8x0: %s optimization\n", msg);
|
||||
dev_info(&pci->dev, "%s optimization\n", msg);
|
||||
|
||||
return result;
|
||||
}
|
||||
|
@ -3098,7 +3110,7 @@ static int snd_intel8x0_create(struct snd_card *card,
|
|||
else
|
||||
chip->addr = pci_iomap(pci, 0, 0);
|
||||
if (!chip->addr) {
|
||||
snd_printk(KERN_ERR "AC'97 space ioremap problem\n");
|
||||
dev_err(card->dev, "AC'97 space ioremap problem\n");
|
||||
snd_intel8x0_free(chip);
|
||||
return -EIO;
|
||||
}
|
||||
|
@ -3107,7 +3119,7 @@ static int snd_intel8x0_create(struct snd_card *card,
|
|||
else
|
||||
chip->bmaddr = pci_iomap(pci, 1, 0);
|
||||
if (!chip->bmaddr) {
|
||||
snd_printk(KERN_ERR "Controller space ioremap problem\n");
|
||||
dev_err(card->dev, "Controller space ioremap problem\n");
|
||||
snd_intel8x0_free(chip);
|
||||
return -EIO;
|
||||
}
|
||||
|
@ -3152,7 +3164,7 @@ static int snd_intel8x0_create(struct snd_card *card,
|
|||
chip->bdbars_count * sizeof(u32) * ICH_MAX_FRAGS * 2,
|
||||
&chip->bdbars) < 0) {
|
||||
snd_intel8x0_free(chip);
|
||||
snd_printk(KERN_ERR "intel8x0: cannot allocate buffer descriptors\n");
|
||||
dev_err(card->dev, "cannot allocate buffer descriptors\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
/* tables must be aligned to 8 bytes here, but the kernel pages
|
||||
|
@ -3206,7 +3218,7 @@ static int snd_intel8x0_create(struct snd_card *card,
|
|||
/* request irq after initializaing int_sta_mask, etc */
|
||||
if (request_irq(pci->irq, snd_intel8x0_interrupt,
|
||||
IRQF_SHARED, KBUILD_MODNAME, chip)) {
|
||||
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
|
||||
dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
|
||||
snd_intel8x0_free(chip);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
@ -3263,12 +3275,12 @@ static int check_default_spdif_aclink(struct pci_dev *pci)
|
|||
w = snd_pci_quirk_lookup(pci, spdif_aclink_defaults);
|
||||
if (w) {
|
||||
if (w->value)
|
||||
snd_printdd(KERN_INFO
|
||||
"intel8x0: Using SPDIF over AC-Link for %s\n",
|
||||
dev_dbg(&pci->dev,
|
||||
"Using SPDIF over AC-Link for %s\n",
|
||||
snd_pci_quirk_name(w));
|
||||
else
|
||||
snd_printdd(KERN_INFO
|
||||
"intel8x0: Using integrated SPDIF DMA for %s\n",
|
||||
dev_dbg(&pci->dev,
|
||||
"Using integrated SPDIF DMA for %s\n",
|
||||
snd_pci_quirk_name(w));
|
||||
return w->value;
|
||||
}
|
||||
|
|
Loading…
Reference in a new issue