diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 790e6b0b8306..c052caad36e8 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -17,21 +17,23 @@ Further, syscon nodes that map platform-specific registers used for general system control is required: - compatible: "brcm,bcm-sun-top-ctrl", "syscon" - - compatible: "brcm,bcm-hif-cpubiuctrl", "syscon" + - compatible: "brcm,bcm-cpu-biu-ctrl", + "brcm,brcmstb-cpu-biu-ctrl", + "syscon" - compatible: "brcm,bcm-hif-continuation", "syscon" -hif-cpubiuctrl node +cpu-biu-ctrl node ------------------- -SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit -(BIU) block which controls and interfaces the CPU complex to the different -Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block -offers a feature called Write Pairing which consists in collapsing two adjacent -cache lines into a single (bursted) write transaction towards the memory -controller (MEMC) to maximize write bandwidth. +SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a +specific Bus Interface Unit (BIU) block which controls and interfaces the CPU +complex to the different Memory Controller Ports (MCP), one per memory +controller (MEMC). This BIU block offers a feature called Write Pairing which +consists in collapsing two adjacent cache lines into a single (bursted) write +transaction towards the memory controller (MEMC) to maximize write bandwidth. Required properties: - - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon" + - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon" Optional properties: @@ -52,7 +54,7 @@ example: }; hif_cpubiuctrl: syscon@3e2400 { - compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; + compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"; reg = <0x3e2400 0x5b4>; brcm,write-pairing; }; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index a0009b72e9be..f4a777039f03 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -169,6 +169,7 @@ described below. "arm,cortex-r5" "arm,cortex-r7" "brcm,brahma-b15" + "brcm,brahma-b53" "brcm,vulcan" "cavium,thunder" "cavium,thunder2" diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index 48bbb0c96835..2957a9ae291f 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -19,6 +19,7 @@ Required standard properties: - compatible shall be one of the following generic types: + "ti,sysc" "ti,sysc-omap2" "ti,sysc-omap4" "ti,sysc-omap4-simple" diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 152eeccbde1c..621b41c79faa 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -23,6 +23,13 @@ Required properties: the value shall be "emif" where is the number of the EMIF instance with base 1. +Required only for "ti,emif-am3352" and "ti,emif-am4372": +- sram : Phandles for generic sram driver nodes, + first should be type 'protect-exec' for the driver to use to copy + and run PM functions, second should be regular pool to be used for + data region for code. See Documentation/devicetree/bindings/sram/sram.txt + for more details. + Optional properties: - cs1-used : Have this property if CS1 of this EMIF instance has a memory part attached to it. If there is a memory @@ -44,7 +51,7 @@ Optional properties: - hw-caps-temp-alert : Have this property if the controller has capability for generating SDRAM temperature alerts -Example: +-Examples: emif1: emif@4c000000 { compatible = "ti,emif-4d"; @@ -56,3 +63,11 @@ emif1: emif@4c000000 { hw-caps-ll-interface; hw-caps-temp-alert; }; + +/* From am33xx.dtsi */ +emif: emif@4c000000 { + compatible = "ti,emif-am3352"; + reg = <0x4C000000 0x1000>; + sram = <&pm_sram_code + &pm_sram_data>; +}; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index e371b262d709..b31d6bbeee16 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -9,6 +9,7 @@ Required properties: - fsl,imx6q-gpc - fsl,imx6qp-gpc - fsl,imx6sl-gpc + - fsl,imx6sx-gpc - reg: should be register base and length as documented in the datasheet - interrupts: Should contain one interrupt specifier for the GPC interrupt @@ -29,6 +30,8 @@ Required properties: PU_DOMAIN 1 The following additional DOMAIN_INDEX value is valid for i.MX6SL: DISPLAY_DOMAIN 2 + The following additional DOMAIN_INDEX value is valid for i.MX6SX: + PCI_DOMAIN 3 - #power-domain-cells: Should be 0 diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt index e746b631793a..28ef6c295c76 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt @@ -5,7 +5,8 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset" +- compatible: Should be "amlogic,meson8b-reset", "amlogic,meson-gxbb-reset" or + "amlogic,meson-axg-reset". - reg: should contain the register address base - #reset-cells: 1, see below diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt index af9ca37221ce..a35af2dafdad 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt @@ -17,9 +17,15 @@ processor ID) and a string identifier. Value type: Definition: one entry specifying the smp2p notification interrupt -- qcom,ipc: +- mboxes: Usage: required Value type: + Definition: reference to the associated doorbell in APCS, as described + in mailbox/mailbox.txt + +- qcom,ipc: + Usage: required, unless mboxes is specified + Value type: Definition: three entries specifying the outgoing ipc bit used for signaling the remote end of the smp2p edge: - phandle to a syscon node representing the apcs registers diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt new file mode 100644 index 000000000000..6786d6715df0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt @@ -0,0 +1,31 @@ +LogicoreIP designed compatible with Xilinx ZYNQ family. +------------------------------------------------------- + +General concept +--------------- + +LogicoreIP design to provide the isolation between processing system +and programmable logic. Also provides the list of register set to configure +the frequency. + +Required properties: +- compatible: shall be one of: + "xlnx,vcu" + "xlnx,vcu-logicoreip-1.0" +- reg, reg-names: There are two sets of registers need to provide. + 1. vcu slcr + 2. Logicore + reg-names should contain name for the each register sequence. +- clocks: phandle for aclk and pll_ref clocksource +- clock-names: The identification string, "aclk", is always required for + the axi clock. "pll_ref" is required for pll. +Example: + + xlnx_vcu: vcu@a0040000 { + compatible = "xlnx,vcu-logicoreip-1.0"; + reg = <0x0 0xa0040000 0x0 0x1000>, + <0x0 0xa0041000 0x0 0x1000>; + reg-names = "vcu_slcr", "logicore"; + clocks = <&si570_1>, <&clkc 71>; + clock-names = "pll_ref", "aclk"; + }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index daa37a85dbf0..e4a420f16800 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1523,7 +1523,7 @@ }; target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_core"; reg = <0x4a0dd038 0x4>; reg-names = "sysc"; @@ -1542,7 +1542,7 @@ }; target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_mpu"; reg = <0x4a0d9038 0x4>; reg-names = "sysc"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2485496297e3..475904894b86 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -395,7 +395,7 @@ }; target-module@48076000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus2"; reg = <0x48076000 0x4>, <0x48076010 0x4>; @@ -475,7 +475,7 @@ }; target-module@4a0db000 { - compatible = "ti,sysc-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_iva"; reg = <0x4a0db038 0x4>; reg-names = "sysc"; @@ -498,7 +498,7 @@ }; target-module@4a0dd000 { - compatible = "ti,sysc-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_core"; reg = <0x4a0dd038 0x4>; reg-names = "sysc"; @@ -521,7 +521,7 @@ }; target-module@4a0d9000 { - compatible = "ti,sysc-sr"; + compatible = "ti,sysc-omap4-sr", "ti,sysc"; ti,hwmods = "smartreflex_mpu"; reg = <0x4a0d9038 0x4>; reg-names = "sysc"; @@ -747,7 +747,7 @@ }; target-module@52000000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "iss"; reg = <0x52000000 0x4>, <0x52000010 0x4>; @@ -866,7 +866,7 @@ }; target-module@40128000 { - compatible = "ti,sysc-mcasp"; + compatible = "ti,sysc-mcasp", "ti,sysc"; ti,hwmods = "mcasp"; reg = <0x40128000 0x4>, <0x40128004 0x4>; @@ -891,7 +891,7 @@ }; target-module@4012c000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus1"; reg = <0x4012c000 0x4>, <0x4012c010 0x4>; @@ -912,7 +912,7 @@ }; target-module@401f1000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "aess"; reg = <0x401f1000 0x4>, <0x401f1010 0x4>; @@ -1027,7 +1027,7 @@ }; target-module@4a10a000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "fdif"; reg = <0x4a10a000 0x4>, <0x4a10a010 0x4>; @@ -1266,7 +1266,7 @@ }; target-module@56000000 { - compatible = "ti,sysc-omap4"; + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "gpu"; reg = <0x5601fc00 0x4>, <0x5601fc10 0x4>; diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c index 07e3a86c6466..5f127d5f1045 100644 --- a/arch/arm/mach-bcm/brcmstb.c +++ b/arch/arm/mach-bcm/brcmstb.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -38,7 +37,6 @@ u32 brcmstb_uart_config[3] = { static void __init brcmstb_init_irq(void) { irqchip_init(); - brcmstb_biuctrl_init(); } static const char *const brcmstb_match[] __initconst = { diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 1cfe9aff4ac7..124f9af34a15 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -143,6 +143,8 @@ #include #include +#include + #include #include "clock.h" diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 903685252240..0b8e19f40402 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -37,9 +37,15 @@ struct omap_device; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; +extern struct sysc_regbits omap_hwmod_sysc_type1; +extern struct sysc_regbits omap_hwmod_sysc_type2; +extern struct sysc_regbits omap_hwmod_sysc_type3; +extern struct sysc_regbits omap34xx_sr_sysc_fields; +extern struct sysc_regbits omap36xx_sr_sysc_fields; +extern struct sysc_regbits omap3_sham_sysc_fields; +extern struct sysc_regbits omap3xxx_aes_sysc_fields; +extern struct sysc_regbits omap_hwmod_sysc_type_mcasp; +extern struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs; /* * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant @@ -284,26 +290,6 @@ struct omap_hwmod_ocp_if { #define CLOCKACT_TEST_ICLK 0x2 #define CLOCKACT_TEST_NONE 0x3 -/** - * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets. - * @midle_shift: Offset of the midle bit - * @clkact_shift: Offset of the clockactivity bit - * @sidle_shift: Offset of the sidle bit - * @enwkup_shift: Offset of the enawakeup bit - * @srst_shift: Offset of the softreset bit - * @autoidle_shift: Offset of the autoidle bit - * @dmadisable_shift: Offset of the dmadisable bit - */ -struct omap_hwmod_sysc_fields { - u8 midle_shift; - u8 clkact_shift; - u8 sidle_shift; - u8 enwkup_shift; - u8 srst_shift; - u8 autoidle_shift; - u8 dmadisable_shift; -}; - /** * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data * @rev_offs: IP block revision register offset (from module base addr) @@ -335,7 +321,7 @@ struct omap_hwmod_class_sysconfig { u32 sysc_offs; u32 syss_offs; u16 sysc_flags; - struct omap_hwmod_sysc_fields *sysc_fields; + struct sysc_regbits *sysc_fields; u8 srst_udelay; u8 idlemodes; }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c8baa57da062..1a2f2242e31b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1108,10 +1108,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { }; /* SR common */ -static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = { - .clkact_shift = 20, -}; - static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = { .sysc_offs = 0x24, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE), @@ -1124,11 +1120,6 @@ static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { .rev = 1, }; -static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = { - .sidle_shift = 24, - .enwkup_shift = 26, -}; - static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { .sysc_offs = 0x38, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), @@ -2607,12 +2598,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = { }; /* l4_core -> SHAM2 (SHA1/MD5) (similar to omap24xx) */ -static struct omap_hwmod_sysc_fields omap3_sham_sysc_fields = { - .sidle_shift = 4, - .srst_shift = 1, - .autoidle_shift = 0, -}; - static struct omap_hwmod_class_sysconfig omap3_sham_sysc = { .rev_offs = 0x5c, .sysc_offs = 0x60, @@ -2651,12 +2636,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = { }; /* l4_core -> AES */ -static struct omap_hwmod_sysc_fields omap3xxx_aes_sysc_fields = { - .sidle_shift = 6, - .srst_shift = 1, - .autoidle_shift = 0, -}; - static struct omap_hwmod_class_sysconfig omap3_aes_sysc = { .rev_offs = 0x44, .sysc_offs = 0x48, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c47709659a54..a1901c22a0f0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1658,10 +1658,6 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_mcasp = { - .sidle_shift = 0, -}; - static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = { .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, @@ -2403,17 +2399,12 @@ static struct omap_hwmod omap44xx_slimbus2_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = { - .sidle_shift = 24, - .enwkup_shift = 26, -}; - static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = { .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_smartreflex, + .sysc_fields = &omap36xx_sr_sysc_fields, }; static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = { @@ -2844,12 +2835,6 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_usb_host_fs = { - .midle_shift = 4, - .sidle_shift = 2, - .srst_shift = 1, -}; - static struct omap_hwmod_class_sysconfig omap44xx_usb_host_fs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0210, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index f33afcaec77e..4c2a05b1bd19 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2055,17 +2055,12 @@ static struct omap_hwmod dra7xx_sata_hwmod = { */ /* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = { - .sidle_shift = 24, - .enwkup_shift = 26, -}; - static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = { .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_smartreflex, + .sysc_fields = &omap36xx_sr_sysc_fields, }; static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 79d623b83e49..77c0b7618ea2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -16,6 +16,9 @@ * data and their integration with other OMAP modules and Linux. */ +#include +#include + #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" @@ -27,7 +30,7 @@ * if the device ip is compliant with the original PRCM protocol * defined for OMAP2420. */ -struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = { +struct sysc_regbits omap_hwmod_sysc_type1 = { .midle_shift = SYSC_TYPE1_MIDLEMODE_SHIFT, .clkact_shift = SYSC_TYPE1_CLOCKACTIVITY_SHIFT, .sidle_shift = SYSC_TYPE1_SIDLEMODE_SHIFT, @@ -43,7 +46,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = { * device ip is compliant with the new PRCM protocol defined for new * OMAP4 IPs. */ -struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { +struct sysc_regbits omap_hwmod_sysc_type2 = { .midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT, .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, @@ -54,7 +57,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme. * Used by some IPs on AM33xx */ -struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = { +struct sysc_regbits omap_hwmod_sysc_type3 = { .midle_shift = SYSC_TYPE3_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE3_SIDLEMODE_SHIFT, }; @@ -63,3 +66,34 @@ struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { .manager_count = 2, .has_framedonetv_irq = 0 }; + +struct sysc_regbits omap34xx_sr_sysc_fields = { + .clkact_shift = 20, +}; + +struct sysc_regbits omap36xx_sr_sysc_fields = { + .sidle_shift = 24, + .enwkup_shift = 26, +}; + +struct sysc_regbits omap3_sham_sysc_fields = { + .sidle_shift = 4, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +struct sysc_regbits omap3xxx_aes_sysc_fields = { + .sidle_shift = 6, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +struct sysc_regbits omap_hwmod_sysc_type_mcasp = { + .sidle_shift = 0, +}; + +struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs = { + .midle_shift = 4, + .sidle_shift = 2, + .srst_shift = 1, +}; diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 5012e3ad1225..b040447575ad 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -375,3 +375,8 @@ static void __exit omap_l3_exit(void) platform_driver_unregister(&omap_l3_driver); } module_exit(omap_l3_exit); + +MODULE_AUTHOR("Santosh Shilimkar"); +MODULE_AUTHOR("Sricharan R"); +MODULE_DESCRIPTION("OMAP L3 Interconnect error handling driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c index 360a5c0a4ee0..b853a729537a 100644 --- a/drivers/bus/omap_l3_smx.c +++ b/drivers/bus/omap_l3_smx.c @@ -309,3 +309,9 @@ static void __exit omap3_l3_exit(void) platform_driver_unregister(&omap3_l3_driver); } module_exit(omap3_l3_exit); + +MODULE_AUTHOR("Felipe Balbi"); +MODULE_AUTHOR("Santosh Shilimkar"); +MODULE_AUTHOR("Sricharan R"); +MODULE_DESCRIPTION("OMAP3XXX L3 Interconnect Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index c3c76a1ea8a8..4d46003c46cf 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -18,6 +18,9 @@ #include #include #include +#include + +#include enum sysc_registers { SYSC_REVISION, @@ -36,6 +39,9 @@ enum sysc_clocks { static const char * const clock_names[] = { "fck", "ick", }; +#define SYSC_IDLEMODE_MASK 3 +#define SYSC_CLOCKACTIVITY_MASK 3 + /** * struct sysc - TI sysc interconnect target module registers and capabilities * @dev: struct device pointer @@ -45,6 +51,10 @@ static const char * const clock_names[] = { "fck", "ick", }; * @offsets: register offsets from module base * @clocks: clocks used by the interconnect target module * @legacy_mode: configured for legacy mode if set + * @cap: interconnect target module capabilities + * @cfg: interconnect target module configuration + * @name: name if available + * @revision: interconnect target module revision */ struct sysc { struct device *dev; @@ -54,12 +64,34 @@ struct sysc { int offsets[SYSC_MAX_REGS]; struct clk *clocks[SYSC_MAX_CLOCKS]; const char *legacy_mode; + const struct sysc_capabilities *cap; + struct sysc_config cfg; + const char *name; + u32 revision; }; +static u32 sysc_read(struct sysc *ddata, int offset) +{ + if (ddata->cfg.quirks & SYSC_QUIRK_16BIT) { + u32 val; + + val = readw_relaxed(ddata->module_va + offset); + val |= (readw_relaxed(ddata->module_va + offset + 4) << 16); + + return val; + } + + return readl_relaxed(ddata->module_va + offset); +} + static u32 sysc_read_revision(struct sysc *ddata) { - return readl_relaxed(ddata->module_va + - ddata->offsets[SYSC_REVISION]); + int offset = ddata->offsets[SYSC_REVISION]; + + if (offset < 0) + return 0; + + return sysc_read(ddata, offset); } static int sysc_get_one_clock(struct sysc *ddata, @@ -206,6 +238,21 @@ static int sysc_check_children(struct sysc *ddata) return 0; } +/* + * So far only I2C uses 16-bit read access with clockactivity with revision + * in two registers with stride of 4. We can detect this based on the rev + * register size to configure things far enough to be able to properly read + * the revision register. + */ +static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res) +{ + if (resource_size(res) == 8) { + dev_dbg(ddata->dev, + "enabling 16-bit and clockactivity quirks\n"); + ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT; + } +} + /** * sysc_parse_one - parses the interconnect target module registers * @ddata: device driver data @@ -236,6 +283,8 @@ static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg) } ddata->offsets[reg] = res->start - ddata->module_pa; + if (reg == SYSC_REVISION) + sysc_check_quirk_16bit(ddata, res); return 0; } @@ -369,22 +418,12 @@ static int sysc_map_and_check_registers(struct sysc *ddata) */ static int sysc_show_rev(char *bufp, struct sysc *ddata) { - int error, len; + int len; if (ddata->offsets[SYSC_REVISION] < 0) return sprintf(bufp, ":NA"); - error = pm_runtime_get_sync(ddata->dev); - if (error < 0) { - pm_runtime_put_noidle(ddata->dev); - - return 0; - } - - len = sprintf(bufp, ":%08x", sysc_read_revision(ddata)); - - pm_runtime_mark_last_busy(ddata->dev); - pm_runtime_put_autosuspend(ddata->dev); + len = sprintf(bufp, ":%08x", ddata->revision); return len; } @@ -464,6 +503,151 @@ static const struct dev_pm_ops sysc_pm_ops = { NULL) }; +/* At this point the module is configured enough to read the revision */ +static int sysc_init_module(struct sysc *ddata) +{ + int error; + + error = pm_runtime_get_sync(ddata->dev); + if (error < 0) { + pm_runtime_put_noidle(ddata->dev); + + return 0; + } + ddata->revision = sysc_read_revision(ddata); + pm_runtime_put_sync(ddata->dev); + + return 0; +} + +static int sysc_init_sysc_mask(struct sysc *ddata) +{ + struct device_node *np = ddata->dev->of_node; + int error; + u32 val; + + error = of_property_read_u32(np, "ti,sysc-mask", &val); + if (error) + return 0; + + if (val) + ddata->cfg.sysc_val = val & ddata->cap->sysc_mask; + else + ddata->cfg.sysc_val = ddata->cap->sysc_mask; + + return 0; +} + +static int sysc_init_idlemode(struct sysc *ddata, u8 *idlemodes, + const char *name) +{ + struct device_node *np = ddata->dev->of_node; + struct property *prop; + const __be32 *p; + u32 val; + + of_property_for_each_u32(np, name, prop, p, val) { + if (val >= SYSC_NR_IDLEMODES) { + dev_err(ddata->dev, "invalid idlemode: %i\n", val); + return -EINVAL; + } + *idlemodes |= (1 << val); + } + + return 0; +} + +static int sysc_init_idlemodes(struct sysc *ddata) +{ + int error; + + error = sysc_init_idlemode(ddata, &ddata->cfg.midlemodes, + "ti,sysc-midle"); + if (error) + return error; + + error = sysc_init_idlemode(ddata, &ddata->cfg.sidlemodes, + "ti,sysc-sidle"); + if (error) + return error; + + return 0; +} + +/* + * Only some devices on omap4 and later have SYSCONFIG reset done + * bit. We can detect this if there is no SYSSTATUS at all, or the + * SYSTATUS bit 0 is not used. Note that some SYSSTATUS registers + * have multiple bits for the child devices like OHCI and EHCI. + * Depends on SYSC being parsed first. + */ +static int sysc_init_syss_mask(struct sysc *ddata) +{ + struct device_node *np = ddata->dev->of_node; + int error; + u32 val; + + error = of_property_read_u32(np, "ti,syss-mask", &val); + if (error) { + if ((ddata->cap->type == TI_SYSC_OMAP4 || + ddata->cap->type == TI_SYSC_OMAP4_TIMER) && + (ddata->cfg.sysc_val & SYSC_OMAP4_SOFTRESET)) + ddata->cfg.quirks |= SYSC_QUIRK_RESET_STATUS; + + return 0; + } + + if (!(val & 1) && (ddata->cfg.sysc_val & SYSC_OMAP4_SOFTRESET)) + ddata->cfg.quirks |= SYSC_QUIRK_RESET_STATUS; + + ddata->cfg.syss_mask = val; + + return 0; +} + +/* Device tree configured quirks */ +struct sysc_dts_quirk { + const char *name; + u32 mask; +}; + +static const struct sysc_dts_quirk sysc_dts_quirks[] = { + { .name = "ti,no-idle-on-init", + .mask = SYSC_QUIRK_NO_IDLE_ON_INIT, }, + { .name = "ti,no-reset-on-init", + .mask = SYSC_QUIRK_NO_RESET_ON_INIT, }, +}; + +static int sysc_init_dts_quirks(struct sysc *ddata) +{ + struct device_node *np = ddata->dev->of_node; + const struct property *prop; + int i, len, error; + u32 val; + + ddata->legacy_mode = of_get_property(np, "ti,hwmods", NULL); + + for (i = 0; i < ARRAY_SIZE(sysc_dts_quirks); i++) { + prop = of_get_property(np, sysc_dts_quirks[i].name, &len); + if (!prop) + break; + + ddata->cfg.quirks |= sysc_dts_quirks[i].mask; + } + + error = of_property_read_u32(np, "ti,sysc-delay-us", &val); + if (!error) { + if (val > 255) { + dev_warn(ddata->dev, "bad ti,sysc-delay-us: %i\n", + val); + } + + ddata->cfg.srst_udelay = (u8)val; + } + + return 0; +} + static void sysc_unprepare(struct sysc *ddata) { int i; @@ -474,9 +658,230 @@ static void sysc_unprepare(struct sysc *ddata) } } +/* + * Common sysc register bits found on omap2, also known as type1 + */ +static const struct sysc_regbits sysc_regbits_omap2 = { + .dmadisable_shift = -ENODEV, + .midle_shift = 12, + .sidle_shift = 3, + .clkact_shift = 8, + .emufree_shift = 5, + .enwkup_shift = 2, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +static const struct sysc_capabilities sysc_omap2 = { + .type = TI_SYSC_OMAP2, + .sysc_mask = SYSC_OMAP2_CLOCKACTIVITY | SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE, + .regbits = &sysc_regbits_omap2, +}; + +/* All omap2 and 3 timers, and timers 1, 2 & 10 on omap 4 and 5 */ +static const struct sysc_capabilities sysc_omap2_timer = { + .type = TI_SYSC_OMAP2_TIMER, + .sysc_mask = SYSC_OMAP2_CLOCKACTIVITY | SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE, + .regbits = &sysc_regbits_omap2, + .mod_quirks = SYSC_QUIRK_USE_CLOCKACT, +}; + +/* + * SHAM2 (SHA1/MD5) sysc found on omap3, a variant of sysc_regbits_omap2 + * with different sidle position + */ +static const struct sysc_regbits sysc_regbits_omap3_sham = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = 4, + .clkact_shift = -ENODEV, + .enwkup_shift = -ENODEV, + .srst_shift = 1, + .autoidle_shift = 0, + .emufree_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_omap3_sham = { + .type = TI_SYSC_OMAP3_SHAM, + .sysc_mask = SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE, + .regbits = &sysc_regbits_omap3_sham, +}; + +/* + * AES register bits found on omap3 and later, a variant of + * sysc_regbits_omap2 with different sidle position + */ +static const struct sysc_regbits sysc_regbits_omap3_aes = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = 6, + .clkact_shift = -ENODEV, + .enwkup_shift = -ENODEV, + .srst_shift = 1, + .autoidle_shift = 0, + .emufree_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_omap3_aes = { + .type = TI_SYSC_OMAP3_AES, + .sysc_mask = SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE, + .regbits = &sysc_regbits_omap3_aes, +}; + +/* + * Common sysc register bits found on omap4, also known as type2 + */ +static const struct sysc_regbits sysc_regbits_omap4 = { + .dmadisable_shift = 16, + .midle_shift = 4, + .sidle_shift = 2, + .clkact_shift = -ENODEV, + .enwkup_shift = -ENODEV, + .emufree_shift = 1, + .srst_shift = 0, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_omap4 = { + .type = TI_SYSC_OMAP4, + .sysc_mask = SYSC_OMAP4_DMADISABLE | SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET, + .regbits = &sysc_regbits_omap4, +}; + +static const struct sysc_capabilities sysc_omap4_timer = { + .type = TI_SYSC_OMAP4_TIMER, + .sysc_mask = SYSC_OMAP4_DMADISABLE | SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET, + .regbits = &sysc_regbits_omap4, +}; + +/* + * Common sysc register bits found on omap4, also known as type3 + */ +static const struct sysc_regbits sysc_regbits_omap4_simple = { + .dmadisable_shift = -ENODEV, + .midle_shift = 2, + .sidle_shift = 0, + .clkact_shift = -ENODEV, + .enwkup_shift = -ENODEV, + .srst_shift = -ENODEV, + .emufree_shift = -ENODEV, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_omap4_simple = { + .type = TI_SYSC_OMAP4_SIMPLE, + .regbits = &sysc_regbits_omap4_simple, +}; + +/* + * SmartReflex sysc found on omap34xx + */ +static const struct sysc_regbits sysc_regbits_omap34xx_sr = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = -ENODEV, + .clkact_shift = 20, + .enwkup_shift = -ENODEV, + .srst_shift = -ENODEV, + .emufree_shift = -ENODEV, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_34xx_sr = { + .type = TI_SYSC_OMAP34XX_SR, + .sysc_mask = SYSC_OMAP2_CLOCKACTIVITY, + .regbits = &sysc_regbits_omap34xx_sr, + .mod_quirks = SYSC_QUIRK_USE_CLOCKACT | SYSC_QUIRK_UNCACHED, +}; + +/* + * SmartReflex sysc found on omap36xx and later + */ +static const struct sysc_regbits sysc_regbits_omap36xx_sr = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = 24, + .clkact_shift = -ENODEV, + .enwkup_shift = 26, + .srst_shift = -ENODEV, + .emufree_shift = -ENODEV, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_36xx_sr = { + .type = TI_SYSC_OMAP36XX_SR, + .sysc_mask = SYSC_OMAP3_SR_ENAWAKEUP, + .regbits = &sysc_regbits_omap36xx_sr, + .mod_quirks = SYSC_QUIRK_UNCACHED, +}; + +static const struct sysc_capabilities sysc_omap4_sr = { + .type = TI_SYSC_OMAP4_SR, + .regbits = &sysc_regbits_omap36xx_sr, +}; + +/* + * McASP register bits found on omap4 and later + */ +static const struct sysc_regbits sysc_regbits_omap4_mcasp = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = 0, + .clkact_shift = -ENODEV, + .enwkup_shift = -ENODEV, + .srst_shift = -ENODEV, + .emufree_shift = -ENODEV, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_omap4_mcasp = { + .type = TI_SYSC_OMAP4_MCASP, + .regbits = &sysc_regbits_omap4_mcasp, +}; + +/* + * FS USB host found on omap4 and later + */ +static const struct sysc_regbits sysc_regbits_omap4_usb_host_fs = { + .dmadisable_shift = -ENODEV, + .midle_shift = -ENODEV, + .sidle_shift = 24, + .clkact_shift = -ENODEV, + .enwkup_shift = 26, + .srst_shift = -ENODEV, + .emufree_shift = -ENODEV, + .autoidle_shift = -ENODEV, +}; + +static const struct sysc_capabilities sysc_omap4_usb_host_fs = { + .type = TI_SYSC_OMAP4_USB_HOST_FS, + .sysc_mask = SYSC_OMAP2_ENAWAKEUP, + .regbits = &sysc_regbits_omap4_usb_host_fs, +}; + +static int sysc_init_match(struct sysc *ddata) +{ + const struct sysc_capabilities *cap; + + cap = of_device_get_match_data(ddata->dev); + if (!cap) + return -EINVAL; + + ddata->cap = cap; + if (ddata->cap) + ddata->cfg.quirks |= ddata->cap->mod_quirks; + + return 0; +} + static int sysc_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct sysc *ddata; int error; @@ -485,7 +890,15 @@ static int sysc_probe(struct platform_device *pdev) return -ENOMEM; ddata->dev = &pdev->dev; - ddata->legacy_mode = of_get_property(np, "ti,hwmods", NULL); + platform_set_drvdata(pdev, ddata); + + error = sysc_init_match(ddata); + if (error) + return error; + + error = sysc_init_dts_quirks(ddata); + if (error) + goto unprepare; error = sysc_get_clocks(ddata); if (error) @@ -495,9 +908,24 @@ static int sysc_probe(struct platform_device *pdev) if (error) goto unprepare; - platform_set_drvdata(pdev, ddata); + error = sysc_init_sysc_mask(ddata); + if (error) + goto unprepare; + + error = sysc_init_idlemodes(ddata); + if (error) + goto unprepare; + + error = sysc_init_syss_mask(ddata); + if (error) + goto unprepare; pm_runtime_enable(ddata->dev); + + error = sysc_init_module(ddata); + if (error) + goto unprepare; + error = pm_runtime_get_sync(ddata->dev); if (error < 0) { pm_runtime_put_noidle(ddata->dev); @@ -554,16 +982,19 @@ unprepare: } static const struct of_device_id sysc_match[] = { - { .compatible = "ti,sysc-omap2" }, - { .compatible = "ti,sysc-omap4" }, - { .compatible = "ti,sysc-omap4-simple" }, - { .compatible = "ti,sysc-omap3430-sr" }, - { .compatible = "ti,sysc-omap3630-sr" }, - { .compatible = "ti,sysc-omap4-sr" }, - { .compatible = "ti,sysc-omap3-sham" }, - { .compatible = "ti,sysc-omap-aes" }, - { .compatible = "ti,sysc-mcasp" }, - { .compatible = "ti,sysc-usb-host-fs" }, + { .compatible = "ti,sysc-omap2", .data = &sysc_omap2, }, + { .compatible = "ti,sysc-omap2-timer", .data = &sysc_omap2_timer, }, + { .compatible = "ti,sysc-omap4", .data = &sysc_omap4, }, + { .compatible = "ti,sysc-omap4-timer", .data = &sysc_omap4_timer, }, + { .compatible = "ti,sysc-omap4-simple", .data = &sysc_omap4_simple, }, + { .compatible = "ti,sysc-omap3430-sr", .data = &sysc_34xx_sr, }, + { .compatible = "ti,sysc-omap3630-sr", .data = &sysc_36xx_sr, }, + { .compatible = "ti,sysc-omap4-sr", .data = &sysc_omap4_sr, }, + { .compatible = "ti,sysc-omap3-sham", .data = &sysc_omap3_sham, }, + { .compatible = "ti,sysc-omap-aes", .data = &sysc_omap3_aes, }, + { .compatible = "ti,sysc-mcasp", .data = &sysc_omap4_mcasp, }, + { .compatible = "ti,sysc-usb-host-fs", + .data = &sysc_omap4_usb_host_fs, }, { }, }; MODULE_DEVICE_TABLE(of, sysc_match); diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index e77f77caa0f3..b7c748248e53 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -10,7 +10,7 @@ config ARM_PSCI_FW config ARM_PSCI_CHECKER bool "ARM PSCI checker" - depends on ARM_PSCI_FW && HOTPLUG_CPU && !TORTURE_TEST + depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST help Run the PSCI checker during startup. This checks that hotplug and suspend operations work correctly when using PSCI. diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index af4c75217ea6..5a7d693009ef 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -622,30 +622,6 @@ static struct platform_driver qcom_scm_driver = { static int __init qcom_scm_init(void) { - struct device_node *np, *fw_np; - int ret; - - fw_np = of_find_node_by_name(NULL, "firmware"); - - if (!fw_np) - return -ENODEV; - - np = of_find_matching_node(fw_np, qcom_scm_dt_match); - - if (!np) { - of_node_put(fw_np); - return -ENODEV; - } - - of_node_put(np); - - ret = of_platform_populate(fw_np, qcom_scm_dt_match, NULL, NULL); - - of_node_put(fw_np); - - if (ret) - return ret; - return platform_driver_register(&qcom_scm_driver); } subsys_initcall(qcom_scm_init); diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index dd506cd3a5b8..6692888f04cf 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -174,7 +174,7 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw) if (ret == 0) { struct tm tm; - time_to_tm(packet, 0, &tm); + time64_to_tm(packet, 0, &tm); dev_info(fw->cl.dev, "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n", diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 23b12d99ddfe..5229036dcfbf 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -287,13 +287,13 @@ static void ti_sci_rx_callback(struct mbox_client *cl, void *m) /* Is the message of valid length? */ if (mbox_msg->len > info->desc->max_msg_size) { - dev_err(dev, "Unable to handle %d xfer(max %d)\n", + dev_err(dev, "Unable to handle %zu xfer(max %d)\n", mbox_msg->len, info->desc->max_msg_size); ti_sci_dump_header_dbg(dev, hdr); return; } if (mbox_msg->len < xfer->rx_len) { - dev_err(dev, "Recv xfer %d < expected %d length\n", + dev_err(dev, "Recv xfer %zu < expected %d length\n", mbox_msg->len, xfer->rx_len); ti_sci_dump_header_dbg(dev, hdr); return; diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index 3b6449e2cbf1..44d40bc771b5 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -20,6 +20,12 @@ #include #include +struct tegra_smmu_group { + struct list_head list; + const struct tegra_smmu_group_soc *soc; + struct iommu_group *group; +}; + struct tegra_smmu { void __iomem *regs; struct device *dev; @@ -27,6 +33,8 @@ struct tegra_smmu { struct tegra_mc *mc; const struct tegra_smmu_soc *soc; + struct list_head groups; + unsigned long pfn_mask; unsigned long tlb_mask; @@ -703,19 +711,47 @@ static struct tegra_smmu *tegra_smmu_find(struct device_node *np) return mc->smmu; } +static int tegra_smmu_configure(struct tegra_smmu *smmu, struct device *dev, + struct of_phandle_args *args) +{ + const struct iommu_ops *ops = smmu->iommu.ops; + int err; + + err = iommu_fwspec_init(dev, &dev->of_node->fwnode, ops); + if (err < 0) { + dev_err(dev, "failed to initialize fwspec: %d\n", err); + return err; + } + + err = ops->of_xlate(dev, args); + if (err < 0) { + dev_err(dev, "failed to parse SW group ID: %d\n", err); + iommu_fwspec_free(dev); + return err; + } + + return 0; +} + static int tegra_smmu_add_device(struct device *dev) { struct device_node *np = dev->of_node; + struct tegra_smmu *smmu = NULL; struct iommu_group *group; struct of_phandle_args args; unsigned int index = 0; + int err; while (of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index, &args) == 0) { - struct tegra_smmu *smmu; - smmu = tegra_smmu_find(args.np); if (smmu) { + err = tegra_smmu_configure(smmu, dev, &args); + of_node_put(args.np); + + if (err < 0) + return err; + /* * Only a single IOMMU master interface is currently * supported by the Linux kernel, so abort after the @@ -728,9 +764,13 @@ static int tegra_smmu_add_device(struct device *dev) break; } + of_node_put(args.np); index++; } + if (!smmu) + return -ENODEV; + group = iommu_group_get_for_dev(dev); if (IS_ERR(group)) return PTR_ERR(group); @@ -751,6 +791,80 @@ static void tegra_smmu_remove_device(struct device *dev) iommu_group_remove_device(dev); } +static const struct tegra_smmu_group_soc * +tegra_smmu_find_group(struct tegra_smmu *smmu, unsigned int swgroup) +{ + unsigned int i, j; + + for (i = 0; i < smmu->soc->num_groups; i++) + for (j = 0; j < smmu->soc->groups[i].num_swgroups; j++) + if (smmu->soc->groups[i].swgroups[j] == swgroup) + return &smmu->soc->groups[i]; + + return NULL; +} + +static struct iommu_group *tegra_smmu_group_get(struct tegra_smmu *smmu, + unsigned int swgroup) +{ + const struct tegra_smmu_group_soc *soc; + struct tegra_smmu_group *group; + + soc = tegra_smmu_find_group(smmu, swgroup); + if (!soc) + return NULL; + + mutex_lock(&smmu->lock); + + list_for_each_entry(group, &smmu->groups, list) + if (group->soc == soc) { + mutex_unlock(&smmu->lock); + return group->group; + } + + group = devm_kzalloc(smmu->dev, sizeof(*group), GFP_KERNEL); + if (!group) { + mutex_unlock(&smmu->lock); + return NULL; + } + + INIT_LIST_HEAD(&group->list); + group->soc = soc; + + group->group = iommu_group_alloc(); + if (IS_ERR(group->group)) { + devm_kfree(smmu->dev, group); + mutex_unlock(&smmu->lock); + return NULL; + } + + list_add_tail(&group->list, &smmu->groups); + mutex_unlock(&smmu->lock); + + return group->group; +} + +static struct iommu_group *tegra_smmu_device_group(struct device *dev) +{ + struct iommu_fwspec *fwspec = dev->iommu_fwspec; + struct tegra_smmu *smmu = dev->archdata.iommu; + struct iommu_group *group; + + group = tegra_smmu_group_get(smmu, fwspec->ids[0]); + if (!group) + group = generic_device_group(dev); + + return group; +} + +static int tegra_smmu_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + u32 id = args->args[0]; + + return iommu_fwspec_add_ids(dev, &id, 1); +} + static const struct iommu_ops tegra_smmu_ops = { .capable = tegra_smmu_capable, .domain_alloc = tegra_smmu_domain_alloc, @@ -759,12 +873,12 @@ static const struct iommu_ops tegra_smmu_ops = { .detach_dev = tegra_smmu_detach_dev, .add_device = tegra_smmu_add_device, .remove_device = tegra_smmu_remove_device, - .device_group = generic_device_group, + .device_group = tegra_smmu_device_group, .map = tegra_smmu_map, .unmap = tegra_smmu_unmap, .map_sg = default_iommu_map_sg, .iova_to_phys = tegra_smmu_iova_to_phys, - + .of_xlate = tegra_smmu_of_xlate, .pgsize_bitmap = SZ_4K, }; @@ -913,6 +1027,7 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev, if (!smmu->asids) return ERR_PTR(-ENOMEM); + INIT_LIST_HEAD(&smmu->groups); mutex_init(&smmu->lock); smmu->regs = mc->regs; @@ -954,6 +1069,7 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev, return ERR_PTR(err); iommu_device_set_ops(&smmu->iommu, &tegra_smmu_ops); + iommu_device_set_fwnode(&smmu->iommu, dev->fwnode); err = iommu_device_register(&smmu->iommu); if (err) { diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index ffc350258041..19a0e83f260d 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -84,6 +84,16 @@ config OMAP_GPMC_DEBUG bootloader or else the GPMC timings won't be identical with the bootloader timings. +config TI_EMIF_SRAM + tristate "Texas Instruments EMIF SRAM driver" + depends on (SOC_AM33XX || SOC_AM43XX) && SRAM + help + This driver is for the EMIF module available on Texas Instruments + AM33XX and AM43XX SoCs and is required for PM. Certain parts of + the EMIF PM code must run from on-chip SRAM late in the suspend + sequence so this driver provides several relocatable PM functions + for the SoC PM code to use. + config MVEBU_DEVBUS bool "Marvell EBU Device Bus Controller" default y diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index 929a601d4cd1..66f55240830e 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -23,3 +23,11 @@ obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o obj-$(CONFIG_SAMSUNG_MC) += samsung/ obj-$(CONFIG_TEGRA_MC) += tegra/ +obj-$(CONFIG_TI_EMIF_SRAM) += ti-emif-sram.o +ti-emif-sram-objs := ti-emif-pm.o ti-emif-sram-pm.o + +AFLAGS_ti-emif-sram-pm.o :=-Wa,-march=armv7-a + +include drivers/memory/Makefile.asm-offsets + +drivers/memory/ti-emif-sram-pm.o: include/generated/ti-emif-asm-offsets.h diff --git a/drivers/memory/Makefile.asm-offsets b/drivers/memory/Makefile.asm-offsets new file mode 100644 index 000000000000..843ff60ccb5a --- /dev/null +++ b/drivers/memory/Makefile.asm-offsets @@ -0,0 +1,5 @@ +drivers/memory/emif-asm-offsets.s: drivers/memory/emif-asm-offsets.c + $(call if_changed_dep,cc_s_c) + +include/generated/ti-emif-asm-offsets.h: drivers/memory/emif-asm-offsets.s FORCE + $(call filechk,offsets,__TI_EMIF_ASM_OFFSETS_H__) diff --git a/drivers/memory/emif-asm-offsets.c b/drivers/memory/emif-asm-offsets.c new file mode 100644 index 000000000000..71a89d5d3efd --- /dev/null +++ b/drivers/memory/emif-asm-offsets.c @@ -0,0 +1,92 @@ +/* + * TI AM33XX EMIF PM Assembly Offsets + * + * Copyright (C) 2016-2017 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include + +int main(void) +{ + DEFINE(EMIF_SDCFG_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_sdcfg_val)); + DEFINE(EMIF_TIMING1_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_timing1_val)); + DEFINE(EMIF_TIMING2_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_timing2_val)); + DEFINE(EMIF_TIMING3_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_timing3_val)); + DEFINE(EMIF_REF_CTRL_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_ref_ctrl_val)); + DEFINE(EMIF_ZQCFG_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_zqcfg_val)); + DEFINE(EMIF_PMCR_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_pmcr_val)); + DEFINE(EMIF_PMCR_SHDW_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_pmcr_shdw_val)); + DEFINE(EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET, + offsetof(struct emif_regs_amx3, emif_rd_wr_level_ramp_ctrl)); + DEFINE(EMIF_RD_WR_EXEC_THRESH_OFFSET, + offsetof(struct emif_regs_amx3, emif_rd_wr_exec_thresh)); + DEFINE(EMIF_COS_CONFIG_OFFSET, + offsetof(struct emif_regs_amx3, emif_cos_config)); + DEFINE(EMIF_PRIORITY_TO_COS_MAPPING_OFFSET, + offsetof(struct emif_regs_amx3, emif_priority_to_cos_mapping)); + DEFINE(EMIF_CONNECT_ID_SERV_1_MAP_OFFSET, + offsetof(struct emif_regs_amx3, emif_connect_id_serv_1_map)); + DEFINE(EMIF_CONNECT_ID_SERV_2_MAP_OFFSET, + offsetof(struct emif_regs_amx3, emif_connect_id_serv_2_map)); + DEFINE(EMIF_OCP_CONFIG_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_ocp_config_val)); + DEFINE(EMIF_LPDDR2_NVM_TIM_OFFSET, + offsetof(struct emif_regs_amx3, emif_lpddr2_nvm_tim)); + DEFINE(EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET, + offsetof(struct emif_regs_amx3, emif_lpddr2_nvm_tim_shdw)); + DEFINE(EMIF_DLL_CALIB_CTRL_VAL_OFFSET, + offsetof(struct emif_regs_amx3, emif_dll_calib_ctrl_val)); + DEFINE(EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET, + offsetof(struct emif_regs_amx3, emif_dll_calib_ctrl_val_shdw)); + DEFINE(EMIF_DDR_PHY_CTLR_1_OFFSET, + offsetof(struct emif_regs_amx3, emif_ddr_phy_ctlr_1)); + DEFINE(EMIF_EXT_PHY_CTRL_VALS_OFFSET, + offsetof(struct emif_regs_amx3, emif_ext_phy_ctrl_vals)); + DEFINE(EMIF_REGS_AMX3_SIZE, sizeof(struct emif_regs_amx3)); + + BLANK(); + + DEFINE(EMIF_PM_BASE_ADDR_VIRT_OFFSET, + offsetof(struct ti_emif_pm_data, ti_emif_base_addr_virt)); + DEFINE(EMIF_PM_BASE_ADDR_PHYS_OFFSET, + offsetof(struct ti_emif_pm_data, ti_emif_base_addr_phys)); + DEFINE(EMIF_PM_CONFIG_OFFSET, + offsetof(struct ti_emif_pm_data, ti_emif_sram_config)); + DEFINE(EMIF_PM_REGS_VIRT_OFFSET, + offsetof(struct ti_emif_pm_data, regs_virt)); + DEFINE(EMIF_PM_REGS_PHYS_OFFSET, + offsetof(struct ti_emif_pm_data, regs_phys)); + DEFINE(EMIF_PM_DATA_SIZE, sizeof(struct ti_emif_pm_data)); + + BLANK(); + + DEFINE(EMIF_PM_SAVE_CONTEXT_OFFSET, + offsetof(struct ti_emif_pm_functions, save_context)); + DEFINE(EMIF_PM_RESTORE_CONTEXT_OFFSET, + offsetof(struct ti_emif_pm_functions, restore_context)); + DEFINE(EMIF_PM_ENTER_SR_OFFSET, + offsetof(struct ti_emif_pm_functions, enter_sr)); + DEFINE(EMIF_PM_EXIT_SR_OFFSET, + offsetof(struct ti_emif_pm_functions, exit_sr)); + DEFINE(EMIF_PM_ABORT_SR_OFFSET, + offsetof(struct ti_emif_pm_functions, abort_sr)); + DEFINE(EMIF_PM_FUNCTIONS_SIZE, sizeof(struct ti_emif_pm_functions)); + + return 0; +} diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h index bfe08bae961a..9e9f8037955d 100644 --- a/drivers/memory/emif.h +++ b/drivers/memory/emif.h @@ -555,6 +555,9 @@ #define READ_LATENCY_SHDW_SHIFT 0 #define READ_LATENCY_SHDW_MASK (0x1f << 0) +#define EMIF_SRAM_AM33_REG_LAYOUT 0x00000000 +#define EMIF_SRAM_AM43_REG_LAYOUT 0x00000001 + #ifndef __ASSEMBLY__ /* * Structure containing shadow of important registers in EMIF @@ -585,5 +588,19 @@ struct emif_regs { u32 ext_phy_ctrl_3_shdw; u32 ext_phy_ctrl_4_shdw; }; + +struct ti_emif_pm_functions; + +extern unsigned int ti_emif_sram; +extern unsigned int ti_emif_sram_sz; +extern struct ti_emif_pm_data ti_emif_pm_sram_data; +extern struct emif_regs_amx3 ti_emif_regs_amx3; + +void ti_emif_save_context(void); +void ti_emif_restore_context(void); +void ti_emif_enter_sr(void); +void ti_emif_exit_sr(void); +void ti_emif_abort_sr(void); + #endif /* __ASSEMBLY__ */ #endif /* __EMIF_H */ diff --git a/drivers/memory/tegra/Makefile b/drivers/memory/tegra/Makefile index b44e8627a5e0..ce87a9470034 100644 --- a/drivers/memory/tegra/Makefile +++ b/drivers/memory/tegra/Makefile @@ -10,3 +10,4 @@ tegra-mc-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210.o obj-$(CONFIG_TEGRA_MC) += tegra-mc.o obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o +obj-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186.o diff --git a/drivers/memory/tegra/tegra114.c b/drivers/memory/tegra/tegra114.c index ba8fff3d66a6..b20e6e3e208e 100644 --- a/drivers/memory/tegra/tegra114.c +++ b/drivers/memory/tegra/tegra114.c @@ -912,11 +912,26 @@ static const struct tegra_smmu_swgroup tegra114_swgroups[] = { { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 }, }; +static const unsigned int tegra114_group_display[] = { + TEGRA_SWGROUP_DC, + TEGRA_SWGROUP_DCB, +}; + +static const struct tegra_smmu_group_soc tegra114_groups[] = { + { + .name = "display", + .swgroups = tegra114_group_display, + .num_swgroups = ARRAY_SIZE(tegra114_group_display), + }, +}; + static const struct tegra_smmu_soc tegra114_smmu_soc = { .clients = tegra114_mc_clients, .num_clients = ARRAY_SIZE(tegra114_mc_clients), .swgroups = tegra114_swgroups, .num_swgroups = ARRAY_SIZE(tegra114_swgroups), + .groups = tegra114_groups, + .num_groups = ARRAY_SIZE(tegra114_groups), .supports_round_robin_arbitration = false, .supports_request_limit = false, .num_tlb_lines = 32, diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c index 5a58e440f4a7..8b6360eabb8a 100644 --- a/drivers/memory/tegra/tegra124.c +++ b/drivers/memory/tegra/tegra124.c @@ -999,12 +999,27 @@ static const struct tegra_smmu_swgroup tegra124_swgroups[] = { { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, }; +static const unsigned int tegra124_group_display[] = { + TEGRA_SWGROUP_DC, + TEGRA_SWGROUP_DCB, +}; + +static const struct tegra_smmu_group_soc tegra124_groups[] = { + { + .name = "display", + .swgroups = tegra124_group_display, + .num_swgroups = ARRAY_SIZE(tegra124_group_display), + }, +}; + #ifdef CONFIG_ARCH_TEGRA_124_SOC static const struct tegra_smmu_soc tegra124_smmu_soc = { .clients = tegra124_mc_clients, .num_clients = ARRAY_SIZE(tegra124_mc_clients), .swgroups = tegra124_swgroups, .num_swgroups = ARRAY_SIZE(tegra124_swgroups), + .groups = tegra124_groups, + .num_groups = ARRAY_SIZE(tegra124_groups), .supports_round_robin_arbitration = true, .supports_request_limit = true, .num_tlb_lines = 32, @@ -1029,6 +1044,8 @@ static const struct tegra_smmu_soc tegra132_smmu_soc = { .num_clients = ARRAY_SIZE(tegra124_mc_clients), .swgroups = tegra124_swgroups, .num_swgroups = ARRAY_SIZE(tegra124_swgroups), + .groups = tegra124_groups, + .num_groups = ARRAY_SIZE(tegra124_groups), .supports_round_robin_arbitration = true, .supports_request_limit = true, .num_tlb_lines = 32, diff --git a/drivers/memory/tegra/tegra186.c b/drivers/memory/tegra/tegra186.c new file mode 100644 index 000000000000..7254fb596979 --- /dev/null +++ b/drivers/memory/tegra/tegra186.c @@ -0,0 +1,600 @@ +/* + * Copyright (C) 2017 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include + +struct tegra_mc { + struct device *dev; + void __iomem *regs; +}; + +struct tegra_mc_client { + const char *name; + unsigned int sid; + struct { + unsigned int override; + unsigned int security; + } regs; +}; + +static const struct tegra_mc_client tegra186_mc_clients[] = { + { + .name = "ptcr", + .sid = TEGRA186_SID_PASSTHROUGH, + .regs = { + .override = 0x000, + .security = 0x004, + }, + }, { + .name = "afir", + .sid = TEGRA186_SID_AFI, + .regs = { + .override = 0x070, + .security = 0x074, + }, + }, { + .name = "hdar", + .sid = TEGRA186_SID_HDA, + .regs = { + .override = 0x0a8, + .security = 0x0ac, + }, + }, { + .name = "host1xdmar", + .sid = TEGRA186_SID_HOST1X, + .regs = { + .override = 0x0b0, + .security = 0x0b4, + }, + }, { + .name = "nvencsrd", + .sid = TEGRA186_SID_NVENC, + .regs = { + .override = 0x0e0, + .security = 0x0e4, + }, + }, { + .name = "satar", + .sid = TEGRA186_SID_SATA, + .regs = { + .override = 0x0f8, + .security = 0x0fc, + }, + }, { + .name = "mpcorer", + .sid = TEGRA186_SID_PASSTHROUGH, + .regs = { + .override = 0x138, + .security = 0x13c, + }, + }, { + .name = "nvencswr", + .sid = TEGRA186_SID_NVENC, + .regs = { + .override = 0x158, + .security = 0x15c, + }, + }, { + .name = "afiw", + .sid = TEGRA186_SID_AFI, + .regs = { + .override = 0x188, + .security = 0x18c, + }, + }, { + .name = "hdaw", + .sid = TEGRA186_SID_HDA, + .regs = { + .override = 0x1a8, + .security = 0x1ac, + }, + }, { + .name = "mpcorew", + .sid = TEGRA186_SID_PASSTHROUGH, + .regs = { + .override = 0x1c8, + .security = 0x1cc, + }, + }, { + .name = "sataw", + .sid = TEGRA186_SID_SATA, + .regs = { + .override = 0x1e8, + .security = 0x1ec, + }, + }, { + .name = "ispra", + .sid = TEGRA186_SID_ISP, + .regs = { + .override = 0x220, + .security = 0x224, + }, + }, { + .name = "ispwa", + .sid = TEGRA186_SID_ISP, + .regs = { + .override = 0x230, + .security = 0x234, + }, + }, { + .name = "ispwb", + .sid = TEGRA186_SID_ISP, + .regs = { + .override = 0x238, + .security = 0x23c, + }, + }, { + .name = "xusb_hostr", + .sid = TEGRA186_SID_XUSB_HOST, + .regs = { + .override = 0x250, + .security = 0x254, + }, + }, { + .name = "xusb_hostw", + .sid = TEGRA186_SID_XUSB_HOST, + .regs = { + .override = 0x258, + .security = 0x25c, + }, + }, { + .name = "xusb_devr", + .sid = TEGRA186_SID_XUSB_DEV, + .regs = { + .override = 0x260, + .security = 0x264, + }, + }, { + .name = "xusb_devw", + .sid = TEGRA186_SID_XUSB_DEV, + .regs = { + .override = 0x268, + .security = 0x26c, + }, + }, { + .name = "tsecsrd", + .sid = TEGRA186_SID_TSEC, + .regs = { + .override = 0x2a0, + .security = 0x2a4, + }, + }, { + .name = "tsecswr", + .sid = TEGRA186_SID_TSEC, + .regs = { + .override = 0x2a8, + .security = 0x2ac, + }, + }, { + .name = "gpusrd", + .sid = TEGRA186_SID_GPU, + .regs = { + .override = 0x2c0, + .security = 0x2c4, + }, + }, { + .name = "gpuswr", + .sid = TEGRA186_SID_GPU, + .regs = { + .override = 0x2c8, + .security = 0x2cc, + }, + }, { + .name = "sdmmcra", + .sid = TEGRA186_SID_SDMMC1, + .regs = { + .override = 0x300, + .security = 0x304, + }, + }, { + .name = "sdmmcraa", + .sid = TEGRA186_SID_SDMMC2, + .regs = { + .override = 0x308, + .security = 0x30c, + }, + }, { + .name = "sdmmcr", + .sid = TEGRA186_SID_SDMMC3, + .regs = { + .override = 0x310, + .security = 0x314, + }, + }, { + .name = "sdmmcrab", + .sid = TEGRA186_SID_SDMMC4, + .regs = { + .override = 0x318, + .security = 0x31c, + }, + }, { + .name = "sdmmcwa", + .sid = TEGRA186_SID_SDMMC1, + .regs = { + .override = 0x320, + .security = 0x324, + }, + }, { + .name = "sdmmcwaa", + .sid = TEGRA186_SID_SDMMC2, + .regs = { + .override = 0x328, + .security = 0x32c, + }, + }, { + .name = "sdmmcw", + .sid = TEGRA186_SID_SDMMC3, + .regs = { + .override = 0x330, + .security = 0x334, + }, + }, { + .name = "sdmmcwab", + .sid = TEGRA186_SID_SDMMC4, + .regs = { + .override = 0x338, + .security = 0x33c, + }, + }, { + .name = "vicsrd", + .sid = TEGRA186_SID_VIC, + .regs = { + .override = 0x360, + .security = 0x364, + }, + }, { + .name = "vicswr", + .sid = TEGRA186_SID_VIC, + .regs = { + .override = 0x368, + .security = 0x36c, + }, + }, { + .name = "viw", + .sid = TEGRA186_SID_VI, + .regs = { + .override = 0x390, + .security = 0x394, + }, + }, { + .name = "nvdecsrd", + .sid = TEGRA186_SID_NVDEC, + .regs = { + .override = 0x3c0, + .security = 0x3c4, + }, + }, { + .name = "nvdecswr", + .sid = TEGRA186_SID_NVDEC, + .regs = { + .override = 0x3c8, + .security = 0x3cc, + }, + }, { + .name = "aper", + .sid = TEGRA186_SID_APE, + .regs = { + .override = 0x3d0, + .security = 0x3d4, + }, + }, { + .name = "apew", + .sid = TEGRA186_SID_APE, + .regs = { + .override = 0x3d8, + .security = 0x3dc, + }, + }, { + .name = "nvjpgsrd", + .sid = TEGRA186_SID_NVJPG, + .regs = { + .override = 0x3f0, + .security = 0x3f4, + }, + }, { + .name = "nvjpgswr", + .sid = TEGRA186_SID_NVJPG, + .regs = { + .override = 0x3f8, + .security = 0x3fc, + }, + }, { + .name = "sesrd", + .sid = TEGRA186_SID_SE, + .regs = { + .override = 0x400, + .security = 0x404, + }, + }, { + .name = "seswr", + .sid = TEGRA186_SID_SE, + .regs = { + .override = 0x408, + .security = 0x40c, + }, + }, { + .name = "etrr", + .sid = TEGRA186_SID_ETR, + .regs = { + .override = 0x420, + .security = 0x424, + }, + }, { + .name = "etrw", + .sid = TEGRA186_SID_ETR, + .regs = { + .override = 0x428, + .security = 0x42c, + }, + }, { + .name = "tsecsrdb", + .sid = TEGRA186_SID_TSECB, + .regs = { + .override = 0x430, + .security = 0x434, + }, + }, { + .name = "tsecswrb", + .sid = TEGRA186_SID_TSECB, + .regs = { + .override = 0x438, + .security = 0x43c, + }, + }, { + .name = "gpusrd2", + .sid = TEGRA186_SID_GPU, + .regs = { + .override = 0x440, + .security = 0x444, + }, + }, { + .name = "gpuswr2", + .sid = TEGRA186_SID_GPU, + .regs = { + .override = 0x448, + .security = 0x44c, + }, + }, { + .name = "axisr", + .sid = TEGRA186_SID_GPCDMA_0, + .regs = { + .override = 0x460, + .security = 0x464, + }, + }, { + .name = "axisw", + .sid = TEGRA186_SID_GPCDMA_0, + .regs = { + .override = 0x468, + .security = 0x46c, + }, + }, { + .name = "eqosr", + .sid = TEGRA186_SID_EQOS, + .regs = { + .override = 0x470, + .security = 0x474, + }, + }, { + .name = "eqosw", + .sid = TEGRA186_SID_EQOS, + .regs = { + .override = 0x478, + .security = 0x47c, + }, + }, { + .name = "ufshcr", + .sid = TEGRA186_SID_UFSHC, + .regs = { + .override = 0x480, + .security = 0x484, + }, + }, { + .name = "ufshcw", + .sid = TEGRA186_SID_UFSHC, + .regs = { + .override = 0x488, + .security = 0x48c, + }, + }, { + .name = "nvdisplayr", + .sid = TEGRA186_SID_NVDISPLAY, + .regs = { + .override = 0x490, + .security = 0x494, + }, + }, { + .name = "bpmpr", + .sid = TEGRA186_SID_BPMP, + .regs = { + .override = 0x498, + .security = 0x49c, + }, + }, { + .name = "bpmpw", + .sid = TEGRA186_SID_BPMP, + .regs = { + .override = 0x4a0, + .security = 0x4a4, + }, + }, { + .name = "bpmpdmar", + .sid = TEGRA186_SID_BPMP, + .regs = { + .override = 0x4a8, + .security = 0x4ac, + }, + }, { + .name = "bpmpdmaw", + .sid = TEGRA186_SID_BPMP, + .regs = { + .override = 0x4b0, + .security = 0x4b4, + }, + }, { + .name = "aonr", + .sid = TEGRA186_SID_AON, + .regs = { + .override = 0x4b8, + .security = 0x4bc, + }, + }, { + .name = "aonw", + .sid = TEGRA186_SID_AON, + .regs = { + .override = 0x4c0, + .security = 0x4c4, + }, + }, { + .name = "aondmar", + .sid = TEGRA186_SID_AON, + .regs = { + .override = 0x4c8, + .security = 0x4cc, + }, + }, { + .name = "aondmaw", + .sid = TEGRA186_SID_AON, + .regs = { + .override = 0x4d0, + .security = 0x4d4, + }, + }, { + .name = "scer", + .sid = TEGRA186_SID_SCE, + .regs = { + .override = 0x4d8, + .security = 0x4dc, + }, + }, { + .name = "scew", + .sid = TEGRA186_SID_SCE, + .regs = { + .override = 0x4e0, + .security = 0x4e4, + }, + }, { + .name = "scedmar", + .sid = TEGRA186_SID_SCE, + .regs = { + .override = 0x4e8, + .security = 0x4ec, + }, + }, { + .name = "scedmaw", + .sid = TEGRA186_SID_SCE, + .regs = { + .override = 0x4f0, + .security = 0x4f4, + }, + }, { + .name = "apedmar", + .sid = TEGRA186_SID_APE, + .regs = { + .override = 0x4f8, + .security = 0x4fc, + }, + }, { + .name = "apedmaw", + .sid = TEGRA186_SID_APE, + .regs = { + .override = 0x500, + .security = 0x504, + }, + }, { + .name = "nvdisplayr1", + .sid = TEGRA186_SID_NVDISPLAY, + .regs = { + .override = 0x508, + .security = 0x50c, + }, + }, { + .name = "vicsrd1", + .sid = TEGRA186_SID_VIC, + .regs = { + .override = 0x510, + .security = 0x514, + }, + }, { + .name = "nvdecsrd1", + .sid = TEGRA186_SID_NVDEC, + .regs = { + .override = 0x518, + .security = 0x51c, + }, + }, +}; + +static int tegra186_mc_probe(struct platform_device *pdev) +{ + struct resource *res; + struct tegra_mc *mc; + unsigned int i; + int err = 0; + + mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL); + if (!mc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mc->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mc->regs)) + return PTR_ERR(mc->regs); + + mc->dev = &pdev->dev; + + for (i = 0; i < ARRAY_SIZE(tegra186_mc_clients); i++) { + const struct tegra_mc_client *client = &tegra186_mc_clients[i]; + u32 override, security; + + override = readl(mc->regs + client->regs.override); + security = readl(mc->regs + client->regs.security); + + dev_dbg(&pdev->dev, "client %s: override: %x security: %x\n", + client->name, override, security); + + dev_dbg(&pdev->dev, "setting SID %u for %s\n", client->sid, + client->name); + writel(client->sid, mc->regs + client->regs.override); + + override = readl(mc->regs + client->regs.override); + security = readl(mc->regs + client->regs.security); + + dev_dbg(&pdev->dev, "client %s: override: %x security: %x\n", + client->name, override, security); + } + + platform_set_drvdata(pdev, mc); + + return err; +} + +static const struct of_device_id tegra186_mc_of_match[] = { + { .compatible = "nvidia,tegra186-mc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tegra186_mc_of_match); + +static struct platform_driver tegra186_mc_driver = { + .driver = { + .name = "tegra186-mc", + .of_match_table = tegra186_mc_of_match, + .suppress_bind_attrs = true, + }, + .prevent_deferred_probe = true, + .probe = tegra186_mc_probe, +}; +module_platform_driver(tegra186_mc_driver); + +MODULE_AUTHOR("Thierry Reding "); +MODULE_DESCRIPTION("NVIDIA Tegra186 Memory Controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/memory/tegra/tegra210.c b/drivers/memory/tegra/tegra210.c index 5e144abe4c18..d398bcd3fc57 100644 --- a/drivers/memory/tegra/tegra210.c +++ b/drivers/memory/tegra/tegra210.c @@ -1059,11 +1059,26 @@ static const struct tegra_smmu_swgroup tegra210_swgroups[] = { { .name = "tsecb", .swgroup = TEGRA_SWGROUP_TSECB, .reg = 0xad4 }, }; +static const unsigned int tegra210_group_display[] = { + TEGRA_SWGROUP_DC, + TEGRA_SWGROUP_DCB, +}; + +static const struct tegra_smmu_group_soc tegra210_groups[] = { + { + .name = "display", + .swgroups = tegra210_group_display, + .num_swgroups = ARRAY_SIZE(tegra210_group_display), + }, +}; + static const struct tegra_smmu_soc tegra210_smmu_soc = { .clients = tegra210_mc_clients, .num_clients = ARRAY_SIZE(tegra210_mc_clients), .swgroups = tegra210_swgroups, .num_swgroups = ARRAY_SIZE(tegra210_swgroups), + .groups = tegra210_groups, + .num_groups = ARRAY_SIZE(tegra210_groups), .supports_round_robin_arbitration = true, .supports_request_limit = true, .num_tlb_lines = 32, diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c index b44737840e70..d756c837f23e 100644 --- a/drivers/memory/tegra/tegra30.c +++ b/drivers/memory/tegra/tegra30.c @@ -934,11 +934,26 @@ static const struct tegra_smmu_swgroup tegra30_swgroups[] = { { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 }, }; +static const unsigned int tegra30_group_display[] = { + TEGRA_SWGROUP_DC, + TEGRA_SWGROUP_DCB, +}; + +static const struct tegra_smmu_group_soc tegra30_groups[] = { + { + .name = "display", + .swgroups = tegra30_group_display, + .num_swgroups = ARRAY_SIZE(tegra30_group_display), + }, +}; + static const struct tegra_smmu_soc tegra30_smmu_soc = { .clients = tegra30_mc_clients, .num_clients = ARRAY_SIZE(tegra30_mc_clients), .swgroups = tegra30_swgroups, .num_swgroups = ARRAY_SIZE(tegra30_swgroups), + .groups = tegra30_groups, + .num_groups = ARRAY_SIZE(tegra30_groups), .supports_round_robin_arbitration = false, .supports_request_limit = false, .num_tlb_lines = 16, diff --git a/drivers/memory/ti-emif-pm.c b/drivers/memory/ti-emif-pm.c new file mode 100644 index 000000000000..62a86c4bcd0b --- /dev/null +++ b/drivers/memory/ti-emif-pm.c @@ -0,0 +1,324 @@ +/* + * TI AM33XX SRAM EMIF Driver + * + * Copyright (C) 2016-2017 Texas Instruments Inc. + * Dave Gerlach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "emif.h" + +#define TI_EMIF_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \ + (unsigned long)&ti_emif_sram) + +#define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES 0x00a0 + +struct ti_emif_data { + phys_addr_t ti_emif_sram_phys; + phys_addr_t ti_emif_sram_data_phys; + unsigned long ti_emif_sram_virt; + unsigned long ti_emif_sram_data_virt; + struct gen_pool *sram_pool_code; + struct gen_pool *sram_pool_data; + struct ti_emif_pm_data pm_data; + struct ti_emif_pm_functions pm_functions; +}; + +static struct ti_emif_data *emif_instance; + +static u32 sram_suspend_address(struct ti_emif_data *emif_data, + unsigned long addr) +{ + return (emif_data->ti_emif_sram_virt + + TI_EMIF_SRAM_SYMBOL_OFFSET(addr)); +} + +static phys_addr_t sram_resume_address(struct ti_emif_data *emif_data, + unsigned long addr) +{ + return ((unsigned long)emif_data->ti_emif_sram_phys + + TI_EMIF_SRAM_SYMBOL_OFFSET(addr)); +} + +static void ti_emif_free_sram(struct ti_emif_data *emif_data) +{ + gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt, + ti_emif_sram_sz); + gen_pool_free(emif_data->sram_pool_data, + emif_data->ti_emif_sram_data_virt, + sizeof(struct emif_regs_amx3)); +} + +static int ti_emif_alloc_sram(struct device *dev, + struct ti_emif_data *emif_data) +{ + struct device_node *np = dev->of_node; + int ret; + + emif_data->sram_pool_code = of_gen_pool_get(np, "sram", 0); + if (!emif_data->sram_pool_code) { + dev_err(dev, "Unable to get sram pool for ocmcram code\n"); + return -ENODEV; + } + + emif_data->ti_emif_sram_virt = + gen_pool_alloc(emif_data->sram_pool_code, + ti_emif_sram_sz); + if (!emif_data->ti_emif_sram_virt) { + dev_err(dev, "Unable to allocate code memory from ocmcram\n"); + return -ENOMEM; + } + + /* Save physical address to calculate resume offset during pm init */ + emif_data->ti_emif_sram_phys = + gen_pool_virt_to_phys(emif_data->sram_pool_code, + emif_data->ti_emif_sram_virt); + + /* Get sram pool for data section and allocate space */ + emif_data->sram_pool_data = of_gen_pool_get(np, "sram", 1); + if (!emif_data->sram_pool_data) { + dev_err(dev, "Unable to get sram pool for ocmcram data\n"); + ret = -ENODEV; + goto err_free_sram_code; + } + + emif_data->ti_emif_sram_data_virt = + gen_pool_alloc(emif_data->sram_pool_data, + sizeof(struct emif_regs_amx3)); + if (!emif_data->ti_emif_sram_data_virt) { + dev_err(dev, "Unable to allocate data memory from ocmcram\n"); + ret = -ENOMEM; + goto err_free_sram_code; + } + + /* Save physical address to calculate resume offset during pm init */ + emif_data->ti_emif_sram_data_phys = + gen_pool_virt_to_phys(emif_data->sram_pool_data, + emif_data->ti_emif_sram_data_virt); + /* + * These functions are called during suspend path while MMU is + * still on so add virtual base to offset for absolute address + */ + emif_data->pm_functions.save_context = + sram_suspend_address(emif_data, + (unsigned long)ti_emif_save_context); + emif_data->pm_functions.enter_sr = + sram_suspend_address(emif_data, + (unsigned long)ti_emif_enter_sr); + emif_data->pm_functions.abort_sr = + sram_suspend_address(emif_data, + (unsigned long)ti_emif_abort_sr); + + /* + * These are called during resume path when MMU is not enabled + * so physical address is used instead + */ + emif_data->pm_functions.restore_context = + sram_resume_address(emif_data, + (unsigned long)ti_emif_restore_context); + emif_data->pm_functions.exit_sr = + sram_resume_address(emif_data, + (unsigned long)ti_emif_exit_sr); + + emif_data->pm_data.regs_virt = + (struct emif_regs_amx3 *)emif_data->ti_emif_sram_data_virt; + emif_data->pm_data.regs_phys = emif_data->ti_emif_sram_data_phys; + + return 0; + +err_free_sram_code: + gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt, + ti_emif_sram_sz); + return ret; +} + +static int ti_emif_push_sram(struct device *dev, struct ti_emif_data *emif_data) +{ + void *copy_addr; + u32 data_addr; + + copy_addr = sram_exec_copy(emif_data->sram_pool_code, + (void *)emif_data->ti_emif_sram_virt, + &ti_emif_sram, ti_emif_sram_sz); + if (!copy_addr) { + dev_err(dev, "Cannot copy emif code to sram\n"); + return -ENODEV; + } + + data_addr = sram_suspend_address(emif_data, + (unsigned long)&ti_emif_pm_sram_data); + copy_addr = sram_exec_copy(emif_data->sram_pool_code, + (void *)data_addr, + &emif_data->pm_data, + sizeof(emif_data->pm_data)); + if (!copy_addr) { + dev_err(dev, "Cannot copy emif data to code sram\n"); + return -ENODEV; + } + + return 0; +} + +/* + * Due to Usage Note 3.1.2 "DDR3: JEDEC Compliance for Maximum + * Self-Refresh Command Limit" found in AM335x Silicon Errata + * (Document SPRZ360F Revised November 2013) we must configure + * the self refresh delay timer to 0xA (8192 cycles) to avoid + * generating too many refresh command from the EMIF. + */ +static void ti_emif_configure_sr_delay(struct ti_emif_data *emif_data) +{ + writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES, + (emif_data->pm_data.ti_emif_base_addr_virt + + EMIF_POWER_MANAGEMENT_CONTROL)); + + writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES, + (emif_data->pm_data.ti_emif_base_addr_virt + + EMIF_POWER_MANAGEMENT_CTRL_SHDW)); +} + +/** + * ti_emif_copy_pm_function_table - copy mapping of pm funcs in sram + * @sram_pool: pointer to struct gen_pool where dst resides + * @dst: void * to address that table should be copied + * + * Returns 0 if success other error code if table is not available + */ +int ti_emif_copy_pm_function_table(struct gen_pool *sram_pool, void *dst) +{ + void *copy_addr; + + if (!emif_instance) + return -ENODEV; + + copy_addr = sram_exec_copy(sram_pool, dst, + &emif_instance->pm_functions, + sizeof(emif_instance->pm_functions)); + if (!copy_addr) + return -ENODEV; + + return 0; +} +EXPORT_SYMBOL_GPL(ti_emif_copy_pm_function_table); + +/** + * ti_emif_get_mem_type - return type for memory type in use + * + * Returns memory type value read from EMIF or error code if fails + */ +int ti_emif_get_mem_type(void) +{ + unsigned long temp; + + if (!emif_instance) + return -ENODEV; + + temp = readl(emif_instance->pm_data.ti_emif_base_addr_virt + + EMIF_SDRAM_CONFIG); + + temp = (temp & SDRAM_TYPE_MASK) >> SDRAM_TYPE_SHIFT; + return temp; +} +EXPORT_SYMBOL_GPL(ti_emif_get_mem_type); + +static const struct of_device_id ti_emif_of_match[] = { + { .compatible = "ti,emif-am3352", .data = + (void *)EMIF_SRAM_AM33_REG_LAYOUT, }, + { .compatible = "ti,emif-am4372", .data = + (void *)EMIF_SRAM_AM43_REG_LAYOUT, }, + {}, +}; +MODULE_DEVICE_TABLE(of, ti_emif_of_match); + +static int ti_emif_probe(struct platform_device *pdev) +{ + int ret; + struct resource *res; + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct ti_emif_data *emif_data; + + emif_data = devm_kzalloc(dev, sizeof(*emif_data), GFP_KERNEL); + if (!emif_data) + return -ENOMEM; + + match = of_match_device(ti_emif_of_match, &pdev->dev); + if (!match) + return -ENODEV; + + emif_data->pm_data.ti_emif_sram_config = (unsigned long)match->data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + emif_data->pm_data.ti_emif_base_addr_virt = devm_ioremap_resource(dev, + res); + if (IS_ERR(emif_data->pm_data.ti_emif_base_addr_virt)) { + dev_err(dev, "could not ioremap emif mem\n"); + ret = PTR_ERR(emif_data->pm_data.ti_emif_base_addr_virt); + return ret; + } + + emif_data->pm_data.ti_emif_base_addr_phys = res->start; + + ti_emif_configure_sr_delay(emif_data); + + ret = ti_emif_alloc_sram(dev, emif_data); + if (ret) + return ret; + + ret = ti_emif_push_sram(dev, emif_data); + if (ret) + goto fail_free_sram; + + emif_instance = emif_data; + + return 0; + +fail_free_sram: + ti_emif_free_sram(emif_data); + + return ret; +} + +static int ti_emif_remove(struct platform_device *pdev) +{ + struct ti_emif_data *emif_data = emif_instance; + + emif_instance = NULL; + + ti_emif_free_sram(emif_data); + + return 0; +} + +static struct platform_driver ti_emif_driver = { + .probe = ti_emif_probe, + .remove = ti_emif_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = of_match_ptr(ti_emif_of_match), + }, +}; +module_platform_driver(ti_emif_driver); + +MODULE_AUTHOR("Dave Gerlach "); +MODULE_DESCRIPTION("Texas Instruments SRAM EMIF driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/memory/ti-emif-sram-pm.S b/drivers/memory/ti-emif-sram-pm.S new file mode 100644 index 000000000000..a5369181e5c2 --- /dev/null +++ b/drivers/memory/ti-emif-sram-pm.S @@ -0,0 +1,334 @@ +/* + * Low level PM code for TI EMIF + * + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ + * Dave Gerlach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#include "emif.h" + +#define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES 0x00a0 +#define EMIF_POWER_MGMT_SR_TIMER_MASK 0x00f0 +#define EMIF_POWER_MGMT_SELF_REFRESH_MODE 0x0200 +#define EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK 0x0700 + +#define EMIF_SDCFG_TYPE_DDR2 0x2 << SDRAM_TYPE_SHIFT +#define EMIF_STATUS_READY 0x4 + +#define AM43XX_EMIF_PHY_CTRL_REG_COUNT 0x120 + +#define EMIF_AM437X_REGISTERS 0x1 + + .arm + .align 3 + +ENTRY(ti_emif_sram) + +/* + * void ti_emif_save_context(void) + * + * Used during suspend to save the context of all required EMIF registers + * to local memory if the EMIF is going to lose context during the sleep + * transition. Operates on the VIRTUAL address of the EMIF. + */ +ENTRY(ti_emif_save_context) + stmfd sp!, {r4 - r11, lr} @ save registers on stack + + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET] + ldr r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET] + + /* Save EMIF configuration */ + ldr r1, [r0, #EMIF_SDRAM_CONFIG] + str r1, [r2, #EMIF_SDCFG_VAL_OFFSET] + + ldr r1, [r0, #EMIF_SDRAM_REFRESH_CONTROL] + str r1, [r2, #EMIF_REF_CTRL_VAL_OFFSET] + + ldr r1, [r0, #EMIF_SDRAM_TIMING_1] + str r1, [r2, #EMIF_TIMING1_VAL_OFFSET] + + ldr r1, [r0, #EMIF_SDRAM_TIMING_2] + str r1, [r2, #EMIF_TIMING2_VAL_OFFSET] + + ldr r1, [r0, #EMIF_SDRAM_TIMING_3] + str r1, [r2, #EMIF_TIMING3_VAL_OFFSET] + + ldr r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + str r1, [r2, #EMIF_PMCR_VAL_OFFSET] + + ldr r1, [r0, #EMIF_POWER_MANAGEMENT_CTRL_SHDW] + str r1, [r2, #EMIF_PMCR_SHDW_VAL_OFFSET] + + ldr r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG] + str r1, [r2, #EMIF_ZQCFG_VAL_OFFSET] + + ldr r1, [r0, #EMIF_DDR_PHY_CTRL_1] + str r1, [r2, #EMIF_DDR_PHY_CTLR_1_OFFSET] + + ldr r1, [r0, #EMIF_COS_CONFIG] + str r1, [r2, #EMIF_COS_CONFIG_OFFSET] + + ldr r1, [r0, #EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING] + str r1, [r2, #EMIF_PRIORITY_TO_COS_MAPPING_OFFSET] + + ldr r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING] + str r1, [r2, #EMIF_CONNECT_ID_SERV_1_MAP_OFFSET] + + ldr r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING] + str r1, [r2, #EMIF_CONNECT_ID_SERV_2_MAP_OFFSET] + + ldr r1, [r0, #EMIF_OCP_CONFIG] + str r1, [r2, #EMIF_OCP_CONFIG_VAL_OFFSET] + + ldr r5, [r4, #EMIF_PM_CONFIG_OFFSET] + cmp r5, #EMIF_SRAM_AM43_REG_LAYOUT + bne emif_skip_save_extra_regs + + ldr r1, [r0, #EMIF_READ_WRITE_LEVELING_RAMP_CONTROL] + str r1, [r2, #EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET] + + ldr r1, [r0, #EMIF_READ_WRITE_EXECUTION_THRESHOLD] + str r1, [r2, #EMIF_RD_WR_EXEC_THRESH_OFFSET] + + ldr r1, [r0, #EMIF_LPDDR2_NVM_TIMING] + str r1, [r2, #EMIF_LPDDR2_NVM_TIM_OFFSET] + + ldr r1, [r0, #EMIF_LPDDR2_NVM_TIMING_SHDW] + str r1, [r2, #EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET] + + ldr r1, [r0, #EMIF_DLL_CALIB_CTRL] + str r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_OFFSET] + + ldr r1, [r0, #EMIF_DLL_CALIB_CTRL_SHDW] + str r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET] + + /* Loop and save entire block of emif phy regs */ + mov r5, #0x0 + add r4, r2, #EMIF_EXT_PHY_CTRL_VALS_OFFSET + add r3, r0, #EMIF_EXT_PHY_CTRL_1 +ddr_phy_ctrl_save: + ldr r1, [r3, r5] + str r1, [r4, r5] + add r5, r5, #0x4 + cmp r5, #AM43XX_EMIF_PHY_CTRL_REG_COUNT + bne ddr_phy_ctrl_save + +emif_skip_save_extra_regs: + ldmfd sp!, {r4 - r11, pc} @ restore regs and return +ENDPROC(ti_emif_save_context) + +/* + * void ti_emif_restore_context(void) + * + * Used during resume to restore the context of all required EMIF registers + * from local memory after the EMIF has lost context during a sleep transition. + * Operates on the PHYSICAL address of the EMIF. + */ +ENTRY(ti_emif_restore_context) + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET] + ldr r2, [r4, #EMIF_PM_REGS_PHYS_OFFSET] + + /* Config EMIF Timings */ + ldr r1, [r2, #EMIF_DDR_PHY_CTLR_1_OFFSET] + str r1, [r0, #EMIF_DDR_PHY_CTRL_1] + str r1, [r0, #EMIF_DDR_PHY_CTRL_1_SHDW] + + ldr r1, [r2, #EMIF_TIMING1_VAL_OFFSET] + str r1, [r0, #EMIF_SDRAM_TIMING_1] + str r1, [r0, #EMIF_SDRAM_TIMING_1_SHDW] + + ldr r1, [r2, #EMIF_TIMING2_VAL_OFFSET] + str r1, [r0, #EMIF_SDRAM_TIMING_2] + str r1, [r0, #EMIF_SDRAM_TIMING_2_SHDW] + + ldr r1, [r2, #EMIF_TIMING3_VAL_OFFSET] + str r1, [r0, #EMIF_SDRAM_TIMING_3] + str r1, [r0, #EMIF_SDRAM_TIMING_3_SHDW] + + ldr r1, [r2, #EMIF_REF_CTRL_VAL_OFFSET] + str r1, [r0, #EMIF_SDRAM_REFRESH_CONTROL] + str r1, [r0, #EMIF_SDRAM_REFRESH_CTRL_SHDW] + + ldr r1, [r2, #EMIF_PMCR_VAL_OFFSET] + str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + + ldr r1, [r2, #EMIF_PMCR_SHDW_VAL_OFFSET] + str r1, [r0, #EMIF_POWER_MANAGEMENT_CTRL_SHDW] + + ldr r1, [r2, #EMIF_COS_CONFIG_OFFSET] + str r1, [r0, #EMIF_COS_CONFIG] + + ldr r1, [r2, #EMIF_PRIORITY_TO_COS_MAPPING_OFFSET] + str r1, [r0, #EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING] + + ldr r1, [r2, #EMIF_CONNECT_ID_SERV_1_MAP_OFFSET] + str r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING] + + ldr r1, [r2, #EMIF_CONNECT_ID_SERV_2_MAP_OFFSET] + str r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING] + + ldr r1, [r2, #EMIF_OCP_CONFIG_VAL_OFFSET] + str r1, [r0, #EMIF_OCP_CONFIG] + + ldr r5, [r4, #EMIF_PM_CONFIG_OFFSET] + cmp r5, #EMIF_SRAM_AM43_REG_LAYOUT + bne emif_skip_restore_extra_regs + + ldr r1, [r2, #EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET] + str r1, [r0, #EMIF_READ_WRITE_LEVELING_RAMP_CONTROL] + + ldr r1, [r2, #EMIF_RD_WR_EXEC_THRESH_OFFSET] + str r1, [r0, #EMIF_READ_WRITE_EXECUTION_THRESHOLD] + + ldr r1, [r2, #EMIF_LPDDR2_NVM_TIM_OFFSET] + str r1, [r0, #EMIF_LPDDR2_NVM_TIMING] + + ldr r1, [r2, #EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET] + str r1, [r0, #EMIF_LPDDR2_NVM_TIMING_SHDW] + + ldr r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_OFFSET] + str r1, [r0, #EMIF_DLL_CALIB_CTRL] + + ldr r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET] + str r1, [r0, #EMIF_DLL_CALIB_CTRL_SHDW] + + ldr r1, [r2, #EMIF_ZQCFG_VAL_OFFSET] + str r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG] + + /* Loop and restore entire block of emif phy regs */ + mov r5, #0x0 + /* Load ti_emif_regs_amx3 + EMIF_EXT_PHY_CTRL_VALS_OFFSET for address + * to phy register save space + */ + add r3, r2, #EMIF_EXT_PHY_CTRL_VALS_OFFSET + add r4, r0, #EMIF_EXT_PHY_CTRL_1 +ddr_phy_ctrl_restore: + ldr r1, [r3, r5] + str r1, [r4, r5] + add r5, r5, #0x4 + cmp r5, #AM43XX_EMIF_PHY_CTRL_REG_COUNT + bne ddr_phy_ctrl_restore + +emif_skip_restore_extra_regs: + /* + * Output impedence calib needed only for DDR3 + * but since the initial state of this will be + * disabled for DDR2 no harm in restoring the + * old configuration + */ + ldr r1, [r2, #EMIF_ZQCFG_VAL_OFFSET] + str r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG] + + /* Write to sdcfg last for DDR2 only */ + ldr r1, [r2, #EMIF_SDCFG_VAL_OFFSET] + and r2, r1, #SDRAM_TYPE_MASK + cmp r2, #EMIF_SDCFG_TYPE_DDR2 + streq r1, [r0, #EMIF_SDRAM_CONFIG] + + mov pc, lr +ENDPROC(ti_emif_restore_context) + +/* + * void ti_emif_enter_sr(void) + * + * Programs the EMIF to tell the SDRAM to enter into self-refresh + * mode during a sleep transition. Operates on the VIRTUAL address + * of the EMIF. + */ +ENTRY(ti_emif_enter_sr) + stmfd sp!, {r4 - r11, lr} @ save registers on stack + + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET] + ldr r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET] + + ldr r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK + orr r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE + str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + + ldmfd sp!, {r4 - r11, pc} @ restore regs and return +ENDPROC(ti_emif_enter_sr) + +/* + * void ti_emif_exit_sr(void) + * + * Programs the EMIF to tell the SDRAM to exit self-refresh mode + * after a sleep transition. Operates on the PHYSICAL address of + * the EMIF. + */ +ENTRY(ti_emif_exit_sr) + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET] + ldr r2, [r4, #EMIF_PM_REGS_PHYS_OFFSET] + + /* + * Toggle EMIF to exit refresh mode: + * if EMIF lost context, PWR_MGT_CTRL is currently 0, writing disable + * (0x0), wont do diddly squat! so do a toggle from SR(0x2) to disable + * (0x0) here. + * *If* EMIF did not lose context, nothing broken as we write the same + * value(0x2) to reg before we write a disable (0x0). + */ + ldr r1, [r2, #EMIF_PMCR_VAL_OFFSET] + bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK + orr r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE + str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK + str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + + /* Wait for EMIF to become ready */ +1: ldr r1, [r0, #EMIF_STATUS] + tst r1, #EMIF_STATUS_READY + beq 1b + + mov pc, lr +ENDPROC(ti_emif_exit_sr) + +/* + * void ti_emif_abort_sr(void) + * + * Disables self-refresh after a failed transition to a low-power + * state so the kernel can jump back to DDR and follow abort path. + * Operates on the VIRTUAL address of the EMIF. + */ +ENTRY(ti_emif_abort_sr) + stmfd sp!, {r4 - r11, lr} @ save registers on stack + + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET] + ldr r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET] + + ldr r1, [r2, #EMIF_PMCR_VAL_OFFSET] + bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK + str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL] + + /* Wait for EMIF to become ready */ +1: ldr r1, [r0, #EMIF_STATUS] + tst r1, #EMIF_STATUS_READY + beq 1b + + ldmfd sp!, {r4 - r11, pc} @ restore regs and return +ENDPROC(ti_emif_abort_sr) + + .align 3 +ENTRY(ti_emif_pm_sram_data) + .space EMIF_PM_DATA_SIZE +ENTRY(ti_emif_sram_sz) + .word . - ti_emif_save_context diff --git a/drivers/of/platform.c b/drivers/of/platform.c index d67dbdab40d1..c00d81dfac0b 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -513,6 +513,12 @@ static int __init of_platform_default_populate_init(void) for_each_matching_node(node, reserved_mem_matches) of_platform_device_create(node, NULL, NULL); + node = of_find_node_by_path("/firmware"); + if (node) { + of_platform_populate(node, NULL, NULL, NULL); + of_node_put(node); + } + /* Populate everything else. */ of_platform_default_populate(NULL, NULL, NULL); diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 87147bcd1655..7da7b0f0ae1b 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -236,10 +236,8 @@ static int at91_cf_dt_init(struct platform_device *pdev) pdev->dev.platform_data = board; mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc"); - if (IS_ERR(mc)) - return PTR_ERR(mc); - return 0; + return PTR_ERR_OR_ZERO(mc); } #else static int at91_cf_dt_init(struct platform_device *pdev) diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 1d21c6f7d56c..da4292e9de97 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -566,17 +566,18 @@ EXPORT_SYMBOL_GPL(__devm_reset_control_get); * device_reset - find reset controller associated with the device * and perform reset * @dev: device to be reset by the controller + * @optional: whether it is optional to reset the device * - * Convenience wrapper for reset_control_get() and reset_control_reset(). + * Convenience wrapper for __reset_control_get() and reset_control_reset(). * This is useful for the common case of devices with single, dedicated reset * lines. */ -int device_reset(struct device *dev) +int __device_reset(struct device *dev, bool optional) { struct reset_control *rstc; int ret; - rstc = reset_control_get(dev, NULL); + rstc = __reset_control_get(dev, NULL, 0, 0, optional); if (IS_ERR(rstc)) return PTR_ERR(rstc); @@ -586,7 +587,7 @@ int device_reset(struct device *dev) return ret; } -EXPORT_SYMBOL_GPL(device_reset); +EXPORT_SYMBOL_GPL(__device_reset); /** * APIs to manage an array of reset controls. diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index c419a3753d00..93cbee1ae8ef 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -139,6 +139,8 @@ static const struct of_device_id meson_reset_dt_ids[] = { .data = &meson_reset_meson8_ops, }, { .compatible = "amlogic,meson-gxbb-reset", .data = &meson_reset_gx_ops, }, + { .compatible = "amlogic,meson-axg-reset", + .data = &meson_reset_gx_ops, }, { /* sentinel */ }, }; diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index fc9e98047421..c07b4a85253f 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -16,6 +16,7 @@ source "drivers/soc/tegra/Kconfig" source "drivers/soc/ti/Kconfig" source "drivers/soc/ux500/Kconfig" source "drivers/soc/versatile/Kconfig" +source "drivers/soc/xilinx/Kconfig" source "drivers/soc/zte/Kconfig" endmenu diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 342768df3530..40523577bdaa 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -23,4 +23,5 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_SOC_TI) += ti/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_PLAT_VERSATILE) += versatile/ +obj-y += xilinx/ obj-$(CONFIG_ARCH_ZX) += zte/ diff --git a/drivers/soc/actions/owl-sps.c b/drivers/soc/actions/owl-sps.c index 875225bfa21c..8477f0f18e24 100644 --- a/drivers/soc/actions/owl-sps.c +++ b/drivers/soc/actions/owl-sps.c @@ -17,6 +17,7 @@ #include #include #include +#include struct owl_sps_domain_info { const char *name; @@ -203,8 +204,49 @@ static const struct owl_sps_info s500_sps_info = { .domains = s500_sps_domains, }; +static const struct owl_sps_domain_info s700_sps_domains[] = { + [S700_PD_VDE] = { + .name = "VDE", + .pwr_bit = 0, + }, + [S700_PD_VCE_SI] = { + .name = "VCE_SI", + .pwr_bit = 1, + }, + [S700_PD_USB2_1] = { + .name = "USB2_1", + .pwr_bit = 2, + }, + [S700_PD_HDE] = { + .name = "HDE", + .pwr_bit = 7, + }, + [S700_PD_DMA] = { + .name = "DMA", + .pwr_bit = 8, + }, + [S700_PD_DS] = { + .name = "DS", + .pwr_bit = 9, + }, + [S700_PD_USB3] = { + .name = "USB3", + .pwr_bit = 10, + }, + [S700_PD_USB2_0] = { + .name = "USB2_0", + .pwr_bit = 11, + }, +}; + +static const struct owl_sps_info s700_sps_info = { + .num_domains = ARRAY_SIZE(s700_sps_domains), + .domains = s700_sps_domains, +}; + static const struct of_device_id owl_sps_of_matches[] = { { .compatible = "actions,s500-sps", .data = &s500_sps_info }, + { .compatible = "actions,s700-sps", .data = &s700_sps_info }, { } }; diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c index 3c39415d484f..6d89ebf13b8a 100644 --- a/drivers/soc/bcm/brcmstb/biuctrl.c +++ b/drivers/soc/bcm/brcmstb/biuctrl.c @@ -21,11 +21,70 @@ #include #include -#define CPU_CREDIT_REG_OFFSET 0x184 #define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000 +#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf +#define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK 0xf +#define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x) ((x) * 8) +#define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x) (((x) * 8) + 4) + +#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x) ((x) * 8) +#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK 0xff + +#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK 0xf +#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK 0xf +#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT 4 +#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE BIT(8) static void __iomem *cpubiuctrl_base; static bool mcp_wr_pairing_en; +static const int *cpubiuctrl_regs; + +static inline u32 cbc_readl(int reg) +{ + int offset = cpubiuctrl_regs[reg]; + + if (offset == -1) + return (u32)-1; + + return readl_relaxed(cpubiuctrl_base + offset); +} + +static inline void cbc_writel(u32 val, int reg) +{ + int offset = cpubiuctrl_regs[reg]; + + if (offset == -1) + return; + + writel_relaxed(val, cpubiuctrl_base + offset); +} + +enum cpubiuctrl_regs { + CPU_CREDIT_REG = 0, + CPU_MCP_FLOW_REG, + CPU_WRITEBACK_CTRL_REG +}; + +static const int b15_cpubiuctrl_regs[] = { + [CPU_CREDIT_REG] = 0x184, + [CPU_MCP_FLOW_REG] = -1, + [CPU_WRITEBACK_CTRL_REG] = -1, +}; + +/* Odd cases, e.g: 7260 */ +static const int b53_cpubiuctrl_no_wb_regs[] = { + [CPU_CREDIT_REG] = 0x0b0, + [CPU_MCP_FLOW_REG] = 0x0b4, + [CPU_WRITEBACK_CTRL_REG] = -1, +}; + +static const int b53_cpubiuctrl_regs[] = { + [CPU_CREDIT_REG] = 0x0b0, + [CPU_MCP_FLOW_REG] = 0x0b4, + [CPU_WRITEBACK_CTRL_REG] = 0x22c, +}; + +#define NUM_CPU_BIUCTRL_REGS 3 static int __init mcp_write_pairing_set(void) { @@ -34,15 +93,15 @@ static int __init mcp_write_pairing_set(void) if (!cpubiuctrl_base) return -1; - creds = readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET); + creds = cbc_readl(CPU_CREDIT_REG); if (mcp_wr_pairing_en) { pr_info("MCP: Enabling write pairing\n"); - writel_relaxed(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, - cpubiuctrl_base + CPU_CREDIT_REG_OFFSET); + cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, + CPU_CREDIT_REG); } else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) { pr_info("MCP: Disabling write pairing\n"); - writel_relaxed(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, - cpubiuctrl_base + CPU_CREDIT_REG_OFFSET); + cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK, + CPU_CREDIT_REG); } else { pr_info("MCP: Write pairing already disabled\n"); } @@ -50,17 +109,64 @@ static int __init mcp_write_pairing_set(void) return 0; } -static int __init setup_hifcpubiuctrl_regs(void) -{ - struct device_node *np; - int ret = 0; +static const u32 b53_mach_compat[] = { + 0x7268, + 0x7271, + 0x7278, +}; - np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); - if (!np) { - pr_err("missing BIU control node\n"); - return -ENODEV; +static void __init mcp_b53_set(void) +{ + unsigned int i; + u32 reg; + + reg = brcmstb_get_family_id(); + + for (i = 0; i < ARRAY_SIZE(b53_mach_compat); i++) { + if (BRCM_ID(reg) == b53_mach_compat[i]) + break; } + if (i == ARRAY_SIZE(b53_mach_compat)) + return; + + /* Set all 3 MCP interfaces to 8 credits */ + reg = cbc_readl(CPU_CREDIT_REG); + for (i = 0; i < 3; i++) { + reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK << + CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i)); + reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK << + CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i)); + reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i); + reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i); + } + cbc_writel(reg, CPU_CREDIT_REG); + + /* Max out the number of in-flight Jwords reads on the MCP interface */ + reg = cbc_readl(CPU_MCP_FLOW_REG); + for (i = 0; i < 3; i++) + reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK << + CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i); + cbc_writel(reg, CPU_MCP_FLOW_REG); + + /* Enable writeback throttling, set timeout to 128 cycles, 256 cycles + * threshold + */ + reg = cbc_readl(CPU_WRITEBACK_CTRL_REG); + reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE; + reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK; + reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK << + CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT); + reg |= 8; + reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT; + cbc_writel(reg, CPU_WRITEBACK_CTRL_REG); +} + +static int __init setup_hifcpubiuctrl_regs(struct device_node *np) +{ + struct device_node *cpu_dn; + int ret = 0; + cpubiuctrl_base = of_iomap(np, 0); if (!cpubiuctrl_base) { pr_err("failed to remap BIU control base\n"); @@ -69,27 +175,56 @@ static int __init setup_hifcpubiuctrl_regs(void) } mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing"); + + cpu_dn = of_get_cpu_node(0, NULL); + if (!cpu_dn) { + pr_err("failed to obtain CPU device node\n"); + ret = -ENODEV; + goto out; + } + + if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15")) + cpubiuctrl_regs = b15_cpubiuctrl_regs; + else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53")) + cpubiuctrl_regs = b53_cpubiuctrl_regs; + else { + pr_err("unsupported CPU\n"); + ret = -EINVAL; + } + of_node_put(cpu_dn); + + if (BRCM_ID(brcmstb_get_family_id()) == 0x7260) + cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs; out: of_node_put(np); return ret; } #ifdef CONFIG_PM_SLEEP -static u32 cpu_credit_reg_dump; /* for save/restore */ +static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS]; static int brcmstb_cpu_credit_reg_suspend(void) { - if (cpubiuctrl_base) - cpu_credit_reg_dump = - readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET); + unsigned int i; + + if (!cpubiuctrl_base) + return 0; + + for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++) + cpubiuctrl_reg_save[i] = cbc_readl(i); + return 0; } static void brcmstb_cpu_credit_reg_resume(void) { - if (cpubiuctrl_base) - writel_relaxed(cpu_credit_reg_dump, - cpubiuctrl_base + CPU_CREDIT_REG_OFFSET); + unsigned int i; + + if (!cpubiuctrl_base) + return; + + for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++) + cbc_writel(cpubiuctrl_reg_save[i], i); } static struct syscore_ops brcmstb_cpu_credit_syscore_ops = { @@ -99,19 +234,30 @@ static struct syscore_ops brcmstb_cpu_credit_syscore_ops = { #endif -void __init brcmstb_biuctrl_init(void) +static int __init brcmstb_biuctrl_init(void) { + struct device_node *np; int ret; - setup_hifcpubiuctrl_regs(); + /* We might be running on a multi-platform kernel, don't make this a + * fatal error, just bail out early + */ + np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl"); + if (!np) + return 0; + + setup_hifcpubiuctrl_regs(np); ret = mcp_write_pairing_set(); if (ret) { pr_err("MCP: Unable to disable write pairing!\n"); - return; + return ret; } + mcp_b53_set(); #ifdef CONFIG_PM_SLEEP register_syscore_ops(&brcmstb_cpu_credit_syscore_ops); #endif + return 0; } +early_initcall(brcmstb_biuctrl_init); diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c index a71730da6385..14185451901d 100644 --- a/drivers/soc/bcm/brcmstb/common.c +++ b/drivers/soc/bcm/brcmstb/common.c @@ -66,24 +66,47 @@ static const struct of_device_id sun_top_ctrl_match[] = { { } }; -static int __init brcmstb_soc_device_init(void) +static int __init brcmstb_soc_device_early_init(void) { - struct soc_device_attribute *soc_dev_attr; - struct soc_device *soc_dev; struct device_node *sun_top_ctrl; void __iomem *sun_top_ctrl_base; int ret = 0; + /* We could be on a multi-platform kernel, don't make this fatal but + * bail out early + */ sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match); if (!sun_top_ctrl) - return -ENODEV; + return ret; sun_top_ctrl_base = of_iomap(sun_top_ctrl, 0); - if (!sun_top_ctrl_base) - return -ENODEV; + if (!sun_top_ctrl_base) { + ret = -ENODEV; + goto out; + } family_id = readl(sun_top_ctrl_base); product_id = readl(sun_top_ctrl_base + 0x4); + iounmap(sun_top_ctrl_base); +out: + of_node_put(sun_top_ctrl); + return ret; +} +early_initcall(brcmstb_soc_device_early_init); + +static int __init brcmstb_soc_device_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct device_node *sun_top_ctrl; + struct soc_device *soc_dev; + int ret = 0; + + /* We could be on a multi-platform kernel, don't make this fatal but + * bail out early + */ + sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match); + if (!sun_top_ctrl) + return ret; soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) { @@ -107,14 +130,10 @@ static int __init brcmstb_soc_device_init(void) kfree(soc_dev_attr->soc_id); kfree(soc_dev_attr->revision); kfree(soc_dev_attr); - ret = -ENODEV; - goto out; + ret = -ENOMEM; } - - return 0; - out: - iounmap(sun_top_ctrl_base); + of_node_put(sun_top_ctrl); return ret; } arch_initcall(brcmstb_soc_device_init); diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c index d89a6a80c8ef..302e0c8d69d9 100644 --- a/drivers/soc/fsl/guts.c +++ b/drivers/soc/fsl/guts.c @@ -167,10 +167,16 @@ static int fsl_guts_probe(struct platform_device *pdev) } else { soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL, "QorIQ"); } + if (!soc_dev_attr.family) + return -ENOMEM; soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL, "svr:0x%08x", svr); + if (!soc_dev_attr.soc_id) + return -ENOMEM; soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d", (svr >> 4) & 0xf, svr & 0xf); + if (!soc_dev_attr.revision) + return -ENOMEM; soc_dev = soc_device_register(&soc_dev_attr); if (IS_ERR(soc_dev)) @@ -214,6 +220,8 @@ static const struct of_device_id fsl_guts_of_match[] = { { .compatible = "fsl,ls1043a-dcfg", }, { .compatible = "fsl,ls2080a-dcfg", }, { .compatible = "fsl,ls1088a-dcfg", }, + { .compatible = "fsl,ls1012a-dcfg", }, + { .compatible = "fsl,ls1046a-dcfg", }, {} }; MODULE_DEVICE_TABLE(of, fsl_guts_of_match); diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index 47e7aa963dbb..53f7275d6cbd 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -273,7 +273,15 @@ static struct imx_pm_domain imx_gpc_domains[] = { }, .reg_offs = 0x240, .cntr_pdn_bit = 4, - } + }, { + .base = { + .name = "PCI", + .power_off = imx6_pm_domain_power_off, + .power_on = imx6_pm_domain_power_on, + }, + .reg_offs = 0x200, + .cntr_pdn_bit = 6, + }, }; struct imx_gpc_dt_data { @@ -296,10 +304,16 @@ static const struct imx_gpc_dt_data imx6sl_dt_data = { .err009619_present = false, }; +static const struct imx_gpc_dt_data imx6sx_dt_data = { + .num_domains = 4, + .err009619_present = false, +}; + static const struct of_device_id imx_gpc_dt_ids[] = { { .compatible = "fsl,imx6q-gpc", .data = &imx6q_dt_data }, { .compatible = "fsl,imx6qp-gpc", .data = &imx6qp_dt_data }, { .compatible = "fsl,imx6sl-gpc", .data = &imx6sl_dt_data }, + { .compatible = "fsl,imx6sx-gpc", .data = &imx6sx_dt_data }, { } }; diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index b81374bb6713..e050eb83341d 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -35,6 +35,15 @@ config QCOM_PM modes. It interface with various system drivers to put the cores in low power modes. +config QCOM_QMI_HELPERS + tristate + depends on ARCH_QCOM + help + Helper library for handling QMI encoded messages. QMI encoded + messages are used in communication between the majority of QRTR + clients and this helpers provide the common functionality needed for + doing this from a kernel driver. + config QCOM_RMTFS_MEM tristate "Qualcomm Remote Filesystem memory driver" depends on ARCH_QCOM @@ -75,6 +84,7 @@ config QCOM_SMEM_STATE config QCOM_SMP2P tristate "Qualcomm Shared Memory Point to Point support" + depends on MAILBOX depends on QCOM_SMEM select QCOM_SMEM_STATE help diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 40c56f67e94a..dcebf2814e6d 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -3,6 +3,8 @@ obj-$(CONFIG_QCOM_GLINK_SSR) += glink_ssr.o obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o obj-$(CONFIG_QCOM_PM) += spm.o +obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o +qmi_helpers-y += qmi_encdec.o qmi_interface.o obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_mem.o obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o obj-$(CONFIG_QCOM_SMEM) += smem.o diff --git a/drivers/soc/qcom/qmi_encdec.c b/drivers/soc/qcom/qmi_encdec.c new file mode 100644 index 000000000000..3aaab71d1b2c --- /dev/null +++ b/drivers/soc/qcom/qmi_encdec.c @@ -0,0 +1,816 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2017 Linaro Ltd. + */ +#include +#include +#include +#include +#include +#include +#include + +#define QMI_ENCDEC_ENCODE_TLV(type, length, p_dst) do { \ + *p_dst++ = type; \ + *p_dst++ = ((u8)((length) & 0xFF)); \ + *p_dst++ = ((u8)(((length) >> 8) & 0xFF)); \ +} while (0) + +#define QMI_ENCDEC_DECODE_TLV(p_type, p_length, p_src) do { \ + *p_type = (u8)*p_src++; \ + *p_length = (u8)*p_src++; \ + *p_length |= ((u8)*p_src) << 8; \ +} while (0) + +#define QMI_ENCDEC_ENCODE_N_BYTES(p_dst, p_src, size) \ +do { \ + memcpy(p_dst, p_src, size); \ + p_dst = (u8 *)p_dst + size; \ + p_src = (u8 *)p_src + size; \ +} while (0) + +#define QMI_ENCDEC_DECODE_N_BYTES(p_dst, p_src, size) \ +do { \ + memcpy(p_dst, p_src, size); \ + p_dst = (u8 *)p_dst + size; \ + p_src = (u8 *)p_src + size; \ +} while (0) + +#define UPDATE_ENCODE_VARIABLES(temp_si, buf_dst, \ + encoded_bytes, tlv_len, encode_tlv, rc) \ +do { \ + buf_dst = (u8 *)buf_dst + rc; \ + encoded_bytes += rc; \ + tlv_len += rc; \ + temp_si = temp_si + 1; \ + encode_tlv = 1; \ +} while (0) + +#define UPDATE_DECODE_VARIABLES(buf_src, decoded_bytes, rc) \ +do { \ + buf_src = (u8 *)buf_src + rc; \ + decoded_bytes += rc; \ +} while (0) + +#define TLV_LEN_SIZE sizeof(u16) +#define TLV_TYPE_SIZE sizeof(u8) +#define OPTIONAL_TLV_TYPE_START 0x10 + +static int qmi_encode(struct qmi_elem_info *ei_array, void *out_buf, + const void *in_c_struct, u32 out_buf_len, + int enc_level); + +static int qmi_decode(struct qmi_elem_info *ei_array, void *out_c_struct, + const void *in_buf, u32 in_buf_len, int dec_level); + +/** + * skip_to_next_elem() - Skip to next element in the structure to be encoded + * @ei_array: Struct info describing the element to be skipped. + * @level: Depth level of encoding/decoding to identify nested structures. + * + * This function is used while encoding optional elements. If the flag + * corresponding to an optional element is not set, then encoding the + * optional element can be skipped. This function can be used to perform + * that operation. + * + * Return: struct info of the next element that can be encoded. + */ +static struct qmi_elem_info *skip_to_next_elem(struct qmi_elem_info *ei_array, + int level) +{ + struct qmi_elem_info *temp_ei = ei_array; + u8 tlv_type; + + if (level > 1) { + temp_ei = temp_ei + 1; + } else { + do { + tlv_type = temp_ei->tlv_type; + temp_ei = temp_ei + 1; + } while (tlv_type == temp_ei->tlv_type); + } + + return temp_ei; +} + +/** + * qmi_calc_min_msg_len() - Calculate the minimum length of a QMI message + * @ei_array: Struct info array describing the structure. + * @level: Level to identify the depth of the nested structures. + * + * Return: Expected minimum length of the QMI message or 0 on error. + */ +static int qmi_calc_min_msg_len(struct qmi_elem_info *ei_array, + int level) +{ + int min_msg_len = 0; + struct qmi_elem_info *temp_ei = ei_array; + + if (!ei_array) + return min_msg_len; + + while (temp_ei->data_type != QMI_EOTI) { + /* Optional elements do not count in minimum length */ + if (temp_ei->data_type == QMI_OPT_FLAG) { + temp_ei = skip_to_next_elem(temp_ei, level); + continue; + } + + if (temp_ei->data_type == QMI_DATA_LEN) { + min_msg_len += (temp_ei->elem_size == sizeof(u8) ? + sizeof(u8) : sizeof(u16)); + temp_ei++; + continue; + } else if (temp_ei->data_type == QMI_STRUCT) { + min_msg_len += qmi_calc_min_msg_len(temp_ei->ei_array, + (level + 1)); + temp_ei++; + } else if (temp_ei->data_type == QMI_STRING) { + if (level > 1) + min_msg_len += temp_ei->elem_len <= U8_MAX ? + sizeof(u8) : sizeof(u16); + min_msg_len += temp_ei->elem_len * temp_ei->elem_size; + temp_ei++; + } else { + min_msg_len += (temp_ei->elem_len * temp_ei->elem_size); + temp_ei++; + } + + /* + * Type & Length info. not prepended for elements in the + * nested structure. + */ + if (level == 1) + min_msg_len += (TLV_TYPE_SIZE + TLV_LEN_SIZE); + } + + return min_msg_len; +} + +/** + * qmi_encode_basic_elem() - Encodes elements of basic/primary data type + * @buf_dst: Buffer to store the encoded information. + * @buf_src: Buffer containing the elements to be encoded. + * @elem_len: Number of elements, in the buf_src, to be encoded. + * @elem_size: Size of a single instance of the element to be encoded. + * + * This function encodes the "elem_len" number of data elements, each of + * size "elem_size" bytes from the source buffer "buf_src" and stores the + * encoded information in the destination buffer "buf_dst". The elements are + * of primary data type which include u8 - u64 or similar. This + * function returns the number of bytes of encoded information. + * + * Return: The number of bytes of encoded information. + */ +static int qmi_encode_basic_elem(void *buf_dst, const void *buf_src, + u32 elem_len, u32 elem_size) +{ + u32 i, rc = 0; + + for (i = 0; i < elem_len; i++) { + QMI_ENCDEC_ENCODE_N_BYTES(buf_dst, buf_src, elem_size); + rc += elem_size; + } + + return rc; +} + +/** + * qmi_encode_struct_elem() - Encodes elements of struct data type + * @ei_array: Struct info array descibing the struct element. + * @buf_dst: Buffer to store the encoded information. + * @buf_src: Buffer containing the elements to be encoded. + * @elem_len: Number of elements, in the buf_src, to be encoded. + * @out_buf_len: Available space in the encode buffer. + * @enc_level: Depth of the nested structure from the main structure. + * + * This function encodes the "elem_len" number of struct elements, each of + * size "ei_array->elem_size" bytes from the source buffer "buf_src" and + * stores the encoded information in the destination buffer "buf_dst". The + * elements are of struct data type which includes any C structure. This + * function returns the number of bytes of encoded information. + * + * Return: The number of bytes of encoded information on success or negative + * errno on error. + */ +static int qmi_encode_struct_elem(struct qmi_elem_info *ei_array, + void *buf_dst, const void *buf_src, + u32 elem_len, u32 out_buf_len, + int enc_level) +{ + int i, rc, encoded_bytes = 0; + struct qmi_elem_info *temp_ei = ei_array; + + for (i = 0; i < elem_len; i++) { + rc = qmi_encode(temp_ei->ei_array, buf_dst, buf_src, + out_buf_len - encoded_bytes, enc_level); + if (rc < 0) { + pr_err("%s: STRUCT Encode failure\n", __func__); + return rc; + } + buf_dst = buf_dst + rc; + buf_src = buf_src + temp_ei->elem_size; + encoded_bytes += rc; + } + + return encoded_bytes; +} + +/** + * qmi_encode_string_elem() - Encodes elements of string data type + * @ei_array: Struct info array descibing the string element. + * @buf_dst: Buffer to store the encoded information. + * @buf_src: Buffer containing the elements to be encoded. + * @out_buf_len: Available space in the encode buffer. + * @enc_level: Depth of the string element from the main structure. + * + * This function encodes a string element of maximum length "ei_array->elem_len" + * bytes from the source buffer "buf_src" and stores the encoded information in + * the destination buffer "buf_dst". This function returns the number of bytes + * of encoded information. + * + * Return: The number of bytes of encoded information on success or negative + * errno on error. + */ +static int qmi_encode_string_elem(struct qmi_elem_info *ei_array, + void *buf_dst, const void *buf_src, + u32 out_buf_len, int enc_level) +{ + int rc; + int encoded_bytes = 0; + struct qmi_elem_info *temp_ei = ei_array; + u32 string_len = 0; + u32 string_len_sz = 0; + + string_len = strlen(buf_src); + string_len_sz = temp_ei->elem_len <= U8_MAX ? + sizeof(u8) : sizeof(u16); + if (string_len > temp_ei->elem_len) { + pr_err("%s: String to be encoded is longer - %d > %d\n", + __func__, string_len, temp_ei->elem_len); + return -EINVAL; + } + + if (enc_level == 1) { + if (string_len + TLV_LEN_SIZE + TLV_TYPE_SIZE > + out_buf_len) { + pr_err("%s: Output len %d > Out Buf len %d\n", + __func__, string_len, out_buf_len); + return -ETOOSMALL; + } + } else { + if (string_len + string_len_sz > out_buf_len) { + pr_err("%s: Output len %d > Out Buf len %d\n", + __func__, string_len, out_buf_len); + return -ETOOSMALL; + } + rc = qmi_encode_basic_elem(buf_dst, &string_len, + 1, string_len_sz); + encoded_bytes += rc; + } + + rc = qmi_encode_basic_elem(buf_dst + encoded_bytes, buf_src, + string_len, temp_ei->elem_size); + encoded_bytes += rc; + + return encoded_bytes; +} + +/** + * qmi_encode() - Core Encode Function + * @ei_array: Struct info array describing the structure to be encoded. + * @out_buf: Buffer to hold the encoded QMI message. + * @in_c_struct: Pointer to the C structure to be encoded. + * @out_buf_len: Available space in the encode buffer. + * @enc_level: Encode level to indicate the depth of the nested structure, + * within the main structure, being encoded. + * + * Return: The number of bytes of encoded information on success or negative + * errno on error. + */ +static int qmi_encode(struct qmi_elem_info *ei_array, void *out_buf, + const void *in_c_struct, u32 out_buf_len, + int enc_level) +{ + struct qmi_elem_info *temp_ei = ei_array; + u8 opt_flag_value = 0; + u32 data_len_value = 0, data_len_sz; + u8 *buf_dst = (u8 *)out_buf; + u8 *tlv_pointer; + u32 tlv_len; + u8 tlv_type; + u32 encoded_bytes = 0; + const void *buf_src; + int encode_tlv = 0; + int rc; + + if (!ei_array) + return 0; + + tlv_pointer = buf_dst; + tlv_len = 0; + if (enc_level == 1) + buf_dst = buf_dst + (TLV_LEN_SIZE + TLV_TYPE_SIZE); + + while (temp_ei->data_type != QMI_EOTI) { + buf_src = in_c_struct + temp_ei->offset; + tlv_type = temp_ei->tlv_type; + + if (temp_ei->array_type == NO_ARRAY) { + data_len_value = 1; + } else if (temp_ei->array_type == STATIC_ARRAY) { + data_len_value = temp_ei->elem_len; + } else if (data_len_value <= 0 || + temp_ei->elem_len < data_len_value) { + pr_err("%s: Invalid data length\n", __func__); + return -EINVAL; + } + + switch (temp_ei->data_type) { + case QMI_OPT_FLAG: + rc = qmi_encode_basic_elem(&opt_flag_value, buf_src, + 1, sizeof(u8)); + if (opt_flag_value) + temp_ei = temp_ei + 1; + else + temp_ei = skip_to_next_elem(temp_ei, enc_level); + break; + + case QMI_DATA_LEN: + memcpy(&data_len_value, buf_src, temp_ei->elem_size); + data_len_sz = temp_ei->elem_size == sizeof(u8) ? + sizeof(u8) : sizeof(u16); + /* Check to avoid out of range buffer access */ + if ((data_len_sz + encoded_bytes + TLV_LEN_SIZE + + TLV_TYPE_SIZE) > out_buf_len) { + pr_err("%s: Too Small Buffer @DATA_LEN\n", + __func__); + return -ETOOSMALL; + } + rc = qmi_encode_basic_elem(buf_dst, &data_len_value, + 1, data_len_sz); + UPDATE_ENCODE_VARIABLES(temp_ei, buf_dst, + encoded_bytes, tlv_len, + encode_tlv, rc); + if (!data_len_value) + temp_ei = skip_to_next_elem(temp_ei, enc_level); + else + encode_tlv = 0; + break; + + case QMI_UNSIGNED_1_BYTE: + case QMI_UNSIGNED_2_BYTE: + case QMI_UNSIGNED_4_BYTE: + case QMI_UNSIGNED_8_BYTE: + case QMI_SIGNED_2_BYTE_ENUM: + case QMI_SIGNED_4_BYTE_ENUM: + /* Check to avoid out of range buffer access */ + if (((data_len_value * temp_ei->elem_size) + + encoded_bytes + TLV_LEN_SIZE + TLV_TYPE_SIZE) > + out_buf_len) { + pr_err("%s: Too Small Buffer @data_type:%d\n", + __func__, temp_ei->data_type); + return -ETOOSMALL; + } + rc = qmi_encode_basic_elem(buf_dst, buf_src, + data_len_value, + temp_ei->elem_size); + UPDATE_ENCODE_VARIABLES(temp_ei, buf_dst, + encoded_bytes, tlv_len, + encode_tlv, rc); + break; + + case QMI_STRUCT: + rc = qmi_encode_struct_elem(temp_ei, buf_dst, buf_src, + data_len_value, + out_buf_len - encoded_bytes, + enc_level + 1); + if (rc < 0) + return rc; + UPDATE_ENCODE_VARIABLES(temp_ei, buf_dst, + encoded_bytes, tlv_len, + encode_tlv, rc); + break; + + case QMI_STRING: + rc = qmi_encode_string_elem(temp_ei, buf_dst, buf_src, + out_buf_len - encoded_bytes, + enc_level); + if (rc < 0) + return rc; + UPDATE_ENCODE_VARIABLES(temp_ei, buf_dst, + encoded_bytes, tlv_len, + encode_tlv, rc); + break; + default: + pr_err("%s: Unrecognized data type\n", __func__); + return -EINVAL; + } + + if (encode_tlv && enc_level == 1) { + QMI_ENCDEC_ENCODE_TLV(tlv_type, tlv_len, tlv_pointer); + encoded_bytes += (TLV_TYPE_SIZE + TLV_LEN_SIZE); + tlv_pointer = buf_dst; + tlv_len = 0; + buf_dst = buf_dst + TLV_LEN_SIZE + TLV_TYPE_SIZE; + encode_tlv = 0; + } + } + + return encoded_bytes; +} + +/** + * qmi_decode_basic_elem() - Decodes elements of basic/primary data type + * @buf_dst: Buffer to store the decoded element. + * @buf_src: Buffer containing the elements in QMI wire format. + * @elem_len: Number of elements to be decoded. + * @elem_size: Size of a single instance of the element to be decoded. + * + * This function decodes the "elem_len" number of elements in QMI wire format, + * each of size "elem_size" bytes from the source buffer "buf_src" and stores + * the decoded elements in the destination buffer "buf_dst". The elements are + * of primary data type which include u8 - u64 or similar. This + * function returns the number of bytes of decoded information. + * + * Return: The total size of the decoded data elements, in bytes. + */ +static int qmi_decode_basic_elem(void *buf_dst, const void *buf_src, + u32 elem_len, u32 elem_size) +{ + u32 i, rc = 0; + + for (i = 0; i < elem_len; i++) { + QMI_ENCDEC_DECODE_N_BYTES(buf_dst, buf_src, elem_size); + rc += elem_size; + } + + return rc; +} + +/** + * qmi_decode_struct_elem() - Decodes elements of struct data type + * @ei_array: Struct info array descibing the struct element. + * @buf_dst: Buffer to store the decoded element. + * @buf_src: Buffer containing the elements in QMI wire format. + * @elem_len: Number of elements to be decoded. + * @tlv_len: Total size of the encoded inforation corresponding to + * this struct element. + * @dec_level: Depth of the nested structure from the main structure. + * + * This function decodes the "elem_len" number of elements in QMI wire format, + * each of size "(tlv_len/elem_len)" bytes from the source buffer "buf_src" + * and stores the decoded elements in the destination buffer "buf_dst". The + * elements are of struct data type which includes any C structure. This + * function returns the number of bytes of decoded information. + * + * Return: The total size of the decoded data elements on success, negative + * errno on error. + */ +static int qmi_decode_struct_elem(struct qmi_elem_info *ei_array, + void *buf_dst, const void *buf_src, + u32 elem_len, u32 tlv_len, + int dec_level) +{ + int i, rc, decoded_bytes = 0; + struct qmi_elem_info *temp_ei = ei_array; + + for (i = 0; i < elem_len && decoded_bytes < tlv_len; i++) { + rc = qmi_decode(temp_ei->ei_array, buf_dst, buf_src, + tlv_len - decoded_bytes, dec_level); + if (rc < 0) + return rc; + buf_src = buf_src + rc; + buf_dst = buf_dst + temp_ei->elem_size; + decoded_bytes += rc; + } + + if ((dec_level <= 2 && decoded_bytes != tlv_len) || + (dec_level > 2 && (i < elem_len || decoded_bytes > tlv_len))) { + pr_err("%s: Fault in decoding: dl(%d), db(%d), tl(%d), i(%d), el(%d)\n", + __func__, dec_level, decoded_bytes, tlv_len, + i, elem_len); + return -EFAULT; + } + + return decoded_bytes; +} + +/** + * qmi_decode_string_elem() - Decodes elements of string data type + * @ei_array: Struct info array descibing the string element. + * @buf_dst: Buffer to store the decoded element. + * @buf_src: Buffer containing the elements in QMI wire format. + * @tlv_len: Total size of the encoded inforation corresponding to + * this string element. + * @dec_level: Depth of the string element from the main structure. + * + * This function decodes the string element of maximum length + * "ei_array->elem_len" from the source buffer "buf_src" and puts it into + * the destination buffer "buf_dst". This function returns number of bytes + * decoded from the input buffer. + * + * Return: The total size of the decoded data elements on success, negative + * errno on error. + */ +static int qmi_decode_string_elem(struct qmi_elem_info *ei_array, + void *buf_dst, const void *buf_src, + u32 tlv_len, int dec_level) +{ + int rc; + int decoded_bytes = 0; + u32 string_len = 0; + u32 string_len_sz = 0; + struct qmi_elem_info *temp_ei = ei_array; + + if (dec_level == 1) { + string_len = tlv_len; + } else { + string_len_sz = temp_ei->elem_len <= U8_MAX ? + sizeof(u8) : sizeof(u16); + rc = qmi_decode_basic_elem(&string_len, buf_src, + 1, string_len_sz); + decoded_bytes += rc; + } + + if (string_len > temp_ei->elem_len) { + pr_err("%s: String len %d > Max Len %d\n", + __func__, string_len, temp_ei->elem_len); + return -ETOOSMALL; + } else if (string_len > tlv_len) { + pr_err("%s: String len %d > Input Buffer Len %d\n", + __func__, string_len, tlv_len); + return -EFAULT; + } + + rc = qmi_decode_basic_elem(buf_dst, buf_src + decoded_bytes, + string_len, temp_ei->elem_size); + *((char *)buf_dst + string_len) = '\0'; + decoded_bytes += rc; + + return decoded_bytes; +} + +/** + * find_ei() - Find element info corresponding to TLV Type + * @ei_array: Struct info array of the message being decoded. + * @type: TLV Type of the element being searched. + * + * Every element that got encoded in the QMI message will have a type + * information associated with it. While decoding the QMI message, + * this function is used to find the struct info regarding the element + * that corresponds to the type being decoded. + * + * Return: Pointer to struct info, if found + */ +static struct qmi_elem_info *find_ei(struct qmi_elem_info *ei_array, + u32 type) +{ + struct qmi_elem_info *temp_ei = ei_array; + + while (temp_ei->data_type != QMI_EOTI) { + if (temp_ei->tlv_type == (u8)type) + return temp_ei; + temp_ei = temp_ei + 1; + } + + return NULL; +} + +/** + * qmi_decode() - Core Decode Function + * @ei_array: Struct info array describing the structure to be decoded. + * @out_c_struct: Buffer to hold the decoded C struct + * @in_buf: Buffer containing the QMI message to be decoded + * @in_buf_len: Length of the QMI message to be decoded + * @dec_level: Decode level to indicate the depth of the nested structure, + * within the main structure, being decoded + * + * Return: The number of bytes of decoded information on success, negative + * errno on error. + */ +static int qmi_decode(struct qmi_elem_info *ei_array, void *out_c_struct, + const void *in_buf, u32 in_buf_len, + int dec_level) +{ + struct qmi_elem_info *temp_ei = ei_array; + u8 opt_flag_value = 1; + u32 data_len_value = 0, data_len_sz = 0; + u8 *buf_dst = out_c_struct; + const u8 *tlv_pointer; + u32 tlv_len = 0; + u32 tlv_type; + u32 decoded_bytes = 0; + const void *buf_src = in_buf; + int rc; + + while (decoded_bytes < in_buf_len) { + if (dec_level >= 2 && temp_ei->data_type == QMI_EOTI) + return decoded_bytes; + + if (dec_level == 1) { + tlv_pointer = buf_src; + QMI_ENCDEC_DECODE_TLV(&tlv_type, + &tlv_len, tlv_pointer); + buf_src += (TLV_TYPE_SIZE + TLV_LEN_SIZE); + decoded_bytes += (TLV_TYPE_SIZE + TLV_LEN_SIZE); + temp_ei = find_ei(ei_array, tlv_type); + if (!temp_ei && tlv_type < OPTIONAL_TLV_TYPE_START) { + pr_err("%s: Inval element info\n", __func__); + return -EINVAL; + } else if (!temp_ei) { + UPDATE_DECODE_VARIABLES(buf_src, + decoded_bytes, tlv_len); + continue; + } + } else { + /* + * No length information for elements in nested + * structures. So use remaining decodable buffer space. + */ + tlv_len = in_buf_len - decoded_bytes; + } + + buf_dst = out_c_struct + temp_ei->offset; + if (temp_ei->data_type == QMI_OPT_FLAG) { + memcpy(buf_dst, &opt_flag_value, sizeof(u8)); + temp_ei = temp_ei + 1; + buf_dst = out_c_struct + temp_ei->offset; + } + + if (temp_ei->data_type == QMI_DATA_LEN) { + data_len_sz = temp_ei->elem_size == sizeof(u8) ? + sizeof(u8) : sizeof(u16); + rc = qmi_decode_basic_elem(&data_len_value, buf_src, + 1, data_len_sz); + memcpy(buf_dst, &data_len_value, sizeof(u32)); + temp_ei = temp_ei + 1; + buf_dst = out_c_struct + temp_ei->offset; + tlv_len -= data_len_sz; + UPDATE_DECODE_VARIABLES(buf_src, decoded_bytes, rc); + } + + if (temp_ei->array_type == NO_ARRAY) { + data_len_value = 1; + } else if (temp_ei->array_type == STATIC_ARRAY) { + data_len_value = temp_ei->elem_len; + } else if (data_len_value > temp_ei->elem_len) { + pr_err("%s: Data len %d > max spec %d\n", + __func__, data_len_value, temp_ei->elem_len); + return -ETOOSMALL; + } + + switch (temp_ei->data_type) { + case QMI_UNSIGNED_1_BYTE: + case QMI_UNSIGNED_2_BYTE: + case QMI_UNSIGNED_4_BYTE: + case QMI_UNSIGNED_8_BYTE: + case QMI_SIGNED_2_BYTE_ENUM: + case QMI_SIGNED_4_BYTE_ENUM: + rc = qmi_decode_basic_elem(buf_dst, buf_src, + data_len_value, + temp_ei->elem_size); + UPDATE_DECODE_VARIABLES(buf_src, decoded_bytes, rc); + break; + + case QMI_STRUCT: + rc = qmi_decode_struct_elem(temp_ei, buf_dst, buf_src, + data_len_value, tlv_len, + dec_level + 1); + if (rc < 0) + return rc; + UPDATE_DECODE_VARIABLES(buf_src, decoded_bytes, rc); + break; + + case QMI_STRING: + rc = qmi_decode_string_elem(temp_ei, buf_dst, buf_src, + tlv_len, dec_level); + if (rc < 0) + return rc; + UPDATE_DECODE_VARIABLES(buf_src, decoded_bytes, rc); + break; + + default: + pr_err("%s: Unrecognized data type\n", __func__); + return -EINVAL; + } + temp_ei = temp_ei + 1; + } + + return decoded_bytes; +} + +/** + * qmi_encode_message() - Encode C structure as QMI encoded message + * @type: Type of QMI message + * @msg_id: Message ID of the message + * @len: Passed as max length of the message, updated to actual size + * @txn_id: Transaction ID + * @ei: QMI message descriptor + * @c_struct: Reference to structure to encode + * + * Return: Buffer with encoded message, or negative ERR_PTR() on error + */ +void *qmi_encode_message(int type, unsigned int msg_id, size_t *len, + unsigned int txn_id, struct qmi_elem_info *ei, + const void *c_struct) +{ + struct qmi_header *hdr; + ssize_t msglen = 0; + void *msg; + int ret; + + /* Check the possibility of a zero length QMI message */ + if (!c_struct) { + ret = qmi_calc_min_msg_len(ei, 1); + if (ret) { + pr_err("%s: Calc. len %d != 0, but NULL c_struct\n", + __func__, ret); + return ERR_PTR(-EINVAL); + } + } + + msg = kzalloc(sizeof(*hdr) + *len, GFP_KERNEL); + if (!msg) + return ERR_PTR(-ENOMEM); + + /* Encode message, if we have a message */ + if (c_struct) { + msglen = qmi_encode(ei, msg + sizeof(*hdr), c_struct, *len, 1); + if (msglen < 0) { + kfree(msg); + return ERR_PTR(msglen); + } + } + + hdr = msg; + hdr->type = type; + hdr->txn_id = txn_id; + hdr->msg_id = msg_id; + hdr->msg_len = msglen; + + *len = sizeof(*hdr) + msglen; + + return msg; +} +EXPORT_SYMBOL(qmi_encode_message); + +/** + * qmi_decode_message() - Decode QMI encoded message to C structure + * @buf: Buffer with encoded message + * @len: Amount of data in @buf + * @ei: QMI message descriptor + * @c_struct: Reference to structure to decode into + * + * Return: The number of bytes of decoded information on success, negative + * errno on error. + */ +int qmi_decode_message(const void *buf, size_t len, + struct qmi_elem_info *ei, void *c_struct) +{ + if (!ei) + return -EINVAL; + + if (!c_struct || !buf || !len) + return -EINVAL; + + return qmi_decode(ei, c_struct, buf + sizeof(struct qmi_header), + len - sizeof(struct qmi_header), 1); +} +EXPORT_SYMBOL(qmi_decode_message); + +/* Common header in all QMI responses */ +struct qmi_elem_info qmi_response_type_v01_ei[] = { + { + .data_type = QMI_SIGNED_2_BYTE_ENUM, + .elem_len = 1, + .elem_size = sizeof(u16), + .array_type = NO_ARRAY, + .tlv_type = QMI_COMMON_TLV_TYPE, + .offset = offsetof(struct qmi_response_type_v01, result), + .ei_array = NULL, + }, + { + .data_type = QMI_SIGNED_2_BYTE_ENUM, + .elem_len = 1, + .elem_size = sizeof(u16), + .array_type = NO_ARRAY, + .tlv_type = QMI_COMMON_TLV_TYPE, + .offset = offsetof(struct qmi_response_type_v01, error), + .ei_array = NULL, + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = QMI_COMMON_TLV_TYPE, + .offset = 0, + .ei_array = NULL, + }, +}; +EXPORT_SYMBOL(qmi_response_type_v01_ei); + +MODULE_DESCRIPTION("QMI encoder/decoder helper"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/qmi_interface.c b/drivers/soc/qcom/qmi_interface.c new file mode 100644 index 000000000000..877611d5c42b --- /dev/null +++ b/drivers/soc/qcom/qmi_interface.c @@ -0,0 +1,848 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Linaro Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct socket *qmi_sock_create(struct qmi_handle *qmi, + struct sockaddr_qrtr *sq); + +/** + * qmi_recv_new_server() - handler of NEW_SERVER control message + * @qmi: qmi handle + * @service: service id of the new server + * @instance: instance id of the new server + * @node: node of the new server + * @port: port of the new server + * + * Calls the new_server callback to inform the client about a newly registered + * server matching the currently registered service lookup. + */ +static void qmi_recv_new_server(struct qmi_handle *qmi, + unsigned int service, unsigned int instance, + unsigned int node, unsigned int port) +{ + struct qmi_ops *ops = &qmi->ops; + struct qmi_service *svc; + int ret; + + if (!ops->new_server) + return; + + /* Ignore EOF marker */ + if (!node && !port) + return; + + svc = kzalloc(sizeof(*svc), GFP_KERNEL); + if (!svc) + return; + + svc->service = service; + svc->version = instance & 0xff; + svc->instance = instance >> 8; + svc->node = node; + svc->port = port; + + ret = ops->new_server(qmi, svc); + if (ret < 0) + kfree(svc); + else + list_add(&svc->list_node, &qmi->lookup_results); +} + +/** + * qmi_recv_del_server() - handler of DEL_SERVER control message + * @qmi: qmi handle + * @node: node of the dying server, a value of -1 matches all nodes + * @port: port of the dying server, a value of -1 matches all ports + * + * Calls the del_server callback for each previously seen server, allowing the + * client to react to the disappearing server. + */ +static void qmi_recv_del_server(struct qmi_handle *qmi, + unsigned int node, unsigned int port) +{ + struct qmi_ops *ops = &qmi->ops; + struct qmi_service *svc; + struct qmi_service *tmp; + + list_for_each_entry_safe(svc, tmp, &qmi->lookup_results, list_node) { + if (node != -1 && svc->node != node) + continue; + if (port != -1 && svc->port != port) + continue; + + if (ops->del_server) + ops->del_server(qmi, svc); + + list_del(&svc->list_node); + kfree(svc); + } +} + +/** + * qmi_recv_bye() - handler of BYE control message + * @qmi: qmi handle + * @node: id of the dying node + * + * Signals the client that all previously registered services on this node are + * now gone and then calls the bye callback to allow the client client further + * cleaning up resources associated with this remote. + */ +static void qmi_recv_bye(struct qmi_handle *qmi, + unsigned int node) +{ + struct qmi_ops *ops = &qmi->ops; + + qmi_recv_del_server(qmi, node, -1); + + if (ops->bye) + ops->bye(qmi, node); +} + +/** + * qmi_recv_del_client() - handler of DEL_CLIENT control message + * @qmi: qmi handle + * @node: node of the dying client + * @port: port of the dying client + * + * Signals the client about a dying client, by calling the del_client callback. + */ +static void qmi_recv_del_client(struct qmi_handle *qmi, + unsigned int node, unsigned int port) +{ + struct qmi_ops *ops = &qmi->ops; + + if (ops->del_client) + ops->del_client(qmi, node, port); +} + +static void qmi_recv_ctrl_pkt(struct qmi_handle *qmi, + const void *buf, size_t len) +{ + const struct qrtr_ctrl_pkt *pkt = buf; + + if (len < sizeof(struct qrtr_ctrl_pkt)) { + pr_debug("ignoring short control packet\n"); + return; + } + + switch (le32_to_cpu(pkt->cmd)) { + case QRTR_TYPE_BYE: + qmi_recv_bye(qmi, le32_to_cpu(pkt->client.node)); + break; + case QRTR_TYPE_NEW_SERVER: + qmi_recv_new_server(qmi, + le32_to_cpu(pkt->server.service), + le32_to_cpu(pkt->server.instance), + le32_to_cpu(pkt->server.node), + le32_to_cpu(pkt->server.port)); + break; + case QRTR_TYPE_DEL_SERVER: + qmi_recv_del_server(qmi, + le32_to_cpu(pkt->server.node), + le32_to_cpu(pkt->server.port)); + break; + case QRTR_TYPE_DEL_CLIENT: + qmi_recv_del_client(qmi, + le32_to_cpu(pkt->client.node), + le32_to_cpu(pkt->client.port)); + break; + } +} + +static void qmi_send_new_lookup(struct qmi_handle *qmi, struct qmi_service *svc) +{ + struct qrtr_ctrl_pkt pkt; + struct sockaddr_qrtr sq; + struct msghdr msg = { }; + struct kvec iv = { &pkt, sizeof(pkt) }; + int ret; + + memset(&pkt, 0, sizeof(pkt)); + pkt.cmd = cpu_to_le32(QRTR_TYPE_NEW_LOOKUP); + pkt.server.service = cpu_to_le32(svc->service); + pkt.server.instance = cpu_to_le32(svc->version | svc->instance << 8); + + sq.sq_family = qmi->sq.sq_family; + sq.sq_node = qmi->sq.sq_node; + sq.sq_port = QRTR_PORT_CTRL; + + msg.msg_name = &sq; + msg.msg_namelen = sizeof(sq); + + mutex_lock(&qmi->sock_lock); + if (qmi->sock) { + ret = kernel_sendmsg(qmi->sock, &msg, &iv, 1, sizeof(pkt)); + if (ret < 0) + pr_err("failed to send lookup registration: %d\n", ret); + } + mutex_unlock(&qmi->sock_lock); +} + +/** + * qmi_add_lookup() - register a new lookup with the name service + * @qmi: qmi handle + * @service: service id of the request + * @instance: instance id of the request + * @version: version number of the request + * + * Registering a lookup query with the name server will cause the name server + * to send NEW_SERVER and DEL_SERVER control messages to this socket as + * matching services are registered. + * + * Return: 0 on success, negative errno on failure. + */ +int qmi_add_lookup(struct qmi_handle *qmi, unsigned int service, + unsigned int version, unsigned int instance) +{ + struct qmi_service *svc; + + svc = kzalloc(sizeof(*svc), GFP_KERNEL); + if (!svc) + return -ENOMEM; + + svc->service = service; + svc->version = version; + svc->instance = instance; + + list_add(&svc->list_node, &qmi->lookups); + + qmi_send_new_lookup(qmi, svc); + + return 0; +} +EXPORT_SYMBOL(qmi_add_lookup); + +static void qmi_send_new_server(struct qmi_handle *qmi, struct qmi_service *svc) +{ + struct qrtr_ctrl_pkt pkt; + struct sockaddr_qrtr sq; + struct msghdr msg = { }; + struct kvec iv = { &pkt, sizeof(pkt) }; + int ret; + + memset(&pkt, 0, sizeof(pkt)); + pkt.cmd = cpu_to_le32(QRTR_TYPE_NEW_SERVER); + pkt.server.service = cpu_to_le32(svc->service); + pkt.server.instance = cpu_to_le32(svc->version | svc->instance << 8); + pkt.server.node = cpu_to_le32(qmi->sq.sq_node); + pkt.server.port = cpu_to_le32(qmi->sq.sq_port); + + sq.sq_family = qmi->sq.sq_family; + sq.sq_node = qmi->sq.sq_node; + sq.sq_port = QRTR_PORT_CTRL; + + msg.msg_name = &sq; + msg.msg_namelen = sizeof(sq); + + mutex_lock(&qmi->sock_lock); + if (qmi->sock) { + ret = kernel_sendmsg(qmi->sock, &msg, &iv, 1, sizeof(pkt)); + if (ret < 0) + pr_err("send service registration failed: %d\n", ret); + } + mutex_unlock(&qmi->sock_lock); +} + +/** + * qmi_add_server() - register a service with the name service + * @qmi: qmi handle + * @service: type of the service + * @instance: instance of the service + * @version: version of the service + * + * Register a new service with the name service. This allows clients to find + * and start sending messages to the client associated with @qmi. + * + * Return: 0 on success, negative errno on failure. + */ +int qmi_add_server(struct qmi_handle *qmi, unsigned int service, + unsigned int version, unsigned int instance) +{ + struct qmi_service *svc; + + svc = kzalloc(sizeof(*svc), GFP_KERNEL); + if (!svc) + return -ENOMEM; + + svc->service = service; + svc->version = version; + svc->instance = instance; + + list_add(&svc->list_node, &qmi->services); + + qmi_send_new_server(qmi, svc); + + return 0; +} +EXPORT_SYMBOL(qmi_add_server); + +/** + * qmi_txn_init() - allocate transaction id within the given QMI handle + * @qmi: QMI handle + * @txn: transaction context + * @ei: description of how to decode a matching response (optional) + * @c_struct: pointer to the object to decode the response into (optional) + * + * This allocates a transaction id within the QMI handle. If @ei and @c_struct + * are specified any responses to this transaction will be decoded as described + * by @ei into @c_struct. + * + * A client calling qmi_txn_init() must call either qmi_txn_wait() or + * qmi_txn_cancel() to free up the allocated resources. + * + * Return: Transaction id on success, negative errno on failure. + */ +int qmi_txn_init(struct qmi_handle *qmi, struct qmi_txn *txn, + struct qmi_elem_info *ei, void *c_struct) +{ + int ret; + + memset(txn, 0, sizeof(*txn)); + + mutex_init(&txn->lock); + init_completion(&txn->completion); + txn->qmi = qmi; + txn->ei = ei; + txn->dest = c_struct; + + mutex_lock(&qmi->txn_lock); + ret = idr_alloc_cyclic(&qmi->txns, txn, 0, INT_MAX, GFP_KERNEL); + if (ret < 0) + pr_err("failed to allocate transaction id\n"); + + txn->id = ret; + mutex_unlock(&qmi->txn_lock); + + return ret; +} +EXPORT_SYMBOL(qmi_txn_init); + +/** + * qmi_txn_wait() - wait for a response on a transaction + * @txn: transaction handle + * @timeout: timeout, in jiffies + * + * If the transaction is decoded by the means of @ei and @c_struct the return + * value will be the returned value of qmi_decode_message(), otherwise it's up + * to the specified message handler to fill out the result. + * + * Return: the transaction response on success, negative errno on failure. + */ +int qmi_txn_wait(struct qmi_txn *txn, unsigned long timeout) +{ + struct qmi_handle *qmi = txn->qmi; + int ret; + + ret = wait_for_completion_interruptible_timeout(&txn->completion, + timeout); + + mutex_lock(&qmi->txn_lock); + mutex_lock(&txn->lock); + idr_remove(&qmi->txns, txn->id); + mutex_unlock(&txn->lock); + mutex_unlock(&qmi->txn_lock); + + if (ret < 0) + return ret; + else if (ret == 0) + return -ETIMEDOUT; + else + return txn->result; +} +EXPORT_SYMBOL(qmi_txn_wait); + +/** + * qmi_txn_cancel() - cancel an ongoing transaction + * @txn: transaction id + */ +void qmi_txn_cancel(struct qmi_txn *txn) +{ + struct qmi_handle *qmi = txn->qmi; + + mutex_lock(&qmi->txn_lock); + mutex_lock(&txn->lock); + idr_remove(&qmi->txns, txn->id); + mutex_unlock(&txn->lock); + mutex_unlock(&qmi->txn_lock); +} +EXPORT_SYMBOL(qmi_txn_cancel); + +/** + * qmi_invoke_handler() - find and invoke a handler for a message + * @qmi: qmi handle + * @sq: sockaddr of the sender + * @txn: transaction object for the message + * @buf: buffer containing the message + * @len: length of @buf + * + * Find handler and invoke handler for the incoming message. + */ +static void qmi_invoke_handler(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, const void *buf, size_t len) +{ + const struct qmi_msg_handler *handler; + const struct qmi_header *hdr = buf; + void *dest; + int ret; + + if (!qmi->handlers) + return; + + for (handler = qmi->handlers; handler->fn; handler++) { + if (handler->type == hdr->type && + handler->msg_id == hdr->msg_id) + break; + } + + if (!handler->fn) + return; + + dest = kzalloc(handler->decoded_size, GFP_KERNEL); + if (!dest) + return; + + ret = qmi_decode_message(buf, len, handler->ei, dest); + if (ret < 0) + pr_err("failed to decode incoming message\n"); + else + handler->fn(qmi, sq, txn, dest); + + kfree(dest); +} + +/** + * qmi_handle_net_reset() - invoked to handle ENETRESET on a QMI handle + * @qmi: the QMI context + * + * As a result of registering a name service with the QRTR all open sockets are + * flagged with ENETRESET and this function will be called. The typical case is + * the initial boot, where this signals that the local node id has been + * configured and as such any bound sockets needs to be rebound. So close the + * socket, inform the client and re-initialize the socket. + * + * For clients it's generally sufficient to react to the del_server callbacks, + * but server code is expected to treat the net_reset callback as a "bye" from + * all nodes. + * + * Finally the QMI handle will send out registration requests for any lookups + * and services. + */ +static void qmi_handle_net_reset(struct qmi_handle *qmi) +{ + struct sockaddr_qrtr sq; + struct qmi_service *svc; + struct socket *sock; + + sock = qmi_sock_create(qmi, &sq); + if (IS_ERR(sock)) + return; + + mutex_lock(&qmi->sock_lock); + sock_release(qmi->sock); + qmi->sock = NULL; + mutex_unlock(&qmi->sock_lock); + + qmi_recv_del_server(qmi, -1, -1); + + if (qmi->ops.net_reset) + qmi->ops.net_reset(qmi); + + mutex_lock(&qmi->sock_lock); + qmi->sock = sock; + qmi->sq = sq; + mutex_unlock(&qmi->sock_lock); + + list_for_each_entry(svc, &qmi->lookups, list_node) + qmi_send_new_lookup(qmi, svc); + + list_for_each_entry(svc, &qmi->services, list_node) + qmi_send_new_server(qmi, svc); +} + +static void qmi_handle_message(struct qmi_handle *qmi, + struct sockaddr_qrtr *sq, + const void *buf, size_t len) +{ + const struct qmi_header *hdr; + struct qmi_txn tmp_txn; + struct qmi_txn *txn = NULL; + int ret; + + if (len < sizeof(*hdr)) { + pr_err("ignoring short QMI packet\n"); + return; + } + + hdr = buf; + + /* If this is a response, find the matching transaction handle */ + if (hdr->type == QMI_RESPONSE) { + mutex_lock(&qmi->txn_lock); + txn = idr_find(&qmi->txns, hdr->txn_id); + + /* Ignore unexpected responses */ + if (!txn) { + mutex_unlock(&qmi->txn_lock); + return; + } + + mutex_lock(&txn->lock); + mutex_unlock(&qmi->txn_lock); + + if (txn->dest && txn->ei) { + ret = qmi_decode_message(buf, len, txn->ei, txn->dest); + if (ret < 0) + pr_err("failed to decode incoming message\n"); + + txn->result = ret; + complete(&txn->completion); + } else { + qmi_invoke_handler(qmi, sq, txn, buf, len); + } + + mutex_unlock(&txn->lock); + } else { + /* Create a txn based on the txn_id of the incoming message */ + memset(&tmp_txn, 0, sizeof(tmp_txn)); + tmp_txn.id = hdr->txn_id; + + qmi_invoke_handler(qmi, sq, &tmp_txn, buf, len); + } +} + +static void qmi_data_ready_work(struct work_struct *work) +{ + struct qmi_handle *qmi = container_of(work, struct qmi_handle, work); + struct qmi_ops *ops = &qmi->ops; + struct sockaddr_qrtr sq; + struct msghdr msg = { .msg_name = &sq, .msg_namelen = sizeof(sq) }; + struct kvec iv; + ssize_t msglen; + + for (;;) { + iv.iov_base = qmi->recv_buf; + iv.iov_len = qmi->recv_buf_size; + + mutex_lock(&qmi->sock_lock); + if (qmi->sock) + msglen = kernel_recvmsg(qmi->sock, &msg, &iv, 1, + iv.iov_len, MSG_DONTWAIT); + else + msglen = -EPIPE; + mutex_unlock(&qmi->sock_lock); + if (msglen == -EAGAIN) + break; + + if (msglen == -ENETRESET) { + qmi_handle_net_reset(qmi); + + /* The old qmi->sock is gone, our work is done */ + break; + } + + if (msglen < 0) { + pr_err("qmi recvmsg failed: %zd\n", msglen); + break; + } + + if (sq.sq_node == qmi->sq.sq_node && + sq.sq_port == QRTR_PORT_CTRL) { + qmi_recv_ctrl_pkt(qmi, qmi->recv_buf, msglen); + } else if (ops->msg_handler) { + ops->msg_handler(qmi, &sq, qmi->recv_buf, msglen); + } else { + qmi_handle_message(qmi, &sq, qmi->recv_buf, msglen); + } + } +} + +static void qmi_data_ready(struct sock *sk) +{ + struct qmi_handle *qmi = sk->sk_user_data; + + /* + * This will be NULL if we receive data while being in + * qmi_handle_release() + */ + if (!qmi) + return; + + queue_work(qmi->wq, &qmi->work); +} + +static struct socket *qmi_sock_create(struct qmi_handle *qmi, + struct sockaddr_qrtr *sq) +{ + struct socket *sock; + int sl = sizeof(*sq); + int ret; + + ret = sock_create_kern(&init_net, AF_QIPCRTR, SOCK_DGRAM, + PF_QIPCRTR, &sock); + if (ret < 0) + return ERR_PTR(ret); + + ret = kernel_getsockname(sock, (struct sockaddr *)sq, &sl); + if (ret < 0) { + sock_release(sock); + return ERR_PTR(ret); + } + + sock->sk->sk_user_data = qmi; + sock->sk->sk_data_ready = qmi_data_ready; + sock->sk->sk_error_report = qmi_data_ready; + + return sock; +} + +/** + * qmi_handle_init() - initialize a QMI client handle + * @qmi: QMI handle to initialize + * @recv_buf_size: maximum size of incoming message + * @ops: reference to callbacks for QRTR notifications + * @handlers: NULL-terminated list of QMI message handlers + * + * This initializes the QMI client handle to allow sending and receiving QMI + * messages. As messages are received the appropriate handler will be invoked. + * + * Return: 0 on success, negative errno on failure. + */ +int qmi_handle_init(struct qmi_handle *qmi, size_t recv_buf_size, + const struct qmi_ops *ops, + const struct qmi_msg_handler *handlers) +{ + int ret; + + mutex_init(&qmi->txn_lock); + mutex_init(&qmi->sock_lock); + + idr_init(&qmi->txns); + + INIT_LIST_HEAD(&qmi->lookups); + INIT_LIST_HEAD(&qmi->lookup_results); + INIT_LIST_HEAD(&qmi->services); + + INIT_WORK(&qmi->work, qmi_data_ready_work); + + qmi->handlers = handlers; + if (ops) + qmi->ops = *ops; + + if (recv_buf_size < sizeof(struct qrtr_ctrl_pkt)) + recv_buf_size = sizeof(struct qrtr_ctrl_pkt); + else + recv_buf_size += sizeof(struct qmi_header); + + qmi->recv_buf_size = recv_buf_size; + qmi->recv_buf = kzalloc(recv_buf_size, GFP_KERNEL); + if (!qmi->recv_buf) + return -ENOMEM; + + qmi->wq = alloc_workqueue("qmi_msg_handler", WQ_UNBOUND, 1); + if (!qmi->wq) { + ret = -ENOMEM; + goto err_free_recv_buf; + } + + qmi->sock = qmi_sock_create(qmi, &qmi->sq); + if (IS_ERR(qmi->sock)) { + pr_err("failed to create QMI socket\n"); + ret = PTR_ERR(qmi->sock); + goto err_destroy_wq; + } + + return 0; + +err_destroy_wq: + destroy_workqueue(qmi->wq); +err_free_recv_buf: + kfree(qmi->recv_buf); + + return ret; +} +EXPORT_SYMBOL(qmi_handle_init); + +/** + * qmi_handle_release() - release the QMI client handle + * @qmi: QMI client handle + * + * This closes the underlying socket and stops any handling of QMI messages. + */ +void qmi_handle_release(struct qmi_handle *qmi) +{ + struct socket *sock = qmi->sock; + struct qmi_service *svc, *tmp; + + sock->sk->sk_user_data = NULL; + cancel_work_sync(&qmi->work); + + qmi_recv_del_server(qmi, -1, -1); + + mutex_lock(&qmi->sock_lock); + sock_release(sock); + qmi->sock = NULL; + mutex_unlock(&qmi->sock_lock); + + destroy_workqueue(qmi->wq); + + idr_destroy(&qmi->txns); + + kfree(qmi->recv_buf); + + /* Free registered lookup requests */ + list_for_each_entry_safe(svc, tmp, &qmi->lookups, list_node) { + list_del(&svc->list_node); + kfree(svc); + } + + /* Free registered service information */ + list_for_each_entry_safe(svc, tmp, &qmi->services, list_node) { + list_del(&svc->list_node); + kfree(svc); + } +} +EXPORT_SYMBOL(qmi_handle_release); + +/** + * qmi_send_message() - send a QMI message + * @qmi: QMI client handle + * @sq: destination sockaddr + * @txn: transaction object to use for the message + * @type: type of message to send + * @msg_id: message id + * @len: max length of the QMI message + * @ei: QMI message description + * @c_struct: object to be encoded + * + * This function encodes @c_struct using @ei into a message of type @type, + * with @msg_id and @txn into a buffer of maximum size @len, and sends this to + * @sq. + * + * Return: 0 on success, negative errno on failure. + */ +static ssize_t qmi_send_message(struct qmi_handle *qmi, + struct sockaddr_qrtr *sq, struct qmi_txn *txn, + int type, int msg_id, size_t len, + struct qmi_elem_info *ei, const void *c_struct) +{ + struct msghdr msghdr = {}; + struct kvec iv; + void *msg; + int ret; + + msg = qmi_encode_message(type, + msg_id, &len, + txn->id, ei, + c_struct); + if (IS_ERR(msg)) + return PTR_ERR(msg); + + iv.iov_base = msg; + iv.iov_len = len; + + if (sq) { + msghdr.msg_name = sq; + msghdr.msg_namelen = sizeof(*sq); + } + + mutex_lock(&qmi->sock_lock); + if (qmi->sock) { + ret = kernel_sendmsg(qmi->sock, &msghdr, &iv, 1, len); + if (ret < 0) + pr_err("failed to send QMI message\n"); + } else { + ret = -EPIPE; + } + mutex_unlock(&qmi->sock_lock); + + kfree(msg); + + return ret < 0 ? ret : 0; +} + +/** + * qmi_send_request() - send a request QMI message + * @qmi: QMI client handle + * @sq: destination sockaddr + * @txn: transaction object to use for the message + * @msg_id: message id + * @len: max length of the QMI message + * @ei: QMI message description + * @c_struct: object to be encoded + * + * Return: 0 on success, negative errno on failure. + */ +ssize_t qmi_send_request(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, int msg_id, size_t len, + struct qmi_elem_info *ei, const void *c_struct) +{ + return qmi_send_message(qmi, sq, txn, QMI_REQUEST, msg_id, len, ei, + c_struct); +} +EXPORT_SYMBOL(qmi_send_request); + +/** + * qmi_send_response() - send a response QMI message + * @qmi: QMI client handle + * @sq: destination sockaddr + * @txn: transaction object to use for the message + * @msg_id: message id + * @len: max length of the QMI message + * @ei: QMI message description + * @c_struct: object to be encoded + * + * Return: 0 on success, negative errno on failure. + */ +ssize_t qmi_send_response(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, int msg_id, size_t len, + struct qmi_elem_info *ei, const void *c_struct) +{ + return qmi_send_message(qmi, sq, txn, QMI_RESPONSE, msg_id, len, ei, + c_struct); +} +EXPORT_SYMBOL(qmi_send_response); + +/** + * qmi_send_indication() - send an indication QMI message + * @qmi: QMI client handle + * @sq: destination sockaddr + * @msg_id: message id + * @len: max length of the QMI message + * @ei: QMI message description + * @c_struct: object to be encoded + * + * Return: 0 on success, negative errno on failure. + */ +ssize_t qmi_send_indication(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + int msg_id, size_t len, struct qmi_elem_info *ei, + const void *c_struct) +{ + struct qmi_txn txn; + ssize_t rval; + int ret; + + ret = qmi_txn_init(qmi, &txn, NULL, NULL); + if (ret < 0) + return ret; + + rval = qmi_send_message(qmi, sq, &txn, QMI_INDICATION, msg_id, len, ei, + c_struct); + + /* We don't care about future messages on this txn */ + qmi_txn_cancel(&txn); + + return rval; +} +EXPORT_SYMBOL(qmi_send_indication); diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c index ce35ff748adf..0a43b2e8906f 100644 --- a/drivers/soc/qcom/rmtfs_mem.c +++ b/drivers/soc/qcom/rmtfs_mem.c @@ -267,3 +267,7 @@ static void qcom_rmtfs_mem_exit(void) unregister_chrdev_region(qcom_rmtfs_mem_major, QCOM_RMTFS_MEM_DEV_MAX); } module_exit(qcom_rmtfs_mem_exit); + +MODULE_AUTHOR("Linaro Ltd"); +MODULE_DESCRIPTION("Qualcomm Remote Filesystem memory driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c index f51fb2ea7200..c22503cd1edf 100644 --- a/drivers/soc/qcom/smp2p.c +++ b/drivers/soc/qcom/smp2p.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -126,6 +127,8 @@ struct smp2p_entry { * @ipc_regmap: regmap for the outbound ipc * @ipc_offset: offset within the regmap * @ipc_bit: bit in regmap@offset to kick to signal remote processor + * @mbox_client: mailbox client handle + * @mbox_chan: apcs ipc mailbox channel handle * @inbound: list of inbound entries * @outbound: list of outbound entries */ @@ -146,6 +149,9 @@ struct qcom_smp2p { int ipc_offset; int ipc_bit; + struct mbox_client mbox_client; + struct mbox_chan *mbox_chan; + struct list_head inbound; struct list_head outbound; }; @@ -154,7 +160,13 @@ static void qcom_smp2p_kick(struct qcom_smp2p *smp2p) { /* Make sure any updated data is written before the kick */ wmb(); - regmap_write(smp2p->ipc_regmap, smp2p->ipc_offset, BIT(smp2p->ipc_bit)); + + if (smp2p->mbox_chan) { + mbox_send_message(smp2p->mbox_chan, NULL); + mbox_client_txdone(smp2p->mbox_chan, 0); + } else { + regmap_write(smp2p->ipc_regmap, smp2p->ipc_offset, BIT(smp2p->ipc_bit)); + } } /** @@ -453,10 +465,6 @@ static int qcom_smp2p_probe(struct platform_device *pdev) platform_set_drvdata(pdev, smp2p); - ret = smp2p_parse_ipc(smp2p); - if (ret) - return ret; - key = "qcom,smem"; ret = of_property_read_u32_array(pdev->dev.of_node, key, smp2p->smem_items, 2); @@ -465,17 +473,13 @@ static int qcom_smp2p_probe(struct platform_device *pdev) key = "qcom,local-pid"; ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->local_pid); - if (ret < 0) { - dev_err(&pdev->dev, "failed to read %s\n", key); - return -EINVAL; - } + if (ret) + goto report_read_failure; key = "qcom,remote-pid"; ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->remote_pid); - if (ret < 0) { - dev_err(&pdev->dev, "failed to read %s\n", key); - return -EINVAL; - } + if (ret) + goto report_read_failure; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -483,9 +487,23 @@ static int qcom_smp2p_probe(struct platform_device *pdev) return irq; } + smp2p->mbox_client.dev = &pdev->dev; + smp2p->mbox_client.knows_txdone = true; + smp2p->mbox_chan = mbox_request_channel(&smp2p->mbox_client, 0); + if (IS_ERR(smp2p->mbox_chan)) { + if (PTR_ERR(smp2p->mbox_chan) != -ENODEV) + return PTR_ERR(smp2p->mbox_chan); + + smp2p->mbox_chan = NULL; + + ret = smp2p_parse_ipc(smp2p); + if (ret) + return ret; + } + ret = qcom_smp2p_alloc_outbound_item(smp2p); if (ret < 0) - return ret; + goto release_mbox; for_each_available_child_of_node(pdev->dev.of_node, node) { entry = devm_kzalloc(&pdev->dev, sizeof(*entry), GFP_KERNEL); @@ -540,7 +558,14 @@ unwind_interfaces: smp2p->out->valid_entries = 0; +release_mbox: + mbox_free_channel(smp2p->mbox_chan); + return ret; + +report_read_failure: + dev_err(&pdev->dev, "failed to read %s\n", key); + return -EINVAL; } static int qcom_smp2p_remove(struct platform_device *pdev) @@ -554,6 +579,8 @@ static int qcom_smp2p_remove(struct platform_device *pdev) list_for_each_entry(entry, &smp2p->outbound, node) qcom_smem_state_unregister(entry->state); + mbox_free_channel(smp2p->mbox_chan); + smp2p->out->valid_entries = 0; return 0; diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c index 403bea9d546b..50214b620865 100644 --- a/drivers/soc/qcom/smsm.c +++ b/drivers/soc/qcom/smsm.c @@ -496,8 +496,10 @@ static int qcom_smsm_probe(struct platform_device *pdev) if (!smsm->hosts) return -ENOMEM; - local_node = of_find_node_with_property(of_node_get(pdev->dev.of_node), - "#qcom,smem-state-cells"); + for_each_child_of_node(pdev->dev.of_node, local_node) { + if (of_find_property(local_node, "#qcom,smem-state-cells", NULL)) + break; + } if (!local_node) { dev_err(&pdev->dev, "no state entry\n"); return -EINVAL; diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index 8b25bd55e648..2186285fda92 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # SAMSUNG SoC drivers # diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index 4d7694a4e7a4..29f294baac6e 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c index 938f8ccfcb74..f56adbd9fb8b 100644 --- a/drivers/soc/samsung/exynos-pmu.c +++ b/drivers/soc/samsung/exynos-pmu.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS - CPU PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// EXYNOS - CPU PMU(Power Management Unit) support #include #include diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h index 86b3f2f8966d..977e4daf5a0f 100644 --- a/drivers/soc/samsung/exynos-pmu.h +++ b/drivers/soc/samsung/exynos-pmu.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Header for EXYNOS PMU Driver support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __EXYNOS_PMU_H diff --git a/drivers/soc/samsung/exynos3250-pmu.c b/drivers/soc/samsung/exynos3250-pmu.c index af2f54e14b83..275d348ed9c9 100644 --- a/drivers/soc/samsung/exynos3250-pmu.c +++ b/drivers/soc/samsung/exynos3250-pmu.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS3250 - CPU PMU (Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// EXYNOS3250 - CPU PMU (Power Management Unit) support #include #include diff --git a/drivers/soc/samsung/exynos4-pmu.c b/drivers/soc/samsung/exynos4-pmu.c index 5dbfe4e31f4c..a7cdbf1aac0c 100644 --- a/drivers/soc/samsung/exynos4-pmu.c +++ b/drivers/soc/samsung/exynos4-pmu.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS4 - CPU PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// EXYNOS4 - CPU PMU(Power Management Unit) support #include #include diff --git a/drivers/soc/samsung/exynos5250-pmu.c b/drivers/soc/samsung/exynos5250-pmu.c index 8d94f0819f32..19b38e008145 100644 --- a/drivers/soc/samsung/exynos5250-pmu.c +++ b/drivers/soc/samsung/exynos5250-pmu.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS5250 - CPU PMU (Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// EXYNOS5250 - CPU PMU (Power Management Unit) support #include #include diff --git a/drivers/soc/samsung/exynos5420-pmu.c b/drivers/soc/samsung/exynos5420-pmu.c index 0a89fa79c678..b236d3b47b49 100644 --- a/drivers/soc/samsung/exynos5420-pmu.c +++ b/drivers/soc/samsung/exynos5420-pmu.c @@ -1,13 +1,9 @@ -/* - * Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS5420 - CPU PMU (Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd. +// http://www.samsung.com/ +// +// EXYNOS5420 - CPU PMU (Power Management Unit) support #include #include diff --git a/drivers/soc/samsung/pm_domains.c b/drivers/soc/samsung/pm_domains.c index 7c4fec1f93b5..b6a436594a19 100644 --- a/drivers/soc/samsung/pm_domains.c +++ b/drivers/soc/samsung/pm_domains.c @@ -1,17 +1,13 @@ -/* - * Exynos Generic power domain support. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Implementation of Exynos specific power domain control which is used in - * conjunction with runtime-pm. Support for both device-tree and non-device-tree - * based power domain support is included. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ +// SPDX-License-Identifier: GPL-2.0 +// +// Exynos Generic power domain support. +// +// Copyright (c) 2012 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// Implementation of Exynos specific power domain control which is used in +// conjunction with runtime-pm. Support for both device-tree and non-device-tree +// based power domain support is included. #include #include diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c index 39225de9d7f1..77d6b5c03aae 100644 --- a/drivers/soc/ti/knav_qmss_queue.c +++ b/drivers/soc/ti/knav_qmss_queue.c @@ -225,7 +225,7 @@ static struct knav_queue *__knav_queue_open(struct knav_queue_inst *inst, if (!knav_queue_is_busy(inst)) { struct knav_range_info *range = inst->range; - inst->name = kstrndup(name, KNAV_NAME_SIZE, GFP_KERNEL); + inst->name = kstrndup(name, KNAV_NAME_SIZE - 1, GFP_KERNEL); if (range->ops && range->ops->open_queue) ret = range->ops->open_queue(range, inst, flags); @@ -779,7 +779,7 @@ void *knav_pool_create(const char *name, goto err; } - pool->name = kstrndup(name, KNAV_NAME_SIZE, GFP_KERNEL); + pool->name = kstrndup(name, KNAV_NAME_SIZE - 1, GFP_KERNEL); pool->kdev = kdev; pool->dev = kdev->dev; diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig new file mode 100644 index 000000000000..687c8f3cd955 --- /dev/null +++ b/drivers/soc/xilinx/Kconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +menu "Xilinx SoC drivers" + +config XILINX_VCU + tristate "Xilinx VCU logicoreIP Init" + depends on HAS_IOMEM + help + Provides the driver to enable and disable the isolation between the + processing system and programmable logic part by using the logicoreIP + register set. This driver also configures the frequency based on the + clock information from the logicoreIP register set. + + If you say yes here you get support for the logicoreIP. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called xlnx_vcu. + +endmenu diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile new file mode 100644 index 000000000000..dee8fd51e303 --- /dev/null +++ b/drivers/soc/xilinx/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_XILINX_VCU) += xlnx_vcu.o diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c new file mode 100644 index 000000000000..a840c0272135 --- /dev/null +++ b/drivers/soc/xilinx/xlnx_vcu.c @@ -0,0 +1,630 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx VCU Init + * + * Copyright (C) 2016 - 2017 Xilinx, Inc. + * + * Contacts Dhaval Shah + */ +#include +#include +#include +#include +#include +#include +#include + +/* Address map for different registers implemented in the VCU LogiCORE IP. */ +#define VCU_ECODER_ENABLE 0x00 +#define VCU_DECODER_ENABLE 0x04 +#define VCU_MEMORY_DEPTH 0x08 +#define VCU_ENC_COLOR_DEPTH 0x0c +#define VCU_ENC_VERTICAL_RANGE 0x10 +#define VCU_ENC_FRAME_SIZE_X 0x14 +#define VCU_ENC_FRAME_SIZE_Y 0x18 +#define VCU_ENC_COLOR_FORMAT 0x1c +#define VCU_ENC_FPS 0x20 +#define VCU_MCU_CLK 0x24 +#define VCU_CORE_CLK 0x28 +#define VCU_PLL_BYPASS 0x2c +#define VCU_ENC_CLK 0x30 +#define VCU_PLL_CLK 0x34 +#define VCU_ENC_VIDEO_STANDARD 0x38 +#define VCU_STATUS 0x3c +#define VCU_AXI_ENC_CLK 0x40 +#define VCU_AXI_DEC_CLK 0x44 +#define VCU_AXI_MCU_CLK 0x48 +#define VCU_DEC_VIDEO_STANDARD 0x4c +#define VCU_DEC_FRAME_SIZE_X 0x50 +#define VCU_DEC_FRAME_SIZE_Y 0x54 +#define VCU_DEC_FPS 0x58 +#define VCU_BUFFER_B_FRAME 0x5c +#define VCU_WPP_EN 0x60 +#define VCU_PLL_CLK_DEC 0x64 +#define VCU_GASKET_INIT 0x74 +#define VCU_GASKET_VALUE 0x03 + +/* vcu slcr registers, bitmask and shift */ +#define VCU_PLL_CTRL 0x24 +#define VCU_PLL_CTRL_RESET_MASK 0x01 +#define VCU_PLL_CTRL_RESET_SHIFT 0 +#define VCU_PLL_CTRL_BYPASS_MASK 0x01 +#define VCU_PLL_CTRL_BYPASS_SHIFT 3 +#define VCU_PLL_CTRL_FBDIV_MASK 0x7f +#define VCU_PLL_CTRL_FBDIV_SHIFT 8 +#define VCU_PLL_CTRL_POR_IN_MASK 0x01 +#define VCU_PLL_CTRL_POR_IN_SHIFT 1 +#define VCU_PLL_CTRL_PWR_POR_MASK 0x01 +#define VCU_PLL_CTRL_PWR_POR_SHIFT 2 +#define VCU_PLL_CTRL_CLKOUTDIV_MASK 0x03 +#define VCU_PLL_CTRL_CLKOUTDIV_SHIFT 16 +#define VCU_PLL_CTRL_DEFAULT 0 +#define VCU_PLL_DIV2 2 + +#define VCU_PLL_CFG 0x28 +#define VCU_PLL_CFG_RES_MASK 0x0f +#define VCU_PLL_CFG_RES_SHIFT 0 +#define VCU_PLL_CFG_CP_MASK 0x0f +#define VCU_PLL_CFG_CP_SHIFT 5 +#define VCU_PLL_CFG_LFHF_MASK 0x03 +#define VCU_PLL_CFG_LFHF_SHIFT 10 +#define VCU_PLL_CFG_LOCK_CNT_MASK 0x03ff +#define VCU_PLL_CFG_LOCK_CNT_SHIFT 13 +#define VCU_PLL_CFG_LOCK_DLY_MASK 0x7f +#define VCU_PLL_CFG_LOCK_DLY_SHIFT 25 +#define VCU_ENC_CORE_CTRL 0x30 +#define VCU_ENC_MCU_CTRL 0x34 +#define VCU_DEC_CORE_CTRL 0x38 +#define VCU_DEC_MCU_CTRL 0x3c +#define VCU_PLL_DIVISOR_MASK 0x3f +#define VCU_PLL_DIVISOR_SHIFT 4 +#define VCU_SRCSEL_MASK 0x01 +#define VCU_SRCSEL_SHIFT 0 +#define VCU_SRCSEL_PLL 1 + +#define VCU_PLL_STATUS 0x60 +#define VCU_PLL_STATUS_LOCK_STATUS_MASK 0x01 + +#define MHZ 1000000 +#define FVCO_MIN (1500U * MHZ) +#define FVCO_MAX (3000U * MHZ) +#define DIVISOR_MIN 0 +#define DIVISOR_MAX 63 +#define FRAC 100 +#define LIMIT (10 * MHZ) + +/** + * struct xvcu_device - Xilinx VCU init device structure + * @dev: Platform device + * @pll_ref: pll ref clock source + * @aclk: axi clock source + * @logicore_reg_ba: logicore reg base address + * @vcu_slcr_ba: vcu_slcr Register base address + * @coreclk: core clock frequency + */ +struct xvcu_device { + struct device *dev; + struct clk *pll_ref; + struct clk *aclk; + void __iomem *logicore_reg_ba; + void __iomem *vcu_slcr_ba; + u32 coreclk; +}; + +/** + * struct xvcu_pll_cfg - Helper data + * @fbdiv: The integer portion of the feedback divider to the PLL + * @cp: PLL charge pump control + * @res: PLL loop filter resistor control + * @lfhf: PLL loop filter high frequency capacitor control + * @lock_dly: Lock circuit configuration settings for lock windowsize + * @lock_cnt: Lock circuit counter setting + */ +struct xvcu_pll_cfg { + u32 fbdiv; + u32 cp; + u32 res; + u32 lfhf; + u32 lock_dly; + u32 lock_cnt; +}; + +static const struct xvcu_pll_cfg xvcu_pll_cfg[] = { + { 25, 3, 10, 3, 63, 1000 }, + { 26, 3, 10, 3, 63, 1000 }, + { 27, 4, 6, 3, 63, 1000 }, + { 28, 4, 6, 3, 63, 1000 }, + { 29, 4, 6, 3, 63, 1000 }, + { 30, 4, 6, 3, 63, 1000 }, + { 31, 6, 1, 3, 63, 1000 }, + { 32, 6, 1, 3, 63, 1000 }, + { 33, 4, 10, 3, 63, 1000 }, + { 34, 5, 6, 3, 63, 1000 }, + { 35, 5, 6, 3, 63, 1000 }, + { 36, 5, 6, 3, 63, 1000 }, + { 37, 5, 6, 3, 63, 1000 }, + { 38, 5, 6, 3, 63, 975 }, + { 39, 3, 12, 3, 63, 950 }, + { 40, 3, 12, 3, 63, 925 }, + { 41, 3, 12, 3, 63, 900 }, + { 42, 3, 12, 3, 63, 875 }, + { 43, 3, 12, 3, 63, 850 }, + { 44, 3, 12, 3, 63, 850 }, + { 45, 3, 12, 3, 63, 825 }, + { 46, 3, 12, 3, 63, 800 }, + { 47, 3, 12, 3, 63, 775 }, + { 48, 3, 12, 3, 63, 775 }, + { 49, 3, 12, 3, 63, 750 }, + { 50, 3, 12, 3, 63, 750 }, + { 51, 3, 2, 3, 63, 725 }, + { 52, 3, 2, 3, 63, 700 }, + { 53, 3, 2, 3, 63, 700 }, + { 54, 3, 2, 3, 63, 675 }, + { 55, 3, 2, 3, 63, 675 }, + { 56, 3, 2, 3, 63, 650 }, + { 57, 3, 2, 3, 63, 650 }, + { 58, 3, 2, 3, 63, 625 }, + { 59, 3, 2, 3, 63, 625 }, + { 60, 3, 2, 3, 63, 625 }, + { 61, 3, 2, 3, 63, 600 }, + { 62, 3, 2, 3, 63, 600 }, + { 63, 3, 2, 3, 63, 600 }, + { 64, 3, 2, 3, 63, 600 }, + { 65, 3, 2, 3, 63, 600 }, + { 66, 3, 2, 3, 63, 600 }, + { 67, 3, 2, 3, 63, 600 }, + { 68, 3, 2, 3, 63, 600 }, + { 69, 3, 2, 3, 63, 600 }, + { 70, 3, 2, 3, 63, 600 }, + { 71, 3, 2, 3, 63, 600 }, + { 72, 3, 2, 3, 63, 600 }, + { 73, 3, 2, 3, 63, 600 }, + { 74, 3, 2, 3, 63, 600 }, + { 75, 3, 2, 3, 63, 600 }, + { 76, 3, 2, 3, 63, 600 }, + { 77, 3, 2, 3, 63, 600 }, + { 78, 3, 2, 3, 63, 600 }, + { 79, 3, 2, 3, 63, 600 }, + { 80, 3, 2, 3, 63, 600 }, + { 81, 3, 2, 3, 63, 600 }, + { 82, 3, 2, 3, 63, 600 }, + { 83, 4, 2, 3, 63, 600 }, + { 84, 4, 2, 3, 63, 600 }, + { 85, 4, 2, 3, 63, 600 }, + { 86, 4, 2, 3, 63, 600 }, + { 87, 4, 2, 3, 63, 600 }, + { 88, 4, 2, 3, 63, 600 }, + { 89, 4, 2, 3, 63, 600 }, + { 90, 4, 2, 3, 63, 600 }, + { 91, 4, 2, 3, 63, 600 }, + { 92, 4, 2, 3, 63, 600 }, + { 93, 4, 2, 3, 63, 600 }, + { 94, 4, 2, 3, 63, 600 }, + { 95, 4, 2, 3, 63, 600 }, + { 96, 4, 2, 3, 63, 600 }, + { 97, 4, 2, 3, 63, 600 }, + { 98, 4, 2, 3, 63, 600 }, + { 99, 4, 2, 3, 63, 600 }, + { 100, 4, 2, 3, 63, 600 }, + { 101, 4, 2, 3, 63, 600 }, + { 102, 4, 2, 3, 63, 600 }, + { 103, 5, 2, 3, 63, 600 }, + { 104, 5, 2, 3, 63, 600 }, + { 105, 5, 2, 3, 63, 600 }, + { 106, 5, 2, 3, 63, 600 }, + { 107, 3, 4, 3, 63, 600 }, + { 108, 3, 4, 3, 63, 600 }, + { 109, 3, 4, 3, 63, 600 }, + { 110, 3, 4, 3, 63, 600 }, + { 111, 3, 4, 3, 63, 600 }, + { 112, 3, 4, 3, 63, 600 }, + { 113, 3, 4, 3, 63, 600 }, + { 114, 3, 4, 3, 63, 600 }, + { 115, 3, 4, 3, 63, 600 }, + { 116, 3, 4, 3, 63, 600 }, + { 117, 3, 4, 3, 63, 600 }, + { 118, 3, 4, 3, 63, 600 }, + { 119, 3, 4, 3, 63, 600 }, + { 120, 3, 4, 3, 63, 600 }, + { 121, 3, 4, 3, 63, 600 }, + { 122, 3, 4, 3, 63, 600 }, + { 123, 3, 4, 3, 63, 600 }, + { 124, 3, 4, 3, 63, 600 }, + { 125, 3, 4, 3, 63, 600 }, +}; + +/** + * xvcu_read - Read from the VCU register space + * @iomem: vcu reg space base address + * @offset: vcu reg offset from base + * + * Return: Returns 32bit value from VCU register specified + * + */ +static inline u32 xvcu_read(void __iomem *iomem, u32 offset) +{ + return ioread32(iomem + offset); +} + +/** + * xvcu_write - Write to the VCU register space + * @iomem: vcu reg space base address + * @offset: vcu reg offset from base + * @value: Value to write + */ +static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value) +{ + iowrite32(value, iomem + offset); +} + +/** + * xvcu_write_field_reg - Write to the vcu reg field + * @iomem: vcu reg space base address + * @offset: vcu reg offset from base + * @field: vcu reg field to write to + * @mask: vcu reg mask + * @shift: vcu reg number of bits to shift the bitfield + */ +static void xvcu_write_field_reg(void __iomem *iomem, int offset, + u32 field, u32 mask, int shift) +{ + u32 val = xvcu_read(iomem, offset); + + val &= ~(mask << shift); + val |= (field & mask) << shift; + + xvcu_write(iomem, offset, val); +} + +/** + * xvcu_set_vcu_pll_info - Set the VCU PLL info + * @xvcu: Pointer to the xvcu_device structure + * + * Programming the VCU PLL based on the user configuration + * (ref clock freq, core clock freq, mcu clock freq). + * Core clock frequency has higher priority than mcu clock frequency + * Errors in following cases + * - When mcu or clock clock get from logicoreIP is 0 + * - When VCU PLL DIV related bits value other than 1 + * - When proper data not found for given data + * - When sis570_1 clocksource related operation failed + * + * Return: Returns status, either success or error+reason + */ +static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) +{ + u32 refclk, coreclk, mcuclk, inte, deci; + u32 divisor_mcu, divisor_core, fvco; + u32 clkoutdiv, vcu_pll_ctrl, pll_clk; + u32 cfg_val, mod, ctrl; + int ret, i; + const struct xvcu_pll_cfg *found = NULL; + + inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK); + deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC); + coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ; + mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ; + if (!mcuclk || !coreclk) { + dev_err(xvcu->dev, "Invalid mcu and core clock data\n"); + return -EINVAL; + } + + refclk = (inte * MHZ) + (deci * (MHZ / FRAC)); + dev_dbg(xvcu->dev, "Ref clock from logicoreIP is %uHz\n", refclk); + dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk); + dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk); + + clk_disable_unprepare(xvcu->pll_ref); + ret = clk_set_rate(xvcu->pll_ref, refclk); + if (ret) + dev_warn(xvcu->dev, "failed to set logicoreIP refclk rate\n"); + + ret = clk_prepare_enable(xvcu->pll_ref); + if (ret) { + dev_err(xvcu->dev, "failed to enable pll_ref clock source\n"); + return ret; + } + + refclk = clk_get_rate(xvcu->pll_ref); + + /* + * The divide-by-2 should be always enabled (==1) + * to meet the timing in the design. + * Otherwise, it's an error + */ + vcu_pll_ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_CTRL); + clkoutdiv = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT; + clkoutdiv = clkoutdiv & VCU_PLL_CTRL_CLKOUTDIV_MASK; + if (clkoutdiv != 1) { + dev_err(xvcu->dev, "clkoutdiv value is invalid\n"); + return -EINVAL; + } + + for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i >= 0; i--) { + const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i]; + + fvco = cfg->fbdiv * refclk; + if (fvco >= FVCO_MIN && fvco <= FVCO_MAX) { + pll_clk = fvco / VCU_PLL_DIV2; + if (fvco % VCU_PLL_DIV2 != 0) + pll_clk++; + mod = pll_clk % coreclk; + if (mod < LIMIT) { + divisor_core = pll_clk / coreclk; + } else if (coreclk - mod < LIMIT) { + divisor_core = pll_clk / coreclk; + divisor_core++; + } else { + continue; + } + if (divisor_core >= DIVISOR_MIN && + divisor_core <= DIVISOR_MAX) { + found = cfg; + divisor_mcu = pll_clk / mcuclk; + mod = pll_clk % mcuclk; + if (mcuclk - mod < LIMIT) + divisor_mcu++; + break; + } + } + } + + if (!found) { + dev_err(xvcu->dev, "Invalid clock combination.\n"); + return -EINVAL; + } + + xvcu->coreclk = pll_clk / divisor_core; + mcuclk = pll_clk / divisor_mcu; + dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk); + dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk); + dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk); + + vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT); + vcu_pll_ctrl |= (found->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) << + VCU_PLL_CTRL_FBDIV_SHIFT; + vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK << + VCU_PLL_CTRL_POR_IN_SHIFT); + vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_POR_IN_MASK) << + VCU_PLL_CTRL_POR_IN_SHIFT; + vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK << + VCU_PLL_CTRL_PWR_POR_SHIFT); + vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_PWR_POR_MASK) << + VCU_PLL_CTRL_PWR_POR_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, vcu_pll_ctrl); + + /* Set divisor for the core and mcu clock */ + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) << + VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL, ctrl); + + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) << + VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL, ctrl); + + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL, ctrl); + + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl); + + /* Set RES, CP, LFHF, LOCK_CNT and LOCK_DLY cfg values */ + cfg_val = (found->res << VCU_PLL_CFG_RES_SHIFT) | + (found->cp << VCU_PLL_CFG_CP_SHIFT) | + (found->lfhf << VCU_PLL_CFG_LFHF_SHIFT) | + (found->lock_cnt << VCU_PLL_CFG_LOCK_CNT_SHIFT) | + (found->lock_dly << VCU_PLL_CFG_LOCK_DLY_SHIFT); + xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CFG, cfg_val); + + return 0; +} + +/** + * xvcu_set_pll - PLL init sequence + * @xvcu: Pointer to the xvcu_device structure + * + * Call the api to set the PLL info and once that is done then + * init the PLL sequence to make the PLL stable. + * + * Return: Returns status, either success or error+reason + */ +static int xvcu_set_pll(struct xvcu_device *xvcu) +{ + u32 lock_status; + unsigned long timeout; + int ret; + + ret = xvcu_set_vcu_pll_info(xvcu); + if (ret) { + dev_err(xvcu->dev, "failed to set pll info\n"); + return ret; + } + + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 1, VCU_PLL_CTRL_BYPASS_MASK, + VCU_PLL_CTRL_BYPASS_SHIFT); + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 1, VCU_PLL_CTRL_RESET_MASK, + VCU_PLL_CTRL_RESET_SHIFT); + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 0, VCU_PLL_CTRL_RESET_MASK, + VCU_PLL_CTRL_RESET_SHIFT); + /* + * Defined the timeout for the max time to wait the + * PLL_STATUS to be locked. + */ + timeout = jiffies + msecs_to_jiffies(2000); + do { + lock_status = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_STATUS); + if (lock_status & VCU_PLL_STATUS_LOCK_STATUS_MASK) { + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 0, VCU_PLL_CTRL_BYPASS_MASK, + VCU_PLL_CTRL_BYPASS_SHIFT); + return 0; + } + } while (!time_after(jiffies, timeout)); + + /* PLL is not locked even after the timeout of the 2sec */ + dev_err(xvcu->dev, "PLL is not locked\n"); + return -ETIMEDOUT; +} + +/** + * xvcu_probe - Probe existence of the logicoreIP + * and initialize PLL + * + * @pdev: Pointer to the platform_device structure + * + * Return: Returns 0 on success + * Negative error code otherwise + */ +static int xvcu_probe(struct platform_device *pdev) +{ + struct resource *res; + struct xvcu_device *xvcu; + int ret; + + xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL); + if (!xvcu) + return -ENOMEM; + + xvcu->dev = &pdev->dev; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr"); + if (!res) { + dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n"); + return -ENODEV; + } + + xvcu->vcu_slcr_ba = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!xvcu->vcu_slcr_ba) { + dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n"); + return -ENOMEM; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "logicore"); + if (!res) { + dev_err(&pdev->dev, "get logicore memory resource failed.\n"); + return -ENODEV; + } + + xvcu->logicore_reg_ba = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!xvcu->logicore_reg_ba) { + dev_err(&pdev->dev, "logicore register mapping failed.\n"); + return -ENOMEM; + } + + xvcu->aclk = devm_clk_get(&pdev->dev, "aclk"); + if (IS_ERR(xvcu->aclk)) { + dev_err(&pdev->dev, "Could not get aclk clock\n"); + return PTR_ERR(xvcu->aclk); + } + + xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref"); + if (IS_ERR(xvcu->pll_ref)) { + dev_err(&pdev->dev, "Could not get pll_ref clock\n"); + return PTR_ERR(xvcu->pll_ref); + } + + ret = clk_prepare_enable(xvcu->aclk); + if (ret) { + dev_err(&pdev->dev, "aclk clock enable failed\n"); + return ret; + } + + ret = clk_prepare_enable(xvcu->pll_ref); + if (ret) { + dev_err(&pdev->dev, "pll_ref clock enable failed\n"); + goto error_aclk; + } + + /* + * Do the Gasket isolation and put the VCU out of reset + * Bit 0 : Gasket isolation + * Bit 1 : put VCU out of reset + */ + xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); + + /* Do the PLL Settings based on the ref clk,core and mcu clk freq */ + ret = xvcu_set_pll(xvcu); + if (ret) { + dev_err(&pdev->dev, "Failed to set the pll\n"); + goto error_pll_ref; + } + + dev_set_drvdata(&pdev->dev, xvcu); + + dev_info(&pdev->dev, "%s: Probed successfully\n", __func__); + + return 0; + +error_pll_ref: + clk_disable_unprepare(xvcu->pll_ref); +error_aclk: + clk_disable_unprepare(xvcu->aclk); + return ret; +} + +/** + * xvcu_remove - Insert gasket isolation + * and disable the clock + * @pdev: Pointer to the platform_device structure + * + * Return: Returns 0 on success + * Negative error code otherwise + */ +static int xvcu_remove(struct platform_device *pdev) +{ + struct xvcu_device *xvcu; + + xvcu = platform_get_drvdata(pdev); + if (!xvcu) + return -ENODEV; + + /* Add the the Gasket isolation and put the VCU in reset. */ + xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); + + clk_disable_unprepare(xvcu->pll_ref); + clk_disable_unprepare(xvcu->aclk); + + return 0; +} + +static const struct of_device_id xvcu_of_id_table[] = { + { .compatible = "xlnx,vcu" }, + { .compatible = "xlnx,vcu-logicoreip-1.0" }, + { } +}; +MODULE_DEVICE_TABLE(of, xvcu_of_id_table); + +static struct platform_driver xvcu_driver = { + .driver = { + .name = "xilinx-vcu", + .of_match_table = xvcu_of_id_table, + }, + .probe = xvcu_probe, + .remove = xvcu_remove, +}; + +module_platform_driver(xvcu_driver); + +MODULE_AUTHOR("Dhaval Shah "); +MODULE_DESCRIPTION("Xilinx VCU init Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile index d526fb88d9c5..48d262ae2f04 100644 --- a/drivers/tee/optee/Makefile +++ b/drivers/tee/optee/Makefile @@ -4,3 +4,4 @@ optee-objs += core.o optee-objs += call.o optee-objs += rpc.o optee-objs += supp.o +optee-objs += shm_pool.o diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c index f7b7b404c990..a5afbe6dee68 100644 --- a/drivers/tee/optee/call.c +++ b/drivers/tee/optee/call.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -135,6 +136,7 @@ u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg) struct optee *optee = tee_get_drvdata(ctx->teedev); struct optee_call_waiter w; struct optee_rpc_param param = { }; + struct optee_call_ctx call_ctx = { }; u32 ret; param.a0 = OPTEE_SMC_CALL_WITH_ARG; @@ -159,13 +161,14 @@ u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg) param.a1 = res.a1; param.a2 = res.a2; param.a3 = res.a3; - optee_handle_rpc(ctx, ¶m); + optee_handle_rpc(ctx, ¶m, &call_ctx); } else { ret = res.a0; break; } } + optee_rpc_finalize_call(&call_ctx); /* * We're done with our thread in secure world, if there's any * thread waiters wake up one. @@ -442,3 +445,218 @@ void optee_disable_shm_cache(struct optee *optee) } optee_cq_wait_final(&optee->call_queue, &w); } + +#define PAGELIST_ENTRIES_PER_PAGE \ + ((OPTEE_MSG_NONCONTIG_PAGE_SIZE / sizeof(u64)) - 1) + +/** + * optee_fill_pages_list() - write list of user pages to given shared + * buffer. + * + * @dst: page-aligned buffer where list of pages will be stored + * @pages: array of pages that represents shared buffer + * @num_pages: number of entries in @pages + * @page_offset: offset of user buffer from page start + * + * @dst should be big enough to hold list of user page addresses and + * links to the next pages of buffer + */ +void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages, + size_t page_offset) +{ + int n = 0; + phys_addr_t optee_page; + /* + * Refer to OPTEE_MSG_ATTR_NONCONTIG description in optee_msg.h + * for details. + */ + struct { + u64 pages_list[PAGELIST_ENTRIES_PER_PAGE]; + u64 next_page_data; + } *pages_data; + + /* + * Currently OP-TEE uses 4k page size and it does not looks + * like this will change in the future. On other hand, there are + * no know ARM architectures with page size < 4k. + * Thus the next built assert looks redundant. But the following + * code heavily relies on this assumption, so it is better be + * safe than sorry. + */ + BUILD_BUG_ON(PAGE_SIZE < OPTEE_MSG_NONCONTIG_PAGE_SIZE); + + pages_data = (void *)dst; + /* + * If linux page is bigger than 4k, and user buffer offset is + * larger than 4k/8k/12k/etc this will skip first 4k pages, + * because they bear no value data for OP-TEE. + */ + optee_page = page_to_phys(*pages) + + round_down(page_offset, OPTEE_MSG_NONCONTIG_PAGE_SIZE); + + while (true) { + pages_data->pages_list[n++] = optee_page; + + if (n == PAGELIST_ENTRIES_PER_PAGE) { + pages_data->next_page_data = + virt_to_phys(pages_data + 1); + pages_data++; + n = 0; + } + + optee_page += OPTEE_MSG_NONCONTIG_PAGE_SIZE; + if (!(optee_page & ~PAGE_MASK)) { + if (!--num_pages) + break; + pages++; + optee_page = page_to_phys(*pages); + } + } +} + +/* + * The final entry in each pagelist page is a pointer to the next + * pagelist page. + */ +static size_t get_pages_list_size(size_t num_entries) +{ + int pages = DIV_ROUND_UP(num_entries, PAGELIST_ENTRIES_PER_PAGE); + + return pages * OPTEE_MSG_NONCONTIG_PAGE_SIZE; +} + +u64 *optee_allocate_pages_list(size_t num_entries) +{ + return alloc_pages_exact(get_pages_list_size(num_entries), GFP_KERNEL); +} + +void optee_free_pages_list(void *list, size_t num_entries) +{ + free_pages_exact(list, get_pages_list_size(num_entries)); +} + +static bool is_normal_memory(pgprot_t p) +{ +#if defined(CONFIG_ARM) + return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; +#elif defined(CONFIG_ARM64) + return (pgprot_val(p) & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL); +#else +#error "Unuspported architecture" +#endif +} + +static int __check_mem_type(struct vm_area_struct *vma, unsigned long end) +{ + while (vma && is_normal_memory(vma->vm_page_prot)) { + if (vma->vm_end >= end) + return 0; + vma = vma->vm_next; + } + + return -EINVAL; +} + +static int check_mem_type(unsigned long start, size_t num_pages) +{ + struct mm_struct *mm = current->mm; + int rc; + + down_read(&mm->mmap_sem); + rc = __check_mem_type(find_vma(mm, start), + start + num_pages * PAGE_SIZE); + up_read(&mm->mmap_sem); + + return rc; +} + +int optee_shm_register(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t num_pages, + unsigned long start) +{ + struct tee_shm *shm_arg = NULL; + struct optee_msg_arg *msg_arg; + u64 *pages_list; + phys_addr_t msg_parg; + int rc; + + if (!num_pages) + return -EINVAL; + + rc = check_mem_type(start, num_pages); + if (rc) + return rc; + + pages_list = optee_allocate_pages_list(num_pages); + if (!pages_list) + return -ENOMEM; + + shm_arg = get_msg_arg(ctx, 1, &msg_arg, &msg_parg); + if (IS_ERR(shm_arg)) { + rc = PTR_ERR(shm_arg); + goto out; + } + + optee_fill_pages_list(pages_list, pages, num_pages, + tee_shm_get_page_offset(shm)); + + msg_arg->cmd = OPTEE_MSG_CMD_REGISTER_SHM; + msg_arg->params->attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT | + OPTEE_MSG_ATTR_NONCONTIG; + msg_arg->params->u.tmem.shm_ref = (unsigned long)shm; + msg_arg->params->u.tmem.size = tee_shm_get_size(shm); + /* + * In the least bits of msg_arg->params->u.tmem.buf_ptr we + * store buffer offset from 4k page, as described in OP-TEE ABI. + */ + msg_arg->params->u.tmem.buf_ptr = virt_to_phys(pages_list) | + (tee_shm_get_page_offset(shm) & (OPTEE_MSG_NONCONTIG_PAGE_SIZE - 1)); + + if (optee_do_call_with_arg(ctx, msg_parg) || + msg_arg->ret != TEEC_SUCCESS) + rc = -EINVAL; + + tee_shm_free(shm_arg); +out: + optee_free_pages_list(pages_list, num_pages); + return rc; +} + +int optee_shm_unregister(struct tee_context *ctx, struct tee_shm *shm) +{ + struct tee_shm *shm_arg; + struct optee_msg_arg *msg_arg; + phys_addr_t msg_parg; + int rc = 0; + + shm_arg = get_msg_arg(ctx, 1, &msg_arg, &msg_parg); + if (IS_ERR(shm_arg)) + return PTR_ERR(shm_arg); + + msg_arg->cmd = OPTEE_MSG_CMD_UNREGISTER_SHM; + + msg_arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_RMEM_INPUT; + msg_arg->params[0].u.rmem.shm_ref = (unsigned long)shm; + + if (optee_do_call_with_arg(ctx, msg_parg) || + msg_arg->ret != TEEC_SUCCESS) + rc = -EINVAL; + tee_shm_free(shm_arg); + return rc; +} + +int optee_shm_register_supp(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t num_pages, + unsigned long start) +{ + /* + * We don't want to register supplicant memory in OP-TEE. + * Instead information about it will be passed in RPC code. + */ + return check_mem_type(start, num_pages); +} + +int optee_shm_unregister_supp(struct tee_context *ctx, struct tee_shm *shm) +{ + return 0; +} diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index edb6e4e9ef3a..e9843c53fe31 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -28,6 +28,7 @@ #include #include "optee_private.h" #include "optee_smc.h" +#include "shm_pool.h" #define DRIVER_NAME "optee" @@ -97,6 +98,25 @@ int optee_from_msg_param(struct tee_param *params, size_t num_params, return rc; } break; + case OPTEE_MSG_ATTR_TYPE_RMEM_INPUT: + case OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT: + case OPTEE_MSG_ATTR_TYPE_RMEM_INOUT: + p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT + + attr - OPTEE_MSG_ATTR_TYPE_RMEM_INPUT; + p->u.memref.size = mp->u.rmem.size; + shm = (struct tee_shm *)(unsigned long) + mp->u.rmem.shm_ref; + + if (!shm) { + p->u.memref.shm_offs = 0; + p->u.memref.shm = NULL; + break; + } + p->u.memref.shm_offs = mp->u.rmem.offs; + p->u.memref.shm = shm; + + break; + default: return -EINVAL; } @@ -104,6 +124,46 @@ int optee_from_msg_param(struct tee_param *params, size_t num_params, return 0; } +static int to_msg_param_tmp_mem(struct optee_msg_param *mp, + const struct tee_param *p) +{ + int rc; + phys_addr_t pa; + + mp->attr = OPTEE_MSG_ATTR_TYPE_TMEM_INPUT + p->attr - + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; + + mp->u.tmem.shm_ref = (unsigned long)p->u.memref.shm; + mp->u.tmem.size = p->u.memref.size; + + if (!p->u.memref.shm) { + mp->u.tmem.buf_ptr = 0; + return 0; + } + + rc = tee_shm_get_pa(p->u.memref.shm, p->u.memref.shm_offs, &pa); + if (rc) + return rc; + + mp->u.tmem.buf_ptr = pa; + mp->attr |= OPTEE_MSG_ATTR_CACHE_PREDEFINED << + OPTEE_MSG_ATTR_CACHE_SHIFT; + + return 0; +} + +static int to_msg_param_reg_mem(struct optee_msg_param *mp, + const struct tee_param *p) +{ + mp->attr = OPTEE_MSG_ATTR_TYPE_RMEM_INPUT + p->attr - + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; + + mp->u.rmem.shm_ref = (unsigned long)p->u.memref.shm; + mp->u.rmem.size = p->u.memref.size; + mp->u.rmem.offs = p->u.memref.shm_offs; + return 0; +} + /** * optee_to_msg_param() - convert from struct tee_params to OPTEE_MSG parameters * @msg_params: OPTEE_MSG parameters @@ -116,7 +176,6 @@ int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params, { int rc; size_t n; - phys_addr_t pa; for (n = 0; n < num_params; n++) { const struct tee_param *p = params + n; @@ -139,22 +198,12 @@ int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params, case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT: case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT: case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT: - mp->attr = OPTEE_MSG_ATTR_TYPE_TMEM_INPUT + - p->attr - - TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; - mp->u.tmem.shm_ref = (unsigned long)p->u.memref.shm; - mp->u.tmem.size = p->u.memref.size; - if (!p->u.memref.shm) { - mp->u.tmem.buf_ptr = 0; - break; - } - rc = tee_shm_get_pa(p->u.memref.shm, - p->u.memref.shm_offs, &pa); + if (tee_shm_is_registered(p->u.memref.shm)) + rc = to_msg_param_reg_mem(mp, p); + else + rc = to_msg_param_tmp_mem(mp, p); if (rc) return rc; - mp->u.tmem.buf_ptr = pa; - mp->attr |= OPTEE_MSG_ATTR_CACHE_PREDEFINED << - OPTEE_MSG_ATTR_CACHE_SHIFT; break; default: return -EINVAL; @@ -171,6 +220,10 @@ static void optee_get_version(struct tee_device *teedev, .impl_caps = TEE_OPTEE_CAP_TZ, .gen_caps = TEE_GEN_CAP_GP, }; + struct optee *optee = tee_get_drvdata(teedev); + + if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) + v.gen_caps |= TEE_GEN_CAP_REG_MEM; *vers = v; } @@ -187,12 +240,12 @@ static int optee_open(struct tee_context *ctx) if (teedev == optee->supp_teedev) { bool busy = true; - mutex_lock(&optee->supp.ctx_mutex); + mutex_lock(&optee->supp.mutex); if (!optee->supp.ctx) { busy = false; optee->supp.ctx = ctx; } - mutex_unlock(&optee->supp.ctx_mutex); + mutex_unlock(&optee->supp.mutex); if (busy) { kfree(ctxdata); return -EBUSY; @@ -252,11 +305,8 @@ static void optee_release(struct tee_context *ctx) ctx->data = NULL; - if (teedev == optee->supp_teedev) { - mutex_lock(&optee->supp.ctx_mutex); - optee->supp.ctx = NULL; - mutex_unlock(&optee->supp.ctx_mutex); - } + if (teedev == optee->supp_teedev) + optee_supp_release(&optee->supp); } static const struct tee_driver_ops optee_ops = { @@ -267,6 +317,8 @@ static const struct tee_driver_ops optee_ops = { .close_session = optee_close_session, .invoke_func = optee_invoke_func, .cancel_req = optee_cancel_req, + .shm_register = optee_shm_register, + .shm_unregister = optee_shm_unregister, }; static const struct tee_desc optee_desc = { @@ -281,6 +333,8 @@ static const struct tee_driver_ops optee_supp_ops = { .release = optee_release, .supp_recv = optee_supp_recv, .supp_send = optee_supp_send, + .shm_register = optee_shm_register_supp, + .shm_unregister = optee_shm_unregister_supp, }; static const struct tee_desc optee_supp_desc = { @@ -345,21 +399,22 @@ static bool optee_msg_exchange_capabilities(optee_invoke_fn *invoke_fn, } static struct tee_shm_pool * -optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm) +optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm, + u32 sec_caps) { union { struct arm_smccc_res smccc; struct optee_smc_get_shm_config_result result; } res; - struct tee_shm_pool *pool; unsigned long vaddr; phys_addr_t paddr; size_t size; phys_addr_t begin; phys_addr_t end; void *va; - struct tee_shm_pool_mem_info priv_info; - struct tee_shm_pool_mem_info dmabuf_info; + struct tee_shm_pool_mgr *priv_mgr; + struct tee_shm_pool_mgr *dmabuf_mgr; + void *rc; invoke_fn(OPTEE_SMC_GET_SHM_CONFIG, 0, 0, 0, 0, 0, 0, 0, &res.smccc); if (res.result.status != OPTEE_SMC_RETURN_OK) { @@ -389,22 +444,49 @@ optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm) } vaddr = (unsigned long)va; - priv_info.vaddr = vaddr; - priv_info.paddr = paddr; - priv_info.size = OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; - dmabuf_info.vaddr = vaddr + OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; - dmabuf_info.paddr = paddr + OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; - dmabuf_info.size = size - OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; + /* + * If OP-TEE can work with unregistered SHM, we will use own pool + * for private shm + */ + if (sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) { + rc = optee_shm_pool_alloc_pages(); + if (IS_ERR(rc)) + goto err_memunmap; + priv_mgr = rc; + } else { + const size_t sz = OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; - pool = tee_shm_pool_alloc_res_mem(&priv_info, &dmabuf_info); - if (IS_ERR(pool)) { - memunmap(va); - goto out; + rc = tee_shm_pool_mgr_alloc_res_mem(vaddr, paddr, sz, + 3 /* 8 bytes aligned */); + if (IS_ERR(rc)) + goto err_memunmap; + priv_mgr = rc; + + vaddr += sz; + paddr += sz; + size -= sz; } + rc = tee_shm_pool_mgr_alloc_res_mem(vaddr, paddr, size, PAGE_SHIFT); + if (IS_ERR(rc)) + goto err_free_priv_mgr; + dmabuf_mgr = rc; + + rc = tee_shm_pool_alloc(priv_mgr, dmabuf_mgr); + if (IS_ERR(rc)) + goto err_free_dmabuf_mgr; + *memremaped_shm = va; -out: - return pool; + + return rc; + +err_free_dmabuf_mgr: + tee_shm_pool_mgr_destroy(dmabuf_mgr); +err_free_priv_mgr: + tee_shm_pool_mgr_destroy(priv_mgr); +err_memunmap: + memunmap(va); + return rc; } /* Simple wrapper functions to be able to use a function pointer */ @@ -482,7 +564,7 @@ static struct optee *optee_probe(struct device_node *np) if (!(sec_caps & OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM)) return ERR_PTR(-EINVAL); - pool = optee_config_shm_memremap(invoke_fn, &memremaped_shm); + pool = optee_config_shm_memremap(invoke_fn, &memremaped_shm, sec_caps); if (IS_ERR(pool)) return (void *)pool; @@ -493,6 +575,7 @@ static struct optee *optee_probe(struct device_node *np) } optee->invoke_fn = invoke_fn; + optee->sec_caps = sec_caps; teedev = tee_device_alloc(&optee_desc, NULL, pool, optee); if (IS_ERR(teedev)) { diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index dd7a06ee0462..30504901be80 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -67,11 +67,32 @@ #define OPTEE_MSG_ATTR_META BIT(8) /* - * The temporary shared memory object is not physically contigous and this - * temp memref is followed by another fragment until the last temp memref - * that doesn't have this bit set. + * Pointer to a list of pages used to register user-defined SHM buffer. + * Used with OPTEE_MSG_ATTR_TYPE_TMEM_*. + * buf_ptr should point to the beginning of the buffer. Buffer will contain + * list of page addresses. OP-TEE core can reconstruct contiguous buffer from + * that page addresses list. Page addresses are stored as 64 bit values. + * Last entry on a page should point to the next page of buffer. + * Every entry in buffer should point to a 4k page beginning (12 least + * significant bits must be equal to zero). + * + * 12 least significant bints of optee_msg_param.u.tmem.buf_ptr should hold page + * offset of the user buffer. + * + * So, entries should be placed like members of this structure: + * + * struct page_data { + * uint64_t pages_array[OPTEE_MSG_NONCONTIG_PAGE_SIZE/sizeof(uint64_t) - 1]; + * uint64_t next_page_data; + * }; + * + * Structure is designed to exactly fit into the page size + * OPTEE_MSG_NONCONTIG_PAGE_SIZE which is a standard 4KB page. + * + * The size of 4KB is chosen because this is the smallest page size for ARM + * architectures. If REE uses larger pages, it should divide them to 4KB ones. */ -#define OPTEE_MSG_ATTR_FRAGMENT BIT(9) +#define OPTEE_MSG_ATTR_NONCONTIG BIT(9) /* * Memory attributes for caching passed with temp memrefs. The actual value @@ -94,6 +115,11 @@ #define OPTEE_MSG_LOGIN_APPLICATION_USER 0x00000005 #define OPTEE_MSG_LOGIN_APPLICATION_GROUP 0x00000006 +/* + * Page size used in non-contiguous buffer entries + */ +#define OPTEE_MSG_NONCONTIG_PAGE_SIZE 4096 + /** * struct optee_msg_param_tmem - temporary memory reference parameter * @buf_ptr: Address of the buffer @@ -145,8 +171,8 @@ struct optee_msg_param_value { * * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value, - * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates tmem and - * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates rmem. + * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and + * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates @rmem, * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used. */ struct optee_msg_param { diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index c374cd594314..35e79386c556 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -53,36 +53,24 @@ struct optee_wait_queue { * @ctx the context of current connected supplicant. * if !NULL the supplicant device is available for use, * else busy - * @ctx_mutex: held while accessing @ctx - * @func: supplicant function id to call - * @ret: call return value - * @num_params: number of elements in @param - * @param: parameters for @func - * @req_posted: if true, a request has been posted to the supplicant - * @supp_next_send: if true, next step is for supplicant to send response - * @thrd_mutex: held by the thread doing a request to supplicant - * @supp_mutex: held by supplicant while operating on this struct - * @data_to_supp: supplicant is waiting on this for next request - * @data_from_supp: requesting thread is waiting on this to get the result + * @mutex: held while accessing content of this struct + * @req_id: current request id if supplicant is doing synchronous + * communication, else -1 + * @reqs: queued request not yet retrieved by supplicant + * @idr: IDR holding all requests currently being processed + * by supplicant + * @reqs_c: completion used by supplicant when waiting for a + * request to be queued. */ struct optee_supp { + /* Serializes access to this struct */ + struct mutex mutex; struct tee_context *ctx; - /* Serializes access of ctx */ - struct mutex ctx_mutex; - u32 func; - u32 ret; - size_t num_params; - struct tee_param *param; - - bool req_posted; - bool supp_next_send; - /* Serializes access to this struct for requesting thread */ - struct mutex thrd_mutex; - /* Serializes access to this struct for supplicant threads */ - struct mutex supp_mutex; - struct completion data_to_supp; - struct completion data_from_supp; + int req_id; + struct list_head reqs; + struct idr idr; + struct completion reqs_c; }; /** @@ -96,6 +84,8 @@ struct optee_supp { * @supp: supplicant synchronization struct for RPC to supplicant * @pool: shared memory pool * @memremaped_shm virtual address of memory in shared memory pool + * @sec_caps: secure world capabilities defined by + * OPTEE_SMC_SEC_CAP_* in optee_smc.h */ struct optee { struct tee_device *supp_teedev; @@ -106,6 +96,7 @@ struct optee { struct optee_supp supp; struct tee_shm_pool *pool; void *memremaped_shm; + u32 sec_caps; }; struct optee_session { @@ -130,7 +121,16 @@ struct optee_rpc_param { u32 a7; }; -void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param); +/* Holds context that is preserved during one STD call */ +struct optee_call_ctx { + /* information about pages list used in last allocation */ + void *pages_list; + size_t num_entries; +}; + +void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param, + struct optee_call_ctx *call_ctx); +void optee_rpc_finalize_call(struct optee_call_ctx *call_ctx); void optee_wait_queue_init(struct optee_wait_queue *wq); void optee_wait_queue_exit(struct optee_wait_queue *wq); @@ -142,6 +142,7 @@ int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len); int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len); void optee_supp_init(struct optee_supp *supp); void optee_supp_uninit(struct optee_supp *supp); +void optee_supp_release(struct optee_supp *supp); int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params, struct tee_param *param); @@ -160,11 +161,26 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); void optee_enable_shm_cache(struct optee *optee); void optee_disable_shm_cache(struct optee *optee); +int optee_shm_register(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t num_pages, + unsigned long start); +int optee_shm_unregister(struct tee_context *ctx, struct tee_shm *shm); + +int optee_shm_register_supp(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t num_pages, + unsigned long start); +int optee_shm_unregister_supp(struct tee_context *ctx, struct tee_shm *shm); + int optee_from_msg_param(struct tee_param *params, size_t num_params, const struct optee_msg_param *msg_params); int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params, const struct tee_param *params); +u64 *optee_allocate_pages_list(size_t num_entries); +void optee_free_pages_list(void *array, size_t num_entries); +void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages, + size_t page_offset); + /* * Small helpers */ diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h index 069c8e1429de..7cd327243ada 100644 --- a/drivers/tee/optee/optee_smc.h +++ b/drivers/tee/optee/optee_smc.h @@ -222,6 +222,13 @@ struct optee_smc_get_shm_config_result { #define OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM BIT(0) /* Secure world can communicate via previously unregistered shared memory */ #define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM BIT(1) + +/* + * Secure world supports commands "register/unregister shared memory", + * secure world accepts command buffers located in any parts of non-secure RAM + */ +#define OPTEE_SMC_SEC_CAP_DYNAMIC_SHM BIT(2) + #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9 #define OPTEE_SMC_EXCHANGE_CAPABILITIES \ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES) diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index cef417f4f4d2..41aea12e2bcc 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -192,15 +192,16 @@ static struct tee_shm *cmd_alloc_suppl(struct tee_context *ctx, size_t sz) if (ret) return ERR_PTR(-ENOMEM); - mutex_lock(&optee->supp.ctx_mutex); + mutex_lock(&optee->supp.mutex); /* Increases count as secure world doesn't have a reference */ shm = tee_shm_get_from_id(optee->supp.ctx, param.u.value.c); - mutex_unlock(&optee->supp.ctx_mutex); + mutex_unlock(&optee->supp.mutex); return shm; } static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx, - struct optee_msg_arg *arg) + struct optee_msg_arg *arg, + struct optee_call_ctx *call_ctx) { phys_addr_t pa; struct tee_shm *shm; @@ -245,10 +246,49 @@ static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx, goto bad; } - arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT; - arg->params[0].u.tmem.buf_ptr = pa; - arg->params[0].u.tmem.size = sz; - arg->params[0].u.tmem.shm_ref = (unsigned long)shm; + sz = tee_shm_get_size(shm); + + if (tee_shm_is_registered(shm)) { + struct page **pages; + u64 *pages_list; + size_t page_num; + + pages = tee_shm_get_pages(shm, &page_num); + if (!pages || !page_num) { + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + goto bad; + } + + pages_list = optee_allocate_pages_list(page_num); + if (!pages_list) { + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + goto bad; + } + + call_ctx->pages_list = pages_list; + call_ctx->num_entries = page_num; + + arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT | + OPTEE_MSG_ATTR_NONCONTIG; + /* + * In the least bits of u.tmem.buf_ptr we store buffer offset + * from 4k page, as described in OP-TEE ABI. + */ + arg->params[0].u.tmem.buf_ptr = virt_to_phys(pages_list) | + (tee_shm_get_page_offset(shm) & + (OPTEE_MSG_NONCONTIG_PAGE_SIZE - 1)); + arg->params[0].u.tmem.size = tee_shm_get_size(shm); + arg->params[0].u.tmem.shm_ref = (unsigned long)shm; + + optee_fill_pages_list(pages_list, pages, page_num, + tee_shm_get_page_offset(shm)); + } else { + arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT; + arg->params[0].u.tmem.buf_ptr = pa; + arg->params[0].u.tmem.size = sz; + arg->params[0].u.tmem.shm_ref = (unsigned long)shm; + } + arg->ret = TEEC_SUCCESS; return; bad: @@ -307,8 +347,24 @@ static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx, arg->ret = TEEC_SUCCESS; } +static void free_pages_list(struct optee_call_ctx *call_ctx) +{ + if (call_ctx->pages_list) { + optee_free_pages_list(call_ctx->pages_list, + call_ctx->num_entries); + call_ctx->pages_list = NULL; + call_ctx->num_entries = 0; + } +} + +void optee_rpc_finalize_call(struct optee_call_ctx *call_ctx) +{ + free_pages_list(call_ctx); +} + static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, - struct tee_shm *shm) + struct tee_shm *shm, + struct optee_call_ctx *call_ctx) { struct optee_msg_arg *arg; @@ -329,7 +385,8 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, handle_rpc_func_cmd_wait(arg); break; case OPTEE_MSG_RPC_CMD_SHM_ALLOC: - handle_rpc_func_cmd_shm_alloc(ctx, arg); + free_pages_list(call_ctx); + handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx); break; case OPTEE_MSG_RPC_CMD_SHM_FREE: handle_rpc_func_cmd_shm_free(ctx, arg); @@ -343,10 +400,12 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, * optee_handle_rpc() - handle RPC from secure world * @ctx: context doing the RPC * @param: value of registers for the RPC + * @call_ctx: call context. Preserved during one OP-TEE invocation * * Result of RPC is written back into @param. */ -void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param) +void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param, + struct optee_call_ctx *call_ctx) { struct tee_device *teedev = ctx->teedev; struct optee *optee = tee_get_drvdata(teedev); @@ -381,7 +440,7 @@ void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param) break; case OPTEE_SMC_RPC_FUNC_CMD: shm = reg_pair_to_ptr(param->a1, param->a2); - handle_rpc_func_cmd(ctx, optee, shm); + handle_rpc_func_cmd(ctx, optee, shm, call_ctx); break; default: pr_warn("Unknown RPC func 0x%x\n", diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c new file mode 100644 index 000000000000..49397813fff1 --- /dev/null +++ b/drivers/tee/optee/shm_pool.c @@ -0,0 +1,75 @@ +/* + * Copyright (c) 2015, Linaro Limited + * Copyright (c) 2017, EPAM Systems + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include "optee_private.h" +#include "optee_smc.h" +#include "shm_pool.h" + +static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, + struct tee_shm *shm, size_t size) +{ + unsigned int order = get_order(size); + struct page *page; + + page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); + if (!page) + return -ENOMEM; + + shm->kaddr = page_address(page); + shm->paddr = page_to_phys(page); + shm->size = PAGE_SIZE << order; + + return 0; +} + +static void pool_op_free(struct tee_shm_pool_mgr *poolm, + struct tee_shm *shm) +{ + free_pages((unsigned long)shm->kaddr, get_order(shm->size)); + shm->kaddr = NULL; +} + +static void pool_op_destroy_poolmgr(struct tee_shm_pool_mgr *poolm) +{ + kfree(poolm); +} + +static const struct tee_shm_pool_mgr_ops pool_ops = { + .alloc = pool_op_alloc, + .free = pool_op_free, + .destroy_poolmgr = pool_op_destroy_poolmgr, +}; + +/** + * optee_shm_pool_alloc_pages() - create page-based allocator pool + * + * This pool is used when OP-TEE supports dymanic SHM. In this case + * command buffers and such are allocated from kernel's own memory. + */ +struct tee_shm_pool_mgr *optee_shm_pool_alloc_pages(void) +{ + struct tee_shm_pool_mgr *mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); + + if (!mgr) + return ERR_PTR(-ENOMEM); + + mgr->ops = &pool_ops; + + return mgr; +} diff --git a/drivers/tee/optee/shm_pool.h b/drivers/tee/optee/shm_pool.h new file mode 100644 index 000000000000..4e753c3bf7ec --- /dev/null +++ b/drivers/tee/optee/shm_pool.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2015, Linaro Limited + * Copyright (c) 2016, EPAM Systems + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef SHM_POOL_H +#define SHM_POOL_H + +#include + +struct tee_shm_pool_mgr *optee_shm_pool_alloc_pages(void); + +#endif diff --git a/drivers/tee/optee/supp.c b/drivers/tee/optee/supp.c index b4ea0678a436..df35fc01fd3e 100644 --- a/drivers/tee/optee/supp.c +++ b/drivers/tee/optee/supp.c @@ -16,21 +16,61 @@ #include #include "optee_private.h" +struct optee_supp_req { + struct list_head link; + + bool busy; + u32 func; + u32 ret; + size_t num_params; + struct tee_param *param; + + struct completion c; +}; + void optee_supp_init(struct optee_supp *supp) { memset(supp, 0, sizeof(*supp)); - mutex_init(&supp->ctx_mutex); - mutex_init(&supp->thrd_mutex); - mutex_init(&supp->supp_mutex); - init_completion(&supp->data_to_supp); - init_completion(&supp->data_from_supp); + mutex_init(&supp->mutex); + init_completion(&supp->reqs_c); + idr_init(&supp->idr); + INIT_LIST_HEAD(&supp->reqs); + supp->req_id = -1; } void optee_supp_uninit(struct optee_supp *supp) { - mutex_destroy(&supp->ctx_mutex); - mutex_destroy(&supp->thrd_mutex); - mutex_destroy(&supp->supp_mutex); + mutex_destroy(&supp->mutex); + idr_destroy(&supp->idr); +} + +void optee_supp_release(struct optee_supp *supp) +{ + int id; + struct optee_supp_req *req; + struct optee_supp_req *req_tmp; + + mutex_lock(&supp->mutex); + + /* Abort all request retrieved by supplicant */ + idr_for_each_entry(&supp->idr, req, id) { + req->busy = false; + idr_remove(&supp->idr, id); + req->ret = TEEC_ERROR_COMMUNICATION; + complete(&req->c); + } + + /* Abort all queued requests */ + list_for_each_entry_safe(req, req_tmp, &supp->reqs, link) { + list_del(&req->link); + req->ret = TEEC_ERROR_COMMUNICATION; + complete(&req->c); + } + + supp->ctx = NULL; + supp->req_id = -1; + + mutex_unlock(&supp->mutex); } /** @@ -44,53 +84,42 @@ void optee_supp_uninit(struct optee_supp *supp) */ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, struct tee_param *param) + { - bool interruptable; struct optee *optee = tee_get_drvdata(ctx->teedev); struct optee_supp *supp = &optee->supp; + struct optee_supp_req *req = kzalloc(sizeof(*req), GFP_KERNEL); + bool interruptable; u32 ret; - /* - * Other threads blocks here until we've copied our answer from - * supplicant. - */ - while (mutex_lock_interruptible(&supp->thrd_mutex)) { - /* See comment below on when the RPC can be interrupted. */ - mutex_lock(&supp->ctx_mutex); - interruptable = !supp->ctx; - mutex_unlock(&supp->ctx_mutex); - if (interruptable) - return TEEC_ERROR_COMMUNICATION; - } + if (!req) + return TEEC_ERROR_OUT_OF_MEMORY; - /* - * We have exclusive access now since the supplicant at this - * point is either doing a - * wait_for_completion_interruptible(&supp->data_to_supp) or is in - * userspace still about to do the ioctl() to enter - * optee_supp_recv() below. - */ + init_completion(&req->c); + req->func = func; + req->num_params = num_params; + req->param = param; - supp->func = func; - supp->num_params = num_params; - supp->param = param; - supp->req_posted = true; + /* Insert the request in the request list */ + mutex_lock(&supp->mutex); + list_add_tail(&req->link, &supp->reqs); + mutex_unlock(&supp->mutex); - /* Let supplicant get the data */ - complete(&supp->data_to_supp); + /* Tell an eventual waiter there's a new request */ + complete(&supp->reqs_c); /* * Wait for supplicant to process and return result, once we've - * returned from wait_for_completion(data_from_supp) we have + * returned from wait_for_completion(&req->c) successfully we have * exclusive access again. */ - while (wait_for_completion_interruptible(&supp->data_from_supp)) { - mutex_lock(&supp->ctx_mutex); + while (wait_for_completion_interruptible(&req->c)) { + mutex_lock(&supp->mutex); interruptable = !supp->ctx; if (interruptable) { /* * There's no supplicant available and since the - * supp->ctx_mutex currently is held none can + * supp->mutex currently is held none can * become available until the mutex released * again. * @@ -101,24 +130,91 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, * will serve all requests in a timely manner and * interrupting then wouldn't make sense. */ - supp->ret = TEEC_ERROR_COMMUNICATION; - init_completion(&supp->data_to_supp); + interruptable = !req->busy; + if (!req->busy) + list_del(&req->link); } - mutex_unlock(&supp->ctx_mutex); - if (interruptable) + mutex_unlock(&supp->mutex); + + if (interruptable) { + req->ret = TEEC_ERROR_COMMUNICATION; break; + } } - ret = supp->ret; - supp->param = NULL; - supp->req_posted = false; - - /* We're done, let someone else talk to the supplicant now. */ - mutex_unlock(&supp->thrd_mutex); + ret = req->ret; + kfree(req); return ret; } +static struct optee_supp_req *supp_pop_entry(struct optee_supp *supp, + int num_params, int *id) +{ + struct optee_supp_req *req; + + if (supp->req_id != -1) { + /* + * Supplicant should not mix synchronous and asnynchronous + * requests. + */ + return ERR_PTR(-EINVAL); + } + + if (list_empty(&supp->reqs)) + return NULL; + + req = list_first_entry(&supp->reqs, struct optee_supp_req, link); + + if (num_params < req->num_params) { + /* Not enough room for parameters */ + return ERR_PTR(-EINVAL); + } + + *id = idr_alloc(&supp->idr, req, 1, 0, GFP_KERNEL); + if (*id < 0) + return ERR_PTR(-ENOMEM); + + list_del(&req->link); + req->busy = true; + + return req; +} + +static int supp_check_recv_params(size_t num_params, struct tee_param *params, + size_t *num_meta) +{ + size_t n; + + if (!num_params) + return -EINVAL; + + /* + * If there's memrefs we need to decrease those as they where + * increased earlier and we'll even refuse to accept any below. + */ + for (n = 0; n < num_params; n++) + if (tee_param_is_memref(params + n) && params[n].u.memref.shm) + tee_shm_put(params[n].u.memref.shm); + + /* + * We only expect parameters as TEE_IOCTL_PARAM_ATTR_TYPE_NONE with + * or without the TEE_IOCTL_PARAM_ATTR_META bit set. + */ + for (n = 0; n < num_params; n++) + if (params[n].attr && + params[n].attr != TEE_IOCTL_PARAM_ATTR_META) + return -EINVAL; + + /* At most we'll need one meta parameter so no need to check for more */ + if (params->attr == TEE_IOCTL_PARAM_ATTR_META) + *num_meta = 1; + else + *num_meta = 0; + + return 0; +} + /** * optee_supp_recv() - receive request for supplicant * @ctx: context receiving the request @@ -135,65 +231,99 @@ int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params, struct tee_device *teedev = ctx->teedev; struct optee *optee = tee_get_drvdata(teedev); struct optee_supp *supp = &optee->supp; + struct optee_supp_req *req = NULL; + int id; + size_t num_meta; int rc; - /* - * In case two threads in one supplicant is calling this function - * simultaneously we need to protect the data with a mutex which - * we'll release before returning. - */ - mutex_lock(&supp->supp_mutex); + rc = supp_check_recv_params(*num_params, param, &num_meta); + if (rc) + return rc; - if (supp->supp_next_send) { - /* - * optee_supp_recv() has been called again without - * a optee_supp_send() in between. Supplicant has - * probably been restarted before it was able to - * write back last result. Abort last request and - * wait for a new. - */ - if (supp->req_posted) { - supp->ret = TEEC_ERROR_COMMUNICATION; - supp->supp_next_send = false; - complete(&supp->data_from_supp); + while (true) { + mutex_lock(&supp->mutex); + req = supp_pop_entry(supp, *num_params - num_meta, &id); + mutex_unlock(&supp->mutex); + + if (req) { + if (IS_ERR(req)) + return PTR_ERR(req); + break; } - } - /* - * This is where supplicant will be hanging most of the - * time, let's make this interruptable so we can easily - * restart supplicant if needed. - */ - if (wait_for_completion_interruptible(&supp->data_to_supp)) { - rc = -ERESTARTSYS; - goto out; - } - - /* We have exlusive access to the data */ - - if (*num_params < supp->num_params) { /* - * Not enough room for parameters, tell supplicant - * it failed and abort last request. + * If we didn't get a request we'll block in + * wait_for_completion() to avoid needless spinning. + * + * This is where supplicant will be hanging most of + * the time, let's make this interruptable so we + * can easily restart supplicant if needed. */ - supp->ret = TEEC_ERROR_COMMUNICATION; - rc = -EINVAL; - complete(&supp->data_from_supp); - goto out; + if (wait_for_completion_interruptible(&supp->reqs_c)) + return -ERESTARTSYS; } - *func = supp->func; - *num_params = supp->num_params; - memcpy(param, supp->param, - sizeof(struct tee_param) * supp->num_params); + if (num_meta) { + /* + * tee-supplicant support meta parameters -> requsts can be + * processed asynchronously. + */ + param->attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT | + TEE_IOCTL_PARAM_ATTR_META; + param->u.value.a = id; + param->u.value.b = 0; + param->u.value.c = 0; + } else { + mutex_lock(&supp->mutex); + supp->req_id = id; + mutex_unlock(&supp->mutex); + } - /* Allow optee_supp_send() below to do its work */ - supp->supp_next_send = true; + *func = req->func; + *num_params = req->num_params + num_meta; + memcpy(param + num_meta, req->param, + sizeof(struct tee_param) * req->num_params); - rc = 0; -out: - mutex_unlock(&supp->supp_mutex); - return rc; + return 0; +} + +static struct optee_supp_req *supp_pop_req(struct optee_supp *supp, + size_t num_params, + struct tee_param *param, + size_t *num_meta) +{ + struct optee_supp_req *req; + int id; + size_t nm; + const u32 attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT | + TEE_IOCTL_PARAM_ATTR_META; + + if (!num_params) + return ERR_PTR(-EINVAL); + + if (supp->req_id == -1) { + if (param->attr != attr) + return ERR_PTR(-EINVAL); + id = param->u.value.a; + nm = 1; + } else { + id = supp->req_id; + nm = 0; + } + + req = idr_find(&supp->idr, id); + if (!req) + return ERR_PTR(-ENOENT); + + if ((num_params - nm) != req->num_params) + return ERR_PTR(-EINVAL); + + req->busy = false; + idr_remove(&supp->idr, id); + supp->req_id = -1; + *num_meta = nm; + + return req; } /** @@ -211,63 +341,42 @@ int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params, struct tee_device *teedev = ctx->teedev; struct optee *optee = tee_get_drvdata(teedev); struct optee_supp *supp = &optee->supp; + struct optee_supp_req *req; size_t n; - int rc = 0; + size_t num_meta; - /* - * We still have exclusive access to the data since that's how we - * left it when returning from optee_supp_read(). - */ + mutex_lock(&supp->mutex); + req = supp_pop_req(supp, num_params, param, &num_meta); + mutex_unlock(&supp->mutex); - /* See comment on mutex in optee_supp_read() above */ - mutex_lock(&supp->supp_mutex); - - if (!supp->supp_next_send) { - /* - * Something strange is going on, supplicant shouldn't - * enter optee_supp_send() in this state - */ - rc = -ENOENT; - goto out; - } - - if (num_params != supp->num_params) { - /* - * Something is wrong, let supplicant restart. Next call to - * optee_supp_recv() will give an error to the requesting - * thread and release it. - */ - rc = -EINVAL; - goto out; + if (IS_ERR(req)) { + /* Something is wrong, let supplicant restart. */ + return PTR_ERR(req); } /* Update out and in/out parameters */ - for (n = 0; n < num_params; n++) { - struct tee_param *p = supp->param + n; + for (n = 0; n < req->num_params; n++) { + struct tee_param *p = req->param + n; - switch (p->attr) { + switch (p->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) { case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT: case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT: - p->u.value.a = param[n].u.value.a; - p->u.value.b = param[n].u.value.b; - p->u.value.c = param[n].u.value.c; + p->u.value.a = param[n + num_meta].u.value.a; + p->u.value.b = param[n + num_meta].u.value.b; + p->u.value.c = param[n + num_meta].u.value.c; break; case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT: case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT: - p->u.memref.size = param[n].u.memref.size; + p->u.memref.size = param[n + num_meta].u.memref.size; break; default: break; } } - supp->ret = ret; - - /* Allow optee_supp_recv() above to do its work */ - supp->supp_next_send = false; + req->ret = ret; /* Let the requesting thread continue */ - complete(&supp->data_from_supp); -out: - mutex_unlock(&supp->supp_mutex); - return rc; + complete(&req->c); + + return 0; } diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c index 58a5009eacc3..6c4b200a4560 100644 --- a/drivers/tee/tee_core.c +++ b/drivers/tee/tee_core.c @@ -54,6 +54,7 @@ static int tee_open(struct inode *inode, struct file *filp) goto err; } + kref_init(&ctx->refcount); ctx->teedev = teedev; INIT_LIST_HEAD(&ctx->list_shm); filp->private_data = ctx; @@ -68,19 +69,40 @@ err: return rc; } +void teedev_ctx_get(struct tee_context *ctx) +{ + if (ctx->releasing) + return; + + kref_get(&ctx->refcount); +} + +static void teedev_ctx_release(struct kref *ref) +{ + struct tee_context *ctx = container_of(ref, struct tee_context, + refcount); + ctx->releasing = true; + ctx->teedev->desc->ops->release(ctx); + kfree(ctx); +} + +void teedev_ctx_put(struct tee_context *ctx) +{ + if (ctx->releasing) + return; + + kref_put(&ctx->refcount, teedev_ctx_release); +} + +static void teedev_close_context(struct tee_context *ctx) +{ + tee_device_put(ctx->teedev); + teedev_ctx_put(ctx); +} + static int tee_release(struct inode *inode, struct file *filp) { - struct tee_context *ctx = filp->private_data; - struct tee_device *teedev = ctx->teedev; - struct tee_shm *shm; - - ctx->teedev->desc->ops->release(ctx); - mutex_lock(&ctx->teedev->mutex); - list_for_each_entry(shm, &ctx->list_shm, link) - shm->ctx = NULL; - mutex_unlock(&ctx->teedev->mutex); - kfree(ctx); - tee_device_put(teedev); + teedev_close_context(filp->private_data); return 0; } @@ -114,8 +136,6 @@ static int tee_ioctl_shm_alloc(struct tee_context *ctx, if (data.flags) return -EINVAL; - data.id = -1; - shm = tee_shm_alloc(ctx, data.size, TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); if (IS_ERR(shm)) return PTR_ERR(shm); @@ -138,6 +158,43 @@ static int tee_ioctl_shm_alloc(struct tee_context *ctx, return ret; } +static int +tee_ioctl_shm_register(struct tee_context *ctx, + struct tee_ioctl_shm_register_data __user *udata) +{ + long ret; + struct tee_ioctl_shm_register_data data; + struct tee_shm *shm; + + if (copy_from_user(&data, udata, sizeof(data))) + return -EFAULT; + + /* Currently no input flags are supported */ + if (data.flags) + return -EINVAL; + + shm = tee_shm_register(ctx, data.addr, data.length, + TEE_SHM_DMA_BUF | TEE_SHM_USER_MAPPED); + if (IS_ERR(shm)) + return PTR_ERR(shm); + + data.id = shm->id; + data.flags = shm->flags; + data.length = shm->size; + + if (copy_to_user(udata, &data, sizeof(data))) + ret = -EFAULT; + else + ret = tee_shm_get_fd(shm); + /* + * When user space closes the file descriptor the shared memory + * should be freed or if tee_shm_get_fd() failed then it will + * be freed immediately. + */ + tee_shm_put(shm); + return ret; +} + static int params_from_user(struct tee_context *ctx, struct tee_param *params, size_t num_params, struct tee_ioctl_param __user *uparams) @@ -152,11 +209,11 @@ static int params_from_user(struct tee_context *ctx, struct tee_param *params, return -EFAULT; /* All unused attribute bits has to be zero */ - if (ip.attr & ~TEE_IOCTL_PARAM_ATTR_TYPE_MASK) + if (ip.attr & ~TEE_IOCTL_PARAM_ATTR_MASK) return -EINVAL; params[n].attr = ip.attr; - switch (ip.attr) { + switch (ip.attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) { case TEE_IOCTL_PARAM_ATTR_TYPE_NONE: case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT: break; @@ -221,18 +278,6 @@ static int params_to_user(struct tee_ioctl_param __user *uparams, return 0; } -static bool param_is_memref(struct tee_param *param) -{ - switch (param->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) { - case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT: - case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT: - case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT: - return true; - default: - return false; - } -} - static int tee_ioctl_open_session(struct tee_context *ctx, struct tee_ioctl_buf_data __user *ubuf) { @@ -296,7 +341,7 @@ out: if (params) { /* Decrease ref count for all valid shared memory pointers */ for (n = 0; n < arg.num_params; n++) - if (param_is_memref(params + n) && + if (tee_param_is_memref(params + n) && params[n].u.memref.shm) tee_shm_put(params[n].u.memref.shm); kfree(params); @@ -358,7 +403,7 @@ out: if (params) { /* Decrease ref count for all valid shared memory pointers */ for (n = 0; n < arg.num_params; n++) - if (param_is_memref(params + n) && + if (tee_param_is_memref(params + n) && params[n].u.memref.shm) tee_shm_put(params[n].u.memref.shm); kfree(params); @@ -406,8 +451,8 @@ static int params_to_supp(struct tee_context *ctx, struct tee_ioctl_param ip; struct tee_param *p = params + n; - ip.attr = p->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK; - switch (p->attr) { + ip.attr = p->attr; + switch (p->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) { case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT: case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT: ip.a = p->u.value.a; @@ -471,6 +516,10 @@ static int tee_ioctl_supp_recv(struct tee_context *ctx, if (!params) return -ENOMEM; + rc = params_from_user(ctx, params, num_params, uarg->params); + if (rc) + goto out; + rc = ctx->teedev->desc->ops->supp_recv(ctx, &func, &num_params, params); if (rc) goto out; @@ -500,11 +549,11 @@ static int params_from_supp(struct tee_param *params, size_t num_params, return -EFAULT; /* All unused attribute bits has to be zero */ - if (ip.attr & ~TEE_IOCTL_PARAM_ATTR_TYPE_MASK) + if (ip.attr & ~TEE_IOCTL_PARAM_ATTR_MASK) return -EINVAL; p->attr = ip.attr; - switch (ip.attr) { + switch (ip.attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) { case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT: case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT: /* Only out and in/out values can be updated */ @@ -586,6 +635,8 @@ static long tee_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) return tee_ioctl_version(ctx, uarg); case TEE_IOC_SHM_ALLOC: return tee_ioctl_shm_alloc(ctx, uarg); + case TEE_IOC_SHM_REGISTER: + return tee_ioctl_shm_register(ctx, uarg); case TEE_IOC_OPEN_SESSION: return tee_ioctl_open_session(ctx, uarg); case TEE_IOC_INVOKE: diff --git a/drivers/tee/tee_private.h b/drivers/tee/tee_private.h index 21cb6be8bce9..85d99d621603 100644 --- a/drivers/tee/tee_private.h +++ b/drivers/tee/tee_private.h @@ -21,68 +21,15 @@ #include #include -struct tee_device; - -/** - * struct tee_shm - shared memory object - * @teedev: device used to allocate the object - * @ctx: context using the object, if NULL the context is gone - * @link link element - * @paddr: physical address of the shared memory - * @kaddr: virtual address of the shared memory - * @size: size of shared memory - * @dmabuf: dmabuf used to for exporting to user space - * @flags: defined by TEE_SHM_* in tee_drv.h - * @id: unique id of a shared memory object on this device - */ -struct tee_shm { - struct tee_device *teedev; - struct tee_context *ctx; - struct list_head link; - phys_addr_t paddr; - void *kaddr; - size_t size; - struct dma_buf *dmabuf; - u32 flags; - int id; -}; - -struct tee_shm_pool_mgr; - -/** - * struct tee_shm_pool_mgr_ops - shared memory pool manager operations - * @alloc: called when allocating shared memory - * @free: called when freeing shared memory - */ -struct tee_shm_pool_mgr_ops { - int (*alloc)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm, - size_t size); - void (*free)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm); -}; - -/** - * struct tee_shm_pool_mgr - shared memory manager - * @ops: operations - * @private_data: private data for the shared memory manager - */ -struct tee_shm_pool_mgr { - const struct tee_shm_pool_mgr_ops *ops; - void *private_data; -}; - /** * struct tee_shm_pool - shared memory pool * @private_mgr: pool manager for shared memory only between kernel * and secure world * @dma_buf_mgr: pool manager for shared memory exported to user space - * @destroy: called when destroying the pool - * @private_data: private data for the pool */ struct tee_shm_pool { - struct tee_shm_pool_mgr private_mgr; - struct tee_shm_pool_mgr dma_buf_mgr; - void (*destroy)(struct tee_shm_pool *pool); - void *private_data; + struct tee_shm_pool_mgr *private_mgr; + struct tee_shm_pool_mgr *dma_buf_mgr; }; #define TEE_DEVICE_FLAG_REGISTERED 0x1 @@ -126,4 +73,7 @@ int tee_shm_get_fd(struct tee_shm *shm); bool tee_device_get(struct tee_device *teedev); void tee_device_put(struct tee_device *teedev); +void teedev_ctx_get(struct tee_context *ctx); +void teedev_ctx_put(struct tee_context *ctx); + #endif /*TEE_PRIVATE_H*/ diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c index 4bc7956cefc4..556960a1bab3 100644 --- a/drivers/tee/tee_shm.c +++ b/drivers/tee/tee_shm.c @@ -23,7 +23,6 @@ static void tee_shm_release(struct tee_shm *shm) { struct tee_device *teedev = shm->teedev; - struct tee_shm_pool_mgr *poolm; mutex_lock(&teedev->mutex); idr_remove(&teedev->idr, shm->id); @@ -31,12 +30,32 @@ static void tee_shm_release(struct tee_shm *shm) list_del(&shm->link); mutex_unlock(&teedev->mutex); - if (shm->flags & TEE_SHM_DMA_BUF) - poolm = &teedev->pool->dma_buf_mgr; - else - poolm = &teedev->pool->private_mgr; + if (shm->flags & TEE_SHM_POOL) { + struct tee_shm_pool_mgr *poolm; + + if (shm->flags & TEE_SHM_DMA_BUF) + poolm = teedev->pool->dma_buf_mgr; + else + poolm = teedev->pool->private_mgr; + + poolm->ops->free(poolm, shm); + } else if (shm->flags & TEE_SHM_REGISTER) { + size_t n; + int rc = teedev->desc->ops->shm_unregister(shm->ctx, shm); + + if (rc) + dev_err(teedev->dev.parent, + "unregister shm %p failed: %d", shm, rc); + + for (n = 0; n < shm->num_pages; n++) + put_page(shm->pages[n]); + + kfree(shm->pages); + } + + if (shm->ctx) + teedev_ctx_put(shm->ctx); - poolm->ops->free(poolm, shm); kfree(shm); tee_device_put(teedev); @@ -76,6 +95,10 @@ static int tee_shm_op_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma) struct tee_shm *shm = dmabuf->priv; size_t size = vma->vm_end - vma->vm_start; + /* Refuse sharing shared memory provided by application */ + if (shm->flags & TEE_SHM_REGISTER) + return -EINVAL; + return remap_pfn_range(vma, vma->vm_start, shm->paddr >> PAGE_SHIFT, size, vma->vm_page_prot); } @@ -89,26 +112,20 @@ static const struct dma_buf_ops tee_shm_dma_buf_ops = { .mmap = tee_shm_op_mmap, }; -/** - * tee_shm_alloc() - Allocate shared memory - * @ctx: Context that allocates the shared memory - * @size: Requested size of shared memory - * @flags: Flags setting properties for the requested shared memory. - * - * Memory allocated as global shared memory is automatically freed when the - * TEE file pointer is closed. The @flags field uses the bits defined by - * TEE_SHM_* in . TEE_SHM_MAPPED must currently always be - * set. If TEE_SHM_DMA_BUF global shared memory will be allocated and - * associated with a dma-buf handle, else driver private memory. - */ -struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags) +static struct tee_shm *__tee_shm_alloc(struct tee_context *ctx, + struct tee_device *teedev, + size_t size, u32 flags) { - struct tee_device *teedev = ctx->teedev; struct tee_shm_pool_mgr *poolm = NULL; struct tee_shm *shm; void *ret; int rc; + if (ctx && ctx->teedev != teedev) { + dev_err(teedev->dev.parent, "ctx and teedev mismatch\n"); + return ERR_PTR(-EINVAL); + } + if (!(flags & TEE_SHM_MAPPED)) { dev_err(teedev->dev.parent, "only mapped allocations supported\n"); @@ -135,13 +152,13 @@ struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags) goto err_dev_put; } - shm->flags = flags; + shm->flags = flags | TEE_SHM_POOL; shm->teedev = teedev; shm->ctx = ctx; if (flags & TEE_SHM_DMA_BUF) - poolm = &teedev->pool->dma_buf_mgr; + poolm = teedev->pool->dma_buf_mgr; else - poolm = &teedev->pool->private_mgr; + poolm = teedev->pool->private_mgr; rc = poolm->ops->alloc(poolm, shm, size); if (rc) { @@ -171,9 +188,13 @@ struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags) goto err_rem; } } - mutex_lock(&teedev->mutex); - list_add_tail(&shm->link, &ctx->list_shm); - mutex_unlock(&teedev->mutex); + + if (ctx) { + teedev_ctx_get(ctx); + mutex_lock(&teedev->mutex); + list_add_tail(&shm->link, &ctx->list_shm); + mutex_unlock(&teedev->mutex); + } return shm; err_rem: @@ -188,8 +209,145 @@ err_dev_put: tee_device_put(teedev); return ret; } + +/** + * tee_shm_alloc() - Allocate shared memory + * @ctx: Context that allocates the shared memory + * @size: Requested size of shared memory + * @flags: Flags setting properties for the requested shared memory. + * + * Memory allocated as global shared memory is automatically freed when the + * TEE file pointer is closed. The @flags field uses the bits defined by + * TEE_SHM_* in . TEE_SHM_MAPPED must currently always be + * set. If TEE_SHM_DMA_BUF global shared memory will be allocated and + * associated with a dma-buf handle, else driver private memory. + */ +struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags) +{ + return __tee_shm_alloc(ctx, ctx->teedev, size, flags); +} EXPORT_SYMBOL_GPL(tee_shm_alloc); +struct tee_shm *tee_shm_priv_alloc(struct tee_device *teedev, size_t size) +{ + return __tee_shm_alloc(NULL, teedev, size, TEE_SHM_MAPPED); +} +EXPORT_SYMBOL_GPL(tee_shm_priv_alloc); + +struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr, + size_t length, u32 flags) +{ + struct tee_device *teedev = ctx->teedev; + const u32 req_flags = TEE_SHM_DMA_BUF | TEE_SHM_USER_MAPPED; + struct tee_shm *shm; + void *ret; + int rc; + int num_pages; + unsigned long start; + + if (flags != req_flags) + return ERR_PTR(-ENOTSUPP); + + if (!tee_device_get(teedev)) + return ERR_PTR(-EINVAL); + + if (!teedev->desc->ops->shm_register || + !teedev->desc->ops->shm_unregister) { + tee_device_put(teedev); + return ERR_PTR(-ENOTSUPP); + } + + teedev_ctx_get(ctx); + + shm = kzalloc(sizeof(*shm), GFP_KERNEL); + if (!shm) { + ret = ERR_PTR(-ENOMEM); + goto err; + } + + shm->flags = flags | TEE_SHM_REGISTER; + shm->teedev = teedev; + shm->ctx = ctx; + shm->id = -1; + start = rounddown(addr, PAGE_SIZE); + shm->offset = addr - start; + shm->size = length; + num_pages = (roundup(addr + length, PAGE_SIZE) - start) / PAGE_SIZE; + shm->pages = kcalloc(num_pages, sizeof(*shm->pages), GFP_KERNEL); + if (!shm->pages) { + ret = ERR_PTR(-ENOMEM); + goto err; + } + + rc = get_user_pages_fast(start, num_pages, 1, shm->pages); + if (rc > 0) + shm->num_pages = rc; + if (rc != num_pages) { + if (rc >= 0) + rc = -ENOMEM; + ret = ERR_PTR(rc); + goto err; + } + + mutex_lock(&teedev->mutex); + shm->id = idr_alloc(&teedev->idr, shm, 1, 0, GFP_KERNEL); + mutex_unlock(&teedev->mutex); + + if (shm->id < 0) { + ret = ERR_PTR(shm->id); + goto err; + } + + rc = teedev->desc->ops->shm_register(ctx, shm, shm->pages, + shm->num_pages, start); + if (rc) { + ret = ERR_PTR(rc); + goto err; + } + + if (flags & TEE_SHM_DMA_BUF) { + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + + exp_info.ops = &tee_shm_dma_buf_ops; + exp_info.size = shm->size; + exp_info.flags = O_RDWR; + exp_info.priv = shm; + + shm->dmabuf = dma_buf_export(&exp_info); + if (IS_ERR(shm->dmabuf)) { + ret = ERR_CAST(shm->dmabuf); + teedev->desc->ops->shm_unregister(ctx, shm); + goto err; + } + } + + mutex_lock(&teedev->mutex); + list_add_tail(&shm->link, &ctx->list_shm); + mutex_unlock(&teedev->mutex); + + return shm; +err: + if (shm) { + size_t n; + + if (shm->id >= 0) { + mutex_lock(&teedev->mutex); + idr_remove(&teedev->idr, shm->id); + mutex_unlock(&teedev->mutex); + } + if (shm->pages) { + for (n = 0; n < shm->num_pages; n++) + put_page(shm->pages[n]); + kfree(shm->pages); + } + } + kfree(shm); + teedev_ctx_put(ctx); + tee_device_put(teedev); + return ret; +} +EXPORT_SYMBOL_GPL(tee_shm_register); + /** * tee_shm_get_fd() - Increase reference count and return file descriptor * @shm: Shared memory handle @@ -197,10 +355,9 @@ EXPORT_SYMBOL_GPL(tee_shm_alloc); */ int tee_shm_get_fd(struct tee_shm *shm) { - u32 req_flags = TEE_SHM_MAPPED | TEE_SHM_DMA_BUF; int fd; - if ((shm->flags & req_flags) != req_flags) + if (!(shm->flags & TEE_SHM_DMA_BUF)) return -EINVAL; fd = dma_buf_fd(shm->dmabuf, O_CLOEXEC); @@ -238,6 +395,8 @@ EXPORT_SYMBOL_GPL(tee_shm_free); */ int tee_shm_va2pa(struct tee_shm *shm, void *va, phys_addr_t *pa) { + if (!(shm->flags & TEE_SHM_MAPPED)) + return -EINVAL; /* Check that we're in the range of the shm */ if ((char *)va < (char *)shm->kaddr) return -EINVAL; @@ -258,6 +417,8 @@ EXPORT_SYMBOL_GPL(tee_shm_va2pa); */ int tee_shm_pa2va(struct tee_shm *shm, phys_addr_t pa, void **va) { + if (!(shm->flags & TEE_SHM_MAPPED)) + return -EINVAL; /* Check that we're in the range of the shm */ if (pa < shm->paddr) return -EINVAL; @@ -284,6 +445,8 @@ EXPORT_SYMBOL_GPL(tee_shm_pa2va); */ void *tee_shm_get_va(struct tee_shm *shm, size_t offs) { + if (!(shm->flags & TEE_SHM_MAPPED)) + return ERR_PTR(-EINVAL); if (offs >= shm->size) return ERR_PTR(-EINVAL); return (char *)shm->kaddr + offs; @@ -335,17 +498,6 @@ struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id) } EXPORT_SYMBOL_GPL(tee_shm_get_from_id); -/** - * tee_shm_get_id() - Get id of a shared memory object - * @shm: Shared memory handle - * @returns id - */ -int tee_shm_get_id(struct tee_shm *shm) -{ - return shm->id; -} -EXPORT_SYMBOL_GPL(tee_shm_get_id); - /** * tee_shm_put() - Decrease reference count on a shared memory handle * @shm: Shared memory handle diff --git a/drivers/tee/tee_shm_pool.c b/drivers/tee/tee_shm_pool.c index fb4f8522a526..e6d4b9e4a864 100644 --- a/drivers/tee/tee_shm_pool.c +++ b/drivers/tee/tee_shm_pool.c @@ -44,49 +44,18 @@ static void pool_op_gen_free(struct tee_shm_pool_mgr *poolm, shm->kaddr = NULL; } +static void pool_op_gen_destroy_poolmgr(struct tee_shm_pool_mgr *poolm) +{ + gen_pool_destroy(poolm->private_data); + kfree(poolm); +} + static const struct tee_shm_pool_mgr_ops pool_ops_generic = { .alloc = pool_op_gen_alloc, .free = pool_op_gen_free, + .destroy_poolmgr = pool_op_gen_destroy_poolmgr, }; -static void pool_res_mem_destroy(struct tee_shm_pool *pool) -{ - gen_pool_destroy(pool->private_mgr.private_data); - gen_pool_destroy(pool->dma_buf_mgr.private_data); -} - -static int pool_res_mem_mgr_init(struct tee_shm_pool_mgr *mgr, - struct tee_shm_pool_mem_info *info, - int min_alloc_order) -{ - size_t page_mask = PAGE_SIZE - 1; - struct gen_pool *genpool = NULL; - int rc; - - /* - * Start and end must be page aligned - */ - if ((info->vaddr & page_mask) || (info->paddr & page_mask) || - (info->size & page_mask)) - return -EINVAL; - - genpool = gen_pool_create(min_alloc_order, -1); - if (!genpool) - return -ENOMEM; - - gen_pool_set_algo(genpool, gen_pool_best_fit, NULL); - rc = gen_pool_add_virt(genpool, info->vaddr, info->paddr, info->size, - -1); - if (rc) { - gen_pool_destroy(genpool); - return rc; - } - - mgr->private_data = genpool; - mgr->ops = &pool_ops_generic; - return 0; -} - /** * tee_shm_pool_alloc_res_mem() - Create a shared memory pool from reserved * memory range @@ -104,43 +73,110 @@ struct tee_shm_pool * tee_shm_pool_alloc_res_mem(struct tee_shm_pool_mem_info *priv_info, struct tee_shm_pool_mem_info *dmabuf_info) { - struct tee_shm_pool *pool = NULL; - int ret; - - pool = kzalloc(sizeof(*pool), GFP_KERNEL); - if (!pool) { - ret = -ENOMEM; - goto err; - } + struct tee_shm_pool_mgr *priv_mgr; + struct tee_shm_pool_mgr *dmabuf_mgr; + void *rc; /* * Create the pool for driver private shared memory */ - ret = pool_res_mem_mgr_init(&pool->private_mgr, priv_info, - 3 /* 8 byte aligned */); - if (ret) - goto err; + rc = tee_shm_pool_mgr_alloc_res_mem(priv_info->vaddr, priv_info->paddr, + priv_info->size, + 3 /* 8 byte aligned */); + if (IS_ERR(rc)) + return rc; + priv_mgr = rc; /* * Create the pool for dma_buf shared memory */ - ret = pool_res_mem_mgr_init(&pool->dma_buf_mgr, dmabuf_info, - PAGE_SHIFT); - if (ret) - goto err; + rc = tee_shm_pool_mgr_alloc_res_mem(dmabuf_info->vaddr, + dmabuf_info->paddr, + dmabuf_info->size, PAGE_SHIFT); + if (IS_ERR(rc)) + goto err_free_priv_mgr; + dmabuf_mgr = rc; - pool->destroy = pool_res_mem_destroy; - return pool; -err: - if (ret == -ENOMEM) - pr_err("%s: can't allocate memory for res_mem shared memory pool\n", __func__); - if (pool && pool->private_mgr.private_data) - gen_pool_destroy(pool->private_mgr.private_data); - kfree(pool); - return ERR_PTR(ret); + rc = tee_shm_pool_alloc(priv_mgr, dmabuf_mgr); + if (IS_ERR(rc)) + goto err_free_dmabuf_mgr; + + return rc; + +err_free_dmabuf_mgr: + tee_shm_pool_mgr_destroy(dmabuf_mgr); +err_free_priv_mgr: + tee_shm_pool_mgr_destroy(priv_mgr); + + return rc; } EXPORT_SYMBOL_GPL(tee_shm_pool_alloc_res_mem); +struct tee_shm_pool_mgr *tee_shm_pool_mgr_alloc_res_mem(unsigned long vaddr, + phys_addr_t paddr, + size_t size, + int min_alloc_order) +{ + const size_t page_mask = PAGE_SIZE - 1; + struct tee_shm_pool_mgr *mgr; + int rc; + + /* Start and end must be page aligned */ + if (vaddr & page_mask || paddr & page_mask || size & page_mask) + return ERR_PTR(-EINVAL); + + mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); + if (!mgr) + return ERR_PTR(-ENOMEM); + + mgr->private_data = gen_pool_create(min_alloc_order, -1); + if (!mgr->private_data) { + rc = -ENOMEM; + goto err; + } + + gen_pool_set_algo(mgr->private_data, gen_pool_best_fit, NULL); + rc = gen_pool_add_virt(mgr->private_data, vaddr, paddr, size, -1); + if (rc) { + gen_pool_destroy(mgr->private_data); + goto err; + } + + mgr->ops = &pool_ops_generic; + + return mgr; +err: + kfree(mgr); + + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(tee_shm_pool_mgr_alloc_res_mem); + +static bool check_mgr_ops(struct tee_shm_pool_mgr *mgr) +{ + return mgr && mgr->ops && mgr->ops->alloc && mgr->ops->free && + mgr->ops->destroy_poolmgr; +} + +struct tee_shm_pool *tee_shm_pool_alloc(struct tee_shm_pool_mgr *priv_mgr, + struct tee_shm_pool_mgr *dmabuf_mgr) +{ + struct tee_shm_pool *pool; + + if (!check_mgr_ops(priv_mgr) || !check_mgr_ops(dmabuf_mgr)) + return ERR_PTR(-EINVAL); + + pool = kzalloc(sizeof(*pool), GFP_KERNEL); + if (!pool) + return ERR_PTR(-ENOMEM); + + pool->private_mgr = priv_mgr; + pool->dma_buf_mgr = dmabuf_mgr; + + return pool; +} +EXPORT_SYMBOL_GPL(tee_shm_pool_alloc); + /** * tee_shm_pool_free() - Free a shared memory pool * @pool: The shared memory pool to free @@ -150,7 +186,10 @@ EXPORT_SYMBOL_GPL(tee_shm_pool_alloc_res_mem); */ void tee_shm_pool_free(struct tee_shm_pool *pool) { - pool->destroy(pool); + if (pool->private_mgr) + tee_shm_pool_mgr_destroy(pool->private_mgr); + if (pool->dma_buf_mgr) + tee_shm_pool_mgr_destroy(pool->dma_buf_mgr); kfree(pool); } EXPORT_SYMBOL_GPL(tee_shm_pool_free); diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h new file mode 100644 index 000000000000..ad6f55dabd6d --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-axg-reset.h @@ -0,0 +1,124 @@ +/* + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * Copyright (c) 2017 Amlogic, inc. + * Author: Yixun Lan + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD) + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +#define RESET_PCIE_A 1 +#define RESET_PCIE_B 2 +#define RESET_DDR_TOP 3 +/* 4 */ +#define RESET_VIU 5 +#define RESET_PCIE_PHY 6 +#define RESET_PCIE_APB 7 +/* 8 */ +/* 9 */ +#define RESET_VENC 10 +#define RESET_ASSIST 11 +/* 12 */ +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +/* 18-21 */ +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +/* 28-31 */ +/* RESET1 */ +/* 32 */ +/* 33 */ +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +/* 37 */ +#define RESET_AHB_SRAM 38 +/* 39 */ +/* 40 */ +#define RESET_DMA 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +/* 44 */ +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61-63 */ +/* RESET2 */ +/* 64 */ +/* 65 */ +#define RESET_AUDIO 66 +/* 67 */ +#define RESET_MIPI_HOST 68 +#define RESET_AUDIO_LOCKER 69 +#define RESET_GE2D 70 +/* 71-76 */ +#define RESET_AO_CPU_RESET 77 +/* 78-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +/* 97-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +#define RESET_MIPI_PHY 130 +/* 131-140 */ +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +/* 194 */ +/* 195 */ +#define RESET_PERIPHS_I2C_MASTER_0 196 +/* 197-200 */ +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1 202 +/* 203-204 */ +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_I2C_MASTER_3 206 +/* 207-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +#define RESET_DMC_VPU_PIPEL 233 +/* 234-255 */ + +#endif diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h new file mode 100644 index 000000000000..1be356330b96 --- /dev/null +++ b/include/linux/platform_data/ti-sysc.h @@ -0,0 +1,86 @@ +#ifndef __TI_SYSC_DATA_H__ +#define __TI_SYSC_DATA_H__ + +enum ti_sysc_module_type { + TI_SYSC_OMAP2, + TI_SYSC_OMAP2_TIMER, + TI_SYSC_OMAP3_SHAM, + TI_SYSC_OMAP3_AES, + TI_SYSC_OMAP4, + TI_SYSC_OMAP4_TIMER, + TI_SYSC_OMAP4_SIMPLE, + TI_SYSC_OMAP34XX_SR, + TI_SYSC_OMAP36XX_SR, + TI_SYSC_OMAP4_SR, + TI_SYSC_OMAP4_MCASP, + TI_SYSC_OMAP4_USB_HOST_FS, +}; + +/** + * struct sysc_regbits - TI OCP_SYSCONFIG register field offsets + * @midle_shift: Offset of the midle bit + * @clkact_shift: Offset of the clockactivity bit + * @sidle_shift: Offset of the sidle bit + * @enwkup_shift: Offset of the enawakeup bit + * @srst_shift: Offset of the softreset bit + * @autoidle_shift: Offset of the autoidle bit + * @dmadisable_shift: Offset of the dmadisable bit + * @emufree_shift; Offset of the emufree bit + * + * Note that 0 is a valid shift, and for ti-sysc.c -ENODEV can be used if a + * feature is not available. + */ +struct sysc_regbits { + s8 midle_shift; + s8 clkact_shift; + s8 sidle_shift; + s8 enwkup_shift; + s8 srst_shift; + s8 autoidle_shift; + s8 dmadisable_shift; + s8 emufree_shift; +}; + +#define SYSC_QUIRK_RESET_STATUS BIT(7) +#define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) +#define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) +#define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) +#define SYSC_QUIRK_OPT_CLKS_IN_RESET BIT(3) +#define SYSC_QUIRK_16BIT BIT(2) +#define SYSC_QUIRK_UNCACHED BIT(1) +#define SYSC_QUIRK_USE_CLOCKACT BIT(0) + +#define SYSC_NR_IDLEMODES 4 + +/** + * struct sysc_capabilities - capabilities for an interconnect target module + * + * @sysc_mask: bitmask of supported SYSCONFIG register bits + * @regbits: bitmask of SYSCONFIG register bits + * @mod_quirks: bitmask of module specific quirks + */ +struct sysc_capabilities { + const enum ti_sysc_module_type type; + const u32 sysc_mask; + const struct sysc_regbits *regbits; + const u32 mod_quirks; +}; + +/** + * struct sysc_config - configuration for an interconnect target module + * @sysc_val: configured value for sysc register + * @midlemodes: bitmask of supported master idle modes + * @sidlemodes: bitmask of supported master idle modes + * @srst_udelay: optional delay needed after OCP soft reset + * @quirks: bitmask of enabled quirks + */ +struct sysc_config { + u32 sysc_val; + u32 syss_mask; + u8 midlemodes; + u8 sidlemodes; + u8 srst_udelay; + u32 quirks; +}; + +#endif /* __TI_SYSC_DATA_H__ */ diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 1fd27d68926b..b401b962afff 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -13,6 +13,9 @@ #ifndef __QCOM_SCM_H #define __QCOM_SCM_H +#include +#include + #define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) #define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0 #define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1 diff --git a/include/linux/reset.h b/include/linux/reset.h index 4c7871ddf3c6..09732c36f351 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -2,8 +2,10 @@ #ifndef _LINUX_RESET_H_ #define _LINUX_RESET_H_ -#include +#include +struct device; +struct device_node; struct reset_control; #ifdef CONFIG_RESET_CONTROLLER @@ -20,22 +22,16 @@ struct reset_control *__reset_control_get(struct device *dev, const char *id, int index, bool shared, bool optional); void reset_control_put(struct reset_control *rstc); +int __device_reset(struct device *dev, bool optional); struct reset_control *__devm_reset_control_get(struct device *dev, const char *id, int index, bool shared, bool optional); -int __must_check device_reset(struct device *dev); - struct reset_control *devm_reset_control_array_get(struct device *dev, bool shared, bool optional); struct reset_control *of_reset_control_array_get(struct device_node *np, bool shared, bool optional); -static inline int device_reset_optional(struct device *dev) -{ - return device_reset(dev); -} - #else static inline int reset_control_reset(struct reset_control *rstc) @@ -62,15 +58,9 @@ static inline void reset_control_put(struct reset_control *rstc) { } -static inline int __must_check device_reset(struct device *dev) +static inline int __device_reset(struct device *dev, bool optional) { - WARN_ON(1); - return -ENOTSUPP; -} - -static inline int device_reset_optional(struct device *dev) -{ - return -ENOTSUPP; + return optional ? 0 : -ENOTSUPP; } static inline struct reset_control *__of_reset_control_get( @@ -109,6 +99,16 @@ of_reset_control_array_get(struct device_node *np, bool shared, bool optional) #endif /* CONFIG_RESET_CONTROLLER */ +static inline int __must_check device_reset(struct device *dev) +{ + return __device_reset(dev, false); +} + +static inline int device_reset_optional(struct device *dev) +{ + return __device_reset(dev, true); +} + /** * reset_control_get_exclusive - Lookup and obtain an exclusive reference * to a reset controller. @@ -127,9 +127,6 @@ of_reset_control_array_get(struct device_node *np, bool shared, bool optional) static inline struct reset_control * __must_check reset_control_get_exclusive(struct device *dev, const char *id) { -#ifndef CONFIG_RESET_CONTROLLER - WARN_ON(1); -#endif return __reset_control_get(dev, id, 0, false, false); } @@ -275,9 +272,6 @@ static inline struct reset_control * __must_check devm_reset_control_get_exclusive(struct device *dev, const char *id) { -#ifndef CONFIG_RESET_CONTROLLER - WARN_ON(1); -#endif return __devm_reset_control_get(dev, id, 0, false, false); } @@ -350,18 +344,6 @@ devm_reset_control_get_shared_by_index(struct device *dev, int index) * These inline function calls will be removed once all consumers * have been moved over to the new explicit API. */ -static inline struct reset_control *reset_control_get( - struct device *dev, const char *id) -{ - return reset_control_get_exclusive(dev, id); -} - -static inline struct reset_control *reset_control_get_optional( - struct device *dev, const char *id) -{ - return reset_control_get_optional_exclusive(dev, id); -} - static inline struct reset_control *of_reset_control_get( struct device_node *node, const char *id) { diff --git a/include/linux/soc/brcmstb/brcmstb.h b/include/linux/soc/brcmstb/brcmstb.h index 12e548938bbb..8e884e0dda0a 100644 --- a/include/linux/soc/brcmstb/brcmstb.h +++ b/include/linux/soc/brcmstb/brcmstb.h @@ -12,12 +12,6 @@ static inline u32 BRCM_REV(u32 reg) return reg & 0xff; } -/* - * Bus Interface Unit control register setup, must happen early during boot, - * before SMP is brought up, called by machine entry point. - */ -void brcmstb_biuctrl_init(void); - /* * Helper functions for getting family or product id from the * SoC driver. diff --git a/include/linux/soc/qcom/qmi.h b/include/linux/soc/qcom/qmi.h new file mode 100644 index 000000000000..f4de33654a60 --- /dev/null +++ b/include/linux/soc/qcom/qmi.h @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2017, Linaro Ltd. + */ +#ifndef __QMI_HELPERS_H__ +#define __QMI_HELPERS_H__ + +#include +#include +#include +#include +#include +#include + +struct socket; + +/** + * qmi_header - wireformat header of QMI messages + * @type: type of message + * @txn_id: transaction id + * @msg_id: message id + * @msg_len: length of message payload following header + */ +struct qmi_header { + u8 type; + u16 txn_id; + u16 msg_id; + u16 msg_len; +} __packed; + +#define QMI_REQUEST 0 +#define QMI_RESPONSE 2 +#define QMI_INDICATION 4 + +#define QMI_COMMON_TLV_TYPE 0 + +enum qmi_elem_type { + QMI_EOTI, + QMI_OPT_FLAG, + QMI_DATA_LEN, + QMI_UNSIGNED_1_BYTE, + QMI_UNSIGNED_2_BYTE, + QMI_UNSIGNED_4_BYTE, + QMI_UNSIGNED_8_BYTE, + QMI_SIGNED_2_BYTE_ENUM, + QMI_SIGNED_4_BYTE_ENUM, + QMI_STRUCT, + QMI_STRING, +}; + +enum qmi_array_type { + NO_ARRAY, + STATIC_ARRAY, + VAR_LEN_ARRAY, +}; + +/** + * struct qmi_elem_info - describes how to encode a single QMI element + * @data_type: Data type of this element. + * @elem_len: Array length of this element, if an array. + * @elem_size: Size of a single instance of this data type. + * @array_type: Array type of this element. + * @tlv_type: QMI message specific type to identify which element + * is present in an incoming message. + * @offset: Specifies the offset of the first instance of this + * element in the data structure. + * @ei_array: Null-terminated array of @qmi_elem_info to describe nested + * structures. + */ +struct qmi_elem_info { + enum qmi_elem_type data_type; + u32 elem_len; + u32 elem_size; + enum qmi_array_type array_type; + u8 tlv_type; + u32 offset; + struct qmi_elem_info *ei_array; +}; + +#define QMI_RESULT_SUCCESS_V01 0 +#define QMI_RESULT_FAILURE_V01 1 + +#define QMI_ERR_NONE_V01 0 +#define QMI_ERR_MALFORMED_MSG_V01 1 +#define QMI_ERR_NO_MEMORY_V01 2 +#define QMI_ERR_INTERNAL_V01 3 +#define QMI_ERR_CLIENT_IDS_EXHAUSTED_V01 5 +#define QMI_ERR_INVALID_ID_V01 41 +#define QMI_ERR_ENCODING_V01 58 +#define QMI_ERR_INCOMPATIBLE_STATE_V01 90 +#define QMI_ERR_NOT_SUPPORTED_V01 94 + +/** + * qmi_response_type_v01 - common response header (decoded) + * @result: result of the transaction + * @error: error value, when @result is QMI_RESULT_FAILURE_V01 + */ +struct qmi_response_type_v01 { + u16 result; + u16 error; +}; + +extern struct qmi_elem_info qmi_response_type_v01_ei[]; + +/** + * struct qmi_service - context to track lookup-results + * @service: service type + * @version: version of the @service + * @instance: instance id of the @service + * @node: node of the service + * @port: port of the service + * @priv: handle for client's use + * @list_node: list_head for house keeping + */ +struct qmi_service { + unsigned int service; + unsigned int version; + unsigned int instance; + + unsigned int node; + unsigned int port; + + void *priv; + struct list_head list_node; +}; + +struct qmi_handle; + +/** + * struct qmi_ops - callbacks for qmi_handle + * @new_server: inform client of a new_server lookup-result, returning + * successfully from this call causes the library to call + * @del_server as the service is removed from the + * lookup-result. @priv of the qmi_service can be used by + * the client + * @del_server: inform client of a del_server lookup-result + * @net_reset: inform client that the name service was restarted and + * that and any state needs to be released + * @msg_handler: invoked for incoming messages, allows a client to + * override the usual QMI message handler + * @bye: inform a client that all clients from a node are gone + * @del_client: inform a client that a particular client is gone + */ +struct qmi_ops { + int (*new_server)(struct qmi_handle *qmi, struct qmi_service *svc); + void (*del_server)(struct qmi_handle *qmi, struct qmi_service *svc); + void (*net_reset)(struct qmi_handle *qmi); + void (*msg_handler)(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + const void *data, size_t count); + void (*bye)(struct qmi_handle *qmi, unsigned int node); + void (*del_client)(struct qmi_handle *qmi, + unsigned int node, unsigned int port); +}; + +/** + * struct qmi_txn - transaction context + * @qmi: QMI handle this transaction is associated with + * @id: transaction id + * @lock: for synchronization between handler and waiter of messages + * @completion: completion object as the transaction receives a response + * @result: result code for the completed transaction + * @ei: description of the QMI encoded response (optional) + * @dest: destination buffer to decode message into (optional) + */ +struct qmi_txn { + struct qmi_handle *qmi; + + int id; + + struct mutex lock; + struct completion completion; + int result; + + struct qmi_elem_info *ei; + void *dest; +}; + +/** + * struct qmi_msg_handler - description of QMI message handler + * @type: type of message + * @msg_id: message id + * @ei: description of the QMI encoded message + * @decoded_size: size of the decoded object + * @fn: function to invoke as the message is decoded + */ +struct qmi_msg_handler { + unsigned int type; + unsigned int msg_id; + + struct qmi_elem_info *ei; + + size_t decoded_size; + void (*fn)(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, const void *decoded); +}; + +/** + * struct qmi_handle - QMI context + * @sock: socket handle + * @sock_lock: synchronization of @sock modifications + * @sq: sockaddr of @sock + * @work: work for handling incoming messages + * @wq: workqueue to post @work on + * @recv_buf: scratch buffer for handling incoming messages + * @recv_buf_size: size of @recv_buf + * @lookups: list of registered lookup requests + * @lookup_results: list of lookup-results advertised to the client + * @services: list of registered services (by this client) + * @ops: reference to callbacks + * @txns: outstanding transactions + * @txn_lock: lock for modifications of @txns + * @handlers: list of handlers for incoming messages + */ +struct qmi_handle { + struct socket *sock; + struct mutex sock_lock; + + struct sockaddr_qrtr sq; + + struct work_struct work; + struct workqueue_struct *wq; + + void *recv_buf; + size_t recv_buf_size; + + struct list_head lookups; + struct list_head lookup_results; + struct list_head services; + + struct qmi_ops ops; + + struct idr txns; + struct mutex txn_lock; + + const struct qmi_msg_handler *handlers; +}; + +int qmi_add_lookup(struct qmi_handle *qmi, unsigned int service, + unsigned int version, unsigned int instance); +int qmi_add_server(struct qmi_handle *qmi, unsigned int service, + unsigned int version, unsigned int instance); + +int qmi_handle_init(struct qmi_handle *qmi, size_t max_msg_len, + const struct qmi_ops *ops, + const struct qmi_msg_handler *handlers); +void qmi_handle_release(struct qmi_handle *qmi); + +ssize_t qmi_send_request(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, int msg_id, size_t len, + struct qmi_elem_info *ei, const void *c_struct); +ssize_t qmi_send_response(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, int msg_id, size_t len, + struct qmi_elem_info *ei, const void *c_struct); +ssize_t qmi_send_indication(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + int msg_id, size_t len, struct qmi_elem_info *ei, + const void *c_struct); + +void *qmi_encode_message(int type, unsigned int msg_id, size_t *len, + unsigned int txn_id, struct qmi_elem_info *ei, + const void *c_struct); + +int qmi_decode_message(const void *buf, size_t len, + struct qmi_elem_info *ei, void *c_struct); + +int qmi_txn_init(struct qmi_handle *qmi, struct qmi_txn *txn, + struct qmi_elem_info *ei, void *c_struct); +int qmi_txn_wait(struct qmi_txn *txn, unsigned long timeout); +void qmi_txn_cancel(struct qmi_txn *txn); + +#endif diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h index cb889afe576b..a2b3dfcee0b5 100644 --- a/include/linux/tee_drv.h +++ b/include/linux/tee_drv.h @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -25,8 +26,12 @@ * specific TEE driver. */ -#define TEE_SHM_MAPPED 0x1 /* Memory mapped by the kernel */ -#define TEE_SHM_DMA_BUF 0x2 /* Memory with dma-buf handle */ +#define TEE_SHM_MAPPED BIT(0) /* Memory mapped by the kernel */ +#define TEE_SHM_DMA_BUF BIT(1) /* Memory with dma-buf handle */ +#define TEE_SHM_EXT_DMA_BUF BIT(2) /* Memory with dma-buf handle */ +#define TEE_SHM_REGISTER BIT(3) /* Memory registered in secure world */ +#define TEE_SHM_USER_MAPPED BIT(4) /* Memory mapped in user space */ +#define TEE_SHM_POOL BIT(5) /* Memory allocated from pool */ struct device; struct tee_device; @@ -38,11 +43,17 @@ struct tee_shm_pool; * @teedev: pointer to this drivers struct tee_device * @list_shm: List of shared memory object owned by this context * @data: driver specific context data, managed by the driver + * @refcount: reference counter for this structure + * @releasing: flag that indicates if context is being released right now. + * It is needed to break circular dependency on context during + * shared memory release. */ struct tee_context { struct tee_device *teedev; struct list_head list_shm; void *data; + struct kref refcount; + bool releasing; }; struct tee_param_memref { @@ -76,6 +87,8 @@ struct tee_param { * @cancel_req: request cancel of an ongoing invoke or open * @supp_revc: called for supplicant to get a command * @supp_send: called for supplicant to send a response + * @shm_register: register shared memory buffer in TEE + * @shm_unregister: unregister shared memory buffer in TEE */ struct tee_driver_ops { void (*get_version)(struct tee_device *teedev, @@ -94,6 +107,10 @@ struct tee_driver_ops { struct tee_param *param); int (*supp_send)(struct tee_context *ctx, u32 ret, u32 num_params, struct tee_param *param); + int (*shm_register)(struct tee_context *ctx, struct tee_shm *shm, + struct page **pages, size_t num_pages, + unsigned long start); + int (*shm_unregister)(struct tee_context *ctx, struct tee_shm *shm); }; /** @@ -149,6 +166,97 @@ int tee_device_register(struct tee_device *teedev); */ void tee_device_unregister(struct tee_device *teedev); +/** + * struct tee_shm - shared memory object + * @teedev: device used to allocate the object + * @ctx: context using the object, if NULL the context is gone + * @link link element + * @paddr: physical address of the shared memory + * @kaddr: virtual address of the shared memory + * @size: size of shared memory + * @offset: offset of buffer in user space + * @pages: locked pages from userspace + * @num_pages: number of locked pages + * @dmabuf: dmabuf used to for exporting to user space + * @flags: defined by TEE_SHM_* in tee_drv.h + * @id: unique id of a shared memory object on this device + * + * This pool is only supposed to be accessed directly from the TEE + * subsystem and from drivers that implements their own shm pool manager. + */ +struct tee_shm { + struct tee_device *teedev; + struct tee_context *ctx; + struct list_head link; + phys_addr_t paddr; + void *kaddr; + size_t size; + unsigned int offset; + struct page **pages; + size_t num_pages; + struct dma_buf *dmabuf; + u32 flags; + int id; +}; + +/** + * struct tee_shm_pool_mgr - shared memory manager + * @ops: operations + * @private_data: private data for the shared memory manager + */ +struct tee_shm_pool_mgr { + const struct tee_shm_pool_mgr_ops *ops; + void *private_data; +}; + +/** + * struct tee_shm_pool_mgr_ops - shared memory pool manager operations + * @alloc: called when allocating shared memory + * @free: called when freeing shared memory + * @destroy_poolmgr: called when destroying the pool manager + */ +struct tee_shm_pool_mgr_ops { + int (*alloc)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm, + size_t size); + void (*free)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm); + void (*destroy_poolmgr)(struct tee_shm_pool_mgr *poolmgr); +}; + +/** + * tee_shm_pool_alloc() - Create a shared memory pool from shm managers + * @priv_mgr: manager for driver private shared memory allocations + * @dmabuf_mgr: manager for dma-buf shared memory allocations + * + * Allocation with the flag TEE_SHM_DMA_BUF set will use the range supplied + * in @dmabuf, others will use the range provided by @priv. + * + * @returns pointer to a 'struct tee_shm_pool' or an ERR_PTR on failure. + */ +struct tee_shm_pool *tee_shm_pool_alloc(struct tee_shm_pool_mgr *priv_mgr, + struct tee_shm_pool_mgr *dmabuf_mgr); + +/* + * tee_shm_pool_mgr_alloc_res_mem() - Create a shm manager for reserved + * memory + * @vaddr: Virtual address of start of pool + * @paddr: Physical address of start of pool + * @size: Size in bytes of the pool + * + * @returns pointer to a 'struct tee_shm_pool_mgr' or an ERR_PTR on failure. + */ +struct tee_shm_pool_mgr *tee_shm_pool_mgr_alloc_res_mem(unsigned long vaddr, + phys_addr_t paddr, + size_t size, + int min_alloc_order); + +/** + * tee_shm_pool_mgr_destroy() - Free a shared memory manager + */ +static inline void tee_shm_pool_mgr_destroy(struct tee_shm_pool_mgr *poolm) +{ + poolm->ops->destroy_poolmgr(poolm); +} + /** * struct tee_shm_pool_mem_info - holds information needed to create a shared * memory pool @@ -210,6 +318,40 @@ void *tee_get_drvdata(struct tee_device *teedev); */ struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags); +/** + * tee_shm_priv_alloc() - Allocate shared memory privately + * @dev: Device that allocates the shared memory + * @size: Requested size of shared memory + * + * Allocates shared memory buffer that is not associated with any client + * context. Such buffers are owned by TEE driver and used for internal calls. + * + * @returns a pointer to 'struct tee_shm' + */ +struct tee_shm *tee_shm_priv_alloc(struct tee_device *teedev, size_t size); + +/** + * tee_shm_register() - Register shared memory buffer + * @ctx: Context that registers the shared memory + * @addr: Address is userspace of the shared buffer + * @length: Length of the shared buffer + * @flags: Flags setting properties for the requested shared memory. + * + * @returns a pointer to 'struct tee_shm' + */ +struct tee_shm *tee_shm_register(struct tee_context *ctx, unsigned long addr, + size_t length, u32 flags); + +/** + * tee_shm_is_registered() - Check if shared memory object in registered in TEE + * @shm: Shared memory handle + * @returns true if object is registered in TEE + */ +static inline bool tee_shm_is_registered(struct tee_shm *shm) +{ + return shm && (shm->flags & TEE_SHM_REGISTER); +} + /** * tee_shm_free() - Free shared memory * @shm: Handle to shared memory to free @@ -259,12 +401,48 @@ void *tee_shm_get_va(struct tee_shm *shm, size_t offs); */ int tee_shm_get_pa(struct tee_shm *shm, size_t offs, phys_addr_t *pa); +/** + * tee_shm_get_size() - Get size of shared memory buffer + * @shm: Shared memory handle + * @returns size of shared memory + */ +static inline size_t tee_shm_get_size(struct tee_shm *shm) +{ + return shm->size; +} + +/** + * tee_shm_get_pages() - Get list of pages that hold shared buffer + * @shm: Shared memory handle + * @num_pages: Number of pages will be stored there + * @returns pointer to pages array + */ +static inline struct page **tee_shm_get_pages(struct tee_shm *shm, + size_t *num_pages) +{ + *num_pages = shm->num_pages; + return shm->pages; +} + +/** + * tee_shm_get_page_offset() - Get shared buffer offset from page start + * @shm: Shared memory handle + * @returns page offset of shared buffer + */ +static inline size_t tee_shm_get_page_offset(struct tee_shm *shm) +{ + return shm->offset; +} + /** * tee_shm_get_id() - Get id of a shared memory object * @shm: Shared memory handle * @returns id */ -int tee_shm_get_id(struct tee_shm *shm); +static inline int tee_shm_get_id(struct tee_shm *shm) +{ + return shm->id; +} /** * tee_shm_get_from_id() - Find shared memory object and increase reference @@ -275,4 +453,16 @@ int tee_shm_get_id(struct tee_shm *shm); */ struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id); +static inline bool tee_param_is_memref(struct tee_param *param) +{ + switch (param->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) { + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT: + case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT: + return true; + default: + return false; + } +} + #endif /*__TEE_DRV_H*/ diff --git a/include/linux/ti-emif-sram.h b/include/linux/ti-emif-sram.h new file mode 100644 index 000000000000..45bc6b376492 --- /dev/null +++ b/include/linux/ti-emif-sram.h @@ -0,0 +1,69 @@ +/* + * TI AM33XX EMIF Routines + * + * Copyright (C) 2016-2017 Texas Instruments Inc. + * Dave Gerlach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __LINUX_TI_EMIF_H +#define __LINUX_TI_EMIF_H + +#include +#include +#ifndef __ASSEMBLY__ + +struct emif_regs_amx3 { + u32 emif_sdcfg_val; + u32 emif_timing1_val; + u32 emif_timing2_val; + u32 emif_timing3_val; + u32 emif_ref_ctrl_val; + u32 emif_zqcfg_val; + u32 emif_pmcr_val; + u32 emif_pmcr_shdw_val; + u32 emif_rd_wr_level_ramp_ctrl; + u32 emif_rd_wr_exec_thresh; + u32 emif_cos_config; + u32 emif_priority_to_cos_mapping; + u32 emif_connect_id_serv_1_map; + u32 emif_connect_id_serv_2_map; + u32 emif_ocp_config_val; + u32 emif_lpddr2_nvm_tim; + u32 emif_lpddr2_nvm_tim_shdw; + u32 emif_dll_calib_ctrl_val; + u32 emif_dll_calib_ctrl_val_shdw; + u32 emif_ddr_phy_ctlr_1; + u32 emif_ext_phy_ctrl_vals[120]; +}; + +struct ti_emif_pm_data { + void __iomem *ti_emif_base_addr_virt; + phys_addr_t ti_emif_base_addr_phys; + unsigned long ti_emif_sram_config; + struct emif_regs_amx3 *regs_virt; + phys_addr_t regs_phys; +} __packed __aligned(8); + +struct ti_emif_pm_functions { + u32 save_context; + u32 restore_context; + u32 enter_sr; + u32 exit_sr; + u32 abort_sr; +} __packed __aligned(8); + +struct gen_pool; + +int ti_emif_copy_pm_function_table(struct gen_pool *sram_pool, void *dst); +int ti_emif_get_mem_type(void); + +#endif +#endif /* __LINUX_TI_EMIF_H */ diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index 44202ff897fd..233bae954970 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -51,6 +51,12 @@ struct tegra_smmu_swgroup { unsigned int reg; }; +struct tegra_smmu_group_soc { + const char *name; + const unsigned int *swgroups; + unsigned int num_swgroups; +}; + struct tegra_smmu_soc { const struct tegra_mc_client *clients; unsigned int num_clients; @@ -58,6 +64,9 @@ struct tegra_smmu_soc { const struct tegra_smmu_swgroup *swgroups; unsigned int num_swgroups; + const struct tegra_smmu_group_soc *groups; + unsigned int num_groups; + bool supports_round_robin_arbitration; bool supports_request_limit; diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 688782e90140..4b9eb064d7e7 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -50,6 +50,7 @@ #define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */ #define TEE_GEN_CAP_PRIVILEGED (1 << 1)/* Privileged device (for supplicant) */ +#define TEE_GEN_CAP_REG_MEM (1 << 2)/* Supports registering shared memory */ /* * TEE Implementation ID @@ -154,6 +155,13 @@ struct tee_ioctl_buf_data { */ #define TEE_IOCTL_PARAM_ATTR_TYPE_MASK 0xff +/* Meta parameter carrying extra information about the message. */ +#define TEE_IOCTL_PARAM_ATTR_META 0x100 + +/* Mask of all known attr bits */ +#define TEE_IOCTL_PARAM_ATTR_MASK \ + (TEE_IOCTL_PARAM_ATTR_TYPE_MASK | TEE_IOCTL_PARAM_ATTR_META) + /* * Matches TEEC_LOGIN_* in GP TEE Client API * Are only defined for GP compliant TEEs @@ -332,6 +340,35 @@ struct tee_iocl_supp_send_arg { #define TEE_IOC_SUPPL_SEND _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 7, \ struct tee_ioctl_buf_data) +/** + * struct tee_ioctl_shm_register_data - Shared memory register argument + * @addr: [in] Start address of shared memory to register + * @length: [in/out] Length of shared memory to register + * @flags: [in/out] Flags to/from registration. + * @id: [out] Identifier of the shared memory + * + * The flags field should currently be zero as input. Updated by the call + * with actual flags as defined by TEE_IOCTL_SHM_* above. + * This structure is used as argument for TEE_IOC_SHM_REGISTER below. + */ +struct tee_ioctl_shm_register_data { + __u64 addr; + __u64 length; + __u32 flags; + __s32 id; +}; + +/** + * TEE_IOC_SHM_REGISTER - Register shared memory argument + * + * Registers shared memory between the user space process and secure OS. + * + * Returns a file descriptor on success or < 0 on failure + * + * The shared memory is unregisterred when the descriptor is closed. + */ +#define TEE_IOC_SHM_REGISTER _IOWR(TEE_IOC_MAGIC, TEE_IOC_BASE + 9, \ + struct tee_ioctl_shm_register_data) /* * Five syscalls are used when communicating with the TEE driver. * open(): opens the device associated with the driver