ARM OMAP3: Initial support for Nokia RX-51, v3
Adds board files and related headers for Nokia RX-51 Internet Tablet. This patch has been updated with some clean-up patches posted earlier to linux-omap list. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
6fdc29e262
commit
ffe7f95bb1
1821
arch/arm/configs/rx51_defconfig
Normal file
1821
arch/arm/configs/rx51_defconfig
Normal file
File diff suppressed because it is too large
Load diff
|
@ -63,3 +63,7 @@ config MACH_OMAP3_PANDORA
|
|||
config MACH_OMAP_3430SDP
|
||||
bool "OMAP 3430 SDP board"
|
||||
depends on ARCH_OMAP3 && ARCH_OMAP34XX
|
||||
|
||||
config MACH_NOKIA_RX51
|
||||
bool "Nokia RX-51 board"
|
||||
depends on ARCH_OMAP3 && ARCH_OMAP34XX
|
||||
|
|
|
@ -41,6 +41,8 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
|
|||
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
|
||||
mmc-twl4030.o
|
||||
|
||||
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
||||
board-rx51-peripherals.o \
|
||||
# Platform specific device init code
|
||||
ifeq ($(CONFIG_USB_MUSB_SOC),y)
|
||||
obj-y += usb-musb.o
|
||||
|
|
419
arch/arm/mach-omap2/board-rx51-peripherals.c
Normal file
419
arch/arm/mach-omap2/board-rx51-peripherals.c
Normal file
|
@ -0,0 +1,419 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-omap2/board-rx51-flash.c
|
||||
*
|
||||
* Copyright (C) 2008-2009 Nokia
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c/twl4030.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <mach/mcspi.h>
|
||||
#include <mach/mux.h>
|
||||
#include <mach/board.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/dma.h>
|
||||
#include <mach/gpmc.h>
|
||||
#include <mach/keypad.h>
|
||||
|
||||
#include "mmc-twl4030.h"
|
||||
|
||||
|
||||
#define SMC91X_CS 1
|
||||
#define SMC91X_GPIO_IRQ 54
|
||||
#define SMC91X_GPIO_RESET 164
|
||||
#define SMC91X_GPIO_PWRDWN 86
|
||||
|
||||
static struct resource rx51_smc91x_resources[] = {
|
||||
[0] = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device rx51_smc91x_device = {
|
||||
.name = "smc91x",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(rx51_smc91x_resources),
|
||||
.resource = rx51_smc91x_resources,
|
||||
};
|
||||
|
||||
static int rx51_keymap[] = {
|
||||
KEY(0, 0, KEY_Q),
|
||||
KEY(0, 1, KEY_W),
|
||||
KEY(0, 2, KEY_E),
|
||||
KEY(0, 3, KEY_R),
|
||||
KEY(0, 4, KEY_T),
|
||||
KEY(0, 5, KEY_Y),
|
||||
KEY(0, 6, KEY_U),
|
||||
KEY(0, 7, KEY_I),
|
||||
KEY(1, 0, KEY_O),
|
||||
KEY(1, 1, KEY_D),
|
||||
KEY(1, 2, KEY_DOT),
|
||||
KEY(1, 3, KEY_V),
|
||||
KEY(1, 4, KEY_DOWN),
|
||||
KEY(2, 0, KEY_P),
|
||||
KEY(2, 1, KEY_F),
|
||||
KEY(2, 2, KEY_UP),
|
||||
KEY(2, 3, KEY_B),
|
||||
KEY(2, 4, KEY_RIGHT),
|
||||
KEY(3, 0, KEY_COMMA),
|
||||
KEY(3, 1, KEY_G),
|
||||
KEY(3, 2, KEY_ENTER),
|
||||
KEY(3, 3, KEY_N),
|
||||
KEY(4, 0, KEY_BACKSPACE),
|
||||
KEY(4, 1, KEY_H),
|
||||
KEY(4, 3, KEY_M),
|
||||
KEY(4, 4, KEY_LEFTCTRL),
|
||||
KEY(5, 1, KEY_J),
|
||||
KEY(5, 2, KEY_Z),
|
||||
KEY(5, 3, KEY_SPACE),
|
||||
KEY(5, 4, KEY_LEFTSHIFT),
|
||||
KEY(6, 0, KEY_A),
|
||||
KEY(6, 1, KEY_K),
|
||||
KEY(6, 2, KEY_X),
|
||||
KEY(6, 3, KEY_SPACE),
|
||||
KEY(6, 4, KEY_FN),
|
||||
KEY(7, 0, KEY_S),
|
||||
KEY(7, 1, KEY_L),
|
||||
KEY(7, 2, KEY_C),
|
||||
KEY(7, 3, KEY_LEFT),
|
||||
KEY(0xff, 0, KEY_F6),
|
||||
KEY(0xff, 1, KEY_F7),
|
||||
KEY(0xff, 2, KEY_F8),
|
||||
KEY(0xff, 4, KEY_F9),
|
||||
KEY(0xff, 5, KEY_F10),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data rx51_kp_data = {
|
||||
.rows = 8,
|
||||
.cols = 8,
|
||||
.keymap = rx51_keymap,
|
||||
.keymapsize = ARRAY_SIZE(rx51_keymap),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
static struct platform_device *rx51_peripherals_devices[] = {
|
||||
&rx51_smc91x_device,
|
||||
};
|
||||
|
||||
/*
|
||||
* Timings are taken from smsc-lan91c96-ms.pdf
|
||||
*/
|
||||
static int smc91x_init_gpmc(int cs)
|
||||
{
|
||||
struct gpmc_timings t;
|
||||
const int t2_r = 45; /* t2 in Figure 12.10 */
|
||||
const int t2_w = 30; /* t2 in Figure 12.11 */
|
||||
const int t3 = 15; /* t3 in Figure 12.10 */
|
||||
const int t5_r = 0; /* t5 in Figure 12.10 */
|
||||
const int t6_r = 45; /* t6 in Figure 12.10 */
|
||||
const int t6_w = 0; /* t6 in Figure 12.11 */
|
||||
const int t7_w = 15; /* t7 in Figure 12.11 */
|
||||
const int t15 = 12; /* t15 in Figure 12.2 */
|
||||
const int t20 = 185; /* t20 in Figure 12.2 */
|
||||
|
||||
memset(&t, 0, sizeof(t));
|
||||
|
||||
t.cs_on = t15;
|
||||
t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
|
||||
t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
|
||||
t.adv_on = t3; /* Figure 12.10 */
|
||||
t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
|
||||
t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
|
||||
t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
|
||||
t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
|
||||
t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
|
||||
t.we_on = t.we_off - t7_w; /* Figure 12.11 */
|
||||
t.rd_cycle = t20; /* Figure 12.2 */
|
||||
t.wr_cycle = t20; /* Figure 12.4 */
|
||||
t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
|
||||
t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
|
||||
|
||||
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
|
||||
|
||||
return gpmc_cs_set_timings(cs, &t);
|
||||
}
|
||||
|
||||
static void __init rx51_init_smc91x(void)
|
||||
{
|
||||
unsigned long cs_mem_base;
|
||||
int ret;
|
||||
|
||||
omap_cfg_reg(U8_34XX_GPIO54_DOWN);
|
||||
omap_cfg_reg(G25_34XX_GPIO86_OUT);
|
||||
omap_cfg_reg(H19_34XX_GPIO164_OUT);
|
||||
|
||||
if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
|
||||
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
|
||||
return;
|
||||
}
|
||||
|
||||
rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
|
||||
rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
|
||||
|
||||
smc91x_init_gpmc(SMC91X_CS);
|
||||
|
||||
if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
|
||||
goto free1;
|
||||
|
||||
gpio_direction_input(SMC91X_GPIO_IRQ);
|
||||
rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
|
||||
|
||||
ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
|
||||
if (ret)
|
||||
goto free2;
|
||||
gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
|
||||
|
||||
ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
|
||||
if (ret)
|
||||
goto free3;
|
||||
gpio_direction_output(SMC91X_GPIO_RESET, 0);
|
||||
gpio_set_value(SMC91X_GPIO_RESET, 1);
|
||||
msleep(100);
|
||||
gpio_set_value(SMC91X_GPIO_RESET, 0);
|
||||
|
||||
return;
|
||||
|
||||
free3:
|
||||
gpio_free(SMC91X_GPIO_PWRDWN);
|
||||
free2:
|
||||
gpio_free(SMC91X_GPIO_IRQ);
|
||||
free1:
|
||||
gpmc_cs_free(SMC91X_CS);
|
||||
|
||||
printk(KERN_ERR "Could not initialize smc91x\n");
|
||||
}
|
||||
|
||||
static struct twl4030_madc_platform_data rx51_madc_data = {
|
||||
.irq_line = 1,
|
||||
};
|
||||
|
||||
static struct twl4030_hsmmc_info mmc[] = {
|
||||
{
|
||||
.name = "external",
|
||||
.mmc = 1,
|
||||
.wires = 4,
|
||||
.cover_only = true,
|
||||
.gpio_cd = 160,
|
||||
.gpio_wp = -EINVAL,
|
||||
},
|
||||
{
|
||||
.name = "internal",
|
||||
.mmc = 2,
|
||||
.wires = 8,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply rx51_vmmc1_supply = {
|
||||
.supply = "vmmc",
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply rx51_vmmc2_supply = {
|
||||
.supply = "vmmc",
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply rx51_vsim_supply = {
|
||||
.supply = "vmmc_aux",
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vaux1 = {
|
||||
.constraints = {
|
||||
.name = "V28",
|
||||
.min_uV = 2800000,
|
||||
.max_uV = 2800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vaux2 = {
|
||||
.constraints = {
|
||||
.name = "VCSI",
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
};
|
||||
|
||||
/* VAUX3 - adds more power to VIO_18 rail */
|
||||
static struct regulator_init_data rx51_vaux3 = {
|
||||
.constraints = {
|
||||
.name = "VCAM_DIG_18",
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.apply_uV = true,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vaux4 = {
|
||||
.constraints = {
|
||||
.name = "VCAM_ANA_28",
|
||||
.min_uV = 2800000,
|
||||
.max_uV = 2800000,
|
||||
.apply_uV = true,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vmmc1 = {
|
||||
.constraints = {
|
||||
.min_uV = 1850000,
|
||||
.max_uV = 3150000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
||||
| REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &rx51_vmmc1_supply,
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vmmc2 = {
|
||||
.constraints = {
|
||||
.name = "VMMC2_30",
|
||||
.min_uV = 1850000,
|
||||
.max_uV = 3150000,
|
||||
.apply_uV = true,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
||||
| REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &rx51_vmmc2_supply,
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vsim = {
|
||||
.constraints = {
|
||||
.name = "VMMC2_IO_18",
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.apply_uV = true,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &rx51_vsim_supply,
|
||||
};
|
||||
|
||||
static struct regulator_init_data rx51_vdac = {
|
||||
.constraints = {
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
||||
| REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
};
|
||||
|
||||
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
|
||||
{
|
||||
/* FIXME this gpio setup is just a placeholder for now */
|
||||
gpio_request(gpio + 6, "backlight_pwm");
|
||||
gpio_direction_output(gpio + 6, 0);
|
||||
gpio_request(gpio + 7, "speaker_en");
|
||||
gpio_direction_output(gpio + 7, 1);
|
||||
|
||||
/* set up MMC adapters, linking their regulators to them */
|
||||
twl4030_mmc_init(mmc);
|
||||
rx51_vmmc1_supply.dev = mmc[0].dev;
|
||||
rx51_vmmc2_supply.dev = mmc[1].dev;
|
||||
rx51_vsim_supply.dev = mmc[1].dev;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct twl4030_gpio_platform_data rx51_gpio_data = {
|
||||
.gpio_base = OMAP_MAX_GPIO_LINES,
|
||||
.irq_base = TWL4030_GPIO_IRQ_BASE,
|
||||
.irq_end = TWL4030_GPIO_IRQ_END,
|
||||
.pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
|
||||
| BIT(4) | BIT(5)
|
||||
| BIT(8) | BIT(9) | BIT(10) | BIT(11)
|
||||
| BIT(12) | BIT(13) | BIT(14) | BIT(15)
|
||||
| BIT(16) | BIT(17) ,
|
||||
.setup = rx51_twlgpio_setup,
|
||||
};
|
||||
|
||||
static struct twl4030_platform_data rx51_twldata = {
|
||||
.irq_base = TWL4030_IRQ_BASE,
|
||||
.irq_end = TWL4030_IRQ_END,
|
||||
|
||||
/* platform_data for children goes here */
|
||||
.gpio = &rx51_gpio_data,
|
||||
.keypad = &rx51_kp_data,
|
||||
.madc = &rx51_madc_data,
|
||||
|
||||
.vaux1 = &rx51_vaux1,
|
||||
.vaux2 = &rx51_vaux2,
|
||||
.vaux3 = &rx51_vaux3,
|
||||
.vaux4 = &rx51_vaux4,
|
||||
.vmmc1 = &rx51_vmmc1,
|
||||
.vmmc2 = &rx51_vmmc2,
|
||||
.vsim = &rx51_vsim,
|
||||
.vdac = &rx51_vdac,
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("twl5030", 0x48),
|
||||
.flags = I2C_CLIENT_WAKE,
|
||||
.irq = INT_34XX_SYS_NIRQ,
|
||||
.platform_data = &rx51_twldata,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init rx51_i2c_init(void)
|
||||
{
|
||||
omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
|
||||
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
|
||||
omap_register_i2c_bus(2, 100, NULL, 0);
|
||||
omap_register_i2c_bus(3, 400, NULL, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
void __init rx51_peripherals_init(void)
|
||||
{
|
||||
platform_add_devices(rx51_peripherals_devices,
|
||||
ARRAY_SIZE(rx51_peripherals_devices));
|
||||
rx51_i2c_init();
|
||||
rx51_init_smc91x();
|
||||
}
|
||||
|
96
arch/arm/mach-omap2/board-rx51.c
Normal file
96
arch/arm/mach-omap2/board-rx51.c
Normal file
|
@ -0,0 +1,96 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-omap2/board-rx51.c
|
||||
*
|
||||
* Copyright (C) 2007, 2008 Nokia
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <mach/mcspi.h>
|
||||
#include <mach/mux.h>
|
||||
#include <mach/board.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/keypad.h>
|
||||
#include <mach/dma.h>
|
||||
#include <mach/gpmc.h>
|
||||
#include <mach/usb.h>
|
||||
|
||||
static struct omap_uart_config rx51_uart_config = {
|
||||
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
|
||||
};
|
||||
|
||||
static struct omap_lcd_config rx51_lcd_config = {
|
||||
.ctrl_name = "internal",
|
||||
};
|
||||
|
||||
static struct omap_fbmem_config rx51_fbmem0_config = {
|
||||
.size = 752 * 1024,
|
||||
};
|
||||
|
||||
static struct omap_fbmem_config rx51_fbmem1_config = {
|
||||
.size = 752 * 1024,
|
||||
};
|
||||
|
||||
static struct omap_fbmem_config rx51_fbmem2_config = {
|
||||
.size = 752 * 1024,
|
||||
};
|
||||
|
||||
static struct omap_board_config_kernel rx51_config[] = {
|
||||
{ OMAP_TAG_UART, &rx51_uart_config },
|
||||
{ OMAP_TAG_FBMEM, &rx51_fbmem0_config },
|
||||
{ OMAP_TAG_FBMEM, &rx51_fbmem1_config },
|
||||
{ OMAP_TAG_FBMEM, &rx51_fbmem2_config },
|
||||
{ OMAP_TAG_LCD, &rx51_lcd_config },
|
||||
};
|
||||
|
||||
static void __init rx51_init_irq(void)
|
||||
{
|
||||
omap2_init_common_hw();
|
||||
omap_init_irq();
|
||||
omap_gpio_init();
|
||||
}
|
||||
|
||||
extern void __init rx51_peripherals_init(void);
|
||||
|
||||
static void __init rx51_init(void)
|
||||
{
|
||||
omap_board_config = rx51_config;
|
||||
omap_board_config_size = ARRAY_SIZE(rx51_config);
|
||||
omap_serial_init();
|
||||
usb_musb_init();
|
||||
rx51_peripherals_init();
|
||||
}
|
||||
|
||||
static void __init rx51_map_io(void)
|
||||
{
|
||||
omap2_set_globals_343x();
|
||||
omap2_map_common_io();
|
||||
}
|
||||
|
||||
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
|
||||
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
|
||||
.phys_io = 0x48000000,
|
||||
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0x80000100,
|
||||
.map_io = rx51_map_io,
|
||||
.init_irq = rx51_init_irq,
|
||||
.init_machine = rx51_init,
|
||||
.timer = &omap_timer,
|
||||
MACHINE_END
|
Loading…
Reference in a new issue