cfg80211: keep track of supported interface modes

It is obviously good for userspace to know up front which
interface modes a given piece of hardware might support (even
if adding such an interface might fail later because of
concurrency issues), so let's make cfg80211 aware of that.
For good measure, disallow adding interfaces in all other
modes so drivers don't forget to announce support for one mode
when they add it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Luis R. Rodriguez 2008-08-29 16:26:43 -07:00 committed by John W. Linville
parent c6e387a214
commit f59ac04816
17 changed files with 95 additions and 3 deletions

View file

@ -1884,6 +1884,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000;
dev->max_signal = 100; /* FIXME: find better value */

View file

@ -485,6 +485,12 @@ ath5k_pci_probe(struct pci_dev *pdev,
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT);
hw->extra_tx_headroom = 2;
hw->channel_change_time = 5000;
sc = hw->priv;

View file

@ -1482,6 +1482,11 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
SET_IEEE80211_DEV(hw, &pdev->dev);
pci_set_drvdata(pdev, hw);

View file

@ -4569,6 +4569,13 @@ static int b43_wireless_init(struct ssb_device *dev)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_ADHOC);
hw->queues = b43_modparam_qos ? 4 : 1;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))

View file

@ -3704,6 +3704,11 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_ADHOC);
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))

View file

@ -819,6 +819,10 @@ int iwl_setup_mac(struct iwl_priv *priv)
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
/* queues to support 11n aggregation */

View file

@ -7888,6 +7888,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
/* 4 EDCA QOS priorities */
hw->queues = 4;

View file

@ -447,6 +447,9 @@ static int __init init_mac80211_hwsim(void)
hw->channel_change_time = 1;
hw->queues = 4;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP);
hw->ampdu_queues = 1;
memcpy(data->channels, hwsim_channels, sizeof(hwsim_channels));

View file

@ -1072,6 +1072,9 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000; /* TODO: find actual value */
dev->max_signal = 127;

View file

@ -1052,6 +1052,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
rt2x00dev->hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
/*
* Let the driver probe the device to detect the capabilities.
*/

View file

@ -1184,6 +1184,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
dev->max_signal = 65;
}
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
" info!\n");

View file

@ -937,6 +937,11 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DB;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_MESH_POINT) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
hw->max_signal = 100;
hw->queues = 1;
hw->extra_tx_headroom = sizeof(struct zd_ctrlset);

View file

@ -210,6 +210,10 @@ enum nl80211_commands {
* @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION)
*
* @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
* supported interface types, each a flag attribute with the number
* of the interface mode.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@ -259,6 +263,8 @@ enum nl80211_attrs {
NL80211_ATTR_HT_CAPABILITY,
NL80211_ATTR_SUPPORTED_IFTYPES,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,

View file

@ -185,6 +185,9 @@ struct wiphy {
/* permanent MAC address */
u8 perm_addr[ETH_ALEN];
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered

View file

@ -1675,6 +1675,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
}
}
/* if low-level driver supports AP, we also support VLAN */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
/* mac80211 always supports monitor */
local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
result = wiphy_register(local->hw.wiphy);
if (result < 0)
return result;

View file

@ -1,7 +1,7 @@
/*
* This is the linux wireless configuration interface.
*
* Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2006-2008 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/if.h>
@ -259,6 +259,13 @@ int wiphy_register(struct wiphy *wiphy)
struct ieee80211_supported_band *sband;
bool have_band = false;
int i;
u16 ifmodes = wiphy->interface_modes;
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
/* sanity check supported bands/channels */
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {

View file

@ -113,10 +113,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct nlattr *nl_bands, *nl_band;
struct nlattr *nl_freqs, *nl_freq;
struct nlattr *nl_rates, *nl_rate;
struct nlattr *nl_modes;
enum ieee80211_band band;
struct ieee80211_channel *chan;
struct ieee80211_rate *rate;
int i;
u16 ifmodes = dev->wiphy.interface_modes;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_WIPHY);
if (!hdr)
@ -125,6 +127,20 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->idx);
NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
if (!nl_modes)
goto nla_put_failure;
i = 0;
while (ifmodes) {
if (ifmodes & 1)
NLA_PUT_FLAG(msg, i);
ifmodes >>= 1;
i++;
}
nla_nest_end(msg, nl_modes);
nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
if (!nl_bands)
goto nla_put_failure;
@ -415,7 +431,8 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
ifindex = dev->ifindex;
dev_put(dev);
if (!drv->ops->change_virtual_intf) {
if (!drv->ops->change_virtual_intf ||
!(drv->wiphy.interface_modes & (1 << type))) {
err = -EOPNOTSUPP;
goto unlock;
}
@ -462,7 +479,8 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
if (IS_ERR(drv))
return PTR_ERR(drv);
if (!drv->ops->add_virtual_intf) {
if (!drv->ops->add_virtual_intf ||
!(drv->wiphy.interface_modes & (1 << type))) {
err = -EOPNOTSUPP;
goto unlock;
}