redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

crypto: omap-sham - correct dma burst size

Browse source 
Each cycle of SHA512 operates on 32 data words where as
SHA256 operates on 16 data words. This needs to be updated
while configuring DMA channels. Doing the same.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit is contained in:
Lokesh Vutla 2013-08-20 20:32:35 +05:30 committed by Herbert Xu
parent b8411ccd61
commit f5e4626097
1 changed files with 4 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
drivers/crypto/omap-sham.c
View file

@ -46,9 +46,6 @@
#define MD5_DIGEST_SIZE 16
#define DST_MAXBURST 16
#define DMA_MIN (DST_MAXBURST * sizeof(u32))
#define SHA_REG_IDIGEST(dd, x) ((dd)->pdata->idigest_ofs + ((x)*0x04))
#define SHA_REG_DIN(dd, x) ((dd)->pdata->din_ofs + ((x) * 0x04))
#define SHA_REG_DIGCNT(dd) ((dd)->pdata->digcnt_ofs)
@ -558,7 +555,7 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr,
struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req);
struct dma_async_tx_descriptor *tx;
struct dma_slave_config cfg;
int len32, ret;
int len32, ret, dma_min = get_block_size(ctx);
dev_dbg(dd->dev, "xmit_dma: digcnt: %d, length: %d, final: %d\n",
ctx->digcnt, length, final);
@ -567,7 +564,7 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr,
cfg.dst_addr = dd->phys_base + SHA_REG_DIN(dd, 0);
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.dst_maxburst = DST_MAXBURST;
cfg.dst_maxburst = dma_min / DMA_SLAVE_BUSWIDTH_4_BYTES;
ret = dmaengine_slave_config(dd->dma_lch, &cfg);
if (ret) {
@ -575,7 +572,7 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr,
return ret;
}
len32 = DIV_ROUND_UP(length, DMA_MIN) * DMA_MIN;
len32 = DIV_ROUND_UP(length, dma_min) * dma_min;
if (is_sg) {
/*
@ -729,7 +726,7 @@ static int omap_sham_update_dma_start(struct omap_sham_dev *dd)
* the dmaengine infrastructure will calculate that it needs
* to transfer 0 frames which ultimately fails.
*/
if (ctx->total < (DST_MAXBURST * sizeof(u32)))
if (ctx->total < get_block_size(ctx))
return omap_sham_update_dma_slow(dd);
dev_dbg(dd->dev, "fast: digcnt: %d, bufcnt: %u, total: %u\n",