redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

gpio: xlp: GPIO controller for Netlogic XLP SoCs 

Add GPIO controller driver for Netlogic XLP MIPS64 SOCs.

This driver is instantiated by device tree and supports interrupts
for GPIOs.

Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
steinar/wifi_calib_4_9_kernel
Kamlakant Patel 2015-04-28 20:10:45 +05:30 committed by Linus Walleij
parent a605c668cc
commit ff71880006
3 changed files with 437 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/gpio/Kconfig
View File

@ -496,6 +496,17 @@ config GPIO_XILINX
help
Say yes here to support the Xilinx FPGA GPIO device
config GPIO_XLP
tristate "Netlogic XLP GPIO support"
depends on CPU_XLP
select GPIOLIB_IRQCHIP
help
This driver provides support for GPIO interface on Netlogic XLP MIPS64
SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
XLP9XX and XLP5XX.
If unsure, say N.
config GPIO_XTENSA
bool "Xtensa GPIO32 support"
depends on XTENSA

1
drivers/gpio/Makefile
View File

@ -110,6 +110,7 @@ obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
obj-$(CONFIG_GPIO_XGENE_SB) += gpio-xgene-sb.o
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
obj-$(CONFIG_GPIO_XLP) += gpio-xlp.o
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o

425
drivers/gpio/gpio-xlp.c 100644
View File

@ -0,0 +1,425 @@
/*
* Copyright (C) 2003-2015 Broadcom Corporation
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
/*
* XLP GPIO has multiple 32 bit registers for each feature where each register
* controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
* require 3 32-bit registers for each feature.
* Here we only define offset of the first register for each feature. Offset of
* the registers for pins greater than 32 can be calculated as following(Use
* GPIO_INT_STAT as example):
*
* offset = (gpio / XLP_GPIO_REGSZ) * 4;
* reg_addr = addr + offset;
*
* where addr is base address of the that feature register and gpio is the pin.
*/
#define GPIO_OUTPUT_EN 0x00
#define GPIO_PADDRV 0x08
#define GPIO_INT_EN00 0x18
#define GPIO_INT_EN10 0x20
#define GPIO_INT_EN20 0x28
#define GPIO_INT_EN30 0x30
#define GPIO_INT_POL 0x38
#define GPIO_INT_TYPE 0x40
#define GPIO_INT_STAT 0x48
#define GPIO_9XX_BYTESWAP 0X00
#define GPIO_9XX_CTRL 0X04
#define GPIO_9XX_OUTPUT_EN 0x14
#define GPIO_9XX_PADDRV 0x24
/*
* Only for 4 interrupt enable reg are defined for now,
* total reg available are 12.
*/
#define GPIO_9XX_INT_EN00 0x44
#define GPIO_9XX_INT_EN10 0x54
#define GPIO_9XX_INT_EN20 0x64
#define GPIO_9XX_INT_EN30 0x74
#define GPIO_9XX_INT_POL 0x104
#define GPIO_9XX_INT_TYPE 0x114
#define GPIO_9XX_INT_STAT 0x124
#define GPIO_3XX_INT_EN00 0x18
#define GPIO_3XX_INT_EN10 0x20
#define GPIO_3XX_INT_EN20 0x28
#define GPIO_3XX_INT_EN30 0x30
#define GPIO_3XX_INT_POL 0x78
#define GPIO_3XX_INT_TYPE 0x80
#define GPIO_3XX_INT_STAT 0x88
/* Interrupt type register mask */
#define XLP_GPIO_IRQ_TYPE_LVL 0x0
#define XLP_GPIO_IRQ_TYPE_EDGE 0x1
/* Interrupt polarity register mask */
#define XLP_GPIO_IRQ_POL_HIGH 0x0
#define XLP_GPIO_IRQ_POL_LOW 0x1
#define XLP_GPIO_REGSZ 32
#define XLP_GPIO_IRQ_BASE 768
#define XLP_MAX_NR_GPIO 96
/* XLP variants supported by this driver */
enum {
XLP_GPIO_VARIANT_XLP832 = 1,
XLP_GPIO_VARIANT_XLP316,
XLP_GPIO_VARIANT_XLP208,
XLP_GPIO_VARIANT_XLP980,
XLP_GPIO_VARIANT_XLP532
};
struct xlp_gpio_priv {
struct gpio_chip chip;
DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
void __iomem *gpio_intr_en; /* pointer to first intr enable reg */
void __iomem *gpio_intr_stat; /* pointer to first intr status reg */
void __iomem *gpio_intr_type; /* pointer to first intr type reg */
void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */
void __iomem *gpio_out_en; /* pointer to first output enable reg */
void __iomem *gpio_paddrv; /* pointer to first pad drive reg */
spinlock_t lock;
};
static struct xlp_gpio_priv *gpio_chip_to_xlp_priv(struct gpio_chip *gc)
{
return container_of(gc, struct xlp_gpio_priv, chip);
}
static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
{
u32 pos, regset;
pos = gpio % XLP_GPIO_REGSZ;
regset = (gpio / XLP_GPIO_REGSZ) * 4;
return !!(readl(addr + regset) & BIT(pos));
}
static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
{
u32 value, pos, regset;
pos = gpio % XLP_GPIO_REGSZ;
regset = (gpio / XLP_GPIO_REGSZ) * 4;
value = readl(addr + regset);
if (state)
value |= BIT(pos);
else
value &= ~BIT(pos);
writel(value, addr + regset);
}
static void xlp_gpio_irq_disable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
__clear_bit(d->hwirq, priv->gpio_enabled_mask);
spin_unlock_irqrestore(&priv->lock, flags);
}
static void xlp_gpio_irq_mask_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
__clear_bit(d->hwirq, priv->gpio_enabled_mask);
spin_unlock_irqrestore(&priv->lock, flags);
}
static void xlp_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
__set_bit(d->hwirq, priv->gpio_enabled_mask);
spin_unlock_irqrestore(&priv->lock, flags);
}
static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
int pol, irq_type;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
pol = XLP_GPIO_IRQ_POL_HIGH;
break;
case IRQ_TYPE_EDGE_FALLING:
irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
pol = XLP_GPIO_IRQ_POL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
irq_type = XLP_GPIO_IRQ_TYPE_LVL;
pol = XLP_GPIO_IRQ_POL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
irq_type = XLP_GPIO_IRQ_TYPE_LVL;
pol = XLP_GPIO_IRQ_POL_LOW;
break;
default:
return -EINVAL;
}
xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
return 0;
}
static struct irq_chip xlp_gpio_irq_chip = {
.name = "XLP-GPIO",
.irq_mask_ack = xlp_gpio_irq_mask_ack,
.irq_disable = xlp_gpio_irq_disable,
.irq_set_type = xlp_gpio_set_irq_type,
.irq_unmask = xlp_gpio_irq_unmask,
.flags = IRQCHIP_ONESHOT_SAFE,
};
static irqreturn_t xlp_gpio_generic_handler(int irq, void *data)
{
struct xlp_gpio_priv *priv = data;
int gpio, regoff;
u32 gpio_stat;
regoff = -1;
gpio_stat = 0;
for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
if (regoff != gpio / XLP_GPIO_REGSZ) {
regoff = gpio / XLP_GPIO_REGSZ;
gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
}
if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
generic_handle_irq(irq_find_mapping(
priv->chip.irqdomain, gpio));
}
return IRQ_HANDLED;
}
static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
return 0;
}
static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
return 0;
}
static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
}
static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
}
static const struct of_device_id xlp_gpio_of_ids[] = {
{
.compatible = "netlogic,xlp832-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP832,
},
{
.compatible = "netlogic,xlp316-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP316,
},
{
.compatible = "netlogic,xlp208-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP208,
},
{
.compatible = "netlogic,xlp980-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP980,
},
{
.compatible = "netlogic,xlp532-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP532,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
static int xlp_gpio_probe(struct platform_device *pdev)
{
struct gpio_chip *gc;
struct resource *iores;
struct xlp_gpio_priv *priv;
const struct of_device_id *of_id;
void __iomem *gpio_base;
int irq_base, irq, err;
int ngpio;
u32 soc_type;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iores)
return -ENODEV;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
gpio_base = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(gpio_base))
return PTR_ERR(gpio_base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev);
if (!of_id) {
dev_err(&pdev->dev, "Failed to get soc type!\n");
return -ENODEV;
}
soc_type = (uintptr_t) of_id->data;
switch (soc_type) {
case XLP_GPIO_VARIANT_XLP832:
priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
ngpio = 41;
break;
case XLP_GPIO_VARIANT_XLP208:
case XLP_GPIO_VARIANT_XLP316:
priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
break;
case XLP_GPIO_VARIANT_XLP980:
case XLP_GPIO_VARIANT_XLP532:
priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
ngpio = (soc_type == XLP_GPIO_VARIANT_XLP980) ? 66 : 67;
break;
default:
dev_err(&pdev->dev, "Unknown Processor type!\n");
return -ENODEV;
}
bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
gc = &priv->chip;
gc->base = 0;
gc->dev = &pdev->dev;
gc->ngpio = ngpio;
gc->of_node = pdev->dev.of_node;
gc->direction_output = xlp_gpio_dir_output;
gc->direction_input = xlp_gpio_dir_input;
gc->set = xlp_gpio_set;
gc->get = xlp_gpio_get;
spin_lock_init(&priv->lock);
err = devm_request_irq(&pdev->dev, irq, xlp_gpio_generic_handler,
IRQ_TYPE_NONE, pdev->name, priv);
if (err)
return err;
irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0);
if (irq_base < 0) {
dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
return err;
}
err = gpiochip_add(gc);
if (err < 0)
goto out_free_desc;
err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base,
handle_level_irq, IRQ_TYPE_NONE);
if (err) {
dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n");
goto out_gpio_remove;
}
dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
return 0;
out_gpio_remove:
gpiochip_remove(gc);
out_free_desc:
irq_free_descs(irq_base, gc->ngpio);
return err;
}
static struct platform_driver xlp_gpio_driver = {
.driver = {
.name = "xlp-gpio",
.of_match_table = xlp_gpio_of_ids,
},
.probe = xlp_gpio_probe,
};
module_platform_driver(xlp_gpio_driver);
MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
MODULE_LICENSE("GPL v2");