redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

[ARM] Kirkwood: add support for PCIe1

Browse source 
This patch extends the kirkwood's PCIe support up to 2 controllers as in the 6282 devices.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
This commit is contained in:
Saeed Bishara 2010-06-08 14:21:34 +03:00 committed by Nicolas Pitre
parent 35fe2fc44a
commit ffd58bd2e4
15 changed files with 226 additions and 79 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
arch/arm/mach-kirkwood/addr-map.c
View file

@ -31,6 +31,8 @@
#define ATTR_DEV_CS0 0x3e
#define ATTR_PCIE_IO 0xe0
#define ATTR_PCIE_MEM 0xe8
#define ATTR_PCIE1_IO 0xd0
#define ATTR_PCIE1_MEM 0xd8
#define ATTR_SRAM 0x01
/*
@ -106,17 +108,21 @@ void __init kirkwood_setup_cpu_mbus(void)
TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
/*
* Setup window for NAND controller.
*/
setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
/*
* Setup window for SRAM.
*/
setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
TARGET_SRAM, ATTR_SRAM, -1);
/*

21
arch/arm/mach-kirkwood/common.c
View file

@ -43,6 +43,11 @@ static struct map_desc kirkwood_io_desc[] __initdata = {
.pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
.length = KIRKWOOD_PCIE_IO_SIZE,
.type = MT_DEVICE,
}, {
.virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
.length = KIRKWOOD_PCIE1_IO_SIZE,
.type = MT_DEVICE,
}, {
.virtual = KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
@ -960,12 +965,14 @@ void __init kirkwood_init(void)
static int __init kirkwood_clock_gate(void)
{
unsigned int curr = readl(CLOCK_GATING_CTRL);
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
printk(KERN_DEBUG "Gating clock of unused units\n");
printk(KERN_DEBUG "before: 0x%08x\n", curr);
/* Make sure those units are accessible */
writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
/* For SATA: first shutdown the phy */
if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
@ -990,6 +997,18 @@ static int __init kirkwood_clock_gate(void)
writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
}
/* For PCIe 1: first shutdown the phy */
if (dev == MV88F6282_DEV_ID) {
if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
while (1)
if (readl(PCIE1_STATUS) & 0x1)
break;
writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
}
} else /* keep this bit set for devices that don't have PCIe1 */
kirkwood_clk_ctrl |= CGC_PEX1;
/* Now gate clock the required units */
writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));

5
arch/arm/mach-kirkwood/common.h
View file

@ -18,6 +18,9 @@ struct mvsdio_platform_data;
struct mtd_partition;
struct mtd_info;
#define KW_PCIE0 (1 << 0)
#define KW_PCIE1 (1 << 1)
/*
* Basic Kirkwood init functions used early by machine-setup.
*/
@ -34,7 +37,7 @@ void kirkwood_ehci_init(void);
void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
void kirkwood_pcie_init(void);
void kirkwood_pcie_init(unsigned int portmask);
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
void kirkwood_spi_init(void);

10
arch/arm/mach-kirkwood/db88f6281-bp-setup.c
View file

@ -82,9 +82,15 @@ static void __init db88f6281_init(void)
static int __init db88f6281_pci_init(void)
{
if (machine_is_db88f6281_bp())
kirkwood_pcie_init();
if (machine_is_db88f6281_bp()) {
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
else
kirkwood_pcie_init(KW_PCIE0);
}
return 0;
}
subsys_initcall(db88f6281_pci_init);

3
arch/arm/mach-kirkwood/include/mach/bridge-regs.h
View file

@ -59,8 +59,9 @@
#define CGC_SATA1 (1 << 15)
#define CGC_XOR1 (1 << 16)
#define CGC_CRYPTO (1 << 17)
#define CGC_PEX1 (1 << 18)
#define CGC_GE1 (1 << 19)
#define CGC_TDM (1 << 20)
#define CGC_RESERVED ((1 << 18) | (0x6 << 21))
#define CGC_RESERVED (0x6 << 21)
#endif

1
arch/arm/mach-kirkwood/include/mach/irqs.h
View file

@ -23,6 +23,7 @@
#define IRQ_KIRKWOOD_XOR_10 7
#define IRQ_KIRKWOOD_XOR_11 8
#define IRQ_KIRKWOOD_PCIE 9
#define IRQ_KIRKWOOD_PCIE1 10
#define IRQ_KIRKWOOD_GE00_SUM 11
#define IRQ_KIRKWOOD_GE01_SUM 15
#define IRQ_KIRKWOOD_USB 19

35
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View file

@ -16,36 +16,48 @@
* Marvell Kirkwood address maps.
*
* phys
* e0000000 PCIe Memory space
* e0000000 PCIe #0 Memory space
* e8000000 PCIe #1 Memory space
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f3000000 NAND controller address window
* f4000000 Security Accelerator SRAM
* f2000000 PCIe #0 I/O space
* f3000000 PCIe #1 I/O space
* f4000000 NAND controller address window
* f5000000 Security Accelerator SRAM
*
* virt phys size
* fee00000 f1000000 1M on-chip peripheral registers
* fef00000 f2000000 1M PCIe I/O space
* fed00000 f1000000 1M on-chip peripheral registers
* fee00000 f2000000 1M PCIe #0 I/O space
* fef00000 f3000000 1M PCIe #1 I/O space
*/
#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000
#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
#define KIRKWOOD_SRAM_SIZE SZ_2K
#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000
#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000
#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
/*
* Register Map
*/
@ -72,6 +84,9 @@
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000)
#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70)
#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)

2
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
View file

@ -155,7 +155,7 @@ static void __init mv88f6281gtw_ge_init(void)
static int __init mv88f6281gtw_ge_pci_init(void)
{
if (machine_is_mv88f6281gtw_ge())
kirkwood_pcie_init();
kirkwood_pcie_init(KW_PCIE0);
return 0;
}

2
arch/arm/mach-kirkwood/openrd-setup.c
View file

@ -93,7 +93,7 @@ static int __init openrd_pci_init(void)
if (machine_is_openrd_base() ||
machine_is_openrd_client() ||
machine_is_openrd_ultimate())
kirkwood_pcie_init();
kirkwood_pcie_init(KW_PCIE0);
return 0;
}

202
arch/arm/mach-kirkwood/pcie.c
View file

@ -18,29 +18,43 @@
#include <mach/bridge-regs.h>
#include "common.h"
#define PCIE_BASE ((void __iomem *)PCIE_VIRT_BASE)
void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
{
*dev = orion_pcie_dev_id(PCIE_BASE);
*rev = orion_pcie_rev(PCIE_BASE);
*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
}
static int pcie_valid_config(int bus, int dev)
struct pcie_port {
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
int irq;
struct resource res[2];
};
static int pcie_port_map[2];
static int num_pcie_ports;
static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
{
struct pci_sys_data *sys = bus->sysdata;
return sys->private_data;
}
static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
{
/*
* Don't go out when trying to access --
* 1. nonexisting device on local bus
* 2. where there's no device connected (no link)
*/
if (bus == 0 && dev == 0)
if (bus == pp->root_bus_nr && dev == 0)
return 1;
if (!orion_pcie_link_up(PCIE_BASE))
if (!orion_pcie_link_up(pp->base))
return 0;
if (bus == 0 && dev != 1)
if (bus == pp->root_bus_nr && dev != 1)
return 0;
return 1;
@ -52,22 +66,22 @@ static int pcie_valid_config(int bus, int dev)
* and then reading the PCIE_CONF_DATA register. Need to make sure these
* transactions are atomic.
*/
static DEFINE_SPINLOCK(kirkwood_pcie_lock);
static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = bus_to_port(bus);
unsigned long flags;
int ret;
if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
spin_lock_irqsave(&kirkwood_pcie_lock, flags);
ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
@ -75,15 +89,16 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = bus_to_port(bus);
unsigned long flags;
int ret;
if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&kirkwood_pcie_lock, flags);
ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
@ -93,50 +108,112 @@ static struct pci_ops pcie_ops = {
.write = pcie_wr_conf,
};
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
static int __init pcie0_ioresources_setup(struct pci_sys_data *sys)
{
struct resource *res;
extern unsigned int kirkwood_clk_ctrl;
/*
* Generic PCIe unit setup.
*/
orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
/*
* Request resources.
*/
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("pcie_setup unable to alloc resources");
struct pcie_port *pp = (struct pcie_port *)sys->private_data;
/*
* IORESOURCE_IO
*/
res[0].name = "PCIe I/O Space";
res[0].flags = IORESOURCE_IO;
res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
if (request_resource(&ioport_resource, &res[0]))
panic("Request PCIe IO resource failed\n");
sys->resource[0] = &res[0];
pp->res[0].name = "PCIe 0 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
if (request_resource(&ioport_resource, &pp->res[0]))
panic("Request PCIe 0 IO resource failed\n");
sys->resource[0] = &pp->res[0];
/*
* IORESOURCE_MEM
*/
res[1].name = "PCIe Memory Space";
res[1].flags = IORESOURCE_MEM;
res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
if (request_resource(&iomem_resource, &res[1]))
panic("Request PCIe Memory resource failed\n");
sys->resource[1] = &res[1];
pp->res[1].name = "PCIe 0 MEM";
pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
pp->res[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe 0 Memory resource failed\n");
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
sys->io_offset = 0;
kirkwood_clk_ctrl |= CGC_PEX0;
return 1;
}
static int __init pcie1_ioresources_setup(struct pci_sys_data *sys)
{
struct pcie_port *pp = (struct pcie_port *)sys->private_data;
/*
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 1 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
if (request_resource(&ioport_resource, &pp->res[0]))
panic("Request PCIe 1 IO resource failed\n");
sys->resource[0] = &pp->res[0];
/*
* IORESOURCE_MEM
*/
pp->res[1].name = "PCIe 1 MEM";
pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
pp->res[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe 1 Memory resource failed\n");
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
sys->io_offset = 0;
return 1;
}
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
extern unsigned int kirkwood_clk_ctrl;
struct pcie_port *pp;
int index;
if (nr >= num_pcie_ports)
return 0;
index = pcie_port_map[nr];
printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
panic("PCIe: failed to allocate pcie_port data");
sys->private_data = pp;
pp->root_bus_nr = sys->busnr;
spin_lock_init(&pp->conf_lock);
switch (index) {
case 0:
pp->base = (void __iomem *)PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
kirkwood_clk_ctrl |= CGC_PEX0;
pcie0_ioresources_setup(sys);
break;
case 1:
pp->base = (void __iomem *)PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
kirkwood_clk_ctrl |= CGC_PEX1;
pcie1_ioresources_setup(sys);
break;
default:
panic("PCIe setup: invalid controller");
}
/*
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
return 1;
}
@ -163,7 +240,7 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
if (nr == 0) {
if (nr < num_pcie_ports) {
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
} else {
bus = NULL;
@ -175,18 +252,37 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return IRQ_KIRKWOOD_PCIE;
struct pcie_port *pp = bus_to_port(dev->bus);
return pp->irq;
}
static struct hw_pci kirkwood_pci __initdata = {
.nr_controllers = 1,
.swizzle = pci_std_swizzle,
.setup = kirkwood_pcie_setup,
.scan = kirkwood_pcie_scan_bus,
.map_irq = kirkwood_pcie_map_irq,
};
void __init kirkwood_pcie_init(void)
static void __init add_pcie_port(int index, unsigned long base)
{
printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
if (orion_pcie_link_up((void __iomem *)base)) {
printk(KERN_INFO "link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
printk(KERN_INFO "link down, ignoring\n");
}
void __init kirkwood_pcie_init(unsigned int portmask)
{
if (portmask & KW_PCIE0)
add_pcie_port(0, PCIE_VIRT_BASE);
if (portmask & KW_PCIE1)
add_pcie_port(1, PCIE1_VIRT_BASE);
kirkwood_pci.nr_controllers = num_pcie_ports;
pci_common_init(&kirkwood_pci);
}

2
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
View file

@ -71,7 +71,7 @@ static void __init rd88f6192_init(void)
static int __init rd88f6192_pci_init(void)
{
if (machine_is_rd88f6192_nas())
kirkwood_pcie_init();
kirkwood_pcie_init(KW_PCIE0);
return 0;
}

2
arch/arm/mach-kirkwood/rd88f6281-setup.c
View file

@ -107,7 +107,7 @@ static void __init rd88f6281_init(void)
static int __init rd88f6281_pci_init(void)
{
if (machine_is_rd88f6281())
kirkwood_pcie_init();
kirkwood_pcie_init(KW_PCIE0);
return 0;
}

2
arch/arm/mach-kirkwood/t5325-setup.c
View file

@ -176,7 +176,7 @@ static void __init hp_t5325_init(void)
static int __init hp_t5325_pci_init(void)
{
if (machine_is_t5325())
kirkwood_pcie_init();
kirkwood_pcie_init(KW_PCIE0);
return 0;
}

6
arch/arm/mach-kirkwood/ts219-setup.c
View file

@ -111,10 +111,10 @@ static void __init qnap_ts219_init(void)
static int __init ts219_pci_init(void)
{
if (machine_is_ts219())
kirkwood_pcie_init();
if (machine_is_ts219())
kirkwood_pcie_init(KW_PCIE0);
return 0;
return 0;
}
subsys_initcall(ts219_pci_init);

2
arch/arm/mach-kirkwood/ts41x-setup.c
View file

@ -141,7 +141,7 @@ static void __init qnap_ts41x_init(void)
static int __init ts41x_pci_init(void)
{
if (machine_is_ts41x())
kirkwood_pcie_init();
kirkwood_pcie_init(KW_PCIE0);
return 0;
}