[ARM] pxa: move common MFP handling code into plat-pxa
Signed-off-by: Eric Miao <eric.miao@marvell.com>
This commit is contained in:
parent
38f539a608
commit
f8dec04d33
|
@ -1,7 +1,6 @@
|
||||||
#ifndef __ASM_ARCH_MFP_PXA25X_H
|
#ifndef __ASM_ARCH_MFP_PXA25X_H
|
||||||
#define __ASM_ARCH_MFP_PXA25X_H
|
#define __ASM_ARCH_MFP_PXA25X_H
|
||||||
|
|
||||||
#include <mach/mfp.h>
|
|
||||||
#include <mach/mfp-pxa2xx.h>
|
#include <mach/mfp-pxa2xx.h>
|
||||||
|
|
||||||
/* GPIO */
|
/* GPIO */
|
||||||
|
|
|
@ -8,7 +8,6 @@
|
||||||
* specific controller, and this should work in most cases.
|
* specific controller, and this should work in most cases.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <mach/mfp.h>
|
|
||||||
#include <mach/mfp-pxa2xx.h>
|
#include <mach/mfp-pxa2xx.h>
|
||||||
|
|
||||||
/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
|
/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
|
||||||
|
|
|
@ -1,7 +1,7 @@
|
||||||
#ifndef __ASM_ARCH_MFP_PXA2XX_H
|
#ifndef __ASM_ARCH_MFP_PXA2XX_H
|
||||||
#define __ASM_ARCH_MFP_PXA2XX_H
|
#define __ASM_ARCH_MFP_PXA2XX_H
|
||||||
|
|
||||||
#include <mach/mfp.h>
|
#include <plat/mfp.h>
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
|
* the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
|
||||||
|
|
|
@ -15,7 +15,6 @@
|
||||||
#ifndef __ASM_ARCH_MFP_PXA300_H
|
#ifndef __ASM_ARCH_MFP_PXA300_H
|
||||||
#define __ASM_ARCH_MFP_PXA300_H
|
#define __ASM_ARCH_MFP_PXA300_H
|
||||||
|
|
||||||
#include <mach/mfp.h>
|
|
||||||
#include <mach/mfp-pxa3xx.h>
|
#include <mach/mfp-pxa3xx.h>
|
||||||
|
|
||||||
/* GPIO */
|
/* GPIO */
|
||||||
|
|
|
@ -15,7 +15,6 @@
|
||||||
#ifndef __ASM_ARCH_MFP_PXA320_H
|
#ifndef __ASM_ARCH_MFP_PXA320_H
|
||||||
#define __ASM_ARCH_MFP_PXA320_H
|
#define __ASM_ARCH_MFP_PXA320_H
|
||||||
|
|
||||||
#include <mach/mfp.h>
|
|
||||||
#include <mach/mfp-pxa3xx.h>
|
#include <mach/mfp-pxa3xx.h>
|
||||||
|
|
||||||
/* GPIO */
|
/* GPIO */
|
||||||
|
|
|
@ -1,68 +1,9 @@
|
||||||
#ifndef __ASM_ARCH_MFP_PXA3XX_H
|
#ifndef __ASM_ARCH_MFP_PXA3XX_H
|
||||||
#define __ASM_ARCH_MFP_PXA3XX_H
|
#define __ASM_ARCH_MFP_PXA3XX_H
|
||||||
|
|
||||||
|
#include <plat/mfp.h>
|
||||||
|
|
||||||
#define MFPR_BASE (0x40e10000)
|
#define MFPR_BASE (0x40e10000)
|
||||||
#define MFPR_SIZE (PAGE_SIZE)
|
|
||||||
|
|
||||||
/* MFPR register bit definitions */
|
|
||||||
#define MFPR_PULL_SEL (0x1 << 15)
|
|
||||||
#define MFPR_PULLUP_EN (0x1 << 14)
|
|
||||||
#define MFPR_PULLDOWN_EN (0x1 << 13)
|
|
||||||
#define MFPR_SLEEP_SEL (0x1 << 9)
|
|
||||||
#define MFPR_SLEEP_OE_N (0x1 << 7)
|
|
||||||
#define MFPR_EDGE_CLEAR (0x1 << 6)
|
|
||||||
#define MFPR_EDGE_FALL_EN (0x1 << 5)
|
|
||||||
#define MFPR_EDGE_RISE_EN (0x1 << 4)
|
|
||||||
|
|
||||||
#define MFPR_SLEEP_DATA(x) ((x) << 8)
|
|
||||||
#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
|
|
||||||
#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
|
|
||||||
|
|
||||||
#define MFPR_EDGE_NONE (0)
|
|
||||||
#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
|
|
||||||
#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
|
|
||||||
#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Table that determines the low power modes outputs, with actual settings
|
|
||||||
* used in parentheses for don't-care values. Except for the float output,
|
|
||||||
* the configured driven and pulled levels match, so if there is a need for
|
|
||||||
* non-LPM pulled output, the same configuration could probably be used.
|
|
||||||
*
|
|
||||||
* Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
|
|
||||||
* (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
|
|
||||||
*
|
|
||||||
* Input 0 X(0) X(0) X(0) 0
|
|
||||||
* Drive 0 0 0 0 X(1) 0
|
|
||||||
* Drive 1 0 1 X(1) 0 0
|
|
||||||
* Pull hi (1) 1 X(1) 1 0 0
|
|
||||||
* Pull lo (0) 1 X(0) 0 1 0
|
|
||||||
* Z (float) 1 X(0) 0 0 0
|
|
||||||
*/
|
|
||||||
#define MFPR_LPM_INPUT (0)
|
|
||||||
#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
|
|
||||||
#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
|
|
||||||
#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
|
|
||||||
#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
|
|
||||||
#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
|
|
||||||
#define MFPR_LPM_MASK (0xe080)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* The pullup and pulldown state of the MFP pin at run mode is by default
|
|
||||||
* determined by the selected alternate function. In case that some buggy
|
|
||||||
* devices need to override this default behavior, the definitions below
|
|
||||||
* indicates the setting of corresponding MFPR bits
|
|
||||||
*
|
|
||||||
* Definition pull_sel pullup_en pulldown_en
|
|
||||||
* MFPR_PULL_NONE 0 0 0
|
|
||||||
* MFPR_PULL_LOW 1 0 1
|
|
||||||
* MFPR_PULL_HIGH 1 1 0
|
|
||||||
* MFPR_PULL_BOTH 1 1 1
|
|
||||||
*/
|
|
||||||
#define MFPR_PULL_NONE (0)
|
|
||||||
#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
|
|
||||||
#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
|
|
||||||
#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
|
|
||||||
|
|
||||||
/* PXA3xx common MFP configurations - processor specific ones defined
|
/* PXA3xx common MFP configurations - processor specific ones defined
|
||||||
* in mfp-pxa300.h and mfp-pxa320.h
|
* in mfp-pxa300.h and mfp-pxa320.h
|
||||||
|
@ -197,56 +138,21 @@
|
||||||
#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
|
#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
|
||||||
#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
|
#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
|
||||||
|
|
||||||
/*
|
/* NOTE: usage of these two functions is not recommended,
|
||||||
* each MFP pin will have a MFPR register, since the offset of the
|
* use pxa3xx_mfp_config() instead.
|
||||||
* register varies between processors, the processor specific code
|
|
||||||
* should initialize the pin offsets by pxa3xx_mfp_init_addr()
|
|
||||||
*
|
|
||||||
* pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
|
|
||||||
* structure, which represents a range of MFP pins from "start" to
|
|
||||||
* "end", with the offset begining at "offset", to define a single
|
|
||||||
* pin, let "end" = -1
|
|
||||||
*
|
|
||||||
* use
|
|
||||||
*
|
|
||||||
* MFP_ADDR_X() to define a range of pins
|
|
||||||
* MFP_ADDR() to define a single pin
|
|
||||||
* MFP_ADDR_END to signal the end of pin offset definitions
|
|
||||||
*/
|
*/
|
||||||
struct pxa3xx_mfp_addr_map {
|
static inline unsigned long pxa3xx_mfp_read(int mfp)
|
||||||
unsigned int start;
|
{
|
||||||
unsigned int end;
|
return mfp_read(mfp);
|
||||||
unsigned long offset;
|
}
|
||||||
};
|
|
||||||
|
|
||||||
#define MFP_ADDR_X(start, end, offset) \
|
static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
|
||||||
{ MFP_PIN_##start, MFP_PIN_##end, offset }
|
{
|
||||||
|
mfp_write(mfp, val);
|
||||||
|
}
|
||||||
|
|
||||||
#define MFP_ADDR(pin, offset) \
|
static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
|
||||||
{ MFP_PIN_##pin, -1, offset }
|
{
|
||||||
|
mfp_config(mfp_cfg, num);
|
||||||
#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
|
}
|
||||||
|
|
||||||
/*
|
|
||||||
* pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
|
|
||||||
* to the MFPR register
|
|
||||||
*/
|
|
||||||
unsigned long pxa3xx_mfp_read(int mfp);
|
|
||||||
void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* pxa3xx_mfp_config - configure the MFPR registers
|
|
||||||
*
|
|
||||||
* used by board specific initialization code
|
|
||||||
*/
|
|
||||||
void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
|
|
||||||
* index and MFPR register offset
|
|
||||||
*
|
|
||||||
* used by processor specific code
|
|
||||||
*/
|
|
||||||
void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
|
|
||||||
void __init pxa3xx_init_mfp(void);
|
|
||||||
#endif /* __ASM_ARCH_MFP_PXA3XX_H */
|
#endif /* __ASM_ARCH_MFP_PXA3XX_H */
|
||||||
|
|
|
@ -13,7 +13,6 @@
|
||||||
#ifndef __ASM_ARCH_MFP_PXA9xx_H
|
#ifndef __ASM_ARCH_MFP_PXA9xx_H
|
||||||
#define __ASM_ARCH_MFP_PXA9xx_H
|
#define __ASM_ARCH_MFP_PXA9xx_H
|
||||||
|
|
||||||
#include <mach/mfp.h>
|
|
||||||
#include <mach/mfp-pxa3xx.h>
|
#include <mach/mfp-pxa3xx.h>
|
||||||
|
|
||||||
/* GPIO */
|
/* GPIO */
|
||||||
|
|
|
@ -20,183 +20,9 @@
|
||||||
#include <linux/sysdev.h>
|
#include <linux/sysdev.h>
|
||||||
|
|
||||||
#include <mach/hardware.h>
|
#include <mach/hardware.h>
|
||||||
#include <mach/mfp.h>
|
|
||||||
#include <mach/mfp-pxa3xx.h>
|
#include <mach/mfp-pxa3xx.h>
|
||||||
#include <mach/pxa3xx-regs.h>
|
#include <mach/pxa3xx-regs.h>
|
||||||
|
|
||||||
/* mfp_spin_lock is used to ensure that MFP register configuration
|
|
||||||
* (most likely a read-modify-write operation) is atomic, and that
|
|
||||||
* mfp_table[] is consistent
|
|
||||||
*/
|
|
||||||
static DEFINE_SPINLOCK(mfp_spin_lock);
|
|
||||||
|
|
||||||
static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
|
|
||||||
|
|
||||||
struct pxa3xx_mfp_pin {
|
|
||||||
unsigned long config; /* -1 for not configured */
|
|
||||||
unsigned long mfpr_off; /* MFPRxx Register offset */
|
|
||||||
unsigned long mfpr_run; /* Run-Mode Register Value */
|
|
||||||
unsigned long mfpr_lpm; /* Low Power Mode Register Value */
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
|
|
||||||
|
|
||||||
/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
|
|
||||||
static const unsigned long mfpr_lpm[] = {
|
|
||||||
MFPR_LPM_INPUT,
|
|
||||||
MFPR_LPM_DRIVE_LOW,
|
|
||||||
MFPR_LPM_DRIVE_HIGH,
|
|
||||||
MFPR_LPM_PULL_LOW,
|
|
||||||
MFPR_LPM_PULL_HIGH,
|
|
||||||
MFPR_LPM_FLOAT,
|
|
||||||
};
|
|
||||||
|
|
||||||
/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
|
|
||||||
static const unsigned long mfpr_pull[] = {
|
|
||||||
MFPR_PULL_NONE,
|
|
||||||
MFPR_PULL_LOW,
|
|
||||||
MFPR_PULL_HIGH,
|
|
||||||
MFPR_PULL_BOTH,
|
|
||||||
};
|
|
||||||
|
|
||||||
/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
|
|
||||||
static const unsigned long mfpr_edge[] = {
|
|
||||||
MFPR_EDGE_NONE,
|
|
||||||
MFPR_EDGE_RISE,
|
|
||||||
MFPR_EDGE_FALL,
|
|
||||||
MFPR_EDGE_BOTH,
|
|
||||||
};
|
|
||||||
|
|
||||||
#define mfpr_readl(off) \
|
|
||||||
__raw_readl(mfpr_mmio_base + (off))
|
|
||||||
|
|
||||||
#define mfpr_writel(off, val) \
|
|
||||||
__raw_writel(val, mfpr_mmio_base + (off))
|
|
||||||
|
|
||||||
#define mfp_configured(p) ((p)->config != -1)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* perform a read-back of any MFPR register to make sure the
|
|
||||||
* previous writings are finished
|
|
||||||
*/
|
|
||||||
#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
|
|
||||||
|
|
||||||
static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
|
|
||||||
{
|
|
||||||
if (mfp_configured(p))
|
|
||||||
mfpr_writel(p->mfpr_off, p->mfpr_run);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
|
|
||||||
{
|
|
||||||
if (mfp_configured(p)) {
|
|
||||||
unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
|
|
||||||
if (mfpr_clr != p->mfpr_run)
|
|
||||||
mfpr_writel(p->mfpr_off, mfpr_clr);
|
|
||||||
if (p->mfpr_lpm != mfpr_clr)
|
|
||||||
mfpr_writel(p->mfpr_off, p->mfpr_lpm);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
|
|
||||||
{
|
|
||||||
unsigned long flags;
|
|
||||||
int i;
|
|
||||||
|
|
||||||
spin_lock_irqsave(&mfp_spin_lock, flags);
|
|
||||||
|
|
||||||
for (i = 0; i < num; i++, mfp_cfgs++) {
|
|
||||||
unsigned long tmp, c = *mfp_cfgs;
|
|
||||||
struct pxa3xx_mfp_pin *p;
|
|
||||||
int pin, af, drv, lpm, edge, pull;
|
|
||||||
|
|
||||||
pin = MFP_PIN(c);
|
|
||||||
BUG_ON(pin >= MFP_PIN_MAX);
|
|
||||||
p = &mfp_table[pin];
|
|
||||||
|
|
||||||
af = MFP_AF(c);
|
|
||||||
drv = MFP_DS(c);
|
|
||||||
lpm = MFP_LPM_STATE(c);
|
|
||||||
edge = MFP_LPM_EDGE(c);
|
|
||||||
pull = MFP_PULL(c);
|
|
||||||
|
|
||||||
/* run-mode pull settings will conflict with MFPR bits of
|
|
||||||
* low power mode state, calculate mfpr_run and mfpr_lpm
|
|
||||||
* individually if pull != MFP_PULL_NONE
|
|
||||||
*/
|
|
||||||
tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
|
|
||||||
|
|
||||||
if (likely(pull == MFP_PULL_NONE)) {
|
|
||||||
p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
|
|
||||||
p->mfpr_lpm = p->mfpr_run;
|
|
||||||
} else {
|
|
||||||
p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
|
|
||||||
p->mfpr_run = tmp | mfpr_pull[pull];
|
|
||||||
}
|
|
||||||
|
|
||||||
p->config = c; __mfp_config_run(p);
|
|
||||||
}
|
|
||||||
|
|
||||||
mfpr_sync();
|
|
||||||
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
|
||||||
}
|
|
||||||
|
|
||||||
unsigned long pxa3xx_mfp_read(int mfp)
|
|
||||||
{
|
|
||||||
unsigned long val, flags;
|
|
||||||
|
|
||||||
BUG_ON(mfp >= MFP_PIN_MAX);
|
|
||||||
|
|
||||||
spin_lock_irqsave(&mfp_spin_lock, flags);
|
|
||||||
val = mfpr_readl(mfp_table[mfp].mfpr_off);
|
|
||||||
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
|
||||||
|
|
||||||
return val;
|
|
||||||
}
|
|
||||||
|
|
||||||
void pxa3xx_mfp_write(int mfp, unsigned long val)
|
|
||||||
{
|
|
||||||
unsigned long flags;
|
|
||||||
|
|
||||||
BUG_ON(mfp >= MFP_PIN_MAX);
|
|
||||||
|
|
||||||
spin_lock_irqsave(&mfp_spin_lock, flags);
|
|
||||||
mfpr_writel(mfp_table[mfp].mfpr_off, val);
|
|
||||||
mfpr_sync();
|
|
||||||
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
|
||||||
}
|
|
||||||
|
|
||||||
void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
|
|
||||||
{
|
|
||||||
struct pxa3xx_mfp_addr_map *p;
|
|
||||||
unsigned long offset, flags;
|
|
||||||
int i;
|
|
||||||
|
|
||||||
spin_lock_irqsave(&mfp_spin_lock, flags);
|
|
||||||
|
|
||||||
for (p = map; p->start != MFP_PIN_INVALID; p++) {
|
|
||||||
offset = p->offset;
|
|
||||||
i = p->start;
|
|
||||||
|
|
||||||
do {
|
|
||||||
mfp_table[i].mfpr_off = offset;
|
|
||||||
mfp_table[i].mfpr_run = 0;
|
|
||||||
mfp_table[i].mfpr_lpm = 0;
|
|
||||||
offset += 4; i++;
|
|
||||||
} while ((i <= p->end) && (p->end != -1));
|
|
||||||
}
|
|
||||||
|
|
||||||
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
|
||||||
}
|
|
||||||
|
|
||||||
void __init pxa3xx_init_mfp(void)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
|
|
||||||
for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
|
|
||||||
mfp_table[i].config = -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef CONFIG_PM
|
#ifdef CONFIG_PM
|
||||||
/*
|
/*
|
||||||
* Configure the MFPs appropriately for suspend/resume.
|
* Configure the MFPs appropriately for suspend/resume.
|
||||||
|
@ -207,23 +33,13 @@ void __init pxa3xx_init_mfp(void)
|
||||||
*/
|
*/
|
||||||
static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
|
static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
|
||||||
{
|
{
|
||||||
int pin;
|
mfp_config_lpm();
|
||||||
|
|
||||||
for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
|
|
||||||
struct pxa3xx_mfp_pin *p = &mfp_table[pin];
|
|
||||||
__mfp_config_lpm(p);
|
|
||||||
}
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
static int pxa3xx_mfp_resume(struct sys_device *d)
|
static int pxa3xx_mfp_resume(struct sys_device *d)
|
||||||
{
|
{
|
||||||
int pin;
|
mfp_config_run();
|
||||||
|
|
||||||
for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
|
|
||||||
struct pxa3xx_mfp_pin *p = &mfp_table[pin];
|
|
||||||
__mfp_config_run(p);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* clear RDH bit when MFP settings are restored
|
/* clear RDH bit when MFP settings are restored
|
||||||
*
|
*
|
||||||
|
@ -231,7 +47,6 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
|
||||||
* preserve them here in case they will be referenced later
|
* preserve them here in case they will be referenced later
|
||||||
*/
|
*/
|
||||||
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
|
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
#else
|
#else
|
||||||
|
|
|
@ -23,7 +23,7 @@
|
||||||
#include "devices.h"
|
#include "devices.h"
|
||||||
#include "clock.h"
|
#include "clock.h"
|
||||||
|
|
||||||
static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
|
static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
|
||||||
|
|
||||||
MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
|
MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
|
||||||
MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
|
MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
|
||||||
|
@ -72,7 +72,7 @@ static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
|
||||||
};
|
};
|
||||||
|
|
||||||
/* override pxa300 MFP register addresses */
|
/* override pxa300 MFP register addresses */
|
||||||
static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
|
static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
|
||||||
MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
|
MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
|
||||||
MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
|
MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
|
||||||
|
|
||||||
|
@ -98,13 +98,13 @@ static struct clk_lookup pxa310_clkregs[] = {
|
||||||
static int __init pxa300_init(void)
|
static int __init pxa300_init(void)
|
||||||
{
|
{
|
||||||
if (cpu_is_pxa300() || cpu_is_pxa310()) {
|
if (cpu_is_pxa300() || cpu_is_pxa310()) {
|
||||||
pxa3xx_init_mfp();
|
mfp_init_base(io_p2v(MFPR_BASE));
|
||||||
pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
|
mfp_init_addr(pxa300_mfp_addr_map);
|
||||||
clks_register(ARRAY_AND_SIZE(common_clkregs));
|
clks_register(ARRAY_AND_SIZE(common_clkregs));
|
||||||
}
|
}
|
||||||
|
|
||||||
if (cpu_is_pxa310()) {
|
if (cpu_is_pxa310()) {
|
||||||
pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
|
mfp_init_addr(pxa310_mfp_addr_map);
|
||||||
clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
|
clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
@ -23,7 +23,7 @@
|
||||||
#include "devices.h"
|
#include "devices.h"
|
||||||
#include "clock.h"
|
#include "clock.h"
|
||||||
|
|
||||||
static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
|
static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
|
||||||
|
|
||||||
MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
|
MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
|
||||||
MFP_ADDR_X(GPIO5, GPIO9, 0x028C),
|
MFP_ADDR_X(GPIO5, GPIO9, 0x028C),
|
||||||
|
@ -86,8 +86,8 @@ static struct clk_lookup pxa320_clkregs[] = {
|
||||||
static int __init pxa320_init(void)
|
static int __init pxa320_init(void)
|
||||||
{
|
{
|
||||||
if (cpu_is_pxa320()) {
|
if (cpu_is_pxa320()) {
|
||||||
pxa3xx_init_mfp();
|
mfp_init_base(io_p2v(MFPR_BASE));
|
||||||
pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
|
mfp_init_addr(pxa320_mfp_addr_map);
|
||||||
clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
|
clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
@ -18,7 +18,7 @@
|
||||||
|
|
||||||
#include <mach/pxa930.h>
|
#include <mach/pxa930.h>
|
||||||
|
|
||||||
static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
|
static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
|
||||||
|
|
||||||
MFP_ADDR(GPIO0, 0x02e0),
|
MFP_ADDR(GPIO0, 0x02e0),
|
||||||
MFP_ADDR(GPIO1, 0x02dc),
|
MFP_ADDR(GPIO1, 0x02dc),
|
||||||
|
@ -179,8 +179,8 @@ static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
|
||||||
static int __init pxa930_init(void)
|
static int __init pxa930_init(void)
|
||||||
{
|
{
|
||||||
if (cpu_is_pxa930()) {
|
if (cpu_is_pxa930()) {
|
||||||
pxa3xx_init_mfp();
|
mfp_init_base(io_p2v(MFPR_BASE));
|
||||||
pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
|
mfp_init_addr(pxa930_mfp_addr_map);
|
||||||
}
|
}
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
|
|
|
@ -2,6 +2,6 @@
|
||||||
# Makefile for code common across different PXA processor families
|
# Makefile for code common across different PXA processor families
|
||||||
#
|
#
|
||||||
|
|
||||||
obj-y := dma.o
|
obj-y := dma.o mfp.o
|
||||||
|
|
||||||
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
|
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
|
||||||
|
|
369
arch/arm/plat-pxa/include/plat/mfp.h
Normal file
369
arch/arm/plat-pxa/include/plat/mfp.h
Normal file
|
@ -0,0 +1,369 @@
|
||||||
|
/*
|
||||||
|
* arch/arm/plat-pxa/include/plat/mfp.h
|
||||||
|
*
|
||||||
|
* Common Multi-Function Pin Definitions
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* 2007-8-21: eric miao <eric.miao@marvell.com>
|
||||||
|
* initial version
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __ASM_PLAT_MFP_H
|
||||||
|
#define __ASM_PLAT_MFP_H
|
||||||
|
|
||||||
|
#define mfp_to_gpio(m) ((m) % 128)
|
||||||
|
|
||||||
|
/* list of all the configurable MFP pins */
|
||||||
|
enum {
|
||||||
|
MFP_PIN_INVALID = -1,
|
||||||
|
|
||||||
|
MFP_PIN_GPIO0 = 0,
|
||||||
|
MFP_PIN_GPIO1,
|
||||||
|
MFP_PIN_GPIO2,
|
||||||
|
MFP_PIN_GPIO3,
|
||||||
|
MFP_PIN_GPIO4,
|
||||||
|
MFP_PIN_GPIO5,
|
||||||
|
MFP_PIN_GPIO6,
|
||||||
|
MFP_PIN_GPIO7,
|
||||||
|
MFP_PIN_GPIO8,
|
||||||
|
MFP_PIN_GPIO9,
|
||||||
|
MFP_PIN_GPIO10,
|
||||||
|
MFP_PIN_GPIO11,
|
||||||
|
MFP_PIN_GPIO12,
|
||||||
|
MFP_PIN_GPIO13,
|
||||||
|
MFP_PIN_GPIO14,
|
||||||
|
MFP_PIN_GPIO15,
|
||||||
|
MFP_PIN_GPIO16,
|
||||||
|
MFP_PIN_GPIO17,
|
||||||
|
MFP_PIN_GPIO18,
|
||||||
|
MFP_PIN_GPIO19,
|
||||||
|
MFP_PIN_GPIO20,
|
||||||
|
MFP_PIN_GPIO21,
|
||||||
|
MFP_PIN_GPIO22,
|
||||||
|
MFP_PIN_GPIO23,
|
||||||
|
MFP_PIN_GPIO24,
|
||||||
|
MFP_PIN_GPIO25,
|
||||||
|
MFP_PIN_GPIO26,
|
||||||
|
MFP_PIN_GPIO27,
|
||||||
|
MFP_PIN_GPIO28,
|
||||||
|
MFP_PIN_GPIO29,
|
||||||
|
MFP_PIN_GPIO30,
|
||||||
|
MFP_PIN_GPIO31,
|
||||||
|
MFP_PIN_GPIO32,
|
||||||
|
MFP_PIN_GPIO33,
|
||||||
|
MFP_PIN_GPIO34,
|
||||||
|
MFP_PIN_GPIO35,
|
||||||
|
MFP_PIN_GPIO36,
|
||||||
|
MFP_PIN_GPIO37,
|
||||||
|
MFP_PIN_GPIO38,
|
||||||
|
MFP_PIN_GPIO39,
|
||||||
|
MFP_PIN_GPIO40,
|
||||||
|
MFP_PIN_GPIO41,
|
||||||
|
MFP_PIN_GPIO42,
|
||||||
|
MFP_PIN_GPIO43,
|
||||||
|
MFP_PIN_GPIO44,
|
||||||
|
MFP_PIN_GPIO45,
|
||||||
|
MFP_PIN_GPIO46,
|
||||||
|
MFP_PIN_GPIO47,
|
||||||
|
MFP_PIN_GPIO48,
|
||||||
|
MFP_PIN_GPIO49,
|
||||||
|
MFP_PIN_GPIO50,
|
||||||
|
MFP_PIN_GPIO51,
|
||||||
|
MFP_PIN_GPIO52,
|
||||||
|
MFP_PIN_GPIO53,
|
||||||
|
MFP_PIN_GPIO54,
|
||||||
|
MFP_PIN_GPIO55,
|
||||||
|
MFP_PIN_GPIO56,
|
||||||
|
MFP_PIN_GPIO57,
|
||||||
|
MFP_PIN_GPIO58,
|
||||||
|
MFP_PIN_GPIO59,
|
||||||
|
MFP_PIN_GPIO60,
|
||||||
|
MFP_PIN_GPIO61,
|
||||||
|
MFP_PIN_GPIO62,
|
||||||
|
MFP_PIN_GPIO63,
|
||||||
|
MFP_PIN_GPIO64,
|
||||||
|
MFP_PIN_GPIO65,
|
||||||
|
MFP_PIN_GPIO66,
|
||||||
|
MFP_PIN_GPIO67,
|
||||||
|
MFP_PIN_GPIO68,
|
||||||
|
MFP_PIN_GPIO69,
|
||||||
|
MFP_PIN_GPIO70,
|
||||||
|
MFP_PIN_GPIO71,
|
||||||
|
MFP_PIN_GPIO72,
|
||||||
|
MFP_PIN_GPIO73,
|
||||||
|
MFP_PIN_GPIO74,
|
||||||
|
MFP_PIN_GPIO75,
|
||||||
|
MFP_PIN_GPIO76,
|
||||||
|
MFP_PIN_GPIO77,
|
||||||
|
MFP_PIN_GPIO78,
|
||||||
|
MFP_PIN_GPIO79,
|
||||||
|
MFP_PIN_GPIO80,
|
||||||
|
MFP_PIN_GPIO81,
|
||||||
|
MFP_PIN_GPIO82,
|
||||||
|
MFP_PIN_GPIO83,
|
||||||
|
MFP_PIN_GPIO84,
|
||||||
|
MFP_PIN_GPIO85,
|
||||||
|
MFP_PIN_GPIO86,
|
||||||
|
MFP_PIN_GPIO87,
|
||||||
|
MFP_PIN_GPIO88,
|
||||||
|
MFP_PIN_GPIO89,
|
||||||
|
MFP_PIN_GPIO90,
|
||||||
|
MFP_PIN_GPIO91,
|
||||||
|
MFP_PIN_GPIO92,
|
||||||
|
MFP_PIN_GPIO93,
|
||||||
|
MFP_PIN_GPIO94,
|
||||||
|
MFP_PIN_GPIO95,
|
||||||
|
MFP_PIN_GPIO96,
|
||||||
|
MFP_PIN_GPIO97,
|
||||||
|
MFP_PIN_GPIO98,
|
||||||
|
MFP_PIN_GPIO99,
|
||||||
|
MFP_PIN_GPIO100,
|
||||||
|
MFP_PIN_GPIO101,
|
||||||
|
MFP_PIN_GPIO102,
|
||||||
|
MFP_PIN_GPIO103,
|
||||||
|
MFP_PIN_GPIO104,
|
||||||
|
MFP_PIN_GPIO105,
|
||||||
|
MFP_PIN_GPIO106,
|
||||||
|
MFP_PIN_GPIO107,
|
||||||
|
MFP_PIN_GPIO108,
|
||||||
|
MFP_PIN_GPIO109,
|
||||||
|
MFP_PIN_GPIO110,
|
||||||
|
MFP_PIN_GPIO111,
|
||||||
|
MFP_PIN_GPIO112,
|
||||||
|
MFP_PIN_GPIO113,
|
||||||
|
MFP_PIN_GPIO114,
|
||||||
|
MFP_PIN_GPIO115,
|
||||||
|
MFP_PIN_GPIO116,
|
||||||
|
MFP_PIN_GPIO117,
|
||||||
|
MFP_PIN_GPIO118,
|
||||||
|
MFP_PIN_GPIO119,
|
||||||
|
MFP_PIN_GPIO120,
|
||||||
|
MFP_PIN_GPIO121,
|
||||||
|
MFP_PIN_GPIO122,
|
||||||
|
MFP_PIN_GPIO123,
|
||||||
|
MFP_PIN_GPIO124,
|
||||||
|
MFP_PIN_GPIO125,
|
||||||
|
MFP_PIN_GPIO126,
|
||||||
|
MFP_PIN_GPIO127,
|
||||||
|
MFP_PIN_GPIO0_2,
|
||||||
|
MFP_PIN_GPIO1_2,
|
||||||
|
MFP_PIN_GPIO2_2,
|
||||||
|
MFP_PIN_GPIO3_2,
|
||||||
|
MFP_PIN_GPIO4_2,
|
||||||
|
MFP_PIN_GPIO5_2,
|
||||||
|
MFP_PIN_GPIO6_2,
|
||||||
|
MFP_PIN_GPIO7_2,
|
||||||
|
MFP_PIN_GPIO8_2,
|
||||||
|
MFP_PIN_GPIO9_2,
|
||||||
|
MFP_PIN_GPIO10_2,
|
||||||
|
MFP_PIN_GPIO11_2,
|
||||||
|
MFP_PIN_GPIO12_2,
|
||||||
|
MFP_PIN_GPIO13_2,
|
||||||
|
MFP_PIN_GPIO14_2,
|
||||||
|
MFP_PIN_GPIO15_2,
|
||||||
|
MFP_PIN_GPIO16_2,
|
||||||
|
MFP_PIN_GPIO17_2,
|
||||||
|
|
||||||
|
MFP_PIN_ULPI_STP,
|
||||||
|
MFP_PIN_ULPI_NXT,
|
||||||
|
MFP_PIN_ULPI_DIR,
|
||||||
|
|
||||||
|
MFP_PIN_nXCVREN,
|
||||||
|
MFP_PIN_DF_CLE_nOE,
|
||||||
|
MFP_PIN_DF_nADV1_ALE,
|
||||||
|
MFP_PIN_DF_SCLK_E,
|
||||||
|
MFP_PIN_DF_SCLK_S,
|
||||||
|
MFP_PIN_nBE0,
|
||||||
|
MFP_PIN_nBE1,
|
||||||
|
MFP_PIN_DF_nADV2_ALE,
|
||||||
|
MFP_PIN_DF_INT_RnB,
|
||||||
|
MFP_PIN_DF_nCS0,
|
||||||
|
MFP_PIN_DF_nCS1,
|
||||||
|
MFP_PIN_nLUA,
|
||||||
|
MFP_PIN_nLLA,
|
||||||
|
MFP_PIN_DF_nWE,
|
||||||
|
MFP_PIN_DF_ALE_nWE,
|
||||||
|
MFP_PIN_DF_nRE_nOE,
|
||||||
|
MFP_PIN_DF_ADDR0,
|
||||||
|
MFP_PIN_DF_ADDR1,
|
||||||
|
MFP_PIN_DF_ADDR2,
|
||||||
|
MFP_PIN_DF_ADDR3,
|
||||||
|
MFP_PIN_DF_IO0,
|
||||||
|
MFP_PIN_DF_IO1,
|
||||||
|
MFP_PIN_DF_IO2,
|
||||||
|
MFP_PIN_DF_IO3,
|
||||||
|
MFP_PIN_DF_IO4,
|
||||||
|
MFP_PIN_DF_IO5,
|
||||||
|
MFP_PIN_DF_IO6,
|
||||||
|
MFP_PIN_DF_IO7,
|
||||||
|
MFP_PIN_DF_IO8,
|
||||||
|
MFP_PIN_DF_IO9,
|
||||||
|
MFP_PIN_DF_IO10,
|
||||||
|
MFP_PIN_DF_IO11,
|
||||||
|
MFP_PIN_DF_IO12,
|
||||||
|
MFP_PIN_DF_IO13,
|
||||||
|
MFP_PIN_DF_IO14,
|
||||||
|
MFP_PIN_DF_IO15,
|
||||||
|
|
||||||
|
/* additional pins on PXA930 */
|
||||||
|
MFP_PIN_GSIM_UIO,
|
||||||
|
MFP_PIN_GSIM_UCLK,
|
||||||
|
MFP_PIN_GSIM_UDET,
|
||||||
|
MFP_PIN_GSIM_nURST,
|
||||||
|
MFP_PIN_PMIC_INT,
|
||||||
|
MFP_PIN_RDY,
|
||||||
|
|
||||||
|
MFP_PIN_MAX,
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* a possible MFP configuration is represented by a 32-bit integer
|
||||||
|
*
|
||||||
|
* bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
|
||||||
|
* bit 10..12 - Alternate Function Selection
|
||||||
|
* bit 13..15 - Drive Strength
|
||||||
|
* bit 16..18 - Low Power Mode State
|
||||||
|
* bit 19..20 - Low Power Mode Edge Detection
|
||||||
|
* bit 21..22 - Run Mode Pull State
|
||||||
|
*
|
||||||
|
* to facilitate the definition, the following macros are provided
|
||||||
|
*
|
||||||
|
* MFP_CFG_DEFAULT - default MFP configuration value, with
|
||||||
|
* alternate function = 0,
|
||||||
|
* drive strength = fast 3mA (MFP_DS03X)
|
||||||
|
* low power mode = default
|
||||||
|
* edge detection = none
|
||||||
|
*
|
||||||
|
* MFP_CFG - default MFPR value with alternate function
|
||||||
|
* MFP_CFG_DRV - default MFPR value with alternate function and
|
||||||
|
* pin drive strength
|
||||||
|
* MFP_CFG_LPM - default MFPR value with alternate function and
|
||||||
|
* low power mode
|
||||||
|
* MFP_CFG_X - default MFPR value with alternate function,
|
||||||
|
* pin drive strength and low power mode
|
||||||
|
*/
|
||||||
|
|
||||||
|
typedef unsigned long mfp_cfg_t;
|
||||||
|
|
||||||
|
#define MFP_PIN(x) ((x) & 0x3ff)
|
||||||
|
|
||||||
|
#define MFP_AF0 (0x0 << 10)
|
||||||
|
#define MFP_AF1 (0x1 << 10)
|
||||||
|
#define MFP_AF2 (0x2 << 10)
|
||||||
|
#define MFP_AF3 (0x3 << 10)
|
||||||
|
#define MFP_AF4 (0x4 << 10)
|
||||||
|
#define MFP_AF5 (0x5 << 10)
|
||||||
|
#define MFP_AF6 (0x6 << 10)
|
||||||
|
#define MFP_AF7 (0x7 << 10)
|
||||||
|
#define MFP_AF_MASK (0x7 << 10)
|
||||||
|
#define MFP_AF(x) (((x) >> 10) & 0x7)
|
||||||
|
|
||||||
|
#define MFP_DS01X (0x0 << 13)
|
||||||
|
#define MFP_DS02X (0x1 << 13)
|
||||||
|
#define MFP_DS03X (0x2 << 13)
|
||||||
|
#define MFP_DS04X (0x3 << 13)
|
||||||
|
#define MFP_DS06X (0x4 << 13)
|
||||||
|
#define MFP_DS08X (0x5 << 13)
|
||||||
|
#define MFP_DS10X (0x6 << 13)
|
||||||
|
#define MFP_DS13X (0x7 << 13)
|
||||||
|
#define MFP_DS_MASK (0x7 << 13)
|
||||||
|
#define MFP_DS(x) (((x) >> 13) & 0x7)
|
||||||
|
|
||||||
|
#define MFP_LPM_DEFAULT (0x0 << 16)
|
||||||
|
#define MFP_LPM_DRIVE_LOW (0x1 << 16)
|
||||||
|
#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
|
||||||
|
#define MFP_LPM_PULL_LOW (0x3 << 16)
|
||||||
|
#define MFP_LPM_PULL_HIGH (0x4 << 16)
|
||||||
|
#define MFP_LPM_FLOAT (0x5 << 16)
|
||||||
|
#define MFP_LPM_INPUT (0x6 << 16)
|
||||||
|
#define MFP_LPM_STATE_MASK (0x7 << 16)
|
||||||
|
#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
|
||||||
|
|
||||||
|
#define MFP_LPM_EDGE_NONE (0x0 << 19)
|
||||||
|
#define MFP_LPM_EDGE_RISE (0x1 << 19)
|
||||||
|
#define MFP_LPM_EDGE_FALL (0x2 << 19)
|
||||||
|
#define MFP_LPM_EDGE_BOTH (0x3 << 19)
|
||||||
|
#define MFP_LPM_EDGE_MASK (0x3 << 19)
|
||||||
|
#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
|
||||||
|
|
||||||
|
#define MFP_PULL_NONE (0x0 << 21)
|
||||||
|
#define MFP_PULL_LOW (0x1 << 21)
|
||||||
|
#define MFP_PULL_HIGH (0x2 << 21)
|
||||||
|
#define MFP_PULL_BOTH (0x3 << 21)
|
||||||
|
#define MFP_PULL_MASK (0x3 << 21)
|
||||||
|
#define MFP_PULL(x) (((x) >> 21) & 0x3)
|
||||||
|
|
||||||
|
#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
|
||||||
|
MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
|
||||||
|
|
||||||
|
#define MFP_CFG(pin, af) \
|
||||||
|
((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
|
||||||
|
(MFP_PIN(MFP_PIN_##pin) | MFP_##af))
|
||||||
|
|
||||||
|
#define MFP_CFG_DRV(pin, af, drv) \
|
||||||
|
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
|
||||||
|
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
|
||||||
|
|
||||||
|
#define MFP_CFG_LPM(pin, af, lpm) \
|
||||||
|
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
|
||||||
|
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
|
||||||
|
|
||||||
|
#define MFP_CFG_X(pin, af, drv, lpm) \
|
||||||
|
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
|
||||||
|
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
|
||||||
|
|
||||||
|
#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
|
||||||
|
/*
|
||||||
|
* each MFP pin will have a MFPR register, since the offset of the
|
||||||
|
* register varies between processors, the processor specific code
|
||||||
|
* should initialize the pin offsets by mfp_init()
|
||||||
|
*
|
||||||
|
* mfp_init_base() - accepts a virtual base for all MFPR registers and
|
||||||
|
* initialize the MFP table to a default state
|
||||||
|
*
|
||||||
|
* mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
|
||||||
|
* represents a range of MFP pins from "start" to "end", with the offset
|
||||||
|
* begining at "offset", to define a single pin, let "end" = -1.
|
||||||
|
*
|
||||||
|
* use
|
||||||
|
*
|
||||||
|
* MFP_ADDR_X() to define a range of pins
|
||||||
|
* MFP_ADDR() to define a single pin
|
||||||
|
* MFP_ADDR_END to signal the end of pin offset definitions
|
||||||
|
*/
|
||||||
|
struct mfp_addr_map {
|
||||||
|
unsigned int start;
|
||||||
|
unsigned int end;
|
||||||
|
unsigned long offset;
|
||||||
|
};
|
||||||
|
|
||||||
|
#define MFP_ADDR_X(start, end, offset) \
|
||||||
|
{ MFP_PIN_##start, MFP_PIN_##end, offset }
|
||||||
|
|
||||||
|
#define MFP_ADDR(pin, offset) \
|
||||||
|
{ MFP_PIN_##pin, -1, offset }
|
||||||
|
|
||||||
|
#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
|
||||||
|
|
||||||
|
void __init mfp_init_base(unsigned long mfpr_base);
|
||||||
|
void __init mfp_init_addr(struct mfp_addr_map *map);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* mfp_{read, write}() - for direct read/write access to the MFPR register
|
||||||
|
* mfp_config() - for configuring a group of MFPR registers
|
||||||
|
* mfp_config_lpm() - configuring all low power MFPR registers for suspend
|
||||||
|
* mfp_config_run() - configuring all run time MFPR registers after resume
|
||||||
|
*/
|
||||||
|
unsigned long mfp_read(int mfp);
|
||||||
|
void mfp_write(int mfp, unsigned long mfpr_val);
|
||||||
|
void mfp_config(unsigned long *mfp_cfgs, int num);
|
||||||
|
void mfp_config_run(void);
|
||||||
|
void mfp_config_lpm(void);
|
||||||
|
#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
|
||||||
|
|
||||||
|
#endif /* __ASM_PLAT_MFP_H */
|
278
arch/arm/plat-pxa/mfp.c
Normal file
278
arch/arm/plat-pxa/mfp.c
Normal file
|
@ -0,0 +1,278 @@
|
||||||
|
/*
|
||||||
|
* linux/arch/arm/plat-pxa/mfp.c
|
||||||
|
*
|
||||||
|
* Multi-Function Pin Support
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 Marvell Internation Ltd.
|
||||||
|
*
|
||||||
|
* 2007-08-21: eric miao <eric.miao@marvell.com>
|
||||||
|
* initial version
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <linux/sysdev.h>
|
||||||
|
|
||||||
|
#include <plat/mfp.h>
|
||||||
|
|
||||||
|
#define MFPR_SIZE (PAGE_SIZE)
|
||||||
|
|
||||||
|
/* MFPR register bit definitions */
|
||||||
|
#define MFPR_PULL_SEL (0x1 << 15)
|
||||||
|
#define MFPR_PULLUP_EN (0x1 << 14)
|
||||||
|
#define MFPR_PULLDOWN_EN (0x1 << 13)
|
||||||
|
#define MFPR_SLEEP_SEL (0x1 << 9)
|
||||||
|
#define MFPR_SLEEP_OE_N (0x1 << 7)
|
||||||
|
#define MFPR_EDGE_CLEAR (0x1 << 6)
|
||||||
|
#define MFPR_EDGE_FALL_EN (0x1 << 5)
|
||||||
|
#define MFPR_EDGE_RISE_EN (0x1 << 4)
|
||||||
|
|
||||||
|
#define MFPR_SLEEP_DATA(x) ((x) << 8)
|
||||||
|
#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
|
||||||
|
#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
|
||||||
|
|
||||||
|
#define MFPR_EDGE_NONE (0)
|
||||||
|
#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
|
||||||
|
#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
|
||||||
|
#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Table that determines the low power modes outputs, with actual settings
|
||||||
|
* used in parentheses for don't-care values. Except for the float output,
|
||||||
|
* the configured driven and pulled levels match, so if there is a need for
|
||||||
|
* non-LPM pulled output, the same configuration could probably be used.
|
||||||
|
*
|
||||||
|
* Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
|
||||||
|
* (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
|
||||||
|
*
|
||||||
|
* Input 0 X(0) X(0) X(0) 0
|
||||||
|
* Drive 0 0 0 0 X(1) 0
|
||||||
|
* Drive 1 0 1 X(1) 0 0
|
||||||
|
* Pull hi (1) 1 X(1) 1 0 0
|
||||||
|
* Pull lo (0) 1 X(0) 0 1 0
|
||||||
|
* Z (float) 1 X(0) 0 0 0
|
||||||
|
*/
|
||||||
|
#define MFPR_LPM_INPUT (0)
|
||||||
|
#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
|
||||||
|
#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
|
||||||
|
#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
|
||||||
|
#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
|
||||||
|
#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
|
||||||
|
#define MFPR_LPM_MASK (0xe080)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The pullup and pulldown state of the MFP pin at run mode is by default
|
||||||
|
* determined by the selected alternate function. In case that some buggy
|
||||||
|
* devices need to override this default behavior, the definitions below
|
||||||
|
* indicates the setting of corresponding MFPR bits
|
||||||
|
*
|
||||||
|
* Definition pull_sel pullup_en pulldown_en
|
||||||
|
* MFPR_PULL_NONE 0 0 0
|
||||||
|
* MFPR_PULL_LOW 1 0 1
|
||||||
|
* MFPR_PULL_HIGH 1 1 0
|
||||||
|
* MFPR_PULL_BOTH 1 1 1
|
||||||
|
*/
|
||||||
|
#define MFPR_PULL_NONE (0)
|
||||||
|
#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
|
||||||
|
#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
|
||||||
|
#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
|
||||||
|
|
||||||
|
/* mfp_spin_lock is used to ensure that MFP register configuration
|
||||||
|
* (most likely a read-modify-write operation) is atomic, and that
|
||||||
|
* mfp_table[] is consistent
|
||||||
|
*/
|
||||||
|
static DEFINE_SPINLOCK(mfp_spin_lock);
|
||||||
|
|
||||||
|
static void __iomem *mfpr_mmio_base;
|
||||||
|
|
||||||
|
struct mfp_pin {
|
||||||
|
unsigned long config; /* -1 for not configured */
|
||||||
|
unsigned long mfpr_off; /* MFPRxx Register offset */
|
||||||
|
unsigned long mfpr_run; /* Run-Mode Register Value */
|
||||||
|
unsigned long mfpr_lpm; /* Low Power Mode Register Value */
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mfp_pin mfp_table[MFP_PIN_MAX];
|
||||||
|
|
||||||
|
/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
|
||||||
|
static const unsigned long mfpr_lpm[] = {
|
||||||
|
MFPR_LPM_INPUT,
|
||||||
|
MFPR_LPM_DRIVE_LOW,
|
||||||
|
MFPR_LPM_DRIVE_HIGH,
|
||||||
|
MFPR_LPM_PULL_LOW,
|
||||||
|
MFPR_LPM_PULL_HIGH,
|
||||||
|
MFPR_LPM_FLOAT,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
|
||||||
|
static const unsigned long mfpr_pull[] = {
|
||||||
|
MFPR_PULL_NONE,
|
||||||
|
MFPR_PULL_LOW,
|
||||||
|
MFPR_PULL_HIGH,
|
||||||
|
MFPR_PULL_BOTH,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
|
||||||
|
static const unsigned long mfpr_edge[] = {
|
||||||
|
MFPR_EDGE_NONE,
|
||||||
|
MFPR_EDGE_RISE,
|
||||||
|
MFPR_EDGE_FALL,
|
||||||
|
MFPR_EDGE_BOTH,
|
||||||
|
};
|
||||||
|
|
||||||
|
#define mfpr_readl(off) \
|
||||||
|
__raw_readl(mfpr_mmio_base + (off))
|
||||||
|
|
||||||
|
#define mfpr_writel(off, val) \
|
||||||
|
__raw_writel(val, mfpr_mmio_base + (off))
|
||||||
|
|
||||||
|
#define mfp_configured(p) ((p)->config != -1)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* perform a read-back of any MFPR register to make sure the
|
||||||
|
* previous writings are finished
|
||||||
|
*/
|
||||||
|
#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
|
||||||
|
|
||||||
|
static inline void __mfp_config_run(struct mfp_pin *p)
|
||||||
|
{
|
||||||
|
if (mfp_configured(p))
|
||||||
|
mfpr_writel(p->mfpr_off, p->mfpr_run);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void __mfp_config_lpm(struct mfp_pin *p)
|
||||||
|
{
|
||||||
|
if (mfp_configured(p)) {
|
||||||
|
unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
|
||||||
|
if (mfpr_clr != p->mfpr_run)
|
||||||
|
mfpr_writel(p->mfpr_off, mfpr_clr);
|
||||||
|
if (p->mfpr_lpm != mfpr_clr)
|
||||||
|
mfpr_writel(p->mfpr_off, p->mfpr_lpm);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void mfp_config(unsigned long *mfp_cfgs, int num)
|
||||||
|
{
|
||||||
|
unsigned long flags;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mfp_spin_lock, flags);
|
||||||
|
|
||||||
|
for (i = 0; i < num; i++, mfp_cfgs++) {
|
||||||
|
unsigned long tmp, c = *mfp_cfgs;
|
||||||
|
struct mfp_pin *p;
|
||||||
|
int pin, af, drv, lpm, edge, pull;
|
||||||
|
|
||||||
|
pin = MFP_PIN(c);
|
||||||
|
BUG_ON(pin >= MFP_PIN_MAX);
|
||||||
|
p = &mfp_table[pin];
|
||||||
|
|
||||||
|
af = MFP_AF(c);
|
||||||
|
drv = MFP_DS(c);
|
||||||
|
lpm = MFP_LPM_STATE(c);
|
||||||
|
edge = MFP_LPM_EDGE(c);
|
||||||
|
pull = MFP_PULL(c);
|
||||||
|
|
||||||
|
/* run-mode pull settings will conflict with MFPR bits of
|
||||||
|
* low power mode state, calculate mfpr_run and mfpr_lpm
|
||||||
|
* individually if pull != MFP_PULL_NONE
|
||||||
|
*/
|
||||||
|
tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
|
||||||
|
|
||||||
|
if (likely(pull == MFP_PULL_NONE)) {
|
||||||
|
p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
|
||||||
|
p->mfpr_lpm = p->mfpr_run;
|
||||||
|
} else {
|
||||||
|
p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
|
||||||
|
p->mfpr_run = tmp | mfpr_pull[pull];
|
||||||
|
}
|
||||||
|
|
||||||
|
p->config = c; __mfp_config_run(p);
|
||||||
|
}
|
||||||
|
|
||||||
|
mfpr_sync();
|
||||||
|
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
||||||
|
}
|
||||||
|
|
||||||
|
unsigned long mfp_read(int mfp)
|
||||||
|
{
|
||||||
|
unsigned long val, flags;
|
||||||
|
|
||||||
|
BUG_ON(mfp >= MFP_PIN_MAX);
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mfp_spin_lock, flags);
|
||||||
|
val = mfpr_readl(mfp_table[mfp].mfpr_off);
|
||||||
|
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
||||||
|
|
||||||
|
return val;
|
||||||
|
}
|
||||||
|
|
||||||
|
void mfp_write(int mfp, unsigned long val)
|
||||||
|
{
|
||||||
|
unsigned long flags;
|
||||||
|
|
||||||
|
BUG_ON(mfp >= MFP_PIN_MAX);
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mfp_spin_lock, flags);
|
||||||
|
mfpr_writel(mfp_table[mfp].mfpr_off, val);
|
||||||
|
mfpr_sync();
|
||||||
|
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
||||||
|
}
|
||||||
|
|
||||||
|
void __init mfp_init_base(unsigned long mfpr_base)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/* initialize the table with default - unconfigured */
|
||||||
|
for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
|
||||||
|
mfp_table[i].config = -1;
|
||||||
|
|
||||||
|
mfpr_mmio_base = (void __iomem *)mfpr_base;
|
||||||
|
}
|
||||||
|
|
||||||
|
void __init mfp_init_addr(struct mfp_addr_map *map)
|
||||||
|
{
|
||||||
|
struct mfp_addr_map *p;
|
||||||
|
unsigned long offset, flags;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
spin_lock_irqsave(&mfp_spin_lock, flags);
|
||||||
|
|
||||||
|
for (p = map; p->start != MFP_PIN_INVALID; p++) {
|
||||||
|
offset = p->offset;
|
||||||
|
i = p->start;
|
||||||
|
|
||||||
|
do {
|
||||||
|
mfp_table[i].mfpr_off = offset;
|
||||||
|
mfp_table[i].mfpr_run = 0;
|
||||||
|
mfp_table[i].mfpr_lpm = 0;
|
||||||
|
offset += 4; i++;
|
||||||
|
} while ((i <= p->end) && (p->end != -1));
|
||||||
|
}
|
||||||
|
|
||||||
|
spin_unlock_irqrestore(&mfp_spin_lock, flags);
|
||||||
|
}
|
||||||
|
|
||||||
|
void mfp_config_lpm(void)
|
||||||
|
{
|
||||||
|
struct mfp_pin *p = &mfp_table[0];
|
||||||
|
int pin;
|
||||||
|
|
||||||
|
for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
|
||||||
|
__mfp_config_lpm(p);
|
||||||
|
}
|
||||||
|
|
||||||
|
void mfp_config_run(void)
|
||||||
|
{
|
||||||
|
struct mfp_pin *p = &mfp_table[0];
|
||||||
|
int pin;
|
||||||
|
|
||||||
|
for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
|
||||||
|
__mfp_config_run(p);
|
||||||
|
}
|
Loading…
Reference in a new issue