redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

Browse source 
John W. Linville says:

====================
Please accept this batch of fixes intended for the 3.11 tree...

Alexey Khoroshilov fixes a suspend-related race in ath9k_htc.

Arnd Bergmann corrects the alignment of a structure in the ssb code
to be compatible with ARM devices.

Bob Copeland provides an ath5k fix that corrects a mistaken variable
initialization.

Felix Fietkau corrects some frame accounting for dropped frames
in ath9k.

Geert Uytterhoeven brings a Kconfig fix to indicate the DMA
requirements for rt2x00.

Larry Finger offers two rtlwifi fixes: one that properly initializes
a callback; and, a scattered collection of Kconfig, Makefile, and
EXPORT_SYMBOL changes that correct some build problems.

Finally, Sujith Manoharan provides an ath9k fix to disable a feature
on a specific hardware device.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2013-07-20 17:01:40 -07:00
parent 8d716c7a09 876fbb5d3e
commit f5f7ab6785
17 changed files with 195 additions and 113 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
drivers/net/wireless/ath/ath5k/mac80211-ops.c
View file

@ -325,7 +325,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw,
struct netdev_hw_addr *ha;
mfilt[0] = 0;
mfilt[1] = 1;
mfilt[1] = 0;
netdev_hw_addr_list_for_each(ha, mc_list) {
/* calculate XOR of eight 6-bit values */

10
drivers/net/wireless/ath/ath9k/ar5008_phy.c
View file

@ -610,7 +610,15 @@ static void ar5008_hw_override_ini(struct ath_hw *ah,
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
if (AR_SREV_9280_20_OR_LATER(ah)) {
val = REG_READ(ah, AR_PCU_MISC_MODE2);
/*
* For AR9280 and above, there is a new feature that allows
* Multicast search based on both MAC Address and Key ID.
* By default, this feature is enabled. But since the driver
* is not using this feature, we switch it off; otherwise
* multicast search based on MAC addr only will fail.
*/
val = REG_READ(ah, AR_PCU_MISC_MODE2) &
(~AR_ADHOC_MCAST_KEYID_ENABLE);
if (!AR_SREV_9271(ah))
val &= ~AR_PCU_MISC_MODE2_HWWAR1;

9
drivers/net/wireless/ath/ath9k/hif_usb.c
View file

@ -1082,7 +1082,7 @@ static void ath9k_hif_usb_firmware_fail(struct hif_device_usb *hif_dev)
struct device *dev = &hif_dev->udev->dev;
struct device *parent = dev->parent;
complete(&hif_dev->fw_done);
complete_all(&hif_dev->fw_done);
if (parent)
device_lock(parent);
@ -1131,7 +1131,7 @@ static void ath9k_hif_usb_firmware_cb(const struct firmware *fw, void *context)
release_firmware(fw);
hif_dev->flags |= HIF_USB_READY;
complete(&hif_dev->fw_done);
complete_all(&hif_dev->fw_done);
return;
@ -1316,7 +1316,10 @@ static int ath9k_hif_usb_suspend(struct usb_interface *interface,
if (!(hif_dev->flags & HIF_USB_START))
ath9k_htc_suspend(hif_dev->htc_handle);
ath9k_hif_usb_dealloc_urbs(hif_dev);
wait_for_completion(&hif_dev->fw_done);
if (hif_dev->flags & HIF_USB_READY)
ath9k_hif_usb_dealloc_urbs(hif_dev);
return 0;
}

44
drivers/net/wireless/ath/ath9k/xmit.c
View file

@ -146,6 +146,28 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta,
ARRAY_SIZE(bf->rates));
}
static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
struct sk_buff *skb)
{
int q;
q = skb_get_queue_mapping(skb);
if (txq == sc->tx.uapsdq)
txq = sc->tx.txq_map[q];
if (txq != sc->tx.txq_map[q])
return;
if (WARN_ON(--txq->pending_frames < 0))
txq->pending_frames = 0;
if (txq->stopped &&
txq->pending_frames < sc->tx.txq_max_pending[q]) {
ieee80211_wake_queue(sc->hw, q);
txq->stopped = false;
}
}
static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
{
struct ath_txq *txq = tid->ac->txq;
@ -167,6 +189,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
if (!bf) {
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
ath_txq_skb_done(sc, txq, skb);
ieee80211_free_txskb(sc->hw, skb);
continue;
}
@ -811,6 +834,7 @@ ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq,
if (!bf) {
__skb_unlink(skb, &tid->buf_q);
ath_txq_skb_done(sc, txq, skb);
ieee80211_free_txskb(sc->hw, skb);
continue;
}
@ -1824,6 +1848,7 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_txq *txq,
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
ath_txq_skb_done(sc, txq, skb);
ieee80211_free_txskb(sc->hw, skb);
return;
}
@ -2090,6 +2115,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
ath_txq_skb_done(sc, txq, skb);
if (txctl->paprd)
dev_kfree_skb_any(skb);
else
@ -2189,7 +2215,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
int q, padpos, padsize;
int padpos, padsize;
unsigned long flags;
ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
@ -2225,21 +2251,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
__skb_queue_tail(&txq->complete_q, skb);
q = skb_get_queue_mapping(skb);
if (txq == sc->tx.uapsdq)
txq = sc->tx.txq_map[q];
if (txq == sc->tx.txq_map[q]) {
if (WARN_ON(--txq->pending_frames < 0))
txq->pending_frames = 0;
if (txq->stopped &&
txq->pending_frames < sc->tx.txq_max_pending[q]) {
ieee80211_wake_queue(sc->hw, q);
txq->stopped = false;
}
}
ath_txq_skb_done(sc, txq, skb);
}
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,

2
drivers/net/wireless/rt2x00/Kconfig
View file

@ -1,6 +1,6 @@
menuconfig RT2X00
tristate "Ralink driver support"
depends on MAC80211
depends on MAC80211 && HAS_DMA
---help---
This will enable the support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.

154
drivers/net/wireless/rtlwifi/Kconfig
View file

@ -1,13 +1,91 @@
config RTLWIFI
tristate "Realtek wireless card support"
depends on MAC80211
select FW_LOADER
menuconfig RTL_CARDS
tristate "Realtek rtlwifi family of devices"
depends on MAC80211 && (PCI || USB)
default y
---help---
This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE
drivers. This module does nothing by itself - the various front-end
drivers need to be enabled to support any desired devices.
This option will enable support for the Realtek mac80211-based
wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
rtl8723eu, and rtl8188eu share some common code.
If you choose to build as a module, it'll be called rtlwifi.
if RTL_CARDS
config RTL8192CE
tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
depends on PCI
select RTL8192C_COMMON
select RTLWIFI
select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192ce
config RTL8192SE
tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192se
config RTL8192DE
tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192de
config RTL8723AE
tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8723AE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8723ae
config RTL8188EE
tristate "Realtek RTL8188EE Wireless Network Adapter"
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8188EE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8188ee
config RTL8192CU
tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
depends on USB
select RTLWIFI
select RTLWIFI_USB
select RTL8192C_COMMON
---help---
This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192cu
config RTLWIFI
tristate
select FW_LOADER
config RTLWIFI_PCI
tristate
config RTLWIFI_USB
tristate
config RTLWIFI_DEBUG
bool "Debugging output for rtlwifi driver family"
@ -18,63 +96,9 @@ config RTLWIFI_DEBUG
the front-end driver, this parameter must be "Y". For memory-limited
systems, choose "N". If in doubt, choose "Y".
config RTL8192CE
tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
depends on RTLWIFI && PCI
select RTL8192C_COMMON
---help---
This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192ce
config RTL8192SE
tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
depends on RTLWIFI && PCI
---help---
This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192se
config RTL8192DE
tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
depends on RTLWIFI && PCI
---help---
This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192de
config RTL8723AE
tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
depends on RTLWIFI && PCI
---help---
This is the driver for Realtek RTL8723AE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8723ae
config RTL8188EE
tristate "Realtek RTL8188EE Wireless Network Adapter"
depends on RTLWIFI && PCI
---help---
This is the driver for Realtek RTL8188EE 802.11n PCIe
wireless network adapters.
If you choose to build it as a module, it will be called rtl8188ee
config RTL8192CU
tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
depends on RTLWIFI && USB
select RTL8192C_COMMON
---help---
This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
wireless network adapters.
If you choose to build it as a module, it will be called rtl8192cu
config RTL8192C_COMMON
tristate
depends on RTL8192CE || RTL8192CU
default m
default y
endif

10
drivers/net/wireless/rtlwifi/Makefile
View file

@ -12,13 +12,11 @@ rtlwifi-objs := \
rtl8192c_common-objs += \
ifneq ($(CONFIG_PCI),)
rtlwifi-objs += pci.o
endif
obj-$(CONFIG_RTLWIFI_PCI) += rtl_pci.o
rtl_pci-objs := pci.o
ifneq ($(CONFIG_USB),)
rtlwifi-objs += usb.o
endif
obj-$(CONFIG_RTLWIFI_USB) += rtl_usb.o
rtl_usb-objs := usb.o
obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c/
obj-$(CONFIG_RTL8192CE) += rtl8192ce/

19
drivers/net/wireless/rtlwifi/base.c
View file

@ -172,6 +172,7 @@ u8 rtl_tid_to_ac(u8 tid)
{
return tid_to_ac[tid];
}
EXPORT_SYMBOL_GPL(rtl_tid_to_ac);
static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
struct ieee80211_sta_ht_cap *ht_cap)
@ -406,6 +407,7 @@ void rtl_deinit_deferred_work(struct ieee80211_hw *hw)
cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
cancel_delayed_work(&rtlpriv->works.fwevt_wq);
}
EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work);
void rtl_init_rfkill(struct ieee80211_hw *hw)
{
@ -439,6 +441,7 @@ void rtl_deinit_rfkill(struct ieee80211_hw *hw)
{
wiphy_rfkill_stop_polling(hw->wiphy);
}
EXPORT_SYMBOL_GPL(rtl_deinit_rfkill);
int rtl_init_core(struct ieee80211_hw *hw)
{
@ -489,10 +492,12 @@ int rtl_init_core(struct ieee80211_hw *hw)
return 0;
}
EXPORT_SYMBOL_GPL(rtl_init_core);
void rtl_deinit_core(struct ieee80211_hw *hw)
{
}
EXPORT_SYMBOL_GPL(rtl_deinit_core);
void rtl_init_rx_config(struct ieee80211_hw *hw)
{
@ -501,6 +506,7 @@ void rtl_init_rx_config(struct ieee80211_hw *hw)
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
}
EXPORT_SYMBOL_GPL(rtl_init_rx_config);
/*********************************************************
*
@ -879,6 +885,7 @@ bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb)
return true;
}
EXPORT_SYMBOL_GPL(rtl_tx_mgmt_proc);
void rtl_get_tcb_desc(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
@ -1052,6 +1059,7 @@ bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
return true;
}
EXPORT_SYMBOL_GPL(rtl_action_proc);
/*should call before software enc*/
u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
@ -1125,6 +1133,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
return false;
}
EXPORT_SYMBOL_GPL(rtl_is_special_data);
/*********************************************************
*
@ -1300,6 +1309,7 @@ void rtl_beacon_statistic(struct ieee80211_hw *hw, struct sk_buff *skb)
rtlpriv->link_info.bcn_rx_inperiod++;
}
EXPORT_SYMBOL_GPL(rtl_beacon_statistic);
void rtl_watchdog_wq_callback(void *data)
{
@ -1793,6 +1803,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len)
mac->vendor = vendor;
}
EXPORT_SYMBOL_GPL(rtl_recognize_peer);
/*********************************************************
*
@ -1849,6 +1860,7 @@ struct attribute_group rtl_attribute_group = {
.name = "rtlsysfs",
.attrs = rtl_sysfs_entries,
};
EXPORT_SYMBOL_GPL(rtl_attribute_group);
MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
@ -1856,7 +1868,8 @@ MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
struct rtl_global_var global_var = {};
struct rtl_global_var rtl_global_var = {};
EXPORT_SYMBOL_GPL(rtl_global_var);
static int __init rtl_core_module_init(void)
{
@ -1864,8 +1877,8 @@ static int __init rtl_core_module_init(void)
pr_err("Unable to register rtl_rc, use default RC !!\n");
/* init some global vars */
INIT_LIST_HEAD(&global_var.glb_priv_list);
spin_lock_init(&global_var.glb_list_lock);
INIT_LIST_HEAD(&rtl_global_var.glb_priv_list);
spin_lock_init(&rtl_global_var.glb_list_lock);
return 0;
}

2
drivers/net/wireless/rtlwifi/base.h
View file

@ -147,7 +147,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len);
u8 rtl_tid_to_ac(u8 tid);
extern struct attribute_group rtl_attribute_group;
void rtl_easy_concurrent_retrytimer_callback(unsigned long data);
extern struct rtl_global_var global_var;
extern struct rtl_global_var rtl_global_var;
int rtlwifi_rate_mapping(struct ieee80211_hw *hw,
bool isht, u8 desc_rate, bool first_ampdu);
bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);

1
drivers/net/wireless/rtlwifi/core.c
View file

@ -1330,3 +1330,4 @@ const struct ieee80211_ops rtl_ops = {
.rfkill_poll = rtl_op_rfkill_poll,
.flush = rtl_op_flush,
};
EXPORT_SYMBOL_GPL(rtl_ops);

1
drivers/net/wireless/rtlwifi/debug.c
View file

@ -51,3 +51,4 @@ void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
/*Init Debug flag enable condition */
}
EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init);

1
drivers/net/wireless/rtlwifi/efuse.c
View file

@ -229,6 +229,7 @@ void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf)
*pbuf = (u8) (value32 & 0xff);
}
EXPORT_SYMBOL_GPL(read_efuse_byte);
void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
{

22
drivers/net/wireless/rtlwifi/pci.c
View file

@ -35,6 +35,13 @@
#include "efuse.h"
#include <linux/export.h>
#include <linux/kmemleak.h>
#include <linux/module.h>
MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PCI basic driver for rtlwifi");
static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
PCI_VENDOR_ID_INTEL,
@ -1008,19 +1015,6 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
return;
}
static void rtl_lps_change_work_callback(struct work_struct *work)
{
struct rtl_works *rtlworks =
container_of(work, struct rtl_works, lps_change_work);
struct ieee80211_hw *hw = rtlworks->hw;
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (rtlpriv->enter_ps)
rtl_lps_enter(hw);
else
rtl_lps_leave(hw);
}
static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
@ -1899,7 +1893,7 @@ int rtl_pci_probe(struct pci_dev *pdev,
rtlpriv->rtlhal.interface = INTF_PCI;
rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
rtlpriv->intf_ops = &rtl_pci_ops;
rtlpriv->glb_var = &global_var;
rtlpriv->glb_var = &rtl_global_var;
/*
*init dbgp flags before all

16
drivers/net/wireless/rtlwifi/ps.c
View file

@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw *hw)
spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
}
EXPORT_SYMBOL_GPL(rtl_ips_nic_on);
/*for FW LPS*/
@ -518,6 +519,7 @@ void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len)
"u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
}
}
EXPORT_SYMBOL_GPL(rtl_swlps_beacon);
void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
{
@ -611,6 +613,19 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
}
void rtl_lps_change_work_callback(struct work_struct *work)
{
struct rtl_works *rtlworks =
container_of(work, struct rtl_works, lps_change_work);
struct ieee80211_hw *hw = rtlworks->hw;
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (rtlpriv->enter_ps)
rtl_lps_enter(hw);
else
rtl_lps_leave(hw);
}
EXPORT_SYMBOL_GPL(rtl_lps_change_work_callback);
void rtl_swlps_wq_callback(void *data)
{
@ -922,3 +937,4 @@ void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len)
else
rtl_p2p_noa_ie(hw, data, len - FCS_LEN);
}
EXPORT_SYMBOL_GPL(rtl_p2p_info);

1
drivers/net/wireless/rtlwifi/ps.h
View file

@ -49,5 +49,6 @@ void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
void rtl_lps_change_work_callback(struct work_struct *work);
#endif

9
drivers/net/wireless/rtlwifi/usb.c
View file

@ -32,6 +32,13 @@
#include "ps.h"
#include "rtl8192c/fw_common.h"
#include <linux/export.h>
#include <linux/module.h>
MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("USB basic driver for rtlwifi");
#define REALTEK_USB_VENQT_READ 0xC0
#define REALTEK_USB_VENQT_WRITE 0x40
@ -1070,6 +1077,8 @@ int rtl_usb_probe(struct usb_interface *intf,
spin_lock_init(&rtlpriv->locks.usb_lock);
INIT_WORK(&rtlpriv->works.fill_h2c_cmd,
rtl_fill_h2c_cmd_work_callback);
INIT_WORK(&rtlpriv->works.lps_change_work,
rtl_lps_change_work_callback);
rtlpriv->usb_data_index = 0;
init_completion(&rtlpriv->firmware_loading_complete);

5
include/linux/mod_devicetable.h
View file

@ -361,7 +361,8 @@ struct ssb_device_id {
__u16 vendor;
__u16 coreid;
__u8 revision;
};
__u8 __pad;
} __attribute__((packed, aligned(2)));
#define SSB_DEVICE(_vendor, _coreid, _revision) \
{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
#define SSB_DEVTABLE_END \
@ -377,7 +378,7 @@ struct bcma_device_id {
__u16 id;
__u8 rev;
__u8 class;
};
} __attribute__((packed,aligned(2)));
#define BCMA_CORE(_manuf, _id, _rev, _class) \
{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
#define BCMA_CORETABLE_END \