[ARM] 4328/1: Move i.MX UART regs to driver
This patch moves the i.MX UART register descriptions from include/asm-arm/arch-imx/imx-regs.h to the serial driver itself. This helps using the driver on other architectures like mx31 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
parent
235b185ce4
commit
ff4bfb2163
|
@ -46,6 +46,122 @@
|
|||
#include <asm/hardware.h>
|
||||
#include <asm/arch/imx-uart.h>
|
||||
|
||||
/* Register definitions */
|
||||
#define URXD0 0x0 /* Receiver Register */
|
||||
#define URTX0 0x40 /* Transmitter Register */
|
||||
#define UCR1 0x80 /* Control Register 1 */
|
||||
#define UCR2 0x84 /* Control Register 2 */
|
||||
#define UCR3 0x88 /* Control Register 3 */
|
||||
#define UCR4 0x8c /* Control Register 4 */
|
||||
#define UFCR 0x90 /* FIFO Control Register */
|
||||
#define USR1 0x94 /* Status Register 1 */
|
||||
#define USR2 0x98 /* Status Register 2 */
|
||||
#define UESC 0x9c /* Escape Character Register */
|
||||
#define UTIM 0xa0 /* Escape Timer Register */
|
||||
#define UBIR 0xa4 /* BRM Incremental Register */
|
||||
#define UBMR 0xa8 /* BRM Modulator Register */
|
||||
#define UBRC 0xac /* Baud Rate Count Register */
|
||||
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
|
||||
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
|
||||
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
|
||||
#define BIPR4 0xbc /* Incremental Preset Register 4 */
|
||||
#define BMPR1 0xc0 /* BRM Modulator Register 1 */
|
||||
#define BMPR2 0xc4 /* BRM Modulator Register 2 */
|
||||
#define BMPR3 0xc8 /* BRM Modulator Register 3 */
|
||||
#define BMPR4 0xcc /* BRM Modulator Register 4 */
|
||||
#define UTS 0xd0 /* UART Test Register */
|
||||
|
||||
/* UART Control Register Bit Fields.*/
|
||||
#define URXD_CHARRDY (1<<15)
|
||||
#define URXD_ERR (1<<14)
|
||||
#define URXD_OVRRUN (1<<13)
|
||||
#define URXD_FRMERR (1<<12)
|
||||
#define URXD_BRK (1<<11)
|
||||
#define URXD_PRERR (1<<10)
|
||||
#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
|
||||
#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
|
||||
#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
|
||||
#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
|
||||
#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
|
||||
#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
|
||||
#define UCR1_IREN (1<<7) /* Infrared interface enable */
|
||||
#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
|
||||
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
|
||||
#define UCR1_SNDBRK (1<<4) /* Send break */
|
||||
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
|
||||
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
|
||||
#define UCR1_DOZE (1<<1) /* Doze */
|
||||
#define UCR1_UARTEN (1<<0) /* UART enabled */
|
||||
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
|
||||
#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
|
||||
#define UCR2_CTSC (1<<13) /* CTS pin control */
|
||||
#define UCR2_CTS (1<<12) /* Clear to send */
|
||||
#define UCR2_ESCEN (1<<11) /* Escape enable */
|
||||
#define UCR2_PREN (1<<8) /* Parity enable */
|
||||
#define UCR2_PROE (1<<7) /* Parity odd/even */
|
||||
#define UCR2_STPB (1<<6) /* Stop */
|
||||
#define UCR2_WS (1<<5) /* Word size */
|
||||
#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
|
||||
#define UCR2_TXEN (1<<2) /* Transmitter enabled */
|
||||
#define UCR2_RXEN (1<<1) /* Receiver enabled */
|
||||
#define UCR2_SRST (1<<0) /* SW reset */
|
||||
#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
|
||||
#define UCR3_PARERREN (1<<12) /* Parity enable */
|
||||
#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
|
||||
#define UCR3_DSR (1<<10) /* Data set ready */
|
||||
#define UCR3_DCD (1<<9) /* Data carrier detect */
|
||||
#define UCR3_RI (1<<8) /* Ring indicator */
|
||||
#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
|
||||
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
|
||||
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
|
||||
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
|
||||
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
|
||||
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
|
||||
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
|
||||
#define UCR3_BPEN (1<<0) /* Preset registers enable */
|
||||
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
|
||||
#define UCR4_INVR (1<<9) /* Inverted infrared reception */
|
||||
#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
|
||||
#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
|
||||
#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
|
||||
#define UCR4_IRSC (1<<5) /* IR special case */
|
||||
#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
|
||||
#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
|
||||
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
|
||||
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
|
||||
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
|
||||
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
|
||||
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
|
||||
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
|
||||
#define USR1_RTSS (1<<14) /* RTS pin status */
|
||||
#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
|
||||
#define USR1_RTSD (1<<12) /* RTS delta */
|
||||
#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
|
||||
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
|
||||
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
|
||||
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
|
||||
#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
|
||||
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
|
||||
#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
|
||||
#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
|
||||
#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
|
||||
#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
|
||||
#define USR2_IDLE (1<<12) /* Idle condition */
|
||||
#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
|
||||
#define USR2_WAKE (1<<7) /* Wake */
|
||||
#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
|
||||
#define USR2_TXDC (1<<3) /* Transmitter complete */
|
||||
#define USR2_BRCD (1<<2) /* Break condition */
|
||||
#define USR2_ORE (1<<1) /* Overrun error */
|
||||
#define USR2_RDR (1<<0) /* Recv data ready */
|
||||
#define UTS_FRCPERR (1<<13) /* Force parity error */
|
||||
#define UTS_LOOP (1<<12) /* Loop tx and rx */
|
||||
#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
|
||||
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
|
||||
#define UTS_TXFULL (1<<4) /* TxFIFO full */
|
||||
#define UTS_RXFULL (1<<3) /* RxFIFO full */
|
||||
#define UTS_SOFTRST (1<<0) /* Software reset */
|
||||
|
||||
/* We've been assigned a range on the "Low-density serial ports" major */
|
||||
#define SERIAL_IMX_MAJOR 204
|
||||
#define MINOR_START 41
|
||||
|
@ -128,7 +244,10 @@ static void imx_timeout(unsigned long data)
|
|||
static void imx_stop_tx(struct uart_port *port)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
UCR1((u32)sport->port.membase) &= ~UCR1_TXMPTYEN;
|
||||
unsigned long temp;
|
||||
|
||||
temp = readl(sport->port.membase + UCR1);
|
||||
writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -137,7 +256,10 @@ static void imx_stop_tx(struct uart_port *port)
|
|||
static void imx_stop_rx(struct uart_port *port)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
UCR2((u32)sport->port.membase) &= ~UCR2_RXEN;
|
||||
unsigned long temp;
|
||||
|
||||
temp = readl(sport->port.membase + UCR2);
|
||||
writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -154,10 +276,10 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
|
|||
{
|
||||
struct circ_buf *xmit = &sport->port.info->xmit;
|
||||
|
||||
while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) {
|
||||
while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
|
||||
/* send xmit->buf[xmit->tail]
|
||||
* out the port here */
|
||||
URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
|
||||
writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
|
||||
xmit->tail = (xmit->tail + 1) &
|
||||
(UART_XMIT_SIZE - 1);
|
||||
sport->port.icount.tx++;
|
||||
|
@ -175,21 +297,24 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
|
|||
static void imx_start_tx(struct uart_port *port)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
unsigned long temp;
|
||||
|
||||
UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
|
||||
temp = readl(sport->port.membase + UCR1);
|
||||
writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
|
||||
|
||||
imx_transmit_buffer(sport);
|
||||
if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
|
||||
imx_transmit_buffer(sport);
|
||||
}
|
||||
|
||||
static irqreturn_t imx_rtsint(int irq, void *dev_id)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)dev_id;
|
||||
unsigned int val = USR1((u32)sport->port.membase)&USR1_RTSS;
|
||||
unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&sport->port.lock, flags);
|
||||
|
||||
USR1((u32)sport->port.membase) = USR1_RTSD;
|
||||
writel(USR1_RTSD, sport->port.membase + USR1);
|
||||
uart_handle_cts_change(&sport->port, !!val);
|
||||
wake_up_interruptible(&sport->port.info->delta_msr_wait);
|
||||
|
||||
|
@ -207,7 +332,7 @@ static irqreturn_t imx_txint(int irq, void *dev_id)
|
|||
if (sport->port.x_char)
|
||||
{
|
||||
/* Send next char */
|
||||
URTX0((u32)sport->port.membase) = sport->port.x_char;
|
||||
writel(sport->port.x_char, sport->port.membase + URTX0);
|
||||
goto out;
|
||||
}
|
||||
|
||||
|
@ -231,17 +356,18 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
|
|||
struct imx_port *sport = dev_id;
|
||||
unsigned int rx,flg,ignored = 0;
|
||||
struct tty_struct *tty = sport->port.info->tty;
|
||||
unsigned long flags;
|
||||
unsigned long flags, temp;
|
||||
|
||||
rx = URXD0((u32)sport->port.membase);
|
||||
rx = readl(sport->port.membase + URXD0);
|
||||
spin_lock_irqsave(&sport->port.lock,flags);
|
||||
|
||||
do {
|
||||
flg = TTY_NORMAL;
|
||||
sport->port.icount.rx++;
|
||||
|
||||
if( USR2((u32)sport->port.membase) & USR2_BRCD ) {
|
||||
USR2((u32)sport->port.membase) |= USR2_BRCD;
|
||||
temp = readl(sport->port.membase + USR2);
|
||||
if( temp & USR2_BRCD ) {
|
||||
writel(temp | USR2_BRCD, sport->port.membase + USR2);
|
||||
if(uart_handle_break(&sport->port))
|
||||
goto ignore_char;
|
||||
}
|
||||
|
@ -257,7 +383,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
|
|||
tty_insert_flip_char(tty, rx, flg);
|
||||
|
||||
ignore_char:
|
||||
rx = URXD0((u32)sport->port.membase);
|
||||
rx = readl(sport->port.membase + URXD0);
|
||||
} while(rx & URXD_CHARRDY);
|
||||
|
||||
out:
|
||||
|
@ -301,7 +427,7 @@ static unsigned int imx_tx_empty(struct uart_port *port)
|
|||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
|
||||
return USR2((u32)sport->port.membase) & USR2_TXDC ? TIOCSER_TEMT : 0;
|
||||
return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -312,10 +438,10 @@ static unsigned int imx_get_mctrl(struct uart_port *port)
|
|||
struct imx_port *sport = (struct imx_port *)port;
|
||||
unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
|
||||
|
||||
if (USR1((u32)sport->port.membase) & USR1_RTSS)
|
||||
if (readl(sport->port.membase + USR1) & USR1_RTSS)
|
||||
tmp |= TIOCM_CTS;
|
||||
|
||||
if (UCR2((u32)sport->port.membase) & UCR2_CTS)
|
||||
if (readl(sport->port.membase + UCR2) & UCR2_CTS)
|
||||
tmp |= TIOCM_RTS;
|
||||
|
||||
return tmp;
|
||||
|
@ -324,11 +450,14 @@ static unsigned int imx_get_mctrl(struct uart_port *port)
|
|||
static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
unsigned long temp;
|
||||
|
||||
temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
|
||||
|
||||
if (mctrl & TIOCM_RTS)
|
||||
UCR2((u32)sport->port.membase) |= UCR2_CTS;
|
||||
else
|
||||
UCR2((u32)sport->port.membase) &= ~UCR2_CTS;
|
||||
temp |= UCR2_CTS;
|
||||
|
||||
writel(temp, sport->port.membase + UCR2);
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -337,14 +466,16 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|||
static void imx_break_ctl(struct uart_port *port, int break_state)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
unsigned long flags;
|
||||
unsigned long flags, temp;
|
||||
|
||||
spin_lock_irqsave(&sport->port.lock, flags);
|
||||
|
||||
temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
|
||||
|
||||
if ( break_state != 0 )
|
||||
UCR1((u32)sport->port.membase) |= UCR1_SNDBRK;
|
||||
else
|
||||
UCR1((u32)sport->port.membase) &= ~UCR1_SNDBRK;
|
||||
temp |= UCR1_SNDBRK;
|
||||
|
||||
writel(temp, sport->port.membase + UCR1);
|
||||
|
||||
spin_unlock_irqrestore(&sport->port.lock, flags);
|
||||
}
|
||||
|
@ -360,7 +491,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
|
|||
/* set receiver / transmitter trigger level.
|
||||
* RFDIV is set such way to satisfy requested uartclk value
|
||||
*/
|
||||
val = TXTL<<10 | RXTL;
|
||||
val = TXTL << 10 | RXTL;
|
||||
ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
|
||||
|
||||
if(!ufcr_rfdiv)
|
||||
|
@ -373,7 +504,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
|
|||
|
||||
val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
|
||||
|
||||
UFCR((u32)sport->port.membase) = val;
|
||||
writel(val, sport->port.membase + UFCR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -382,14 +513,15 @@ static int imx_startup(struct uart_port *port)
|
|||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
int retval;
|
||||
unsigned long flags;
|
||||
unsigned long flags, temp;
|
||||
|
||||
imx_setup_ufcr(sport, 0);
|
||||
|
||||
/* disable the DREN bit (Data Ready interrupt enable) before
|
||||
* requesting IRQs
|
||||
*/
|
||||
UCR4((u32)sport->port.membase) &= ~UCR4_DREN;
|
||||
temp = readl(sport->port.membase + UCR4);
|
||||
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
|
||||
|
||||
/*
|
||||
* Allocate the IRQ
|
||||
|
@ -411,12 +543,16 @@ static int imx_startup(struct uart_port *port)
|
|||
/*
|
||||
* Finally, clear and enable interrupts
|
||||
*/
|
||||
writel(USR1_RTSD, sport->port.membase + USR1);
|
||||
|
||||
USR1((u32)sport->port.membase) = USR1_RTSD;
|
||||
UCR1((u32)sport->port.membase) |=
|
||||
(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
|
||||
temp = readl(sport->port.membase + UCR1);
|
||||
temp |= (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
|
||||
writel(temp, sport->port.membase + UCR1);
|
||||
|
||||
temp = readl(sport->port.membase + UCR2);
|
||||
temp |= (UCR2_RXEN | UCR2_TXEN);
|
||||
writel(temp, sport->port.membase + UCR2);
|
||||
|
||||
UCR2((u32)sport->port.membase) |= (UCR2_RXEN | UCR2_TXEN);
|
||||
/*
|
||||
* Enable modem status interrupts
|
||||
*/
|
||||
|
@ -437,6 +573,7 @@ error_out1:
|
|||
static void imx_shutdown(struct uart_port *port)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
unsigned long temp;
|
||||
|
||||
/*
|
||||
* Stop our timer.
|
||||
|
@ -454,8 +591,9 @@ static void imx_shutdown(struct uart_port *port)
|
|||
* Disable all interrupts, port and break condition.
|
||||
*/
|
||||
|
||||
UCR1((u32)sport->port.membase) &=
|
||||
~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
|
||||
temp = readl(sport->port.membase + UCR1);
|
||||
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
|
||||
writel(temp, sport->port.membase + UCR1);
|
||||
}
|
||||
|
||||
static void
|
||||
|
@ -548,18 +686,18 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
|
|||
/*
|
||||
* disable interrupts and drain transmitter
|
||||
*/
|
||||
old_ucr1 = UCR1((u32)sport->port.membase);
|
||||
UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
|
||||
old_ucr1 = readl(sport->port.membase + UCR1);
|
||||
writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
|
||||
sport->port.membase + UCR1);
|
||||
|
||||
while ( !(USR2((u32)sport->port.membase) & USR2_TXDC))
|
||||
while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
|
||||
barrier();
|
||||
|
||||
/* then, disable everything */
|
||||
old_txrxen = UCR2((u32)sport->port.membase) & ( UCR2_TXEN | UCR2_RXEN );
|
||||
UCR2((u32)sport->port.membase) &= ~( UCR2_TXEN | UCR2_RXEN);
|
||||
|
||||
/* set the parity, stop bits and data size */
|
||||
UCR2((u32)sport->port.membase) = ucr2;
|
||||
old_txrxen = readl(sport->port.membase + UCR2);
|
||||
writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
|
||||
sport->port.membase + UCR2);
|
||||
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
|
||||
|
||||
/* set the baud rate. We assume uartclk = 16 MHz
|
||||
*
|
||||
|
@ -567,11 +705,13 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
|
|||
* --------- = --------
|
||||
* uartclk UBMR - 1
|
||||
*/
|
||||
UBIR((u32)sport->port.membase) = (baud / 100) - 1;
|
||||
UBMR((u32)sport->port.membase) = 10000 - 1;
|
||||
writel((baud / 100) - 1, sport->port.membase + UBIR);
|
||||
writel(10000 - 1, sport->port.membase + UBMR);
|
||||
|
||||
UCR1((u32)sport->port.membase) = old_ucr1;
|
||||
UCR2((u32)sport->port.membase) |= old_txrxen;
|
||||
writel(old_ucr1, sport->port.membase + UCR1);
|
||||
|
||||
/* set the parity, stop bits and data size */
|
||||
writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
|
||||
|
||||
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
|
||||
imx_enable_ms(&sport->port);
|
||||
|
@ -730,9 +870,11 @@ static void __init imx_init_ports(void)
|
|||
static void imx_console_putchar(struct uart_port *port, int ch)
|
||||
{
|
||||
struct imx_port *sport = (struct imx_port *)port;
|
||||
while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
|
||||
|
||||
while (readl(sport->port.membase + UTS) & UTS_TXFULL)
|
||||
barrier();
|
||||
URTX0((u32)sport->port.membase) = ch;
|
||||
|
||||
writel(ch, sport->port.membase + URTX0);
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -747,13 +889,14 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
|
|||
/*
|
||||
* First, save UCR1/2 and then disable interrupts
|
||||
*/
|
||||
old_ucr1 = UCR1((u32)sport->port.membase);
|
||||
old_ucr2 = UCR2((u32)sport->port.membase);
|
||||
old_ucr1 = readl(sport->port.membase + UCR1);
|
||||
old_ucr2 = readl(sport->port.membase + UCR2);
|
||||
|
||||
UCR1((u32)sport->port.membase) =
|
||||
(old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN)
|
||||
& ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
|
||||
UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN;
|
||||
writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) &
|
||||
~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
|
||||
sport->port.membase + UCR1);
|
||||
|
||||
writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
|
||||
|
||||
uart_console_write(&sport->port, s, count, imx_console_putchar);
|
||||
|
||||
|
@ -761,10 +904,10 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
|
|||
* Finally, wait for transmitter to become empty
|
||||
* and restore UCR1/2
|
||||
*/
|
||||
while (!(USR2((u32)sport->port.membase) & USR2_TXDC));
|
||||
while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
|
||||
|
||||
UCR1((u32)sport->port.membase) = old_ucr1;
|
||||
UCR2((u32)sport->port.membase) = old_ucr2;
|
||||
writel(old_ucr1, sport->port.membase + UCR1);
|
||||
writel(old_ucr2, sport->port.membase + UCR2);
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -776,13 +919,13 @@ imx_console_get_options(struct imx_port *sport, int *baud,
|
|||
int *parity, int *bits)
|
||||
{
|
||||
|
||||
if ( UCR1((u32)sport->port.membase) | UCR1_UARTEN ) {
|
||||
if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
|
||||
/* ok, the port was enabled */
|
||||
unsigned int ucr2, ubir,ubmr, uartclk;
|
||||
unsigned int baud_raw;
|
||||
unsigned int ucfr_rfdiv;
|
||||
|
||||
ucr2 = UCR2((u32)sport->port.membase);
|
||||
ucr2 = readl(sport->port.membase + UCR2);
|
||||
|
||||
*parity = 'n';
|
||||
if (ucr2 & UCR2_PREN) {
|
||||
|
@ -797,11 +940,10 @@ imx_console_get_options(struct imx_port *sport, int *baud,
|
|||
else
|
||||
*bits = 7;
|
||||
|
||||
ubir = UBIR((u32)sport->port.membase) & 0xffff;
|
||||
ubmr = UBMR((u32)sport->port.membase) & 0xffff;
|
||||
ubir = readl(sport->port.membase + UBIR) & 0xffff;
|
||||
ubmr = readl(sport->port.membase + UBMR) & 0xffff;
|
||||
|
||||
|
||||
ucfr_rfdiv = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) >> 7;
|
||||
ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
|
||||
if (ucfr_rfdiv == 6)
|
||||
ucfr_rfdiv = 7;
|
||||
else
|
||||
|
|
|
@ -477,122 +477,4 @@
|
|||
#define LCDISR_EOF (1<<1)
|
||||
#define LCDISR_BOF (1<<0)
|
||||
|
||||
/*
|
||||
* UART Module. Takes the UART base address as argument
|
||||
*/
|
||||
#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */
|
||||
#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */
|
||||
#define UCR1(x) __REG( 0x80 + (x)) /* Control Register 1 */
|
||||
#define UCR2(x) __REG( 0x84 + (x)) /* Control Register 2 */
|
||||
#define UCR3(x) __REG( 0x88 + (x)) /* Control Register 3 */
|
||||
#define UCR4(x) __REG( 0x8c + (x)) /* Control Register 4 */
|
||||
#define UFCR(x) __REG( 0x90 + (x)) /* FIFO Control Register */
|
||||
#define USR1(x) __REG( 0x94 + (x)) /* Status Register 1 */
|
||||
#define USR2(x) __REG( 0x98 + (x)) /* Status Register 2 */
|
||||
#define UESC(x) __REG( 0x9c + (x)) /* Escape Character Register */
|
||||
#define UTIM(x) __REG( 0xa0 + (x)) /* Escape Timer Register */
|
||||
#define UBIR(x) __REG( 0xa4 + (x)) /* BRM Incremental Register */
|
||||
#define UBMR(x) __REG( 0xa8 + (x)) /* BRM Modulator Register */
|
||||
#define UBRC(x) __REG( 0xac + (x)) /* Baud Rate Count Register */
|
||||
#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */
|
||||
#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */
|
||||
#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */
|
||||
#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */
|
||||
#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */
|
||||
#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */
|
||||
#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */
|
||||
#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */
|
||||
#define UTS(x) __REG( 0xd0 + (x)) /* UART Test Register */
|
||||
|
||||
/* UART Control Register Bit Fields.*/
|
||||
#define URXD_CHARRDY (1<<15)
|
||||
#define URXD_ERR (1<<14)
|
||||
#define URXD_OVRRUN (1<<13)
|
||||
#define URXD_FRMERR (1<<12)
|
||||
#define URXD_BRK (1<<11)
|
||||
#define URXD_PRERR (1<<10)
|
||||
#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
|
||||
#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
|
||||
#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
|
||||
#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
|
||||
#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
|
||||
#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
|
||||
#define UCR1_IREN (1<<7) /* Infrared interface enable */
|
||||
#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
|
||||
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
|
||||
#define UCR1_SNDBRK (1<<4) /* Send break */
|
||||
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
|
||||
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
|
||||
#define UCR1_DOZE (1<<1) /* Doze */
|
||||
#define UCR1_UARTEN (1<<0) /* UART enabled */
|
||||
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
|
||||
#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
|
||||
#define UCR2_CTSC (1<<13) /* CTS pin control */
|
||||
#define UCR2_CTS (1<<12) /* Clear to send */
|
||||
#define UCR2_ESCEN (1<<11) /* Escape enable */
|
||||
#define UCR2_PREN (1<<8) /* Parity enable */
|
||||
#define UCR2_PROE (1<<7) /* Parity odd/even */
|
||||
#define UCR2_STPB (1<<6) /* Stop */
|
||||
#define UCR2_WS (1<<5) /* Word size */
|
||||
#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
|
||||
#define UCR2_TXEN (1<<2) /* Transmitter enabled */
|
||||
#define UCR2_RXEN (1<<1) /* Receiver enabled */
|
||||
#define UCR2_SRST (1<<0) /* SW reset */
|
||||
#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
|
||||
#define UCR3_PARERREN (1<<12) /* Parity enable */
|
||||
#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
|
||||
#define UCR3_DSR (1<<10) /* Data set ready */
|
||||
#define UCR3_DCD (1<<9) /* Data carrier detect */
|
||||
#define UCR3_RI (1<<8) /* Ring indicator */
|
||||
#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
|
||||
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
|
||||
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
|
||||
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
|
||||
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
|
||||
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
|
||||
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
|
||||
#define UCR3_BPEN (1<<0) /* Preset registers enable */
|
||||
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
|
||||
#define UCR4_INVR (1<<9) /* Inverted infrared reception */
|
||||
#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
|
||||
#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
|
||||
#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
|
||||
#define UCR4_IRSC (1<<5) /* IR special case */
|
||||
#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
|
||||
#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
|
||||
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
|
||||
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
|
||||
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
|
||||
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
|
||||
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
|
||||
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
|
||||
#define USR1_RTSS (1<<14) /* RTS pin status */
|
||||
#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
|
||||
#define USR1_RTSD (1<<12) /* RTS delta */
|
||||
#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
|
||||
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
|
||||
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
|
||||
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
|
||||
#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
|
||||
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
|
||||
#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
|
||||
#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
|
||||
#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
|
||||
#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
|
||||
#define USR2_IDLE (1<<12) /* Idle condition */
|
||||
#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
|
||||
#define USR2_WAKE (1<<7) /* Wake */
|
||||
#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
|
||||
#define USR2_TXDC (1<<3) /* Transmitter complete */
|
||||
#define USR2_BRCD (1<<2) /* Break condition */
|
||||
#define USR2_ORE (1<<1) /* Overrun error */
|
||||
#define USR2_RDR (1<<0) /* Recv data ready */
|
||||
#define UTS_FRCPERR (1<<13) /* Force parity error */
|
||||
#define UTS_LOOP (1<<12) /* Loop tx and rx */
|
||||
#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
|
||||
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
|
||||
#define UTS_TXFULL (1<<4) /* TxFIFO full */
|
||||
#define UTS_RXFULL (1<<3) /* RxFIFO full */
|
||||
#define UTS_SOFTRST (1<<0) /* Software reset */
|
||||
|
||||
#endif // _IMX_REGS_H
|
||||
|
|
Loading…
Reference in a new issue