clk: imx6: don't restrict LDB mux changes on QuadPlus
The LDB mux/gate layout has been fixed on QuadPlus, so there is no need to restrict the LDB mux changes on this hardware, as the erratum preventing this from working properly is gone. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit is contained in:
parent
3a1ba8ba67
commit
f4a0a6c309
|
@ -592,15 +592,20 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
|
|||
|
||||
imx6q_mmdc_ch1_mask_handshake(base);
|
||||
|
||||
/*
|
||||
* The LDB_DI0/1_SEL muxes are registered read-only due to a hardware
|
||||
* bug. Set the muxes to the requested values before registering the
|
||||
* ldb_di_sel clocks.
|
||||
*/
|
||||
init_ldb_clks(np, base);
|
||||
if (clk_on_imx6qp()) {
|
||||
clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
|
||||
clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
|
||||
} else {
|
||||
/*
|
||||
* The LDB_DI0/1_SEL muxes are registered read-only due to a hardware
|
||||
* bug. Set the muxes to the requested values before registering the
|
||||
* ldb_di_sel clocks.
|
||||
*/
|
||||
init_ldb_clks(np, base);
|
||||
|
||||
clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
|
||||
clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
|
||||
clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
|
||||
clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
|
||||
}
|
||||
clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
|
||||
clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
|
||||
clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
|
||||
|
|
Loading…
Reference in a new issue