regulator: s2mpa01: Don't check enable_shift before setting enable ramp rate
Current code misses updating the register when enable_shift is 0. e.g. S2MPA01_BUCK4_RAMP_EN_SHIFT is 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
parent
5481b348e8
commit
f7b1a8dc1c
|
@ -192,13 +192,11 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|||
if (!ramp_enable)
|
||||
goto ramp_disable;
|
||||
|
||||
if (enable_shift) {
|
||||
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
|
||||
1 << enable_shift, 1 << enable_shift);
|
||||
if (ret) {
|
||||
dev_err(&rdev->dev, "failed to enable ramp rate\n");
|
||||
return ret;
|
||||
}
|
||||
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
|
||||
1 << enable_shift, 1 << enable_shift);
|
||||
if (ret) {
|
||||
dev_err(&rdev->dev, "failed to enable ramp rate\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ramp_val = get_ramp_delay(ramp_delay);
|
||||
|
|
Loading…
Reference in a new issue