redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

staging: slicoss: Fixes block comment style

Browse source 
This patch fixes the checkpatch.pl warnings:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Amarjargal Gundjalam 2015-10-25 07:48:57 -07:00 committed by Greg Kroah-Hartman
parent 0d45ffcd64
commit f773a83479
3 changed files with 113 additions and 73 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

17
drivers/staging/slicoss/slic.h
View file

@ -93,10 +93,10 @@ struct slic_rcvbuf_info {
u32 lastid;
};
/*
SLIC Handle structure. Used to restrict handle values to
32 bits by using an index rather than an address.
Simplifies ucode in 64-bit systems
*/
* SLIC Handle structure. Used to restrict handle values to
* 32 bits by using an index rather than an address.
* Simplifies ucode in 64-bit systems
*/
struct slic_handle_word {
union {
struct {
@ -333,10 +333,11 @@ struct physcard {
struct physcard *next;
uint adapters_allocd;
/* the following is not currently needed
u32 bridge_busnum;
u32 bridge_cfg[NUM_CFG_SPACES][NUM_CFG_REG_ULONGS];
*/
/*
* the following is not currently needed
* u32 bridge_busnum;
* u32 bridge_cfg[NUM_CFG_SPACES][NUM_CFG_REG_ULONGS];
*/
};
struct base_driver {

38
drivers/staging/slicoss/slichw.h
View file

@ -307,9 +307,11 @@ struct slic_regs {
u32 slic_hbar; /* Header buffer address reg */
u32 pad4;
/* 31-8 - phy addr of set of contiguous hdr buffers
7-0 - number of buffers passed
Buffers are 256 bytes long on 256-byte boundaries. */
/*
* 31-8 - phy addr of set of contiguous hdr buffers
* 7-0 - number of buffers passed
* Buffers are 256 bytes long on 256-byte boundaries.
*/
#define SLIC_HBAR 0x0020
#define SLIC_HBAR_CNT_MSK 0x000000FF
@ -321,10 +323,12 @@ struct slic_regs {
#define SLIC_DBAR_SIZE 2048
u32 slic_cbar; /* Xmt Cmd buf addr regs.*/
/* 1 per XMT interface
31-5 - phy addr of host command buffer
4-0 - length of cmd in multiples of 32 bytes
Buffers are 32 bytes up to 512 bytes long */
/*
* 1 per XMT interface
* 31-5 - phy addr of host command buffer
* 4-0 - length of cmd in multiples of 32 bytes
* Buffers are 32 bytes up to 512 bytes long
*/
#define SLIC_CBAR 0x0030
#define SLIC_CBAR_LEN_MSK 0x0000001F
#define SLIC_CBAR_ALIGN 0x00000020
@ -336,9 +340,11 @@ struct slic_regs {
u32 slic_rbar; /* Response buffer address reg.*/
u32 pad7;
/*31-8 - phy addr of set of contiguous response buffers
7-0 - number of buffers passed
Buffers are 32 bytes long on 32-byte boundaries.*/
/*
* 31-8 - phy addr of set of contiguous response buffers
* 7-0 - number of buffers passed
* Buffers are 32 bytes long on 32-byte boundaries.
*/
#define SLIC_RBAR 0x0038
#define SLIC_RBAR_CNT_MSK 0x000000FF
#define SLIC_RBAR_SIZE 32
@ -430,7 +436,8 @@ struct slic_regs {
#define SLIC_LOW_POWER 0x00e0
u32 slic_quiesce; /* force slic into quiescent state
before soft reset */
* before soft reset
*/
u32 pad30;
#define SLIC_QUIESCE 0x00e8
@ -718,7 +725,8 @@ struct slic_eeprom {
u16 DSize2Pci; /* 15 DRAM size to PCI (bytes * 64K) */
u16 RSize2Pci; /* 16 ROM extension size to PCI (bytes * 4k) */
u8 NetIntPin1; /* 17 Network Interface Pin 1
(simba/leone only) */
* (simba/leone only)
*/
u8 NetIntPin2; /* Network Interface Pin 2 (simba/leone only)*/
union {
u8 NetIntPin3; /* 18 Network Interface Pin 3 (simba only) */
@ -748,7 +756,8 @@ struct slic_eeprom {
union oemfru OemFru; /* optional OEM FRU information */
u8 Pad[4]; /* Pad to 128 bytes - includes 2 cksum bytes
* (if OEM FRU info exists) and two unusable
* bytes at the end */
* bytes at the end
*/
};
/* SLIC EEPROM structure for Oasis */
@ -772,7 +781,8 @@ struct oslic_eeprom {
u16 FlashSize; /* 14 Flash size (bytes / 4K) */
u16 DSize2Pci; /* 15 DRAM size to PCI (bytes / 64K) */
u16 RSize2Pci; /* 16 Flash (ROM extension) size to PCI
(bytes / 4K) */
* (bytes / 4K)
*/
u16 DeviceId1; /* 17 Device Id (function 1) */
u16 DeviceId2; /* 18 Device Id (function 2) */
u16 CfgByte6; /* 19 Device Status Config Bytes 6-7 */

131
drivers/staging/slicoss/slicoss.c
View file

@ -158,11 +158,14 @@ static void slic_mcast_set_bit(struct adapter *adapter, char *address)
unsigned char crcpoly;
/* Get the CRC polynomial for the mac address */
/* we use bits 1-8 (lsb), bitwise reversed,
* msb (= lsb bit 0 before bitrev) is automatically discarded */
/*
* we use bits 1-8 (lsb), bitwise reversed,
* msb (= lsb bit 0 before bitrev) is automatically discarded
*/
crcpoly = ether_crc(ETH_ALEN, address) >> 23;
/* We only have space on the SLIC for 64 entries. Lop
/*
* We only have space on the SLIC for 64 entries. Lop
* off the top two bits. (2^6 = 64)
*/
crcpoly &= 0x3F;
@ -176,7 +179,8 @@ static void slic_mcast_set_mask(struct adapter *adapter)
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
/* Turn on all multicast addresses. We have to do this for
/*
* Turn on all multicast addresses. We have to do this for
* promiscuous mode as well as ALLMCAST mode. It saves the
* Microcode from having to keep state about the MAC
* configuration.
@ -185,7 +189,8 @@ static void slic_mcast_set_mask(struct adapter *adapter)
slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
FLUSH);
} else {
/* Commit our multicast mast to the SLIC by writing to the
/*
* Commit our multicast mast to the SLIC by writing to the
* multicast address mask registers
*/
slic_reg32_write(&slic_regs->slic_mcastlow,
@ -242,7 +247,8 @@ static void slic_link_config(struct adapter *adapter,
if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
/* We've got a fiber gigabit interface, and register
/*
* We've got a fiber gigabit interface, and register
* 4 is different in fiber mode than in copper mode
*/
@ -260,16 +266,22 @@ static void slic_link_config(struct adapter *adapter,
PCR_AUTONEG_RST));
slic_reg32_write(wphy, phy_config, FLUSH);
} else { /* forced 1000 Mb FD*/
/* power down phy to break link
this may not work) */
/*
* power down phy to break link
* this may not work)
*/
phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
slic_reg32_write(wphy, phy_config, FLUSH);
/* wait, Marvell says 1 sec,
try to get away with 10 ms */
/*
* wait, Marvell says 1 sec,
* try to get away with 10 ms
*/
mdelay(10);
/* disable auto-neg, set speed/duplex,
soft reset phy, powerup */
/*
* disable auto-neg, set speed/duplex,
* soft reset phy, powerup
*/
phy_config =
(MIICR_REG_PCR |
(PCR_RESET | PCR_SPEED_1000 |
@ -278,7 +290,8 @@ static void slic_link_config(struct adapter *adapter,
}
} else { /* copper gigabit */
/* Auto-Negotiate or 1000 Mb must be auto negotiated
/*
* Auto-Negotiate or 1000 Mb must be auto negotiated
* We've got a copper gigabit interface, and
* register 4 is different in copper mode than
* in fiber mode
@ -290,8 +303,10 @@ static void slic_link_config(struct adapter *adapter,
(PAR_ADV100FD | PAR_ADV100HD | PAR_ADV10FD
| PAR_ADV10HD));
} else {
/* linkspeed == LINK_1000MB -
don't advertise 10/100 Mb modes */
/*
* linkspeed == LINK_1000MB -
* don't advertise 10/100 Mb modes
*/
phy_advreg = MIICR_REG_4;
}
/* enable PAUSE frames */
@ -304,8 +319,10 @@ static void slic_link_config(struct adapter *adapter,
slic_reg32_write(wphy, phy_gctlreg, FLUSH);
if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
/* if a Marvell PHY
enable auto crossover */
/*
* if a Marvell PHY
* enable auto crossover
*/
phy_config =
(MIICR_REG_16 | (MRV_REG16_XOVERON));
slic_reg32_write(wphy, phy_config, FLUSH);
@ -336,8 +353,10 @@ static void slic_link_config(struct adapter *adapter,
duplex = PCR_DUPLEX_FULL;
if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
/* if a Marvell PHY
disable auto crossover */
/*
* if a Marvell PHY
* disable auto crossover
*/
phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
slic_reg32_write(wphy, phy_config, FLUSH);
}
@ -350,9 +369,11 @@ static void slic_link_config(struct adapter *adapter,
mdelay(10);
if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
/* if a Marvell PHY
disable auto-neg, set speed,
soft reset phy, powerup */
/*
* if a Marvell PHY
* disable auto-neg, set speed,
* soft reset phy, powerup
*/
phy_config =
(MIICR_REG_PCR | (PCR_RESET | speed | duplex));
slic_reg32_write(wphy, phy_config, FLUSH);
@ -529,11 +550,13 @@ static int slic_card_download(struct adapter *adapter)
index += 4;
/* Check SRAM location zero. If it is non-zero. Abort.*/
/* failure = readl((u32 __iomem *)&slic_regs->slic_reset);
if (failure) {
release_firmware(fw);
return -EIO;
}*/
/*
* failure = readl((u32 __iomem *)&slic_regs->slic_reset);
* if (failure) {
* release_firmware(fw);
* return -EIO;
* }
*/
}
}
release_firmware(fw);
@ -541,8 +564,10 @@ static int slic_card_download(struct adapter *adapter)
mdelay(10);
slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
/* stall for 20 ms, long enough for ucode to init card
and reach mainloop */
/*
* stall for 20 ms, long enough for ucode to init card
* and reach mainloop
*/
mdelay(20);
return 0;
@ -602,9 +627,11 @@ static void slic_mac_address_config(struct adapter *adapter)
slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
/* Write our multicast mask out to the card. This is done */
/* here in addition to the slic_mcast_addr_set routine */
/* because ALL_MCAST may have been enabled or disabled */
/*
* Write our multicast mask out to the card. This is done
* here in addition to the slic_mcast_addr_set routine
* because ALL_MCAST may have been enabled or disabled
*/
slic_mcast_set_mask(adapter);
}
@ -885,10 +912,10 @@ static void slic_upr_start(struct adapter *adapter)
struct slic_upr *upr;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
/*
char * ptr1;
char * ptr2;
uint cmdoffset;
*/
* char * ptr1;
* char * ptr2;
* uint cmdoffset;
*/
upr = adapter->upr_list;
if (!upr)
return;
@ -2049,8 +2076,8 @@ static void slic_xmit_complete(struct adapter *adapter)
adapter->xmit_completes++;
adapter->card->events++;
/*
Get the complete host command buffer
*/
* Get the complete host command buffer
*/
slic_handle_word.handle_token = rspbuf->hosthandle;
hcmd =
adapter->slic_handles[slic_handle_word.handle_index].
@ -2758,10 +2785,12 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
oemfruformat = pOeeprom->OemFruFormat;
poemfru = &pOeeprom->OemFru;
macaddrs = 2;
/* Minor kludge for Oasis card
get 2 MAC addresses from the
EEPROM to ensure that function 1
gets the Port 1 MAC address */
/*
* Minor kludge for Oasis card
* get 2 MAC addresses from the
* EEPROM to ensure that function 1
* gets the Port 1 MAC address
*/
break;
default:
/* extract EEPROM data and pointers to EEPROM data */
@ -2784,14 +2813,14 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
ee_chksum =
*(u16 *)((char *)peeprom + (eecodesize - 2));
/*
calculate the EEPROM checksum
*/
* calculate the EEPROM checksum
*/
calc_chksum = slic_eeprom_cksum(peeprom,
eecodesize - 2);
/*
if the ucdoe chksum flag bit worked,
we wouldn't need this
*/
* if the ucdoe chksum flag bit worked,
* we wouldn't need this
*/
if (ee_chksum == calc_chksum)
card->config.EepromValid = true;
}
@ -2890,11 +2919,11 @@ static void slic_init_adapter(struct net_device *netdev,
adapter->card_size = 1;
/*
Initialize slic_handle array
*/
* Initialize slic_handle array
*/
/*
Start with 1. 0 is an invalid host handle.
*/
* Start with 1. 0 is an invalid host handle.
*/
for (index = 1, pslic_handle = &adapter->slic_handles[1];
index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {